Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / scsi / arm / acornscsi.h
1 /*
2  *  linux/drivers/acorn/scsi/acornscsi.h
3  *
4  *  Copyright (C) 1997 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  *  Acorn SCSI driver
11  */
12 #ifndef ACORNSCSI_H
13 #define ACORNSCSI_H
14
15 /* SBIC registers */
16 #define SBIC_OWNID              0
17 #define OWNID_FS1               (1<<7)
18 #define OWNID_FS2               (1<<6)
19 #define OWNID_EHP               (1<<4)
20 #define OWNID_EAF               (1<<3)
21
22 #define SBIC_CTRL               1
23 #define CTRL_DMAMODE            (1<<7)
24 #define CTRL_DMADBAMODE         (1<<6)
25 #define CTRL_DMABURST           (1<<5)
26 #define CTRL_DMAPOLLED          0
27 #define CTRL_HHP                (1<<4)
28 #define CTRL_EDI                (1<<3)
29 #define CTRL_IDI                (1<<2)
30 #define CTRL_HA                 (1<<1)
31 #define CTRL_HSP                (1<<0)
32
33 #define SBIC_TIMEOUT            2
34 #define SBIC_TOTSECTS           3
35 #define SBIC_TOTHEADS           4
36 #define SBIC_TOTCYLH            5
37 #define SBIC_TOTCYLL            6
38 #define SBIC_LOGADDRH           7
39 #define SBIC_LOGADDRM2          8
40 #define SBIC_LOGADDRM1          9
41 #define SBIC_LOGADDRL           10
42 #define SBIC_SECTORNUM          11
43 #define SBIC_HEADNUM            12
44 #define SBIC_CYLH               13
45 #define SBIC_CYLL               14
46 #define SBIC_TARGETLUN          15
47 #define TARGETLUN_TLV           (1<<7)
48 #define TARGETLUN_DOK           (1<<6)
49
50 #define SBIC_CMNDPHASE          16
51 #define SBIC_SYNCHTRANSFER      17
52 #define SYNCHTRANSFER_OF0       0x00
53 #define SYNCHTRANSFER_OF1       0x01
54 #define SYNCHTRANSFER_OF2       0x02
55 #define SYNCHTRANSFER_OF3       0x03
56 #define SYNCHTRANSFER_OF4       0x04
57 #define SYNCHTRANSFER_OF5       0x05
58 #define SYNCHTRANSFER_OF6       0x06
59 #define SYNCHTRANSFER_OF7       0x07
60 #define SYNCHTRANSFER_OF8       0x08
61 #define SYNCHTRANSFER_OF9       0x09
62 #define SYNCHTRANSFER_OF10      0x0A
63 #define SYNCHTRANSFER_OF11      0x0B
64 #define SYNCHTRANSFER_OF12      0x0C
65 #define SYNCHTRANSFER_8DBA      0x00
66 #define SYNCHTRANSFER_2DBA      0x20
67 #define SYNCHTRANSFER_3DBA      0x30
68 #define SYNCHTRANSFER_4DBA      0x40
69 #define SYNCHTRANSFER_5DBA      0x50
70 #define SYNCHTRANSFER_6DBA      0x60
71 #define SYNCHTRANSFER_7DBA      0x70
72
73 #define SBIC_TRANSCNTH          18
74 #define SBIC_TRANSCNTM          19
75 #define SBIC_TRANSCNTL          20
76 #define SBIC_DESTID             21
77 #define DESTID_SCC              (1<<7)
78 #define DESTID_DPD              (1<<6)
79
80 #define SBIC_SOURCEID           22
81 #define SOURCEID_ER             (1<<7)
82 #define SOURCEID_ES             (1<<6)
83 #define SOURCEID_DSP            (1<<5)
84 #define SOURCEID_SIV            (1<<4)
85
86 #define SBIC_SSR                23
87 #define SBIC_CMND               24
88 #define CMND_RESET              0x00
89 #define CMND_ABORT              0x01
90 #define CMND_ASSERTATN          0x02
91 #define CMND_NEGATEACK          0x03
92 #define CMND_DISCONNECT         0x04
93 #define CMND_RESELECT           0x05
94 #define CMND_SELWITHATN         0x06
95 #define CMND_SELECT             0x07
96 #define CMND_SELECTATNTRANSFER  0x08
97 #define CMND_SELECTTRANSFER     0x09
98 #define CMND_RESELECTRXDATA     0x0A
99 #define CMND_RESELECTTXDATA     0x0B
100 #define CMND_WAITFORSELRECV     0x0C
101 #define CMND_SENDSTATCMD        0x0D
102 #define CMND_SENDDISCONNECT     0x0E
103 #define CMND_SETIDI             0x0F
104 #define CMND_RECEIVECMD         0x10
105 #define CMND_RECEIVEDTA         0x11
106 #define CMND_RECEIVEMSG         0x12
107 #define CMND_RECEIVEUSP         0x13
108 #define CMND_SENDCMD            0x14
109 #define CMND_SENDDATA           0x15
110 #define CMND_SENDMSG            0x16
111 #define CMND_SENDUSP            0x17
112 #define CMND_TRANSLATEADDR      0x18
113 #define CMND_XFERINFO           0x20
114 #define CMND_SBT                (1<<7)
115
116 #define SBIC_DATA               25
117 #define SBIC_ASR                26
118 #define ASR_INT                 (1<<7)
119 #define ASR_LCI                 (1<<6)
120 #define ASR_BSY                 (1<<5)
121 #define ASR_CIP                 (1<<4)
122 #define ASR_PE                  (1<<1)
123 #define ASR_DBR                 (1<<0)
124
125 /* DMAC registers */
126 #define DMAC_INIT               0x00
127 #define INIT_8BIT               (1)
128
129 #define DMAC_CHANNEL            0x80
130 #define CHANNEL_0               0x00
131 #define CHANNEL_1               0x01
132 #define CHANNEL_2               0x02
133 #define CHANNEL_3               0x03
134
135 #define DMAC_TXCNTLO            0x01
136 #define DMAC_TXCNTHI            0x81
137 #define DMAC_TXADRLO            0x02
138 #define DMAC_TXADRMD            0x82
139 #define DMAC_TXADRHI            0x03
140
141 #define DMAC_DEVCON0            0x04
142 #define DEVCON0_AKL             (1<<7)
143 #define DEVCON0_RQL             (1<<6)
144 #define DEVCON0_EXW             (1<<5)
145 #define DEVCON0_ROT             (1<<4)
146 #define DEVCON0_CMP             (1<<3)
147 #define DEVCON0_DDMA            (1<<2)
148 #define DEVCON0_AHLD            (1<<1)
149 #define DEVCON0_MTM             (1<<0)
150
151 #define DMAC_DEVCON1            0x84
152 #define DEVCON1_WEV             (1<<1)
153 #define DEVCON1_BHLD            (1<<0)
154
155 #define DMAC_MODECON            0x05
156 #define MODECON_WOED            0x01
157 #define MODECON_VERIFY          0x00
158 #define MODECON_READ            0x04
159 #define MODECON_WRITE           0x08
160 #define MODECON_AUTOINIT        0x10
161 #define MODECON_ADDRDIR         0x20
162 #define MODECON_DEMAND          0x00
163 #define MODECON_SINGLE          0x40
164 #define MODECON_BLOCK           0x80
165 #define MODECON_CASCADE         0xC0
166
167 #define DMAC_STATUS             0x85
168 #define STATUS_TC0              (1<<0)
169 #define STATUS_RQ0              (1<<4)
170
171 #define DMAC_TEMPLO             0x06
172 #define DMAC_TEMPHI             0x86
173 #define DMAC_REQREG             0x07
174 #define DMAC_MASKREG            0x87
175 #define MASKREG_M0              0x01
176 #define MASKREG_M1              0x02
177 #define MASKREG_M2              0x04
178 #define MASKREG_M3              0x08
179
180 /* miscellaneous internal variables */
181
182 #define MASK_ON         (MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0)
183 #define MASK_OFF        (MASKREG_M3|MASKREG_M2|MASKREG_M1)
184
185 /*
186  * SCSI driver phases
187  */
188 typedef enum {
189     PHASE_IDLE,                                 /* we're not planning on doing anything  */
190     PHASE_CONNECTING,                           /* connecting to a target                */
191     PHASE_CONNECTED,                            /* connected to a target                 */
192     PHASE_MSGOUT,                               /* message out to device                 */
193     PHASE_RECONNECTED,                          /* reconnected                           */
194     PHASE_COMMANDPAUSED,                        /* command partly sent                   */
195     PHASE_COMMAND,                              /* command all sent                      */
196     PHASE_DATAOUT,                              /* data out to device                    */
197     PHASE_DATAIN,                               /* data in from device                   */
198     PHASE_STATUSIN,                             /* status in from device                 */
199     PHASE_MSGIN,                                /* message in from device                */
200     PHASE_DONE,                                 /* finished                              */
201     PHASE_ABORTED,                              /* aborted                               */
202     PHASE_DISCONNECT,                           /* disconnecting                         */
203 } phase_t;
204
205 /*
206  * After interrupt, what to do now
207  */
208 typedef enum {
209     INTR_IDLE,                                  /* not expecting another IRQ             */
210     INTR_NEXT_COMMAND,                          /* start next command                    */
211     INTR_PROCESSING,                            /* interrupt routine still processing    */
212 } intr_ret_t;
213
214 /*
215  * DMA direction
216  */
217 typedef enum {
218     DMA_OUT,                                    /* DMA from memory to chip              */
219     DMA_IN                                      /* DMA from chip to memory              */
220 } dmadir_t;
221
222 /*
223  * Synchronous transfer state
224  */
225 typedef enum {                                  /* Synchronous transfer state           */
226     SYNC_ASYNCHRONOUS,                          /* don't negotiate synchronous transfers*/
227     SYNC_NEGOCIATE,                             /* start negotiation                    */
228     SYNC_SENT_REQUEST,                          /* sent SDTR message                    */
229     SYNC_COMPLETED,                             /* received SDTR reply                  */
230 } syncxfer_t;
231
232 /*
233  * Command type
234  */
235 typedef enum {                                  /* command type                         */
236     CMD_READ,                                   /* READ_6, READ_10, READ_12             */
237     CMD_WRITE,                                  /* WRITE_6, WRITE_10, WRITE_12          */
238     CMD_MISC,                                   /* Others                               */
239 } cmdtype_t;
240
241 /*
242  * Data phase direction
243  */
244 typedef enum {                                  /* Data direction                       */
245     DATADIR_IN,                                 /* Data in phase expected               */
246     DATADIR_OUT                                 /* Data out phase expected              */
247 } datadir_t;
248
249 #include "queue.h"
250 #include "msgqueue.h"
251
252 #define STATUS_BUFFER_SIZE      32
253 /*
254  * This is used to dump the previous states of the SBIC
255  */
256 struct status_entry {
257         unsigned long   when;
258         unsigned char   ssr;
259         unsigned char   ph;
260         unsigned char   irq;
261         unsigned char   unused;
262 };
263
264 #define ADD_STATUS(_q,_ssr,_ph,_irq) \
265 ({                                                                      \
266         host->status[(_q)][host->status_ptr[(_q)]].when = jiffies;      \
267         host->status[(_q)][host->status_ptr[(_q)]].ssr  = (_ssr);       \
268         host->status[(_q)][host->status_ptr[(_q)]].ph   = (_ph);        \
269         host->status[(_q)][host->status_ptr[(_q)]].irq  = (_irq);       \
270         host->status_ptr[(_q)] = (host->status_ptr[(_q)] + 1) & (STATUS_BUFFER_SIZE - 1); \
271 })
272
273 /*
274  * AcornSCSI host specific data
275  */
276 typedef struct acornscsi_hostdata {
277     /* miscellaneous */
278     struct Scsi_Host    *host;                  /* host                                 */
279     struct scsi_cmnd    *SCpnt;                 /* currently processing command         */
280     struct scsi_cmnd    *origSCpnt;             /* original connecting command          */
281     void __iomem        *base;                  /* memc base address                    */
282     void __iomem        *fast;                  /* fast ioc base address                */
283
284     /* driver information */
285     struct {
286         unsigned int    irq;                    /* interrupt                            */
287         phase_t         phase;                  /* current phase                        */
288
289         struct {
290             unsigned char       target;         /* reconnected target                   */
291             unsigned char       lun;            /* reconnected lun                      */
292             unsigned char       tag;            /* reconnected tag                      */
293         } reconnected;
294
295         struct scsi_pointer     SCp;                    /* current commands data pointer        */
296
297         MsgQueue_t      msgs;
298
299         unsigned short  last_message;           /* last message to be sent              */
300         unsigned char   disconnectable:1;       /* this command can be disconnected     */
301     } scsi;
302
303     /* statistics information */
304     struct {
305         unsigned int    queues;
306         unsigned int    removes;
307         unsigned int    fins;
308         unsigned int    reads;
309         unsigned int    writes;
310         unsigned int    miscs;
311         unsigned int    disconnects;
312         unsigned int    aborts;
313         unsigned int    resets;
314     } stats;
315
316     /* queue handling */
317     struct {
318         Queue_t         issue;                  /* issue queue                          */
319         Queue_t         disconnected;           /* disconnected command queue           */
320     } queues;
321
322     /* per-device info */
323     struct {
324         unsigned char   sync_xfer;              /* synchronous transfer (SBIC value)    */
325         syncxfer_t      sync_state;             /* sync xfer negotiation state          */
326         unsigned char   disconnect_ok:1;        /* device can disconnect                */
327     } device[8];
328     unsigned long       busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy      */
329
330     /* DMA info */
331     struct {
332         unsigned int    free_addr;              /* next free address                    */
333         unsigned int    start_addr;             /* start address of current transfer    */
334         dmadir_t        direction;              /* dma direction                        */
335         unsigned int    transferred;            /* number of bytes transferred          */
336         unsigned int    xfer_start;             /* scheduled DMA transfer start         */
337         unsigned int    xfer_length;            /* scheduled DMA transfer length        */
338         char            *xfer_ptr;              /* pointer to area                      */
339         unsigned char   xfer_required:1;        /* set if we need to transfer something */
340         unsigned char   xfer_setup:1;           /* set if DMA is setup                  */
341         unsigned char   xfer_done:1;            /* set if DMA reached end of BH list    */
342     } dma;
343
344     /* card info */
345     struct {
346         unsigned char   page_reg;               /* current setting of page reg          */
347     } card;
348
349     unsigned char status_ptr[9];
350     struct status_entry status[9][STATUS_BUFFER_SIZE];
351 } AS_Host;
352
353 #endif /* ACORNSCSI_H */