Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / scsi / libsas / sas_ata.c
1 /*
2  * Support for SATA devices on Serial Attached SCSI (SAS) controllers
3  *
4  * Copyright (C) 2006 IBM Corporation
5  *
6  * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of the
11  * License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
21  * USA
22  */
23
24 #include <linux/scatterlist.h>
25 #include <linux/slab.h>
26 #include <linux/async.h>
27 #include <linux/export.h>
28
29 #include <scsi/sas_ata.h>
30 #include "sas_internal.h"
31 #include <scsi/scsi_host.h>
32 #include <scsi/scsi_device.h>
33 #include <scsi/scsi_tcq.h>
34 #include <scsi/scsi.h>
35 #include <scsi/scsi_transport.h>
36 #include <scsi/scsi_transport_sas.h>
37 #include "../scsi_sas_internal.h"
38 #include "../scsi_transport_api.h"
39 #include <scsi/scsi_eh.h>
40
41 static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
42 {
43         /* Cheesy attempt to translate SAS errors into ATA.  Hah! */
44
45         /* transport error */
46         if (ts->resp == SAS_TASK_UNDELIVERED)
47                 return AC_ERR_ATA_BUS;
48
49         /* ts->resp == SAS_TASK_COMPLETE */
50         /* task delivered, what happened afterwards? */
51         switch (ts->stat) {
52                 case SAS_DEV_NO_RESPONSE:
53                         return AC_ERR_TIMEOUT;
54
55                 case SAS_INTERRUPTED:
56                 case SAS_PHY_DOWN:
57                 case SAS_NAK_R_ERR:
58                         return AC_ERR_ATA_BUS;
59
60
61                 case SAS_DATA_UNDERRUN:
62                         /*
63                          * Some programs that use the taskfile interface
64                          * (smartctl in particular) can cause underrun
65                          * problems.  Ignore these errors, perhaps at our
66                          * peril.
67                          */
68                         return 0;
69
70                 case SAS_DATA_OVERRUN:
71                 case SAS_QUEUE_FULL:
72                 case SAS_DEVICE_UNKNOWN:
73                 case SAS_SG_ERR:
74                         return AC_ERR_INVALID;
75
76                 case SAS_OPEN_TO:
77                 case SAS_OPEN_REJECT:
78                         SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
79                                     __func__, ts->stat);
80                         return AC_ERR_OTHER;
81
82                 case SAM_STAT_CHECK_CONDITION:
83                 case SAS_ABORTED_TASK:
84                         return AC_ERR_DEV;
85
86                 case SAS_PROTO_RESPONSE:
87                         /* This means the ending_fis has the error
88                          * value; return 0 here to collect it */
89                         return 0;
90                 default:
91                         return 0;
92         }
93 }
94
95 static void sas_ata_task_done(struct sas_task *task)
96 {
97         struct ata_queued_cmd *qc = task->uldd_task;
98         struct domain_device *dev = task->dev;
99         struct task_status_struct *stat = &task->task_status;
100         struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
101         struct sas_ha_struct *sas_ha = dev->port->ha;
102         enum ata_completion_errors ac;
103         unsigned long flags;
104         struct ata_link *link;
105         struct ata_port *ap;
106
107         spin_lock_irqsave(&dev->done_lock, flags);
108         if (test_bit(SAS_HA_FROZEN, &sas_ha->state))
109                 task = NULL;
110         else if (qc && qc->scsicmd)
111                 ASSIGN_SAS_TASK(qc->scsicmd, NULL);
112         spin_unlock_irqrestore(&dev->done_lock, flags);
113
114         /* check if libsas-eh got to the task before us */
115         if (unlikely(!task))
116                 return;
117
118         if (!qc)
119                 goto qc_already_gone;
120
121         ap = qc->ap;
122         link = &ap->link;
123
124         spin_lock_irqsave(ap->lock, flags);
125         /* check if we lost the race with libata/sas_ata_post_internal() */
126         if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) {
127                 spin_unlock_irqrestore(ap->lock, flags);
128                 if (qc->scsicmd)
129                         goto qc_already_gone;
130                 else {
131                         /* if eh is not involved and the port is frozen then the
132                          * ata internal abort process has taken responsibility
133                          * for this sas_task
134                          */
135                         return;
136                 }
137         }
138
139         if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
140             ((stat->stat == SAM_STAT_CHECK_CONDITION &&
141               dev->sata_dev.class == ATA_DEV_ATAPI))) {
142                 memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
143
144                 if (!link->sactive) {
145                         qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
146                 } else {
147                         link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
148                         if (unlikely(link->eh_info.err_mask))
149                                 qc->flags |= ATA_QCFLAG_FAILED;
150                 }
151         } else {
152                 ac = sas_to_ata_err(stat);
153                 if (ac) {
154                         SAS_DPRINTK("%s: SAS error %x\n", __func__,
155                                     stat->stat);
156                         /* We saw a SAS error. Send a vague error. */
157                         if (!link->sactive) {
158                                 qc->err_mask = ac;
159                         } else {
160                                 link->eh_info.err_mask |= AC_ERR_DEV;
161                                 qc->flags |= ATA_QCFLAG_FAILED;
162                         }
163
164                         dev->sata_dev.fis[3] = 0x04; /* status err */
165                         dev->sata_dev.fis[2] = ATA_ERR;
166                 }
167         }
168
169         qc->lldd_task = NULL;
170         ata_qc_complete(qc);
171         spin_unlock_irqrestore(ap->lock, flags);
172
173 qc_already_gone:
174         sas_free_task(task);
175 }
176
177 static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
178 {
179         unsigned long flags;
180         struct sas_task *task;
181         struct scatterlist *sg;
182         int ret = AC_ERR_SYSTEM;
183         unsigned int si, xfer = 0;
184         struct ata_port *ap = qc->ap;
185         struct domain_device *dev = ap->private_data;
186         struct sas_ha_struct *sas_ha = dev->port->ha;
187         struct Scsi_Host *host = sas_ha->core.shost;
188         struct sas_internal *i = to_sas_internal(host->transportt);
189
190         /* TODO: audit callers to ensure they are ready for qc_issue to
191          * unconditionally re-enable interrupts
192          */
193         local_irq_save_nort(flags);
194         spin_unlock(ap->lock);
195
196         /* If the device fell off, no sense in issuing commands */
197         if (test_bit(SAS_DEV_GONE, &dev->state))
198                 goto out;
199
200         task = sas_alloc_task(GFP_ATOMIC);
201         if (!task)
202                 goto out;
203         task->dev = dev;
204         task->task_proto = SAS_PROTOCOL_STP;
205         task->task_done = sas_ata_task_done;
206
207         if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
208             qc->tf.command == ATA_CMD_FPDMA_READ) {
209                 /* Need to zero out the tag libata assigned us */
210                 qc->tf.nsect = 0;
211         }
212
213         ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis);
214         task->uldd_task = qc;
215         if (ata_is_atapi(qc->tf.protocol)) {
216                 memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
217                 task->total_xfer_len = qc->nbytes;
218                 task->num_scatter = qc->n_elem;
219         } else {
220                 for_each_sg(qc->sg, sg, qc->n_elem, si)
221                         xfer += sg->length;
222
223                 task->total_xfer_len = xfer;
224                 task->num_scatter = si;
225         }
226
227         task->data_dir = qc->dma_dir;
228         task->scatter = qc->sg;
229         task->ata_task.retry_count = 1;
230         task->task_state_flags = SAS_TASK_STATE_PENDING;
231         qc->lldd_task = task;
232
233         switch (qc->tf.protocol) {
234         case ATA_PROT_NCQ:
235                 task->ata_task.use_ncq = 1;
236                 /* fall through */
237         case ATAPI_PROT_DMA:
238         case ATA_PROT_DMA:
239                 task->ata_task.dma_xfer = 1;
240                 break;
241         }
242
243         if (qc->scsicmd)
244                 ASSIGN_SAS_TASK(qc->scsicmd, task);
245
246         ret = i->dft->lldd_execute_task(task, GFP_ATOMIC);
247         if (ret) {
248                 SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
249
250                 if (qc->scsicmd)
251                         ASSIGN_SAS_TASK(qc->scsicmd, NULL);
252                 sas_free_task(task);
253                 ret = AC_ERR_SYSTEM;
254         }
255
256  out:
257         spin_lock(ap->lock);
258         local_irq_restore_nort(flags);
259         return ret;
260 }
261
262 static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc)
263 {
264         struct domain_device *dev = qc->ap->private_data;
265
266         ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
267         return true;
268 }
269
270 static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
271 {
272         return to_sas_internal(dev->port->ha->core.shost->transportt);
273 }
274
275 static int sas_get_ata_command_set(struct domain_device *dev);
276
277 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
278 {
279         if (phy->attached_tproto & SAS_PROTOCOL_STP)
280                 dev->tproto = phy->attached_tproto;
281         if (phy->attached_sata_dev)
282                 dev->tproto |= SAS_SATA_DEV;
283
284         if (phy->attached_dev_type == SAS_SATA_PENDING)
285                 dev->dev_type = SAS_SATA_PENDING;
286         else {
287                 int res;
288
289                 dev->dev_type = SAS_SATA_DEV;
290                 res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
291                                               &dev->sata_dev.rps_resp);
292                 if (res) {
293                         SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
294                                     "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
295                                     phy->phy_id, res);
296                         return res;
297                 }
298                 memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
299                        sizeof(struct dev_to_host_fis));
300                 dev->sata_dev.class = sas_get_ata_command_set(dev);
301         }
302         return 0;
303 }
304
305 static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
306 {
307         int res;
308
309         /* we weren't pending, so successfully end the reset sequence now */
310         if (dev->dev_type != SAS_SATA_PENDING)
311                 return 1;
312
313         /* hmmm, if this succeeds do we need to repost the domain_device to the
314          * lldd so it can pick up new parameters?
315          */
316         res = sas_get_ata_info(dev, phy);
317         if (res)
318                 return 0; /* retry */
319         else
320                 return 1;
321 }
322
323 static int smp_ata_check_ready(struct ata_link *link)
324 {
325         int res;
326         struct ata_port *ap = link->ap;
327         struct domain_device *dev = ap->private_data;
328         struct domain_device *ex_dev = dev->parent;
329         struct sas_phy *phy = sas_get_local_phy(dev);
330         struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number];
331
332         res = sas_ex_phy_discover(ex_dev, phy->number);
333         sas_put_local_phy(phy);
334
335         /* break the wait early if the expander is unreachable,
336          * otherwise keep polling
337          */
338         if (res == -ECOMM)
339                 return res;
340         if (res != SMP_RESP_FUNC_ACC)
341                 return 0;
342
343         switch (ex_phy->attached_dev_type) {
344         case SAS_SATA_PENDING:
345                 return 0;
346         case SAS_END_DEVICE:
347                 if (ex_phy->attached_sata_dev)
348                         return sas_ata_clear_pending(dev, ex_phy);
349         default:
350                 return -ENODEV;
351         }
352 }
353
354 static int local_ata_check_ready(struct ata_link *link)
355 {
356         struct ata_port *ap = link->ap;
357         struct domain_device *dev = ap->private_data;
358         struct sas_internal *i = dev_to_sas_internal(dev);
359
360         if (i->dft->lldd_ata_check_ready)
361                 return i->dft->lldd_ata_check_ready(dev);
362         else {
363                 /* lldd's that don't implement 'ready' checking get the
364                  * old default behavior of not coordinating reset
365                  * recovery with libata
366                  */
367                 return 1;
368         }
369 }
370
371 static int sas_ata_printk(const char *level, const struct domain_device *ddev,
372                           const char *fmt, ...)
373 {
374         struct ata_port *ap = ddev->sata_dev.ap;
375         struct device *dev = &ddev->rphy->dev;
376         struct va_format vaf;
377         va_list args;
378         int r;
379
380         va_start(args, fmt);
381
382         vaf.fmt = fmt;
383         vaf.va = &args;
384
385         r = printk("%ssas: ata%u: %s: %pV",
386                    level, ap->print_id, dev_name(dev), &vaf);
387
388         va_end(args);
389
390         return r;
391 }
392
393 static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
394                               unsigned long deadline)
395 {
396         int ret = 0, res;
397         struct sas_phy *phy;
398         struct ata_port *ap = link->ap;
399         int (*check_ready)(struct ata_link *link);
400         struct domain_device *dev = ap->private_data;
401         struct sas_internal *i = dev_to_sas_internal(dev);
402
403         res = i->dft->lldd_I_T_nexus_reset(dev);
404         if (res == -ENODEV)
405                 return res;
406
407         if (res != TMF_RESP_FUNC_COMPLETE)
408                 sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n");
409
410         phy = sas_get_local_phy(dev);
411         if (scsi_is_sas_phy_local(phy))
412                 check_ready = local_ata_check_ready;
413         else
414                 check_ready = smp_ata_check_ready;
415         sas_put_local_phy(phy);
416
417         ret = ata_wait_after_reset(link, deadline, check_ready);
418         if (ret && ret != -EAGAIN)
419                 sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret);
420
421         *class = dev->sata_dev.class;
422
423         ap->cbl = ATA_CBL_SATA;
424         return ret;
425 }
426
427 /*
428  * notify the lldd to forget the sas_task for this internal ata command
429  * that bypasses scsi-eh
430  */
431 static void sas_ata_internal_abort(struct sas_task *task)
432 {
433         struct sas_internal *si = dev_to_sas_internal(task->dev);
434         unsigned long flags;
435         int res;
436
437         spin_lock_irqsave(&task->task_state_lock, flags);
438         if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
439             task->task_state_flags & SAS_TASK_STATE_DONE) {
440                 spin_unlock_irqrestore(&task->task_state_lock, flags);
441                 SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
442                             task);
443                 goto out;
444         }
445         task->task_state_flags |= SAS_TASK_STATE_ABORTED;
446         spin_unlock_irqrestore(&task->task_state_lock, flags);
447
448         res = si->dft->lldd_abort_task(task);
449
450         spin_lock_irqsave(&task->task_state_lock, flags);
451         if (task->task_state_flags & SAS_TASK_STATE_DONE ||
452             res == TMF_RESP_FUNC_COMPLETE) {
453                 spin_unlock_irqrestore(&task->task_state_lock, flags);
454                 goto out;
455         }
456
457         /* XXX we are not prepared to deal with ->lldd_abort_task()
458          * failures.  TODO: lldds need to unconditionally forget about
459          * aborted ata tasks, otherwise we (likely) leak the sas task
460          * here
461          */
462         SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task);
463
464         if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
465                 task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
466         spin_unlock_irqrestore(&task->task_state_lock, flags);
467
468         return;
469  out:
470         sas_free_task(task);
471 }
472
473 static void sas_ata_post_internal(struct ata_queued_cmd *qc)
474 {
475         if (qc->flags & ATA_QCFLAG_FAILED)
476                 qc->err_mask |= AC_ERR_OTHER;
477
478         if (qc->err_mask) {
479                 /*
480                  * Find the sas_task and kill it.  By this point, libata
481                  * has decided to kill the qc and has frozen the port.
482                  * In this state sas_ata_task_done() will no longer free
483                  * the sas_task, so we need to notify the lldd (via
484                  * ->lldd_abort_task) that the task is dead and free it
485                  *  ourselves.
486                  */
487                 struct sas_task *task = qc->lldd_task;
488
489                 qc->lldd_task = NULL;
490                 if (!task)
491                         return;
492                 task->uldd_task = NULL;
493                 sas_ata_internal_abort(task);
494         }
495 }
496
497
498 static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev)
499 {
500         struct domain_device *dev = ap->private_data;
501         struct sas_internal *i = dev_to_sas_internal(dev);
502
503         if (i->dft->lldd_ata_set_dmamode)
504                 i->dft->lldd_ata_set_dmamode(dev);
505 }
506
507 static void sas_ata_sched_eh(struct ata_port *ap)
508 {
509         struct domain_device *dev = ap->private_data;
510         struct sas_ha_struct *ha = dev->port->ha;
511         unsigned long flags;
512
513         spin_lock_irqsave(&ha->lock, flags);
514         if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state))
515                 ha->eh_active++;
516         ata_std_sched_eh(ap);
517         spin_unlock_irqrestore(&ha->lock, flags);
518 }
519
520 void sas_ata_end_eh(struct ata_port *ap)
521 {
522         struct domain_device *dev = ap->private_data;
523         struct sas_ha_struct *ha = dev->port->ha;
524         unsigned long flags;
525
526         spin_lock_irqsave(&ha->lock, flags);
527         if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state))
528                 ha->eh_active--;
529         spin_unlock_irqrestore(&ha->lock, flags);
530 }
531
532 static struct ata_port_operations sas_sata_ops = {
533         .prereset               = ata_std_prereset,
534         .hardreset              = sas_ata_hard_reset,
535         .postreset              = ata_std_postreset,
536         .error_handler          = ata_std_error_handler,
537         .post_internal_cmd      = sas_ata_post_internal,
538         .qc_defer               = ata_std_qc_defer,
539         .qc_prep                = ata_noop_qc_prep,
540         .qc_issue               = sas_ata_qc_issue,
541         .qc_fill_rtf            = sas_ata_qc_fill_rtf,
542         .port_start             = ata_sas_port_start,
543         .port_stop              = ata_sas_port_stop,
544         .set_dmamode            = sas_ata_set_dmamode,
545         .sched_eh               = sas_ata_sched_eh,
546         .end_eh                 = sas_ata_end_eh,
547 };
548
549 static struct ata_port_info sata_port_info = {
550         .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ |
551                  ATA_FLAG_SAS_HOST,
552         .pio_mask = ATA_PIO4,
553         .mwdma_mask = ATA_MWDMA2,
554         .udma_mask = ATA_UDMA6,
555         .port_ops = &sas_sata_ops
556 };
557
558 int sas_ata_init(struct domain_device *found_dev)
559 {
560         struct sas_ha_struct *ha = found_dev->port->ha;
561         struct Scsi_Host *shost = ha->core.shost;
562         struct ata_port *ap;
563         int rc;
564
565         ata_host_init(&found_dev->sata_dev.ata_host, ha->dev, &sas_sata_ops);
566         ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host,
567                                 &sata_port_info,
568                                 shost);
569         if (!ap) {
570                 SAS_DPRINTK("ata_sas_port_alloc failed.\n");
571                 return -ENODEV;
572         }
573
574         ap->private_data = found_dev;
575         ap->cbl = ATA_CBL_SATA;
576         ap->scsi_host = shost;
577         rc = ata_sas_port_init(ap);
578         if (rc) {
579                 ata_sas_port_destroy(ap);
580                 return rc;
581         }
582         found_dev->sata_dev.ap = ap;
583
584         return 0;
585 }
586
587 void sas_ata_task_abort(struct sas_task *task)
588 {
589         struct ata_queued_cmd *qc = task->uldd_task;
590         struct completion *waiting;
591
592         /* Bounce SCSI-initiated commands to the SCSI EH */
593         if (qc->scsicmd) {
594                 struct request_queue *q = qc->scsicmd->device->request_queue;
595                 unsigned long flags;
596
597                 spin_lock_irqsave(q->queue_lock, flags);
598                 blk_abort_request(qc->scsicmd->request);
599                 spin_unlock_irqrestore(q->queue_lock, flags);
600                 return;
601         }
602
603         /* Internal command, fake a timeout and complete. */
604         qc->flags &= ~ATA_QCFLAG_ACTIVE;
605         qc->flags |= ATA_QCFLAG_FAILED;
606         qc->err_mask |= AC_ERR_TIMEOUT;
607         waiting = qc->private_data;
608         complete(waiting);
609 }
610
611 static int sas_get_ata_command_set(struct domain_device *dev)
612 {
613         struct dev_to_host_fis *fis =
614                 (struct dev_to_host_fis *) dev->frame_rcvd;
615         struct ata_taskfile tf;
616
617         if (dev->dev_type == SAS_SATA_PENDING)
618                 return ATA_DEV_UNKNOWN;
619
620         ata_tf_from_fis((const u8 *)fis, &tf);
621
622         return ata_dev_classify(&tf);
623 }
624
625 void sas_probe_sata(struct asd_sas_port *port)
626 {
627         struct domain_device *dev, *n;
628
629         mutex_lock(&port->ha->disco_mutex);
630         list_for_each_entry(dev, &port->disco_list, disco_list_node) {
631                 if (!dev_is_sata(dev))
632                         continue;
633
634                 ata_sas_async_probe(dev->sata_dev.ap);
635         }
636         mutex_unlock(&port->ha->disco_mutex);
637
638         list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) {
639                 if (!dev_is_sata(dev))
640                         continue;
641
642                 sas_ata_wait_eh(dev);
643
644                 /* if libata could not bring the link up, don't surface
645                  * the device
646                  */
647                 if (ata_dev_disabled(sas_to_ata_dev(dev)))
648                         sas_fail_probe(dev, __func__, -ENODEV);
649         }
650
651 }
652
653 static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
654 {
655         struct domain_device *dev, *n;
656
657         list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
658                 if (!dev_is_sata(dev))
659                         continue;
660
661                 sas_ata_wait_eh(dev);
662
663                 /* if libata failed to power manage the device, tear it down */
664                 if (ata_dev_disabled(sas_to_ata_dev(dev)))
665                         sas_fail_probe(dev, func, -ENODEV);
666         }
667 }
668
669 void sas_suspend_sata(struct asd_sas_port *port)
670 {
671         struct domain_device *dev;
672
673         mutex_lock(&port->ha->disco_mutex);
674         list_for_each_entry(dev, &port->dev_list, dev_list_node) {
675                 struct sata_device *sata;
676
677                 if (!dev_is_sata(dev))
678                         continue;
679
680                 sata = &dev->sata_dev;
681                 if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND)
682                         continue;
683
684                 ata_sas_port_suspend(sata->ap);
685         }
686         mutex_unlock(&port->ha->disco_mutex);
687
688         sas_ata_flush_pm_eh(port, __func__);
689 }
690
691 void sas_resume_sata(struct asd_sas_port *port)
692 {
693         struct domain_device *dev;
694
695         mutex_lock(&port->ha->disco_mutex);
696         list_for_each_entry(dev, &port->dev_list, dev_list_node) {
697                 struct sata_device *sata;
698
699                 if (!dev_is_sata(dev))
700                         continue;
701
702                 sata = &dev->sata_dev;
703                 if (sata->ap->pm_mesg.event == PM_EVENT_ON)
704                         continue;
705
706                 ata_sas_port_resume(sata->ap);
707         }
708         mutex_unlock(&port->ha->disco_mutex);
709
710         sas_ata_flush_pm_eh(port, __func__);
711 }
712
713 /**
714  * sas_discover_sata -- discover an STP/SATA domain device
715  * @dev: pointer to struct domain_device of interest
716  *
717  * Devices directly attached to a HA port, have no parents.  All other
718  * devices do, and should have their "parent" pointer set appropriately
719  * before calling this function.
720  */
721 int sas_discover_sata(struct domain_device *dev)
722 {
723         int res;
724
725         if (dev->dev_type == SAS_SATA_PM)
726                 return -ENODEV;
727
728         dev->sata_dev.class = sas_get_ata_command_set(dev);
729         sas_fill_in_rphy(dev, dev->rphy);
730
731         res = sas_notify_lldd_dev_found(dev);
732         if (res)
733                 return res;
734
735         sas_discover_event(dev->port, DISCE_PROBE);
736         return 0;
737 }
738
739 static void async_sas_ata_eh(void *data, async_cookie_t cookie)
740 {
741         struct domain_device *dev = data;
742         struct ata_port *ap = dev->sata_dev.ap;
743         struct sas_ha_struct *ha = dev->port->ha;
744
745         sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n");
746         ata_scsi_port_error_handler(ha->core.shost, ap);
747         sas_put_device(dev);
748 }
749
750 void sas_ata_strategy_handler(struct Scsi_Host *shost)
751 {
752         struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
753         ASYNC_DOMAIN_EXCLUSIVE(async);
754         int i;
755
756         /* it's ok to defer revalidation events during ata eh, these
757          * disks are in one of three states:
758          * 1/ present for initial domain discovery, and these
759          *    resets will cause bcn flutters
760          * 2/ hot removed, we'll discover that after eh fails
761          * 3/ hot added after initial discovery, lost the race, and need
762          *    to catch the next train.
763          */
764         sas_disable_revalidation(sas_ha);
765
766         spin_lock_irq(&sas_ha->phy_port_lock);
767         for (i = 0; i < sas_ha->num_phys; i++) {
768                 struct asd_sas_port *port = sas_ha->sas_port[i];
769                 struct domain_device *dev;
770
771                 spin_lock(&port->dev_list_lock);
772                 list_for_each_entry(dev, &port->dev_list, dev_list_node) {
773                         if (!dev_is_sata(dev))
774                                 continue;
775
776                         /* hold a reference over eh since we may be
777                          * racing with final remove once all commands
778                          * are completed
779                          */
780                         kref_get(&dev->kref);
781
782                         async_schedule_domain(async_sas_ata_eh, dev, &async);
783                 }
784                 spin_unlock(&port->dev_list_lock);
785         }
786         spin_unlock_irq(&sas_ha->phy_port_lock);
787
788         async_synchronize_full_domain(&async);
789
790         sas_enable_revalidation(sas_ha);
791 }
792
793 void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
794                 struct list_head *done_q)
795 {
796         struct scsi_cmnd *cmd, *n;
797         struct domain_device *eh_dev;
798
799         do {
800                 LIST_HEAD(sata_q);
801                 eh_dev = NULL;
802
803                 list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
804                         struct domain_device *ddev = cmd_to_domain_dev(cmd);
805
806                         if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd))
807                                 continue;
808                         if (eh_dev && eh_dev != ddev)
809                                 continue;
810                         eh_dev = ddev;
811                         list_move(&cmd->eh_entry, &sata_q);
812                 }
813
814                 if (!list_empty(&sata_q)) {
815                         struct ata_port *ap = eh_dev->sata_dev.ap;
816
817                         sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n");
818                         ata_scsi_cmd_error_handler(shost, ap, &sata_q);
819                         /*
820                          * ata's error handler may leave the cmd on the list
821                          * so make sure they don't remain on a stack list
822                          * about to go out of scope.
823                          *
824                          * This looks strange, since the commands are
825                          * now part of no list, but the next error
826                          * action will be ata_port_error_handler()
827                          * which takes no list and sweeps them up
828                          * anyway from the ata tag array.
829                          */
830                         while (!list_empty(&sata_q))
831                                 list_del_init(sata_q.next);
832                 }
833         } while (eh_dev);
834 }
835
836 void sas_ata_schedule_reset(struct domain_device *dev)
837 {
838         struct ata_eh_info *ehi;
839         struct ata_port *ap;
840         unsigned long flags;
841
842         if (!dev_is_sata(dev))
843                 return;
844
845         ap = dev->sata_dev.ap;
846         ehi = &ap->link.eh_info;
847
848         spin_lock_irqsave(ap->lock, flags);
849         ehi->err_mask |= AC_ERR_TIMEOUT;
850         ehi->action |= ATA_EH_RESET;
851         ata_port_schedule_eh(ap);
852         spin_unlock_irqrestore(ap->lock, flags);
853 }
854 EXPORT_SYMBOL_GPL(sas_ata_schedule_reset);
855
856 void sas_ata_wait_eh(struct domain_device *dev)
857 {
858         struct ata_port *ap;
859
860         if (!dev_is_sata(dev))
861                 return;
862
863         ap = dev->sata_dev.ap;
864         ata_port_wait_eh(ap);
865 }