2 * Copyright (c) 2000-2014 LSI Corporation.
6 * Title: MPI Configuration messages and pages
7 * Creation Date: November 10, 2006
9 * mpi2_cnfg.h Version: 02.00.26
11 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
12 * prefix are for use only on MPI v2.5 products, and must not be used
13 * with MPI v2.0 products. Unless otherwise noted, names beginning with
14 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
19 * Date Version Description
20 * -------- -------- ------------------------------------------------------
21 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
22 * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
23 * Added Manufacturing Page 11.
24 * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
26 * 06-26-07 02.00.02 Adding generic structure for product-specific
27 * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
28 * Rework of BIOS Page 2 configuration page.
29 * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
31 * Added configuration pages IOC Page 8 and Driver
32 * Persistent Mapping Page 0.
33 * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
34 * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
35 * RAID Physical Disk Pages 0 and 1, RAID Configuration
37 * Added new value for AccessStatus field of SAS Device
38 * Page 0 (_SATA_NEEDS_INITIALIZATION).
39 * 10-31-07 02.00.04 Added missing SEPDevHandle field to
40 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
41 * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
43 * Modified IOC Page 7 to use masks and added field for
44 * SASBroadcastPrimitiveMasks.
45 * Added MPI2_CONFIG_PAGE_BIOS_4.
46 * Added MPI2_CONFIG_PAGE_LOG_0.
47 * 02-29-08 02.00.06 Modified various names to make them 32-character unique.
48 * Added SAS Device IDs.
49 * Updated Integrated RAID configuration pages including
50 * Manufacturing Page 4, IOC Page 6, and RAID Configuration
52 * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
53 * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
54 * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
55 * Added missing MaxNumRoutedSasAddresses field to
56 * MPI2_CONFIG_PAGE_EXPANDER_0.
57 * Added SAS Port Page 0.
58 * Modified structure layout for
59 * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
60 * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
61 * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
62 * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
64 * Added two new values for the Physical Disk Coercion Size
65 * bits in the Flags field of Manufacturing Page 4.
66 * Added product-specific Manufacturing pages 16 to 31.
67 * Modified Flags bits for controlling write cache on SATA
68 * drives in IO Unit Page 1.
69 * Added new bit to AdditionalControlFlags of SAS IO Unit
70 * Page 1 to control Invalid Topology Correction.
71 * Added additional defines for RAID Volume Page 0
72 * VolumeStatusFlags field.
73 * Modified meaning of RAID Volume Page 0 VolumeSettings
74 * define for auto-configure of hot-swap drives.
75 * Added SupportedPhysDisks field to RAID Volume Page 1 and
76 * added related defines.
77 * Added PhysDiskAttributes field (and related defines) to
78 * RAID Physical Disk Page 0.
79 * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
80 * Added three new DiscoveryStatus bits for SAS IO Unit
81 * Page 0 and SAS Expander Page 0.
82 * Removed multiplexing information from SAS IO Unit pages.
83 * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
84 * Removed Zone Address Resolved bit from PhyInfo and from
85 * Expander Page 0 Flags field.
86 * Added two new AccessStatus values to SAS Device Page 0
87 * for indicating routing problems. Added 3 reserved words
89 * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
90 * Inserted missing reserved field into structure for IOC
92 * Added more pending task bits to RAID Volume Page 0
93 * VolumeStatusFlags defines.
94 * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
95 * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
96 * and SAS Expander Page 0 to flag a downstream initiator
97 * when in simplified routing mode.
98 * Removed SATA Init Failure defines for DiscoveryStatus
99 * fields of SAS IO Unit Page 0 and SAS Expander Page 0.
100 * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
101 * Added PortGroups, DmaGroup, and ControlGroup fields to
103 * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
105 * Added expander reduced functionality data to SAS
107 * Added SAS PHY Page 2 and SAS PHY Page 3.
108 * 07-30-09 02.00.12 Added IO Unit Page 7.
109 * Added new device ids.
110 * Added SAS IO Unit Page 5.
111 * Added partial and slumber power management capable flags
112 * to SAS Device Page 0 Flags field.
113 * Added PhyInfo defines for power condition.
114 * Added Ethernet configuration pages.
115 * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
116 * Added SAS PHY Page 4 structure and defines.
117 * 02-10-10 02.00.14 Modified the comments for the configuration page
118 * structures that contain an array of data. The host
119 * should use the "count" field in the page data (e.g. the
120 * NumPhys field) to determine the number of valid elements
122 * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
123 * Added PowerManagementCapabilities to IO Unit Page 7.
124 * Added PortWidthModGroup field to
125 * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
126 * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
127 * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
128 * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
129 * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
131 * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
132 * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
133 * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
135 * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
136 * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
138 * Added BoardTemperature and BoardTemperatureUnits fields
139 * to MPI2_CONFIG_PAGE_IO_UNIT_7.
140 * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
141 * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
142 * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
143 * Added IO Unit Page 8, IO Unit Page 9,
144 * and IO Unit Page 10.
145 * Added SASNotifyPrimitiveMasks field to
146 * MPI2_CONFIG_PAGE_IOC_7.
147 * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
148 * 05-25-11 02.00.20 Cleaned up a few comments.
149 * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities
150 * for PCIe link as obsolete.
151 * Added SpinupFlags field containing a Disable Spin-up bit
152 * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO
154 * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
155 * Added UEFIVersion field to BIOS Page 1 and defined new
157 * Incorporating additions for MPI v2.5.
158 * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
159 * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
160 * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
161 * obsolete for MPI v2.5 and later.
162 * Added some defines for 12G SAS speeds.
163 * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
164 * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
165 * match the specification.
166 * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
168 * --------------------------------------------------------------------------
174 /*****************************************************************************
175 * Configuration Page Header and defines
176 *****************************************************************************/
178 /*Config Page Header */
179 typedef struct _MPI2_CONFIG_PAGE_HEADER {
180 U8 PageVersion; /*0x00 */
181 U8 PageLength; /*0x01 */
182 U8 PageNumber; /*0x02 */
183 U8 PageType; /*0x03 */
184 } MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER,
185 Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t;
187 typedef union _MPI2_CONFIG_PAGE_HEADER_UNION {
188 MPI2_CONFIG_PAGE_HEADER Struct;
192 } MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
193 Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion;
195 /*Extended Config Page Header */
196 typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER {
197 U8 PageVersion; /*0x00 */
198 U8 Reserved1; /*0x01 */
199 U8 PageNumber; /*0x02 */
200 U8 PageType; /*0x03 */
201 U16 ExtPageLength; /*0x04 */
202 U8 ExtPageType; /*0x06 */
203 U8 Reserved2; /*0x07 */
204 } MPI2_CONFIG_EXTENDED_PAGE_HEADER,
205 *PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
206 Mpi2ConfigExtendedPageHeader_t,
207 *pMpi2ConfigExtendedPageHeader_t;
209 typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
210 MPI2_CONFIG_PAGE_HEADER Struct;
211 MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
215 } MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
216 *PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
217 Mpi2ConfigPageExtendedHeaderUnion,
218 *pMpi2ConfigPageExtendedHeaderUnion;
221 /*PageType field values */
222 #define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00)
223 #define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10)
224 #define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20)
225 #define MPI2_CONFIG_PAGEATTR_MASK (0xF0)
227 #define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00)
228 #define MPI2_CONFIG_PAGETYPE_IOC (0x01)
229 #define MPI2_CONFIG_PAGETYPE_BIOS (0x02)
230 #define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
231 #define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09)
232 #define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
233 #define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F)
234 #define MPI2_CONFIG_PAGETYPE_MASK (0x0F)
236 #define MPI2_CONFIG_TYPENUM_MASK (0x0FFF)
239 /*ExtPageType field values */
240 #define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
241 #define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
242 #define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
243 #define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
244 #define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14)
245 #define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15)
246 #define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
247 #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
248 #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
249 #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
250 #define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
253 /*****************************************************************************
254 * PageAddress defines
255 *****************************************************************************/
257 /*RAID Volume PageAddress format */
258 #define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000)
259 #define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
260 #define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000)
262 #define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF)
265 /*RAID Physical Disk PageAddress format */
266 #define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000)
267 #define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000)
268 #define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000)
269 #define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000)
271 #define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
272 #define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF)
275 /*SAS Expander PageAddress format */
276 #define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000)
277 #define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
278 #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000)
279 #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000)
281 #define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF)
282 #define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000)
283 #define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
286 /*SAS Device PageAddress format */
287 #define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
288 #define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
289 #define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000)
291 #define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
294 /*SAS PHY PageAddress format */
295 #define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000)
296 #define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
297 #define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000)
299 #define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF)
300 #define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF)
303 /*SAS Port PageAddress format */
304 #define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000)
305 #define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
306 #define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
308 #define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF)
311 /*SAS Enclosure PageAddress format */
312 #define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000)
313 #define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
314 #define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
316 #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
319 /*RAID Configuration PageAddress format */
320 #define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
321 #define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000)
322 #define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000)
323 #define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000)
325 #define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF)
328 /*Driver Persistent Mapping PageAddress format */
329 #define MPI2_DPM_PGAD_FORM_MASK (0xF0000000)
330 #define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000)
332 #define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000)
333 #define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16)
334 #define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
337 /*Ethernet PageAddress format */
338 #define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
339 #define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
341 #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
345 /****************************************************************************
346 * Configuration messages
347 ****************************************************************************/
349 /*Configuration Request Message */
350 typedef struct _MPI2_CONFIG_REQUEST {
352 U8 SGLFlags; /*0x01 */
353 U8 ChainOffset; /*0x02 */
354 U8 Function; /*0x03 */
355 U16 ExtPageLength; /*0x04 */
356 U8 ExtPageType; /*0x06 */
357 U8 MsgFlags; /*0x07 */
360 U16 Reserved1; /*0x0A */
361 U8 Reserved2; /*0x0C */
362 U8 ProxyVF_ID; /*0x0D */
363 U16 Reserved4; /*0x0E */
364 U32 Reserved3; /*0x10 */
365 MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
366 U32 PageAddress; /*0x18 */
367 MPI2_SGE_IO_UNION PageBufferSGE; /*0x1C */
368 } MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST,
369 Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t;
371 /*values for the Action field */
372 #define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00)
373 #define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
374 #define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
375 #define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03)
376 #define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
377 #define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
378 #define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
379 #define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07)
381 /*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
384 /*Config Reply Message */
385 typedef struct _MPI2_CONFIG_REPLY {
387 U8 SGLFlags; /*0x01 */
388 U8 MsgLength; /*0x02 */
389 U8 Function; /*0x03 */
390 U16 ExtPageLength; /*0x04 */
391 U8 ExtPageType; /*0x06 */
392 U8 MsgFlags; /*0x07 */
395 U16 Reserved1; /*0x0A */
396 U16 Reserved2; /*0x0C */
397 U16 IOCStatus; /*0x0E */
398 U32 IOCLogInfo; /*0x10 */
399 MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
400 } MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY,
401 Mpi2ConfigReply_t, *pMpi2ConfigReply_t;
405 /*****************************************************************************
407 * C o n f i g u r a t i o n P a g e s
409 *****************************************************************************/
411 /****************************************************************************
412 * Manufacturing Config pages
413 ****************************************************************************/
415 #define MPI2_MFGPAGE_VENDORID_LSI (0x1000)
417 /*MPI v2.0 SAS products */
418 #define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070)
419 #define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072)
420 #define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074)
421 #define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076)
422 #define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
423 #define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
424 #define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
426 #define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E)
428 #define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
429 #define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
430 #define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
431 #define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
432 #define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
433 #define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
434 #define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
435 #define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
436 #define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
438 /*MPI v2.5 SAS products */
439 #define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096)
440 #define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097)
441 #define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090)
442 #define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091)
443 #define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094)
444 #define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095)
449 /*Manufacturing Page 0 */
451 typedef struct _MPI2_CONFIG_PAGE_MAN_0 {
452 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
453 U8 ChipName[16]; /*0x04 */
454 U8 ChipRevision[8]; /*0x14 */
455 U8 BoardName[16]; /*0x1C */
456 U8 BoardAssembly[16]; /*0x2C */
457 U8 BoardTracerNumber[16]; /*0x3C */
458 } MPI2_CONFIG_PAGE_MAN_0,
459 *PTR_MPI2_CONFIG_PAGE_MAN_0,
460 Mpi2ManufacturingPage0_t,
461 *pMpi2ManufacturingPage0_t;
463 #define MPI2_MANUFACTURING0_PAGEVERSION (0x00)
466 /*Manufacturing Page 1 */
468 typedef struct _MPI2_CONFIG_PAGE_MAN_1 {
469 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
470 U8 VPD[256]; /*0x04 */
471 } MPI2_CONFIG_PAGE_MAN_1,
472 *PTR_MPI2_CONFIG_PAGE_MAN_1,
473 Mpi2ManufacturingPage1_t,
474 *pMpi2ManufacturingPage1_t;
476 #define MPI2_MANUFACTURING1_PAGEVERSION (0x00)
479 typedef struct _MPI2_CHIP_REVISION_ID {
480 U16 DeviceID; /*0x00 */
481 U8 PCIRevisionID; /*0x02 */
482 U8 Reserved; /*0x03 */
483 } MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID,
484 Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t;
487 /*Manufacturing Page 2 */
490 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
491 *one and check Header.PageLength at runtime.
493 #ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
494 #define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
497 typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
498 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
499 MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
501 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */
502 } MPI2_CONFIG_PAGE_MAN_2,
503 *PTR_MPI2_CONFIG_PAGE_MAN_2,
504 Mpi2ManufacturingPage2_t,
505 *pMpi2ManufacturingPage2_t;
507 #define MPI2_MANUFACTURING2_PAGEVERSION (0x00)
510 /*Manufacturing Page 3 */
513 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
514 *one and check Header.PageLength at runtime.
516 #ifndef MPI2_MAN_PAGE_3_INFO_WORDS
517 #define MPI2_MAN_PAGE_3_INFO_WORDS (1)
520 typedef struct _MPI2_CONFIG_PAGE_MAN_3 {
521 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
522 MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
524 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */
525 } MPI2_CONFIG_PAGE_MAN_3,
526 *PTR_MPI2_CONFIG_PAGE_MAN_3,
527 Mpi2ManufacturingPage3_t,
528 *pMpi2ManufacturingPage3_t;
530 #define MPI2_MANUFACTURING3_PAGEVERSION (0x00)
533 /*Manufacturing Page 4 */
535 typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS {
536 U8 PowerSaveFlags; /*0x00 */
537 U8 InternalOperationsSleepTime; /*0x01 */
538 U8 InternalOperationsRunTime; /*0x02 */
539 U8 HostIdleTime; /*0x03 */
540 } MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
541 *PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
542 Mpi2ManPage4PwrSaveSettings_t,
543 *pMpi2ManPage4PwrSaveSettings_t;
545 /*defines for the PowerSaveFlags field */
546 #define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03)
547 #define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00)
548 #define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01)
549 #define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02)
551 typedef struct _MPI2_CONFIG_PAGE_MAN_4 {
552 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
553 U32 Reserved1; /*0x04 */
555 U8 InquirySize; /*0x0C */
556 U8 Reserved2; /*0x0D */
557 U16 Reserved3; /*0x0E */
558 U8 InquiryData[56]; /*0x10 */
559 U32 RAID0VolumeSettings; /*0x48 */
560 U32 RAID1EVolumeSettings; /*0x4C */
561 U32 RAID1VolumeSettings; /*0x50 */
562 U32 RAID10VolumeSettings; /*0x54 */
563 U32 Reserved4; /*0x58 */
564 U32 Reserved5; /*0x5C */
565 MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /*0x60 */
566 U8 MaxOCEDisks; /*0x64 */
567 U8 ResyncRate; /*0x65 */
568 U16 DataScrubDuration; /*0x66 */
569 U8 MaxHotSpares; /*0x68 */
570 U8 MaxPhysDisksPerVol; /*0x69 */
571 U8 MaxPhysDisks; /*0x6A */
572 U8 MaxVolumes; /*0x6B */
573 } MPI2_CONFIG_PAGE_MAN_4,
574 *PTR_MPI2_CONFIG_PAGE_MAN_4,
575 Mpi2ManufacturingPage4_t,
576 *pMpi2ManufacturingPage4_t;
578 #define MPI2_MANUFACTURING4_PAGEVERSION (0x0A)
580 /*Manufacturing Page 4 Flags field */
581 #define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000)
582 #define MPI2_MANPAGE4_METADATA_512MB (0x00000000)
584 #define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000)
585 #define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000)
586 #define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000)
588 #define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00)
589 #define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000)
590 #define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400)
591 #define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800)
592 #define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00)
594 #define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300)
595 #define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000)
596 #define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100)
597 #define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200)
599 #define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080)
600 #define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040)
601 #define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020)
602 #define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010)
603 #define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008)
604 #define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004)
605 #define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002)
606 #define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001)
609 /*Manufacturing Page 5 */
612 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
613 *one and check the value returned for NumPhys at runtime.
615 #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
616 #define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
619 typedef struct _MPI2_MANUFACTURING5_ENTRY {
621 U64 DeviceName; /*0x08 */
622 } MPI2_MANUFACTURING5_ENTRY,
623 *PTR_MPI2_MANUFACTURING5_ENTRY,
624 Mpi2Manufacturing5Entry_t,
625 *pMpi2Manufacturing5Entry_t;
627 typedef struct _MPI2_CONFIG_PAGE_MAN_5 {
628 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
629 U8 NumPhys; /*0x04 */
630 U8 Reserved1; /*0x05 */
631 U16 Reserved2; /*0x06 */
632 U32 Reserved3; /*0x08 */
633 U32 Reserved4; /*0x0C */
634 MPI2_MANUFACTURING5_ENTRY
635 Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */
636 } MPI2_CONFIG_PAGE_MAN_5,
637 *PTR_MPI2_CONFIG_PAGE_MAN_5,
638 Mpi2ManufacturingPage5_t,
639 *pMpi2ManufacturingPage5_t;
641 #define MPI2_MANUFACTURING5_PAGEVERSION (0x03)
644 /*Manufacturing Page 6 */
646 typedef struct _MPI2_CONFIG_PAGE_MAN_6 {
647 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
648 U32 ProductSpecificInfo;/*0x04 */
649 } MPI2_CONFIG_PAGE_MAN_6,
650 *PTR_MPI2_CONFIG_PAGE_MAN_6,
651 Mpi2ManufacturingPage6_t,
652 *pMpi2ManufacturingPage6_t;
654 #define MPI2_MANUFACTURING6_PAGEVERSION (0x00)
657 /*Manufacturing Page 7 */
659 typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
660 U32 Pinout; /*0x00 */
661 U8 Connector[16]; /*0x04 */
662 U8 Location; /*0x14 */
663 U8 ReceptacleID; /*0x15 */
665 U32 Reserved2; /*0x18 */
666 } MPI2_MANPAGE7_CONNECTOR_INFO,
667 *PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
668 Mpi2ManPage7ConnectorInfo_t,
669 *pMpi2ManPage7ConnectorInfo_t;
671 /*defines for the Pinout field */
672 #define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00)
673 #define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8)
675 #define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF)
676 #define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00)
677 #define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01)
678 #define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02)
679 #define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03)
680 #define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04)
681 #define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05)
682 #define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06)
683 #define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07)
684 #define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08)
685 #define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09)
686 #define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A)
687 #define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
688 #define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
689 #define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
691 /*defines for the Location field */
692 #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
693 #define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02)
694 #define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04)
695 #define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08)
696 #define MPI2_MANPAGE7_LOCATION_AUTO (0x10)
697 #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
698 #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
701 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
702 *one and check the value returned for NumPhys at runtime.
704 #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
705 #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
708 typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
709 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
710 U32 Reserved1; /*0x04 */
711 U32 Reserved2; /*0x08 */
713 U8 EnclosureName[16]; /*0x10 */
714 U8 NumPhys; /*0x20 */
715 U8 Reserved3; /*0x21 */
716 U16 Reserved4; /*0x22 */
717 MPI2_MANPAGE7_CONNECTOR_INFO
718 ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */
719 } MPI2_CONFIG_PAGE_MAN_7,
720 *PTR_MPI2_CONFIG_PAGE_MAN_7,
721 Mpi2ManufacturingPage7_t,
722 *pMpi2ManufacturingPage7_t;
724 #define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
726 /*defines for the Flags field */
727 #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
728 #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
732 *Generic structure to use for product-specific manufacturing pages
733 *(currently Manufacturing Page 8 through Manufacturing Page 31).
736 typedef struct _MPI2_CONFIG_PAGE_MAN_PS {
737 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
738 U32 ProductSpecificInfo;/*0x04 */
739 } MPI2_CONFIG_PAGE_MAN_PS,
740 *PTR_MPI2_CONFIG_PAGE_MAN_PS,
741 Mpi2ManufacturingPagePS_t,
742 *pMpi2ManufacturingPagePS_t;
744 #define MPI2_MANUFACTURING8_PAGEVERSION (0x00)
745 #define MPI2_MANUFACTURING9_PAGEVERSION (0x00)
746 #define MPI2_MANUFACTURING10_PAGEVERSION (0x00)
747 #define MPI2_MANUFACTURING11_PAGEVERSION (0x00)
748 #define MPI2_MANUFACTURING12_PAGEVERSION (0x00)
749 #define MPI2_MANUFACTURING13_PAGEVERSION (0x00)
750 #define MPI2_MANUFACTURING14_PAGEVERSION (0x00)
751 #define MPI2_MANUFACTURING15_PAGEVERSION (0x00)
752 #define MPI2_MANUFACTURING16_PAGEVERSION (0x00)
753 #define MPI2_MANUFACTURING17_PAGEVERSION (0x00)
754 #define MPI2_MANUFACTURING18_PAGEVERSION (0x00)
755 #define MPI2_MANUFACTURING19_PAGEVERSION (0x00)
756 #define MPI2_MANUFACTURING20_PAGEVERSION (0x00)
757 #define MPI2_MANUFACTURING21_PAGEVERSION (0x00)
758 #define MPI2_MANUFACTURING22_PAGEVERSION (0x00)
759 #define MPI2_MANUFACTURING23_PAGEVERSION (0x00)
760 #define MPI2_MANUFACTURING24_PAGEVERSION (0x00)
761 #define MPI2_MANUFACTURING25_PAGEVERSION (0x00)
762 #define MPI2_MANUFACTURING26_PAGEVERSION (0x00)
763 #define MPI2_MANUFACTURING27_PAGEVERSION (0x00)
764 #define MPI2_MANUFACTURING28_PAGEVERSION (0x00)
765 #define MPI2_MANUFACTURING29_PAGEVERSION (0x00)
766 #define MPI2_MANUFACTURING30_PAGEVERSION (0x00)
767 #define MPI2_MANUFACTURING31_PAGEVERSION (0x00)
770 /****************************************************************************
771 * IO Unit Config Pages
772 ****************************************************************************/
776 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 {
777 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
778 U64 UniqueValue; /*0x04 */
779 MPI2_VERSION_UNION NvdataVersionDefault; /*0x08 */
780 MPI2_VERSION_UNION NvdataVersionPersistent; /*0x0A */
781 } MPI2_CONFIG_PAGE_IO_UNIT_0,
782 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
783 Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t;
785 #define MPI2_IOUNITPAGE0_PAGEVERSION (0x02)
790 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
791 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
793 } MPI2_CONFIG_PAGE_IO_UNIT_1,
794 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
795 Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t;
797 #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
799 /*IO Unit Page 1 Flags defines */
800 #define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
801 #define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)
802 #define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)
803 #define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
804 #define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
805 #define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9)
806 #define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
807 #define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
808 #define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400)
809 #define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
810 #define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040)
811 #define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
812 #define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
818 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
819 *one and check the value returned for GPIOCount at runtime.
821 #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
822 #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
825 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
826 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
827 U8 GPIOCount; /*0x04 */
828 U8 Reserved1; /*0x05 */
829 U16 Reserved2; /*0x06 */
831 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */
832 } MPI2_CONFIG_PAGE_IO_UNIT_3,
833 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
834 Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t;
836 #define MPI2_IOUNITPAGE3_PAGEVERSION (0x01)
838 /*defines for IO Unit Page 3 GPIOVal field */
839 #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC)
840 #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
841 #define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000)
842 #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
848 *Upper layer code (drivers, utilities, etc.) should leave this define set to
849 *one and check the value returned for NumDmaEngines at runtime.
851 #ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
852 #define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
855 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
856 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
858 RaidAcceleratorBufferBaseAddress; /*0x04 */
860 RaidAcceleratorBufferSize; /*0x0C */
862 RaidAcceleratorControlBaseAddress; /*0x14 */
863 U8 RAControlSize; /*0x1C */
864 U8 NumDmaEngines; /*0x1D */
865 U8 RAMinControlSize; /*0x1E */
866 U8 RAMaxControlSize; /*0x1F */
867 U32 Reserved1; /*0x20 */
868 U32 Reserved2; /*0x24 */
869 U32 Reserved3; /*0x28 */
871 DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */
872 } MPI2_CONFIG_PAGE_IO_UNIT_5,
873 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
874 Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t;
876 #define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
878 /*defines for IO Unit Page 5 DmaEngineCapabilities field */
879 #define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000)
880 #define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
882 #define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
883 #define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
884 #define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
885 #define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
890 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
891 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
893 U8 RAHostControlSize; /*0x06 */
894 U8 Reserved0; /*0x07 */
896 RaidAcceleratorHostControlBaseAddress; /*0x08 */
897 U32 Reserved1; /*0x10 */
898 U32 Reserved2; /*0x14 */
899 U32 Reserved3; /*0x18 */
900 } MPI2_CONFIG_PAGE_IO_UNIT_6,
901 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
902 Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t;
904 #define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
906 /*defines for IO Unit Page 6 Flags field */
907 #define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
912 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
913 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
914 U8 CurrentPowerMode; /*0x04 */
915 U8 PreviousPowerMode; /*0x05 */
916 U8 PCIeWidth; /*0x06 */
917 U8 PCIeSpeed; /*0x07 */
918 U32 ProcessorState; /*0x08 */
920 PowerManagementCapabilities; /*0x0C */
921 U16 IOCTemperature; /*0x10 */
923 IOCTemperatureUnits; /*0x12 */
924 U8 IOCSpeed; /*0x13 */
925 U16 BoardTemperature; /*0x14 */
927 BoardTemperatureUnits; /*0x16 */
928 U8 Reserved3; /*0x17 */
929 U32 Reserved4; /* 0x18 */
930 U32 Reserved5; /* 0x1C */
931 U32 Reserved6; /* 0x20 */
932 U32 Reserved7; /* 0x24 */
933 } MPI2_CONFIG_PAGE_IO_UNIT_7,
934 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
935 Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t;
937 #define MPI2_IOUNITPAGE7_PAGEVERSION (0x04)
939 /*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */
940 #define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0)
941 #define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00)
942 #define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40)
943 #define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80)
944 #define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0)
946 #define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07)
947 #define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00)
948 #define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01)
949 #define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04)
950 #define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05)
951 #define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06)
954 /*defines for IO Unit Page 7 PCIeWidth field */
955 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
956 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
957 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
958 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
960 /*defines for IO Unit Page 7 PCIeSpeed field */
961 #define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
962 #define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
963 #define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
965 /*defines for IO Unit Page 7 ProcessorState field */
966 #define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
967 #define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
969 #define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
970 #define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
971 #define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
973 /*defines for IO Unit Page 7 PowerManagementCapabilities field */
974 #define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000)
975 #define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000)
976 #define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000)
977 #define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000)
978 #define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000)
979 #define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000)
980 #define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000)
981 #define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000)
982 #define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000)
983 #define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400)
984 #define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200)
985 #define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100)
986 #define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040)
987 #define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020)
988 #define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010)
989 #define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008)
990 #define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004)
991 #define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002)
992 #define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001)
994 /*obsolete names for the PowerManagementCapabilities bits (above) */
995 #define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
996 #define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
997 #define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
998 #define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /*obsolete */
999 #define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /*obsolete */
1002 /*defines for IO Unit Page 7 IOCTemperatureUnits field */
1003 #define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
1004 #define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
1005 #define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
1007 /*defines for IO Unit Page 7 IOCSpeed field */
1008 #define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
1009 #define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
1010 #define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
1011 #define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
1013 /*defines for IO Unit Page 7 BoardTemperatureUnits field */
1014 #define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00)
1015 #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
1016 #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
1021 #define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
1023 typedef struct _MPI2_IOUNIT8_SENSOR {
1024 U16 Flags; /*0x00 */
1025 U16 Reserved1; /*0x02 */
1027 Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */
1028 U32 Reserved2; /*0x0C */
1029 U32 Reserved3; /*0x10 */
1030 U32 Reserved4; /*0x14 */
1031 } MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR,
1032 Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t;
1034 /*defines for IO Unit Page 8 Sensor Flags field */
1035 #define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
1036 #define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
1037 #define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
1038 #define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
1041 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1042 *one and check the value returned for NumSensors at runtime.
1044 #ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
1045 #define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
1048 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
1049 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1050 U32 Reserved1; /*0x04 */
1051 U32 Reserved2; /*0x08 */
1052 U8 NumSensors; /*0x0C */
1053 U8 PollingInterval; /*0x0D */
1054 U16 Reserved3; /*0x0E */
1056 Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */
1057 } MPI2_CONFIG_PAGE_IO_UNIT_8,
1058 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
1059 Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t;
1061 #define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
1066 typedef struct _MPI2_IOUNIT9_SENSOR {
1067 U16 CurrentTemperature; /*0x00 */
1068 U16 Reserved1; /*0x02 */
1070 U8 Reserved2; /*0x05 */
1071 U16 Reserved3; /*0x06 */
1072 U32 Reserved4; /*0x08 */
1073 U32 Reserved5; /*0x0C */
1074 } MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR,
1075 Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t;
1077 /*defines for IO Unit Page 9 Sensor Flags field */
1078 #define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
1081 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1082 *one and check the value returned for NumSensors at runtime.
1084 #ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
1085 #define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
1088 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
1089 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1090 U32 Reserved1; /*0x04 */
1091 U32 Reserved2; /*0x08 */
1092 U8 NumSensors; /*0x0C */
1093 U8 Reserved4; /*0x0D */
1094 U16 Reserved3; /*0x0E */
1096 Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */
1097 } MPI2_CONFIG_PAGE_IO_UNIT_9,
1098 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
1099 Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t;
1101 #define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
1104 /*IO Unit Page 10 */
1106 typedef struct _MPI2_IOUNIT10_FUNCTION {
1107 U8 CreditPercent; /*0x00 */
1108 U8 Reserved1; /*0x01 */
1109 U16 Reserved2; /*0x02 */
1110 } MPI2_IOUNIT10_FUNCTION,
1111 *PTR_MPI2_IOUNIT10_FUNCTION,
1112 Mpi2IOUnit10Function_t,
1113 *pMpi2IOUnit10Function_t;
1116 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1117 *one and check the value returned for NumFunctions at runtime.
1119 #ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
1120 #define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
1123 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
1124 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1125 U8 NumFunctions; /*0x04 */
1126 U8 Reserved1; /*0x05 */
1127 U16 Reserved2; /*0x06 */
1128 U32 Reserved3; /*0x08 */
1129 U32 Reserved4; /*0x0C */
1130 MPI2_IOUNIT10_FUNCTION
1131 Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */
1132 } MPI2_CONFIG_PAGE_IO_UNIT_10,
1133 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
1134 Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t;
1136 #define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
1140 /****************************************************************************
1142 ****************************************************************************/
1146 typedef struct _MPI2_CONFIG_PAGE_IOC_0 {
1147 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1148 U32 Reserved1; /*0x04 */
1149 U32 Reserved2; /*0x08 */
1150 U16 VendorID; /*0x0C */
1151 U16 DeviceID; /*0x0E */
1152 U8 RevisionID; /*0x10 */
1153 U8 Reserved3; /*0x11 */
1154 U16 Reserved4; /*0x12 */
1155 U32 ClassCode; /*0x14 */
1156 U16 SubsystemVendorID; /*0x18 */
1157 U16 SubsystemID; /*0x1A */
1158 } MPI2_CONFIG_PAGE_IOC_0,
1159 *PTR_MPI2_CONFIG_PAGE_IOC_0,
1160 Mpi2IOCPage0_t, *pMpi2IOCPage0_t;
1162 #define MPI2_IOCPAGE0_PAGEVERSION (0x02)
1167 typedef struct _MPI2_CONFIG_PAGE_IOC_1 {
1168 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1169 U32 Flags; /*0x04 */
1170 U32 CoalescingTimeout; /*0x08 */
1171 U8 CoalescingDepth; /*0x0C */
1172 U8 PCISlotNum; /*0x0D */
1173 U8 PCIBusNum; /*0x0E */
1174 U8 PCIDomainSegment; /*0x0F */
1175 U32 Reserved1; /*0x10 */
1176 U32 Reserved2; /*0x14 */
1177 } MPI2_CONFIG_PAGE_IOC_1,
1178 *PTR_MPI2_CONFIG_PAGE_IOC_1,
1179 Mpi2IOCPage1_t, *pMpi2IOCPage1_t;
1181 #define MPI2_IOCPAGE1_PAGEVERSION (0x05)
1183 /*defines for IOC Page 1 Flags field */
1184 #define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001)
1186 #define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
1187 #define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF)
1188 #define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF)
1192 typedef struct _MPI2_CONFIG_PAGE_IOC_6 {
1193 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1195 CapabilitiesFlags; /*0x04 */
1196 U8 MaxDrivesRAID0; /*0x08 */
1197 U8 MaxDrivesRAID1; /*0x09 */
1199 MaxDrivesRAID1E; /*0x0A */
1201 MaxDrivesRAID10; /*0x0B */
1202 U8 MinDrivesRAID0; /*0x0C */
1203 U8 MinDrivesRAID1; /*0x0D */
1205 MinDrivesRAID1E; /*0x0E */
1207 MinDrivesRAID10; /*0x0F */
1208 U32 Reserved1; /*0x10 */
1210 MaxGlobalHotSpares; /*0x14 */
1211 U8 MaxPhysDisks; /*0x15 */
1212 U8 MaxVolumes; /*0x16 */
1213 U8 MaxConfigs; /*0x17 */
1214 U8 MaxOCEDisks; /*0x18 */
1215 U8 Reserved2; /*0x19 */
1216 U16 Reserved3; /*0x1A */
1218 SupportedStripeSizeMapRAID0; /*0x1C */
1220 SupportedStripeSizeMapRAID1E; /*0x20 */
1222 SupportedStripeSizeMapRAID10; /*0x24 */
1223 U32 Reserved4; /*0x28 */
1224 U32 Reserved5; /*0x2C */
1226 DefaultMetadataSize; /*0x30 */
1227 U16 Reserved6; /*0x32 */
1229 MaxBadBlockTableEntries; /*0x34 */
1230 U16 Reserved7; /*0x36 */
1232 IRNvsramVersion; /*0x38 */
1233 } MPI2_CONFIG_PAGE_IOC_6,
1234 *PTR_MPI2_CONFIG_PAGE_IOC_6,
1235 Mpi2IOCPage6_t, *pMpi2IOCPage6_t;
1237 #define MPI2_IOCPAGE6_PAGEVERSION (0x05)
1239 /*defines for IOC Page 6 CapabilitiesFlags */
1240 #define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020)
1241 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010)
1242 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008)
1243 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004)
1244 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002)
1245 #define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
1250 #define MPI2_IOCPAGE7_EVENTMASK_WORDS (4)
1252 typedef struct _MPI2_CONFIG_PAGE_IOC_7 {
1253 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1254 U32 Reserved1; /*0x04 */
1256 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */
1257 U16 SASBroadcastPrimitiveMasks; /*0x18 */
1258 U16 SASNotifyPrimitiveMasks; /*0x1A */
1259 U32 Reserved3; /*0x1C */
1260 } MPI2_CONFIG_PAGE_IOC_7,
1261 *PTR_MPI2_CONFIG_PAGE_IOC_7,
1262 Mpi2IOCPage7_t, *pMpi2IOCPage7_t;
1264 #define MPI2_IOCPAGE7_PAGEVERSION (0x02)
1269 typedef struct _MPI2_CONFIG_PAGE_IOC_8 {
1270 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1271 U8 NumDevsPerEnclosure; /*0x04 */
1272 U8 Reserved1; /*0x05 */
1273 U16 Reserved2; /*0x06 */
1274 U16 MaxPersistentEntries; /*0x08 */
1275 U16 MaxNumPhysicalMappedIDs; /*0x0A */
1276 U16 Flags; /*0x0C */
1277 U16 Reserved3; /*0x0E */
1278 U16 IRVolumeMappingFlags; /*0x10 */
1279 U16 Reserved4; /*0x12 */
1280 U32 Reserved5; /*0x14 */
1281 } MPI2_CONFIG_PAGE_IOC_8,
1282 *PTR_MPI2_CONFIG_PAGE_IOC_8,
1283 Mpi2IOCPage8_t, *pMpi2IOCPage8_t;
1285 #define MPI2_IOCPAGE8_PAGEVERSION (0x00)
1287 /*defines for IOC Page 8 Flags field */
1288 #define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020)
1289 #define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010)
1291 #define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E)
1292 #define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000)
1293 #define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002)
1295 #define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001)
1296 #define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000)
1298 /*defines for IOC Page 8 IRVolumeMappingFlags */
1299 #define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003)
1300 #define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000)
1301 #define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001)
1304 /****************************************************************************
1306 ****************************************************************************/
1310 typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
1311 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1312 U32 BiosOptions; /*0x04 */
1313 U32 IOCSettings; /*0x08 */
1314 U32 Reserved1; /*0x0C */
1315 U32 DeviceSettings; /*0x10 */
1316 U16 NumberOfDevices; /*0x14 */
1317 U16 UEFIVersion; /*0x16 */
1318 U16 IOTimeoutBlockDevicesNonRM; /*0x18 */
1319 U16 IOTimeoutSequential; /*0x1A */
1320 U16 IOTimeoutOther; /*0x1C */
1321 U16 IOTimeoutBlockDevicesRM; /*0x1E */
1322 } MPI2_CONFIG_PAGE_BIOS_1,
1323 *PTR_MPI2_CONFIG_PAGE_BIOS_1,
1324 Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
1326 #define MPI2_BIOSPAGE1_PAGEVERSION (0x05)
1328 /*values for BIOS Page 1 BiosOptions field */
1329 #define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
1330 #define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
1332 #define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
1333 #define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
1334 #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
1335 #define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004)
1337 #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
1339 /*values for BIOS Page 1 IOCSettings field */
1340 #define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
1341 #define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
1342 #define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
1344 #define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
1345 #define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
1346 #define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
1347 #define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
1349 #define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
1350 #define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
1351 #define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
1352 #define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
1353 #define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
1355 #define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
1357 /*values for BIOS Page 1 DeviceSettings field */
1358 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
1359 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
1360 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
1361 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
1362 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
1364 /*defines for BIOS Page 1 UEFIVersion field */
1365 #define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00)
1366 #define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8)
1367 #define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF)
1368 #define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0)
1374 typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER {
1375 U32 Reserved1; /*0x00 */
1376 U32 Reserved2; /*0x04 */
1377 U32 Reserved3; /*0x08 */
1378 U32 Reserved4; /*0x0C */
1379 U32 Reserved5; /*0x10 */
1380 U32 Reserved6; /*0x14 */
1381 } MPI2_BOOT_DEVICE_ADAPTER_ORDER,
1382 *PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
1383 Mpi2BootDeviceAdapterOrder_t,
1384 *pMpi2BootDeviceAdapterOrder_t;
1386 typedef struct _MPI2_BOOT_DEVICE_SAS_WWID {
1387 U64 SASAddress; /*0x00 */
1388 U8 LUN[8]; /*0x08 */
1389 U32 Reserved1; /*0x10 */
1390 U32 Reserved2; /*0x14 */
1391 } MPI2_BOOT_DEVICE_SAS_WWID,
1392 *PTR_MPI2_BOOT_DEVICE_SAS_WWID,
1393 Mpi2BootDeviceSasWwid_t,
1394 *pMpi2BootDeviceSasWwid_t;
1396 typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT {
1397 U64 EnclosureLogicalID; /*0x00 */
1398 U32 Reserved1; /*0x08 */
1399 U32 Reserved2; /*0x0C */
1400 U16 SlotNumber; /*0x10 */
1401 U16 Reserved3; /*0x12 */
1402 U32 Reserved4; /*0x14 */
1403 } MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
1404 *PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
1405 Mpi2BootDeviceEnclosureSlot_t,
1406 *pMpi2BootDeviceEnclosureSlot_t;
1408 typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME {
1409 U64 DeviceName; /*0x00 */
1410 U8 LUN[8]; /*0x08 */
1411 U32 Reserved1; /*0x10 */
1412 U32 Reserved2; /*0x14 */
1413 } MPI2_BOOT_DEVICE_DEVICE_NAME,
1414 *PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
1415 Mpi2BootDeviceDeviceName_t,
1416 *pMpi2BootDeviceDeviceName_t;
1418 typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE {
1419 MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder;
1420 MPI2_BOOT_DEVICE_SAS_WWID SasWwid;
1421 MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
1422 MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName;
1423 } MPI2_BIOSPAGE2_BOOT_DEVICE,
1424 *PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
1425 Mpi2BiosPage2BootDevice_t,
1426 *pMpi2BiosPage2BootDevice_t;
1428 typedef struct _MPI2_CONFIG_PAGE_BIOS_2 {
1429 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1430 U32 Reserved1; /*0x04 */
1431 U32 Reserved2; /*0x08 */
1432 U32 Reserved3; /*0x0C */
1433 U32 Reserved4; /*0x10 */
1434 U32 Reserved5; /*0x14 */
1435 U32 Reserved6; /*0x18 */
1436 U8 ReqBootDeviceForm; /*0x1C */
1437 U8 Reserved7; /*0x1D */
1438 U16 Reserved8; /*0x1E */
1439 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /*0x20 */
1440 U8 ReqAltBootDeviceForm; /*0x38 */
1441 U8 Reserved9; /*0x39 */
1442 U16 Reserved10; /*0x3A */
1443 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /*0x3C */
1444 U8 CurrentBootDeviceForm; /*0x58 */
1445 U8 Reserved11; /*0x59 */
1446 U16 Reserved12; /*0x5A */
1447 MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /*0x58 */
1448 } MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2,
1449 Mpi2BiosPage2_t, *pMpi2BiosPage2_t;
1451 #define MPI2_BIOSPAGE2_PAGEVERSION (0x04)
1453 /*values for BIOS Page 2 BootDeviceForm fields */
1454 #define MPI2_BIOSPAGE2_FORM_MASK (0x0F)
1455 #define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00)
1456 #define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05)
1457 #define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
1458 #define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07)
1463 typedef struct _MPI2_ADAPTER_INFO {
1464 U8 PciBusNumber; /*0x00 */
1465 U8 PciDeviceAndFunctionNumber; /*0x01 */
1466 U16 AdapterFlags; /*0x02 */
1467 } MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO,
1468 Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t;
1470 #define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
1471 #define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
1473 typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
1474 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1475 U32 GlobalFlags; /*0x04 */
1476 U32 BiosVersion; /*0x08 */
1477 MPI2_ADAPTER_INFO AdapterOrder[4]; /*0x0C */
1478 U32 Reserved1; /*0x1C */
1479 } MPI2_CONFIG_PAGE_BIOS_3,
1480 *PTR_MPI2_CONFIG_PAGE_BIOS_3,
1481 Mpi2BiosPage3_t, *pMpi2BiosPage3_t;
1483 #define MPI2_BIOSPAGE3_PAGEVERSION (0x00)
1485 /*values for BIOS Page 3 GlobalFlags */
1486 #define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
1487 #define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004)
1488 #define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010)
1490 #define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
1491 #define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
1492 #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020)
1493 #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
1499 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1500 *one and check the value returned for NumPhys at runtime.
1502 #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
1503 #define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
1506 typedef struct _MPI2_BIOS4_ENTRY {
1507 U64 ReassignmentWWID; /*0x00 */
1508 U64 ReassignmentDeviceName; /*0x08 */
1509 } MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY,
1510 Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t;
1512 typedef struct _MPI2_CONFIG_PAGE_BIOS_4 {
1513 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1514 U8 NumPhys; /*0x04 */
1515 U8 Reserved1; /*0x05 */
1516 U16 Reserved2; /*0x06 */
1518 Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */
1519 } MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4,
1520 Mpi2BiosPage4_t, *pMpi2BiosPage4_t;
1522 #define MPI2_BIOSPAGE4_PAGEVERSION (0x01)
1525 /****************************************************************************
1526 * RAID Volume Config Pages
1527 ****************************************************************************/
1529 /*RAID Volume Page 0 */
1531 typedef struct _MPI2_RAIDVOL0_PHYS_DISK {
1532 U8 RAIDSetNum; /*0x00 */
1533 U8 PhysDiskMap; /*0x01 */
1534 U8 PhysDiskNum; /*0x02 */
1535 U8 Reserved; /*0x03 */
1536 } MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK,
1537 Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t;
1539 /*defines for the PhysDiskMap field */
1540 #define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
1541 #define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
1543 typedef struct _MPI2_RAIDVOL0_SETTINGS {
1544 U16 Settings; /*0x00 */
1545 U8 HotSparePool; /*0x01 */
1546 U8 Reserved; /*0x02 */
1547 } MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS,
1548 Mpi2RaidVol0Settings_t,
1549 *pMpi2RaidVol0Settings_t;
1551 /*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
1552 #define MPI2_RAID_HOT_SPARE_POOL_0 (0x01)
1553 #define MPI2_RAID_HOT_SPARE_POOL_1 (0x02)
1554 #define MPI2_RAID_HOT_SPARE_POOL_2 (0x04)
1555 #define MPI2_RAID_HOT_SPARE_POOL_3 (0x08)
1556 #define MPI2_RAID_HOT_SPARE_POOL_4 (0x10)
1557 #define MPI2_RAID_HOT_SPARE_POOL_5 (0x20)
1558 #define MPI2_RAID_HOT_SPARE_POOL_6 (0x40)
1559 #define MPI2_RAID_HOT_SPARE_POOL_7 (0x80)
1561 /*RAID Volume Page 0 VolumeSettings defines */
1562 #define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008)
1563 #define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
1565 #define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003)
1566 #define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000)
1567 #define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001)
1568 #define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002)
1571 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1572 *one and check the value returned for NumPhysDisks at runtime.
1574 #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
1575 #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
1578 typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 {
1579 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1580 U16 DevHandle; /*0x04 */
1581 U8 VolumeState; /*0x06 */
1582 U8 VolumeType; /*0x07 */
1583 U32 VolumeStatusFlags; /*0x08 */
1584 MPI2_RAIDVOL0_SETTINGS VolumeSettings; /*0x0C */
1585 U64 MaxLBA; /*0x10 */
1586 U32 StripeSize; /*0x18 */
1587 U16 BlockSize; /*0x1C */
1588 U16 Reserved1; /*0x1E */
1589 U8 SupportedPhysDisks;/*0x20 */
1590 U8 ResyncRate; /*0x21 */
1591 U16 DataScrubDuration; /*0x22 */
1592 U8 NumPhysDisks; /*0x24 */
1593 U8 Reserved2; /*0x25 */
1594 U8 Reserved3; /*0x26 */
1595 U8 InactiveStatus; /*0x27 */
1596 MPI2_RAIDVOL0_PHYS_DISK
1597 PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */
1598 } MPI2_CONFIG_PAGE_RAID_VOL_0,
1599 *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
1600 Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t;
1602 #define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A)
1604 /*values for RAID VolumeState */
1605 #define MPI2_RAID_VOL_STATE_MISSING (0x00)
1606 #define MPI2_RAID_VOL_STATE_FAILED (0x01)
1607 #define MPI2_RAID_VOL_STATE_INITIALIZING (0x02)
1608 #define MPI2_RAID_VOL_STATE_ONLINE (0x03)
1609 #define MPI2_RAID_VOL_STATE_DEGRADED (0x04)
1610 #define MPI2_RAID_VOL_STATE_OPTIMAL (0x05)
1612 /*values for RAID VolumeType */
1613 #define MPI2_RAID_VOL_TYPE_RAID0 (0x00)
1614 #define MPI2_RAID_VOL_TYPE_RAID1E (0x01)
1615 #define MPI2_RAID_VOL_TYPE_RAID1 (0x02)
1616 #define MPI2_RAID_VOL_TYPE_RAID10 (0x05)
1617 #define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF)
1619 /*values for RAID Volume Page 0 VolumeStatusFlags field */
1620 #define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000)
1621 #define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000)
1622 #define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000)
1623 #define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000)
1624 #define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000)
1625 #define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000)
1626 #define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000)
1627 #define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000)
1628 #define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000)
1629 #define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000)
1630 #define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080)
1631 #define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040)
1632 #define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020)
1633 #define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000)
1634 #define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010)
1635 #define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008)
1636 #define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004)
1637 #define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002)
1638 #define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001)
1640 /*values for RAID Volume Page 0 SupportedPhysDisks field */
1641 #define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08)
1642 #define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04)
1643 #define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02)
1644 #define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01)
1646 /*values for RAID Volume Page 0 InactiveStatus field */
1647 #define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
1648 #define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01)
1649 #define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02)
1650 #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
1651 #define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04)
1652 #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
1653 #define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06)
1656 /*RAID Volume Page 1 */
1658 typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 {
1659 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1660 U16 DevHandle; /*0x04 */
1661 U16 Reserved0; /*0x06 */
1662 U8 GUID[24]; /*0x08 */
1663 U8 Name[16]; /*0x20 */
1665 U32 Reserved1; /*0x38 */
1666 U32 Reserved2; /*0x3C */
1667 } MPI2_CONFIG_PAGE_RAID_VOL_1,
1668 *PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
1669 Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t;
1671 #define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03)
1674 /****************************************************************************
1675 * RAID Physical Disk Config Pages
1676 ****************************************************************************/
1678 /*RAID Physical Disk Page 0 */
1680 typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS {
1681 U16 Reserved1; /*0x00 */
1682 U8 HotSparePool; /*0x02 */
1683 U8 Reserved2; /*0x03 */
1684 } MPI2_RAIDPHYSDISK0_SETTINGS,
1685 *PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
1686 Mpi2RaidPhysDisk0Settings_t,
1687 *pMpi2RaidPhysDisk0Settings_t;
1689 /*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
1691 typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA {
1692 U8 VendorID[8]; /*0x00 */
1693 U8 ProductID[16]; /*0x08 */
1694 U8 ProductRevLevel[4]; /*0x18 */
1695 U8 SerialNum[32]; /*0x1C */
1696 } MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
1697 *PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
1698 Mpi2RaidPhysDisk0InquiryData_t,
1699 *pMpi2RaidPhysDisk0InquiryData_t;
1701 typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 {
1702 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1703 U16 DevHandle; /*0x04 */
1704 U8 Reserved1; /*0x06 */
1705 U8 PhysDiskNum; /*0x07 */
1706 MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /*0x08 */
1707 U32 Reserved2; /*0x0C */
1708 MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /*0x10 */
1709 U32 Reserved3; /*0x4C */
1710 U8 PhysDiskState; /*0x50 */
1711 U8 OfflineReason; /*0x51 */
1712 U8 IncompatibleReason; /*0x52 */
1713 U8 PhysDiskAttributes; /*0x53 */
1714 U32 PhysDiskStatusFlags;/*0x54 */
1715 U64 DeviceMaxLBA; /*0x58 */
1716 U64 HostMaxLBA; /*0x60 */
1717 U64 CoercedMaxLBA; /*0x68 */
1718 U16 BlockSize; /*0x70 */
1719 U16 Reserved5; /*0x72 */
1720 U32 Reserved6; /*0x74 */
1721 } MPI2_CONFIG_PAGE_RD_PDISK_0,
1722 *PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
1723 Mpi2RaidPhysDiskPage0_t,
1724 *pMpi2RaidPhysDiskPage0_t;
1726 #define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05)
1728 /*PhysDiskState defines */
1729 #define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00)
1730 #define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01)
1731 #define MPI2_RAID_PD_STATE_OFFLINE (0x02)
1732 #define MPI2_RAID_PD_STATE_ONLINE (0x03)
1733 #define MPI2_RAID_PD_STATE_HOT_SPARE (0x04)
1734 #define MPI2_RAID_PD_STATE_DEGRADED (0x05)
1735 #define MPI2_RAID_PD_STATE_REBUILDING (0x06)
1736 #define MPI2_RAID_PD_STATE_OPTIMAL (0x07)
1738 /*OfflineReason defines */
1739 #define MPI2_PHYSDISK0_ONLINE (0x00)
1740 #define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01)
1741 #define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03)
1742 #define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04)
1743 #define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05)
1744 #define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06)
1745 #define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF)
1747 /*IncompatibleReason defines */
1748 #define MPI2_PHYSDISK0_COMPATIBLE (0x00)
1749 #define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01)
1750 #define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02)
1751 #define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03)
1752 #define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04)
1753 #define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05)
1754 #define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06)
1755 #define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF)
1757 /*PhysDiskAttributes defines */
1758 #define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C)
1759 #define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08)
1760 #define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04)
1762 #define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03)
1763 #define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02)
1764 #define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01)
1766 /*PhysDiskStatusFlags defines */
1767 #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040)
1768 #define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020)
1769 #define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010)
1770 #define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000)
1771 #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
1772 #define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004)
1773 #define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002)
1774 #define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001)
1777 /*RAID Physical Disk Page 1 */
1780 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1781 *one and check the value returned for NumPhysDiskPaths at runtime.
1783 #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
1784 #define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
1787 typedef struct _MPI2_RAIDPHYSDISK1_PATH {
1788 U16 DevHandle; /*0x00 */
1789 U16 Reserved1; /*0x02 */
1791 U64 OwnerWWID; /*0x0C */
1792 U8 OwnerIdentifier; /*0x14 */
1793 U8 Reserved2; /*0x15 */
1794 U16 Flags; /*0x16 */
1795 } MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH,
1796 Mpi2RaidPhysDisk1Path_t,
1797 *pMpi2RaidPhysDisk1Path_t;
1799 /*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
1800 #define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004)
1801 #define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
1802 #define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
1804 typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
1805 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1806 U8 NumPhysDiskPaths; /*0x04 */
1807 U8 PhysDiskNum; /*0x05 */
1808 U16 Reserved1; /*0x06 */
1809 U32 Reserved2; /*0x08 */
1810 MPI2_RAIDPHYSDISK1_PATH
1811 PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */
1812 } MPI2_CONFIG_PAGE_RD_PDISK_1,
1813 *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
1814 Mpi2RaidPhysDiskPage1_t,
1815 *pMpi2RaidPhysDiskPage1_t;
1817 #define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02)
1820 /****************************************************************************
1821 * values for fields used by several types of SAS Config Pages
1822 ****************************************************************************/
1824 /*values for NegotiatedLinkRates fields */
1825 #define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0)
1826 #define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4)
1827 #define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
1828 /*link rates used for Negotiated Physical and Logical Link Rate */
1829 #define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
1830 #define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
1831 #define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
1832 #define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
1833 #define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
1834 #define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
1835 #define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
1836 #define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08)
1837 #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
1838 #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
1839 #define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B)
1842 /*values for AttachedPhyInfo fields */
1843 #define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
1844 #define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
1845 #define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
1847 #define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F)
1848 #define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
1849 #define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
1850 #define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
1851 #define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
1852 #define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
1853 #define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
1854 #define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
1855 #define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
1856 #define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
1859 /*values for PhyInfo fields */
1860 #define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
1862 #define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
1863 #define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27)
1864 #define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
1865 #define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
1866 #define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
1868 #define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
1869 #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
1870 #define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
1871 #define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000)
1872 #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000)
1873 #define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000)
1875 #define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000)
1876 #define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
1877 #define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
1878 #define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
1879 #define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
1880 #define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
1881 #define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
1882 #define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
1883 #define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
1884 #define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
1886 #define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000)
1887 #define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
1888 #define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
1889 #define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
1891 #define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00)
1892 #define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8)
1894 #define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0)
1895 #define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000)
1896 #define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010)
1897 #define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020)
1900 /*values for SAS ProgrammedLinkRate fields */
1901 #define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0)
1902 #define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
1903 #define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
1904 #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
1905 #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
1906 #define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
1907 #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
1908 #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
1909 #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
1910 #define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
1911 #define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
1912 #define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B)
1915 /*values for SAS HwLinkRate fields */
1916 #define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0)
1917 #define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
1918 #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
1919 #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
1920 #define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
1921 #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
1922 #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
1923 #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
1924 #define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
1925 #define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B)
1929 /****************************************************************************
1930 * SAS IO Unit Config Pages
1931 ****************************************************************************/
1933 /*SAS IO Unit Page 0 */
1935 typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA {
1937 U8 PortFlags; /*0x01 */
1938 U8 PhyFlags; /*0x02 */
1939 U8 NegotiatedLinkRate; /*0x03 */
1940 U32 ControllerPhyDeviceInfo;/*0x04 */
1941 U16 AttachedDevHandle; /*0x08 */
1942 U16 ControllerDevHandle; /*0x0A */
1943 U32 DiscoveryStatus; /*0x0C */
1944 U32 Reserved; /*0x10 */
1945 } MPI2_SAS_IO_UNIT0_PHY_DATA,
1946 *PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
1947 Mpi2SasIOUnit0PhyData_t,
1948 *pMpi2SasIOUnit0PhyData_t;
1951 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1952 *one and check the value returned for NumPhys at runtime.
1954 #ifndef MPI2_SAS_IOUNIT0_PHY_MAX
1955 #define MPI2_SAS_IOUNIT0_PHY_MAX (1)
1958 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 {
1959 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
1960 U32 Reserved1;/*0x08 */
1961 U8 NumPhys; /*0x0C */
1962 U8 Reserved2;/*0x0D */
1963 U16 Reserved3;/*0x0E */
1964 MPI2_SAS_IO_UNIT0_PHY_DATA
1965 PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */
1966 } MPI2_CONFIG_PAGE_SASIOUNIT_0,
1967 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
1968 Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t;
1970 #define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05)
1972 /*values for SAS IO Unit Page 0 PortFlags */
1973 #define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08)
1974 #define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
1976 /*values for SAS IO Unit Page 0 PhyFlags */
1977 #define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10)
1978 #define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
1980 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
1982 /*see mpi2_sas.h for values for
1983 *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
1985 /*values for SAS IO Unit Page 0 DiscoveryStatus */
1986 #define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
1987 #define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
1988 #define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000)
1989 #define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
1990 #define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000)
1991 #define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
1992 #define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
1993 #define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000)
1994 #define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
1995 #define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
1996 #define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400)
1997 #define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
1998 #define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100)
1999 #define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080)
2000 #define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040)
2001 #define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020)
2002 #define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010)
2003 #define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004)
2004 #define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002)
2005 #define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001)
2008 /*SAS IO Unit Page 1 */
2010 typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA {
2012 U8 PortFlags; /*0x01 */
2013 U8 PhyFlags; /*0x02 */
2014 U8 MaxMinLinkRate; /*0x03 */
2015 U32 ControllerPhyDeviceInfo; /*0x04 */
2016 U16 MaxTargetPortConnectTime; /*0x08 */
2017 U16 Reserved1; /*0x0A */
2018 } MPI2_SAS_IO_UNIT1_PHY_DATA,
2019 *PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
2020 Mpi2SasIOUnit1PhyData_t,
2021 *pMpi2SasIOUnit1PhyData_t;
2024 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2025 *one and check the value returned for NumPhys at runtime.
2027 #ifndef MPI2_SAS_IOUNIT1_PHY_MAX
2028 #define MPI2_SAS_IOUNIT1_PHY_MAX (1)
2031 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
2032 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2034 ControlFlags; /*0x08 */
2036 SASNarrowMaxQueueDepth; /*0x0A */
2038 AdditionalControlFlags; /*0x0C */
2040 SASWideMaxQueueDepth; /*0x0E */
2044 SATAMaxQDepth; /*0x11 */
2046 ReportDeviceMissingDelay; /*0x12 */
2048 IODeviceMissingDelay; /*0x13 */
2049 MPI2_SAS_IO_UNIT1_PHY_DATA
2050 PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */
2051 } MPI2_CONFIG_PAGE_SASIOUNIT_1,
2052 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
2053 Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t;
2055 #define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09)
2057 /*values for SAS IO Unit Page 1 ControlFlags */
2058 #define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
2059 #define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
2060 #define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
2061 #define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
2063 #define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
2064 #define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
2065 #define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0)
2066 #define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1)
2067 #define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2)
2069 #define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
2070 #define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
2071 #define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
2072 #define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
2073 #define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
2074 #define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
2075 #define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
2076 #define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
2078 /*values for SAS IO Unit Page 1 AdditionalControlFlags */
2079 #define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
2080 #define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
2081 #define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
2082 #define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
2083 #define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
2084 #define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
2085 #define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
2086 #define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
2088 /*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
2089 #define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
2090 #define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80)
2092 /*values for SAS IO Unit Page 1 PortFlags */
2093 #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
2095 /*values for SAS IO Unit Page 1 PhyFlags */
2096 #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
2097 #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
2099 /*values for SAS IO Unit Page 1 MaxMinLinkRate */
2100 #define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
2101 #define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
2102 #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
2103 #define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
2104 #define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0)
2105 #define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
2106 #define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
2107 #define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
2108 #define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
2109 #define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B)
2111 /*see mpi2_sas.h for values for
2112 *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
2115 /*SAS IO Unit Page 4 */
2117 typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP {
2118 U8 MaxTargetSpinup; /*0x00 */
2119 U8 SpinupDelay; /*0x01 */
2120 U8 SpinupFlags; /*0x02 */
2121 U8 Reserved1; /*0x03 */
2122 } MPI2_SAS_IOUNIT4_SPINUP_GROUP,
2123 *PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
2124 Mpi2SasIOUnit4SpinupGroup_t,
2125 *pMpi2SasIOUnit4SpinupGroup_t;
2126 /*defines for SAS IO Unit Page 4 SpinupFlags */
2127 #define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01)
2131 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2132 *one and check the value returned for NumPhys at runtime.
2134 #ifndef MPI2_SAS_IOUNIT4_PHY_MAX
2135 #define MPI2_SAS_IOUNIT4_PHY_MAX (4)
2138 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 {
2139 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;/*0x00 */
2140 MPI2_SAS_IOUNIT4_SPINUP_GROUP
2141 SpinupGroupParameters[4]; /*0x08 */
2143 Reserved1; /*0x18 */
2145 Reserved2; /*0x1C */
2147 Reserved3; /*0x20 */
2149 BootDeviceWaitTime; /*0x24 */
2151 Reserved4; /*0x25 */
2153 Reserved5; /*0x26 */
2157 PEInitialSpinupDelay; /*0x29 */
2159 PEReplyDelay; /*0x2A */
2163 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /*0x2C */
2164 } MPI2_CONFIG_PAGE_SASIOUNIT_4,
2165 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
2166 Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t;
2168 #define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02)
2170 /*defines for Flags field */
2171 #define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01)
2173 /*defines for PHY field */
2174 #define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
2177 /*SAS IO Unit Page 5 */
2179 typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
2180 U8 ControlFlags; /*0x00 */
2181 U8 PortWidthModGroup; /*0x01 */
2182 U16 InactivityTimerExponent; /*0x02 */
2183 U8 SATAPartialTimeout; /*0x04 */
2184 U8 Reserved2; /*0x05 */
2185 U8 SATASlumberTimeout; /*0x06 */
2186 U8 Reserved3; /*0x07 */
2187 U8 SASPartialTimeout; /*0x08 */
2188 U8 Reserved4; /*0x09 */
2189 U8 SASSlumberTimeout; /*0x0A */
2190 U8 Reserved5; /*0x0B */
2191 } MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
2192 *PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
2193 Mpi2SasIOUnit5PhyPmSettings_t,
2194 *pMpi2SasIOUnit5PhyPmSettings_t;
2196 /*defines for ControlFlags field */
2197 #define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
2198 #define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
2199 #define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
2200 #define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
2202 /*defines for PortWidthModeGroup field */
2203 #define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
2205 /*defines for InactivityTimerExponent field */
2206 #define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
2207 #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
2208 #define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
2209 #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
2210 #define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
2211 #define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
2212 #define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
2213 #define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
2215 #define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
2216 #define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
2217 #define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
2218 #define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
2219 #define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
2220 #define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
2221 #define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
2222 #define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
2225 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2226 *one and check the value returned for NumPhys at runtime.
2228 #ifndef MPI2_SAS_IOUNIT5_PHY_MAX
2229 #define MPI2_SAS_IOUNIT5_PHY_MAX (1)
2232 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
2233 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2234 U8 NumPhys; /*0x08 */
2235 U8 Reserved1;/*0x09 */
2236 U16 Reserved2;/*0x0A */
2237 U32 Reserved3;/*0x0C */
2238 MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS
2239 SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */
2240 } MPI2_CONFIG_PAGE_SASIOUNIT_5,
2241 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
2242 Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t;
2244 #define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
2247 /*SAS IO Unit Page 6 */
2249 typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
2250 U8 CurrentStatus; /*0x00 */
2251 U8 CurrentModulation; /*0x01 */
2252 U8 CurrentUtilization; /*0x02 */
2253 U8 Reserved1; /*0x03 */
2254 U32 Reserved2; /*0x04 */
2255 } MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
2256 *PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
2257 Mpi2SasIOUnit6PortWidthModGroupStatus_t,
2258 *pMpi2SasIOUnit6PortWidthModGroupStatus_t;
2260 /*defines for CurrentStatus field */
2261 #define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
2262 #define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
2263 #define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
2264 #define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
2265 #define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
2266 #define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
2267 #define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
2268 #define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
2270 /*defines for CurrentModulation field */
2271 #define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
2272 #define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
2273 #define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
2274 #define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
2277 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2278 *one and check the value returned for NumGroups at runtime.
2280 #ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
2281 #define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
2284 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
2285 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2286 U32 Reserved1; /*0x08 */
2287 U32 Reserved2; /*0x0C */
2288 U8 NumGroups; /*0x10 */
2289 U8 Reserved3; /*0x11 */
2290 U16 Reserved4; /*0x12 */
2291 MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
2292 PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */
2293 } MPI2_CONFIG_PAGE_SASIOUNIT_6,
2294 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
2295 Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t;
2297 #define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
2300 /*SAS IO Unit Page 7 */
2302 typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
2304 U8 Reserved1; /*0x01 */
2305 U16 Reserved2; /*0x02 */
2306 U8 Threshold75Pct; /*0x04 */
2307 U8 Threshold50Pct; /*0x05 */
2308 U8 Threshold25Pct; /*0x06 */
2309 U8 Reserved3; /*0x07 */
2310 } MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
2311 *PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
2312 Mpi2SasIOUnit7PortWidthModGroupSettings_t,
2313 *pMpi2SasIOUnit7PortWidthModGroupSettings_t;
2315 /*defines for Flags field */
2316 #define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
2320 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2321 *one and check the value returned for NumGroups at runtime.
2323 #ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
2324 #define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
2327 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
2328 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2329 U8 SamplingInterval; /*0x08 */
2330 U8 WindowLength; /*0x09 */
2331 U16 Reserved1; /*0x0A */
2332 U32 Reserved2; /*0x0C */
2333 U32 Reserved3; /*0x10 */
2334 U8 NumGroups; /*0x14 */
2335 U8 Reserved4; /*0x15 */
2336 U16 Reserved5; /*0x16 */
2337 MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
2338 PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */
2339 } MPI2_CONFIG_PAGE_SASIOUNIT_7,
2340 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
2341 Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t;
2343 #define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
2346 /*SAS IO Unit Page 8 */
2348 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
2349 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2352 Reserved1; /*0x08 */
2354 PowerManagementCapabilities; /*0x0C */
2356 TxRxSleepStatus; /*0x10 */
2358 Reserved2; /*0x11 */
2360 Reserved3; /*0x12 */
2361 } MPI2_CONFIG_PAGE_SASIOUNIT_8,
2362 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
2363 Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t;
2365 #define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
2367 /*defines for PowerManagementCapabilities field */
2368 #define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000)
2369 #define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
2370 #define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
2371 #define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
2372 #define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
2373 #define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010)
2374 #define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
2375 #define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
2376 #define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
2377 #define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
2379 /*defines for TxRxSleepStatus field */
2380 #define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00)
2381 #define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01)
2382 #define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02)
2383 #define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03)
2387 /*SAS IO Unit Page 16 */
2389 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
2390 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2393 TimeStamp; /*0x08 */
2395 Reserved1; /*0x10 */
2397 Reserved2; /*0x14 */
2399 FastPathPendedRequests; /*0x18 */
2401 FastPathUnPendedRequests; /*0x1C */
2403 FastPathHostRequestStarts; /*0x20 */
2405 FastPathFirmwareRequestStarts; /*0x24 */
2407 FastPathHostCompletions; /*0x28 */
2409 FastPathFirmwareCompletions; /*0x2C */
2411 NonFastPathRequestStarts; /*0x30 */
2413 NonFastPathHostCompletions; /*0x30 */
2414 } MPI2_CONFIG_PAGE_SASIOUNIT16,
2415 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
2416 Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t;
2418 #define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00)
2421 /****************************************************************************
2422 * SAS Expander Config Pages
2423 ****************************************************************************/
2425 /*SAS Expander Page 0 */
2427 typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 {
2428 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2431 PhysicalPort; /*0x08 */
2433 ReportGenLength; /*0x09 */
2435 EnclosureHandle; /*0x0A */
2437 SASAddress; /*0x0C */
2439 DiscoveryStatus; /*0x14 */
2441 DevHandle; /*0x18 */
2443 ParentDevHandle; /*0x1A */
2445 ExpanderChangeCount; /*0x1C */
2447 ExpanderRouteIndexes; /*0x1E */
2455 STPBusInactivityTimeLimit; /*0x24 */
2457 STPMaxConnectTimeLimit; /*0x26 */
2459 STP_SMP_NexusLossTime; /*0x28 */
2461 MaxNumRoutedSasAddresses; /*0x2A */
2463 ActiveZoneManagerSASAddress;/*0x2C */
2465 ZoneLockInactivityLimit; /*0x34 */
2467 Reserved1; /*0x36 */
2469 TimeToReducedFunc; /*0x38 */
2471 InitialTimeToReducedFunc; /*0x39 */
2473 MaxReducedFuncTime; /*0x3A */
2475 Reserved2; /*0x3B */
2476 } MPI2_CONFIG_PAGE_EXPANDER_0,
2477 *PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
2478 Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t;
2480 #define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
2482 /*values for SAS Expander Page 0 DiscoveryStatus field */
2483 #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
2484 #define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
2485 #define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000)
2486 #define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
2487 #define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000)
2488 #define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
2489 #define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
2490 #define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000)
2491 #define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
2492 #define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800)
2493 #define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400)
2494 #define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200)
2495 #define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100)
2496 #define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080)
2497 #define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040)
2498 #define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020)
2499 #define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010)
2500 #define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004)
2501 #define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002)
2502 #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
2504 /*values for SAS Expander Page 0 Flags field */
2505 #define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
2506 #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
2507 #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
2508 #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
2509 #define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
2510 #define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
2511 #define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
2512 #define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
2513 #define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
2514 #define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
2515 #define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
2518 /*SAS Expander Page 1 */
2520 typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 {
2521 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2524 PhysicalPort; /*0x08 */
2526 Reserved1; /*0x09 */
2528 Reserved2; /*0x0A */
2534 NumTableEntriesProgrammed; /*0x0E */
2536 ProgrammedLinkRate; /*0x10 */
2538 HwLinkRate; /*0x11 */
2540 AttachedDevHandle; /*0x12 */
2544 AttachedDeviceInfo; /*0x18 */
2546 ExpanderDevHandle; /*0x1C */
2548 ChangeCount; /*0x1E */
2550 NegotiatedLinkRate; /*0x1F */
2552 PhyIdentifier; /*0x20 */
2554 AttachedPhyIdentifier; /*0x21 */
2556 Reserved3; /*0x22 */
2558 DiscoveryInfo; /*0x23 */
2560 AttachedPhyInfo; /*0x24 */
2562 ZoneGroup; /*0x28 */
2564 SelfConfigStatus; /*0x29 */
2566 Reserved4; /*0x2A */
2567 } MPI2_CONFIG_PAGE_EXPANDER_1,
2568 *PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
2569 Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t;
2571 #define MPI2_SASEXPANDER1_PAGEVERSION (0x02)
2573 /*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
2575 /*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
2577 /*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
2579 /*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines
2580 *used for the AttachedDeviceInfo field */
2582 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
2584 /*values for SAS Expander Page 1 DiscoveryInfo field */
2585 #define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
2586 #define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
2587 #define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
2589 /*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
2592 /****************************************************************************
2593 * SAS Device Config Pages
2594 ****************************************************************************/
2596 /*SAS Device Page 0 */
2598 typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
2599 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2604 EnclosureHandle; /*0x0A */
2606 SASAddress; /*0x0C */
2608 ParentDevHandle; /*0x14 */
2612 AccessStatus; /*0x17 */
2614 DevHandle; /*0x18 */
2616 AttachedPhyIdentifier; /*0x1A */
2618 ZoneGroup; /*0x1B */
2620 DeviceInfo; /*0x1C */
2624 PhysicalPort; /*0x22 */
2626 MaxPortConnections; /*0x23 */
2628 DeviceName; /*0x24 */
2630 PortGroups; /*0x2C */
2634 ControlGroup; /*0x2E */
2636 Reserved1; /*0x2F */
2638 Reserved2; /*0x30 */
2640 Reserved3; /*0x34 */
2641 } MPI2_CONFIG_PAGE_SAS_DEV_0,
2642 *PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
2643 Mpi2SasDevicePage0_t,
2644 *pMpi2SasDevicePage0_t;
2646 #define MPI2_SASDEVICE0_PAGEVERSION (0x08)
2648 /*values for SAS Device Page 0 AccessStatus field */
2649 #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
2650 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
2651 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
2652 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
2653 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
2654 #define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05)
2655 #define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06)
2656 #define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07)
2657 /*specific values for SATA Init failures */
2658 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
2659 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
2660 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
2661 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
2662 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
2663 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
2664 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
2665 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
2666 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
2667 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
2668 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
2670 /*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
2672 /*values for SAS Device Page 0 Flags field */
2673 #define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
2674 #define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000)
2675 #define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000)
2676 #define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
2677 #define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
2678 #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
2679 #define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
2680 #define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
2681 #define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
2682 #define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
2683 #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
2684 #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
2685 #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
2686 #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
2689 /*SAS Device Page 1 */
2691 typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 {
2692 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2695 Reserved1; /*0x08 */
2697 SASAddress; /*0x0C */
2699 Reserved2; /*0x14 */
2701 DevHandle; /*0x18 */
2703 Reserved3; /*0x1A */
2705 InitialRegDeviceFIS[20];/*0x1C */
2706 } MPI2_CONFIG_PAGE_SAS_DEV_1,
2707 *PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
2708 Mpi2SasDevicePage1_t,
2709 *pMpi2SasDevicePage1_t;
2711 #define MPI2_SASDEVICE1_PAGEVERSION (0x01)
2714 /****************************************************************************
2715 * SAS PHY Config Pages
2716 ****************************************************************************/
2720 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 {
2721 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2724 OwnerDevHandle; /*0x08 */
2726 Reserved1; /*0x0A */
2728 AttachedDevHandle; /*0x0C */
2730 AttachedPhyIdentifier; /*0x0E */
2732 Reserved2; /*0x0F */
2734 AttachedPhyInfo; /*0x10 */
2736 ProgrammedLinkRate; /*0x14 */
2738 HwLinkRate; /*0x15 */
2740 ChangeCount; /*0x16 */
2746 NegotiatedLinkRate; /*0x1C */
2748 Reserved3; /*0x1D */
2750 Reserved4; /*0x1E */
2751 } MPI2_CONFIG_PAGE_SAS_PHY_0,
2752 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
2753 Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t;
2755 #define MPI2_SASPHY0_PAGEVERSION (0x03)
2757 /*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
2759 /*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
2761 /*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
2763 /*values for SAS PHY Page 0 Flags field */
2764 #define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
2766 /*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
2768 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
2773 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 {
2774 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2777 Reserved1; /*0x08 */
2779 InvalidDwordCount; /*0x0C */
2781 RunningDisparityErrorCount; /*0x10 */
2783 LossDwordSynchCount; /*0x14 */
2785 PhyResetProblemCount; /*0x18 */
2786 } MPI2_CONFIG_PAGE_SAS_PHY_1,
2787 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
2788 Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t;
2790 #define MPI2_SASPHY1_PAGEVERSION (0x01)
2795 typedef struct _MPI2_SASPHY2_PHY_EVENT {
2796 U8 PhyEventCode; /*0x00 */
2797 U8 Reserved1; /*0x01 */
2798 U16 Reserved2; /*0x02 */
2799 U32 PhyEventInfo; /*0x04 */
2800 } MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT,
2801 Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t;
2803 /*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
2807 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2808 *one and check the value returned for NumPhyEvents at runtime.
2810 #ifndef MPI2_SASPHY2_PHY_EVENT_MAX
2811 #define MPI2_SASPHY2_PHY_EVENT_MAX (1)
2814 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
2815 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2818 Reserved1; /*0x08 */
2820 NumPhyEvents; /*0x0C */
2822 Reserved2; /*0x0D */
2824 Reserved3; /*0x0E */
2825 MPI2_SASPHY2_PHY_EVENT
2826 PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */
2827 } MPI2_CONFIG_PAGE_SAS_PHY_2,
2828 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
2830 *pMpi2SasPhyPage2_t;
2832 #define MPI2_SASPHY2_PAGEVERSION (0x00)
2837 typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
2838 U8 PhyEventCode; /*0x00 */
2839 U8 Reserved1; /*0x01 */
2840 U16 Reserved2; /*0x02 */
2841 U8 CounterType; /*0x04 */
2842 U8 ThresholdWindow; /*0x05 */
2843 U8 TimeUnits; /*0x06 */
2844 U8 Reserved3; /*0x07 */
2845 U32 EventThreshold; /*0x08 */
2846 U16 ThresholdFlags; /*0x0C */
2847 U16 Reserved4; /*0x0E */
2848 } MPI2_SASPHY3_PHY_EVENT_CONFIG,
2849 *PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
2850 Mpi2SasPhy3PhyEventConfig_t,
2851 *pMpi2SasPhy3PhyEventConfig_t;
2853 /*values for PhyEventCode field */
2854 #define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
2855 #define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
2856 #define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
2857 #define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
2858 #define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
2859 #define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
2860 #define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
2861 #define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
2862 #define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
2863 #define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
2864 #define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
2865 #define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
2866 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
2867 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
2868 #define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
2869 #define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
2870 #define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
2871 #define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
2872 #define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
2873 #define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
2874 #define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
2875 #define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
2876 #define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
2877 #define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
2878 #define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
2879 #define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
2880 #define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
2881 #define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
2882 #define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
2883 #define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
2884 #define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
2885 #define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
2886 #define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
2887 #define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
2888 #define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
2889 #define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
2890 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
2892 /*values for the CounterType field */
2893 #define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
2894 #define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
2895 #define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
2897 /*values for the TimeUnits field */
2898 #define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
2899 #define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
2900 #define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
2901 #define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
2903 /*values for the ThresholdFlags field */
2904 #define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
2905 #define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
2908 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2909 *one and check the value returned for NumPhyEvents at runtime.
2911 #ifndef MPI2_SASPHY3_PHY_EVENT_MAX
2912 #define MPI2_SASPHY3_PHY_EVENT_MAX (1)
2915 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
2916 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2919 Reserved1; /*0x08 */
2921 NumPhyEvents; /*0x0C */
2923 Reserved2; /*0x0D */
2925 Reserved3; /*0x0E */
2926 MPI2_SASPHY3_PHY_EVENT_CONFIG
2927 PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */
2928 } MPI2_CONFIG_PAGE_SAS_PHY_3,
2929 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
2930 Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t;
2932 #define MPI2_SASPHY3_PAGEVERSION (0x00)
2937 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
2938 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2941 Reserved1; /*0x08 */
2943 Reserved2; /*0x0A */
2947 InitialFrame[28]; /*0x0C */
2948 } MPI2_CONFIG_PAGE_SAS_PHY_4,
2949 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
2950 Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t;
2952 #define MPI2_SASPHY4_PAGEVERSION (0x00)
2954 /*values for the Flags field */
2955 #define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02)
2956 #define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01)
2961 /****************************************************************************
2962 * SAS Port Config Pages
2963 ****************************************************************************/
2965 /*SAS Port Page 0 */
2967 typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 {
2968 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2971 PortNumber; /*0x08 */
2973 PhysicalPort; /*0x09 */
2975 PortWidth; /*0x0A */
2977 PhysicalPortWidth; /*0x0B */
2979 ZoneGroup; /*0x0C */
2981 Reserved1; /*0x0D */
2983 Reserved2; /*0x0E */
2985 SASAddress; /*0x10 */
2987 DeviceInfo; /*0x18 */
2989 Reserved3; /*0x1C */
2991 Reserved4; /*0x20 */
2992 } MPI2_CONFIG_PAGE_SAS_PORT_0,
2993 *PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
2994 Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t;
2996 #define MPI2_SASPORT0_PAGEVERSION (0x00)
2998 /*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
3001 /****************************************************************************
3002 * SAS Enclosure Config Pages
3003 ****************************************************************************/
3005 /*SAS Enclosure Page 0 */
3007 typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
3008 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3011 Reserved1; /*0x08 */
3013 EnclosureLogicalID; /*0x0C */
3017 EnclosureHandle; /*0x16 */
3021 StartSlot; /*0x1A */
3023 Reserved2; /*0x1C */
3025 SEPDevHandle; /*0x1E */
3027 Reserved3; /*0x20 */
3029 Reserved4; /*0x24 */
3030 } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
3031 *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
3032 Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
3034 #define MPI2_SASENCLOSURE0_PAGEVERSION (0x03)
3036 /*values for SAS Enclosure Page 0 Flags field */
3037 #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
3038 #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
3039 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
3040 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
3041 #define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
3042 #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
3043 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
3046 /****************************************************************************
3048 ****************************************************************************/
3053 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3054 *one and check the value returned for NumLogEntries at runtime.
3056 #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
3057 #define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
3060 #define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C)
3062 typedef struct _MPI2_LOG_0_ENTRY {
3063 U64 TimeStamp; /*0x00 */
3064 U32 Reserved1; /*0x08 */
3065 U16 LogSequence; /*0x0C */
3066 U16 LogEntryQualifier; /*0x0E */
3069 U16 Reserved2; /*0x12 */
3071 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */
3072 } MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY,
3073 Mpi2Log0Entry_t, *pMpi2Log0Entry_t;
3075 /*values for Log Page 0 LogEntry LogEntryQualifier field */
3076 #define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000)
3077 #define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001)
3078 #define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002)
3079 #define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000)
3080 #define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF)
3082 typedef struct _MPI2_CONFIG_PAGE_LOG_0 {
3083 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3084 U32 Reserved1; /*0x08 */
3085 U32 Reserved2; /*0x0C */
3086 U16 NumLogEntries;/*0x10 */
3087 U16 Reserved3; /*0x12 */
3089 LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */
3090 } MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0,
3091 Mpi2LogPage0_t, *pMpi2LogPage0_t;
3093 #define MPI2_LOG_0_PAGEVERSION (0x02)
3096 /****************************************************************************
3098 ****************************************************************************/
3103 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3104 *one and check the value returned for NumElements at runtime.
3106 #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
3107 #define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
3110 typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT {
3111 U16 ElementFlags; /*0x00 */
3112 U16 VolDevHandle; /*0x02 */
3113 U8 HotSparePool; /*0x04 */
3114 U8 PhysDiskNum; /*0x05 */
3115 U16 PhysDiskDevHandle; /*0x06 */
3116 } MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
3117 *PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
3118 Mpi2RaidConfig0ConfigElement_t,
3119 *pMpi2RaidConfig0ConfigElement_t;
3121 /*values for the ElementFlags field */
3122 #define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F)
3123 #define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000)
3124 #define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001)
3125 #define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002)
3126 #define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003)
3129 typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 {
3130 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3131 U8 NumHotSpares; /*0x08 */
3132 U8 NumPhysDisks; /*0x09 */
3133 U8 NumVolumes; /*0x0A */
3134 U8 ConfigNum; /*0x0B */
3135 U32 Flags; /*0x0C */
3136 U8 ConfigGUID[24]; /*0x10 */
3137 U32 Reserved1; /*0x28 */
3138 U8 NumElements; /*0x2C */
3139 U8 Reserved2; /*0x2D */
3140 U16 Reserved3; /*0x2E */
3141 MPI2_RAIDCONFIG0_CONFIG_ELEMENT
3142 ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */
3143 } MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
3144 *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
3145 Mpi2RaidConfigurationPage0_t,
3146 *pMpi2RaidConfigurationPage0_t;
3148 #define MPI2_RAIDCONFIG0_PAGEVERSION (0x00)
3150 /*values for RAID Configuration Page 0 Flags field */
3151 #define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001)
3154 /****************************************************************************
3155 * Driver Persistent Mapping Config Pages
3156 ****************************************************************************/
3158 /*Driver Persistent Mapping Page 0 */
3160 typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY {
3161 U64 PhysicalIdentifier; /*0x00 */
3162 U16 MappingInformation; /*0x08 */
3163 U16 DeviceIndex; /*0x0A */
3164 U32 PhysicalBitsMapping; /*0x0C */
3165 U32 Reserved1; /*0x10 */
3166 } MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
3167 *PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
3168 Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t;
3170 typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 {
3171 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3172 MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /*0x08 */
3173 } MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
3174 *PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
3175 Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t;
3177 #define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00)
3179 /*values for Driver Persistent Mapping Page 0 MappingInformation field */
3180 #define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0)
3181 #define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4)
3182 #define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
3185 /****************************************************************************
3186 * Ethernet Config Pages
3187 ****************************************************************************/
3189 /*Ethernet Page 0 */
3191 /*IP address (union of IPv4 and IPv6) */
3192 typedef union _MPI2_ETHERNET_IP_ADDR {
3195 } MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR,
3196 Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t;
3198 #define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
3200 typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
3201 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3202 U8 NumInterfaces; /*0x08 */
3203 U8 Reserved0; /*0x09 */
3204 U16 Reserved1; /*0x0A */
3205 U32 Status; /*0x0C */
3206 U8 MediaState; /*0x10 */
3207 U8 Reserved2; /*0x11 */
3208 U16 Reserved3; /*0x12 */
3209 U8 MacAddress[6]; /*0x14 */
3210 U8 Reserved4; /*0x1A */
3211 U8 Reserved5; /*0x1B */
3212 MPI2_ETHERNET_IP_ADDR IpAddress; /*0x1C */
3213 MPI2_ETHERNET_IP_ADDR SubnetMask; /*0x2C */
3214 MPI2_ETHERNET_IP_ADDR GatewayIpAddress;/*0x3C */
3215 MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /*0x4C */
3216 MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /*0x5C */
3217 MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /*0x6C */
3219 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
3220 } MPI2_CONFIG_PAGE_ETHERNET_0,
3221 *PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
3222 Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t;
3224 #define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
3226 /*values for Ethernet Page 0 Status field */
3227 #define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
3228 #define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
3229 #define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
3230 #define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
3231 #define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
3232 #define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
3233 #define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
3234 #define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
3235 #define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
3236 #define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
3237 #define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
3238 #define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
3240 /*values for Ethernet Page 0 MediaState field */
3241 #define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
3242 #define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
3243 #define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
3245 #define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
3246 #define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
3247 #define MPI2_ETHPG0_MS_10MBIT (0x01)
3248 #define MPI2_ETHPG0_MS_100MBIT (0x02)
3249 #define MPI2_ETHPG0_MS_1GBIT (0x03)
3252 /*Ethernet Page 1 */
3254 typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
3255 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3258 Reserved0; /*0x08 */
3262 MediaState; /*0x10 */
3264 Reserved1; /*0x11 */
3266 Reserved2; /*0x12 */
3268 MacAddress[6]; /*0x14 */
3270 Reserved3; /*0x1A */
3272 Reserved4; /*0x1B */
3273 MPI2_ETHERNET_IP_ADDR
3274 StaticIpAddress; /*0x1C */
3275 MPI2_ETHERNET_IP_ADDR
3276 StaticSubnetMask; /*0x2C */
3277 MPI2_ETHERNET_IP_ADDR
3278 StaticGatewayIpAddress; /*0x3C */
3279 MPI2_ETHERNET_IP_ADDR
3280 StaticDNS1IpAddress; /*0x4C */
3281 MPI2_ETHERNET_IP_ADDR
3282 StaticDNS2IpAddress; /*0x5C */
3284 Reserved5; /*0x6C */
3286 Reserved6; /*0x70 */
3288 Reserved7; /*0x74 */
3290 Reserved8; /*0x78 */
3292 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
3293 } MPI2_CONFIG_PAGE_ETHERNET_1,
3294 *PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
3295 Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t;
3297 #define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
3299 /*values for Ethernet Page 1 Flags field */
3300 #define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
3301 #define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
3302 #define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
3303 #define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
3304 #define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
3305 #define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
3306 #define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
3307 #define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
3308 #define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
3310 /*values for Ethernet Page 1 MediaState field */
3311 #define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
3312 #define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
3313 #define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
3315 #define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
3316 #define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
3317 #define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
3318 #define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
3319 #define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
3322 /****************************************************************************
3323 * Extended Manufacturing Config Pages
3324 ****************************************************************************/
3327 *Generic structure to use for product-specific extended manufacturing pages
3328 *(currently Extended Manufacturing Page 40 through Extended Manufacturing
3332 typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
3333 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3336 ProductSpecificInfo; /*0x08 */
3337 } MPI2_CONFIG_PAGE_EXT_MAN_PS,
3338 *PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
3339 Mpi2ExtManufacturingPagePS_t,
3340 *pMpi2ExtManufacturingPagePS_t;
3342 /*PageVersion should be provided by product-specific code */
Code Review / kvmfornfv.git / blob