kernel/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c

   1 /*
   2  * This module provides common API to set Diagnostic trigger for MPT
   3  * (Message Passing Technology) based controllers
   4  *
   5  * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
   6  * Copyright (C) 2012-2014  LSI Corporation
   7  * Copyright (C) 2013-2014 Avago Technologies
   8  *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License
  12  * as published by the Free Software Foundation; either version 2
  13  * of the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * NO WARRANTY
  21  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  22  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  23  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  24  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  25  * solely responsible for determining the appropriateness of using and
  26  * distributing the Program and assumes all risks associated with its
  27  * exercise of rights under this Agreement, including but not limited to
  28  * the risks and costs of program errors, damage to or loss of data,
  29  * programs or equipment, and unavailability or interruption of operations.
  30
  31  * DISCLAIMER OF LIABILITY
  32  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  33  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  34  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  35  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  36  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  37  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  38  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  39
  40  * You should have received a copy of the GNU General Public License
  41  * along with this program; if not, write to the Free Software
  42  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  43  * USA.
  44  */
  45
  46 #include <linux/kernel.h>
  47 #include <linux/module.h>
  48 #include <linux/errno.h>
  49 #include <linux/init.h>
  50 #include <linux/slab.h>
  51 #include <linux/types.h>
  52 #include <linux/pci.h>
  53 #include <linux/delay.h>
  54 #include <linux/compat.h>
  55 #include <linux/poll.h>
  56
  57 #include <linux/io.h>
  58 #include <linux/uaccess.h>
  59
  60 #include "mpt3sas_base.h"
  61
  62 /**
  63  * _mpt3sas_raise_sigio - notifiy app
  64  * @ioc: per adapter object
  65  * @event_data:
  66  */
  67 static void
  68 _mpt3sas_raise_sigio(struct MPT3SAS_ADAPTER *ioc,
  69         struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
  70 {
  71         Mpi2EventNotificationReply_t *mpi_reply;
  72         u16 sz, event_data_sz;
  73         unsigned long flags;
  74
  75         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n",
  76             ioc->name, __func__));
  77
  78         sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
  79             sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4;
  80         mpi_reply = kzalloc(sz, GFP_KERNEL);
  81         if (!mpi_reply)
  82                 goto out;
  83         mpi_reply->Event = cpu_to_le16(MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED);
  84         event_data_sz = (sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4) / 4;
  85         mpi_reply->EventDataLength = cpu_to_le16(event_data_sz);
  86         memcpy(&mpi_reply->EventData, event_data,
  87             sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
  88         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
  89                 "%s: add to driver event log\n",
  90                 ioc->name, __func__));
  91         mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
  92         kfree(mpi_reply);
  93  out:
  94
  95         /* clearing the diag_trigger_active flag */
  96         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
  97         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
  98                 "%s: clearing diag_trigger_active flag\n",
  99                 ioc->name, __func__));
 100         ioc->diag_trigger_active = 0;
 101         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 102
 103         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
 104             __func__));
 105 }
 106
 107 /**
 108  * mpt3sas_process_trigger_data - process the event data for the trigger
 109  * @ioc: per adapter object
 110  * @event_data:
 111  */
 112 void
 113 mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
 114         struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
 115 {
 116         u8 issue_reset = 0;
 117
 118         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n",
 119             ioc->name, __func__));
 120
 121         /* release the diag buffer trace */
 122         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 123             MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
 124                 dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 125                 "%s: release trace diag buffer\n", ioc->name, __func__));
 126                 mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
 127                     &issue_reset);
 128         }
 129
 130         _mpt3sas_raise_sigio(ioc, event_data);
 131
 132         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
 133             __func__));
 134 }
 135
 136 /**
 137  * mpt3sas_trigger_master - Master trigger handler
 138  * @ioc: per adapter object
 139  * @trigger_bitmask:
 140  *
 141  */
 142 void
 143 mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask)
 144 {
 145         struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
 146         unsigned long flags;
 147         u8 found_match = 0;
 148
 149         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
 150
 151         if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
 152             trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
 153                 goto by_pass_checks;
 154
 155         /* check to see if trace buffers are currently registered */
 156         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 157             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 158                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 159                 return;
 160         }
 161
 162         /* check to see if trace buffers are currently released */
 163         if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 164             MPT3_DIAG_BUFFER_IS_RELEASED) {
 165                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 166                 return;
 167         }
 168
 169  by_pass_checks:
 170
 171         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 172                 "%s: enter - trigger_bitmask = 0x%08x\n",
 173                 ioc->name, __func__, trigger_bitmask));
 174
 175         /* don't send trigger if an trigger is currently active */
 176         if (ioc->diag_trigger_active) {
 177                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 178                 goto out;
 179         }
 180
 181         /* check for the trigger condition */
 182         if (ioc->diag_trigger_master.MasterData & trigger_bitmask) {
 183                 found_match = 1;
 184                 ioc->diag_trigger_active = 1;
 185                 dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 186                 "%s: setting diag_trigger_active flag\n",
 187                 ioc->name, __func__));
 188         }
 189         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 190
 191         if (!found_match)
 192                 goto out;
 193
 194         memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
 195         event_data.trigger_type = MPT3SAS_TRIGGER_MASTER;
 196         event_data.u.master.MasterData = trigger_bitmask;
 197
 198         if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
 199             trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
 200                 _mpt3sas_raise_sigio(ioc, &event_data);
 201         else
 202                 mpt3sas_send_trigger_data_event(ioc, &event_data);
 203
 204  out:
 205         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
 206             __func__));
 207 }
 208
 209 /**
 210  * mpt3sas_trigger_event - Event trigger handler
 211  * @ioc: per adapter object
 212  * @event:
 213  * @log_entry_qualifier:
 214  *
 215  */
 216 void
 217 mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
 218         u16 log_entry_qualifier)
 219 {
 220         struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
 221         struct SL_WH_EVENT_TRIGGER_T *event_trigger;
 222         int i;
 223         unsigned long flags;
 224         u8 found_match;
 225
 226         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
 227
 228         /* check to see if trace buffers are currently registered */
 229         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 230             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 231                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 232                 return;
 233         }
 234
 235         /* check to see if trace buffers are currently released */
 236         if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 237             MPT3_DIAG_BUFFER_IS_RELEASED) {
 238                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 239                 return;
 240         }
 241
 242         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 243                 "%s: enter - event = 0x%04x, log_entry_qualifier = 0x%04x\n",
 244                 ioc->name, __func__, event, log_entry_qualifier));
 245
 246         /* don't send trigger if an trigger is currently active */
 247         if (ioc->diag_trigger_active) {
 248                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 249                 goto out;
 250         }
 251
 252         /* check for the trigger condition */
 253         event_trigger = ioc->diag_trigger_event.EventTriggerEntry;
 254         for (i = 0 , found_match = 0; i < ioc->diag_trigger_event.ValidEntries
 255             && !found_match; i++, event_trigger++) {
 256                 if (event_trigger->EventValue != event)
 257                         continue;
 258                 if (event == MPI2_EVENT_LOG_ENTRY_ADDED) {
 259                         if (event_trigger->LogEntryQualifier ==
 260                             log_entry_qualifier)
 261                                 found_match = 1;
 262                         continue;
 263                 }
 264                 found_match = 1;
 265                 ioc->diag_trigger_active = 1;
 266                 dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 267                         "%s: setting diag_trigger_active flag\n",
 268                         ioc->name, __func__));
 269         }
 270         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 271
 272         if (!found_match)
 273                 goto out;
 274
 275         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 276                 "%s: setting diag_trigger_active flag\n",
 277                 ioc->name, __func__));
 278         memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
 279         event_data.trigger_type = MPT3SAS_TRIGGER_EVENT;
 280         event_data.u.event.EventValue = event;
 281         event_data.u.event.LogEntryQualifier = log_entry_qualifier;
 282         mpt3sas_send_trigger_data_event(ioc, &event_data);
 283  out:
 284         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
 285             __func__));
 286 }
 287
 288 /**
 289  * mpt3sas_trigger_scsi - SCSI trigger handler
 290  * @ioc: per adapter object
 291  * @sense_key:
 292  * @asc:
 293  * @ascq:
 294  *
 295  */
 296 void
 297 mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, u8 asc,
 298         u8 ascq)
 299 {
 300         struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
 301         struct SL_WH_SCSI_TRIGGER_T *scsi_trigger;
 302         int i;
 303         unsigned long flags;
 304         u8 found_match;
 305
 306         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
 307
 308         /* check to see if trace buffers are currently registered */
 309         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 310             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 311                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 312                 return;
 313         }
 314
 315         /* check to see if trace buffers are currently released */
 316         if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 317             MPT3_DIAG_BUFFER_IS_RELEASED) {
 318                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 319                 return;
 320         }
 321
 322         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 323                 "%s: enter - sense_key = 0x%02x, asc = 0x%02x, ascq = 0x%02x\n",
 324                 ioc->name, __func__, sense_key, asc, ascq));
 325
 326         /* don't send trigger if an trigger is currently active */
 327         if (ioc->diag_trigger_active) {
 328                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 329                 goto out;
 330         }
 331
 332         /* check for the trigger condition */
 333         scsi_trigger = ioc->diag_trigger_scsi.SCSITriggerEntry;
 334         for (i = 0 , found_match = 0; i < ioc->diag_trigger_scsi.ValidEntries
 335             && !found_match; i++, scsi_trigger++) {
 336                 if (scsi_trigger->SenseKey != sense_key)
 337                         continue;
 338                 if (!(scsi_trigger->ASC == 0xFF || scsi_trigger->ASC == asc))
 339                         continue;
 340                 if (!(scsi_trigger->ASCQ == 0xFF || scsi_trigger->ASCQ == ascq))
 341                         continue;
 342                 found_match = 1;
 343                 ioc->diag_trigger_active = 1;
 344         }
 345         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 346
 347         if (!found_match)
 348                 goto out;
 349
 350         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 351                 "%s: setting diag_trigger_active flag\n",
 352                 ioc->name, __func__));
 353         memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
 354         event_data.trigger_type = MPT3SAS_TRIGGER_SCSI;
 355         event_data.u.scsi.SenseKey = sense_key;
 356         event_data.u.scsi.ASC = asc;
 357         event_data.u.scsi.ASCQ = ascq;
 358         mpt3sas_send_trigger_data_event(ioc, &event_data);
 359  out:
 360         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
 361             __func__));
 362 }
 363
 364 /**
 365  * mpt3sas_trigger_mpi - MPI trigger handler
 366  * @ioc: per adapter object
 367  * @ioc_status:
 368  * @loginfo:
 369  *
 370  */
 371 void
 372 mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, u32 loginfo)
 373 {
 374         struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
 375         struct SL_WH_MPI_TRIGGER_T *mpi_trigger;
 376         int i;
 377         unsigned long flags;
 378         u8 found_match;
 379
 380         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
 381
 382         /* check to see if trace buffers are currently registered */
 383         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 384             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 385                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 386                 return;
 387         }
 388
 389         /* check to see if trace buffers are currently released */
 390         if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 391             MPT3_DIAG_BUFFER_IS_RELEASED) {
 392                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 393                 return;
 394         }
 395
 396         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 397                 "%s: enter - ioc_status = 0x%04x, loginfo = 0x%08x\n",
 398                 ioc->name, __func__, ioc_status, loginfo));
 399
 400         /* don't send trigger if an trigger is currently active */
 401         if (ioc->diag_trigger_active) {
 402                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 403                 goto out;
 404         }
 405
 406         /* check for the trigger condition */
 407         mpi_trigger = ioc->diag_trigger_mpi.MPITriggerEntry;
 408         for (i = 0 , found_match = 0; i < ioc->diag_trigger_mpi.ValidEntries
 409             && !found_match; i++, mpi_trigger++) {
 410                 if (mpi_trigger->IOCStatus != ioc_status)
 411                         continue;
 412                 if (!(mpi_trigger->IocLogInfo == 0xFFFFFFFF ||
 413                     mpi_trigger->IocLogInfo == loginfo))
 414                         continue;
 415                 found_match = 1;
 416                 ioc->diag_trigger_active = 1;
 417         }
 418         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 419
 420         if (!found_match)
 421                 goto out;
 422
 423         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
 424                 "%s: setting diag_trigger_active flag\n",
 425                 ioc->name, __func__));
 426         memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
 427         event_data.trigger_type = MPT3SAS_TRIGGER_MPI;
 428         event_data.u.mpi.IOCStatus = ioc_status;
 429         event_data.u.mpi.IocLogInfo = loginfo;
 430         mpt3sas_send_trigger_data_event(ioc, &event_data);
 431  out:
 432         dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
 433             __func__));
 434 }