kernel/drivers/scsi/qla4xxx/ql4_mbx.c

   1 /*
   2  * QLogic iSCSI HBA Driver
   3  * Copyright (c)  2003-2013 QLogic Corporation
   4  *
   5  * See LICENSE.qla4xxx for copyright and licensing details.
   6  */
   7
   8 #include <linux/ctype.h>
   9 #include "ql4_def.h"
  10 #include "ql4_glbl.h"
  11 #include "ql4_dbg.h"
  12 #include "ql4_inline.h"
  13 #include "ql4_version.h"
  14
  15 void qla4xxx_queue_mbox_cmd(struct scsi_qla_host *ha, uint32_t *mbx_cmd,
  16                             int in_count)
  17 {
  18         int i;
  19
  20         /* Load all mailbox registers, except mailbox 0. */
  21         for (i = 1; i < in_count; i++)
  22                 writel(mbx_cmd[i], &ha->reg->mailbox[i]);
  23
  24         /* Wakeup firmware  */
  25         writel(mbx_cmd[0], &ha->reg->mailbox[0]);
  26         readl(&ha->reg->mailbox[0]);
  27         writel(set_rmask(CSR_INTR_RISC), &ha->reg->ctrl_status);
  28         readl(&ha->reg->ctrl_status);
  29 }
  30
  31 void qla4xxx_process_mbox_intr(struct scsi_qla_host *ha, int out_count)
  32 {
  33         int intr_status;
  34
  35         intr_status = readl(&ha->reg->ctrl_status);
  36         if (intr_status & INTR_PENDING) {
  37                 /*
  38                  * Service the interrupt.
  39                  * The ISR will save the mailbox status registers
  40                  * to a temporary storage location in the adapter structure.
  41                  */
  42                 ha->mbox_status_count = out_count;
  43                 ha->isp_ops->interrupt_service_routine(ha, intr_status);
  44         }
  45 }
  46
  47 /**
  48  * qla4xxx_is_intr_poll_mode – Are we allowed to poll for interrupts?
  49  * @ha: Pointer to host adapter structure.
  50  * @ret: 1=polling mode, 0=non-polling mode
  51  **/
  52 static int qla4xxx_is_intr_poll_mode(struct scsi_qla_host *ha)
  53 {
  54         int rval = 1;
  55
  56         if (is_qla8032(ha) || is_qla8042(ha)) {
  57                 if (test_bit(AF_IRQ_ATTACHED, &ha->flags) &&
  58                     test_bit(AF_83XX_MBOX_INTR_ON, &ha->flags))
  59                         rval = 0;
  60         } else {
  61                 if (test_bit(AF_IRQ_ATTACHED, &ha->flags) &&
  62                     test_bit(AF_INTERRUPTS_ON, &ha->flags) &&
  63                     test_bit(AF_ONLINE, &ha->flags) &&
  64                     !test_bit(AF_HA_REMOVAL, &ha->flags))
  65                         rval = 0;
  66         }
  67
  68         return rval;
  69 }
  70
  71 /**
  72  * qla4xxx_mailbox_command - issues mailbox commands
  73  * @ha: Pointer to host adapter structure.
  74  * @inCount: number of mailbox registers to load.
  75  * @outCount: number of mailbox registers to return.
  76  * @mbx_cmd: data pointer for mailbox in registers.
  77  * @mbx_sts: data pointer for mailbox out registers.
  78  *
  79  * This routine issue mailbox commands and waits for completion.
  80  * If outCount is 0, this routine completes successfully WITHOUT waiting
  81  * for the mailbox command to complete.
  82  **/
  83 int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
  84                             uint8_t outCount, uint32_t *mbx_cmd,
  85                             uint32_t *mbx_sts)
  86 {
  87         int status = QLA_ERROR;
  88         uint8_t i;
  89         u_long wait_count;
  90         unsigned long flags = 0;
  91         uint32_t dev_state;
  92
  93         /* Make sure that pointers are valid */
  94         if (!mbx_cmd || !mbx_sts) {
  95                 DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
  96                               "pointer\n", ha->host_no, __func__));
  97                 return status;
  98         }
  99
 100         if (is_qla40XX(ha)) {
 101                 if (test_bit(AF_HA_REMOVAL, &ha->flags)) {
 102                         DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: "
 103                                           "prematurely completing mbx cmd as "
 104                                           "adapter removal detected\n",
 105                                           ha->host_no, __func__));
 106                         return status;
 107                 }
 108         }
 109
 110         if ((is_aer_supported(ha)) &&
 111             (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))) {
 112                 DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, "
 113                     "timeout MBX Exiting.\n", ha->host_no, __func__));
 114                 return status;
 115         }
 116
 117         /* Mailbox code active */
 118         wait_count = MBOX_TOV * 100;
 119
 120         while (wait_count--) {
 121                 mutex_lock(&ha->mbox_sem);
 122                 if (!test_bit(AF_MBOX_COMMAND, &ha->flags)) {
 123                         set_bit(AF_MBOX_COMMAND, &ha->flags);
 124                         mutex_unlock(&ha->mbox_sem);
 125                         break;
 126                 }
 127                 mutex_unlock(&ha->mbox_sem);
 128                 if (!wait_count) {
 129                         DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n",
 130                                 ha->host_no, __func__));
 131                         return status;
 132                 }
 133                 msleep(10);
 134         }
 135
 136         if (is_qla80XX(ha)) {
 137                 if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
 138                         DEBUG2(ql4_printk(KERN_WARNING, ha,
 139                                           "scsi%ld: %s: prematurely completing mbx cmd as firmware recovery detected\n",
 140                                           ha->host_no, __func__));
 141                         goto mbox_exit;
 142                 }
 143                 /* Do not send any mbx cmd if h/w is in failed state*/
 144                 ha->isp_ops->idc_lock(ha);
 145                 dev_state = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DEV_STATE);
 146                 ha->isp_ops->idc_unlock(ha);
 147                 if (dev_state == QLA8XXX_DEV_FAILED) {
 148                         ql4_printk(KERN_WARNING, ha,
 149                                    "scsi%ld: %s: H/W is in failed state, do not send any mailbox commands\n",
 150                                    ha->host_no, __func__);
 151                         goto mbox_exit;
 152                 }
 153         }
 154
 155         spin_lock_irqsave(&ha->hardware_lock, flags);
 156
 157         ha->mbox_status_count = outCount;
 158         for (i = 0; i < outCount; i++)
 159                 ha->mbox_status[i] = 0;
 160
 161         /* Queue the mailbox command to the firmware */
 162         ha->isp_ops->queue_mailbox_command(ha, mbx_cmd, inCount);
 163
 164         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 165
 166         /* Wait for completion */
 167
 168         /*
 169          * If we don't want status, don't wait for the mailbox command to
 170          * complete.  For example, MBOX_CMD_RESET_FW doesn't return status,
 171          * you must poll the inbound Interrupt Mask for completion.
 172          */
 173         if (outCount == 0) {
 174                 status = QLA_SUCCESS;
 175                 goto mbox_exit;
 176         }
 177
 178         /*
 179          * Wait for completion: Poll or completion queue
 180          */
 181         if (qla4xxx_is_intr_poll_mode(ha)) {
 182                 /* Poll for command to complete */
 183                 wait_count = jiffies + MBOX_TOV * HZ;
 184                 while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
 185                         if (time_after_eq(jiffies, wait_count))
 186                                 break;
 187                         /*
 188                          * Service the interrupt.
 189                          * The ISR will save the mailbox status registers
 190                          * to a temporary storage location in the adapter
 191                          * structure.
 192                          */
 193                         spin_lock_irqsave(&ha->hardware_lock, flags);
 194                         ha->isp_ops->process_mailbox_interrupt(ha, outCount);
 195                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 196                         msleep(10);
 197                 }
 198         } else {
 199                 /* Do not poll for completion. Use completion queue */
 200                 set_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags);
 201                 wait_for_completion_timeout(&ha->mbx_intr_comp, MBOX_TOV * HZ);
 202                 clear_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags);
 203         }
 204
 205         /* Check for mailbox timeout. */
 206         if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
 207                 if (is_qla80XX(ha) &&
 208                     test_bit(AF_FW_RECOVERY, &ha->flags)) {
 209                         DEBUG2(ql4_printk(KERN_INFO, ha,
 210                             "scsi%ld: %s: prematurely completing mbx cmd as "
 211                             "firmware recovery detected\n",
 212                             ha->host_no, __func__));
 213                         goto mbox_exit;
 214                 }
 215                 ql4_printk(KERN_WARNING, ha, "scsi%ld: Mailbox Cmd 0x%08X timed out, Scheduling Adapter Reset\n",
 216                            ha->host_no, mbx_cmd[0]);
 217                 ha->mailbox_timeout_count++;
 218                 mbx_sts[0] = (-1);
 219                 set_bit(DPC_RESET_HA, &ha->dpc_flags);
 220                 if (is_qla8022(ha)) {
 221                         ql4_printk(KERN_INFO, ha,
 222                                    "disabling pause transmit on port 0 & 1.\n");
 223                         qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
 224                                         CRB_NIU_XG_PAUSE_CTL_P0 |
 225                                         CRB_NIU_XG_PAUSE_CTL_P1);
 226                 } else if (is_qla8032(ha) || is_qla8042(ha)) {
 227                         ql4_printk(KERN_INFO, ha, " %s: disabling pause transmit on port 0 & 1.\n",
 228                                    __func__);
 229                         qla4_83xx_disable_pause(ha);
 230                 }
 231                 goto mbox_exit;
 232         }
 233
 234         /*
 235          * Copy the mailbox out registers to the caller's mailbox in/out
 236          * structure.
 237          */
 238         spin_lock_irqsave(&ha->hardware_lock, flags);
 239         for (i = 0; i < outCount; i++)
 240                 mbx_sts[i] = ha->mbox_status[i];
 241
 242         /* Set return status and error flags (if applicable). */
 243         switch (ha->mbox_status[0]) {
 244         case MBOX_STS_COMMAND_COMPLETE:
 245                 status = QLA_SUCCESS;
 246                 break;
 247
 248         case MBOX_STS_INTERMEDIATE_COMPLETION:
 249                 status = QLA_SUCCESS;
 250                 break;
 251
 252         case MBOX_STS_BUSY:
 253                 ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cmd = %08X, ISP BUSY\n",
 254                            ha->host_no, __func__, mbx_cmd[0]);
 255                 ha->mailbox_timeout_count++;
 256                 break;
 257
 258         default:
 259                 ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: FAILED, MBOX CMD = %08X, MBOX STS = %08X %08X %08X %08X %08X %08X %08X %08X\n",
 260                            ha->host_no, __func__, mbx_cmd[0], mbx_sts[0],
 261                            mbx_sts[1], mbx_sts[2], mbx_sts[3], mbx_sts[4],
 262                            mbx_sts[5], mbx_sts[6], mbx_sts[7]);
 263                 break;
 264         }
 265         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 266
 267 mbox_exit:
 268         mutex_lock(&ha->mbox_sem);
 269         clear_bit(AF_MBOX_COMMAND, &ha->flags);
 270         mutex_unlock(&ha->mbox_sem);
 271         clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
 272
 273         return status;
 274 }
 275
 276 /**
 277  * qla4xxx_get_minidump_template - Get the firmware template
 278  * @ha: Pointer to host adapter structure.
 279  * @phys_addr: dma address for template
 280  *
 281  * Obtain the minidump template from firmware during initialization
 282  * as it may not be available when minidump is desired.
 283  **/
 284 int qla4xxx_get_minidump_template(struct scsi_qla_host *ha,
 285                                   dma_addr_t phys_addr)
 286 {
 287         uint32_t mbox_cmd[MBOX_REG_COUNT];
 288         uint32_t mbox_sts[MBOX_REG_COUNT];
 289         int status;
 290
 291         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 292         memset(&mbox_sts, 0, sizeof(mbox_sts));
 293
 294         mbox_cmd[0] = MBOX_CMD_MINIDUMP;
 295         mbox_cmd[1] = MINIDUMP_GET_TMPLT_SUBCOMMAND;
 296         mbox_cmd[2] = LSDW(phys_addr);
 297         mbox_cmd[3] = MSDW(phys_addr);
 298         mbox_cmd[4] = ha->fw_dump_tmplt_size;
 299         mbox_cmd[5] = 0;
 300
 301         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
 302                                          &mbox_sts[0]);
 303         if (status != QLA_SUCCESS) {
 304                 DEBUG2(ql4_printk(KERN_INFO, ha,
 305                                   "scsi%ld: %s: Cmd = %08X, mbx[0] = 0x%04x, mbx[1] = 0x%04x\n",
 306                                   ha->host_no, __func__, mbox_cmd[0],
 307                                   mbox_sts[0], mbox_sts[1]));
 308         }
 309         return status;
 310 }
 311
 312 /**
 313  * qla4xxx_req_template_size - Get minidump template size from firmware.
 314  * @ha: Pointer to host adapter structure.
 315  **/
 316 int qla4xxx_req_template_size(struct scsi_qla_host *ha)
 317 {
 318         uint32_t mbox_cmd[MBOX_REG_COUNT];
 319         uint32_t mbox_sts[MBOX_REG_COUNT];
 320         int status;
 321
 322         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 323         memset(&mbox_sts, 0, sizeof(mbox_sts));
 324
 325         mbox_cmd[0] = MBOX_CMD_MINIDUMP;
 326         mbox_cmd[1] = MINIDUMP_GET_SIZE_SUBCOMMAND;
 327
 328         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0],
 329                                          &mbox_sts[0]);
 330         if (status == QLA_SUCCESS) {
 331                 ha->fw_dump_tmplt_size = mbox_sts[1];
 332                 DEBUG2(ql4_printk(KERN_INFO, ha,
 333                                   "%s: sts[0]=0x%04x, template  size=0x%04x, size_cm_02=0x%04x, size_cm_04=0x%04x, size_cm_08=0x%04x, size_cm_10=0x%04x, size_cm_FF=0x%04x, version=0x%04x\n",
 334                                   __func__, mbox_sts[0], mbox_sts[1],
 335                                   mbox_sts[2], mbox_sts[3], mbox_sts[4],
 336                                   mbox_sts[5], mbox_sts[6], mbox_sts[7]));
 337                 if (ha->fw_dump_tmplt_size == 0)
 338                         status = QLA_ERROR;
 339         } else {
 340                 ql4_printk(KERN_WARNING, ha,
 341                            "%s: Error sts[0]=0x%04x, mbx[1]=0x%04x\n",
 342                            __func__, mbox_sts[0], mbox_sts[1]);
 343                 status = QLA_ERROR;
 344         }
 345
 346         return status;
 347 }
 348
 349 void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha)
 350 {
 351         set_bit(AF_FW_RECOVERY, &ha->flags);
 352         ql4_printk(KERN_INFO, ha, "scsi%ld: %s: set FW RECOVERY!\n",
 353             ha->host_no, __func__);
 354
 355         if (test_bit(AF_MBOX_COMMAND, &ha->flags)) {
 356                 if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags)) {
 357                         complete(&ha->mbx_intr_comp);
 358                         ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
 359                             "recovery, doing premature completion of "
 360                             "mbx cmd\n", ha->host_no, __func__);
 361
 362                 } else {
 363                         set_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
 364                         ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
 365                             "recovery, doing premature completion of "
 366                             "polling mbx cmd\n", ha->host_no, __func__);
 367                 }
 368         }
 369 }
 370
 371 static uint8_t
 372 qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 373                  uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
 374 {
 375         memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
 376         memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
 377
 378         if (is_qla8022(ha))
 379                 qla4_82xx_wr_32(ha, ha->nx_db_wr_ptr, 0);
 380
 381         mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
 382         mbox_cmd[1] = 0;
 383         mbox_cmd[2] = LSDW(init_fw_cb_dma);
 384         mbox_cmd[3] = MSDW(init_fw_cb_dma);
 385         mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
 386
 387         if (qla4xxx_mailbox_command(ha, 6, 6, mbox_cmd, mbox_sts) !=
 388             QLA_SUCCESS) {
 389                 DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
 390                               "MBOX_CMD_INITIALIZE_FIRMWARE"
 391                               " failed w/ status %04X\n",
 392                               ha->host_no, __func__, mbox_sts[0]));
 393                 return QLA_ERROR;
 394         }
 395         return QLA_SUCCESS;
 396 }
 397
 398 uint8_t
 399 qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 400                  uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
 401 {
 402         memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
 403         memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
 404         mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
 405         mbox_cmd[2] = LSDW(init_fw_cb_dma);
 406         mbox_cmd[3] = MSDW(init_fw_cb_dma);
 407         mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
 408
 409         if (qla4xxx_mailbox_command(ha, 5, 5, mbox_cmd, mbox_sts) !=
 410             QLA_SUCCESS) {
 411                 DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
 412                               "MBOX_CMD_GET_INIT_FW_CTRL_BLOCK"
 413                               " failed w/ status %04X\n",
 414                               ha->host_no, __func__, mbox_sts[0]));
 415                 return QLA_ERROR;
 416         }
 417         return QLA_SUCCESS;
 418 }
 419
 420 uint8_t qla4xxx_set_ipaddr_state(uint8_t fw_ipaddr_state)
 421 {
 422         uint8_t ipaddr_state;
 423
 424         switch (fw_ipaddr_state) {
 425         case IP_ADDRSTATE_UNCONFIGURED:
 426                 ipaddr_state = ISCSI_IPDDRESS_STATE_UNCONFIGURED;
 427                 break;
 428         case IP_ADDRSTATE_INVALID:
 429                 ipaddr_state = ISCSI_IPDDRESS_STATE_INVALID;
 430                 break;
 431         case IP_ADDRSTATE_ACQUIRING:
 432                 ipaddr_state = ISCSI_IPDDRESS_STATE_ACQUIRING;
 433                 break;
 434         case IP_ADDRSTATE_TENTATIVE:
 435                 ipaddr_state = ISCSI_IPDDRESS_STATE_TENTATIVE;
 436                 break;
 437         case IP_ADDRSTATE_DEPRICATED:
 438                 ipaddr_state = ISCSI_IPDDRESS_STATE_DEPRECATED;
 439                 break;
 440         case IP_ADDRSTATE_PREFERRED:
 441                 ipaddr_state = ISCSI_IPDDRESS_STATE_VALID;
 442                 break;
 443         case IP_ADDRSTATE_DISABLING:
 444                 ipaddr_state = ISCSI_IPDDRESS_STATE_DISABLING;
 445                 break;
 446         default:
 447                 ipaddr_state = ISCSI_IPDDRESS_STATE_UNCONFIGURED;
 448         }
 449         return ipaddr_state;
 450 }
 451
 452 static void
 453 qla4xxx_update_local_ip(struct scsi_qla_host *ha,
 454                         struct addr_ctrl_blk *init_fw_cb)
 455 {
 456         ha->ip_config.tcp_options = le16_to_cpu(init_fw_cb->ipv4_tcp_opts);
 457         ha->ip_config.ipv4_options = le16_to_cpu(init_fw_cb->ipv4_ip_opts);
 458         ha->ip_config.ipv4_addr_state =
 459                         qla4xxx_set_ipaddr_state(init_fw_cb->ipv4_addr_state);
 460         ha->ip_config.eth_mtu_size =
 461                                 le16_to_cpu(init_fw_cb->eth_mtu_size);
 462         ha->ip_config.ipv4_port = le16_to_cpu(init_fw_cb->ipv4_port);
 463
 464         if (ha->acb_version == ACB_SUPPORTED) {
 465                 ha->ip_config.ipv6_options = le16_to_cpu(init_fw_cb->ipv6_opts);
 466                 ha->ip_config.ipv6_addl_options =
 467                                 le16_to_cpu(init_fw_cb->ipv6_addtl_opts);
 468                 ha->ip_config.ipv6_tcp_options =
 469                                 le16_to_cpu(init_fw_cb->ipv6_tcp_opts);
 470         }
 471
 472         /* Save IPv4 Address Info */
 473         memcpy(ha->ip_config.ip_address, init_fw_cb->ipv4_addr,
 474                min(sizeof(ha->ip_config.ip_address),
 475                    sizeof(init_fw_cb->ipv4_addr)));
 476         memcpy(ha->ip_config.subnet_mask, init_fw_cb->ipv4_subnet,
 477                min(sizeof(ha->ip_config.subnet_mask),
 478                    sizeof(init_fw_cb->ipv4_subnet)));
 479         memcpy(ha->ip_config.gateway, init_fw_cb->ipv4_gw_addr,
 480                min(sizeof(ha->ip_config.gateway),
 481                    sizeof(init_fw_cb->ipv4_gw_addr)));
 482
 483         ha->ip_config.ipv4_vlan_tag = be16_to_cpu(init_fw_cb->ipv4_vlan_tag);
 484         ha->ip_config.control = init_fw_cb->control;
 485         ha->ip_config.tcp_wsf = init_fw_cb->ipv4_tcp_wsf;
 486         ha->ip_config.ipv4_tos = init_fw_cb->ipv4_tos;
 487         ha->ip_config.ipv4_cache_id = init_fw_cb->ipv4_cacheid;
 488         ha->ip_config.ipv4_alt_cid_len = init_fw_cb->ipv4_dhcp_alt_cid_len;
 489         memcpy(ha->ip_config.ipv4_alt_cid, init_fw_cb->ipv4_dhcp_alt_cid,
 490                min(sizeof(ha->ip_config.ipv4_alt_cid),
 491                    sizeof(init_fw_cb->ipv4_dhcp_alt_cid)));
 492         ha->ip_config.ipv4_vid_len = init_fw_cb->ipv4_dhcp_vid_len;
 493         memcpy(ha->ip_config.ipv4_vid, init_fw_cb->ipv4_dhcp_vid,
 494                min(sizeof(ha->ip_config.ipv4_vid),
 495                    sizeof(init_fw_cb->ipv4_dhcp_vid)));
 496         ha->ip_config.ipv4_ttl = init_fw_cb->ipv4_ttl;
 497         ha->ip_config.def_timeout = le16_to_cpu(init_fw_cb->def_timeout);
 498         ha->ip_config.abort_timer = init_fw_cb->abort_timer;
 499         ha->ip_config.iscsi_options = le16_to_cpu(init_fw_cb->iscsi_opts);
 500         ha->ip_config.iscsi_max_pdu_size =
 501                                 le16_to_cpu(init_fw_cb->iscsi_max_pdu_size);
 502         ha->ip_config.iscsi_first_burst_len =
 503                                 le16_to_cpu(init_fw_cb->iscsi_fburst_len);
 504         ha->ip_config.iscsi_max_outstnd_r2t =
 505                                 le16_to_cpu(init_fw_cb->iscsi_max_outstnd_r2t);
 506         ha->ip_config.iscsi_max_burst_len =
 507                                 le16_to_cpu(init_fw_cb->iscsi_max_burst_len);
 508         memcpy(ha->ip_config.iscsi_name, init_fw_cb->iscsi_name,
 509                min(sizeof(ha->ip_config.iscsi_name),
 510                    sizeof(init_fw_cb->iscsi_name)));
 511
 512         if (is_ipv6_enabled(ha)) {
 513                 /* Save IPv6 Address */
 514                 ha->ip_config.ipv6_link_local_state =
 515                   qla4xxx_set_ipaddr_state(init_fw_cb->ipv6_lnk_lcl_addr_state);
 516                 ha->ip_config.ipv6_addr0_state =
 517                         qla4xxx_set_ipaddr_state(init_fw_cb->ipv6_addr0_state);
 518                 ha->ip_config.ipv6_addr1_state =
 519                         qla4xxx_set_ipaddr_state(init_fw_cb->ipv6_addr1_state);
 520
 521                 switch (le16_to_cpu(init_fw_cb->ipv6_dflt_rtr_state)) {
 522                 case IPV6_RTRSTATE_UNKNOWN:
 523                         ha->ip_config.ipv6_default_router_state =
 524                                                 ISCSI_ROUTER_STATE_UNKNOWN;
 525                         break;
 526                 case IPV6_RTRSTATE_MANUAL:
 527                         ha->ip_config.ipv6_default_router_state =
 528                                                 ISCSI_ROUTER_STATE_MANUAL;
 529                         break;
 530                 case IPV6_RTRSTATE_ADVERTISED:
 531                         ha->ip_config.ipv6_default_router_state =
 532                                                 ISCSI_ROUTER_STATE_ADVERTISED;
 533                         break;
 534                 case IPV6_RTRSTATE_STALE:
 535                         ha->ip_config.ipv6_default_router_state =
 536                                                 ISCSI_ROUTER_STATE_STALE;
 537                         break;
 538                 default:
 539                         ha->ip_config.ipv6_default_router_state =
 540                                                 ISCSI_ROUTER_STATE_UNKNOWN;
 541                 }
 542
 543                 ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[0] = 0xFE;
 544                 ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[1] = 0x80;
 545
 546                 memcpy(&ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[8],
 547                        init_fw_cb->ipv6_if_id,
 548                        min(sizeof(ha->ip_config.ipv6_link_local_addr)/2,
 549                            sizeof(init_fw_cb->ipv6_if_id)));
 550                 memcpy(&ha->ip_config.ipv6_addr0, init_fw_cb->ipv6_addr0,
 551                        min(sizeof(ha->ip_config.ipv6_addr0),
 552                            sizeof(init_fw_cb->ipv6_addr0)));
 553                 memcpy(&ha->ip_config.ipv6_addr1, init_fw_cb->ipv6_addr1,
 554                        min(sizeof(ha->ip_config.ipv6_addr1),
 555                            sizeof(init_fw_cb->ipv6_addr1)));
 556                 memcpy(&ha->ip_config.ipv6_default_router_addr,
 557                        init_fw_cb->ipv6_dflt_rtr_addr,
 558                        min(sizeof(ha->ip_config.ipv6_default_router_addr),
 559                            sizeof(init_fw_cb->ipv6_dflt_rtr_addr)));
 560                 ha->ip_config.ipv6_vlan_tag =
 561                                 be16_to_cpu(init_fw_cb->ipv6_vlan_tag);
 562                 ha->ip_config.ipv6_port = le16_to_cpu(init_fw_cb->ipv6_port);
 563                 ha->ip_config.ipv6_cache_id = init_fw_cb->ipv6_cache_id;
 564                 ha->ip_config.ipv6_flow_lbl =
 565                                 le16_to_cpu(init_fw_cb->ipv6_flow_lbl);
 566                 ha->ip_config.ipv6_traffic_class =
 567                                 init_fw_cb->ipv6_traffic_class;
 568                 ha->ip_config.ipv6_hop_limit = init_fw_cb->ipv6_hop_limit;
 569                 ha->ip_config.ipv6_nd_reach_time =
 570                                 le32_to_cpu(init_fw_cb->ipv6_nd_reach_time);
 571                 ha->ip_config.ipv6_nd_rexmit_timer =
 572                                 le32_to_cpu(init_fw_cb->ipv6_nd_rexmit_timer);
 573                 ha->ip_config.ipv6_nd_stale_timeout =
 574                                 le32_to_cpu(init_fw_cb->ipv6_nd_stale_timeout);
 575                 ha->ip_config.ipv6_dup_addr_detect_count =
 576                                         init_fw_cb->ipv6_dup_addr_detect_count;
 577                 ha->ip_config.ipv6_gw_advrt_mtu =
 578                                 le32_to_cpu(init_fw_cb->ipv6_gw_advrt_mtu);
 579                 ha->ip_config.ipv6_tcp_wsf = init_fw_cb->ipv6_tcp_wsf;
 580         }
 581 }
 582
 583 uint8_t
 584 qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
 585                           uint32_t *mbox_cmd,
 586                           uint32_t *mbox_sts,
 587                           struct addr_ctrl_blk  *init_fw_cb,
 588                           dma_addr_t init_fw_cb_dma)
 589 {
 590         if (qla4xxx_get_ifcb(ha, mbox_cmd, mbox_sts, init_fw_cb_dma)
 591             != QLA_SUCCESS) {
 592                 DEBUG2(printk(KERN_WARNING
 593                               "scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
 594                               ha->host_no, __func__));
 595                 return QLA_ERROR;
 596         }
 597
 598         DEBUG2(qla4xxx_dump_buffer(init_fw_cb, sizeof(struct addr_ctrl_blk)));
 599
 600         /* Save some info in adapter structure. */
 601         ha->acb_version = init_fw_cb->acb_version;
 602         ha->firmware_options = le16_to_cpu(init_fw_cb->fw_options);
 603         ha->heartbeat_interval = init_fw_cb->hb_interval;
 604         memcpy(ha->name_string, init_fw_cb->iscsi_name,
 605                 min(sizeof(ha->name_string),
 606                 sizeof(init_fw_cb->iscsi_name)));
 607         ha->def_timeout = le16_to_cpu(init_fw_cb->def_timeout);
 608         /*memcpy(ha->alias, init_fw_cb->Alias,
 609                min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
 610
 611         qla4xxx_update_local_ip(ha, init_fw_cb);
 612
 613         return QLA_SUCCESS;
 614 }
 615
 616 /**
 617  * qla4xxx_initialize_fw_cb - initializes firmware control block.
 618  * @ha: Pointer to host adapter structure.
 619  **/
 620 int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 621 {
 622         struct addr_ctrl_blk *init_fw_cb;
 623         dma_addr_t init_fw_cb_dma;
 624         uint32_t mbox_cmd[MBOX_REG_COUNT];
 625         uint32_t mbox_sts[MBOX_REG_COUNT];
 626         int status = QLA_ERROR;
 627
 628         init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
 629                                         sizeof(struct addr_ctrl_blk),
 630                                         &init_fw_cb_dma, GFP_KERNEL);
 631         if (init_fw_cb == NULL) {
 632                 DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
 633                               ha->host_no, __func__));
 634                 goto exit_init_fw_cb_no_free;
 635         }
 636         memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
 637
 638         /* Get Initialize Firmware Control Block. */
 639         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 640         memset(&mbox_sts, 0, sizeof(mbox_sts));
 641
 642         if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 643             QLA_SUCCESS) {
 644                 dma_free_coherent(&ha->pdev->dev,
 645                                   sizeof(struct addr_ctrl_blk),
 646                                   init_fw_cb, init_fw_cb_dma);
 647                 goto exit_init_fw_cb;
 648         }
 649
 650         /* Fill in the request and response queue information. */
 651         init_fw_cb->rqq_consumer_idx = cpu_to_le16(ha->request_out);
 652         init_fw_cb->compq_producer_idx = cpu_to_le16(ha->response_in);
 653         init_fw_cb->rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH);
 654         init_fw_cb->compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH);
 655         init_fw_cb->rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma));
 656         init_fw_cb->rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma));
 657         init_fw_cb->compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma));
 658         init_fw_cb->compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma));
 659         init_fw_cb->shdwreg_addr_lo = cpu_to_le32(LSDW(ha->shadow_regs_dma));
 660         init_fw_cb->shdwreg_addr_hi = cpu_to_le32(MSDW(ha->shadow_regs_dma));
 661
 662         /* Set up required options. */
 663         init_fw_cb->fw_options |=
 664                 __constant_cpu_to_le16(FWOPT_SESSION_MODE |
 665                                        FWOPT_INITIATOR_MODE);
 666
 667         if (is_qla80XX(ha))
 668                 init_fw_cb->fw_options |=
 669                     __constant_cpu_to_le16(FWOPT_ENABLE_CRBDB);
 670
 671         init_fw_cb->fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
 672
 673         init_fw_cb->add_fw_options = 0;
 674         init_fw_cb->add_fw_options |=
 675                         __constant_cpu_to_le16(ADFWOPT_SERIALIZE_TASK_MGMT);
 676         init_fw_cb->add_fw_options |=
 677                         __constant_cpu_to_le16(ADFWOPT_AUTOCONN_DISABLE);
 678
 679         if (qla4xxx_set_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)
 680                 != QLA_SUCCESS) {
 681                 DEBUG2(printk(KERN_WARNING
 682                               "scsi%ld: %s: Failed to set init_fw_ctrl_blk\n",
 683                               ha->host_no, __func__));
 684                 goto exit_init_fw_cb;
 685         }
 686
 687         if (qla4xxx_update_local_ifcb(ha, &mbox_cmd[0], &mbox_sts[0],
 688                 init_fw_cb, init_fw_cb_dma) != QLA_SUCCESS) {
 689                 DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n",
 690                                 ha->host_no, __func__));
 691                 goto exit_init_fw_cb;
 692         }
 693         status = QLA_SUCCESS;
 694
 695 exit_init_fw_cb:
 696         dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk),
 697                                 init_fw_cb, init_fw_cb_dma);
 698 exit_init_fw_cb_no_free:
 699         return status;
 700 }
 701
 702 /**
 703  * qla4xxx_get_dhcp_ip_address - gets HBA ip address via DHCP
 704  * @ha: Pointer to host adapter structure.
 705  **/
 706 int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
 707 {
 708         struct addr_ctrl_blk *init_fw_cb;
 709         dma_addr_t init_fw_cb_dma;
 710         uint32_t mbox_cmd[MBOX_REG_COUNT];
 711         uint32_t mbox_sts[MBOX_REG_COUNT];
 712
 713         init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
 714                                         sizeof(struct addr_ctrl_blk),
 715                                         &init_fw_cb_dma, GFP_KERNEL);
 716         if (init_fw_cb == NULL) {
 717                 printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
 718                        __func__);
 719                 return QLA_ERROR;
 720         }
 721
 722         /* Get Initialize Firmware Control Block. */
 723         memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
 724         if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 725             QLA_SUCCESS) {
 726                 DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
 727                               ha->host_no, __func__));
 728                 dma_free_coherent(&ha->pdev->dev,
 729                                   sizeof(struct addr_ctrl_blk),
 730                                   init_fw_cb, init_fw_cb_dma);
 731                 return QLA_ERROR;
 732         }
 733
 734         /* Save IP Address. */
 735         qla4xxx_update_local_ip(ha, init_fw_cb);
 736         dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk),
 737                                 init_fw_cb, init_fw_cb_dma);
 738
 739         return QLA_SUCCESS;
 740 }
 741
 742 /**
 743  * qla4xxx_get_firmware_state - gets firmware state of HBA
 744  * @ha: Pointer to host adapter structure.
 745  **/
 746 int qla4xxx_get_firmware_state(struct scsi_qla_host * ha)
 747 {
 748         uint32_t mbox_cmd[MBOX_REG_COUNT];
 749         uint32_t mbox_sts[MBOX_REG_COUNT];
 750
 751         /* Get firmware version */
 752         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 753         memset(&mbox_sts, 0, sizeof(mbox_sts));
 754
 755         mbox_cmd[0] = MBOX_CMD_GET_FW_STATE;
 756
 757         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 4, &mbox_cmd[0], &mbox_sts[0]) !=
 758             QLA_SUCCESS) {
 759                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
 760                               "status %04X\n", ha->host_no, __func__,
 761                               mbox_sts[0]));
 762                 return QLA_ERROR;
 763         }
 764         ha->firmware_state = mbox_sts[1];
 765         ha->board_id = mbox_sts[2];
 766         ha->addl_fw_state = mbox_sts[3];
 767         DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n",
 768                       ha->host_no, __func__, ha->firmware_state);)
 769
 770         return QLA_SUCCESS;
 771 }
 772
 773 /**
 774  * qla4xxx_get_firmware_status - retrieves firmware status
 775  * @ha: Pointer to host adapter structure.
 776  **/
 777 int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
 778 {
 779         uint32_t mbox_cmd[MBOX_REG_COUNT];
 780         uint32_t mbox_sts[MBOX_REG_COUNT];
 781
 782         /* Get firmware version */
 783         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 784         memset(&mbox_sts, 0, sizeof(mbox_sts));
 785
 786         mbox_cmd[0] = MBOX_CMD_GET_FW_STATUS;
 787
 788         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], &mbox_sts[0]) !=
 789             QLA_SUCCESS) {
 790                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
 791                               "status %04X\n", ha->host_no, __func__,
 792                               mbox_sts[0]));
 793                 return QLA_ERROR;
 794         }
 795
 796         /* High-water mark of IOCBs */
 797         ha->iocb_hiwat = mbox_sts[2];
 798         DEBUG2(ql4_printk(KERN_INFO, ha,
 799                           "%s: firmware IOCBs available = %d\n", __func__,
 800                           ha->iocb_hiwat));
 801
 802         if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
 803                 ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
 804
 805         /* Ideally, we should not enter this code, as the # of firmware
 806          * IOCBs is hard-coded in the firmware. We set a default
 807          * iocb_hiwat here just in case */
 808         if (ha->iocb_hiwat == 0) {
 809                 ha->iocb_hiwat = REQUEST_QUEUE_DEPTH / 4;
 810                 DEBUG2(ql4_printk(KERN_WARNING, ha,
 811                                   "%s: Setting IOCB's to = %d\n", __func__,
 812                                   ha->iocb_hiwat));
 813         }
 814
 815         return QLA_SUCCESS;
 816 }
 817
 818 /**
 819  * qla4xxx_get_fwddb_entry - retrieves firmware ddb entry
 820  * @ha: Pointer to host adapter structure.
 821  * @fw_ddb_index: Firmware's device database index
 822  * @fw_ddb_entry: Pointer to firmware's device database entry structure
 823  * @num_valid_ddb_entries: Pointer to number of valid ddb entries
 824  * @next_ddb_index: Pointer to next valid device database index
 825  * @fw_ddb_device_state: Pointer to device state
 826  **/
 827 int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
 828                             uint16_t fw_ddb_index,
 829                             struct dev_db_entry *fw_ddb_entry,
 830                             dma_addr_t fw_ddb_entry_dma,
 831                             uint32_t *num_valid_ddb_entries,
 832                             uint32_t *next_ddb_index,
 833                             uint32_t *fw_ddb_device_state,
 834                             uint32_t *conn_err_detail,
 835                             uint16_t *tcp_source_port_num,
 836                             uint16_t *connection_id)
 837 {
 838         int status = QLA_ERROR;
 839         uint16_t options;
 840         uint32_t mbox_cmd[MBOX_REG_COUNT];
 841         uint32_t mbox_sts[MBOX_REG_COUNT];
 842
 843         /* Make sure the device index is valid */
 844         if (fw_ddb_index >= MAX_DDB_ENTRIES) {
 845                 DEBUG2(printk("scsi%ld: %s: ddb [%d] out of range.\n",
 846                               ha->host_no, __func__, fw_ddb_index));
 847                 goto exit_get_fwddb;
 848         }
 849         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 850         memset(&mbox_sts, 0, sizeof(mbox_sts));
 851         if (fw_ddb_entry)
 852                 memset(fw_ddb_entry, 0, sizeof(struct dev_db_entry));
 853
 854         mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY;
 855         mbox_cmd[1] = (uint32_t) fw_ddb_index;
 856         mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
 857         mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
 858         mbox_cmd[4] = sizeof(struct dev_db_entry);
 859
 860         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 7, &mbox_cmd[0], &mbox_sts[0]) ==
 861             QLA_ERROR) {
 862                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed"
 863                               " with status 0x%04X\n", ha->host_no, __func__,
 864                               mbox_sts[0]));
 865                 goto exit_get_fwddb;
 866         }
 867         if (fw_ddb_index != mbox_sts[1]) {
 868                 DEBUG2(printk("scsi%ld: %s: ddb mismatch [%d] != [%d].\n",
 869                               ha->host_no, __func__, fw_ddb_index,
 870                               mbox_sts[1]));
 871                 goto exit_get_fwddb;
 872         }
 873         if (fw_ddb_entry) {
 874                 options = le16_to_cpu(fw_ddb_entry->options);
 875                 if (options & DDB_OPT_IPV6_DEVICE) {
 876                         ql4_printk(KERN_INFO, ha, "%s: DDB[%d] MB0 %04x Tot %d "
 877                                 "Next %d State %04x ConnErr %08x %pI6 "
 878                                 ":%04d \"%s\"\n", __func__, fw_ddb_index,
 879                                 mbox_sts[0], mbox_sts[2], mbox_sts[3],
 880                                 mbox_sts[4], mbox_sts[5],
 881                                 fw_ddb_entry->ip_addr,
 882                                 le16_to_cpu(fw_ddb_entry->port),
 883                                 fw_ddb_entry->iscsi_name);
 884                 } else {
 885                         ql4_printk(KERN_INFO, ha, "%s: DDB[%d] MB0 %04x Tot %d "
 886                                 "Next %d State %04x ConnErr %08x %pI4 "
 887                                 ":%04d \"%s\"\n", __func__, fw_ddb_index,
 888                                 mbox_sts[0], mbox_sts[2], mbox_sts[3],
 889                                 mbox_sts[4], mbox_sts[5],
 890                                 fw_ddb_entry->ip_addr,
 891                                 le16_to_cpu(fw_ddb_entry->port),
 892                                 fw_ddb_entry->iscsi_name);
 893                 }
 894         }
 895         if (num_valid_ddb_entries)
 896                 *num_valid_ddb_entries = mbox_sts[2];
 897         if (next_ddb_index)
 898                 *next_ddb_index = mbox_sts[3];
 899         if (fw_ddb_device_state)
 900                 *fw_ddb_device_state = mbox_sts[4];
 901
 902         /*
 903          * RA: This mailbox has been changed to pass connection error and
 904          * details.  Its true for ISP4010 as per Version E - Not sure when it
 905          * was changed.  Get the time2wait from the fw_dd_entry field :
 906          * default_time2wait which we call it as minTime2Wait DEV_DB_ENTRY
 907          * struct.
 908          */
 909         if (conn_err_detail)
 910                 *conn_err_detail = mbox_sts[5];
 911         if (tcp_source_port_num)
 912                 *tcp_source_port_num = (uint16_t) (mbox_sts[6] >> 16);
 913         if (connection_id)
 914                 *connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
 915         status = QLA_SUCCESS;
 916
 917 exit_get_fwddb:
 918         return status;
 919 }
 920
 921 int qla4xxx_conn_open(struct scsi_qla_host *ha, uint16_t fw_ddb_index)
 922 {
 923         uint32_t mbox_cmd[MBOX_REG_COUNT];
 924         uint32_t mbox_sts[MBOX_REG_COUNT];
 925         int status;
 926
 927         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 928         memset(&mbox_sts, 0, sizeof(mbox_sts));
 929
 930         mbox_cmd[0] = MBOX_CMD_CONN_OPEN;
 931         mbox_cmd[1] = fw_ddb_index;
 932
 933         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
 934                                          &mbox_sts[0]);
 935         DEBUG2(ql4_printk(KERN_INFO, ha,
 936                           "%s: status = %d mbx0 = 0x%x mbx1 = 0x%x\n",
 937                           __func__, status, mbox_sts[0], mbox_sts[1]));
 938         return status;
 939 }
 940
 941 /**
 942  * qla4xxx_set_fwddb_entry - sets a ddb entry.
 943  * @ha: Pointer to host adapter structure.
 944  * @fw_ddb_index: Firmware's device database index
 945  * @fw_ddb_entry_dma: dma address of ddb entry
 946  * @mbx_sts: mailbox 0 to be returned or NULL
 947  *
 948  * This routine initializes or updates the adapter's device database
 949  * entry for the specified device.
 950  **/
 951 int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index,
 952                           dma_addr_t fw_ddb_entry_dma, uint32_t *mbx_sts)
 953 {
 954         uint32_t mbox_cmd[MBOX_REG_COUNT];
 955         uint32_t mbox_sts[MBOX_REG_COUNT];
 956         int status;
 957
 958         /* Do not wait for completion. The firmware will send us an
 959          * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
 960          */
 961         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 962         memset(&mbox_sts, 0, sizeof(mbox_sts));
 963
 964         mbox_cmd[0] = MBOX_CMD_SET_DATABASE_ENTRY;
 965         mbox_cmd[1] = (uint32_t) fw_ddb_index;
 966         mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
 967         mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
 968         mbox_cmd[4] = sizeof(struct dev_db_entry);
 969
 970         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0],
 971                                          &mbox_sts[0]);
 972         if (mbx_sts)
 973                 *mbx_sts = mbox_sts[0];
 974         DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n",
 975             ha->host_no, __func__, status, mbox_sts[0], mbox_sts[4]);)
 976
 977         return status;
 978 }
 979
 980 int qla4xxx_session_logout_ddb(struct scsi_qla_host *ha,
 981                                struct ddb_entry *ddb_entry, int options)
 982 {
 983         int status;
 984         uint32_t mbox_cmd[MBOX_REG_COUNT];
 985         uint32_t mbox_sts[MBOX_REG_COUNT];
 986
 987         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 988         memset(&mbox_sts, 0, sizeof(mbox_sts));
 989
 990         mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT;
 991         mbox_cmd[1] = ddb_entry->fw_ddb_index;
 992         mbox_cmd[3] = options;
 993
 994         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
 995                                          &mbox_sts[0]);
 996         if (status != QLA_SUCCESS) {
 997                 DEBUG2(ql4_printk(KERN_INFO, ha,
 998                                   "%s: MBOX_CMD_CONN_CLOSE_SESS_LOGOUT "
 999                                   "failed sts %04X %04X", __func__,
1000                                   mbox_sts[0], mbox_sts[1]));
1001                 if ((mbox_sts[0] == MBOX_STS_COMMAND_ERROR) &&
1002                     (mbox_sts[1] == DDB_NOT_LOGGED_IN)) {
1003                         set_bit(DDB_CONN_CLOSE_FAILURE, &ddb_entry->flags);
1004                 }
1005         }
1006
1007         return status;
1008 }
1009
1010 /**
1011  * qla4xxx_get_crash_record - retrieves crash record.
1012  * @ha: Pointer to host adapter structure.
1013  *
1014  * This routine retrieves a crash record from the QLA4010 after an 8002h aen.
1015  **/
1016 void qla4xxx_get_crash_record(struct scsi_qla_host * ha)
1017 {
1018         uint32_t mbox_cmd[MBOX_REG_COUNT];
1019         uint32_t mbox_sts[MBOX_REG_COUNT];
1020         struct crash_record *crash_record = NULL;
1021         dma_addr_t crash_record_dma = 0;
1022         uint32_t crash_record_size = 0;
1023
1024         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1025         memset(&mbox_sts, 0, sizeof(mbox_cmd));
1026
1027         /* Get size of crash record. */
1028         mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
1029
1030         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
1031             QLA_SUCCESS) {
1032                 DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
1033                               ha->host_no, __func__));
1034                 goto exit_get_crash_record;
1035         }
1036         crash_record_size = mbox_sts[4];
1037         if (crash_record_size == 0) {
1038                 DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
1039                               ha->host_no, __func__));
1040                 goto exit_get_crash_record;
1041         }
1042
1043         /* Alloc Memory for Crash Record. */
1044         crash_record = dma_alloc_coherent(&ha->pdev->dev, crash_record_size,
1045                                           &crash_record_dma, GFP_KERNEL);
1046         if (crash_record == NULL)
1047                 goto exit_get_crash_record;
1048
1049         /* Get Crash Record. */
1050         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1051         memset(&mbox_sts, 0, sizeof(mbox_cmd));
1052
1053         mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
1054         mbox_cmd[2] = LSDW(crash_record_dma);
1055         mbox_cmd[3] = MSDW(crash_record_dma);
1056         mbox_cmd[4] = crash_record_size;
1057
1058         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
1059             QLA_SUCCESS)
1060                 goto exit_get_crash_record;
1061
1062         /* Dump Crash Record. */
1063
1064 exit_get_crash_record:
1065         if (crash_record)
1066                 dma_free_coherent(&ha->pdev->dev, crash_record_size,
1067                                   crash_record, crash_record_dma);
1068 }
1069
1070 /**
1071  * qla4xxx_get_conn_event_log - retrieves connection event log
1072  * @ha: Pointer to host adapter structure.
1073  **/
1074 void qla4xxx_get_conn_event_log(struct scsi_qla_host * ha)
1075 {
1076         uint32_t mbox_cmd[MBOX_REG_COUNT];
1077         uint32_t mbox_sts[MBOX_REG_COUNT];
1078         struct conn_event_log_entry *event_log = NULL;
1079         dma_addr_t event_log_dma = 0;
1080         uint32_t event_log_size = 0;
1081         uint32_t num_valid_entries;
1082         uint32_t      oldest_entry = 0;
1083         uint32_t        max_event_log_entries;
1084         uint8_t         i;
1085
1086         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1087         memset(&mbox_sts, 0, sizeof(mbox_cmd));
1088
1089         /* Get size of crash record. */
1090         mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
1091
1092         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
1093             QLA_SUCCESS)
1094                 goto exit_get_event_log;
1095
1096         event_log_size = mbox_sts[4];
1097         if (event_log_size == 0)
1098                 goto exit_get_event_log;
1099
1100         /* Alloc Memory for Crash Record. */
1101         event_log = dma_alloc_coherent(&ha->pdev->dev, event_log_size,
1102                                        &event_log_dma, GFP_KERNEL);
1103         if (event_log == NULL)
1104                 goto exit_get_event_log;
1105
1106         /* Get Crash Record. */
1107         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1108         memset(&mbox_sts, 0, sizeof(mbox_cmd));
1109
1110         mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
1111         mbox_cmd[2] = LSDW(event_log_dma);
1112         mbox_cmd[3] = MSDW(event_log_dma);
1113
1114         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
1115             QLA_SUCCESS) {
1116                 DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
1117                               "log!\n", ha->host_no, __func__));
1118                 goto exit_get_event_log;
1119         }
1120
1121         /* Dump Event Log. */
1122         num_valid_entries = mbox_sts[1];
1123
1124         max_event_log_entries = event_log_size /
1125                 sizeof(struct conn_event_log_entry);
1126
1127         if (num_valid_entries > max_event_log_entries)
1128                 oldest_entry = num_valid_entries % max_event_log_entries;
1129
1130         DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
1131                       ha->host_no, num_valid_entries));
1132
1133         if (ql4xextended_error_logging == 3) {
1134                 if (oldest_entry == 0) {
1135                         /* Circular Buffer has not wrapped around */
1136                         for (i=0; i < num_valid_entries; i++) {
1137                                 qla4xxx_dump_buffer((uint8_t *)event_log+
1138                                                     (i*sizeof(*event_log)),
1139                                                     sizeof(*event_log));
1140                         }
1141                 }
1142                 else {
1143                         /* Circular Buffer has wrapped around -
1144                          * display accordingly*/
1145                         for (i=oldest_entry; i < max_event_log_entries; i++) {
1146                                 qla4xxx_dump_buffer((uint8_t *)event_log+
1147                                                     (i*sizeof(*event_log)),
1148                                                     sizeof(*event_log));
1149                         }
1150                         for (i=0; i < oldest_entry; i++) {
1151                                 qla4xxx_dump_buffer((uint8_t *)event_log+
1152                                                     (i*sizeof(*event_log)),
1153                                                     sizeof(*event_log));
1154                         }
1155                 }
1156         }
1157
1158 exit_get_event_log:
1159         if (event_log)
1160                 dma_free_coherent(&ha->pdev->dev, event_log_size, event_log,
1161                                   event_log_dma);
1162 }
1163
1164 /**
1165  * qla4xxx_abort_task - issues Abort Task
1166  * @ha: Pointer to host adapter structure.
1167  * @srb: Pointer to srb entry
1168  *
1169  * This routine performs a LUN RESET on the specified target/lun.
1170  * The caller must ensure that the ddb_entry and lun_entry pointers
1171  * are valid before calling this routine.
1172  **/
1173 int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb)
1174 {
1175         uint32_t mbox_cmd[MBOX_REG_COUNT];
1176         uint32_t mbox_sts[MBOX_REG_COUNT];
1177         struct scsi_cmnd *cmd = srb->cmd;
1178         int status = QLA_SUCCESS;
1179         unsigned long flags = 0;
1180         uint32_t index;
1181
1182         /*
1183          * Send abort task command to ISP, so that the ISP will return
1184          * request with ABORT status
1185          */
1186         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1187         memset(&mbox_sts, 0, sizeof(mbox_sts));
1188
1189         spin_lock_irqsave(&ha->hardware_lock, flags);
1190         index = (unsigned long)(unsigned char *)cmd->host_scribble;
1191         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1192
1193         /* Firmware already posted completion on response queue */
1194         if (index == MAX_SRBS)
1195                 return status;
1196
1197         mbox_cmd[0] = MBOX_CMD_ABORT_TASK;
1198         mbox_cmd[1] = srb->ddb->fw_ddb_index;
1199         mbox_cmd[2] = index;
1200         /* Immediate Command Enable */
1201         mbox_cmd[5] = 0x01;
1202
1203         qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0],
1204             &mbox_sts[0]);
1205         if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE) {
1206                 status = QLA_ERROR;
1207
1208                 DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%llu: abort task FAILED: "
1209                     "mbx0=%04X, mb1=%04X, mb2=%04X, mb3=%04X, mb4=%04X\n",
1210                     ha->host_no, cmd->device->id, cmd->device->lun, mbox_sts[0],
1211                     mbox_sts[1], mbox_sts[2], mbox_sts[3], mbox_sts[4]));
1212         }
1213
1214         return status;
1215 }
1216
1217 /**
1218  * qla4xxx_reset_lun - issues LUN Reset
1219  * @ha: Pointer to host adapter structure.
1220  * @ddb_entry: Pointer to device database entry
1221  * @lun: lun number
1222  *
1223  * This routine performs a LUN RESET on the specified target/lun.
1224  * The caller must ensure that the ddb_entry and lun_entry pointers
1225  * are valid before calling this routine.
1226  **/
1227 int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
1228                       uint64_t lun)
1229 {
1230         uint32_t mbox_cmd[MBOX_REG_COUNT];
1231         uint32_t mbox_sts[MBOX_REG_COUNT];
1232         uint32_t scsi_lun[2];
1233         int status = QLA_SUCCESS;
1234
1235         DEBUG2(printk("scsi%ld:%d:%llu: lun reset issued\n", ha->host_no,
1236                       ddb_entry->fw_ddb_index, lun));
1237
1238         /*
1239          * Send lun reset command to ISP, so that the ISP will return all
1240          * outstanding requests with RESET status
1241          */
1242         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1243         memset(&mbox_sts, 0, sizeof(mbox_sts));
1244         int_to_scsilun(lun, (struct scsi_lun *) scsi_lun);
1245
1246         mbox_cmd[0] = MBOX_CMD_LUN_RESET;
1247         mbox_cmd[1] = ddb_entry->fw_ddb_index;
1248         /* FW expects LUN bytes 0-3 in Incoming Mailbox 2
1249          * (LUN byte 0 is LSByte, byte 3 is MSByte) */
1250         mbox_cmd[2] = cpu_to_le32(scsi_lun[0]);
1251         /* FW expects LUN bytes 4-7 in Incoming Mailbox 3
1252          * (LUN byte 4 is LSByte, byte 7 is MSByte) */
1253         mbox_cmd[3] = cpu_to_le32(scsi_lun[1]);
1254         mbox_cmd[5] = 0x01;     /* Immediate Command Enable */
1255
1256         qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]);
1257         if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
1258             mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
1259                 status = QLA_ERROR;
1260
1261         return status;
1262 }
1263
1264 /**
1265  * qla4xxx_reset_target - issues target Reset
1266  * @ha: Pointer to host adapter structure.
1267  * @db_entry: Pointer to device database entry
1268  * @un_entry: Pointer to lun entry structure
1269  *
1270  * This routine performs a TARGET RESET on the specified target.
1271  * The caller must ensure that the ddb_entry pointers
1272  * are valid before calling this routine.
1273  **/
1274 int qla4xxx_reset_target(struct scsi_qla_host *ha,
1275                          struct ddb_entry *ddb_entry)
1276 {
1277         uint32_t mbox_cmd[MBOX_REG_COUNT];
1278         uint32_t mbox_sts[MBOX_REG_COUNT];
1279         int status = QLA_SUCCESS;
1280
1281         DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no,
1282                       ddb_entry->fw_ddb_index));
1283
1284         /*
1285          * Send target reset command to ISP, so that the ISP will return all
1286          * outstanding requests with RESET status
1287          */
1288         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1289         memset(&mbox_sts, 0, sizeof(mbox_sts));
1290
1291         mbox_cmd[0] = MBOX_CMD_TARGET_WARM_RESET;
1292         mbox_cmd[1] = ddb_entry->fw_ddb_index;
1293         mbox_cmd[5] = 0x01;     /* Immediate Command Enable */
1294
1295         qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
1296                                 &mbox_sts[0]);
1297         if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
1298             mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
1299                 status = QLA_ERROR;
1300
1301         return status;
1302 }
1303
1304 int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr,
1305                       uint32_t offset, uint32_t len)
1306 {
1307         uint32_t mbox_cmd[MBOX_REG_COUNT];
1308         uint32_t mbox_sts[MBOX_REG_COUNT];
1309
1310         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1311         memset(&mbox_sts, 0, sizeof(mbox_sts));
1312
1313         mbox_cmd[0] = MBOX_CMD_READ_FLASH;
1314         mbox_cmd[1] = LSDW(dma_addr);
1315         mbox_cmd[2] = MSDW(dma_addr);
1316         mbox_cmd[3] = offset;
1317         mbox_cmd[4] = len;
1318
1319         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0], &mbox_sts[0]) !=
1320             QLA_SUCCESS) {
1321                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
1322                     "status %04X %04X, offset %08x, len %08x\n", ha->host_no,
1323                     __func__, mbox_sts[0], mbox_sts[1], offset, len));
1324                 return QLA_ERROR;
1325         }
1326         return QLA_SUCCESS;
1327 }
1328
1329 /**
1330  * qla4xxx_about_firmware - gets FW, iscsi draft and boot loader version
1331  * @ha: Pointer to host adapter structure.
1332  *
1333  * Retrieves the FW version, iSCSI draft version & bootloader version of HBA.
1334  * Mailboxes 2 & 3 may hold an address for data. Make sure that we write 0 to
1335  * those mailboxes, if unused.
1336  **/
1337 int qla4xxx_about_firmware(struct scsi_qla_host *ha)
1338 {
1339         struct about_fw_info *about_fw = NULL;
1340         dma_addr_t about_fw_dma;
1341         uint32_t mbox_cmd[MBOX_REG_COUNT];
1342         uint32_t mbox_sts[MBOX_REG_COUNT];
1343         int status = QLA_ERROR;
1344
1345         about_fw = dma_alloc_coherent(&ha->pdev->dev,
1346                                       sizeof(struct about_fw_info),
1347                                       &about_fw_dma, GFP_KERNEL);
1348         if (!about_fw) {
1349                 DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Unable to alloc memory "
1350                                   "for about_fw\n", __func__));
1351                 return status;
1352         }
1353
1354         memset(about_fw, 0, sizeof(struct about_fw_info));
1355         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1356         memset(&mbox_sts, 0, sizeof(mbox_sts));
1357
1358         mbox_cmd[0] = MBOX_CMD_ABOUT_FW;
1359         mbox_cmd[2] = LSDW(about_fw_dma);
1360         mbox_cmd[3] = MSDW(about_fw_dma);
1361         mbox_cmd[4] = sizeof(struct about_fw_info);
1362
1363         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
1364                                          &mbox_cmd[0], &mbox_sts[0]);
1365         if (status != QLA_SUCCESS) {
1366                 DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_ABOUT_FW "
1367                                   "failed w/ status %04X\n", __func__,
1368                                   mbox_sts[0]));
1369                 goto exit_about_fw;
1370         }
1371
1372         /* Save version information. */
1373         ha->fw_info.fw_major = le16_to_cpu(about_fw->fw_major);
1374         ha->fw_info.fw_minor = le16_to_cpu(about_fw->fw_minor);
1375         ha->fw_info.fw_patch = le16_to_cpu(about_fw->fw_patch);
1376         ha->fw_info.fw_build = le16_to_cpu(about_fw->fw_build);
1377         memcpy(ha->fw_info.fw_build_date, about_fw->fw_build_date,
1378                sizeof(about_fw->fw_build_date));
1379         memcpy(ha->fw_info.fw_build_time, about_fw->fw_build_time,
1380                sizeof(about_fw->fw_build_time));
1381         strcpy((char *)ha->fw_info.fw_build_user,
1382                skip_spaces((char *)about_fw->fw_build_user));
1383         ha->fw_info.fw_load_source = le16_to_cpu(about_fw->fw_load_source);
1384         ha->fw_info.iscsi_major = le16_to_cpu(about_fw->iscsi_major);
1385         ha->fw_info.iscsi_minor = le16_to_cpu(about_fw->iscsi_minor);
1386         ha->fw_info.bootload_major = le16_to_cpu(about_fw->bootload_major);
1387         ha->fw_info.bootload_minor = le16_to_cpu(about_fw->bootload_minor);
1388         ha->fw_info.bootload_patch = le16_to_cpu(about_fw->bootload_patch);
1389         ha->fw_info.bootload_build = le16_to_cpu(about_fw->bootload_build);
1390         strcpy((char *)ha->fw_info.extended_timestamp,
1391                skip_spaces((char *)about_fw->extended_timestamp));
1392
1393         ha->fw_uptime_secs = le32_to_cpu(mbox_sts[5]);
1394         ha->fw_uptime_msecs = le32_to_cpu(mbox_sts[6]);
1395         status = QLA_SUCCESS;
1396
1397 exit_about_fw:
1398         dma_free_coherent(&ha->pdev->dev, sizeof(struct about_fw_info),
1399                           about_fw, about_fw_dma);
1400         return status;
1401 }
1402
1403 int qla4xxx_get_default_ddb(struct scsi_qla_host *ha, uint32_t options,
1404                             dma_addr_t dma_addr)
1405 {
1406         uint32_t mbox_cmd[MBOX_REG_COUNT];
1407         uint32_t mbox_sts[MBOX_REG_COUNT];
1408
1409         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1410         memset(&mbox_sts, 0, sizeof(mbox_sts));
1411
1412         mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS;
1413         mbox_cmd[1] = options;
1414         mbox_cmd[2] = LSDW(dma_addr);
1415         mbox_cmd[3] = MSDW(dma_addr);
1416
1417         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
1418             QLA_SUCCESS) {
1419                 DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
1420                      ha->host_no, __func__, mbox_sts[0]));
1421                 return QLA_ERROR;
1422         }
1423         return QLA_SUCCESS;
1424 }
1425
1426 int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t ddb_index,
1427                           uint32_t *mbx_sts)
1428 {
1429         int status;
1430         uint32_t mbox_cmd[MBOX_REG_COUNT];
1431         uint32_t mbox_sts[MBOX_REG_COUNT];
1432
1433         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1434         memset(&mbox_sts, 0, sizeof(mbox_sts));
1435
1436         mbox_cmd[0] = MBOX_CMD_REQUEST_DATABASE_ENTRY;
1437         mbox_cmd[1] = ddb_index;
1438
1439         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
1440                                          &mbox_sts[0]);
1441         if (status != QLA_SUCCESS) {
1442                 DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
1443                                    __func__, mbox_sts[0]));
1444         }
1445
1446         *mbx_sts = mbox_sts[0];
1447         return status;
1448 }
1449
1450 int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t ddb_index)
1451 {
1452         int status;
1453         uint32_t mbox_cmd[MBOX_REG_COUNT];
1454         uint32_t mbox_sts[MBOX_REG_COUNT];
1455
1456         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1457         memset(&mbox_sts, 0, sizeof(mbox_sts));
1458
1459         mbox_cmd[0] = MBOX_CMD_CLEAR_DATABASE_ENTRY;
1460         mbox_cmd[1] = ddb_index;
1461
1462         status = qla4xxx_mailbox_command(ha, 2, 1, &mbox_cmd[0],
1463                                          &mbox_sts[0]);
1464         if (status != QLA_SUCCESS) {
1465                 DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
1466                                    __func__, mbox_sts[0]));
1467         }
1468
1469         return status;
1470 }
1471
1472 int qla4xxx_set_flash(struct scsi_qla_host *ha, dma_addr_t dma_addr,
1473                       uint32_t offset, uint32_t length, uint32_t options)
1474 {
1475         uint32_t mbox_cmd[MBOX_REG_COUNT];
1476         uint32_t mbox_sts[MBOX_REG_COUNT];
1477         int status = QLA_SUCCESS;
1478
1479         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1480         memset(&mbox_sts, 0, sizeof(mbox_sts));
1481
1482         mbox_cmd[0] = MBOX_CMD_WRITE_FLASH;
1483         mbox_cmd[1] = LSDW(dma_addr);
1484         mbox_cmd[2] = MSDW(dma_addr);
1485         mbox_cmd[3] = offset;
1486         mbox_cmd[4] = length;
1487         mbox_cmd[5] = options;
1488
1489         status = qla4xxx_mailbox_command(ha, 6, 2, &mbox_cmd[0], &mbox_sts[0]);
1490         if (status != QLA_SUCCESS) {
1491                 DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_WRITE_FLASH "
1492                                   "failed w/ status %04X, mbx1 %04X\n",
1493                                   __func__, mbox_sts[0], mbox_sts[1]));
1494         }
1495         return status;
1496 }
1497
1498 int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha,
1499                             struct dev_db_entry *fw_ddb_entry,
1500                             dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index)
1501 {
1502         uint32_t dev_db_start_offset = FLASH_OFFSET_DB_INFO;
1503         uint32_t dev_db_end_offset;
1504         int status = QLA_ERROR;
1505
1506         memset(fw_ddb_entry, 0, sizeof(*fw_ddb_entry));
1507
1508         dev_db_start_offset += (ddb_index * sizeof(*fw_ddb_entry));
1509         dev_db_end_offset = FLASH_OFFSET_DB_END;
1510
1511         if (dev_db_start_offset > dev_db_end_offset) {
1512                 DEBUG2(ql4_printk(KERN_ERR, ha,
1513                                   "%s:Invalid DDB index %d", __func__,
1514                                   ddb_index));
1515                 goto exit_bootdb_failed;
1516         }
1517
1518         if (qla4xxx_get_flash(ha, fw_ddb_entry_dma, dev_db_start_offset,
1519                               sizeof(*fw_ddb_entry)) != QLA_SUCCESS) {
1520                 ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash"
1521                            "failed\n", ha->host_no, __func__);
1522                 goto exit_bootdb_failed;
1523         }
1524
1525         if (fw_ddb_entry->cookie == DDB_VALID_COOKIE)
1526                 status = QLA_SUCCESS;
1527
1528 exit_bootdb_failed:
1529         return status;
1530 }
1531
1532 int qla4xxx_flashdb_by_index(struct scsi_qla_host *ha,
1533                              struct dev_db_entry *fw_ddb_entry,
1534                              dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index)
1535 {
1536         uint32_t dev_db_start_offset;
1537         uint32_t dev_db_end_offset;
1538         int status = QLA_ERROR;
1539
1540         memset(fw_ddb_entry, 0, sizeof(*fw_ddb_entry));
1541
1542         if (is_qla40XX(ha)) {
1543                 dev_db_start_offset = FLASH_OFFSET_DB_INFO;
1544                 dev_db_end_offset = FLASH_OFFSET_DB_END;
1545         } else {
1546                 dev_db_start_offset = FLASH_RAW_ACCESS_ADDR +
1547                                       (ha->hw.flt_region_ddb << 2);
1548                 /* flt_ddb_size is DDB table size for both ports
1549                  * so divide it by 2 to calculate the offset for second port
1550                  */
1551                 if (ha->port_num == 1)
1552                         dev_db_start_offset += (ha->hw.flt_ddb_size / 2);
1553
1554                 dev_db_end_offset = dev_db_start_offset +
1555                                     (ha->hw.flt_ddb_size / 2);
1556         }
1557
1558         dev_db_start_offset += (ddb_index * sizeof(*fw_ddb_entry));
1559
1560         if (dev_db_start_offset > dev_db_end_offset) {
1561                 DEBUG2(ql4_printk(KERN_ERR, ha,
1562                                   "%s:Invalid DDB index %d", __func__,
1563                                   ddb_index));
1564                 goto exit_fdb_failed;
1565         }
1566
1567         if (qla4xxx_get_flash(ha, fw_ddb_entry_dma, dev_db_start_offset,
1568                               sizeof(*fw_ddb_entry)) != QLA_SUCCESS) {
1569                 ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash failed\n",
1570                            ha->host_no, __func__);
1571                 goto exit_fdb_failed;
1572         }
1573
1574         if (fw_ddb_entry->cookie == DDB_VALID_COOKIE)
1575                 status = QLA_SUCCESS;
1576
1577 exit_fdb_failed:
1578         return status;
1579 }
1580
1581 int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password,
1582                      uint16_t idx)
1583 {
1584         int ret = 0;
1585         int rval = QLA_ERROR;
1586         uint32_t offset = 0, chap_size;
1587         struct ql4_chap_table *chap_table;
1588         dma_addr_t chap_dma;
1589
1590         chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
1591         if (chap_table == NULL)
1592                 return -ENOMEM;
1593
1594         chap_size = sizeof(struct ql4_chap_table);
1595         memset(chap_table, 0, chap_size);
1596
1597         if (is_qla40XX(ha))
1598                 offset = FLASH_CHAP_OFFSET | (idx * chap_size);
1599         else {
1600                 offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2);
1601                 /* flt_chap_size is CHAP table size for both ports
1602                  * so divide it by 2 to calculate the offset for second port
1603                  */
1604                 if (ha->port_num == 1)
1605                         offset += (ha->hw.flt_chap_size / 2);
1606                 offset += (idx * chap_size);
1607         }
1608
1609         rval = qla4xxx_get_flash(ha, chap_dma, offset, chap_size);
1610         if (rval != QLA_SUCCESS) {
1611                 ret = -EINVAL;
1612                 goto exit_get_chap;
1613         }
1614
1615         DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n",
1616                 __le16_to_cpu(chap_table->cookie)));
1617
1618         if (__le16_to_cpu(chap_table->cookie) != CHAP_VALID_COOKIE) {
1619                 ql4_printk(KERN_ERR, ha, "No valid chap entry found\n");
1620                 goto exit_get_chap;
1621         }
1622
1623         strlcpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN);
1624         strlcpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN);
1625         chap_table->cookie = __constant_cpu_to_le16(CHAP_VALID_COOKIE);
1626
1627 exit_get_chap:
1628         dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma);
1629         return ret;
1630 }
1631
1632 /**
1633  * qla4xxx_set_chap - Make a chap entry at the given index
1634  * @ha: pointer to adapter structure
1635  * @username: CHAP username to set
1636  * @password: CHAP password to set
1637  * @idx: CHAP index at which to make the entry
1638  * @bidi: type of chap entry (chap_in or chap_out)
1639  *
1640  * Create chap entry at the given index with the information provided.
1641  *
1642  * Note: Caller should acquire the chap lock before getting here.
1643  **/
1644 int qla4xxx_set_chap(struct scsi_qla_host *ha, char *username, char *password,
1645                      uint16_t idx, int bidi)
1646 {
1647         int ret = 0;
1648         int rval = QLA_ERROR;
1649         uint32_t offset = 0;
1650         struct ql4_chap_table *chap_table;
1651         uint32_t chap_size = 0;
1652         dma_addr_t chap_dma;
1653
1654         chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
1655         if (chap_table == NULL) {
1656                 ret =  -ENOMEM;
1657                 goto exit_set_chap;
1658         }
1659
1660         memset(chap_table, 0, sizeof(struct ql4_chap_table));
1661         if (bidi)
1662                 chap_table->flags |= BIT_6; /* peer */
1663         else
1664                 chap_table->flags |= BIT_7; /* local */
1665         chap_table->secret_len = strlen(password);
1666         strncpy(chap_table->secret, password, MAX_CHAP_SECRET_LEN - 1);
1667         strncpy(chap_table->name, username, MAX_CHAP_NAME_LEN - 1);
1668         chap_table->cookie = __constant_cpu_to_le16(CHAP_VALID_COOKIE);
1669
1670         if (is_qla40XX(ha)) {
1671                 chap_size = MAX_CHAP_ENTRIES_40XX * sizeof(*chap_table);
1672                 offset = FLASH_CHAP_OFFSET;
1673         } else { /* Single region contains CHAP info for both ports which is
1674                   * divided into half for each port.
1675                   */
1676                 chap_size = ha->hw.flt_chap_size / 2;
1677                 offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2);
1678                 if (ha->port_num == 1)
1679                         offset += chap_size;
1680         }
1681
1682         offset += (idx * sizeof(struct ql4_chap_table));
1683         rval = qla4xxx_set_flash(ha, chap_dma, offset,
1684                                 sizeof(struct ql4_chap_table),
1685                                 FLASH_OPT_RMW_COMMIT);
1686
1687         if (rval == QLA_SUCCESS && ha->chap_list) {
1688                 /* Update ha chap_list cache */
1689                 memcpy((struct ql4_chap_table *)ha->chap_list + idx,
1690                        chap_table, sizeof(struct ql4_chap_table));
1691         }
1692         dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma);
1693         if (rval != QLA_SUCCESS)
1694                 ret =  -EINVAL;
1695
1696 exit_set_chap:
1697         return ret;
1698 }
1699
1700
1701 int qla4xxx_get_uni_chap_at_index(struct scsi_qla_host *ha, char *username,
1702                                   char *password, uint16_t chap_index)
1703 {
1704         int rval = QLA_ERROR;
1705         struct ql4_chap_table *chap_table = NULL;
1706         int max_chap_entries;
1707
1708         if (!ha->chap_list) {
1709                 ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n");
1710                 rval = QLA_ERROR;
1711                 goto exit_uni_chap;
1712         }
1713
1714         if (!username || !password) {
1715                 ql4_printk(KERN_ERR, ha, "No memory for username & secret\n");
1716                 rval = QLA_ERROR;
1717                 goto exit_uni_chap;
1718         }
1719
1720         if (is_qla80XX(ha))
1721                 max_chap_entries = (ha->hw.flt_chap_size / 2) /
1722                                    sizeof(struct ql4_chap_table);
1723         else
1724                 max_chap_entries = MAX_CHAP_ENTRIES_40XX;
1725
1726         if (chap_index > max_chap_entries) {
1727                 ql4_printk(KERN_ERR, ha, "Invalid Chap index\n");
1728                 rval = QLA_ERROR;
1729                 goto exit_uni_chap;
1730         }
1731
1732         mutex_lock(&ha->chap_sem);
1733         chap_table = (struct ql4_chap_table *)ha->chap_list + chap_index;
1734         if (chap_table->cookie != __constant_cpu_to_le16(CHAP_VALID_COOKIE)) {
1735                 rval = QLA_ERROR;
1736                 goto exit_unlock_uni_chap;
1737         }
1738
1739         if (!(chap_table->flags & BIT_7)) {
1740                 ql4_printk(KERN_ERR, ha, "Unidirectional entry not set\n");
1741                 rval = QLA_ERROR;
1742                 goto exit_unlock_uni_chap;
1743         }
1744
1745         strlcpy(password, chap_table->secret, MAX_CHAP_SECRET_LEN);
1746         strlcpy(username, chap_table->name, MAX_CHAP_NAME_LEN);
1747
1748         rval = QLA_SUCCESS;
1749
1750 exit_unlock_uni_chap:
1751         mutex_unlock(&ha->chap_sem);
1752 exit_uni_chap:
1753         return rval;
1754 }
1755
1756 /**
1757  * qla4xxx_get_chap_index - Get chap index given username and secret
1758  * @ha: pointer to adapter structure
1759  * @username: CHAP username to be searched
1760  * @password: CHAP password to be searched
1761  * @bidi: Is this a BIDI CHAP
1762  * @chap_index: CHAP index to be returned
1763  *
1764  * Match the username and password in the chap_list, return the index if a
1765  * match is found. If a match is not found then add the entry in FLASH and
1766  * return the index at which entry is written in the FLASH.
1767  **/
1768 int qla4xxx_get_chap_index(struct scsi_qla_host *ha, char *username,
1769                            char *password, int bidi, uint16_t *chap_index)
1770 {
1771         int i, rval;
1772         int free_index = -1;
1773         int found_index = 0;
1774         int max_chap_entries = 0;
1775         struct ql4_chap_table *chap_table;
1776
1777         if (is_qla80XX(ha))
1778                 max_chap_entries = (ha->hw.flt_chap_size / 2) /
1779                                                 sizeof(struct ql4_chap_table);
1780         else
1781                 max_chap_entries = MAX_CHAP_ENTRIES_40XX;
1782
1783         if (!ha->chap_list) {
1784                 ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n");
1785                 return QLA_ERROR;
1786         }
1787
1788         if (!username || !password) {
1789                 ql4_printk(KERN_ERR, ha, "Do not have username and psw\n");
1790                 return QLA_ERROR;
1791         }
1792
1793         mutex_lock(&ha->chap_sem);
1794         for (i = 0; i < max_chap_entries; i++) {
1795                 chap_table = (struct ql4_chap_table *)ha->chap_list + i;
1796                 if (chap_table->cookie !=
1797                     __constant_cpu_to_le16(CHAP_VALID_COOKIE)) {
1798                         if (i > MAX_RESRV_CHAP_IDX && free_index == -1)
1799                                 free_index = i;
1800                         continue;
1801                 }
1802                 if (bidi) {
1803                         if (chap_table->flags & BIT_7)
1804                                 continue;
1805                 } else {
1806                         if (chap_table->flags & BIT_6)
1807                                 continue;
1808                 }
1809                 if (!strncmp(chap_table->secret, password,
1810                              MAX_CHAP_SECRET_LEN) &&
1811                     !strncmp(chap_table->name, username,
1812                              MAX_CHAP_NAME_LEN)) {
1813                         *chap_index = i;
1814                         found_index = 1;
1815                         break;
1816                 }
1817         }
1818
1819         /* If chap entry is not present and a free index is available then
1820          * write the entry in flash
1821          */
1822         if (!found_index && free_index != -1) {
1823                 rval = qla4xxx_set_chap(ha, username, password,
1824                                         free_index, bidi);
1825                 if (!rval) {
1826                         *chap_index = free_index;
1827                         found_index = 1;
1828                 }
1829         }
1830
1831         mutex_unlock(&ha->chap_sem);
1832
1833         if (found_index)
1834                 return QLA_SUCCESS;
1835         return QLA_ERROR;
1836 }
1837
1838 int qla4xxx_conn_close_sess_logout(struct scsi_qla_host *ha,
1839                                    uint16_t fw_ddb_index,
1840                                    uint16_t connection_id,
1841                                    uint16_t option)
1842 {
1843         uint32_t mbox_cmd[MBOX_REG_COUNT];
1844         uint32_t mbox_sts[MBOX_REG_COUNT];
1845         int status = QLA_SUCCESS;
1846
1847         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1848         memset(&mbox_sts, 0, sizeof(mbox_sts));
1849
1850         mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT;
1851         mbox_cmd[1] = fw_ddb_index;
1852         mbox_cmd[2] = connection_id;
1853         mbox_cmd[3] = option;
1854
1855         status = qla4xxx_mailbox_command(ha, 4, 2, &mbox_cmd[0], &mbox_sts[0]);
1856         if (status != QLA_SUCCESS) {
1857                 DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_CONN_CLOSE "
1858                                   "option %04x failed w/ status %04X %04X\n",
1859                                   __func__, option, mbox_sts[0], mbox_sts[1]));
1860         }
1861         return status;
1862 }
1863
1864 /**
1865  * qla4_84xx_extend_idc_tmo - Extend IDC Timeout.
1866  * @ha: Pointer to host adapter structure.
1867  * @ext_tmo: idc timeout value
1868  *
1869  * Requests firmware to extend the idc timeout value.
1870  **/
1871 static int qla4_84xx_extend_idc_tmo(struct scsi_qla_host *ha, uint32_t ext_tmo)
1872 {
1873         uint32_t mbox_cmd[MBOX_REG_COUNT];
1874         uint32_t mbox_sts[MBOX_REG_COUNT];
1875         int status;
1876
1877         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1878         memset(&mbox_sts, 0, sizeof(mbox_sts));
1879         ext_tmo &= 0xf;
1880
1881         mbox_cmd[0] = MBOX_CMD_IDC_TIME_EXTEND;
1882         mbox_cmd[1] = ((ha->idc_info.request_desc & 0xfffff0ff) |
1883                        (ext_tmo << 8));         /* new timeout */
1884         mbox_cmd[2] = ha->idc_info.info1;
1885         mbox_cmd[3] = ha->idc_info.info2;
1886         mbox_cmd[4] = ha->idc_info.info3;
1887
1888         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
1889                                          mbox_cmd, mbox_sts);
1890         if (status != QLA_SUCCESS) {
1891                 DEBUG2(ql4_printk(KERN_INFO, ha,
1892                                   "scsi%ld: %s: failed status %04X\n",
1893                                   ha->host_no, __func__, mbox_sts[0]));
1894                 return QLA_ERROR;
1895         } else {
1896                 ql4_printk(KERN_INFO, ha, "%s: IDC timeout extended by %d secs\n",
1897                            __func__, ext_tmo);
1898         }
1899
1900         return QLA_SUCCESS;
1901 }
1902
1903 int qla4xxx_disable_acb(struct scsi_qla_host *ha)
1904 {
1905         uint32_t mbox_cmd[MBOX_REG_COUNT];
1906         uint32_t mbox_sts[MBOX_REG_COUNT];
1907         int status = QLA_SUCCESS;
1908
1909         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1910         memset(&mbox_sts, 0, sizeof(mbox_sts));
1911
1912         mbox_cmd[0] = MBOX_CMD_DISABLE_ACB;
1913
1914         status = qla4xxx_mailbox_command(ha, 8, 5, &mbox_cmd[0], &mbox_sts[0]);
1915         if (status != QLA_SUCCESS) {
1916                 DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_DISABLE_ACB "
1917                                   "failed w/ status %04X %04X %04X", __func__,
1918                                   mbox_sts[0], mbox_sts[1], mbox_sts[2]));
1919         } else {
1920                 if (is_qla8042(ha) &&
1921                     test_bit(DPC_POST_IDC_ACK, &ha->dpc_flags) &&
1922                     (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE)) {
1923                         /*
1924                          * Disable ACB mailbox command takes time to complete
1925                          * based on the total number of targets connected.
1926                          * For 512 targets, it took approximately 5 secs to
1927                          * complete. Setting the timeout value to 8, with the 3
1928                          * secs buffer.
1929                          */
1930                         qla4_84xx_extend_idc_tmo(ha, IDC_EXTEND_TOV);
1931                         if (!wait_for_completion_timeout(&ha->disable_acb_comp,
1932                                                          IDC_EXTEND_TOV * HZ)) {
1933                                 ql4_printk(KERN_WARNING, ha, "%s: Disable ACB Completion not received\n",
1934                                            __func__);
1935                         }
1936                 }
1937         }
1938         return status;
1939 }
1940
1941 int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma,
1942                     uint32_t acb_type, uint32_t len)
1943 {
1944         uint32_t mbox_cmd[MBOX_REG_COUNT];
1945         uint32_t mbox_sts[MBOX_REG_COUNT];
1946         int status = QLA_SUCCESS;
1947
1948         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1949         memset(&mbox_sts, 0, sizeof(mbox_sts));
1950
1951         mbox_cmd[0] = MBOX_CMD_GET_ACB;
1952         mbox_cmd[1] = acb_type;
1953         mbox_cmd[2] = LSDW(acb_dma);
1954         mbox_cmd[3] = MSDW(acb_dma);
1955         mbox_cmd[4] = len;
1956
1957         status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]);
1958         if (status != QLA_SUCCESS) {
1959                 DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_GET_ACB "
1960                                   "failed w/ status %04X\n", __func__,
1961                                   mbox_sts[0]));
1962         }
1963         return status;
1964 }
1965
1966 int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
1967                     uint32_t *mbox_sts, dma_addr_t acb_dma)
1968 {
1969         int status = QLA_SUCCESS;
1970
1971         memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
1972         memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
1973         mbox_cmd[0] = MBOX_CMD_SET_ACB;
1974         mbox_cmd[1] = 0; /* Primary ACB */
1975         mbox_cmd[2] = LSDW(acb_dma);
1976         mbox_cmd[3] = MSDW(acb_dma);
1977         mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
1978
1979         status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]);
1980         if (status != QLA_SUCCESS) {
1981                 DEBUG2(ql4_printk(KERN_WARNING, ha,  "%s: MBOX_CMD_SET_ACB "
1982                                   "failed w/ status %04X\n", __func__,
1983                                   mbox_sts[0]));
1984         }
1985         return status;
1986 }
1987
1988 int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha,
1989                                struct ddb_entry *ddb_entry,
1990                                struct iscsi_cls_conn *cls_conn,
1991                                uint32_t *mbx_sts)
1992 {
1993         struct dev_db_entry *fw_ddb_entry;
1994         struct iscsi_conn *conn;
1995         struct iscsi_session *sess;
1996         struct qla_conn *qla_conn;
1997         struct sockaddr *dst_addr;
1998         dma_addr_t fw_ddb_entry_dma;
1999         int status = QLA_SUCCESS;
2000         int rval = 0;
2001         struct sockaddr_in *addr;
2002         struct sockaddr_in6 *addr6;
2003         char *ip;
2004         uint16_t iscsi_opts = 0;
2005         uint32_t options = 0;
2006         uint16_t idx, *ptid;
2007
2008         fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
2009                                           &fw_ddb_entry_dma, GFP_KERNEL);
2010         if (!fw_ddb_entry) {
2011                 DEBUG2(ql4_printk(KERN_ERR, ha,
2012                                   "%s: Unable to allocate dma buffer.\n",
2013                                   __func__));
2014                 rval = -ENOMEM;
2015                 goto exit_set_param_no_free;
2016         }
2017
2018         conn = cls_conn->dd_data;
2019         qla_conn = conn->dd_data;
2020         sess = conn->session;
2021         dst_addr = (struct sockaddr *)&qla_conn->qla_ep->dst_addr;
2022
2023         if (dst_addr->sa_family == AF_INET6)
2024                 options |= IPV6_DEFAULT_DDB_ENTRY;
2025
2026         status = qla4xxx_get_default_ddb(ha, options, fw_ddb_entry_dma);
2027         if (status == QLA_ERROR) {
2028                 rval = -EINVAL;
2029                 goto exit_set_param;
2030         }
2031
2032         ptid = (uint16_t *)&fw_ddb_entry->isid[1];
2033         *ptid = cpu_to_le16((uint16_t)ddb_entry->sess->target_id);
2034
2035         DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%02x%02x%02x%02x%02x%02x]\n",
2036                           fw_ddb_entry->isid[5], fw_ddb_entry->isid[4],
2037                           fw_ddb_entry->isid[3], fw_ddb_entry->isid[2],
2038                           fw_ddb_entry->isid[1], fw_ddb_entry->isid[0]));
2039
2040         iscsi_opts = le16_to_cpu(fw_ddb_entry->iscsi_options);
2041         memset(fw_ddb_entry->iscsi_alias, 0, sizeof(fw_ddb_entry->iscsi_alias));
2042
2043         memset(fw_ddb_entry->iscsi_name, 0, sizeof(fw_ddb_entry->iscsi_name));
2044
2045         if (sess->targetname != NULL) {
2046                 memcpy(fw_ddb_entry->iscsi_name, sess->targetname,
2047                        min(strlen(sess->targetname),
2048                        sizeof(fw_ddb_entry->iscsi_name)));
2049         }
2050
2051         memset(fw_ddb_entry->ip_addr, 0, sizeof(fw_ddb_entry->ip_addr));
2052         memset(fw_ddb_entry->tgt_addr, 0, sizeof(fw_ddb_entry->tgt_addr));
2053
2054         fw_ddb_entry->options =  DDB_OPT_TARGET | DDB_OPT_AUTO_SENDTGTS_DISABLE;
2055
2056         if (dst_addr->sa_family == AF_INET) {
2057                 addr = (struct sockaddr_in *)dst_addr;
2058                 ip = (char *)&addr->sin_addr;
2059                 memcpy(fw_ddb_entry->ip_addr, ip, IP_ADDR_LEN);
2060                 fw_ddb_entry->port = cpu_to_le16(ntohs(addr->sin_port));
2061                 DEBUG2(ql4_printk(KERN_INFO, ha,
2062                                   "%s: Destination Address [%pI4]: index [%d]\n",
2063                                    __func__, fw_ddb_entry->ip_addr,
2064                                   ddb_entry->fw_ddb_index));
2065         } else if (dst_addr->sa_family == AF_INET6) {
2066                 addr6 = (struct sockaddr_in6 *)dst_addr;
2067                 ip = (char *)&addr6->sin6_addr;
2068                 memcpy(fw_ddb_entry->ip_addr, ip, IPv6_ADDR_LEN);
2069                 fw_ddb_entry->port = cpu_to_le16(ntohs(addr6->sin6_port));
2070                 fw_ddb_entry->options |= DDB_OPT_IPV6_DEVICE;
2071                 DEBUG2(ql4_printk(KERN_INFO, ha,
2072                                   "%s: Destination Address [%pI6]: index [%d]\n",
2073                                    __func__, fw_ddb_entry->ip_addr,
2074                                   ddb_entry->fw_ddb_index));
2075         } else {
2076                 ql4_printk(KERN_ERR, ha,
2077                            "%s: Failed to get IP Address\n",
2078                            __func__);
2079                 rval = -EINVAL;
2080                 goto exit_set_param;
2081         }
2082
2083         /* CHAP */
2084         if (sess->username != NULL && sess->password != NULL) {
2085                 if (strlen(sess->username) && strlen(sess->password)) {
2086                         iscsi_opts |= BIT_7;
2087
2088                         rval = qla4xxx_get_chap_index(ha, sess->username,
2089                                                 sess->password,
2090                                                 LOCAL_CHAP, &idx);
2091                         if (rval)
2092                                 goto exit_set_param;
2093
2094                         fw_ddb_entry->chap_tbl_idx = cpu_to_le16(idx);
2095                 }
2096         }
2097
2098         if (sess->username_in != NULL && sess->password_in != NULL) {
2099                 /* Check if BIDI CHAP */
2100                 if (strlen(sess->username_in) && strlen(sess->password_in)) {
2101                         iscsi_opts |= BIT_4;
2102
2103                         rval = qla4xxx_get_chap_index(ha, sess->username_in,
2104                                                       sess->password_in,
2105                                                       BIDI_CHAP, &idx);
2106                         if (rval)
2107                                 goto exit_set_param;
2108                 }
2109         }
2110
2111         if (sess->initial_r2t_en)
2112                 iscsi_opts |= BIT_10;
2113
2114         if (sess->imm_data_en)
2115                 iscsi_opts |= BIT_11;
2116
2117         fw_ddb_entry->iscsi_options = cpu_to_le16(iscsi_opts);
2118
2119         if (conn->max_recv_dlength)
2120                 fw_ddb_entry->iscsi_max_rcv_data_seg_len =
2121                   __constant_cpu_to_le16((conn->max_recv_dlength / BYTE_UNITS));
2122
2123         if (sess->max_r2t)
2124                 fw_ddb_entry->iscsi_max_outsnd_r2t = cpu_to_le16(sess->max_r2t);
2125
2126         if (sess->first_burst)
2127                 fw_ddb_entry->iscsi_first_burst_len =
2128                        __constant_cpu_to_le16((sess->first_burst / BYTE_UNITS));
2129
2130         if (sess->max_burst)
2131                 fw_ddb_entry->iscsi_max_burst_len =
2132                         __constant_cpu_to_le16((sess->max_burst / BYTE_UNITS));
2133
2134         if (sess->time2wait)
2135                 fw_ddb_entry->iscsi_def_time2wait =
2136                         cpu_to_le16(sess->time2wait);
2137
2138         if (sess->time2retain)
2139                 fw_ddb_entry->iscsi_def_time2retain =
2140                         cpu_to_le16(sess->time2retain);
2141
2142         status = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index,
2143                                        fw_ddb_entry_dma, mbx_sts);
2144
2145         if (status != QLA_SUCCESS)
2146                 rval = -EINVAL;
2147 exit_set_param:
2148         dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
2149                           fw_ddb_entry, fw_ddb_entry_dma);
2150 exit_set_param_no_free:
2151         return rval;
2152 }
2153
2154 int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index,
2155                           uint16_t stats_size, dma_addr_t stats_dma)
2156 {
2157         int status = QLA_SUCCESS;
2158         uint32_t mbox_cmd[MBOX_REG_COUNT];
2159         uint32_t mbox_sts[MBOX_REG_COUNT];
2160
2161         memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
2162         memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
2163         mbox_cmd[0] = MBOX_CMD_GET_MANAGEMENT_DATA;
2164         mbox_cmd[1] = fw_ddb_index;
2165         mbox_cmd[2] = LSDW(stats_dma);
2166         mbox_cmd[3] = MSDW(stats_dma);
2167         mbox_cmd[4] = stats_size;
2168
2169         status = qla4xxx_mailbox_command(ha, 5, 1, &mbox_cmd[0], &mbox_sts[0]);
2170         if (status != QLA_SUCCESS) {
2171                 DEBUG2(ql4_printk(KERN_WARNING, ha,
2172                                   "%s: MBOX_CMD_GET_MANAGEMENT_DATA "
2173                                   "failed w/ status %04X\n", __func__,
2174                                   mbox_sts[0]));
2175         }
2176         return status;
2177 }
2178
2179 int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
2180                          uint32_t ip_idx, uint32_t *sts)
2181 {
2182         uint32_t mbox_cmd[MBOX_REG_COUNT];
2183         uint32_t mbox_sts[MBOX_REG_COUNT];
2184         int status = QLA_SUCCESS;
2185
2186         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2187         memset(&mbox_sts, 0, sizeof(mbox_sts));
2188         mbox_cmd[0] = MBOX_CMD_GET_IP_ADDR_STATE;
2189         mbox_cmd[1] = acb_idx;
2190         mbox_cmd[2] = ip_idx;
2191
2192         status = qla4xxx_mailbox_command(ha, 3, 8, &mbox_cmd[0], &mbox_sts[0]);
2193         if (status != QLA_SUCCESS) {
2194                 DEBUG2(ql4_printk(KERN_WARNING, ha,  "%s: "
2195                                   "MBOX_CMD_GET_IP_ADDR_STATE failed w/ "
2196                                   "status %04X\n", __func__, mbox_sts[0]));
2197         }
2198         memcpy(sts, mbox_sts, sizeof(mbox_sts));
2199         return status;
2200 }
2201
2202 int qla4xxx_get_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
2203                       uint32_t offset, uint32_t size)
2204 {
2205         int status = QLA_SUCCESS;
2206         uint32_t mbox_cmd[MBOX_REG_COUNT];
2207         uint32_t mbox_sts[MBOX_REG_COUNT];
2208
2209         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2210         memset(&mbox_sts, 0, sizeof(mbox_sts));
2211
2212         mbox_cmd[0] = MBOX_CMD_GET_NVRAM;
2213         mbox_cmd[1] = LSDW(nvram_dma);
2214         mbox_cmd[2] = MSDW(nvram_dma);
2215         mbox_cmd[3] = offset;
2216         mbox_cmd[4] = size;
2217
2218         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
2219                                          &mbox_sts[0]);
2220         if (status != QLA_SUCCESS) {
2221                 DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
2222                                   "status %04X\n", ha->host_no, __func__,
2223                                   mbox_sts[0]));
2224         }
2225         return status;
2226 }
2227
2228 int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
2229                       uint32_t offset, uint32_t size)
2230 {
2231         int status = QLA_SUCCESS;
2232         uint32_t mbox_cmd[MBOX_REG_COUNT];
2233         uint32_t mbox_sts[MBOX_REG_COUNT];
2234
2235         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2236         memset(&mbox_sts, 0, sizeof(mbox_sts));
2237
2238         mbox_cmd[0] = MBOX_CMD_SET_NVRAM;
2239         mbox_cmd[1] = LSDW(nvram_dma);
2240         mbox_cmd[2] = MSDW(nvram_dma);
2241         mbox_cmd[3] = offset;
2242         mbox_cmd[4] = size;
2243
2244         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
2245                                          &mbox_sts[0]);
2246         if (status != QLA_SUCCESS) {
2247                 DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
2248                                   "status %04X\n", ha->host_no, __func__,
2249                                   mbox_sts[0]));
2250         }
2251         return status;
2252 }
2253
2254 int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha,
2255                                      uint32_t region, uint32_t field0,
2256                                      uint32_t field1)
2257 {
2258         int status = QLA_SUCCESS;
2259         uint32_t mbox_cmd[MBOX_REG_COUNT];
2260         uint32_t mbox_sts[MBOX_REG_COUNT];
2261
2262         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2263         memset(&mbox_sts, 0, sizeof(mbox_sts));
2264
2265         mbox_cmd[0] = MBOX_CMD_RESTORE_FACTORY_DEFAULTS;
2266         mbox_cmd[3] = region;
2267         mbox_cmd[4] = field0;
2268         mbox_cmd[5] = field1;
2269
2270         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0],
2271                                          &mbox_sts[0]);
2272         if (status != QLA_SUCCESS) {
2273                 DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
2274                                   "status %04X\n", ha->host_no, __func__,
2275                                   mbox_sts[0]));
2276         }
2277         return status;
2278 }
2279
2280 /**
2281  * qla4_8xxx_set_param - set driver version in firmware.
2282  * @ha: Pointer to host adapter structure.
2283  * @param: Parameter to set i.e driver version
2284  **/
2285 int qla4_8xxx_set_param(struct scsi_qla_host *ha, int param)
2286 {
2287         uint32_t mbox_cmd[MBOX_REG_COUNT];
2288         uint32_t mbox_sts[MBOX_REG_COUNT];
2289         uint32_t status;
2290
2291         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2292         memset(&mbox_sts, 0, sizeof(mbox_sts));
2293
2294         mbox_cmd[0] = MBOX_CMD_SET_PARAM;
2295         if (param == SET_DRVR_VERSION) {
2296                 mbox_cmd[1] = SET_DRVR_VERSION;
2297                 strncpy((char *)&mbox_cmd[2], QLA4XXX_DRIVER_VERSION,
2298                         MAX_DRVR_VER_LEN - 1);
2299         } else {
2300                 ql4_printk(KERN_ERR, ha, "%s: invalid parameter 0x%x\n",
2301                            __func__, param);
2302                 status = QLA_ERROR;
2303                 goto exit_set_param;
2304         }
2305
2306         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, mbox_cmd,
2307                                          mbox_sts);
2308         if (status == QLA_ERROR)
2309                 ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
2310                            __func__, mbox_sts[0]);
2311
2312 exit_set_param:
2313         return status;
2314 }
2315
2316 /**
2317  * qla4_83xx_post_idc_ack - post IDC ACK
2318  * @ha: Pointer to host adapter structure.
2319  *
2320  * Posts IDC ACK for IDC Request Notification AEN.
2321  **/
2322 int qla4_83xx_post_idc_ack(struct scsi_qla_host *ha)
2323 {
2324         uint32_t mbox_cmd[MBOX_REG_COUNT];
2325         uint32_t mbox_sts[MBOX_REG_COUNT];
2326         int status;
2327
2328         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2329         memset(&mbox_sts, 0, sizeof(mbox_sts));
2330
2331         mbox_cmd[0] = MBOX_CMD_IDC_ACK;
2332         mbox_cmd[1] = ha->idc_info.request_desc;
2333         mbox_cmd[2] = ha->idc_info.info1;
2334         mbox_cmd[3] = ha->idc_info.info2;
2335         mbox_cmd[4] = ha->idc_info.info3;
2336
2337         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
2338                                          mbox_cmd, mbox_sts);
2339         if (status == QLA_ERROR)
2340                 ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__,
2341                            mbox_sts[0]);
2342         else
2343                ql4_printk(KERN_INFO, ha, "%s: IDC ACK posted\n", __func__);
2344
2345         return status;
2346 }
2347
2348 int qla4_84xx_config_acb(struct scsi_qla_host *ha, int acb_config)
2349 {
2350         uint32_t mbox_cmd[MBOX_REG_COUNT];
2351         uint32_t mbox_sts[MBOX_REG_COUNT];
2352         struct addr_ctrl_blk *acb = NULL;
2353         uint32_t acb_len = sizeof(struct addr_ctrl_blk);
2354         int rval = QLA_SUCCESS;
2355         dma_addr_t acb_dma;
2356
2357         acb = dma_alloc_coherent(&ha->pdev->dev,
2358                                  sizeof(struct addr_ctrl_blk),
2359                                  &acb_dma, GFP_KERNEL);
2360         if (!acb) {
2361                 ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n", __func__);
2362                 rval = QLA_ERROR;
2363                 goto exit_config_acb;
2364         }
2365         memset(acb, 0, acb_len);
2366
2367         switch (acb_config) {
2368         case ACB_CONFIG_DISABLE:
2369                 rval = qla4xxx_get_acb(ha, acb_dma, 0, acb_len);
2370                 if (rval != QLA_SUCCESS)
2371                         goto exit_free_acb;
2372
2373                 rval = qla4xxx_disable_acb(ha);
2374                 if (rval != QLA_SUCCESS)
2375                         goto exit_free_acb;
2376
2377                 if (!ha->saved_acb)
2378                         ha->saved_acb = kzalloc(acb_len, GFP_KERNEL);
2379
2380                 if (!ha->saved_acb) {
2381                         ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n",
2382                                    __func__);
2383                         rval = QLA_ERROR;
2384                         goto exit_free_acb;
2385                 }
2386                 memcpy(ha->saved_acb, acb, acb_len);
2387                 break;
2388         case ACB_CONFIG_SET:
2389
2390                 if (!ha->saved_acb) {
2391                         ql4_printk(KERN_ERR, ha, "%s: Can't set ACB, Saved ACB not available\n",
2392                                    __func__);
2393                         rval = QLA_ERROR;
2394                         goto exit_free_acb;
2395                 }
2396
2397                 memcpy(acb, ha->saved_acb, acb_len);
2398
2399                 rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], acb_dma);
2400                 if (rval != QLA_SUCCESS)
2401                         goto exit_free_acb;
2402
2403                 break;
2404         default:
2405                 ql4_printk(KERN_ERR, ha, "%s: Invalid ACB Configuration\n",
2406                            __func__);
2407         }
2408
2409 exit_free_acb:
2410         dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk), acb,
2411                           acb_dma);
2412 exit_config_acb:
2413         if ((acb_config == ACB_CONFIG_SET) && ha->saved_acb) {
2414                 kfree(ha->saved_acb);
2415                 ha->saved_acb = NULL;
2416         }
2417         DEBUG2(ql4_printk(KERN_INFO, ha,
2418                           "%s %s\n", __func__,
2419                           rval == QLA_SUCCESS ? "SUCCEEDED" : "FAILED"));
2420         return rval;
2421 }
2422
2423 int qla4_83xx_get_port_config(struct scsi_qla_host *ha, uint32_t *config)
2424 {
2425         uint32_t mbox_cmd[MBOX_REG_COUNT];
2426         uint32_t mbox_sts[MBOX_REG_COUNT];
2427         int status;
2428
2429         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2430         memset(&mbox_sts, 0, sizeof(mbox_sts));
2431
2432         mbox_cmd[0] = MBOX_CMD_GET_PORT_CONFIG;
2433
2434         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
2435                                          mbox_cmd, mbox_sts);
2436         if (status == QLA_SUCCESS)
2437                 *config = mbox_sts[1];
2438         else
2439                 ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__,
2440                            mbox_sts[0]);
2441
2442         return status;
2443 }
2444
2445 int qla4_83xx_set_port_config(struct scsi_qla_host *ha, uint32_t *config)
2446 {
2447         uint32_t mbox_cmd[MBOX_REG_COUNT];
2448         uint32_t mbox_sts[MBOX_REG_COUNT];
2449         int status;
2450
2451         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2452         memset(&mbox_sts, 0, sizeof(mbox_sts));
2453
2454         mbox_cmd[0] = MBOX_CMD_SET_PORT_CONFIG;
2455         mbox_cmd[1] = *config;
2456
2457         status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
2458                                 mbox_cmd, mbox_sts);
2459         if (status != QLA_SUCCESS)
2460                 ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__,
2461                            mbox_sts[0]);
2462
2463         return status;
2464 }