kernel/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h

   1 /*
   2  * Copyright (c) 2000-2014 LSI Corporation.
   3  *
   4  *
   5  *          Name:  mpi2_ioc.h
   6  *         Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
   7  * Creation Date:  October 11, 2006
   8  *
   9  * mpi2_ioc.h Version:  02.00.24
  10  *
  11  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  12  *       prefix are for use only on MPI v2.5 products, and must not be used
  13  *       with MPI v2.0 products. Unless otherwise noted, names beginning with
  14  *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
  15  *
  16  * Version History
  17  * ---------------
  18  *
  19  * Date      Version   Description
  20  * --------  --------  ------------------------------------------------------
  21  * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
  22  * 06-04-07  02.00.01  In IOCFacts Reply structure, renamed MaxDevices to
  23  *                     MaxTargets.
  24  *                     Added TotalImageSize field to FWDownload Request.
  25  *                     Added reserved words to FWUpload Request.
  26  * 06-26-07  02.00.02  Added IR Configuration Change List Event.
  27  * 08-31-07  02.00.03  Removed SystemReplyQueueDepth field from the IOCInit
  28  *                     request and replaced it with
  29  *                     ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
  30  *                     Replaced the MinReplyQueueDepth field of the IOCFacts
  31  *                     reply with MaxReplyDescriptorPostQueueDepth.
  32  *                     Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
  33  *                     depth for the Reply Descriptor Post Queue.
  34  *                     Added SASAddress field to Initiator Device Table
  35  *                     Overflow Event data.
  36  * 10-31-07  02.00.04  Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
  37  *                     for SAS Initiator Device Status Change Event data.
  38  *                     Modified Reason Code defines for SAS Topology Change
  39  *                     List Event data, including adding a bit for PHY Vacant
  40  *                     status, and adding a mask for the Reason Code.
  41  *                     Added define for
  42  *                     MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
  43  *                     Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
  44  * 12-18-07  02.00.05  Added Boot Status defines for the IOCExceptions field of
  45  *                     the IOCFacts Reply.
  46  *                     Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
  47  *                     Moved MPI2_VERSION_UNION to mpi2.h.
  48  *                     Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
  49  *                     instead of enables, and added SASBroadcastPrimitiveMasks
  50  *                     field.
  51  *                     Added Log Entry Added Event and related structure.
  52  * 02-29-08  02.00.06  Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
  53  *                     Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
  54  *                     Added MaxVolumes and MaxPersistentEntries fields to
  55  *                     IOCFacts reply.
  56  *                     Added ProtocalFlags and IOCCapabilities fields to
  57  *                     MPI2_FW_IMAGE_HEADER.
  58  *                     Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
  59  * 03-03-08  02.00.07  Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
  60  *                     a U16 (from a U32).
  61  *                     Removed extra 's' from EventMasks name.
  62  * 06-27-08  02.00.08  Fixed an offset in a comment.
  63  * 10-02-08  02.00.09  Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
  64  *                     Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
  65  *                     renamed MinReplyFrameSize to ReplyFrameSize.
  66  *                     Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
  67  *                     Added two new RAIDOperation values for Integrated RAID
  68  *                     Operations Status Event data.
  69  *                     Added four new IR Configuration Change List Event data
  70  *                     ReasonCode values.
  71  *                     Added two new ReasonCode defines for SAS Device Status
  72  *                     Change Event data.
  73  *                     Added three new DiscoveryStatus bits for the SAS
  74  *                     Discovery event data.
  75  *                     Added Multiplexing Status Change bit to the PhyStatus
  76  *                     field of the SAS Topology Change List event data.
  77  *                     Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
  78  *                     BootFlags are now product-specific.
  79  *                     Added defines for the indivdual signature bytes
  80  *                     for MPI2_INIT_IMAGE_FOOTER.
  81  * 01-19-09  02.00.10  Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
  82  *                     Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
  83  *                     define.
  84  *                     Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
  85  *                     define.
  86  *                     Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
  87  * 05-06-09  02.00.11  Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
  88  *                     Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
  89  *                     Added two new reason codes for SAS Device Status Change
  90  *                     Event.
  91  *                     Added new event: SAS PHY Counter.
  92  * 07-30-09  02.00.12  Added GPIO Interrupt event define and structure.
  93  *                     Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
  94  *                     Added new product id family for 2208.
  95  * 10-28-09  02.00.13  Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
  96  *                     Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
  97  *                     Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
  98  *                     Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
  99  *                     Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
 100  *                     Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
 101  *                     Added Host Based Discovery Phy Event data.
 102  *                     Added defines for ProductID Product field
 103  *                     (MPI2_FW_HEADER_PID_).
 104  *                     Modified values for SAS ProductID Family
 105  *                     (MPI2_FW_HEADER_PID_FAMILY_).
 106  * 02-10-10  02.00.14  Added SAS Quiesce Event structure and defines.
 107  *                     Added PowerManagementControl Request structures and
 108  *                     defines.
 109  * 05-12-10  02.00.15  Marked Task Set Full Event as obsolete.
 110  *                     Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
 111  * 11-10-10  02.00.16  Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
 112  * 02-23-11  02.00.17  Added SAS NOTIFY Primitive event, and added
 113  *                     SASNotifyPrimitiveMasks field to
 114  *                     MPI2_EVENT_NOTIFICATION_REQUEST.
 115  *                     Added Temperature Threshold Event.
 116  *                     Added Host Message Event.
 117  *                     Added Send Host Message request and reply.
 118  * 05-25-11  02.00.18  For Extended Image Header, added
 119  *                     MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
 120  *                     MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
 121  *                     Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
 122  * 08-24-11  02.00.19  Added PhysicalPort field to
 123  *                     MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
 124  *                     Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
 125  * 11-18-11  02.00.20  Incorporating additions for MPI v2.5.
 126  * 03-29-12  02.00.21  Added a product specific range to event values.
 127  * 07-26-12  02.00.22  Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
 128  *                     Added ElapsedSeconds field to
 129  *                     MPI2_EVENT_DATA_IR_OPERATION_STATUS.
 130  * 08-19-13  02.00.23  For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
 131  *                      and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
 132  *                      Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
 133  *                      Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
 134  *                      Added Encrypted Hash Extended Image.
 135  * 12-05-13  02.00.24  Added MPI25_HASH_IMAGE_TYPE_BIOS.
 136  * --------------------------------------------------------------------------
 137  */
 138
 139 #ifndef MPI2_IOC_H
 140 #define MPI2_IOC_H
 141
 142 /*****************************************************************************
 143 *
 144 *              IOC Messages
 145 *
 146 *****************************************************************************/
 147
 148 /****************************************************************************
 149 * IOCInit message
 150 ****************************************************************************/
 151
 152 /*IOCInit Request message */
 153 typedef struct _MPI2_IOC_INIT_REQUEST {
 154         U8 WhoInit;             /*0x00 */
 155         U8 Reserved1;           /*0x01 */
 156         U8 ChainOffset;         /*0x02 */
 157         U8 Function;            /*0x03 */
 158         U16 Reserved2;          /*0x04 */
 159         U8 Reserved3;           /*0x06 */
 160         U8 MsgFlags;            /*0x07 */
 161         U8 VP_ID;               /*0x08 */
 162         U8 VF_ID;               /*0x09 */
 163         U16 Reserved4;          /*0x0A */
 164         U16 MsgVersion;         /*0x0C */
 165         U16 HeaderVersion;      /*0x0E */
 166         U32 Reserved5;          /*0x10 */
 167         U16 Reserved6;          /*0x14 */
 168         U8 Reserved7;           /*0x16 */
 169         U8 HostMSIxVectors;     /*0x17 */
 170         U16 Reserved8;          /*0x18 */
 171         U16 SystemRequestFrameSize;     /*0x1A */
 172         U16 ReplyDescriptorPostQueueDepth;      /*0x1C */
 173         U16 ReplyFreeQueueDepth;        /*0x1E */
 174         U32 SenseBufferAddressHigh;     /*0x20 */
 175         U32 SystemReplyAddressHigh;     /*0x24 */
 176         U64 SystemRequestFrameBaseAddress;      /*0x28 */
 177         U64 ReplyDescriptorPostQueueAddress;    /*0x30 */
 178         U64 ReplyFreeQueueAddress;      /*0x38 */
 179         U64 TimeStamp;          /*0x40 */
 180 } MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST,
 181         Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t;
 182
 183 /*WhoInit values */
 184 #define MPI2_WHOINIT_NOT_INITIALIZED            (0x00)
 185 #define MPI2_WHOINIT_SYSTEM_BIOS                (0x01)
 186 #define MPI2_WHOINIT_ROM_BIOS                   (0x02)
 187 #define MPI2_WHOINIT_PCI_PEER                   (0x03)
 188 #define MPI2_WHOINIT_HOST_DRIVER                (0x04)
 189 #define MPI2_WHOINIT_MANUFACTURER               (0x05)
 190
 191 /* MsgFlags */
 192 #define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE    (0x01)
 193
 194
 195 /*MsgVersion */
 196 #define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK      (0xFF00)
 197 #define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT     (8)
 198 #define MPI2_IOCINIT_MSGVERSION_MINOR_MASK      (0x00FF)
 199 #define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT     (0)
 200
 201 /*HeaderVersion */
 202 #define MPI2_IOCINIT_HDRVERSION_UNIT_MASK       (0xFF00)
 203 #define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT      (8)
 204 #define MPI2_IOCINIT_HDRVERSION_DEV_MASK        (0x00FF)
 205 #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT       (0)
 206
 207 /*minimum depth for a Reply Descriptor Post Queue */
 208 #define MPI2_RDPQ_DEPTH_MIN                     (16)
 209
 210 /* Reply Descriptor Post Queue Array Entry */
 211 typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
 212         U64                 RDPQBaseAddress;                    /* 0x00 */
 213         U32                 Reserved1;                          /* 0x08 */
 214         U32                 Reserved2;                          /* 0x0C */
 215 } MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
 216 *PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
 217 Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry;
 218
 219
 220 /*IOCInit Reply message */
 221 typedef struct _MPI2_IOC_INIT_REPLY {
 222         U8 WhoInit;             /*0x00 */
 223         U8 Reserved1;           /*0x01 */
 224         U8 MsgLength;           /*0x02 */
 225         U8 Function;            /*0x03 */
 226         U16 Reserved2;          /*0x04 */
 227         U8 Reserved3;           /*0x06 */
 228         U8 MsgFlags;            /*0x07 */
 229         U8 VP_ID;               /*0x08 */
 230         U8 VF_ID;               /*0x09 */
 231         U16 Reserved4;          /*0x0A */
 232         U16 Reserved5;          /*0x0C */
 233         U16 IOCStatus;          /*0x0E */
 234         U32 IOCLogInfo;         /*0x10 */
 235 } MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY,
 236         Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t;
 237
 238 /****************************************************************************
 239 * IOCFacts message
 240 ****************************************************************************/
 241
 242 /*IOCFacts Request message */
 243 typedef struct _MPI2_IOC_FACTS_REQUEST {
 244         U16 Reserved1;          /*0x00 */
 245         U8 ChainOffset;         /*0x02 */
 246         U8 Function;            /*0x03 */
 247         U16 Reserved2;          /*0x04 */
 248         U8 Reserved3;           /*0x06 */
 249         U8 MsgFlags;            /*0x07 */
 250         U8 VP_ID;               /*0x08 */
 251         U8 VF_ID;               /*0x09 */
 252         U16 Reserved4;          /*0x0A */
 253 } MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST,
 254         Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t;
 255
 256 /*IOCFacts Reply message */
 257 typedef struct _MPI2_IOC_FACTS_REPLY {
 258         U16 MsgVersion;         /*0x00 */
 259         U8 MsgLength;           /*0x02 */
 260         U8 Function;            /*0x03 */
 261         U16 HeaderVersion;      /*0x04 */
 262         U8 IOCNumber;           /*0x06 */
 263         U8 MsgFlags;            /*0x07 */
 264         U8 VP_ID;               /*0x08 */
 265         U8 VF_ID;               /*0x09 */
 266         U16 Reserved1;          /*0x0A */
 267         U16 IOCExceptions;      /*0x0C */
 268         U16 IOCStatus;          /*0x0E */
 269         U32 IOCLogInfo;         /*0x10 */
 270         U8 MaxChainDepth;       /*0x14 */
 271         U8 WhoInit;             /*0x15 */
 272         U8 NumberOfPorts;       /*0x16 */
 273         U8 MaxMSIxVectors;      /*0x17 */
 274         U16 RequestCredit;      /*0x18 */
 275         U16 ProductID;          /*0x1A */
 276         U32 IOCCapabilities;    /*0x1C */
 277         MPI2_VERSION_UNION FWVersion;   /*0x20 */
 278         U16 IOCRequestFrameSize;        /*0x24 */
 279         U16 IOCMaxChainSegmentSize;     /*0x26 */
 280         U16 MaxInitiators;      /*0x28 */
 281         U16 MaxTargets;         /*0x2A */
 282         U16 MaxSasExpanders;    /*0x2C */
 283         U16 MaxEnclosures;      /*0x2E */
 284         U16 ProtocolFlags;      /*0x30 */
 285         U16 HighPriorityCredit; /*0x32 */
 286         U16 MaxReplyDescriptorPostQueueDepth;   /*0x34 */
 287         U8 ReplyFrameSize;      /*0x36 */
 288         U8 MaxVolumes;          /*0x37 */
 289         U16 MaxDevHandle;       /*0x38 */
 290         U16 MaxPersistentEntries;       /*0x3A */
 291         U16 MinDevHandle;       /*0x3C */
 292         U16 Reserved4;          /*0x3E */
 293 } MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
 294         Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
 295
 296 /*MsgVersion */
 297 #define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK             (0xFF00)
 298 #define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT            (8)
 299 #define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK             (0x00FF)
 300 #define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT            (0)
 301
 302 /*HeaderVersion */
 303 #define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK              (0xFF00)
 304 #define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT             (8)
 305 #define MPI2_IOCFACTS_HDRVERSION_DEV_MASK               (0x00FF)
 306 #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT              (0)
 307
 308 /*IOCExceptions */
 309 #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE     (0x0200)
 310 #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX      (0x0100)
 311
 312 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK              (0x00E0)
 313 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD              (0x0000)
 314 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP            (0x0020)
 315 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED          (0x0040)
 316 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP    (0x0060)
 317
 318 #define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED       (0x0010)
 319 #define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL     (0x0008)
 320 #define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL           (0x0004)
 321 #define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID        (0x0002)
 322 #define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL       (0x0001)
 323
 324 /*defines for WhoInit field are after the IOCInit Request */
 325
 326 /*ProductID field uses MPI2_FW_HEADER_PID_ */
 327
 328 /*IOCCapabilities */
 329 #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE     (0x00040000)
 330 #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE     (0x00020000)
 331 #define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY   (0x00010000)
 332 #define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX            (0x00008000)
 333 #define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR       (0x00004000)
 334 #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY           (0x00002000)
 335 #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID        (0x00001000)
 336 #define MPI2_IOCFACTS_CAPABILITY_TLR                    (0x00000800)
 337 #define MPI2_IOCFACTS_CAPABILITY_MULTICAST              (0x00000100)
 338 #define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET   (0x00000080)
 339 #define MPI2_IOCFACTS_CAPABILITY_EEDP                   (0x00000040)
 340 #define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER        (0x00000020)
 341 #define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER        (0x00000010)
 342 #define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER      (0x00000008)
 343 #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
 344
 345 /*ProtocolFlags */
 346 #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET              (0x0001)
 347 #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR           (0x0002)
 348
 349 /****************************************************************************
 350 * PortFacts message
 351 ****************************************************************************/
 352
 353 /*PortFacts Request message */
 354 typedef struct _MPI2_PORT_FACTS_REQUEST {
 355         U16 Reserved1;          /*0x00 */
 356         U8 ChainOffset;         /*0x02 */
 357         U8 Function;            /*0x03 */
 358         U16 Reserved2;          /*0x04 */
 359         U8 PortNumber;          /*0x06 */
 360         U8 MsgFlags;            /*0x07 */
 361         U8 VP_ID;               /*0x08 */
 362         U8 VF_ID;               /*0x09 */
 363         U16 Reserved3;          /*0x0A */
 364 } MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST,
 365         Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t;
 366
 367 /*PortFacts Reply message */
 368 typedef struct _MPI2_PORT_FACTS_REPLY {
 369         U16 Reserved1;          /*0x00 */
 370         U8 MsgLength;           /*0x02 */
 371         U8 Function;            /*0x03 */
 372         U16 Reserved2;          /*0x04 */
 373         U8 PortNumber;          /*0x06 */
 374         U8 MsgFlags;            /*0x07 */
 375         U8 VP_ID;               /*0x08 */
 376         U8 VF_ID;               /*0x09 */
 377         U16 Reserved3;          /*0x0A */
 378         U16 Reserved4;          /*0x0C */
 379         U16 IOCStatus;          /*0x0E */
 380         U32 IOCLogInfo;         /*0x10 */
 381         U8 Reserved5;           /*0x14 */
 382         U8 PortType;            /*0x15 */
 383         U16 Reserved6;          /*0x16 */
 384         U16 MaxPostedCmdBuffers;        /*0x18 */
 385         U16 Reserved7;          /*0x1A */
 386 } MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY,
 387         Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t;
 388
 389 /*PortType values */
 390 #define MPI2_PORTFACTS_PORTTYPE_INACTIVE            (0x00)
 391 #define MPI2_PORTFACTS_PORTTYPE_FC                  (0x10)
 392 #define MPI2_PORTFACTS_PORTTYPE_ISCSI               (0x20)
 393 #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL        (0x30)
 394 #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL         (0x31)
 395
 396 /****************************************************************************
 397 * PortEnable message
 398 ****************************************************************************/
 399
 400 /*PortEnable Request message */
 401 typedef struct _MPI2_PORT_ENABLE_REQUEST {
 402         U16 Reserved1;          /*0x00 */
 403         U8 ChainOffset;         /*0x02 */
 404         U8 Function;            /*0x03 */
 405         U8 Reserved2;           /*0x04 */
 406         U8 PortFlags;           /*0x05 */
 407         U8 Reserved3;           /*0x06 */
 408         U8 MsgFlags;            /*0x07 */
 409         U8 VP_ID;               /*0x08 */
 410         U8 VF_ID;               /*0x09 */
 411         U16 Reserved4;          /*0x0A */
 412 } MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST,
 413         Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t;
 414
 415 /*PortEnable Reply message */
 416 typedef struct _MPI2_PORT_ENABLE_REPLY {
 417         U16 Reserved1;          /*0x00 */
 418         U8 MsgLength;           /*0x02 */
 419         U8 Function;            /*0x03 */
 420         U8 Reserved2;           /*0x04 */
 421         U8 PortFlags;           /*0x05 */
 422         U8 Reserved3;           /*0x06 */
 423         U8 MsgFlags;            /*0x07 */
 424         U8 VP_ID;               /*0x08 */
 425         U8 VF_ID;               /*0x09 */
 426         U16 Reserved4;          /*0x0A */
 427         U16 Reserved5;          /*0x0C */
 428         U16 IOCStatus;          /*0x0E */
 429         U32 IOCLogInfo;         /*0x10 */
 430 } MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY,
 431         Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t;
 432
 433 /****************************************************************************
 434 * EventNotification message
 435 ****************************************************************************/
 436
 437 /*EventNotification Request message */
 438 #define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS           (4)
 439
 440 typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST {
 441         U16 Reserved1;          /*0x00 */
 442         U8 ChainOffset;         /*0x02 */
 443         U8 Function;            /*0x03 */
 444         U16 Reserved2;          /*0x04 */
 445         U8 Reserved3;           /*0x06 */
 446         U8 MsgFlags;            /*0x07 */
 447         U8 VP_ID;               /*0x08 */
 448         U8 VF_ID;               /*0x09 */
 449         U16 Reserved4;          /*0x0A */
 450         U32 Reserved5;          /*0x0C */
 451         U32 Reserved6;          /*0x10 */
 452         U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];      /*0x14 */
 453         U16 SASBroadcastPrimitiveMasks; /*0x24 */
 454         U16 SASNotifyPrimitiveMasks;    /*0x26 */
 455         U32 Reserved8;          /*0x28 */
 456 } MPI2_EVENT_NOTIFICATION_REQUEST,
 457         *PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
 458         Mpi2EventNotificationRequest_t,
 459         *pMpi2EventNotificationRequest_t;
 460
 461 /*EventNotification Reply message */
 462 typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
 463         U16 EventDataLength;    /*0x00 */
 464         U8 MsgLength;           /*0x02 */
 465         U8 Function;            /*0x03 */
 466         U16 Reserved1;          /*0x04 */
 467         U8 AckRequired;         /*0x06 */
 468         U8 MsgFlags;            /*0x07 */
 469         U8 VP_ID;               /*0x08 */
 470         U8 VF_ID;               /*0x09 */
 471         U16 Reserved2;          /*0x0A */
 472         U16 Reserved3;          /*0x0C */
 473         U16 IOCStatus;          /*0x0E */
 474         U32 IOCLogInfo;         /*0x10 */
 475         U16 Event;              /*0x14 */
 476         U16 Reserved4;          /*0x16 */
 477         U32 EventContext;       /*0x18 */
 478         U32 EventData[1];       /*0x1C */
 479 } MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY,
 480         Mpi2EventNotificationReply_t,
 481         *pMpi2EventNotificationReply_t;
 482
 483 /*AckRequired */
 484 #define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED    (0x00)
 485 #define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED        (0x01)
 486
 487 /*Event */
 488 #define MPI2_EVENT_LOG_DATA                         (0x0001)
 489 #define MPI2_EVENT_STATE_CHANGE                     (0x0002)
 490 #define MPI2_EVENT_HARD_RESET_RECEIVED              (0x0005)
 491 #define MPI2_EVENT_EVENT_CHANGE                     (0x000A)
 492 #define MPI2_EVENT_TASK_SET_FULL                    (0x000E)    /*obsolete */
 493 #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE         (0x000F)
 494 #define MPI2_EVENT_IR_OPERATION_STATUS              (0x0014)
 495 #define MPI2_EVENT_SAS_DISCOVERY                    (0x0016)
 496 #define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE          (0x0017)
 497 #define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE    (0x0018)
 498 #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW          (0x0019)
 499 #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST         (0x001C)
 500 #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE    (0x001D)
 501 #define MPI2_EVENT_IR_VOLUME                        (0x001E)
 502 #define MPI2_EVENT_IR_PHYSICAL_DISK                 (0x001F)
 503 #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST     (0x0020)
 504 #define MPI2_EVENT_LOG_ENTRY_ADDED                  (0x0021)
 505 #define MPI2_EVENT_SAS_PHY_COUNTER                  (0x0022)
 506 #define MPI2_EVENT_GPIO_INTERRUPT                   (0x0023)
 507 #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY         (0x0024)
 508 #define MPI2_EVENT_SAS_QUIESCE                      (0x0025)
 509 #define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE             (0x0026)
 510 #define MPI2_EVENT_TEMP_THRESHOLD                   (0x0027)
 511 #define MPI2_EVENT_HOST_MESSAGE                     (0x0028)
 512 #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE         (0x0029)
 513 #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC             (0x006E)
 514 #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC             (0x007F)
 515
 516 /*Log Entry Added Event data */
 517
 518 /*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
 519 #define MPI2_EVENT_DATA_LOG_DATA_LENGTH             (0x1C)
 520
 521 typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED {
 522         U64 TimeStamp;          /*0x00 */
 523         U32 Reserved1;          /*0x08 */
 524         U16 LogSequence;        /*0x0C */
 525         U16 LogEntryQualifier;  /*0x0E */
 526         U8 VP_ID;               /*0x10 */
 527         U8 VF_ID;               /*0x11 */
 528         U16 Reserved2;          /*0x12 */
 529         U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];    /*0x14 */
 530 } MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
 531         *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
 532         Mpi2EventDataLogEntryAdded_t,
 533         *pMpi2EventDataLogEntryAdded_t;
 534
 535 /*GPIO Interrupt Event data */
 536
 537 typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
 538         U8 GPIONum;             /*0x00 */
 539         U8 Reserved1;           /*0x01 */
 540         U16 Reserved2;          /*0x02 */
 541 } MPI2_EVENT_DATA_GPIO_INTERRUPT,
 542         *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
 543         Mpi2EventDataGpioInterrupt_t,
 544         *pMpi2EventDataGpioInterrupt_t;
 545
 546 /*Temperature Threshold Event data */
 547
 548 typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
 549         U16 Status;             /*0x00 */
 550         U8 SensorNum;           /*0x02 */
 551         U8 Reserved1;           /*0x03 */
 552         U16 CurrentTemperature; /*0x04 */
 553         U16 Reserved2;          /*0x06 */
 554         U32 Reserved3;          /*0x08 */
 555         U32 Reserved4;          /*0x0C */
 556 } MPI2_EVENT_DATA_TEMPERATURE,
 557         *PTR_MPI2_EVENT_DATA_TEMPERATURE,
 558         Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t;
 559
 560 /*Temperature Threshold Event data Status bits */
 561 #define MPI2_EVENT_TEMPERATURE3_EXCEEDED            (0x0008)
 562 #define MPI2_EVENT_TEMPERATURE2_EXCEEDED            (0x0004)
 563 #define MPI2_EVENT_TEMPERATURE1_EXCEEDED            (0x0002)
 564 #define MPI2_EVENT_TEMPERATURE0_EXCEEDED            (0x0001)
 565
 566 /*Host Message Event data */
 567
 568 typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
 569         U8 SourceVF_ID;         /*0x00 */
 570         U8 Reserved1;           /*0x01 */
 571         U16 Reserved2;          /*0x02 */
 572         U32 Reserved3;          /*0x04 */
 573         U32 HostData[1];        /*0x08 */
 574 } MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
 575         Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t;
 576
 577 /*Power Performance Change Event */
 578
 579 typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
 580         U8 CurrentPowerMode;    /*0x00 */
 581         U8 PreviousPowerMode;   /*0x01 */
 582         U16 Reserved1;          /*0x02 */
 583 } MPI2_EVENT_DATA_POWER_PERF_CHANGE,
 584         *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE,
 585         Mpi2EventDataPowerPerfChange_t,
 586         *pMpi2EventDataPowerPerfChange_t;
 587
 588 /*defines for CurrentPowerMode and PreviousPowerMode fields */
 589 #define MPI2_EVENT_PM_INIT_MASK              (0xC0)
 590 #define MPI2_EVENT_PM_INIT_UNAVAILABLE       (0x00)
 591 #define MPI2_EVENT_PM_INIT_HOST              (0x40)
 592 #define MPI2_EVENT_PM_INIT_IO_UNIT           (0x80)
 593 #define MPI2_EVENT_PM_INIT_PCIE_DPA          (0xC0)
 594
 595 #define MPI2_EVENT_PM_MODE_MASK              (0x07)
 596 #define MPI2_EVENT_PM_MODE_UNAVAILABLE       (0x00)
 597 #define MPI2_EVENT_PM_MODE_UNKNOWN           (0x01)
 598 #define MPI2_EVENT_PM_MODE_FULL_POWER        (0x04)
 599 #define MPI2_EVENT_PM_MODE_REDUCED_POWER     (0x05)
 600 #define MPI2_EVENT_PM_MODE_STANDBY           (0x06)
 601
 602 /*Hard Reset Received Event data */
 603
 604 typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED {
 605         U8 Reserved1;           /*0x00 */
 606         U8 Port;                /*0x01 */
 607         U16 Reserved2;          /*0x02 */
 608 } MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
 609         *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
 610         Mpi2EventDataHardResetReceived_t,
 611         *pMpi2EventDataHardResetReceived_t;
 612
 613 /*Task Set Full Event data */
 614 /*  this event is obsolete */
 615
 616 typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL {
 617         U16 DevHandle;          /*0x00 */
 618         U16 CurrentDepth;       /*0x02 */
 619 } MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
 620         Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t;
 621
 622 /*SAS Device Status Change Event data */
 623
 624 typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE {
 625         U16 TaskTag;            /*0x00 */
 626         U8 ReasonCode;          /*0x02 */
 627         U8 PhysicalPort;        /*0x03 */
 628         U8 ASC;                 /*0x04 */
 629         U8 ASCQ;                /*0x05 */
 630         U16 DevHandle;          /*0x06 */
 631         U32 Reserved2;          /*0x08 */
 632         U64 SASAddress;         /*0x0C */
 633         U8 LUN[8];              /*0x14 */
 634 } MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
 635         *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
 636         Mpi2EventDataSasDeviceStatusChange_t,
 637         *pMpi2EventDataSasDeviceStatusChange_t;
 638
 639 /*SAS Device Status Change Event data ReasonCode values */
 640 #define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA                           (0x05)
 641 #define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED                          (0x07)
 642 #define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET                (0x08)
 643 #define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL                  (0x09)
 644 #define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL              (0x0A)
 645 #define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL              (0x0B)
 646 #define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL                  (0x0C)
 647 #define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION                   (0x0D)
 648 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET               (0x0E)
 649 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL              (0x0F)
 650 #define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE                    (0x10)
 651 #define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY       (0x11)
 652 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY   (0x12)
 653
 654 /*Integrated RAID Operation Status Event data */
 655
 656 typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
 657         U16 VolDevHandle;       /*0x00 */
 658         U16 Reserved1;          /*0x02 */
 659         U8 RAIDOperation;       /*0x04 */
 660         U8 PercentComplete;     /*0x05 */
 661         U16 Reserved2;          /*0x06 */
 662         U32 ElapsedSeconds;     /*0x08 */
 663 } MPI2_EVENT_DATA_IR_OPERATION_STATUS,
 664         *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
 665         Mpi2EventDataIrOperationStatus_t,
 666         *pMpi2EventDataIrOperationStatus_t;
 667
 668 /*Integrated RAID Operation Status Event data RAIDOperation values */
 669 #define MPI2_EVENT_IR_RAIDOP_RESYNC                     (0x00)
 670 #define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION       (0x01)
 671 #define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK          (0x02)
 672 #define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT            (0x03)
 673 #define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT       (0x04)
 674
 675 /*Integrated RAID Volume Event data */
 676
 677 typedef struct _MPI2_EVENT_DATA_IR_VOLUME {
 678         U16 VolDevHandle;       /*0x00 */
 679         U8 ReasonCode;          /*0x02 */
 680         U8 Reserved1;           /*0x03 */
 681         U32 NewValue;           /*0x04 */
 682         U32 PreviousValue;      /*0x08 */
 683 } MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME,
 684         Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t;
 685
 686 /*Integrated RAID Volume Event data ReasonCode values */
 687 #define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED        (0x01)
 688 #define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED    (0x02)
 689 #define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED           (0x03)
 690
 691 /*Integrated RAID Physical Disk Event data */
 692
 693 typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
 694         U16 Reserved1;          /*0x00 */
 695         U8 ReasonCode;          /*0x02 */
 696         U8 PhysDiskNum;         /*0x03 */
 697         U16 PhysDiskDevHandle;  /*0x04 */
 698         U16 Reserved2;          /*0x06 */
 699         U16 Slot;               /*0x08 */
 700         U16 EnclosureHandle;    /*0x0A */
 701         U32 NewValue;           /*0x0C */
 702         U32 PreviousValue;      /*0x10 */
 703 } MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
 704         *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
 705         Mpi2EventDataIrPhysicalDisk_t,
 706         *pMpi2EventDataIrPhysicalDisk_t;
 707
 708 /*Integrated RAID Physical Disk Event data ReasonCode values */
 709 #define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED      (0x01)
 710 #define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED  (0x02)
 711 #define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED         (0x03)
 712
 713 /*Integrated RAID Configuration Change List Event data */
 714
 715 /*
 716  *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 717  *one and check NumElements at runtime.
 718  */
 719 #ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
 720 #define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT          (1)
 721 #endif
 722
 723 typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
 724         U16 ElementFlags;       /*0x00 */
 725         U16 VolDevHandle;       /*0x02 */
 726         U8 ReasonCode;          /*0x04 */
 727         U8 PhysDiskNum;         /*0x05 */
 728         U16 PhysDiskDevHandle;  /*0x06 */
 729 } MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
 730         Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t;
 731
 732 /*IR Configuration Change List Event data ElementFlags values */
 733 #define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK   (0x000F)
 734 #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT      (0x0000)
 735 #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
 736 #define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT    (0x0002)
 737
 738 /*IR Configuration Change List Event data ReasonCode values */
 739 #define MPI2_EVENT_IR_CHANGE_RC_ADDED                   (0x01)
 740 #define MPI2_EVENT_IR_CHANGE_RC_REMOVED                 (0x02)
 741 #define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE               (0x03)
 742 #define MPI2_EVENT_IR_CHANGE_RC_HIDE                    (0x04)
 743 #define MPI2_EVENT_IR_CHANGE_RC_UNHIDE                  (0x05)
 744 #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED          (0x06)
 745 #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED          (0x07)
 746 #define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED              (0x08)
 747 #define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED              (0x09)
 748
 749 typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
 750         U8 NumElements;         /*0x00 */
 751         U8 Reserved1;           /*0x01 */
 752         U8 Reserved2;           /*0x02 */
 753         U8 ConfigNum;           /*0x03 */
 754         U32 Flags;              /*0x04 */
 755         MPI2_EVENT_IR_CONFIG_ELEMENT
 756                 ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */
 757 } MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
 758         *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
 759         Mpi2EventDataIrConfigChangeList_t,
 760         *pMpi2EventDataIrConfigChangeList_t;
 761
 762 /*IR Configuration Change List Event data Flags values */
 763 #define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG   (0x00000001)
 764
 765 /*SAS Discovery Event data */
 766
 767 typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY {
 768         U8 Flags;               /*0x00 */
 769         U8 ReasonCode;          /*0x01 */
 770         U8 PhysicalPort;        /*0x02 */
 771         U8 Reserved1;           /*0x03 */
 772         U32 DiscoveryStatus;    /*0x04 */
 773 } MPI2_EVENT_DATA_SAS_DISCOVERY,
 774         *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
 775         Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t;
 776
 777 /*SAS Discovery Event data Flags values */
 778 #define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE                   (0x02)
 779 #define MPI2_EVENT_SAS_DISC_IN_PROGRESS                     (0x01)
 780
 781 /*SAS Discovery Event data ReasonCode values */
 782 #define MPI2_EVENT_SAS_DISC_RC_STARTED                      (0x01)
 783 #define MPI2_EVENT_SAS_DISC_RC_COMPLETED                    (0x02)
 784
 785 /*SAS Discovery Event data DiscoveryStatus values */
 786 #define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED            (0x80000000)
 787 #define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED             (0x40000000)
 788 #define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED               (0x20000000)
 789 #define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED             (0x10000000)
 790 #define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR             (0x08000000)
 791 #define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE    (0x00008000)
 792 #define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE            (0x00004000)
 793 #define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN                (0x00002000)
 794 #define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK        (0x00001000)
 795 #define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE               (0x00000800)
 796 #define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK                       (0x00000400)
 797 #define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK                 (0x00000200)
 798 #define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR                    (0x00000100)
 799 #define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED              (0x00000080)
 800 #define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST                  (0x00000040)
 801 #define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES                (0x00000020)
 802 #define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT                      (0x00000010)
 803 #define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS                   (0x00000004)
 804 #define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE             (0x00000002)
 805 #define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED                    (0x00000001)
 806
 807 /*SAS Broadcast Primitive Event data */
 808
 809 typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE {
 810         U8 PhyNum;              /*0x00 */
 811         U8 Port;                /*0x01 */
 812         U8 PortWidth;           /*0x02 */
 813         U8 Primitive;           /*0x03 */
 814 } MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
 815         *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
 816         Mpi2EventDataSasBroadcastPrimitive_t,
 817         *pMpi2EventDataSasBroadcastPrimitive_t;
 818
 819 /*defines for the Primitive field */
 820 #define MPI2_EVENT_PRIMITIVE_CHANGE                         (0x01)
 821 #define MPI2_EVENT_PRIMITIVE_SES                            (0x02)
 822 #define MPI2_EVENT_PRIMITIVE_EXPANDER                       (0x03)
 823 #define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT             (0x04)
 824 #define MPI2_EVENT_PRIMITIVE_RESERVED3                      (0x05)
 825 #define MPI2_EVENT_PRIMITIVE_RESERVED4                      (0x06)
 826 #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED               (0x07)
 827 #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED               (0x08)
 828
 829 /*SAS Notify Primitive Event data */
 830
 831 typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
 832         U8 PhyNum;              /*0x00 */
 833         U8 Port;                /*0x01 */
 834         U8 Reserved1;           /*0x02 */
 835         U8 Primitive;           /*0x03 */
 836 } MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
 837         *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
 838         Mpi2EventDataSasNotifyPrimitive_t,
 839         *pMpi2EventDataSasNotifyPrimitive_t;
 840
 841 /*defines for the Primitive field */
 842 #define MPI2_EVENT_NOTIFY_ENABLE_SPINUP                     (0x01)
 843 #define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED               (0x02)
 844 #define MPI2_EVENT_NOTIFY_RESERVED1                         (0x03)
 845 #define MPI2_EVENT_NOTIFY_RESERVED2                         (0x04)
 846
 847 /*SAS Initiator Device Status Change Event data */
 848
 849 typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE {
 850         U8 ReasonCode;          /*0x00 */
 851         U8 PhysicalPort;        /*0x01 */
 852         U16 DevHandle;          /*0x02 */
 853         U64 SASAddress;         /*0x04 */
 854 } MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
 855         *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
 856         Mpi2EventDataSasInitDevStatusChange_t,
 857         *pMpi2EventDataSasInitDevStatusChange_t;
 858
 859 /*SAS Initiator Device Status Change event ReasonCode values */
 860 #define MPI2_EVENT_SAS_INIT_RC_ADDED                (0x01)
 861 #define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING       (0x02)
 862
 863 /*SAS Initiator Device Table Overflow Event data */
 864
 865 typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
 866         U16 MaxInit;            /*0x00 */
 867         U16 CurrentInit;        /*0x02 */
 868         U64 SASAddress;         /*0x04 */
 869 } MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
 870         *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
 871         Mpi2EventDataSasInitTableOverflow_t,
 872         *pMpi2EventDataSasInitTableOverflow_t;
 873
 874 /*SAS Topology Change List Event data */
 875
 876 /*
 877  *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 878  *one and check NumEntries at runtime.
 879  */
 880 #ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
 881 #define MPI2_EVENT_SAS_TOPO_PHY_COUNT           (1)
 882 #endif
 883
 884 typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
 885         U16 AttachedDevHandle;  /*0x00 */
 886         U8 LinkRate;            /*0x02 */
 887         U8 PhyStatus;           /*0x03 */
 888 } MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
 889         Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t;
 890
 891 typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
 892         U16 EnclosureHandle;    /*0x00 */
 893         U16 ExpanderDevHandle;  /*0x02 */
 894         U8 NumPhys;             /*0x04 */
 895         U8 Reserved1;           /*0x05 */
 896         U16 Reserved2;          /*0x06 */
 897         U8 NumEntries;          /*0x08 */
 898         U8 StartPhyNum;         /*0x09 */
 899         U8 ExpStatus;           /*0x0A */
 900         U8 PhysicalPort;        /*0x0B */
 901         MPI2_EVENT_SAS_TOPO_PHY_ENTRY
 902         PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT];     /*0x0C */
 903 } MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
 904         *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
 905         Mpi2EventDataSasTopologyChangeList_t,
 906         *pMpi2EventDataSasTopologyChangeList_t;
 907
 908 /*values for the ExpStatus field */
 909 #define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER                  (0x00)
 910 #define MPI2_EVENT_SAS_TOPO_ES_ADDED                        (0x01)
 911 #define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING               (0x02)
 912 #define MPI2_EVENT_SAS_TOPO_ES_RESPONDING                   (0x03)
 913 #define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING         (0x04)
 914
 915 /*defines for the LinkRate field */
 916 #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK                 (0xF0)
 917 #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT                (4)
 918 #define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK                    (0x0F)
 919 #define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT                   (0)
 920
 921 #define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE            (0x00)
 922 #define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED                 (0x01)
 923 #define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED           (0x02)
 924 #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE            (0x03)
 925 #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR                (0x04)
 926 #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS        (0x05)
 927 #define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY              (0x06)
 928 #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5                     (0x08)
 929 #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0                     (0x09)
 930 #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0                     (0x0A)
 931 #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0                   (0x0B)
 932
 933 /*values for the PhyStatus field */
 934 #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT                (0x80)
 935 #define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE             (0x10)
 936 /*values for the PhyStatus ReasonCode sub-field */
 937 #define MPI2_EVENT_SAS_TOPO_RC_MASK                         (0x0F)
 938 #define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED                   (0x01)
 939 #define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING          (0x02)
 940 #define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED                  (0x03)
 941 #define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE                    (0x04)
 942 #define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING         (0x05)
 943
 944 /*SAS Enclosure Device Status Change Event data */
 945
 946 typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
 947         U16 EnclosureHandle;    /*0x00 */
 948         U8 ReasonCode;          /*0x02 */
 949         U8 PhysicalPort;        /*0x03 */
 950         U64 EnclosureLogicalID; /*0x04 */
 951         U16 NumSlots;           /*0x0C */
 952         U16 StartSlot;          /*0x0E */
 953         U32 PhyBits;            /*0x10 */
 954 } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
 955         *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
 956         Mpi2EventDataSasEnclDevStatusChange_t,
 957         *pMpi2EventDataSasEnclDevStatusChange_t;
 958
 959 /*SAS Enclosure Device Status Change event ReasonCode values */
 960 #define MPI2_EVENT_SAS_ENCL_RC_ADDED                (0x01)
 961 #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING       (0x02)
 962
 963 /*SAS PHY Counter Event data */
 964
 965 typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
 966         U64 TimeStamp;          /*0x00 */
 967         U32 Reserved1;          /*0x08 */
 968         U8 PhyEventCode;        /*0x0C */
 969         U8 PhyNum;              /*0x0D */
 970         U16 Reserved2;          /*0x0E */
 971         U32 PhyEventInfo;       /*0x10 */
 972         U8 CounterType;         /*0x14 */
 973         U8 ThresholdWindow;     /*0x15 */
 974         U8 TimeUnits;           /*0x16 */
 975         U8 Reserved3;           /*0x17 */
 976         U32 EventThreshold;     /*0x18 */
 977         U16 ThresholdFlags;     /*0x1C */
 978         U16 Reserved4;          /*0x1E */
 979 } MPI2_EVENT_DATA_SAS_PHY_COUNTER,
 980         *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
 981         Mpi2EventDataSasPhyCounter_t,
 982         *pMpi2EventDataSasPhyCounter_t;
 983
 984 /*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h
 985  *for the PhyEventCode field */
 986
 987 /*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h
 988  *for the CounterType field */
 989
 990 /*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h
 991  *for the TimeUnits field */
 992
 993 /*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h
 994  *for the ThresholdFlags field */
 995
 996 /*SAS Quiesce Event data */
 997
 998 typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
 999         U8 ReasonCode;          /*0x00 */
1000         U8 Reserved1;           /*0x01 */
1001         U16 Reserved2;          /*0x02 */
1002         U32 Reserved3;          /*0x04 */
1003 } MPI2_EVENT_DATA_SAS_QUIESCE,
1004         *PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
1005         Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t;
1006
1007 /*SAS Quiesce Event data ReasonCode values */
1008 #define MPI2_EVENT_SAS_QUIESCE_RC_STARTED                   (0x01)
1009 #define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED                 (0x02)
1010
1011 /*Host Based Discovery Phy Event data */
1012
1013 typedef struct _MPI2_EVENT_HBD_PHY_SAS {
1014         U8 Flags;               /*0x00 */
1015         U8 NegotiatedLinkRate;  /*0x01 */
1016         U8 PhyNum;              /*0x02 */
1017         U8 PhysicalPort;        /*0x03 */
1018         U32 Reserved1;          /*0x04 */
1019         U8 InitialFrame[28];    /*0x08 */
1020 } MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS,
1021         Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t;
1022
1023 /*values for the Flags field */
1024 #define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID        (0x02)
1025 #define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME         (0x01)
1026
1027 /*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h
1028  *for the NegotiatedLinkRate field */
1029
1030 typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
1031         MPI2_EVENT_HBD_PHY_SAS Sas;
1032 } MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR,
1033         Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t;
1034
1035 typedef struct _MPI2_EVENT_DATA_HBD_PHY {
1036         U8 DescriptorType;      /*0x00 */
1037         U8 Reserved1;           /*0x01 */
1038         U16 Reserved2;          /*0x02 */
1039         U32 Reserved3;          /*0x04 */
1040         MPI2_EVENT_HBD_DESCRIPTOR Descriptor;   /*0x08 */
1041 } MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY,
1042         Mpi2EventDataHbdPhy_t,
1043         *pMpi2EventDataMpi2EventDataHbdPhy_t;
1044
1045 /*values for the DescriptorType field */
1046 #define MPI2_EVENT_HBD_DT_SAS               (0x01)
1047
1048 /****************************************************************************
1049 * EventAck message
1050 ****************************************************************************/
1051
1052 /*EventAck Request message */
1053 typedef struct _MPI2_EVENT_ACK_REQUEST {
1054         U16 Reserved1;          /*0x00 */
1055         U8 ChainOffset;         /*0x02 */
1056         U8 Function;            /*0x03 */
1057         U16 Reserved2;          /*0x04 */
1058         U8 Reserved3;           /*0x06 */
1059         U8 MsgFlags;            /*0x07 */
1060         U8 VP_ID;               /*0x08 */
1061         U8 VF_ID;               /*0x09 */
1062         U16 Reserved4;          /*0x0A */
1063         U16 Event;              /*0x0C */
1064         U16 Reserved5;          /*0x0E */
1065         U32 EventContext;       /*0x10 */
1066 } MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST,
1067         Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t;
1068
1069 /*EventAck Reply message */
1070 typedef struct _MPI2_EVENT_ACK_REPLY {
1071         U16 Reserved1;          /*0x00 */
1072         U8 MsgLength;           /*0x02 */
1073         U8 Function;            /*0x03 */
1074         U16 Reserved2;          /*0x04 */
1075         U8 Reserved3;           /*0x06 */
1076         U8 MsgFlags;            /*0x07 */
1077         U8 VP_ID;               /*0x08 */
1078         U8 VF_ID;               /*0x09 */
1079         U16 Reserved4;          /*0x0A */
1080         U16 Reserved5;          /*0x0C */
1081         U16 IOCStatus;          /*0x0E */
1082         U32 IOCLogInfo;         /*0x10 */
1083 } MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY,
1084         Mpi2EventAckReply_t, *pMpi2EventAckReply_t;
1085
1086 /****************************************************************************
1087 * SendHostMessage message
1088 ****************************************************************************/
1089
1090 /*SendHostMessage Request message */
1091 typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
1092         U16 HostDataLength;     /*0x00 */
1093         U8 ChainOffset;         /*0x02 */
1094         U8 Function;            /*0x03 */
1095         U16 Reserved1;          /*0x04 */
1096         U8 Reserved2;           /*0x06 */
1097         U8 MsgFlags;            /*0x07 */
1098         U8 VP_ID;               /*0x08 */
1099         U8 VF_ID;               /*0x09 */
1100         U16 Reserved3;          /*0x0A */
1101         U8 Reserved4;           /*0x0C */
1102         U8 DestVF_ID;           /*0x0D */
1103         U16 Reserved5;          /*0x0E */
1104         U32 Reserved6;          /*0x10 */
1105         U32 Reserved7;          /*0x14 */
1106         U32 Reserved8;          /*0x18 */
1107         U32 Reserved9;          /*0x1C */
1108         U32 Reserved10;         /*0x20 */
1109         U32 HostData[1];        /*0x24 */
1110 } MPI2_SEND_HOST_MESSAGE_REQUEST,
1111         *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
1112         Mpi2SendHostMessageRequest_t,
1113         *pMpi2SendHostMessageRequest_t;
1114
1115 /*SendHostMessage Reply message */
1116 typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
1117         U16 HostDataLength;     /*0x00 */
1118         U8 MsgLength;           /*0x02 */
1119         U8 Function;            /*0x03 */
1120         U16 Reserved1;          /*0x04 */
1121         U8 Reserved2;           /*0x06 */
1122         U8 MsgFlags;            /*0x07 */
1123         U8 VP_ID;               /*0x08 */
1124         U8 VF_ID;               /*0x09 */
1125         U16 Reserved3;          /*0x0A */
1126         U16 Reserved4;          /*0x0C */
1127         U16 IOCStatus;          /*0x0E */
1128         U32 IOCLogInfo;         /*0x10 */
1129 } MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
1130         Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t;
1131
1132 /****************************************************************************
1133 * FWDownload message
1134 ****************************************************************************/
1135
1136 /*MPI v2.0 FWDownload Request message */
1137 typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
1138         U8 ImageType;           /*0x00 */
1139         U8 Reserved1;           /*0x01 */
1140         U8 ChainOffset;         /*0x02 */
1141         U8 Function;            /*0x03 */
1142         U16 Reserved2;          /*0x04 */
1143         U8 Reserved3;           /*0x06 */
1144         U8 MsgFlags;            /*0x07 */
1145         U8 VP_ID;               /*0x08 */
1146         U8 VF_ID;               /*0x09 */
1147         U16 Reserved4;          /*0x0A */
1148         U32 TotalImageSize;     /*0x0C */
1149         U32 Reserved5;          /*0x10 */
1150         MPI2_MPI_SGE_UNION SGL; /*0x14 */
1151 } MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST,
1152         Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest;
1153
1154 #define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT   (0x01)
1155
1156 #define MPI2_FW_DOWNLOAD_ITYPE_FW                   (0x01)
1157 #define MPI2_FW_DOWNLOAD_ITYPE_BIOS                 (0x02)
1158 #define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING        (0x06)
1159 #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1             (0x07)
1160 #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2             (0x08)
1161 #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID             (0x09)
1162 #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE             (0x0A)
1163 #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK    (0x0B)
1164 #define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY           (0x0C)
1165 #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
1166
1167 /*MPI v2.0 FWDownload TransactionContext Element */
1168 typedef struct _MPI2_FW_DOWNLOAD_TCSGE {
1169         U8 Reserved1;           /*0x00 */
1170         U8 ContextSize;         /*0x01 */
1171         U8 DetailsLength;       /*0x02 */
1172         U8 Flags;               /*0x03 */
1173         U32 Reserved2;          /*0x04 */
1174         U32 ImageOffset;        /*0x08 */
1175         U32 ImageSize;          /*0x0C */
1176 } MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE,
1177         Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t;
1178
1179 /*MPI v2.5 FWDownload Request message */
1180 typedef struct _MPI25_FW_DOWNLOAD_REQUEST {
1181         U8 ImageType;           /*0x00 */
1182         U8 Reserved1;           /*0x01 */
1183         U8 ChainOffset;         /*0x02 */
1184         U8 Function;            /*0x03 */
1185         U16 Reserved2;          /*0x04 */
1186         U8 Reserved3;           /*0x06 */
1187         U8 MsgFlags;            /*0x07 */
1188         U8 VP_ID;               /*0x08 */
1189         U8 VF_ID;               /*0x09 */
1190         U16 Reserved4;          /*0x0A */
1191         U32 TotalImageSize;     /*0x0C */
1192         U32 Reserved5;          /*0x10 */
1193         U32 Reserved6;          /*0x14 */
1194         U32 ImageOffset;        /*0x18 */
1195         U32 ImageSize;          /*0x1C */
1196         MPI25_SGE_IO_UNION SGL; /*0x20 */
1197 } MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST,
1198         Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest;
1199
1200 /*FWDownload Reply message */
1201 typedef struct _MPI2_FW_DOWNLOAD_REPLY {
1202         U8 ImageType;           /*0x00 */
1203         U8 Reserved1;           /*0x01 */
1204         U8 MsgLength;           /*0x02 */
1205         U8 Function;            /*0x03 */
1206         U16 Reserved2;          /*0x04 */
1207         U8 Reserved3;           /*0x06 */
1208         U8 MsgFlags;            /*0x07 */
1209         U8 VP_ID;               /*0x08 */
1210         U8 VF_ID;               /*0x09 */
1211         U16 Reserved4;          /*0x0A */
1212         U16 Reserved5;          /*0x0C */
1213         U16 IOCStatus;          /*0x0E */
1214         U32 IOCLogInfo;         /*0x10 */
1215 } MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY,
1216         Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t;
1217
1218 /****************************************************************************
1219 * FWUpload message
1220 ****************************************************************************/
1221
1222 /*MPI v2.0 FWUpload Request message */
1223 typedef struct _MPI2_FW_UPLOAD_REQUEST {
1224         U8 ImageType;           /*0x00 */
1225         U8 Reserved1;           /*0x01 */
1226         U8 ChainOffset;         /*0x02 */
1227         U8 Function;            /*0x03 */
1228         U16 Reserved2;          /*0x04 */
1229         U8 Reserved3;           /*0x06 */
1230         U8 MsgFlags;            /*0x07 */
1231         U8 VP_ID;               /*0x08 */
1232         U8 VF_ID;               /*0x09 */
1233         U16 Reserved4;          /*0x0A */
1234         U32 Reserved5;          /*0x0C */
1235         U32 Reserved6;          /*0x10 */
1236         MPI2_MPI_SGE_UNION SGL; /*0x14 */
1237 } MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST,
1238         Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t;
1239
1240 #define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT         (0x00)
1241 #define MPI2_FW_UPLOAD_ITYPE_FW_FLASH           (0x01)
1242 #define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH         (0x02)
1243 #define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP          (0x05)
1244 #define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING      (0x06)
1245 #define MPI2_FW_UPLOAD_ITYPE_CONFIG_1           (0x07)
1246 #define MPI2_FW_UPLOAD_ITYPE_CONFIG_2           (0x08)
1247 #define MPI2_FW_UPLOAD_ITYPE_MEGARAID           (0x09)
1248 #define MPI2_FW_UPLOAD_ITYPE_COMPLETE           (0x0A)
1249 #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK  (0x0B)
1250
1251 /*MPI v2.0 FWUpload TransactionContext Element */
1252 typedef struct _MPI2_FW_UPLOAD_TCSGE {
1253         U8 Reserved1;           /*0x00 */
1254         U8 ContextSize;         /*0x01 */
1255         U8 DetailsLength;       /*0x02 */
1256         U8 Flags;               /*0x03 */
1257         U32 Reserved2;          /*0x04 */
1258         U32 ImageOffset;        /*0x08 */
1259         U32 ImageSize;          /*0x0C */
1260 } MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE,
1261         Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t;
1262
1263 /*MPI v2.5 FWUpload Request message */
1264 typedef struct _MPI25_FW_UPLOAD_REQUEST {
1265         U8 ImageType;           /*0x00 */
1266         U8 Reserved1;           /*0x01 */
1267         U8 ChainOffset;         /*0x02 */
1268         U8 Function;            /*0x03 */
1269         U16 Reserved2;          /*0x04 */
1270         U8 Reserved3;           /*0x06 */
1271         U8 MsgFlags;            /*0x07 */
1272         U8 VP_ID;               /*0x08 */
1273         U8 VF_ID;               /*0x09 */
1274         U16 Reserved4;          /*0x0A */
1275         U32 Reserved5;          /*0x0C */
1276         U32 Reserved6;          /*0x10 */
1277         U32 Reserved7;          /*0x14 */
1278         U32 ImageOffset;        /*0x18 */
1279         U32 ImageSize;          /*0x1C */
1280         MPI25_SGE_IO_UNION SGL; /*0x20 */
1281 } MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST,
1282         Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t;
1283
1284 /*FWUpload Reply message */
1285 typedef struct _MPI2_FW_UPLOAD_REPLY {
1286         U8 ImageType;           /*0x00 */
1287         U8 Reserved1;           /*0x01 */
1288         U8 MsgLength;           /*0x02 */
1289         U8 Function;            /*0x03 */
1290         U16 Reserved2;          /*0x04 */
1291         U8 Reserved3;           /*0x06 */
1292         U8 MsgFlags;            /*0x07 */
1293         U8 VP_ID;               /*0x08 */
1294         U8 VF_ID;               /*0x09 */
1295         U16 Reserved4;          /*0x0A */
1296         U16 Reserved5;          /*0x0C */
1297         U16 IOCStatus;          /*0x0E */
1298         U32 IOCLogInfo;         /*0x10 */
1299         U32 ActualImageSize;    /*0x14 */
1300 } MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY,
1301         Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t;
1302
1303 /*FW Image Header */
1304 typedef struct _MPI2_FW_IMAGE_HEADER {
1305         U32 Signature;          /*0x00 */
1306         U32 Signature0;         /*0x04 */
1307         U32 Signature1;         /*0x08 */
1308         U32 Signature2;         /*0x0C */
1309         MPI2_VERSION_UNION MPIVersion;  /*0x10 */
1310         MPI2_VERSION_UNION FWVersion;   /*0x14 */
1311         MPI2_VERSION_UNION NVDATAVersion;       /*0x18 */
1312         MPI2_VERSION_UNION PackageVersion;      /*0x1C */
1313         U16 VendorID;           /*0x20 */
1314         U16 ProductID;          /*0x22 */
1315         U16 ProtocolFlags;      /*0x24 */
1316         U16 Reserved26;         /*0x26 */
1317         U32 IOCCapabilities;    /*0x28 */
1318         U32 ImageSize;          /*0x2C */
1319         U32 NextImageHeaderOffset;      /*0x30 */
1320         U32 Checksum;           /*0x34 */
1321         U32 Reserved38;         /*0x38 */
1322         U32 Reserved3C;         /*0x3C */
1323         U32 Reserved40;         /*0x40 */
1324         U32 Reserved44;         /*0x44 */
1325         U32 Reserved48;         /*0x48 */
1326         U32 Reserved4C;         /*0x4C */
1327         U32 Reserved50;         /*0x50 */
1328         U32 Reserved54;         /*0x54 */
1329         U32 Reserved58;         /*0x58 */
1330         U32 Reserved5C;         /*0x5C */
1331         U32 Reserved60;         /*0x60 */
1332         U32 FirmwareVersionNameWhat;    /*0x64 */
1333         U8 FirmwareVersionName[32];     /*0x68 */
1334         U32 VendorNameWhat;     /*0x88 */
1335         U8 VendorName[32];      /*0x8C */
1336         U32 PackageNameWhat;    /*0x88 */
1337         U8 PackageName[32];     /*0x8C */
1338         U32 ReservedD0;         /*0xD0 */
1339         U32 ReservedD4;         /*0xD4 */
1340         U32 ReservedD8;         /*0xD8 */
1341         U32 ReservedDC;         /*0xDC */
1342         U32 ReservedE0;         /*0xE0 */
1343         U32 ReservedE4;         /*0xE4 */
1344         U32 ReservedE8;         /*0xE8 */
1345         U32 ReservedEC;         /*0xEC */
1346         U32 ReservedF0;         /*0xF0 */
1347         U32 ReservedF4;         /*0xF4 */
1348         U32 ReservedF8;         /*0xF8 */
1349         U32 ReservedFC;         /*0xFC */
1350 } MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER,
1351         Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t;
1352
1353 /*Signature field */
1354 #define MPI2_FW_HEADER_SIGNATURE_OFFSET         (0x00)
1355 #define MPI2_FW_HEADER_SIGNATURE_MASK           (0xFF000000)
1356 #define MPI2_FW_HEADER_SIGNATURE                (0xEA000000)
1357
1358 /*Signature0 field */
1359 #define MPI2_FW_HEADER_SIGNATURE0_OFFSET        (0x04)
1360 #define MPI2_FW_HEADER_SIGNATURE0               (0x5AFAA55A)
1361
1362 /*Signature1 field */
1363 #define MPI2_FW_HEADER_SIGNATURE1_OFFSET        (0x08)
1364 #define MPI2_FW_HEADER_SIGNATURE1               (0xA55AFAA5)
1365
1366 /*Signature2 field */
1367 #define MPI2_FW_HEADER_SIGNATURE2_OFFSET        (0x0C)
1368 #define MPI2_FW_HEADER_SIGNATURE2               (0x5AA55AFA)
1369
1370 /*defines for using the ProductID field */
1371 #define MPI2_FW_HEADER_PID_TYPE_MASK            (0xF000)
1372 #define MPI2_FW_HEADER_PID_TYPE_SAS             (0x2000)
1373
1374 #define MPI2_FW_HEADER_PID_PROD_MASK                    (0x0F00)
1375 #define MPI2_FW_HEADER_PID_PROD_A                       (0x0000)
1376 #define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI   (0x0200)
1377 #define MPI2_FW_HEADER_PID_PROD_IR_SCSI                 (0x0700)
1378
1379 #define MPI2_FW_HEADER_PID_FAMILY_MASK          (0x00FF)
1380 /*SAS ProductID Family bits */
1381 #define MPI2_FW_HEADER_PID_FAMILY_2108_SAS      (0x0013)
1382 #define MPI2_FW_HEADER_PID_FAMILY_2208_SAS      (0x0014)
1383 #define MPI25_FW_HEADER_PID_FAMILY_3108_SAS     (0x0021)
1384
1385 /*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
1386
1387 /*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
1388
1389 #define MPI2_FW_HEADER_IMAGESIZE_OFFSET         (0x2C)
1390 #define MPI2_FW_HEADER_NEXTIMAGE_OFFSET         (0x30)
1391 #define MPI2_FW_HEADER_VERNMHWAT_OFFSET         (0x64)
1392
1393 #define MPI2_FW_HEADER_WHAT_SIGNATURE           (0x29232840)
1394
1395 #define MPI2_FW_HEADER_SIZE                     (0x100)
1396
1397 /*Extended Image Header */
1398 typedef struct _MPI2_EXT_IMAGE_HEADER {
1399         U8 ImageType;           /*0x00 */
1400         U8 Reserved1;           /*0x01 */
1401         U16 Reserved2;          /*0x02 */
1402         U32 Checksum;           /*0x04 */
1403         U32 ImageSize;          /*0x08 */
1404         U32 NextImageHeaderOffset;      /*0x0C */
1405         U32 PackageVersion;     /*0x10 */
1406         U32 Reserved3;          /*0x14 */
1407         U32 Reserved4;          /*0x18 */
1408         U32 Reserved5;          /*0x1C */
1409         U8 IdentifyString[32];  /*0x20 */
1410 } MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER,
1411         Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t;
1412
1413 /*useful offsets */
1414 #define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET         (0x00)
1415 #define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET         (0x08)
1416 #define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET         (0x0C)
1417
1418 #define MPI2_EXT_IMAGE_HEADER_SIZE              (0x40)
1419
1420 /*defines for the ImageType field */
1421 #define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED             (0x00)
1422 #define MPI2_EXT_IMAGE_TYPE_FW                      (0x01)
1423 #define MPI2_EXT_IMAGE_TYPE_NVDATA                  (0x03)
1424 #define MPI2_EXT_IMAGE_TYPE_BOOTLOADER              (0x04)
1425 #define MPI2_EXT_IMAGE_TYPE_INITIALIZATION          (0x05)
1426 #define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT            (0x06)
1427 #define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES       (0x07)
1428 #define MPI2_EXT_IMAGE_TYPE_MEGARAID                (0x08)
1429 #define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH          (0x09)
1430 #define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC    (0x80)
1431 #define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC    (0xFF)
1432
1433 #define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)
1434
1435 /*FLASH Layout Extended Image Data */
1436
1437 /*
1438  *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1439  *one and check RegionsPerLayout at runtime.
1440  */
1441 #ifndef MPI2_FLASH_NUMBER_OF_REGIONS
1442 #define MPI2_FLASH_NUMBER_OF_REGIONS        (1)
1443 #endif
1444
1445 /*
1446  *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1447  *one and check NumberOfLayouts at runtime.
1448  */
1449 #ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
1450 #define MPI2_FLASH_NUMBER_OF_LAYOUTS        (1)
1451 #endif
1452
1453 typedef struct _MPI2_FLASH_REGION {
1454         U8 RegionType;          /*0x00 */
1455         U8 Reserved1;           /*0x01 */
1456         U16 Reserved2;          /*0x02 */
1457         U32 RegionOffset;       /*0x04 */
1458         U32 RegionSize;         /*0x08 */
1459         U32 Reserved3;          /*0x0C */
1460 } MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION,
1461         Mpi2FlashRegion_t, *pMpi2FlashRegion_t;
1462
1463 typedef struct _MPI2_FLASH_LAYOUT {
1464         U32 FlashSize;          /*0x00 */
1465         U32 Reserved1;          /*0x04 */
1466         U32 Reserved2;          /*0x08 */
1467         U32 Reserved3;          /*0x0C */
1468         MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */
1469 } MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
1470         Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
1471
1472 typedef struct _MPI2_FLASH_LAYOUT_DATA {
1473         U8 ImageRevision;       /*0x00 */
1474         U8 Reserved1;           /*0x01 */
1475         U8 SizeOfRegion;        /*0x02 */
1476         U8 Reserved2;           /*0x03 */
1477         U16 NumberOfLayouts;    /*0x04 */
1478         U16 RegionsPerLayout;   /*0x06 */
1479         U16 MinimumSectorAlignment;     /*0x08 */
1480         U16 Reserved3;          /*0x0A */
1481         U32 Reserved4;          /*0x0C */
1482         MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */
1483 } MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
1484         Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
1485
1486 /*defines for the RegionType field */
1487 #define MPI2_FLASH_REGION_UNUSED                (0x00)
1488 #define MPI2_FLASH_REGION_FIRMWARE              (0x01)
1489 #define MPI2_FLASH_REGION_BIOS                  (0x02)
1490 #define MPI2_FLASH_REGION_NVDATA                (0x03)
1491 #define MPI2_FLASH_REGION_FIRMWARE_BACKUP       (0x05)
1492 #define MPI2_FLASH_REGION_MFG_INFORMATION       (0x06)
1493 #define MPI2_FLASH_REGION_CONFIG_1              (0x07)
1494 #define MPI2_FLASH_REGION_CONFIG_2              (0x08)
1495 #define MPI2_FLASH_REGION_MEGARAID              (0x09)
1496 #define MPI2_FLASH_REGION_INIT                  (0x0A)
1497
1498 /*ImageRevision */
1499 #define MPI2_FLASH_LAYOUT_IMAGE_REVISION        (0x00)
1500
1501 /*Supported Devices Extended Image Data */
1502
1503 /*
1504  *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1505  *one and check NumberOfDevices at runtime.
1506  */
1507 #ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
1508 #define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES    (1)
1509 #endif
1510
1511 typedef struct _MPI2_SUPPORTED_DEVICE {
1512         U16 DeviceID;           /*0x00 */
1513         U16 VendorID;           /*0x02 */
1514         U16 DeviceIDMask;       /*0x04 */
1515         U16 Reserved1;          /*0x06 */
1516         U8 LowPCIRev;           /*0x08 */
1517         U8 HighPCIRev;          /*0x09 */
1518         U16 Reserved2;          /*0x0A */
1519         U32 Reserved3;          /*0x0C */
1520 } MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE,
1521         Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t;
1522
1523 typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
1524         U8 ImageRevision;       /*0x00 */
1525         U8 Reserved1;           /*0x01 */
1526         U8 NumberOfDevices;     /*0x02 */
1527         U8 Reserved2;           /*0x03 */
1528         U32 Reserved3;          /*0x04 */
1529         MPI2_SUPPORTED_DEVICE
1530         SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
1531 } MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
1532         Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
1533
1534 /*ImageRevision */
1535 #define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION   (0x00)
1536
1537 /*Init Extended Image Data */
1538
1539 typedef struct _MPI2_INIT_IMAGE_FOOTER {
1540         U32 BootFlags;          /*0x00 */
1541         U32 ImageSize;          /*0x04 */
1542         U32 Signature0;         /*0x08 */
1543         U32 Signature1;         /*0x0C */
1544         U32 Signature2;         /*0x10 */
1545         U32 ResetVector;        /*0x14 */
1546 } MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER,
1547         Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t;
1548
1549 /*defines for the BootFlags field */
1550 #define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET        (0x00)
1551
1552 /*defines for the ImageSize field */
1553 #define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET        (0x04)
1554
1555 /*defines for the Signature0 field */
1556 #define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET       (0x08)
1557 #define MPI2_INIT_IMAGE_SIGNATURE0              (0x5AA55AEA)
1558
1559 /*defines for the Signature1 field */
1560 #define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET       (0x0C)
1561 #define MPI2_INIT_IMAGE_SIGNATURE1              (0xA55AEAA5)
1562
1563 /*defines for the Signature2 field */
1564 #define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET       (0x10)
1565 #define MPI2_INIT_IMAGE_SIGNATURE2              (0x5AEAA55A)
1566
1567 /*Signature fields as individual bytes */
1568 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0        (0xEA)
1569 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1        (0x5A)
1570 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2        (0xA5)
1571 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3        (0x5A)
1572
1573 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4        (0xA5)
1574 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5        (0xEA)
1575 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6        (0x5A)
1576 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7        (0xA5)
1577
1578 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8        (0x5A)
1579 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9        (0xA5)
1580 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A        (0xEA)
1581 #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B        (0x5A)
1582
1583 /*defines for the ResetVector field */
1584 #define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET      (0x14)
1585
1586
1587 /* Encrypted Hash Extended Image Data */
1588
1589 typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
1590         U8              HashImageType;          /* 0x00 */
1591         U8              HashAlgorithm;          /* 0x01 */
1592         U8              EncryptionAlgorithm;    /* 0x02 */
1593         U8              Reserved1;              /* 0x03 */
1594         U32             Reserved2;              /* 0x04 */
1595         U32             EncryptedHash[1];       /* 0x08 */ /* variable length */
1596 } MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
1597 Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
1598
1599 /* values for HashImageType */
1600 #define MPI25_HASH_IMAGE_TYPE_UNUSED            (0x00)
1601 #define MPI25_HASH_IMAGE_TYPE_FIRMWARE          (0x01)
1602 #define MPI25_HASH_IMAGE_TYPE_BIOS              (0x02)
1603
1604 /* values for HashAlgorithm */
1605 #define MPI25_HASH_ALGORITHM_UNUSED             (0x00)
1606 #define MPI25_HASH_ALGORITHM_SHA256             (0x01)
1607
1608 /* values for EncryptionAlgorithm */
1609 #define MPI25_ENCRYPTION_ALG_UNUSED             (0x00)
1610 #define MPI25_ENCRYPTION_ALG_RSA256             (0x01)
1611
1612 typedef struct _MPI25_ENCRYPTED_HASH_DATA {
1613         U8                              ImageVersion;           /* 0x00 */
1614         U8                              NumHash;                /* 0x01 */
1615         U16                             Reserved1;              /* 0x02 */
1616         U32                             Reserved2;              /* 0x04 */
1617         MPI25_ENCRYPTED_HASH_ENTRY      EncryptedHashEntry[1];  /* 0x08 */
1618 } MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
1619 Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
1620
1621
1622
1623 /****************************************************************************
1624 * PowerManagementControl message
1625 ****************************************************************************/
1626
1627 /*PowerManagementControl Request message */
1628 typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
1629         U8 Feature;             /*0x00 */
1630         U8 Reserved1;           /*0x01 */
1631         U8 ChainOffset;         /*0x02 */
1632         U8 Function;            /*0x03 */
1633         U16 Reserved2;          /*0x04 */
1634         U8 Reserved3;           /*0x06 */
1635         U8 MsgFlags;            /*0x07 */
1636         U8 VP_ID;               /*0x08 */
1637         U8 VF_ID;               /*0x09 */
1638         U16 Reserved4;          /*0x0A */
1639         U8 Parameter1;          /*0x0C */
1640         U8 Parameter2;          /*0x0D */
1641         U8 Parameter3;          /*0x0E */
1642         U8 Parameter4;          /*0x0F */
1643         U32 Reserved5;          /*0x10 */
1644         U32 Reserved6;          /*0x14 */
1645 } MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
1646         Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t;
1647
1648 /*defines for the Feature field */
1649 #define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND       (0x01)
1650 #define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION   (0x02)
1651 #define MPI2_PM_CONTROL_FEATURE_PCIE_LINK               (0x03)  /*obsolete */
1652 #define MPI2_PM_CONTROL_FEATURE_IOC_SPEED               (0x04)
1653 #define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE    (0x05)
1654 #define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC    (0x80)
1655 #define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC    (0xFF)
1656
1657 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
1658 /*Parameter1 contains a PHY number */
1659 /*Parameter2 indicates power condition action using these defines */
1660 #define MPI2_PM_CONTROL_PARAM2_PARTIAL                  (0x01)
1661 #define MPI2_PM_CONTROL_PARAM2_SLUMBER                  (0x02)
1662 #define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT            (0x03)
1663 /*Parameter3 and Parameter4 are reserved */
1664
1665 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
1666  * Feature */
1667 /*Parameter1 contains SAS port width modulation group number */
1668 /*Parameter2 indicates IOC action using these defines */
1669 #define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP        (0x01)
1670 #define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION        (0x02)
1671 #define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP     (0x03)
1672 /*Parameter3 indicates desired modulation level using these defines */
1673 #define MPI2_PM_CONTROL_PARAM3_25_PERCENT               (0x00)
1674 #define MPI2_PM_CONTROL_PARAM3_50_PERCENT               (0x01)
1675 #define MPI2_PM_CONTROL_PARAM3_75_PERCENT               (0x02)
1676 #define MPI2_PM_CONTROL_PARAM3_100_PERCENT              (0x03)
1677 /*Parameter4 is reserved */
1678
1679 /*this next set (_PCIE_LINK) is obsolete */
1680 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
1681 /*Parameter1 indicates desired PCIe link speed using these defines */
1682 #define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS            (0x00)  /*obsolete */
1683 #define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS            (0x01)  /*obsolete */
1684 #define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS            (0x02)  /*obsolete */
1685 /*Parameter2 indicates desired PCIe link width using these defines */
1686 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X1                 (0x01)  /*obsolete */
1687 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X2                 (0x02)  /*obsolete */
1688 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X4                 (0x04)  /*obsolete */
1689 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X8                 (0x08)  /*obsolete */
1690 /*Parameter3 and Parameter4 are reserved */
1691
1692 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
1693 /*Parameter1 indicates desired IOC hardware clock speed using these defines */
1694 #define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED           (0x01)
1695 #define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED           (0x02)
1696 #define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED        (0x04)
1697 #define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED         (0x08)
1698 /*Parameter2, Parameter3, and Parameter4 are reserved */
1699
1700 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/
1701 /*Parameter1 indicates host action regarding global power management mode */
1702 #define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL             (0x01)
1703 #define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE       (0x02)
1704 #define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL          (0x03)
1705 /*Parameter2 indicates the requested global power management mode */
1706 #define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF            (0x01)
1707 #define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF         (0x08)
1708 #define MPI2_PM_CONTROL_PARAM2_STANDBY                  (0x40)
1709 /*Parameter3 and Parameter4 are reserved */
1710
1711 /*PowerManagementControl Reply message */
1712 typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
1713         U8 Feature;             /*0x00 */
1714         U8 Reserved1;           /*0x01 */
1715         U8 MsgLength;           /*0x02 */
1716         U8 Function;            /*0x03 */
1717         U16 Reserved2;          /*0x04 */
1718         U8 Reserved3;           /*0x06 */
1719         U8 MsgFlags;            /*0x07 */
1720         U8 VP_ID;               /*0x08 */
1721         U8 VF_ID;               /*0x09 */
1722         U16 Reserved4;          /*0x0A */
1723         U16 Reserved5;          /*0x0C */
1724         U16 IOCStatus;          /*0x0E */
1725         U32 IOCLogInfo;         /*0x10 */
1726 } MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
1727         Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t;
1728
1729 #endif