These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / drivers / scsi / ufs / ufshci.h
1 /*
2  * Universal Flash Storage Host controller driver
3  *
4  * This code is based on drivers/scsi/ufs/ufshci.h
5  * Copyright (C) 2011-2013 Samsung India Software Operations
6  *
7  * Authors:
8  *      Santosh Yaraganavi <santosh.sy@samsung.com>
9  *      Vinayak Holikatti <h.vinayak@samsung.com>
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License
13  * as published by the Free Software Foundation; either version 2
14  * of the License, or (at your option) any later version.
15  * See the COPYING file in the top-level directory or visit
16  * <http://www.gnu.org/licenses/gpl-2.0.html>
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  *
23  * This program is provided "AS IS" and "WITH ALL FAULTS" and
24  * without warranty of any kind. You are solely responsible for
25  * determining the appropriateness of using and distributing
26  * the program and assume all risks associated with your exercise
27  * of rights with respect to the program, including but not limited
28  * to infringement of third party rights, the risks and costs of
29  * program errors, damage to or loss of data, programs or equipment,
30  * and unavailability or interruption of operations. Under no
31  * circumstances will the contributor of this Program be liable for
32  * any damages of any kind arising from your use or distribution of
33  * this program.
34  */
35
36 #ifndef _UFSHCI_H
37 #define _UFSHCI_H
38
39 enum {
40         TASK_REQ_UPIU_SIZE_DWORDS       = 8,
41         TASK_RSP_UPIU_SIZE_DWORDS       = 8,
42         ALIGNED_UPIU_SIZE               = 512,
43 };
44
45 /* UFSHCI Registers */
46 enum {
47         REG_CONTROLLER_CAPABILITIES             = 0x00,
48         REG_UFS_VERSION                         = 0x08,
49         REG_CONTROLLER_DEV_ID                   = 0x10,
50         REG_CONTROLLER_PROD_ID                  = 0x14,
51         REG_INTERRUPT_STATUS                    = 0x20,
52         REG_INTERRUPT_ENABLE                    = 0x24,
53         REG_CONTROLLER_STATUS                   = 0x30,
54         REG_CONTROLLER_ENABLE                   = 0x34,
55         REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER    = 0x38,
56         REG_UIC_ERROR_CODE_DATA_LINK_LAYER      = 0x3C,
57         REG_UIC_ERROR_CODE_NETWORK_LAYER        = 0x40,
58         REG_UIC_ERROR_CODE_TRANSPORT_LAYER      = 0x44,
59         REG_UIC_ERROR_CODE_DME                  = 0x48,
60         REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL    = 0x4C,
61         REG_UTP_TRANSFER_REQ_LIST_BASE_L        = 0x50,
62         REG_UTP_TRANSFER_REQ_LIST_BASE_H        = 0x54,
63         REG_UTP_TRANSFER_REQ_DOOR_BELL          = 0x58,
64         REG_UTP_TRANSFER_REQ_LIST_CLEAR         = 0x5C,
65         REG_UTP_TRANSFER_REQ_LIST_RUN_STOP      = 0x60,
66         REG_UTP_TASK_REQ_LIST_BASE_L            = 0x70,
67         REG_UTP_TASK_REQ_LIST_BASE_H            = 0x74,
68         REG_UTP_TASK_REQ_DOOR_BELL              = 0x78,
69         REG_UTP_TASK_REQ_LIST_CLEAR             = 0x7C,
70         REG_UTP_TASK_REQ_LIST_RUN_STOP          = 0x80,
71         REG_UIC_COMMAND                         = 0x90,
72         REG_UIC_COMMAND_ARG_1                   = 0x94,
73         REG_UIC_COMMAND_ARG_2                   = 0x98,
74         REG_UIC_COMMAND_ARG_3                   = 0x9C,
75 };
76
77 /* Controller capability masks */
78 enum {
79         MASK_TRANSFER_REQUESTS_SLOTS            = 0x0000001F,
80         MASK_TASK_MANAGEMENT_REQUEST_SLOTS      = 0x00070000,
81         MASK_64_ADDRESSING_SUPPORT              = 0x01000000,
82         MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
83         MASK_UIC_DME_TEST_MODE_SUPPORT          = 0x04000000,
84 };
85
86 /* UFS Version 08h */
87 #define MINOR_VERSION_NUM_MASK          UFS_MASK(0xFFFF, 0)
88 #define MAJOR_VERSION_NUM_MASK          UFS_MASK(0xFFFF, 16)
89
90 /* Controller UFSHCI version */
91 enum {
92         UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */
93         UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
94         UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
95 };
96
97 /*
98  * HCDDID - Host Controller Identification Descriptor
99  *        - Device ID and Device Class 10h
100  */
101 #define DEVICE_CLASS    UFS_MASK(0xFFFF, 0)
102 #define DEVICE_ID       UFS_MASK(0xFF, 24)
103
104 /*
105  * HCPMID - Host Controller Identification Descriptor
106  *        - Product/Manufacturer ID  14h
107  */
108 #define MANUFACTURE_ID_MASK     UFS_MASK(0xFFFF, 0)
109 #define PRODUCT_ID_MASK         UFS_MASK(0xFFFF, 16)
110
111 #define UFS_BIT(x)      (1L << (x))
112
113 #define UTP_TRANSFER_REQ_COMPL                  UFS_BIT(0)
114 #define UIC_DME_END_PT_RESET                    UFS_BIT(1)
115 #define UIC_ERROR                               UFS_BIT(2)
116 #define UIC_TEST_MODE                           UFS_BIT(3)
117 #define UIC_POWER_MODE                          UFS_BIT(4)
118 #define UIC_HIBERNATE_EXIT                      UFS_BIT(5)
119 #define UIC_HIBERNATE_ENTER                     UFS_BIT(6)
120 #define UIC_LINK_LOST                           UFS_BIT(7)
121 #define UIC_LINK_STARTUP                        UFS_BIT(8)
122 #define UTP_TASK_REQ_COMPL                      UFS_BIT(9)
123 #define UIC_COMMAND_COMPL                       UFS_BIT(10)
124 #define DEVICE_FATAL_ERROR                      UFS_BIT(11)
125 #define CONTROLLER_FATAL_ERROR                  UFS_BIT(16)
126 #define SYSTEM_BUS_FATAL_ERROR                  UFS_BIT(17)
127
128 #define UFSHCD_UIC_PWR_MASK     (UIC_HIBERNATE_ENTER |\
129                                 UIC_HIBERNATE_EXIT |\
130                                 UIC_POWER_MODE)
131
132 #define UFSHCD_UIC_MASK         (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
133
134 #define UFSHCD_ERROR_MASK       (UIC_ERROR |\
135                                 DEVICE_FATAL_ERROR |\
136                                 CONTROLLER_FATAL_ERROR |\
137                                 SYSTEM_BUS_FATAL_ERROR)
138
139 #define INT_FATAL_ERRORS        (DEVICE_FATAL_ERROR |\
140                                 CONTROLLER_FATAL_ERROR |\
141                                 SYSTEM_BUS_FATAL_ERROR)
142
143 /* HCS - Host Controller Status 30h */
144 #define DEVICE_PRESENT                          UFS_BIT(0)
145 #define UTP_TRANSFER_REQ_LIST_READY             UFS_BIT(1)
146 #define UTP_TASK_REQ_LIST_READY                 UFS_BIT(2)
147 #define UIC_COMMAND_READY                       UFS_BIT(3)
148 #define HOST_ERROR_INDICATOR                    UFS_BIT(4)
149 #define DEVICE_ERROR_INDICATOR                  UFS_BIT(5)
150 #define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK   UFS_MASK(0x7, 8)
151
152 enum {
153         PWR_OK          = 0x0,
154         PWR_LOCAL       = 0x01,
155         PWR_REMOTE      = 0x02,
156         PWR_BUSY        = 0x03,
157         PWR_ERROR_CAP   = 0x04,
158         PWR_FATAL_ERROR = 0x05,
159 };
160
161 /* HCE - Host Controller Enable 34h */
162 #define CONTROLLER_ENABLE       UFS_BIT(0)
163 #define CONTROLLER_DISABLE      0x0
164
165 /* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
166 #define UIC_PHY_ADAPTER_LAYER_ERROR                     UFS_BIT(31)
167 #define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK           0x1F
168
169 /* UECDL - Host UIC Error Code Data Link Layer 3Ch */
170 #define UIC_DATA_LINK_LAYER_ERROR               UFS_BIT(31)
171 #define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK     0x7FFF
172 #define UIC_DATA_LINK_LAYER_ERROR_PA_INIT       0x2000
173
174 /* UECN - Host UIC Error Code Network Layer 40h */
175 #define UIC_NETWORK_LAYER_ERROR                 UFS_BIT(31)
176 #define UIC_NETWORK_LAYER_ERROR_CODE_MASK       0x7
177
178 /* UECT - Host UIC Error Code Transport Layer 44h */
179 #define UIC_TRANSPORT_LAYER_ERROR               UFS_BIT(31)
180 #define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK     0x7F
181
182 /* UECDME - Host UIC Error Code DME 48h */
183 #define UIC_DME_ERROR                   UFS_BIT(31)
184 #define UIC_DME_ERROR_CODE_MASK         0x1
185
186 #define INT_AGGR_TIMEOUT_VAL_MASK               0xFF
187 #define INT_AGGR_COUNTER_THRESHOLD_MASK         UFS_MASK(0x1F, 8)
188 #define INT_AGGR_COUNTER_AND_TIMER_RESET        UFS_BIT(16)
189 #define INT_AGGR_STATUS_BIT                     UFS_BIT(20)
190 #define INT_AGGR_PARAM_WRITE                    UFS_BIT(24)
191 #define INT_AGGR_ENABLE                         UFS_BIT(31)
192
193 /* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
194 #define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT      UFS_BIT(0)
195
196 /* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
197 #define UTP_TASK_REQ_LIST_RUN_STOP_BIT          UFS_BIT(0)
198
199 /* UICCMD - UIC Command */
200 #define COMMAND_OPCODE_MASK             0xFF
201 #define GEN_SELECTOR_INDEX_MASK         0xFFFF
202
203 #define MIB_ATTRIBUTE_MASK              UFS_MASK(0xFFFF, 16)
204 #define RESET_LEVEL                     0xFF
205
206 #define ATTR_SET_TYPE_MASK              UFS_MASK(0xFF, 16)
207 #define CONFIG_RESULT_CODE_MASK         0xFF
208 #define GENERIC_ERROR_CODE_MASK         0xFF
209
210 /* GenSelectorIndex calculation macros for M-PHY attributes */
211 #define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
212
213 #define UIC_ARG_MIB_SEL(attr, sel)      ((((attr) & 0xFFFF) << 16) |\
214                                          ((sel) & 0xFFFF))
215 #define UIC_ARG_MIB(attr)               UIC_ARG_MIB_SEL(attr, 0)
216 #define UIC_ARG_ATTR_TYPE(t)            (((t) & 0xFF) << 16)
217 #define UIC_GET_ATTR_ID(v)              (((v) >> 16) & 0xFFFF)
218
219 /* UIC Commands */
220 enum uic_cmd_dme {
221         UIC_CMD_DME_GET                 = 0x01,
222         UIC_CMD_DME_SET                 = 0x02,
223         UIC_CMD_DME_PEER_GET            = 0x03,
224         UIC_CMD_DME_PEER_SET            = 0x04,
225         UIC_CMD_DME_POWERON             = 0x10,
226         UIC_CMD_DME_POWEROFF            = 0x11,
227         UIC_CMD_DME_ENABLE              = 0x12,
228         UIC_CMD_DME_RESET               = 0x14,
229         UIC_CMD_DME_END_PT_RST          = 0x15,
230         UIC_CMD_DME_LINK_STARTUP        = 0x16,
231         UIC_CMD_DME_HIBER_ENTER         = 0x17,
232         UIC_CMD_DME_HIBER_EXIT          = 0x18,
233         UIC_CMD_DME_TEST_MODE           = 0x1A,
234 };
235
236 /* UIC Config result code / Generic error code */
237 enum {
238         UIC_CMD_RESULT_SUCCESS                  = 0x00,
239         UIC_CMD_RESULT_INVALID_ATTR             = 0x01,
240         UIC_CMD_RESULT_FAILURE                  = 0x01,
241         UIC_CMD_RESULT_INVALID_ATTR_VALUE       = 0x02,
242         UIC_CMD_RESULT_READ_ONLY_ATTR           = 0x03,
243         UIC_CMD_RESULT_WRITE_ONLY_ATTR          = 0x04,
244         UIC_CMD_RESULT_BAD_INDEX                = 0x05,
245         UIC_CMD_RESULT_LOCKED_ATTR              = 0x06,
246         UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX   = 0x07,
247         UIC_CMD_RESULT_PEER_COMM_FAILURE        = 0x08,
248         UIC_CMD_RESULT_BUSY                     = 0x09,
249         UIC_CMD_RESULT_DME_FAILURE              = 0x0A,
250 };
251
252 #define MASK_UIC_COMMAND_RESULT                 0xFF
253
254 #define INT_AGGR_COUNTER_THLD_VAL(c)    (((c) & 0x1F) << 8)
255 #define INT_AGGR_TIMEOUT_VAL(t)         (((t) & 0xFF) << 0)
256
257 /* Interrupt disable masks */
258 enum {
259         /* Interrupt disable mask for UFSHCI v1.0 */
260         INTERRUPT_MASK_ALL_VER_10       = 0x30FFF,
261         INTERRUPT_MASK_RW_VER_10        = 0x30000,
262
263         /* Interrupt disable mask for UFSHCI v1.1 */
264         INTERRUPT_MASK_ALL_VER_11       = 0x31FFF,
265 };
266
267 /*
268  * Request Descriptor Definitions
269  */
270
271 /* Transfer request command type */
272 enum {
273         UTP_CMD_TYPE_SCSI               = 0x0,
274         UTP_CMD_TYPE_UFS                = 0x1,
275         UTP_CMD_TYPE_DEV_MANAGE         = 0x2,
276 };
277
278 enum {
279         UTP_SCSI_COMMAND                = 0x00000000,
280         UTP_NATIVE_UFS_COMMAND          = 0x10000000,
281         UTP_DEVICE_MANAGEMENT_FUNCTION  = 0x20000000,
282         UTP_REQ_DESC_INT_CMD            = 0x01000000,
283 };
284
285 /* UTP Transfer Request Data Direction (DD) */
286 enum {
287         UTP_NO_DATA_TRANSFER    = 0x00000000,
288         UTP_HOST_TO_DEVICE      = 0x02000000,
289         UTP_DEVICE_TO_HOST      = 0x04000000,
290 };
291
292 /* Overall command status values */
293 enum {
294         OCS_SUCCESS                     = 0x0,
295         OCS_INVALID_CMD_TABLE_ATTR      = 0x1,
296         OCS_INVALID_PRDT_ATTR           = 0x2,
297         OCS_MISMATCH_DATA_BUF_SIZE      = 0x3,
298         OCS_MISMATCH_RESP_UPIU_SIZE     = 0x4,
299         OCS_PEER_COMM_FAILURE           = 0x5,
300         OCS_ABORTED                     = 0x6,
301         OCS_FATAL_ERROR                 = 0x7,
302         OCS_INVALID_COMMAND_STATUS      = 0x0F,
303         MASK_OCS                        = 0x0F,
304 };
305
306 /* The maximum length of the data byte count field in the PRDT is 256KB */
307 #define PRDT_DATA_BYTE_COUNT_MAX        (256 * 1024)
308 /* The granularity of the data byte count field in the PRDT is 32-bit */
309 #define PRDT_DATA_BYTE_COUNT_PAD        4
310
311 /**
312  * struct ufshcd_sg_entry - UFSHCI PRD Entry
313  * @base_addr: Lower 32bit physical address DW-0
314  * @upper_addr: Upper 32bit physical address DW-1
315  * @reserved: Reserved for future use DW-2
316  * @size: size of physical segment DW-3
317  */
318 struct ufshcd_sg_entry {
319         __le32    base_addr;
320         __le32    upper_addr;
321         __le32    reserved;
322         __le32    size;
323 };
324
325 /**
326  * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
327  * @command_upiu: Command UPIU Frame address
328  * @response_upiu: Response UPIU Frame address
329  * @prd_table: Physical Region Descriptor
330  */
331 struct utp_transfer_cmd_desc {
332         u8 command_upiu[ALIGNED_UPIU_SIZE];
333         u8 response_upiu[ALIGNED_UPIU_SIZE];
334         struct ufshcd_sg_entry    prd_table[SG_ALL];
335 };
336
337 /**
338  * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
339  * @dword0: Descriptor Header DW0
340  * @dword1: Descriptor Header DW1
341  * @dword2: Descriptor Header DW2
342  * @dword3: Descriptor Header DW3
343  */
344 struct request_desc_header {
345         __le32 dword_0;
346         __le32 dword_1;
347         __le32 dword_2;
348         __le32 dword_3;
349 };
350
351 /**
352  * struct utp_transfer_req_desc - UTRD structure
353  * @header: UTRD header DW-0 to DW-3
354  * @command_desc_base_addr_lo: UCD base address low DW-4
355  * @command_desc_base_addr_hi: UCD base address high DW-5
356  * @response_upiu_length: response UPIU length DW-6
357  * @response_upiu_offset: response UPIU offset DW-6
358  * @prd_table_length: Physical region descriptor length DW-7
359  * @prd_table_offset: Physical region descriptor offset DW-7
360  */
361 struct utp_transfer_req_desc {
362
363         /* DW 0-3 */
364         struct request_desc_header header;
365
366         /* DW 4-5*/
367         __le32  command_desc_base_addr_lo;
368         __le32  command_desc_base_addr_hi;
369
370         /* DW 6 */
371         __le16  response_upiu_length;
372         __le16  response_upiu_offset;
373
374         /* DW 7 */
375         __le16  prd_table_length;
376         __le16  prd_table_offset;
377 };
378
379 /**
380  * struct utp_task_req_desc - UTMRD structure
381  * @header: UTMRD header DW-0 to DW-3
382  * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11
383  * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19
384  */
385 struct utp_task_req_desc {
386
387         /* DW 0-3 */
388         struct request_desc_header header;
389
390         /* DW 4-11 */
391         __le32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS];
392
393         /* DW 12-19 */
394         __le32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS];
395 };
396
397 #endif /* End of Header */