Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / scsi / isci / port.h
1 /*
2  * This file is provided under a dual BSD/GPLv2 license.  When using or
3  * redistributing this file, you may do so under either license.
4  *
5  * GPL LICENSE SUMMARY
6  *
7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of version 2 of the GNU General Public License as
11  * published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21  * The full GNU General Public License is included in this distribution
22  * in the file called LICENSE.GPL.
23  *
24  * BSD LICENSE
25  *
26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27  * All rights reserved.
28  *
29  * Redistribution and use in source and binary forms, with or without
30  * modification, are permitted provided that the following conditions
31  * are met:
32  *
33  *   * Redistributions of source code must retain the above copyright
34  *     notice, this list of conditions and the following disclaimer.
35  *   * Redistributions in binary form must reproduce the above copyright
36  *     notice, this list of conditions and the following disclaimer in
37  *     the documentation and/or other materials provided with the
38  *     distribution.
39  *   * Neither the name of Intel Corporation nor the names of its
40  *     contributors may be used to endorse or promote products derived
41  *     from this software without specific prior written permission.
42  *
43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54  */
55
56 #ifndef _ISCI_PORT_H_
57 #define _ISCI_PORT_H_
58
59 #include <scsi/libsas.h>
60 #include "isci.h"
61 #include "sas.h"
62 #include "phy.h"
63
64 #define SCIC_SDS_DUMMY_PORT   0xFF
65
66 #define PF_NOTIFY (1 << 0)
67 #define PF_RESUME (1 << 1)
68
69 struct isci_phy;
70 struct isci_host;
71
72 enum isci_status {
73         isci_freed        = 0x00,
74         isci_starting     = 0x01,
75         isci_ready        = 0x02,
76         isci_ready_for_io = 0x03,
77         isci_stopping     = 0x04,
78         isci_stopped      = 0x05,
79 };
80
81 /**
82  * struct isci_port - isci direct attached sas port object
83  * @ready_exit: several states constitute 'ready'. When exiting ready we
84  *              need to take extra port-teardown actions that are
85  *              skipped when exiting to another 'ready' state.
86  * @logical_port_index: software port index
87  * @physical_port_index: hardware port index
88  * @active_phy_mask: identifies phy members
89  * @enabled_phy_mask: phy mask for the port
90  *                    that are already part of the port
91  * @reserved_tag:
92  * @reserved_rni: reserver for port task scheduler workaround
93  * @started_request_count: reference count for outstanding commands
94  * @not_ready_reason: set during state transitions and notified
95  * @timer: timeout start/stop operations
96  */
97 struct isci_port {
98         struct isci_host *isci_host;
99         struct list_head remote_dev_list;
100         #define IPORT_RESET_PENDING 0
101         unsigned long state;
102         enum sci_status hard_reset_status;
103         struct sci_base_state_machine sm;
104         bool ready_exit;
105         u8 logical_port_index;
106         u8 physical_port_index;
107         u8 active_phy_mask;
108         u8 enabled_phy_mask;
109         u8 last_active_phy;
110         u16 reserved_rni;
111         u16 reserved_tag;
112         u32 started_request_count;
113         u32 assigned_device_count;
114         u32 hang_detect_users;
115         u32 not_ready_reason;
116         struct isci_phy *phy_table[SCI_MAX_PHYS];
117         struct isci_host *owning_controller;
118         struct sci_timer timer;
119         struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers;
120         /* XXX rework: only one register, no need to replicate per-port */
121         u32 __iomem *port_pe_configuration_register;
122         struct scu_viit_entry __iomem *viit_registers;
123 };
124
125 enum sci_port_not_ready_reason_code {
126         SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
127         SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
128         SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
129         SCIC_PORT_NOT_READY_RECONFIGURING,
130
131         SCIC_PORT_NOT_READY_REASON_CODE_MAX
132 };
133
134 struct sci_port_end_point_properties {
135         struct sci_sas_address sas_address;
136         struct sci_phy_proto protocols;
137 };
138
139 struct sci_port_properties {
140         u32 index;
141         struct sci_port_end_point_properties local;
142         struct sci_port_end_point_properties remote;
143         u32 phy_mask;
144 };
145
146 /**
147  * enum sci_port_states - port state machine states
148  * @SCI_PORT_STOPPED: port has successfully been stopped.  In this state
149  *                    no new IO operations are permitted.  This state is
150  *                    entered from the STOPPING state.
151  * @SCI_PORT_STOPPING: port is in the process of stopping.  In this
152  *                     state no new IO operations are permitted, but
153  *                     existing IO operations are allowed to complete.
154  *                     This state is entered from the READY state.
155  * @SCI_PORT_READY: port is now ready.  Thus, the user is able to
156  *                  perform IO operations on this port. This state is
157  *                  entered from the STARTING state.
158  * @SCI_PORT_SUB_WAITING: port is started and ready but has no active
159  *                        phys.
160  * @SCI_PORT_SUB_OPERATIONAL: port is started and ready and there is at
161  *                            least one phy operational.
162  * @SCI_PORT_SUB_CONFIGURING: port is started and there was an
163  *                            add/remove phy event.  This state is only
164  *                            used in Automatic Port Configuration Mode
165  *                            (APC)
166  * @SCI_PORT_RESETTING: port is in the process of performing a hard
167  *                      reset.  Thus, the user is unable to perform IO
168  *                      operations on this port.  This state is entered
169  *                      from the READY state.
170  * @SCI_PORT_FAILED: port has failed a reset request.  This state is
171  *                   entered when a port reset request times out. This
172  *                   state is entered from the RESETTING state.
173  */
174 #define PORT_STATES {\
175         C(PORT_STOPPED),\
176         C(PORT_STOPPING),\
177         C(PORT_READY),\
178         C(PORT_SUB_WAITING),\
179         C(PORT_SUB_OPERATIONAL),\
180         C(PORT_SUB_CONFIGURING),\
181         C(PORT_RESETTING),\
182         C(PORT_FAILED),\
183         }
184 #undef C
185 #define C(a) SCI_##a
186 enum sci_port_states PORT_STATES;
187 #undef C
188
189 static inline void sci_port_decrement_request_count(struct isci_port *iport)
190 {
191         if (WARN_ONCE(iport->started_request_count == 0,
192                        "%s: tried to decrement started_request_count past 0!?",
193                         __func__))
194                 /* pass */;
195         else
196                 iport->started_request_count--;
197 }
198
199 #define sci_port_active_phy(port, phy) \
200         (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)
201
202 void sci_port_construct(
203         struct isci_port *iport,
204         u8 port_index,
205         struct isci_host *ihost);
206
207 enum sci_status sci_port_start(struct isci_port *iport);
208 enum sci_status sci_port_stop(struct isci_port *iport);
209
210 enum sci_status sci_port_add_phy(
211         struct isci_port *iport,
212         struct isci_phy *iphy);
213
214 enum sci_status sci_port_remove_phy(
215         struct isci_port *iport,
216         struct isci_phy *iphy);
217
218 void sci_port_setup_transports(
219         struct isci_port *iport,
220         u32 device_id);
221
222 void isci_port_bcn_enable(struct isci_host *, struct isci_port *);
223
224 void sci_port_deactivate_phy(
225         struct isci_port *iport,
226         struct isci_phy *iphy,
227         bool do_notify_user);
228
229 bool sci_port_link_detected(
230         struct isci_port *iport,
231         struct isci_phy *iphy);
232
233 enum sci_status sci_port_get_properties(
234         struct isci_port *iport,
235         struct sci_port_properties *prop);
236
237 enum sci_status sci_port_link_up(struct isci_port *iport,
238                                       struct isci_phy *iphy);
239 enum sci_status sci_port_link_down(struct isci_port *iport,
240                                         struct isci_phy *iphy);
241
242 struct isci_request;
243 struct isci_remote_device;
244 enum sci_status sci_port_start_io(
245         struct isci_port *iport,
246         struct isci_remote_device *idev,
247         struct isci_request *ireq);
248
249 enum sci_status sci_port_complete_io(
250         struct isci_port *iport,
251         struct isci_remote_device *idev,
252         struct isci_request *ireq);
253
254 enum sas_linkrate sci_port_get_max_allowed_speed(
255         struct isci_port *iport);
256
257 void sci_port_broadcast_change_received(
258         struct isci_port *iport,
259         struct isci_phy *iphy);
260
261 bool sci_port_is_valid_phy_assignment(
262         struct isci_port *iport,
263         u32 phy_index);
264
265 void sci_port_get_sas_address(
266         struct isci_port *iport,
267         struct sci_sas_address *sas_address);
268
269 void sci_port_get_attached_sas_address(
270         struct isci_port *iport,
271         struct sci_sas_address *sas_address);
272
273 void sci_port_set_hang_detection_timeout(
274         struct isci_port *isci_port,
275         u32 timeout);
276
277 void isci_port_formed(struct asd_sas_phy *);
278 void isci_port_deformed(struct asd_sas_phy *);
279
280 int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
281                                  struct isci_phy *iphy);
282 int isci_ata_check_ready(struct domain_device *dev);
283 #endif /* !defined(_ISCI_PORT_H_) */