Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / scsi / qla2xxx / qla_mr.h
1 /*
2  * QLogic Fibre Channel HBA Driver
3  * Copyright (c)  2003-2014 QLogic Corporation
4  *
5  * See LICENSE.qla2xxx for copyright and licensing details.
6  */
7 #ifndef __QLA_MR_H
8 #define __QLA_MR_H
9
10 /*
11  * The PCI VendorID and DeviceID for our board.
12  */
13 #define PCI_DEVICE_ID_QLOGIC_ISPF001            0xF001
14
15 /* FX00 specific definitions */
16
17 #define FX00_COMMAND_TYPE_7     0x07    /* Command Type 7 entry for 7XXX */
18 struct cmd_type_7_fx00 {
19         uint8_t entry_type;             /* Entry type. */
20         uint8_t entry_count;            /* Entry count. */
21         uint8_t sys_define;             /* System defined. */
22         uint8_t entry_status;           /* Entry Status. */
23
24         uint32_t handle;                /* System handle. */
25         uint8_t reserved_0;
26         uint8_t port_path_ctrl;
27         uint16_t reserved_1;
28
29         __le16 tgt_idx;         /* Target Idx. */
30         uint16_t timeout;               /* Command timeout. */
31
32         __le16 dseg_count;              /* Data segment count. */
33         uint8_t scsi_rsp_dsd_len;
34         uint8_t reserved_2;
35
36         struct scsi_lun lun;            /* LUN (LE). */
37
38         uint8_t cntrl_flags;
39
40         uint8_t task_mgmt_flags;        /* Task management flags. */
41
42         uint8_t task;
43
44         uint8_t crn;
45
46         uint8_t fcp_cdb[MAX_CMDSZ];     /* SCSI command words. */
47         __le32 byte_count;              /* Total byte count. */
48
49         uint32_t dseg_0_address[2];     /* Data segment 0 address. */
50         uint32_t dseg_0_len;            /* Data segment 0 length. */
51 };
52
53 #define STATUS_TYPE_FX00        0x01            /* Status entry. */
54 struct sts_entry_fx00 {
55         uint8_t entry_type;             /* Entry type. */
56         uint8_t entry_count;            /* Entry count. */
57         uint8_t sys_define;             /* System defined. */
58         uint8_t entry_status;           /* Entry Status. */
59
60         uint32_t handle;                /* System handle. */
61         uint32_t reserved_3;            /* System handle. */
62
63         __le16 comp_status;             /* Completion status. */
64         uint16_t reserved_0;            /* OX_ID used by the firmware. */
65
66         __le32 residual_len;            /* FW calc residual transfer length. */
67
68         uint16_t reserved_1;
69         uint16_t state_flags;           /* State flags. */
70
71         uint16_t reserved_2;
72         __le16 scsi_status;             /* SCSI status. */
73
74         uint32_t sense_len;             /* FCP SENSE length. */
75         uint8_t data[32];               /* FCP response/sense information. */
76 };
77
78
79 #define MAX_HANDLE_COUNT        15
80 #define MULTI_STATUS_TYPE_FX00  0x0D
81
82 struct multi_sts_entry_fx00 {
83         uint8_t entry_type;             /* Entry type. */
84         uint8_t entry_count;            /* Entry count. */
85         uint8_t handle_count;
86         uint8_t entry_status;
87
88         __le32 handles[MAX_HANDLE_COUNT];
89 };
90
91 #define TSK_MGMT_IOCB_TYPE_FX00         0x05
92 struct tsk_mgmt_entry_fx00 {
93         uint8_t entry_type;             /* Entry type. */
94         uint8_t entry_count;            /* Entry count. */
95         uint8_t sys_define;
96         uint8_t entry_status;           /* Entry Status. */
97
98         __le32 handle;          /* System handle. */
99
100         uint32_t reserved_0;
101
102         __le16 tgt_id;          /* Target Idx. */
103
104         uint16_t reserved_1;
105         uint16_t reserved_3;
106         uint16_t reserved_4;
107
108         struct scsi_lun lun;            /* LUN (LE). */
109
110         __le32 control_flags;           /* Control Flags. */
111
112         uint8_t reserved_2[32];
113 };
114
115
116 #define ABORT_IOCB_TYPE_FX00    0x08            /* Abort IOCB status. */
117 struct abort_iocb_entry_fx00 {
118         uint8_t entry_type;             /* Entry type. */
119         uint8_t entry_count;            /* Entry count. */
120         uint8_t sys_define;             /* System defined. */
121         uint8_t entry_status;           /* Entry Status. */
122
123         __le32 handle;          /* System handle. */
124         __le32 reserved_0;
125
126         __le16 tgt_id_sts;              /* Completion status. */
127         __le16 options;
128
129         __le32 abort_handle;            /* System handle. */
130         __le32 reserved_2;
131
132         __le16 req_que_no;
133         uint8_t reserved_1[38];
134 };
135
136 #define IOCTL_IOSB_TYPE_FX00    0x0C
137 struct ioctl_iocb_entry_fx00 {
138         uint8_t entry_type;             /* Entry type. */
139         uint8_t entry_count;            /* Entry count. */
140         uint8_t sys_define;             /* System defined. */
141         uint8_t entry_status;           /* Entry Status. */
142
143         uint32_t handle;                /* System handle. */
144         uint32_t reserved_0;            /* System handle. */
145
146         uint16_t comp_func_num;
147         __le16 fw_iotcl_flags;
148
149         __le32 dataword_r;              /* Data word returned */
150         uint32_t adapid;                /* Adapter ID */
151         uint32_t dataword_r_extra;
152
153         __le32 seq_no;
154         uint8_t reserved_2[20];
155         uint32_t residuallen;
156         __le32 status;
157 };
158
159 #define STATUS_CONT_TYPE_FX00 0x04
160
161 #define FX00_IOCB_TYPE          0x0B
162 struct fxdisc_entry_fx00 {
163         uint8_t entry_type;             /* Entry type. */
164         uint8_t entry_count;            /* Entry count. */
165         uint8_t sys_define;             /* System Defined. */
166         uint8_t entry_status;           /* Entry Status. */
167
168         __le32 handle;          /* System handle. */
169         __le32 reserved_0;              /* System handle. */
170
171         __le16 func_num;
172         __le16 req_xfrcnt;
173         __le16 req_dsdcnt;
174         __le16 rsp_xfrcnt;
175         __le16 rsp_dsdcnt;
176         uint8_t flags;
177         uint8_t reserved_1;
178
179         __le32 dseg_rq_address[2];      /* Data segment 0 address. */
180         __le32 dseg_rq_len;             /* Data segment 0 length. */
181         __le32 dseg_rsp_address[2];     /* Data segment 1 address. */
182         __le32 dseg_rsp_len;            /* Data segment 1 length. */
183
184         __le32 dataword;
185         __le32 adapid;
186         __le32 adapid_hi;
187         __le32 dataword_extra;
188 };
189
190 struct qlafx00_tgt_node_info {
191         uint8_t tgt_node_wwpn[WWN_SIZE];
192         uint8_t tgt_node_wwnn[WWN_SIZE];
193         uint32_t tgt_node_state;
194         uint8_t reserved[128];
195         uint32_t reserved_1[8];
196         uint64_t reserved_2[4];
197 } __packed;
198
199 #define QLAFX00_TGT_NODE_INFO sizeof(struct qlafx00_tgt_node_info)
200
201 #define QLAFX00_LINK_STATUS_DOWN        0x10
202 #define QLAFX00_LINK_STATUS_UP          0x11
203
204 #define QLAFX00_PORT_SPEED_2G   0x2
205 #define QLAFX00_PORT_SPEED_4G   0x4
206 #define QLAFX00_PORT_SPEED_8G   0x8
207 #define QLAFX00_PORT_SPEED_10G  0xa
208 struct port_info_data {
209         uint8_t         port_state;
210         uint8_t         port_type;
211         uint16_t        port_identifier;
212         uint32_t        up_port_state;
213         uint8_t         fw_ver_num[32];
214         uint8_t         portal_attrib;
215         uint16_t        host_option;
216         uint8_t         reset_delay;
217         uint8_t         pdwn_retry_cnt;
218         uint16_t        max_luns2tgt;
219         uint8_t         risc_ver;
220         uint8_t         pconn_option;
221         uint16_t        risc_option;
222         uint16_t        max_frame_len;
223         uint16_t        max_iocb_alloc;
224         uint16_t        exec_throttle;
225         uint8_t         retry_cnt;
226         uint8_t         retry_delay;
227         uint8_t         port_name[8];
228         uint8_t         port_id[3];
229         uint8_t         link_status;
230         uint8_t         plink_rate;
231         uint32_t        link_config;
232         uint16_t        adap_haddr;
233         uint8_t         tgt_disc;
234         uint8_t         log_tout;
235         uint8_t         node_name[8];
236         uint16_t        erisc_opt1;
237         uint8_t         resp_acc_tmr;
238         uint8_t         intr_del_tmr;
239         uint8_t         erisc_opt2;
240         uint8_t         alt_port_name[8];
241         uint8_t         alt_node_name[8];
242         uint8_t         link_down_tout;
243         uint8_t         conn_type;
244         uint8_t         fc_fw_mode;
245         uint32_t        uiReserved[48];
246 } __packed;
247
248 /* OS Type Designations */
249 #define OS_TYPE_UNKNOWN             0
250 #define OS_TYPE_LINUX               2
251
252 /* Linux Info */
253 #define SYSNAME_LENGTH              128
254 #define NODENAME_LENGTH             64
255 #define RELEASE_LENGTH              64
256 #define VERSION_LENGTH              64
257 #define MACHINE_LENGTH              64
258 #define DOMNAME_LENGTH              64
259
260 struct host_system_info {
261         uint32_t os_type;
262         char    sysname[SYSNAME_LENGTH];
263         char    nodename[NODENAME_LENGTH];
264         char    release[RELEASE_LENGTH];
265         char    version[VERSION_LENGTH];
266         char    machine[MACHINE_LENGTH];
267         char    domainname[DOMNAME_LENGTH];
268         char    hostdriver[VERSION_LENGTH];
269         uint32_t reserved[64];
270 } __packed;
271
272 struct register_host_info {
273         struct host_system_info     hsi;        /* host system info */
274         uint64_t        utc;                    /* UTC (system time) */
275         uint32_t        reserved[64];           /* future additions */
276 } __packed;
277
278
279 #define QLAFX00_PORT_DATA_INFO (sizeof(struct port_info_data))
280 #define QLAFX00_TGT_NODE_LIST_SIZE (sizeof(uint32_t) * 32)
281
282 struct config_info_data {
283         uint8_t         model_num[16];
284         uint8_t         model_description[80];
285         uint8_t         reserved0[160];
286         uint8_t         symbolic_name[64];
287         uint8_t         serial_num[32];
288         uint8_t         hw_version[16];
289         uint8_t         fw_version[16];
290         uint8_t         uboot_version[16];
291         uint8_t         fru_serial_num[32];
292
293         uint8_t         fc_port_count;
294         uint8_t         iscsi_port_count;
295         uint8_t         reserved1[2];
296
297         uint8_t         mode;
298         uint8_t         log_level;
299         uint8_t         reserved2[2];
300
301         uint32_t        log_size;
302
303         uint8_t         tgt_pres_mode;
304         uint8_t         iqn_flags;
305         uint8_t         lun_mapping;
306
307         uint64_t        adapter_id;
308
309         uint32_t        cluster_key_len;
310         uint8_t         cluster_key[16];
311
312         uint64_t        cluster_master_id;
313         uint64_t        cluster_slave_id;
314         uint8_t         cluster_flags;
315         uint32_t        enabled_capabilities;
316         uint32_t        nominal_temp_value;
317 } __packed;
318
319 #define FXDISC_GET_CONFIG_INFO          0x01
320 #define FXDISC_GET_PORT_INFO            0x02
321 #define FXDISC_GET_TGT_NODE_INFO        0x80
322 #define FXDISC_GET_TGT_NODE_LIST        0x81
323 #define FXDISC_REG_HOST_INFO            0x99
324 #define FXDISC_ABORT_IOCTL              0xff
325
326 #define QLAFX00_HBA_ICNTRL_REG          0x20B08
327 #define QLAFX00_ICR_ENB_MASK            0x80000000
328 #define QLAFX00_ICR_DIS_MASK            0x7fffffff
329 #define QLAFX00_HST_RST_REG             0x18264
330 #define QLAFX00_SOC_TEMP_REG            0x184C4
331 #define QLAFX00_HST_TO_HBA_REG          0x20A04
332 #define QLAFX00_HBA_TO_HOST_REG         0x21B70
333 #define QLAFX00_HST_INT_STS_BITS        0x7
334 #define QLAFX00_BAR1_BASE_ADDR_REG      0x40018
335 #define QLAFX00_PEX0_WIN0_BASE_ADDR_REG 0x41824
336
337 #define QLAFX00_INTR_MB_CMPLT           0x1
338 #define QLAFX00_INTR_RSP_CMPLT          0x2
339 #define QLAFX00_INTR_ASYNC_CMPLT        0x4
340
341 #define QLAFX00_MBA_SYSTEM_ERR          0x8002
342 #define QLAFX00_MBA_TEMP_OVER           0x8005
343 #define QLAFX00_MBA_TEMP_NORM           0x8006
344 #define QLAFX00_MBA_TEMP_CRIT           0x8007
345 #define QLAFX00_MBA_LINK_UP             0x8011
346 #define QLAFX00_MBA_LINK_DOWN           0x8012
347 #define QLAFX00_MBA_PORT_UPDATE         0x8014
348 #define QLAFX00_MBA_SHUTDOWN_RQSTD      0x8062
349
350 #define SOC_SW_RST_CONTROL_REG_CORE0     0x0020800
351 #define SOC_FABRIC_RST_CONTROL_REG       0x0020840
352 #define SOC_FABRIC_CONTROL_REG           0x0020200
353 #define SOC_FABRIC_CONFIG_REG            0x0020204
354 #define SOC_PWR_MANAGEMENT_PWR_DOWN_REG  0x001820C
355
356 #define SOC_INTERRUPT_SOURCE_I_CONTROL_REG     0x0020B00
357 #define SOC_CORE_TIMER_REG                     0x0021850
358 #define SOC_IRQ_ACK_REG                        0x00218b4
359
360 #define CONTINUE_A64_TYPE_FX00  0x03    /* Continuation entry. */
361
362 #define QLAFX00_SET_HST_INTR(ha, value) \
363         WRT_REG_DWORD((ha)->cregbase + QLAFX00_HST_TO_HBA_REG, \
364         value)
365
366 #define QLAFX00_CLR_HST_INTR(ha, value) \
367         WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \
368         ~value)
369
370 #define QLAFX00_RD_INTR_REG(ha) \
371         RD_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG)
372
373 #define QLAFX00_CLR_INTR_REG(ha, value) \
374         WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \
375         ~value)
376
377 #define QLAFX00_SET_HBA_SOC_REG(ha, off, val)\
378         WRT_REG_DWORD((ha)->cregbase + off, val)
379
380 #define QLAFX00_GET_HBA_SOC_REG(ha, off)\
381         RD_REG_DWORD((ha)->cregbase + off)
382
383 #define QLAFX00_HBA_RST_REG(ha, val)\
384         WRT_REG_DWORD((ha)->cregbase + QLAFX00_HST_RST_REG, val)
385
386 #define QLAFX00_RD_ICNTRL_REG(ha) \
387         RD_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG)
388
389 #define QLAFX00_ENABLE_ICNTRL_REG(ha) \
390         WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \
391         (QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) | \
392          QLAFX00_ICR_ENB_MASK))
393
394 #define QLAFX00_DISABLE_ICNTRL_REG(ha) \
395         WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \
396         (QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) & \
397          QLAFX00_ICR_DIS_MASK))
398
399 #define QLAFX00_RD_REG(ha, off) \
400         RD_REG_DWORD((ha)->cregbase + off)
401
402 #define QLAFX00_WR_REG(ha, off, val) \
403         WRT_REG_DWORD((ha)->cregbase + off, val)
404
405 struct qla_mt_iocb_rqst_fx00 {
406         __le32 reserved_0;
407
408         __le16 func_type;
409         uint8_t flags;
410         uint8_t reserved_1;
411
412         __le32 dataword;
413
414         __le32 adapid;
415         __le32 adapid_hi;
416
417         __le32 dataword_extra;
418
419         __le16 req_len;
420         __le16 reserved_2;
421
422         __le16 rsp_len;
423         __le16 reserved_3;
424 };
425
426 struct qla_mt_iocb_rsp_fx00 {
427         uint32_t reserved_1;
428
429         uint16_t func_type;
430         __le16 ioctl_flags;
431
432         __le32 ioctl_data;
433
434         uint32_t adapid;
435         uint32_t adapid_hi;
436
437         uint32_t reserved_2;
438         __le32 seq_number;
439
440         uint8_t reserved_3[20];
441
442         int32_t res_count;
443
444         __le32 status;
445 };
446
447
448 #define MAILBOX_REGISTER_COUNT_FX00     16
449 #define AEN_MAILBOX_REGISTER_COUNT_FX00 8
450 #define MAX_FIBRE_DEVICES_FX00  512
451 #define MAX_LUNS_FX00           0x1024
452 #define MAX_TARGETS_FX00        MAX_ISA_DEVICES
453 #define REQUEST_ENTRY_CNT_FX00          512     /* Number of request entries. */
454 #define RESPONSE_ENTRY_CNT_FX00         256     /* Number of response entries.*/
455
456 /*
457  * Firmware state codes for QLAFX00 adapters
458  */
459 #define FSTATE_FX00_CONFIG_WAIT     0x0000      /* Waiting for driver to issue
460                                                  * Initialize FW Mbox cmd
461                                                  */
462 #define FSTATE_FX00_INITIALIZED     0x1000      /* FW has been initialized by
463                                                  * the driver
464                                                  */
465
466 #define FX00_DEF_RATOV  10
467
468 struct mr_data_fx00 {
469         uint8_t symbolic_name[64];
470         uint8_t serial_num[32];
471         uint8_t hw_version[16];
472         uint8_t fw_version[16];
473         uint8_t uboot_version[16];
474         uint8_t fru_serial_num[32];
475         fc_port_t       fcport;         /* fcport used for requests
476                                          * that are not linked
477                                          * to a particular target
478                                          */
479         uint8_t fw_hbt_en;
480         uint8_t fw_hbt_cnt;
481         uint8_t fw_hbt_miss_cnt;
482         uint32_t old_fw_hbt_cnt;
483         uint16_t fw_reset_timer_tick;
484         uint8_t fw_reset_timer_exp;
485         uint16_t fw_critemp_timer_tick;
486         uint32_t old_aenmbx0_state;
487         uint32_t critical_temperature;
488         bool extended_io_enabled;
489         bool host_info_resend;
490         uint8_t hinfo_resend_timer_tick;
491 };
492
493 #define QLAFX00_EXTENDED_IO_EN_MASK    0x20
494
495 /*
496  * SoC Junction Temperature is stored in
497  * bits 9:1 of SoC Junction Temperature Register
498  * in a firmware specific format format.
499  * To get the temperature in Celsius degrees
500  * the value from this bitfiled should be converted
501  * using this formula:
502  * Temperature (degrees C) = ((3,153,000 - (10,000 * X)) / 13,825)
503  * where X is the bit field value
504  * this macro reads the register, extracts the bitfield value,
505  * performs the calcualtions and returns temperature in Celsius
506  */
507 #define QLAFX00_GET_TEMPERATURE(ha) ((3153000 - (10000 * \
508         ((QLAFX00_RD_REG(ha, QLAFX00_SOC_TEMP_REG) & 0x3FE) >> 1))) / 13825)
509
510
511 #define QLAFX00_LOOP_DOWN_TIME          615     /* 600 */
512 #define QLAFX00_HEARTBEAT_INTERVAL      6       /* number of seconds */
513 #define QLAFX00_HEARTBEAT_MISS_CNT      3       /* number of miss */
514 #define QLAFX00_RESET_INTERVAL          120     /* number of seconds */
515 #define QLAFX00_MAX_RESET_INTERVAL      600     /* number of seconds */
516 #define QLAFX00_CRITEMP_INTERVAL        60      /* number of seconds */
517 #define QLAFX00_HINFO_RESEND_INTERVAL   60      /* number of seconds */
518
519 #define QLAFX00_CRITEMP_THRSHLD         80      /* Celsius degrees */
520
521 /* Max conncurrent IOs that can be queued */
522 #define QLAFX00_MAX_CANQUEUE            1024
523
524 /* IOCTL IOCB abort success */
525 #define QLAFX00_IOCTL_ICOB_ABORT_SUCCESS        0x68
526
527 #endif