kernel/drivers/scsi/aic7xxx/aic79xx_osm.c

   1 /*
   2  * Adaptec AIC79xx device driver for Linux.
   3  *
   4  * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
   5  *
   6  * --------------------------------------------------------------------------
   7  * Copyright (c) 1994-2000 Justin T. Gibbs.
   8  * Copyright (c) 1997-1999 Doug Ledford
   9  * Copyright (c) 2000-2003 Adaptec Inc.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include "aic79xx_osm.h"
  46 #include "aic79xx_inline.h"
  47 #include <scsi/scsicam.h>
  48
  49 static struct scsi_transport_template *ahd_linux_transport_template = NULL;
  50
  51 #include <linux/init.h>         /* __setup */
  52 #include <linux/mm.h>           /* For fetching system memory size */
  53 #include <linux/blkdev.h>               /* For block_size() */
  54 #include <linux/delay.h>        /* For ssleep/msleep */
  55 #include <linux/device.h>
  56 #include <linux/slab.h>
  57
  58 /*
  59  * Bucket size for counting good commands in between bad ones.
  60  */
  61 #define AHD_LINUX_ERR_THRESH    1000
  62
  63 /*
  64  * Set this to the delay in seconds after SCSI bus reset.
  65  * Note, we honor this only for the initial bus reset.
  66  * The scsi error recovery code performs its own bus settle
  67  * delay handling for error recovery actions.
  68  */
  69 #ifdef CONFIG_AIC79XX_RESET_DELAY_MS
  70 #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
  71 #else
  72 #define AIC79XX_RESET_DELAY 5000
  73 #endif
  74
  75 /*
  76  * To change the default number of tagged transactions allowed per-device,
  77  * add a line to the lilo.conf file like:
  78  * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
  79  * which will result in the first four devices on the first two
  80  * controllers being set to a tagged queue depth of 32.
  81  *
  82  * The tag_commands is an array of 16 to allow for wide and twin adapters.
  83  * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
  84  * for channel 1.
  85  */
  86 typedef struct {
  87         uint16_t tag_commands[16];      /* Allow for wide/twin adapters. */
  88 } adapter_tag_info_t;
  89
  90 /*
  91  * Modify this as you see fit for your system.
  92  *
  93  * 0                    tagged queuing disabled
  94  * 1 <= n <= 253        n == max tags ever dispatched.
  95  *
  96  * The driver will throttle the number of commands dispatched to a
  97  * device if it returns queue full.  For devices with a fixed maximum
  98  * queue depth, the driver will eventually determine this depth and
  99  * lock it in (a console message is printed to indicate that a lock
 100  * has occurred).  On some devices, queue full is returned for a temporary
 101  * resource shortage.  These devices will return queue full at varying
 102  * depths.  The driver will throttle back when the queue fulls occur and
 103  * attempt to slowly increase the depth over time as the device recovers
 104  * from the resource shortage.
 105  *
 106  * In this example, the first line will disable tagged queueing for all
 107  * the devices on the first probed aic79xx adapter.
 108  *
 109  * The second line enables tagged queueing with 4 commands/LUN for IDs
 110  * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
 111  * driver to attempt to use up to 64 tags for ID 1.
 112  *
 113  * The third line is the same as the first line.
 114  *
 115  * The fourth line disables tagged queueing for devices 0 and 3.  It
 116  * enables tagged queueing for the other IDs, with 16 commands/LUN
 117  * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
 118  * IDs 2, 5-7, and 9-15.
 119  */
 120
 121 /*
 122  * NOTE: The below structure is for reference only, the actual structure
 123  *       to modify in order to change things is just below this comment block.
 124 adapter_tag_info_t aic79xx_tag_info[] =
 125 {
 126         {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
 127         {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
 128         {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
 129         {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
 130 };
 131 */
 132
 133 #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
 134 #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
 135 #else
 136 #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
 137 #endif
 138
 139 #define AIC79XX_CONFIGED_TAG_COMMANDS {                                 \
 140         AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 141         AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 142         AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 143         AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 144         AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 145         AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 146         AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 147         AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE                \
 148 }
 149
 150 /*
 151  * By default, use the number of commands specified by
 152  * the users kernel configuration.
 153  */
 154 static adapter_tag_info_t aic79xx_tag_info[] =
 155 {
 156         {AIC79XX_CONFIGED_TAG_COMMANDS},
 157         {AIC79XX_CONFIGED_TAG_COMMANDS},
 158         {AIC79XX_CONFIGED_TAG_COMMANDS},
 159         {AIC79XX_CONFIGED_TAG_COMMANDS},
 160         {AIC79XX_CONFIGED_TAG_COMMANDS},
 161         {AIC79XX_CONFIGED_TAG_COMMANDS},
 162         {AIC79XX_CONFIGED_TAG_COMMANDS},
 163         {AIC79XX_CONFIGED_TAG_COMMANDS},
 164         {AIC79XX_CONFIGED_TAG_COMMANDS},
 165         {AIC79XX_CONFIGED_TAG_COMMANDS},
 166         {AIC79XX_CONFIGED_TAG_COMMANDS},
 167         {AIC79XX_CONFIGED_TAG_COMMANDS},
 168         {AIC79XX_CONFIGED_TAG_COMMANDS},
 169         {AIC79XX_CONFIGED_TAG_COMMANDS},
 170         {AIC79XX_CONFIGED_TAG_COMMANDS},
 171         {AIC79XX_CONFIGED_TAG_COMMANDS}
 172 };
 173
 174 /*
 175  * The I/O cell on the chip is very configurable in respect to its analog
 176  * characteristics.  Set the defaults here; they can be overriden with
 177  * the proper insmod parameters.
 178  */
 179 struct ahd_linux_iocell_opts
 180 {
 181         uint8_t precomp;
 182         uint8_t slewrate;
 183         uint8_t amplitude;
 184 };
 185 #define AIC79XX_DEFAULT_PRECOMP         0xFF
 186 #define AIC79XX_DEFAULT_SLEWRATE        0xFF
 187 #define AIC79XX_DEFAULT_AMPLITUDE       0xFF
 188 #define AIC79XX_DEFAULT_IOOPTS                  \
 189 {                                               \
 190         AIC79XX_DEFAULT_PRECOMP,                \
 191         AIC79XX_DEFAULT_SLEWRATE,               \
 192         AIC79XX_DEFAULT_AMPLITUDE               \
 193 }
 194 #define AIC79XX_PRECOMP_INDEX   0
 195 #define AIC79XX_SLEWRATE_INDEX  1
 196 #define AIC79XX_AMPLITUDE_INDEX 2
 197 static const struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
 198 {
 199         AIC79XX_DEFAULT_IOOPTS,
 200         AIC79XX_DEFAULT_IOOPTS,
 201         AIC79XX_DEFAULT_IOOPTS,
 202         AIC79XX_DEFAULT_IOOPTS,
 203         AIC79XX_DEFAULT_IOOPTS,
 204         AIC79XX_DEFAULT_IOOPTS,
 205         AIC79XX_DEFAULT_IOOPTS,
 206         AIC79XX_DEFAULT_IOOPTS,
 207         AIC79XX_DEFAULT_IOOPTS,
 208         AIC79XX_DEFAULT_IOOPTS,
 209         AIC79XX_DEFAULT_IOOPTS,
 210         AIC79XX_DEFAULT_IOOPTS,
 211         AIC79XX_DEFAULT_IOOPTS,
 212         AIC79XX_DEFAULT_IOOPTS,
 213         AIC79XX_DEFAULT_IOOPTS,
 214         AIC79XX_DEFAULT_IOOPTS
 215 };
 216
 217 /*
 218  * There should be a specific return value for this in scsi.h, but
 219  * it seems that most drivers ignore it.
 220  */
 221 #define DID_UNDERFLOW   DID_ERROR
 222
 223 void
 224 ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
 225 {
 226         printk("(scsi%d:%c:%d:%d): ",
 227                ahd->platform_data->host->host_no,
 228                scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
 229                scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
 230                scb != NULL ? SCB_GET_LUN(scb) : -1);
 231 }
 232
 233 /*
 234  * XXX - these options apply unilaterally to _all_ adapters
 235  *       cards in the system.  This should be fixed.  Exceptions to this
 236  *       rule are noted in the comments.
 237  */
 238
 239 /*
 240  * Skip the scsi bus reset.  Non 0 make us skip the reset at startup.  This
 241  * has no effect on any later resets that might occur due to things like
 242  * SCSI bus timeouts.
 243  */
 244 static uint32_t aic79xx_no_reset;
 245
 246 /*
 247  * Should we force EXTENDED translation on a controller.
 248  *     0 == Use whatever is in the SEEPROM or default to off
 249  *     1 == Use whatever is in the SEEPROM or default to on
 250  */
 251 static uint32_t aic79xx_extended;
 252
 253 /*
 254  * PCI bus parity checking of the Adaptec controllers.  This is somewhat
 255  * dubious at best.  To my knowledge, this option has never actually
 256  * solved a PCI parity problem, but on certain machines with broken PCI
 257  * chipset configurations, it can generate tons of false error messages.
 258  * It's included in the driver for completeness.
 259  *   0     = Shut off PCI parity check
 260  *   non-0 = Enable PCI parity check
 261  *
 262  * NOTE: you can't actually pass -1 on the lilo prompt.  So, to set this
 263  * variable to -1 you would actually want to simply pass the variable
 264  * name without a number.  That will invert the 0 which will result in
 265  * -1.
 266  */
 267 static uint32_t aic79xx_pci_parity = ~0;
 268
 269 /*
 270  * There are lots of broken chipsets in the world.  Some of them will
 271  * violate the PCI spec when we issue byte sized memory writes to our
 272  * controller.  I/O mapped register access, if allowed by the given
 273  * platform, will work in almost all cases.
 274  */
 275 uint32_t aic79xx_allow_memio = ~0;
 276
 277 /*
 278  * So that we can set how long each device is given as a selection timeout.
 279  * The table of values goes like this:
 280  *   0 - 256ms
 281  *   1 - 128ms
 282  *   2 - 64ms
 283  *   3 - 32ms
 284  * We default to 256ms because some older devices need a longer time
 285  * to respond to initial selection.
 286  */
 287 static uint32_t aic79xx_seltime;
 288
 289 /*
 290  * Certain devices do not perform any aging on commands.  Should the
 291  * device be saturated by commands in one portion of the disk, it is
 292  * possible for transactions on far away sectors to never be serviced.
 293  * To handle these devices, we can periodically send an ordered tag to
 294  * force all outstanding transactions to be serviced prior to a new
 295  * transaction.
 296  */
 297 static uint32_t aic79xx_periodic_otag;
 298
 299 /* Some storage boxes are using an LSI chip which has a bug making it
 300  * impossible to use aic79xx Rev B chip in 320 speeds.  The following
 301  * storage boxes have been reported to be buggy:
 302  * EonStor 3U 16-Bay: U16U-G3A3
 303  * EonStor 2U 12-Bay: U12U-G3A3
 304  * SentinelRAID: 2500F R5 / R6
 305  * SentinelRAID: 2500F R1
 306  * SentinelRAID: 2500F/1500F
 307  * SentinelRAID: 150F
 308  *
 309  * To get around this LSI bug, you can set your board to 160 mode
 310  * or you can enable the SLOWCRC bit.
 311  */
 312 uint32_t aic79xx_slowcrc;
 313
 314 /*
 315  * Module information and settable options.
 316  */
 317 static char *aic79xx = NULL;
 318
 319 MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
 320 MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver");
 321 MODULE_LICENSE("Dual BSD/GPL");
 322 MODULE_VERSION(AIC79XX_DRIVER_VERSION);
 323 module_param(aic79xx, charp, 0444);
 324 MODULE_PARM_DESC(aic79xx,
 325 "period-delimited options string:\n"
 326 "       verbose                 Enable verbose/diagnostic logging\n"
 327 "       allow_memio             Allow device registers to be memory mapped\n"
 328 "       debug                   Bitmask of debug values to enable\n"
 329 "       no_reset                Suppress initial bus resets\n"
 330 "       extended                Enable extended geometry on all controllers\n"
 331 "       periodic_otag           Send an ordered tagged transaction\n"
 332 "                               periodically to prevent tag starvation.\n"
 333 "                               This may be required by some older disk\n"
 334 "                               or drives/RAID arrays.\n"
 335 "       tag_info:<tag_str>      Set per-target tag depth\n"
 336 "       global_tag_depth:<int>  Global tag depth for all targets on all buses\n"
 337 "       slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
 338 "       precomp:<pcomp_list>    Set the signal precompensation (0-7).\n"
 339 "       amplitude:<int>         Set the signal amplitude (0-7).\n"
 340 "       seltime:<int>           Selection Timeout:\n"
 341 "                               (0/256ms,1/128ms,2/64ms,3/32ms)\n"
 342 "       slowcrc                 Turn on the SLOWCRC bit (Rev B only)\n"
 343 "\n"
 344 "       Sample modprobe configuration file:\n"
 345 "       #       Enable verbose logging\n"
 346 "       #       Set tag depth on Controller 2/Target 2 to 10 tags\n"
 347 "       #       Shorten the selection timeout to 128ms\n"
 348 "\n"
 349 "       options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
 350 );
 351
 352 static void ahd_linux_handle_scsi_status(struct ahd_softc *,
 353                                          struct scsi_device *,
 354                                          struct scb *);
 355 static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
 356                                          struct scsi_cmnd *cmd);
 357 static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
 358 static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
 359 static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
 360                                      struct ahd_devinfo *devinfo);
 361 static void ahd_linux_device_queue_depth(struct scsi_device *);
 362 static int ahd_linux_run_command(struct ahd_softc*,
 363                                  struct ahd_linux_device *,
 364                                  struct scsi_cmnd *);
 365 static void ahd_linux_setup_tag_info_global(char *p);
 366 static int  aic79xx_setup(char *c);
 367 static void ahd_freeze_simq(struct ahd_softc *ahd);
 368 static void ahd_release_simq(struct ahd_softc *ahd);
 369
 370 static int ahd_linux_unit;
 371
 372
 373 /************************** OS Utility Wrappers *******************************/
 374 void ahd_delay(long);
 375 void
 376 ahd_delay(long usec)
 377 {
 378         /*
 379          * udelay on Linux can have problems for
 380          * multi-millisecond waits.  Wait at most
 381          * 1024us per call.
 382          */
 383         while (usec > 0) {
 384                 udelay(usec % 1024);
 385                 usec -= 1024;
 386         }
 387 }
 388
 389
 390 /***************************** Low Level I/O **********************************/
 391 uint8_t ahd_inb(struct ahd_softc * ahd, long port);
 392 void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
 393 void ahd_outw_atomic(struct ahd_softc * ahd,
 394                                      long port, uint16_t val);
 395 void ahd_outsb(struct ahd_softc * ahd, long port,
 396                                uint8_t *, int count);
 397 void ahd_insb(struct ahd_softc * ahd, long port,
 398                                uint8_t *, int count);
 399
 400 uint8_t
 401 ahd_inb(struct ahd_softc * ahd, long port)
 402 {
 403         uint8_t x;
 404
 405         if (ahd->tags[0] == BUS_SPACE_MEMIO) {
 406                 x = readb(ahd->bshs[0].maddr + port);
 407         } else {
 408                 x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
 409         }
 410         mb();
 411         return (x);
 412 }
 413
 414 #if 0 /* unused */
 415 static uint16_t
 416 ahd_inw_atomic(struct ahd_softc * ahd, long port)
 417 {
 418         uint8_t x;
 419
 420         if (ahd->tags[0] == BUS_SPACE_MEMIO) {
 421                 x = readw(ahd->bshs[0].maddr + port);
 422         } else {
 423                 x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
 424         }
 425         mb();
 426         return (x);
 427 }
 428 #endif
 429
 430 void
 431 ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
 432 {
 433         if (ahd->tags[0] == BUS_SPACE_MEMIO) {
 434                 writeb(val, ahd->bshs[0].maddr + port);
 435         } else {
 436                 outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
 437         }
 438         mb();
 439 }
 440
 441 void
 442 ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
 443 {
 444         if (ahd->tags[0] == BUS_SPACE_MEMIO) {
 445                 writew(val, ahd->bshs[0].maddr + port);
 446         } else {
 447                 outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
 448         }
 449         mb();
 450 }
 451
 452 void
 453 ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
 454 {
 455         int i;
 456
 457         /*
 458          * There is probably a more efficient way to do this on Linux
 459          * but we don't use this for anything speed critical and this
 460          * should work.
 461          */
 462         for (i = 0; i < count; i++)
 463                 ahd_outb(ahd, port, *array++);
 464 }
 465
 466 void
 467 ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
 468 {
 469         int i;
 470
 471         /*
 472          * There is probably a more efficient way to do this on Linux
 473          * but we don't use this for anything speed critical and this
 474          * should work.
 475          */
 476         for (i = 0; i < count; i++)
 477                 *array++ = ahd_inb(ahd, port);
 478 }
 479
 480 /******************************* PCI Routines *********************************/
 481 uint32_t
 482 ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
 483 {
 484         switch (width) {
 485         case 1:
 486         {
 487                 uint8_t retval;
 488
 489                 pci_read_config_byte(pci, reg, &retval);
 490                 return (retval);
 491         }
 492         case 2:
 493         {
 494                 uint16_t retval;
 495                 pci_read_config_word(pci, reg, &retval);
 496                 return (retval);
 497         }
 498         case 4:
 499         {
 500                 uint32_t retval;
 501                 pci_read_config_dword(pci, reg, &retval);
 502                 return (retval);
 503         }
 504         default:
 505                 panic("ahd_pci_read_config: Read size too big");
 506                 /* NOTREACHED */
 507                 return (0);
 508         }
 509 }
 510
 511 void
 512 ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
 513 {
 514         switch (width) {
 515         case 1:
 516                 pci_write_config_byte(pci, reg, value);
 517                 break;
 518         case 2:
 519                 pci_write_config_word(pci, reg, value);
 520                 break;
 521         case 4:
 522                 pci_write_config_dword(pci, reg, value);
 523                 break;
 524         default:
 525                 panic("ahd_pci_write_config: Write size too big");
 526                 /* NOTREACHED */
 527         }
 528 }
 529
 530 /****************************** Inlines ***************************************/
 531 static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
 532
 533 static void
 534 ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
 535 {
 536         struct scsi_cmnd *cmd;
 537
 538         cmd = scb->io_ctx;
 539         ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
 540         scsi_dma_unmap(cmd);
 541 }
 542
 543 /******************************** Macros **************************************/
 544 #define BUILD_SCSIID(ahd, cmd)                                          \
 545         (((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id)
 546
 547 /*
 548  * Return a string describing the driver.
 549  */
 550 static const char *
 551 ahd_linux_info(struct Scsi_Host *host)
 552 {
 553         static char buffer[512];
 554         char    ahd_info[256];
 555         char   *bp;
 556         struct ahd_softc *ahd;
 557
 558         bp = &buffer[0];
 559         ahd = *(struct ahd_softc **)host->hostdata;
 560         memset(bp, 0, sizeof(buffer));
 561         strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION "\n"
 562                         "        <");
 563         strcat(bp, ahd->description);
 564         strcat(bp, ">\n"
 565                         "        ");
 566         ahd_controller_info(ahd, ahd_info);
 567         strcat(bp, ahd_info);
 568
 569         return (bp);
 570 }
 571
 572 /*
 573  * Queue an SCB to the controller.
 574  */
 575 static int
 576 ahd_linux_queue_lck(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 577 {
 578         struct   ahd_softc *ahd;
 579         struct   ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
 580         int rtn = SCSI_MLQUEUE_HOST_BUSY;
 581
 582         ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
 583
 584         cmd->scsi_done = scsi_done;
 585         cmd->result = CAM_REQ_INPROG << 16;
 586         rtn = ahd_linux_run_command(ahd, dev, cmd);
 587
 588         return rtn;
 589 }
 590
 591 static DEF_SCSI_QCMD(ahd_linux_queue)
 592
 593 static struct scsi_target **
 594 ahd_linux_target_in_softc(struct scsi_target *starget)
 595 {
 596         struct  ahd_softc *ahd =
 597                 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
 598         unsigned int target_offset;
 599
 600         target_offset = starget->id;
 601         if (starget->channel != 0)
 602                 target_offset += 8;
 603
 604         return &ahd->platform_data->starget[target_offset];
 605 }
 606
 607 static int
 608 ahd_linux_target_alloc(struct scsi_target *starget)
 609 {
 610         struct  ahd_softc *ahd =
 611                 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
 612         struct seeprom_config *sc = ahd->seep_config;
 613         unsigned long flags;
 614         struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
 615         struct ahd_devinfo devinfo;
 616         struct ahd_initiator_tinfo *tinfo;
 617         struct ahd_tmode_tstate *tstate;
 618         char channel = starget->channel + 'A';
 619
 620         ahd_lock(ahd, &flags);
 621
 622         BUG_ON(*ahd_targp != NULL);
 623
 624         *ahd_targp = starget;
 625
 626         if (sc) {
 627                 int flags = sc->device_flags[starget->id];
 628
 629                 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
 630                                             starget->id, &tstate);
 631
 632                 if ((flags  & CFPACKETIZED) == 0) {
 633                         /* don't negotiate packetized (IU) transfers */
 634                         spi_max_iu(starget) = 0;
 635                 } else {
 636                         if ((ahd->features & AHD_RTI) == 0)
 637                                 spi_rti(starget) = 0;
 638                 }
 639
 640                 if ((flags & CFQAS) == 0)
 641                         spi_max_qas(starget) = 0;
 642
 643                 /* Transinfo values have been set to BIOS settings */
 644                 spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
 645                 spi_min_period(starget) = tinfo->user.period;
 646                 spi_max_offset(starget) = tinfo->user.offset;
 647         }
 648
 649         tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
 650                                     starget->id, &tstate);
 651         ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
 652                             CAM_LUN_WILDCARD, channel,
 653                             ROLE_INITIATOR);
 654         ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
 655                          AHD_TRANS_GOAL, /*paused*/FALSE);
 656         ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
 657                       AHD_TRANS_GOAL, /*paused*/FALSE);
 658         ahd_unlock(ahd, &flags);
 659
 660         return 0;
 661 }
 662
 663 static void
 664 ahd_linux_target_destroy(struct scsi_target *starget)
 665 {
 666         struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
 667
 668         *ahd_targp = NULL;
 669 }
 670
 671 static int
 672 ahd_linux_slave_alloc(struct scsi_device *sdev)
 673 {
 674         struct  ahd_softc *ahd =
 675                 *((struct ahd_softc **)sdev->host->hostdata);
 676         struct ahd_linux_device *dev;
 677
 678         if (bootverbose)
 679                 printk("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
 680
 681         dev = scsi_transport_device_data(sdev);
 682         memset(dev, 0, sizeof(*dev));
 683
 684         /*
 685          * We start out life using untagged
 686          * transactions of which we allow one.
 687          */
 688         dev->openings = 1;
 689
 690         /*
 691          * Set maxtags to 0.  This will be changed if we
 692          * later determine that we are dealing with
 693          * a tagged queuing capable device.
 694          */
 695         dev->maxtags = 0;
 696
 697         return (0);
 698 }
 699
 700 static int
 701 ahd_linux_slave_configure(struct scsi_device *sdev)
 702 {
 703         struct  ahd_softc *ahd;
 704
 705         ahd = *((struct ahd_softc **)sdev->host->hostdata);
 706         if (bootverbose)
 707                 sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
 708
 709         ahd_linux_device_queue_depth(sdev);
 710
 711         /* Initial Domain Validation */
 712         if (!spi_initial_dv(sdev->sdev_target))
 713                 spi_dv_device(sdev);
 714
 715         return 0;
 716 }
 717
 718 #if defined(__i386__)
 719 /*
 720  * Return the disk geometry for the given SCSI device.
 721  */
 722 static int
 723 ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
 724                     sector_t capacity, int geom[])
 725 {
 726         uint8_t *bh;
 727         int      heads;
 728         int      sectors;
 729         int      cylinders;
 730         int      ret;
 731         int      extended;
 732         struct   ahd_softc *ahd;
 733
 734         ahd = *((struct ahd_softc **)sdev->host->hostdata);
 735
 736         bh = scsi_bios_ptable(bdev);
 737         if (bh) {
 738                 ret = scsi_partsize(bh, capacity,
 739                                     &geom[2], &geom[0], &geom[1]);
 740                 kfree(bh);
 741                 if (ret != -1)
 742                         return (ret);
 743         }
 744         heads = 64;
 745         sectors = 32;
 746         cylinders = aic_sector_div(capacity, heads, sectors);
 747
 748         if (aic79xx_extended != 0)
 749                 extended = 1;
 750         else
 751                 extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
 752         if (extended && cylinders >= 1024) {
 753                 heads = 255;
 754                 sectors = 63;
 755                 cylinders = aic_sector_div(capacity, heads, sectors);
 756         }
 757         geom[0] = heads;
 758         geom[1] = sectors;
 759         geom[2] = cylinders;
 760         return (0);
 761 }
 762 #endif
 763
 764 /*
 765  * Abort the current SCSI command(s).
 766  */
 767 static int
 768 ahd_linux_abort(struct scsi_cmnd *cmd)
 769 {
 770         int error;
 771
 772         error = ahd_linux_queue_abort_cmd(cmd);
 773
 774         return error;
 775 }
 776
 777 /*
 778  * Attempt to send a target reset message to the device that timed out.
 779  */
 780 static int
 781 ahd_linux_dev_reset(struct scsi_cmnd *cmd)
 782 {
 783         struct ahd_softc *ahd;
 784         struct ahd_linux_device *dev;
 785         struct scb *reset_scb;
 786         u_int  cdb_byte;
 787         int    retval = SUCCESS;
 788         int    paused;
 789         int    wait;
 790         struct  ahd_initiator_tinfo *tinfo;
 791         struct  ahd_tmode_tstate *tstate;
 792         unsigned long flags;
 793         DECLARE_COMPLETION_ONSTACK(done);
 794
 795         reset_scb = NULL;
 796         paused = FALSE;
 797         wait = FALSE;
 798         ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
 799
 800         scmd_printk(KERN_INFO, cmd,
 801                     "Attempting to queue a TARGET RESET message:");
 802
 803         printk("CDB:");
 804         for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
 805                 printk(" 0x%x", cmd->cmnd[cdb_byte]);
 806         printk("\n");
 807
 808         /*
 809          * Determine if we currently own this command.
 810          */
 811         dev = scsi_transport_device_data(cmd->device);
 812
 813         if (dev == NULL) {
 814                 /*
 815                  * No target device for this command exists,
 816                  * so we must not still own the command.
 817                  */
 818                 scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
 819                 return SUCCESS;
 820         }
 821
 822         /*
 823          * Generate us a new SCB
 824          */
 825         reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
 826         if (!reset_scb) {
 827                 scmd_printk(KERN_INFO, cmd, "No SCB available\n");
 828                 return FAILED;
 829         }
 830
 831         tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
 832                                     cmd->device->id, &tstate);
 833         reset_scb->io_ctx = cmd;
 834         reset_scb->platform_data->dev = dev;
 835         reset_scb->sg_count = 0;
 836         ahd_set_residual(reset_scb, 0);
 837         ahd_set_sense_residual(reset_scb, 0);
 838         reset_scb->platform_data->xfer_len = 0;
 839         reset_scb->hscb->control = 0;
 840         reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd);
 841         reset_scb->hscb->lun = cmd->device->lun;
 842         reset_scb->hscb->cdb_len = 0;
 843         reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
 844         reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
 845         if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
 846                 reset_scb->flags |= SCB_PACKETIZED;
 847         } else {
 848                 reset_scb->hscb->control |= MK_MESSAGE;
 849         }
 850         dev->openings--;
 851         dev->active++;
 852         dev->commands_issued++;
 853
 854         ahd_lock(ahd, &flags);
 855
 856         LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
 857         ahd_queue_scb(ahd, reset_scb);
 858
 859         ahd->platform_data->eh_done = &done;
 860         ahd_unlock(ahd, &flags);
 861
 862         printk("%s: Device reset code sleeping\n", ahd_name(ahd));
 863         if (!wait_for_completion_timeout(&done, 5 * HZ)) {
 864                 ahd_lock(ahd, &flags);
 865                 ahd->platform_data->eh_done = NULL;
 866                 ahd_unlock(ahd, &flags);
 867                 printk("%s: Device reset timer expired (active %d)\n",
 868                        ahd_name(ahd), dev->active);
 869                 retval = FAILED;
 870         }
 871         printk("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
 872
 873         return (retval);
 874 }
 875
 876 /*
 877  * Reset the SCSI bus.
 878  */
 879 static int
 880 ahd_linux_bus_reset(struct scsi_cmnd *cmd)
 881 {
 882         struct ahd_softc *ahd;
 883         int    found;
 884         unsigned long flags;
 885
 886         ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
 887 #ifdef AHD_DEBUG
 888         if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
 889                 printk("%s: Bus reset called for cmd %p\n",
 890                        ahd_name(ahd), cmd);
 891 #endif
 892         ahd_lock(ahd, &flags);
 893
 894         found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
 895                                   /*initiate reset*/TRUE);
 896         ahd_unlock(ahd, &flags);
 897
 898         if (bootverbose)
 899                 printk("%s: SCSI bus reset delivered. "
 900                        "%d SCBs aborted.\n", ahd_name(ahd), found);
 901
 902         return (SUCCESS);
 903 }
 904
 905 struct scsi_host_template aic79xx_driver_template = {
 906         .module                 = THIS_MODULE,
 907         .name                   = "aic79xx",
 908         .proc_name              = "aic79xx",
 909         .show_info              = ahd_linux_show_info,
 910         .write_info             = ahd_proc_write_seeprom,
 911         .info                   = ahd_linux_info,
 912         .queuecommand           = ahd_linux_queue,
 913         .eh_abort_handler       = ahd_linux_abort,
 914         .eh_device_reset_handler = ahd_linux_dev_reset,
 915         .eh_bus_reset_handler   = ahd_linux_bus_reset,
 916 #if defined(__i386__)
 917         .bios_param             = ahd_linux_biosparam,
 918 #endif
 919         .can_queue              = AHD_MAX_QUEUE,
 920         .this_id                = -1,
 921         .max_sectors            = 8192,
 922         .cmd_per_lun            = 2,
 923         .use_clustering         = ENABLE_CLUSTERING,
 924         .slave_alloc            = ahd_linux_slave_alloc,
 925         .slave_configure        = ahd_linux_slave_configure,
 926         .target_alloc           = ahd_linux_target_alloc,
 927         .target_destroy         = ahd_linux_target_destroy,
 928         .use_blk_tags           = 1,
 929 };
 930
 931 /******************************** Bus DMA *************************************/
 932 int
 933 ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
 934                    bus_size_t alignment, bus_size_t boundary,
 935                    dma_addr_t lowaddr, dma_addr_t highaddr,
 936                    bus_dma_filter_t *filter, void *filterarg,
 937                    bus_size_t maxsize, int nsegments,
 938                    bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
 939 {
 940         bus_dma_tag_t dmat;
 941
 942         dmat = kmalloc(sizeof(*dmat), GFP_ATOMIC);
 943         if (dmat == NULL)
 944                 return (ENOMEM);
 945
 946         /*
 947          * Linux is very simplistic about DMA memory.  For now don't
 948          * maintain all specification information.  Once Linux supplies
 949          * better facilities for doing these operations, or the
 950          * needs of this particular driver change, we might need to do
 951          * more here.
 952          */
 953         dmat->alignment = alignment;
 954         dmat->boundary = boundary;
 955         dmat->maxsize = maxsize;
 956         *ret_tag = dmat;
 957         return (0);
 958 }
 959
 960 void
 961 ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
 962 {
 963         kfree(dmat);
 964 }
 965
 966 int
 967 ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
 968                  int flags, bus_dmamap_t *mapp)
 969 {
 970         *vaddr = pci_alloc_consistent(ahd->dev_softc,
 971                                       dmat->maxsize, mapp);
 972         if (*vaddr == NULL)
 973                 return (ENOMEM);
 974         return(0);
 975 }
 976
 977 void
 978 ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
 979                 void* vaddr, bus_dmamap_t map)
 980 {
 981         pci_free_consistent(ahd->dev_softc, dmat->maxsize,
 982                             vaddr, map);
 983 }
 984
 985 int
 986 ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
 987                 void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
 988                 void *cb_arg, int flags)
 989 {
 990         /*
 991          * Assume for now that this will only be used during
 992          * initialization and not for per-transaction buffer mapping.
 993          */
 994         bus_dma_segment_t stack_sg;
 995
 996         stack_sg.ds_addr = map;
 997         stack_sg.ds_len = dmat->maxsize;
 998         cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
 999         return (0);
1000 }
1001
1002 void
1003 ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
1004 {
1005 }
1006
1007 int
1008 ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
1009 {
1010         /* Nothing to do */
1011         return (0);
1012 }
1013
1014 /********************* Platform Dependent Functions ***************************/
1015 static void
1016 ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
1017 {
1018
1019         if ((instance >= 0)
1020          && (instance < ARRAY_SIZE(aic79xx_iocell_info))) {
1021                 uint8_t *iocell_info;
1022
1023                 iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
1024                 iocell_info[index] = value & 0xFFFF;
1025                 if (bootverbose)
1026                         printk("iocell[%d:%ld] = %d\n", instance, index, value);
1027         }
1028 }
1029
1030 static void
1031 ahd_linux_setup_tag_info_global(char *p)
1032 {
1033         int tags, i, j;
1034
1035         tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
1036         printk("Setting Global Tags= %d\n", tags);
1037
1038         for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) {
1039                 for (j = 0; j < AHD_NUM_TARGETS; j++) {
1040                         aic79xx_tag_info[i].tag_commands[j] = tags;
1041                 }
1042         }
1043 }
1044
1045 static void
1046 ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
1047 {
1048
1049         if ((instance >= 0) && (targ >= 0)
1050          && (instance < ARRAY_SIZE(aic79xx_tag_info))
1051          && (targ < AHD_NUM_TARGETS)) {
1052                 aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
1053                 if (bootverbose)
1054                         printk("tag_info[%d:%d] = %d\n", instance, targ, value);
1055         }
1056 }
1057
1058 static char *
1059 ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
1060                        void (*callback)(u_long, int, int, int32_t),
1061                        u_long callback_arg)
1062 {
1063         char    *tok_end;
1064         char    *tok_end2;
1065         int      i;
1066         int      instance;
1067         int      targ;
1068         int      done;
1069         char     tok_list[] = {'.', ',', '{', '}', '\0'};
1070
1071         /* All options use a ':' name/arg separator */
1072         if (*opt_arg != ':')
1073                 return (opt_arg);
1074         opt_arg++;
1075         instance = -1;
1076         targ = -1;
1077         done = FALSE;
1078         /*
1079          * Restore separator that may be in
1080          * the middle of our option argument.
1081          */
1082         tok_end = strchr(opt_arg, '\0');
1083         if (tok_end < end)
1084                 *tok_end = ',';
1085         while (!done) {
1086                 switch (*opt_arg) {
1087                 case '{':
1088                         if (instance == -1) {
1089                                 instance = 0;
1090                         } else {
1091                                 if (depth > 1) {
1092                                         if (targ == -1)
1093                                                 targ = 0;
1094                                 } else {
1095                                         printk("Malformed Option %s\n",
1096                                                opt_name);
1097                                         done = TRUE;
1098                                 }
1099                         }
1100                         opt_arg++;
1101                         break;
1102                 case '}':
1103                         if (targ != -1)
1104                                 targ = -1;
1105                         else if (instance != -1)
1106                                 instance = -1;
1107                         opt_arg++;
1108                         break;
1109                 case ',':
1110                 case '.':
1111                         if (instance == -1)
1112                                 done = TRUE;
1113                         else if (targ >= 0)
1114                                 targ++;
1115                         else if (instance >= 0)
1116                                 instance++;
1117                         opt_arg++;
1118                         break;
1119                 case '\0':
1120                         done = TRUE;
1121                         break;
1122                 default:
1123                         tok_end = end;
1124                         for (i = 0; tok_list[i]; i++) {
1125                                 tok_end2 = strchr(opt_arg, tok_list[i]);
1126                                 if ((tok_end2) && (tok_end2 < tok_end))
1127                                         tok_end = tok_end2;
1128                         }
1129                         callback(callback_arg, instance, targ,
1130                                  simple_strtol(opt_arg, NULL, 0));
1131                         opt_arg = tok_end;
1132                         break;
1133                 }
1134         }
1135         return (opt_arg);
1136 }
1137
1138 /*
1139  * Handle Linux boot parameters. This routine allows for assigning a value
1140  * to a parameter with a ':' between the parameter and the value.
1141  * ie. aic79xx=stpwlev:1,extended
1142  */
1143 static int
1144 aic79xx_setup(char *s)
1145 {
1146         int     i, n;
1147         char   *p;
1148         char   *end;
1149
1150         static const struct {
1151                 const char *name;
1152                 uint32_t *flag;
1153         } options[] = {
1154                 { "extended", &aic79xx_extended },
1155                 { "no_reset", &aic79xx_no_reset },
1156                 { "verbose", &aic79xx_verbose },
1157                 { "allow_memio", &aic79xx_allow_memio},
1158 #ifdef AHD_DEBUG
1159                 { "debug", &ahd_debug },
1160 #endif
1161                 { "periodic_otag", &aic79xx_periodic_otag },
1162                 { "pci_parity", &aic79xx_pci_parity },
1163                 { "seltime", &aic79xx_seltime },
1164                 { "tag_info", NULL },
1165                 { "global_tag_depth", NULL},
1166                 { "slewrate", NULL },
1167                 { "precomp", NULL },
1168                 { "amplitude", NULL },
1169                 { "slowcrc", &aic79xx_slowcrc },
1170         };
1171
1172         end = strchr(s, '\0');
1173
1174         /*
1175          * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
1176          * will never be 0 in this case.
1177          */
1178         n = 0;
1179
1180         while ((p = strsep(&s, ",.")) != NULL) {
1181                 if (*p == '\0')
1182                         continue;
1183                 for (i = 0; i < ARRAY_SIZE(options); i++) {
1184
1185                         n = strlen(options[i].name);
1186                         if (strncmp(options[i].name, p, n) == 0)
1187                                 break;
1188                 }
1189                 if (i == ARRAY_SIZE(options))
1190                         continue;
1191
1192                 if (strncmp(p, "global_tag_depth", n) == 0) {
1193                         ahd_linux_setup_tag_info_global(p + n);
1194                 } else if (strncmp(p, "tag_info", n) == 0) {
1195                         s = ahd_parse_brace_option("tag_info", p + n, end,
1196                             2, ahd_linux_setup_tag_info, 0);
1197                 } else if (strncmp(p, "slewrate", n) == 0) {
1198                         s = ahd_parse_brace_option("slewrate",
1199                             p + n, end, 1, ahd_linux_setup_iocell_info,
1200                             AIC79XX_SLEWRATE_INDEX);
1201                 } else if (strncmp(p, "precomp", n) == 0) {
1202                         s = ahd_parse_brace_option("precomp",
1203                             p + n, end, 1, ahd_linux_setup_iocell_info,
1204                             AIC79XX_PRECOMP_INDEX);
1205                 } else if (strncmp(p, "amplitude", n) == 0) {
1206                         s = ahd_parse_brace_option("amplitude",
1207                             p + n, end, 1, ahd_linux_setup_iocell_info,
1208                             AIC79XX_AMPLITUDE_INDEX);
1209                 } else if (p[n] == ':') {
1210                         *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
1211                 } else if (!strncmp(p, "verbose", n)) {
1212                         *(options[i].flag) = 1;
1213                 } else {
1214                         *(options[i].flag) ^= 0xFFFFFFFF;
1215                 }
1216         }
1217         return 1;
1218 }
1219
1220 __setup("aic79xx=", aic79xx_setup);
1221
1222 uint32_t aic79xx_verbose;
1223
1224 int
1225 ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
1226 {
1227         char    buf[80];
1228         struct  Scsi_Host *host;
1229         char    *new_name;
1230         u_long  s;
1231         int     retval;
1232
1233         template->name = ahd->description;
1234         host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
1235         if (host == NULL)
1236                 return (ENOMEM);
1237
1238         *((struct ahd_softc **)host->hostdata) = ahd;
1239         ahd->platform_data->host = host;
1240         host->can_queue = AHD_MAX_QUEUE;
1241         host->cmd_per_lun = 2;
1242         host->sg_tablesize = AHD_NSEG;
1243         host->this_id = ahd->our_id;
1244         host->irq = ahd->platform_data->irq;
1245         host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
1246         host->max_lun = AHD_NUM_LUNS;
1247         host->max_channel = 0;
1248         host->sg_tablesize = AHD_NSEG;
1249         ahd_lock(ahd, &s);
1250         ahd_set_unit(ahd, ahd_linux_unit++);
1251         ahd_unlock(ahd, &s);
1252         sprintf(buf, "scsi%d", host->host_no);
1253         new_name = kmalloc(strlen(buf) + 1, GFP_ATOMIC);
1254         if (new_name != NULL) {
1255                 strcpy(new_name, buf);
1256                 ahd_set_name(ahd, new_name);
1257         }
1258         host->unique_id = ahd->unit;
1259         ahd_linux_initialize_scsi_bus(ahd);
1260         ahd_intr_enable(ahd, TRUE);
1261
1262         host->transportt = ahd_linux_transport_template;
1263
1264         retval = scsi_add_host(host, &ahd->dev_softc->dev);
1265         if (retval) {
1266                 printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
1267                 scsi_host_put(host);
1268                 return retval;
1269         }
1270
1271         scsi_scan_host(host);
1272         return 0;
1273 }
1274
1275 /*
1276  * Place the SCSI bus into a known state by either resetting it,
1277  * or forcing transfer negotiations on the next command to any
1278  * target.
1279  */
1280 static void
1281 ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
1282 {
1283         u_int target_id;
1284         u_int numtarg;
1285         unsigned long s;
1286
1287         target_id = 0;
1288         numtarg = 0;
1289
1290         if (aic79xx_no_reset != 0)
1291                 ahd->flags &= ~AHD_RESET_BUS_A;
1292
1293         if ((ahd->flags & AHD_RESET_BUS_A) != 0)
1294                 ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
1295         else
1296                 numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
1297
1298         ahd_lock(ahd, &s);
1299
1300         /*
1301          * Force negotiation to async for all targets that
1302          * will not see an initial bus reset.
1303          */
1304         for (; target_id < numtarg; target_id++) {
1305                 struct ahd_devinfo devinfo;
1306                 struct ahd_initiator_tinfo *tinfo;
1307                 struct ahd_tmode_tstate *tstate;
1308
1309                 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1310                                             target_id, &tstate);
1311                 ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
1312                                     CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
1313                 ahd_update_neg_request(ahd, &devinfo, tstate,
1314                                        tinfo, AHD_NEG_ALWAYS);
1315         }
1316         ahd_unlock(ahd, &s);
1317         /* Give the bus some time to recover */
1318         if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
1319                 ahd_freeze_simq(ahd);
1320                 msleep(AIC79XX_RESET_DELAY);
1321                 ahd_release_simq(ahd);
1322         }
1323 }
1324
1325 int
1326 ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
1327 {
1328         ahd->platform_data =
1329             kzalloc(sizeof(struct ahd_platform_data), GFP_ATOMIC);
1330         if (ahd->platform_data == NULL)
1331                 return (ENOMEM);
1332         ahd->platform_data->irq = AHD_LINUX_NOIRQ;
1333         ahd_lockinit(ahd);
1334         ahd->seltime = (aic79xx_seltime & 0x3) << 4;
1335         return (0);
1336 }
1337
1338 void
1339 ahd_platform_free(struct ahd_softc *ahd)
1340 {
1341         struct scsi_target *starget;
1342         int i;
1343
1344         if (ahd->platform_data != NULL) {
1345                 /* destroy all of the device and target objects */
1346                 for (i = 0; i < AHD_NUM_TARGETS; i++) {
1347                         starget = ahd->platform_data->starget[i];
1348                         if (starget != NULL) {
1349                                 ahd->platform_data->starget[i] = NULL;
1350                         }
1351                 }
1352
1353                 if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
1354                         free_irq(ahd->platform_data->irq, ahd);
1355                 if (ahd->tags[0] == BUS_SPACE_PIO
1356                  && ahd->bshs[0].ioport != 0)
1357                         release_region(ahd->bshs[0].ioport, 256);
1358                 if (ahd->tags[1] == BUS_SPACE_PIO
1359                  && ahd->bshs[1].ioport != 0)
1360                         release_region(ahd->bshs[1].ioport, 256);
1361                 if (ahd->tags[0] == BUS_SPACE_MEMIO
1362                  && ahd->bshs[0].maddr != NULL) {
1363                         iounmap(ahd->bshs[0].maddr);
1364                         release_mem_region(ahd->platform_data->mem_busaddr,
1365                                            0x1000);
1366                 }
1367                 if (ahd->platform_data->host)
1368                         scsi_host_put(ahd->platform_data->host);
1369
1370                 kfree(ahd->platform_data);
1371         }
1372 }
1373
1374 void
1375 ahd_platform_init(struct ahd_softc *ahd)
1376 {
1377         /*
1378          * Lookup and commit any modified IO Cell options.
1379          */
1380         if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
1381                 const struct ahd_linux_iocell_opts *iocell_opts;
1382
1383                 iocell_opts = &aic79xx_iocell_info[ahd->unit];
1384                 if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
1385                         AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
1386                 if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
1387                         AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
1388                 if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
1389                         AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
1390         }
1391
1392 }
1393
1394 void
1395 ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
1396 {
1397         ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1398                                 SCB_GET_CHANNEL(ahd, scb),
1399                                 SCB_GET_LUN(scb), SCB_LIST_NULL,
1400                                 ROLE_UNKNOWN, CAM_REQUEUE_REQ);
1401 }
1402
1403 void
1404 ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
1405                       struct ahd_devinfo *devinfo, ahd_queue_alg alg)
1406 {
1407         struct ahd_linux_device *dev;
1408         int was_queuing;
1409         int now_queuing;
1410
1411         if (sdev == NULL)
1412                 return;
1413
1414         dev = scsi_transport_device_data(sdev);
1415
1416         if (dev == NULL)
1417                 return;
1418         was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
1419         switch (alg) {
1420         default:
1421         case AHD_QUEUE_NONE:
1422                 now_queuing = 0;
1423                 break;
1424         case AHD_QUEUE_BASIC:
1425                 now_queuing = AHD_DEV_Q_BASIC;
1426                 break;
1427         case AHD_QUEUE_TAGGED:
1428                 now_queuing = AHD_DEV_Q_TAGGED;
1429                 break;
1430         }
1431         if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
1432          && (was_queuing != now_queuing)
1433          && (dev->active != 0)) {
1434                 dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
1435                 dev->qfrozen++;
1436         }
1437
1438         dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
1439         if (now_queuing) {
1440                 u_int usertags;
1441
1442                 usertags = ahd_linux_user_tagdepth(ahd, devinfo);
1443                 if (!was_queuing) {
1444                         /*
1445                          * Start out aggressively and allow our
1446                          * dynamic queue depth algorithm to take
1447                          * care of the rest.
1448                          */
1449                         dev->maxtags = usertags;
1450                         dev->openings = dev->maxtags - dev->active;
1451                 }
1452                 if (dev->maxtags == 0) {
1453                         /*
1454                          * Queueing is disabled by the user.
1455                          */
1456                         dev->openings = 1;
1457                 } else if (alg == AHD_QUEUE_TAGGED) {
1458                         dev->flags |= AHD_DEV_Q_TAGGED;
1459                         if (aic79xx_periodic_otag != 0)
1460                                 dev->flags |= AHD_DEV_PERIODIC_OTAG;
1461                 } else
1462                         dev->flags |= AHD_DEV_Q_BASIC;
1463         } else {
1464                 /* We can only have one opening. */
1465                 dev->maxtags = 0;
1466                 dev->openings =  1 - dev->active;
1467         }
1468
1469         switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
1470         case AHD_DEV_Q_BASIC:
1471         case AHD_DEV_Q_TAGGED:
1472                 scsi_change_queue_depth(sdev,
1473                                 dev->openings + dev->active);
1474                 break;
1475         default:
1476                 /*
1477                  * We allow the OS to queue 2 untagged transactions to
1478                  * us at any time even though we can only execute them
1479                  * serially on the controller/device.  This should
1480                  * remove some latency.
1481                  */
1482                 scsi_change_queue_depth(sdev, 1);
1483                 break;
1484         }
1485 }
1486
1487 int
1488 ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
1489                         int lun, u_int tag, role_t role, uint32_t status)
1490 {
1491         return 0;
1492 }
1493
1494 static u_int
1495 ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
1496 {
1497         static int warned_user;
1498         u_int tags;
1499
1500         tags = 0;
1501         if ((ahd->user_discenable & devinfo->target_mask) != 0) {
1502                 if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) {
1503
1504                         if (warned_user == 0) {
1505                                 printk(KERN_WARNING
1506 "aic79xx: WARNING: Insufficient tag_info instances\n"
1507 "aic79xx: for installed controllers.  Using defaults\n"
1508 "aic79xx: Please update the aic79xx_tag_info array in\n"
1509 "aic79xx: the aic79xx_osm.c source file.\n");
1510                                 warned_user++;
1511                         }
1512                         tags = AHD_MAX_QUEUE;
1513                 } else {
1514                         adapter_tag_info_t *tag_info;
1515
1516                         tag_info = &aic79xx_tag_info[ahd->unit];
1517                         tags = tag_info->tag_commands[devinfo->target_offset];
1518                         if (tags > AHD_MAX_QUEUE)
1519                                 tags = AHD_MAX_QUEUE;
1520                 }
1521         }
1522         return (tags);
1523 }
1524
1525 /*
1526  * Determines the queue depth for a given device.
1527  */
1528 static void
1529 ahd_linux_device_queue_depth(struct scsi_device *sdev)
1530 {
1531         struct  ahd_devinfo devinfo;
1532         u_int   tags;
1533         struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
1534
1535         ahd_compile_devinfo(&devinfo,
1536                             ahd->our_id,
1537                             sdev->sdev_target->id, sdev->lun,
1538                             sdev->sdev_target->channel == 0 ? 'A' : 'B',
1539                             ROLE_INITIATOR);
1540         tags = ahd_linux_user_tagdepth(ahd, &devinfo);
1541         if (tags != 0 && sdev->tagged_supported != 0) {
1542
1543                 ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
1544                 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1545                                devinfo.lun, AC_TRANSFER_NEG);
1546                 ahd_print_devinfo(ahd, &devinfo);
1547                 printk("Tagged Queuing enabled.  Depth %d\n", tags);
1548         } else {
1549                 ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
1550                 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1551                                devinfo.lun, AC_TRANSFER_NEG);
1552         }
1553 }
1554
1555 static int
1556 ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
1557                       struct scsi_cmnd *cmd)
1558 {
1559         struct   scb *scb;
1560         struct   hardware_scb *hscb;
1561         struct   ahd_initiator_tinfo *tinfo;
1562         struct   ahd_tmode_tstate *tstate;
1563         u_int    col_idx;
1564         uint16_t mask;
1565         unsigned long flags;
1566         int nseg;
1567
1568         nseg = scsi_dma_map(cmd);
1569         if (nseg < 0)
1570                 return SCSI_MLQUEUE_HOST_BUSY;
1571
1572         ahd_lock(ahd, &flags);
1573
1574         /*
1575          * Get an scb to use.
1576          */
1577         tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1578                                     cmd->device->id, &tstate);
1579         if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
1580          || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
1581                 col_idx = AHD_NEVER_COL_IDX;
1582         } else {
1583                 col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
1584                                             cmd->device->lun);
1585         }
1586         if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
1587                 ahd->flags |= AHD_RESOURCE_SHORTAGE;
1588                 ahd_unlock(ahd, &flags);
1589                 scsi_dma_unmap(cmd);
1590                 return SCSI_MLQUEUE_HOST_BUSY;
1591         }
1592
1593         scb->io_ctx = cmd;
1594         scb->platform_data->dev = dev;
1595         hscb = scb->hscb;
1596         cmd->host_scribble = (char *)scb;
1597
1598         /*
1599          * Fill out basics of the HSCB.
1600          */
1601         hscb->control = 0;
1602         hscb->scsiid = BUILD_SCSIID(ahd, cmd);
1603         hscb->lun = cmd->device->lun;
1604         scb->hscb->task_management = 0;
1605         mask = SCB_GET_TARGET_MASK(ahd, scb);
1606
1607         if ((ahd->user_discenable & mask) != 0)
1608                 hscb->control |= DISCENB;
1609
1610         if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
1611                 scb->flags |= SCB_PACKETIZED;
1612
1613         if ((tstate->auto_negotiate & mask) != 0) {
1614                 scb->flags |= SCB_AUTO_NEGOTIATE;
1615                 scb->hscb->control |= MK_MESSAGE;
1616         }
1617
1618         if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
1619                 if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
1620                  && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
1621                         hscb->control |= MSG_ORDERED_TASK;
1622                         dev->commands_since_idle_or_otag = 0;
1623                 } else {
1624                         hscb->control |= MSG_SIMPLE_TASK;
1625                 }
1626         }
1627
1628         hscb->cdb_len = cmd->cmd_len;
1629         memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
1630
1631         scb->platform_data->xfer_len = 0;
1632         ahd_set_residual(scb, 0);
1633         ahd_set_sense_residual(scb, 0);
1634         scb->sg_count = 0;
1635
1636         if (nseg > 0) {
1637                 void *sg = scb->sg_list;
1638                 struct scatterlist *cur_seg;
1639                 int i;
1640
1641                 scb->platform_data->xfer_len = 0;
1642
1643                 scsi_for_each_sg(cmd, cur_seg, nseg, i) {
1644                         dma_addr_t addr;
1645                         bus_size_t len;
1646
1647                         addr = sg_dma_address(cur_seg);
1648                         len = sg_dma_len(cur_seg);
1649                         scb->platform_data->xfer_len += len;
1650                         sg = ahd_sg_setup(ahd, scb, sg, addr, len,
1651                                           i == (nseg - 1));
1652                 }
1653         }
1654
1655         LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
1656         dev->openings--;
1657         dev->active++;
1658         dev->commands_issued++;
1659
1660         if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
1661                 dev->commands_since_idle_or_otag++;
1662         scb->flags |= SCB_ACTIVE;
1663         ahd_queue_scb(ahd, scb);
1664
1665         ahd_unlock(ahd, &flags);
1666
1667         return 0;
1668 }
1669
1670 /*
1671  * SCSI controller interrupt handler.
1672  */
1673 irqreturn_t
1674 ahd_linux_isr(int irq, void *dev_id)
1675 {
1676         struct  ahd_softc *ahd;
1677         u_long  flags;
1678         int     ours;
1679
1680         ahd = (struct ahd_softc *) dev_id;
1681         ahd_lock(ahd, &flags);
1682         ours = ahd_intr(ahd);
1683         ahd_unlock(ahd, &flags);
1684         return IRQ_RETVAL(ours);
1685 }
1686
1687 void
1688 ahd_send_async(struct ahd_softc *ahd, char channel,
1689                u_int target, u_int lun, ac_code code)
1690 {
1691         switch (code) {
1692         case AC_TRANSFER_NEG:
1693         {
1694                 struct  scsi_target *starget;
1695                 struct  ahd_initiator_tinfo *tinfo;
1696                 struct  ahd_tmode_tstate *tstate;
1697                 unsigned int target_ppr_options;
1698
1699                 BUG_ON(target == CAM_TARGET_WILDCARD);
1700
1701                 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
1702                                             target, &tstate);
1703
1704                 /*
1705                  * Don't bother reporting results while
1706                  * negotiations are still pending.
1707                  */
1708                 if (tinfo->curr.period != tinfo->goal.period
1709                  || tinfo->curr.width != tinfo->goal.width
1710                  || tinfo->curr.offset != tinfo->goal.offset
1711                  || tinfo->curr.ppr_options != tinfo->goal.ppr_options)
1712                         if (bootverbose == 0)
1713                                 break;
1714
1715                 /*
1716                  * Don't bother reporting results that
1717                  * are identical to those last reported.
1718                  */
1719                 starget = ahd->platform_data->starget[target];
1720                 if (starget == NULL)
1721                         break;
1722
1723                 target_ppr_options =
1724                         (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
1725                         + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
1726                         + (spi_iu(starget) ?  MSG_EXT_PPR_IU_REQ : 0)
1727                         + (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
1728                         + (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
1729                         + (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
1730                         + (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
1731                         + (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
1732
1733                 if (tinfo->curr.period == spi_period(starget)
1734                     && tinfo->curr.width == spi_width(starget)
1735                     && tinfo->curr.offset == spi_offset(starget)
1736                  && tinfo->curr.ppr_options == target_ppr_options)
1737                         if (bootverbose == 0)
1738                                 break;
1739
1740                 spi_period(starget) = tinfo->curr.period;
1741                 spi_width(starget) = tinfo->curr.width;
1742                 spi_offset(starget) = tinfo->curr.offset;
1743                 spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
1744                 spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
1745                 spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
1746                 spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
1747                 spi_pcomp_en(starget) =  tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
1748                 spi_rti(starget) =  tinfo->curr.ppr_options &  MSG_EXT_PPR_RTI ? 1 : 0;
1749                 spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
1750                 spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
1751                 spi_display_xfer_agreement(starget);
1752                 break;
1753         }
1754         case AC_SENT_BDR:
1755         {
1756                 WARN_ON(lun != CAM_LUN_WILDCARD);
1757                 scsi_report_device_reset(ahd->platform_data->host,
1758                                          channel - 'A', target);
1759                 break;
1760         }
1761         case AC_BUS_RESET:
1762                 if (ahd->platform_data->host != NULL) {
1763                         scsi_report_bus_reset(ahd->platform_data->host,
1764                                               channel - 'A');
1765                 }
1766                 break;
1767         default:
1768                 panic("ahd_send_async: Unexpected async event");
1769         }
1770 }
1771
1772 /*
1773  * Calls the higher level scsi done function and frees the scb.
1774  */
1775 void
1776 ahd_done(struct ahd_softc *ahd, struct scb *scb)
1777 {
1778         struct scsi_cmnd *cmd;
1779         struct    ahd_linux_device *dev;
1780
1781         if ((scb->flags & SCB_ACTIVE) == 0) {
1782                 printk("SCB %d done'd twice\n", SCB_GET_TAG(scb));
1783                 ahd_dump_card_state(ahd);
1784                 panic("Stopping for safety");
1785         }
1786         LIST_REMOVE(scb, pending_links);
1787         cmd = scb->io_ctx;
1788         dev = scb->platform_data->dev;
1789         dev->active--;
1790         dev->openings++;
1791         if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
1792                 cmd->result &= ~(CAM_DEV_QFRZN << 16);
1793                 dev->qfrozen--;
1794         }
1795         ahd_linux_unmap_scb(ahd, scb);
1796
1797         /*
1798          * Guard against stale sense data.
1799          * The Linux mid-layer assumes that sense
1800          * was retrieved anytime the first byte of
1801          * the sense buffer looks "sane".
1802          */
1803         cmd->sense_buffer[0] = 0;
1804         if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
1805                 uint32_t amount_xferred;
1806
1807                 amount_xferred =
1808                     ahd_get_transfer_length(scb) - ahd_get_residual(scb);
1809                 if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
1810 #ifdef AHD_DEBUG
1811                         if ((ahd_debug & AHD_SHOW_MISC) != 0) {
1812                                 ahd_print_path(ahd, scb);
1813                                 printk("Set CAM_UNCOR_PARITY\n");
1814                         }
1815 #endif
1816                         ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
1817 #ifdef AHD_REPORT_UNDERFLOWS
1818                 /*
1819                  * This code is disabled by default as some
1820                  * clients of the SCSI system do not properly
1821                  * initialize the underflow parameter.  This
1822                  * results in spurious termination of commands
1823                  * that complete as expected (e.g. underflow is
1824                  * allowed as command can return variable amounts
1825                  * of data.
1826                  */
1827                 } else if (amount_xferred < scb->io_ctx->underflow) {
1828                         u_int i;
1829
1830                         ahd_print_path(ahd, scb);
1831                         printk("CDB:");
1832                         for (i = 0; i < scb->io_ctx->cmd_len; i++)
1833                                 printk(" 0x%x", scb->io_ctx->cmnd[i]);
1834                         printk("\n");
1835                         ahd_print_path(ahd, scb);
1836                         printk("Saw underflow (%ld of %ld bytes). "
1837                                "Treated as error\n",
1838                                 ahd_get_residual(scb),
1839                                 ahd_get_transfer_length(scb));
1840                         ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1841 #endif
1842                 } else {
1843                         ahd_set_transaction_status(scb, CAM_REQ_CMP);
1844                 }
1845         } else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
1846                 ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
1847         }
1848
1849         if (dev->openings == 1
1850          && ahd_get_transaction_status(scb) == CAM_REQ_CMP
1851          && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
1852                 dev->tag_success_count++;
1853         /*
1854          * Some devices deal with temporary internal resource
1855          * shortages by returning queue full.  When the queue
1856          * full occurrs, we throttle back.  Slowly try to get
1857          * back to our previous queue depth.
1858          */
1859         if ((dev->openings + dev->active) < dev->maxtags
1860          && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
1861                 dev->tag_success_count = 0;
1862                 dev->openings++;
1863         }
1864
1865         if (dev->active == 0)
1866                 dev->commands_since_idle_or_otag = 0;
1867
1868         if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
1869                 printk("Recovery SCB completes\n");
1870                 if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
1871                  || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
1872                         ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
1873
1874                 if (ahd->platform_data->eh_done)
1875                         complete(ahd->platform_data->eh_done);
1876         }
1877
1878         ahd_free_scb(ahd, scb);
1879         ahd_linux_queue_cmd_complete(ahd, cmd);
1880 }
1881
1882 static void
1883 ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
1884                              struct scsi_device *sdev, struct scb *scb)
1885 {
1886         struct  ahd_devinfo devinfo;
1887         struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
1888
1889         ahd_compile_devinfo(&devinfo,
1890                             ahd->our_id,
1891                             sdev->sdev_target->id, sdev->lun,
1892                             sdev->sdev_target->channel == 0 ? 'A' : 'B',
1893                             ROLE_INITIATOR);
1894
1895         /*
1896          * We don't currently trust the mid-layer to
1897          * properly deal with queue full or busy.  So,
1898          * when one occurs, we tell the mid-layer to
1899          * unconditionally requeue the command to us
1900          * so that we can retry it ourselves.  We also
1901          * implement our own throttling mechanism so
1902          * we don't clobber the device with too many
1903          * commands.
1904          */
1905         switch (ahd_get_scsi_status(scb)) {
1906         default:
1907                 break;
1908         case SCSI_STATUS_CHECK_COND:
1909         case SCSI_STATUS_CMD_TERMINATED:
1910         {
1911                 struct scsi_cmnd *cmd;
1912
1913                 /*
1914                  * Copy sense information to the OS's cmd
1915                  * structure if it is available.
1916                  */
1917                 cmd = scb->io_ctx;
1918                 if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
1919                         struct scsi_status_iu_header *siu;
1920                         u_int sense_size;
1921                         u_int sense_offset;
1922
1923                         if (scb->flags & SCB_SENSE) {
1924                                 sense_size = min(sizeof(struct scsi_sense_data)
1925                                                - ahd_get_sense_residual(scb),
1926                                                  (u_long)SCSI_SENSE_BUFFERSIZE);
1927                                 sense_offset = 0;
1928                         } else {
1929                                 /*
1930                                  * Copy only the sense data into the provided
1931                                  * buffer.
1932                                  */
1933                                 siu = (struct scsi_status_iu_header *)
1934                                     scb->sense_data;
1935                                 sense_size = min_t(size_t,
1936                                                 scsi_4btoul(siu->sense_length),
1937                                                 SCSI_SENSE_BUFFERSIZE);
1938                                 sense_offset = SIU_SENSE_OFFSET(siu);
1939                         }
1940
1941                         memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1942                         memcpy(cmd->sense_buffer,
1943                                ahd_get_sense_buf(ahd, scb)
1944                                + sense_offset, sense_size);
1945                         cmd->result |= (DRIVER_SENSE << 24);
1946
1947 #ifdef AHD_DEBUG
1948                         if (ahd_debug & AHD_SHOW_SENSE) {
1949                                 int i;
1950
1951                                 printk("Copied %d bytes of sense data at %d:",
1952                                        sense_size, sense_offset);
1953                                 for (i = 0; i < sense_size; i++) {
1954                                         if ((i & 0xF) == 0)
1955                                                 printk("\n");
1956                                         printk("0x%x ", cmd->sense_buffer[i]);
1957                                 }
1958                                 printk("\n");
1959                         }
1960 #endif
1961                 }
1962                 break;
1963         }
1964         case SCSI_STATUS_QUEUE_FULL:
1965                 /*
1966                  * By the time the core driver has returned this
1967                  * command, all other commands that were queued
1968                  * to us but not the device have been returned.
1969                  * This ensures that dev->active is equal to
1970                  * the number of commands actually queued to
1971                  * the device.
1972                  */
1973                 dev->tag_success_count = 0;
1974                 if (dev->active != 0) {
1975                         /*
1976                          * Drop our opening count to the number
1977                          * of commands currently outstanding.
1978                          */
1979                         dev->openings = 0;
1980 #ifdef AHD_DEBUG
1981                         if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
1982                                 ahd_print_path(ahd, scb);
1983                                 printk("Dropping tag count to %d\n",
1984                                        dev->active);
1985                         }
1986 #endif
1987                         if (dev->active == dev->tags_on_last_queuefull) {
1988
1989                                 dev->last_queuefull_same_count++;
1990                                 /*
1991                                  * If we repeatedly see a queue full
1992                                  * at the same queue depth, this
1993                                  * device has a fixed number of tag
1994                                  * slots.  Lock in this tag depth
1995                                  * so we stop seeing queue fulls from
1996                                  * this device.
1997                                  */
1998                                 if (dev->last_queuefull_same_count
1999                                  == AHD_LOCK_TAGS_COUNT) {
2000                                         dev->maxtags = dev->active;
2001                                         ahd_print_path(ahd, scb);
2002                                         printk("Locking max tag count at %d\n",
2003                                                dev->active);
2004                                 }
2005                         } else {
2006                                 dev->tags_on_last_queuefull = dev->active;
2007                                 dev->last_queuefull_same_count = 0;
2008                         }
2009                         ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
2010                         ahd_set_scsi_status(scb, SCSI_STATUS_OK);
2011                         ahd_platform_set_tags(ahd, sdev, &devinfo,
2012                                      (dev->flags & AHD_DEV_Q_BASIC)
2013                                    ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2014                         break;
2015                 }
2016                 /*
2017                  * Drop down to a single opening, and treat this
2018                  * as if the target returned BUSY SCSI status.
2019                  */
2020                 dev->openings = 1;
2021                 ahd_platform_set_tags(ahd, sdev, &devinfo,
2022                              (dev->flags & AHD_DEV_Q_BASIC)
2023                            ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2024                 ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
2025         }
2026 }
2027
2028 static void
2029 ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
2030 {
2031         int status;
2032         int new_status = DID_OK;
2033         int do_fallback = 0;
2034         int scsi_status;
2035
2036         /*
2037          * Map CAM error codes into Linux Error codes.  We
2038          * avoid the conversion so that the DV code has the
2039          * full error information available when making
2040          * state change decisions.
2041          */
2042
2043         status = ahd_cmd_get_transaction_status(cmd);
2044         switch (status) {
2045         case CAM_REQ_INPROG:
2046         case CAM_REQ_CMP:
2047                 new_status = DID_OK;
2048                 break;
2049         case CAM_AUTOSENSE_FAIL:
2050                 new_status = DID_ERROR;
2051                 /* Fallthrough */
2052         case CAM_SCSI_STATUS_ERROR:
2053                 scsi_status = ahd_cmd_get_scsi_status(cmd);
2054
2055                 switch(scsi_status) {
2056                 case SCSI_STATUS_CMD_TERMINATED:
2057                 case SCSI_STATUS_CHECK_COND:
2058                         if ((cmd->result >> 24) != DRIVER_SENSE) {
2059                                 do_fallback = 1;
2060                         } else {
2061                                 struct scsi_sense_data *sense;
2062
2063                                 sense = (struct scsi_sense_data *)
2064                                         cmd->sense_buffer;
2065                                 if (sense->extra_len >= 5 &&
2066                                     (sense->add_sense_code == 0x47
2067                                      || sense->add_sense_code == 0x48))
2068                                         do_fallback = 1;
2069                         }
2070                         break;
2071                 default:
2072                         break;
2073                 }
2074                 break;
2075         case CAM_REQ_ABORTED:
2076                 new_status = DID_ABORT;
2077                 break;
2078         case CAM_BUSY:
2079                 new_status = DID_BUS_BUSY;
2080                 break;
2081         case CAM_REQ_INVALID:
2082         case CAM_PATH_INVALID:
2083                 new_status = DID_BAD_TARGET;
2084                 break;
2085         case CAM_SEL_TIMEOUT:
2086                 new_status = DID_NO_CONNECT;
2087                 break;
2088         case CAM_SCSI_BUS_RESET:
2089         case CAM_BDR_SENT:
2090                 new_status = DID_RESET;
2091                 break;
2092         case CAM_UNCOR_PARITY:
2093                 new_status = DID_PARITY;
2094                 do_fallback = 1;
2095                 break;
2096         case CAM_CMD_TIMEOUT:
2097                 new_status = DID_TIME_OUT;
2098                 do_fallback = 1;
2099                 break;
2100         case CAM_REQ_CMP_ERR:
2101         case CAM_UNEXP_BUSFREE:
2102         case CAM_DATA_RUN_ERR:
2103                 new_status = DID_ERROR;
2104                 do_fallback = 1;
2105                 break;
2106         case CAM_UA_ABORT:
2107         case CAM_NO_HBA:
2108         case CAM_SEQUENCE_FAIL:
2109         case CAM_CCB_LEN_ERR:
2110         case CAM_PROVIDE_FAIL:
2111         case CAM_REQ_TERMIO:
2112         case CAM_UNREC_HBA_ERROR:
2113         case CAM_REQ_TOO_BIG:
2114                 new_status = DID_ERROR;
2115                 break;
2116         case CAM_REQUEUE_REQ:
2117                 new_status = DID_REQUEUE;
2118                 break;
2119         default:
2120                 /* We should never get here */
2121                 new_status = DID_ERROR;
2122                 break;
2123         }
2124
2125         if (do_fallback) {
2126                 printk("%s: device overrun (status %x) on %d:%d:%d\n",
2127                        ahd_name(ahd), status, cmd->device->channel,
2128                        cmd->device->id, (u8)cmd->device->lun);
2129         }
2130
2131         ahd_cmd_set_transaction_status(cmd, new_status);
2132
2133         cmd->scsi_done(cmd);
2134 }
2135
2136 static void
2137 ahd_freeze_simq(struct ahd_softc *ahd)
2138 {
2139         scsi_block_requests(ahd->platform_data->host);
2140 }
2141
2142 static void
2143 ahd_release_simq(struct ahd_softc *ahd)
2144 {
2145         scsi_unblock_requests(ahd->platform_data->host);
2146 }
2147
2148 static int
2149 ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
2150 {
2151         struct ahd_softc *ahd;
2152         struct ahd_linux_device *dev;
2153         struct scb *pending_scb;
2154         u_int  saved_scbptr;
2155         u_int  active_scbptr;
2156         u_int  last_phase;
2157         u_int  saved_scsiid;
2158         u_int  cdb_byte;
2159         int    retval;
2160         int    was_paused;
2161         int    paused;
2162         int    wait;
2163         int    disconnected;
2164         ahd_mode_state saved_modes;
2165         unsigned long flags;
2166
2167         pending_scb = NULL;
2168         paused = FALSE;
2169         wait = FALSE;
2170         ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
2171
2172         scmd_printk(KERN_INFO, cmd,
2173                     "Attempting to queue an ABORT message:");
2174
2175         printk("CDB:");
2176         for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
2177                 printk(" 0x%x", cmd->cmnd[cdb_byte]);
2178         printk("\n");
2179
2180         ahd_lock(ahd, &flags);
2181
2182         /*
2183          * First determine if we currently own this command.
2184          * Start by searching the device queue.  If not found
2185          * there, check the pending_scb list.  If not found
2186          * at all, and the system wanted us to just abort the
2187          * command, return success.
2188          */
2189         dev = scsi_transport_device_data(cmd->device);
2190
2191         if (dev == NULL) {
2192                 /*
2193                  * No target device for this command exists,
2194                  * so we must not still own the command.
2195                  */
2196                 scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
2197                 retval = SUCCESS;
2198                 goto no_cmd;
2199         }
2200
2201         /*
2202          * See if we can find a matching cmd in the pending list.
2203          */
2204         LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2205                 if (pending_scb->io_ctx == cmd)
2206                         break;
2207         }
2208
2209         if (pending_scb == NULL) {
2210                 scmd_printk(KERN_INFO, cmd, "Command not found\n");
2211                 goto no_cmd;
2212         }
2213
2214         if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
2215                 /*
2216                  * We can't queue two recovery actions using the same SCB
2217                  */
2218                 retval = FAILED;
2219                 goto  done;
2220         }
2221
2222         /*
2223          * Ensure that the card doesn't do anything
2224          * behind our back.  Also make sure that we
2225          * didn't "just" miss an interrupt that would
2226          * affect this cmd.
2227          */
2228         was_paused = ahd_is_paused(ahd);
2229         ahd_pause_and_flushwork(ahd);
2230         paused = TRUE;
2231
2232         if ((pending_scb->flags & SCB_ACTIVE) == 0) {
2233                 scmd_printk(KERN_INFO, cmd, "Command already completed\n");
2234                 goto no_cmd;
2235         }
2236
2237         printk("%s: At time of recovery, card was %spaused\n",
2238                ahd_name(ahd), was_paused ? "" : "not ");
2239         ahd_dump_card_state(ahd);
2240
2241         disconnected = TRUE;
2242         if (ahd_search_qinfifo(ahd, cmd->device->id,
2243                                cmd->device->channel + 'A',
2244                                cmd->device->lun,
2245                                pending_scb->hscb->tag,
2246                                ROLE_INITIATOR, CAM_REQ_ABORTED,
2247                                SEARCH_COMPLETE) > 0) {
2248                 printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2249                        ahd_name(ahd), cmd->device->channel,
2250                        cmd->device->id, (u8)cmd->device->lun);
2251                 retval = SUCCESS;
2252                 goto done;
2253         }
2254
2255         saved_modes = ahd_save_modes(ahd);
2256         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2257         last_phase = ahd_inb(ahd, LASTPHASE);
2258         saved_scbptr = ahd_get_scbptr(ahd);
2259         active_scbptr = saved_scbptr;
2260         if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
2261                 struct scb *bus_scb;
2262
2263                 bus_scb = ahd_lookup_scb(ahd, active_scbptr);
2264                 if (bus_scb == pending_scb)
2265                         disconnected = FALSE;
2266         }
2267
2268         /*
2269          * At this point, pending_scb is the scb associated with the
2270          * passed in command.  That command is currently active on the
2271          * bus or is in the disconnected state.
2272          */
2273         saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2274         if (last_phase != P_BUSFREE
2275             && SCB_GET_TAG(pending_scb) == active_scbptr) {
2276
2277                 /*
2278                  * We're active on the bus, so assert ATN
2279                  * and hope that the target responds.
2280                  */
2281                 pending_scb = ahd_lookup_scb(ahd, active_scbptr);
2282                 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2283                 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2284                 ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
2285                 scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
2286                 wait = TRUE;
2287         } else if (disconnected) {
2288
2289                 /*
2290                  * Actually re-queue this SCB in an attempt
2291                  * to select the device before it reconnects.
2292                  */
2293                 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2294                 ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
2295                 pending_scb->hscb->cdb_len = 0;
2296                 pending_scb->hscb->task_attribute = 0;
2297                 pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
2298
2299                 if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
2300                         /*
2301                          * Mark the SCB has having an outstanding
2302                          * task management function.  Should the command
2303                          * complete normally before the task management
2304                          * function can be sent, the host will be notified
2305                          * to abort our requeued SCB.
2306                          */
2307                         ahd_outb(ahd, SCB_TASK_MANAGEMENT,
2308                                  pending_scb->hscb->task_management);
2309                 } else {
2310                         /*
2311                          * If non-packetized, set the MK_MESSAGE control
2312                          * bit indicating that we desire to send a message.
2313                          * We also set the disconnected flag since there is
2314                          * no guarantee that our SCB control byte matches
2315                          * the version on the card.  We don't want the
2316                          * sequencer to abort the command thinking an
2317                          * unsolicited reselection occurred.
2318                          */
2319                         pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
2320
2321                         /*
2322                          * The sequencer will never re-reference the
2323                          * in-core SCB.  To make sure we are notified
2324                          * during reselection, set the MK_MESSAGE flag in
2325                          * the card's copy of the SCB.
2326                          */
2327                         ahd_outb(ahd, SCB_CONTROL,
2328                                  ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
2329                 }
2330
2331                 /*
2332                  * Clear out any entries in the QINFIFO first
2333                  * so we are the next SCB for this target
2334                  * to run.
2335                  */
2336                 ahd_search_qinfifo(ahd, cmd->device->id,
2337                                    cmd->device->channel + 'A', cmd->device->lun,
2338                                    SCB_LIST_NULL, ROLE_INITIATOR,
2339                                    CAM_REQUEUE_REQ, SEARCH_COMPLETE);
2340                 ahd_qinfifo_requeue_tail(ahd, pending_scb);
2341                 ahd_set_scbptr(ahd, saved_scbptr);
2342                 ahd_print_path(ahd, pending_scb);
2343                 printk("Device is disconnected, re-queuing SCB\n");
2344                 wait = TRUE;
2345         } else {
2346                 scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
2347                 retval = FAILED;
2348                 goto done;
2349         }
2350
2351 no_cmd:
2352         /*
2353          * Our assumption is that if we don't have the command, no
2354          * recovery action was required, so we return success.  Again,
2355          * the semantics of the mid-layer recovery engine are not
2356          * well defined, so this may change in time.
2357          */
2358         retval = SUCCESS;
2359 done:
2360         if (paused)
2361                 ahd_unpause(ahd);
2362         if (wait) {
2363                 DECLARE_COMPLETION_ONSTACK(done);
2364
2365                 ahd->platform_data->eh_done = &done;
2366                 ahd_unlock(ahd, &flags);
2367
2368                 printk("%s: Recovery code sleeping\n", ahd_name(ahd));
2369                 if (!wait_for_completion_timeout(&done, 5 * HZ)) {
2370                         ahd_lock(ahd, &flags);
2371                         ahd->platform_data->eh_done = NULL;
2372                         ahd_unlock(ahd, &flags);
2373                         printk("%s: Timer Expired (active %d)\n",
2374                                ahd_name(ahd), dev->active);
2375                         retval = FAILED;
2376                 }
2377                 printk("Recovery code awake\n");
2378         } else
2379                 ahd_unlock(ahd, &flags);
2380
2381         if (retval != SUCCESS)
2382                 printk("%s: Command abort returning 0x%x\n",
2383                        ahd_name(ahd), retval);
2384
2385         return retval;
2386 }
2387
2388 static void ahd_linux_set_width(struct scsi_target *starget, int width)
2389 {
2390         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2391         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2392         struct ahd_devinfo devinfo;
2393         unsigned long flags;
2394
2395         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2396                             starget->channel + 'A', ROLE_INITIATOR);
2397         ahd_lock(ahd, &flags);
2398         ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
2399         ahd_unlock(ahd, &flags);
2400 }
2401
2402 static void ahd_linux_set_period(struct scsi_target *starget, int period)
2403 {
2404         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2405         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2406         struct ahd_tmode_tstate *tstate;
2407         struct ahd_initiator_tinfo *tinfo
2408                 = ahd_fetch_transinfo(ahd,
2409                                       starget->channel + 'A',
2410                                       shost->this_id, starget->id, &tstate);
2411         struct ahd_devinfo devinfo;
2412         unsigned int ppr_options = tinfo->goal.ppr_options;
2413         unsigned int dt;
2414         unsigned long flags;
2415         unsigned long offset = tinfo->goal.offset;
2416
2417 #ifdef AHD_DEBUG
2418         if ((ahd_debug & AHD_SHOW_DV) != 0)
2419                 printk("%s: set period to %d\n", ahd_name(ahd), period);
2420 #endif
2421         if (offset == 0)
2422                 offset = MAX_OFFSET;
2423
2424         if (period < 8)
2425                 period = 8;
2426         if (period < 10) {
2427                 if (spi_max_width(starget)) {
2428                         ppr_options |= MSG_EXT_PPR_DT_REQ;
2429                         if (period == 8)
2430                                 ppr_options |= MSG_EXT_PPR_IU_REQ;
2431                 } else
2432                         period = 10;
2433         }
2434
2435         dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2436
2437         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2438                             starget->channel + 'A', ROLE_INITIATOR);
2439
2440         /* all PPR requests apart from QAS require wide transfers */
2441         if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
2442                 if (spi_width(starget) == 0)
2443                         ppr_options &= MSG_EXT_PPR_QAS_REQ;
2444         }
2445
2446         ahd_find_syncrate(ahd, &period, &ppr_options,
2447                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2448
2449         ahd_lock(ahd, &flags);
2450         ahd_set_syncrate(ahd, &devinfo, period, offset,
2451                          ppr_options, AHD_TRANS_GOAL, FALSE);
2452         ahd_unlock(ahd, &flags);
2453 }
2454
2455 static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
2456 {
2457         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2458         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2459         struct ahd_tmode_tstate *tstate;
2460         struct ahd_initiator_tinfo *tinfo
2461                 = ahd_fetch_transinfo(ahd,
2462                                       starget->channel + 'A',
2463                                       shost->this_id, starget->id, &tstate);
2464         struct ahd_devinfo devinfo;
2465         unsigned int ppr_options = 0;
2466         unsigned int period = 0;
2467         unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2468         unsigned long flags;
2469
2470 #ifdef AHD_DEBUG
2471         if ((ahd_debug & AHD_SHOW_DV) != 0)
2472                 printk("%s: set offset to %d\n", ahd_name(ahd), offset);
2473 #endif
2474
2475         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2476                             starget->channel + 'A', ROLE_INITIATOR);
2477         if (offset != 0) {
2478                 period = tinfo->goal.period;
2479                 ppr_options = tinfo->goal.ppr_options;
2480                 ahd_find_syncrate(ahd, &period, &ppr_options,
2481                                   dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2482         }
2483
2484         ahd_lock(ahd, &flags);
2485         ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
2486                          AHD_TRANS_GOAL, FALSE);
2487         ahd_unlock(ahd, &flags);
2488 }
2489
2490 static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
2491 {
2492         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2493         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2494         struct ahd_tmode_tstate *tstate;
2495         struct ahd_initiator_tinfo *tinfo
2496                 = ahd_fetch_transinfo(ahd,
2497                                       starget->channel + 'A',
2498                                       shost->this_id, starget->id, &tstate);
2499         struct ahd_devinfo devinfo;
2500         unsigned int ppr_options = tinfo->goal.ppr_options
2501                 & ~MSG_EXT_PPR_DT_REQ;
2502         unsigned int period = tinfo->goal.period;
2503         unsigned int width = tinfo->goal.width;
2504         unsigned long flags;
2505
2506 #ifdef AHD_DEBUG
2507         if ((ahd_debug & AHD_SHOW_DV) != 0)
2508                 printk("%s: %s DT\n", ahd_name(ahd),
2509                        dt ? "enabling" : "disabling");
2510 #endif
2511         if (dt && spi_max_width(starget)) {
2512                 ppr_options |= MSG_EXT_PPR_DT_REQ;
2513                 if (!width)
2514                         ahd_linux_set_width(starget, 1);
2515         } else {
2516                 if (period <= 9)
2517                         period = 10; /* If resetting DT, period must be >= 25ns */
2518                 /* IU is invalid without DT set */
2519                 ppr_options &= ~MSG_EXT_PPR_IU_REQ;
2520         }
2521         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2522                             starget->channel + 'A', ROLE_INITIATOR);
2523         ahd_find_syncrate(ahd, &period, &ppr_options,
2524                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2525
2526         ahd_lock(ahd, &flags);
2527         ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2528                          ppr_options, AHD_TRANS_GOAL, FALSE);
2529         ahd_unlock(ahd, &flags);
2530 }
2531
2532 static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
2533 {
2534         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2535         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2536         struct ahd_tmode_tstate *tstate;
2537         struct ahd_initiator_tinfo *tinfo
2538                 = ahd_fetch_transinfo(ahd,
2539                                       starget->channel + 'A',
2540                                       shost->this_id, starget->id, &tstate);
2541         struct ahd_devinfo devinfo;
2542         unsigned int ppr_options = tinfo->goal.ppr_options
2543                 & ~MSG_EXT_PPR_QAS_REQ;
2544         unsigned int period = tinfo->goal.period;
2545         unsigned int dt;
2546         unsigned long flags;
2547
2548 #ifdef AHD_DEBUG
2549         if ((ahd_debug & AHD_SHOW_DV) != 0)
2550                 printk("%s: %s QAS\n", ahd_name(ahd),
2551                        qas ? "enabling" : "disabling");
2552 #endif
2553
2554         if (qas) {
2555                 ppr_options |= MSG_EXT_PPR_QAS_REQ;
2556         }
2557
2558         dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2559
2560         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2561                             starget->channel + 'A', ROLE_INITIATOR);
2562         ahd_find_syncrate(ahd, &period, &ppr_options,
2563                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2564
2565         ahd_lock(ahd, &flags);
2566         ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2567                          ppr_options, AHD_TRANS_GOAL, FALSE);
2568         ahd_unlock(ahd, &flags);
2569 }
2570
2571 static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
2572 {
2573         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2574         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2575         struct ahd_tmode_tstate *tstate;
2576         struct ahd_initiator_tinfo *tinfo
2577                 = ahd_fetch_transinfo(ahd,
2578                                       starget->channel + 'A',
2579                                       shost->this_id, starget->id, &tstate);
2580         struct ahd_devinfo devinfo;
2581         unsigned int ppr_options = tinfo->goal.ppr_options
2582                 & ~MSG_EXT_PPR_IU_REQ;
2583         unsigned int period = tinfo->goal.period;
2584         unsigned int dt;
2585         unsigned long flags;
2586
2587 #ifdef AHD_DEBUG
2588         if ((ahd_debug & AHD_SHOW_DV) != 0)
2589                 printk("%s: %s IU\n", ahd_name(ahd),
2590                        iu ? "enabling" : "disabling");
2591 #endif
2592
2593         if (iu && spi_max_width(starget)) {
2594                 ppr_options |= MSG_EXT_PPR_IU_REQ;
2595                 ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
2596         }
2597
2598         dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2599
2600         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2601                             starget->channel + 'A', ROLE_INITIATOR);
2602         ahd_find_syncrate(ahd, &period, &ppr_options,
2603                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2604
2605         ahd_lock(ahd, &flags);
2606         ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2607                          ppr_options, AHD_TRANS_GOAL, FALSE);
2608         ahd_unlock(ahd, &flags);
2609 }
2610
2611 static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
2612 {
2613         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2614         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2615         struct ahd_tmode_tstate *tstate;
2616         struct ahd_initiator_tinfo *tinfo
2617                 = ahd_fetch_transinfo(ahd,
2618                                       starget->channel + 'A',
2619                                       shost->this_id, starget->id, &tstate);
2620         struct ahd_devinfo devinfo;
2621         unsigned int ppr_options = tinfo->goal.ppr_options
2622                 & ~MSG_EXT_PPR_RD_STRM;
2623         unsigned int period = tinfo->goal.period;
2624         unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2625         unsigned long flags;
2626
2627 #ifdef AHD_DEBUG
2628         if ((ahd_debug & AHD_SHOW_DV) != 0)
2629                 printk("%s: %s Read Streaming\n", ahd_name(ahd),
2630                        rdstrm  ? "enabling" : "disabling");
2631 #endif
2632
2633         if (rdstrm && spi_max_width(starget))
2634                 ppr_options |= MSG_EXT_PPR_RD_STRM;
2635
2636         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2637                             starget->channel + 'A', ROLE_INITIATOR);
2638         ahd_find_syncrate(ahd, &period, &ppr_options,
2639                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2640
2641         ahd_lock(ahd, &flags);
2642         ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2643                          ppr_options, AHD_TRANS_GOAL, FALSE);
2644         ahd_unlock(ahd, &flags);
2645 }
2646
2647 static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
2648 {
2649         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2650         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2651         struct ahd_tmode_tstate *tstate;
2652         struct ahd_initiator_tinfo *tinfo
2653                 = ahd_fetch_transinfo(ahd,
2654                                       starget->channel + 'A',
2655                                       shost->this_id, starget->id, &tstate);
2656         struct ahd_devinfo devinfo;
2657         unsigned int ppr_options = tinfo->goal.ppr_options
2658                 & ~MSG_EXT_PPR_WR_FLOW;
2659         unsigned int period = tinfo->goal.period;
2660         unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2661         unsigned long flags;
2662
2663 #ifdef AHD_DEBUG
2664         if ((ahd_debug & AHD_SHOW_DV) != 0)
2665                 printk("%s: %s Write Flow Control\n", ahd_name(ahd),
2666                        wrflow ? "enabling" : "disabling");
2667 #endif
2668
2669         if (wrflow && spi_max_width(starget))
2670                 ppr_options |= MSG_EXT_PPR_WR_FLOW;
2671
2672         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2673                             starget->channel + 'A', ROLE_INITIATOR);
2674         ahd_find_syncrate(ahd, &period, &ppr_options,
2675                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2676
2677         ahd_lock(ahd, &flags);
2678         ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2679                          ppr_options, AHD_TRANS_GOAL, FALSE);
2680         ahd_unlock(ahd, &flags);
2681 }
2682
2683 static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
2684 {
2685         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2686         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2687         struct ahd_tmode_tstate *tstate;
2688         struct ahd_initiator_tinfo *tinfo
2689                 = ahd_fetch_transinfo(ahd,
2690                                       starget->channel + 'A',
2691                                       shost->this_id, starget->id, &tstate);
2692         struct ahd_devinfo devinfo;
2693         unsigned int ppr_options = tinfo->goal.ppr_options
2694                 & ~MSG_EXT_PPR_RTI;
2695         unsigned int period = tinfo->goal.period;
2696         unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2697         unsigned long flags;
2698
2699         if ((ahd->features & AHD_RTI) == 0) {
2700 #ifdef AHD_DEBUG
2701                 if ((ahd_debug & AHD_SHOW_DV) != 0)
2702                         printk("%s: RTI not available\n", ahd_name(ahd));
2703 #endif
2704                 return;
2705         }
2706
2707 #ifdef AHD_DEBUG
2708         if ((ahd_debug & AHD_SHOW_DV) != 0)
2709                 printk("%s: %s RTI\n", ahd_name(ahd),
2710                        rti ? "enabling" : "disabling");
2711 #endif
2712
2713         if (rti && spi_max_width(starget))
2714                 ppr_options |= MSG_EXT_PPR_RTI;
2715
2716         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2717                             starget->channel + 'A', ROLE_INITIATOR);
2718         ahd_find_syncrate(ahd, &period, &ppr_options,
2719                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2720
2721         ahd_lock(ahd, &flags);
2722         ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2723                          ppr_options, AHD_TRANS_GOAL, FALSE);
2724         ahd_unlock(ahd, &flags);
2725 }
2726
2727 static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
2728 {
2729         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2730         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2731         struct ahd_tmode_tstate *tstate;
2732         struct ahd_initiator_tinfo *tinfo
2733                 = ahd_fetch_transinfo(ahd,
2734                                       starget->channel + 'A',
2735                                       shost->this_id, starget->id, &tstate);
2736         struct ahd_devinfo devinfo;
2737         unsigned int ppr_options = tinfo->goal.ppr_options
2738                 & ~MSG_EXT_PPR_PCOMP_EN;
2739         unsigned int period = tinfo->goal.period;
2740         unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2741         unsigned long flags;
2742
2743 #ifdef AHD_DEBUG
2744         if ((ahd_debug & AHD_SHOW_DV) != 0)
2745                 printk("%s: %s Precompensation\n", ahd_name(ahd),
2746                        pcomp ? "Enable" : "Disable");
2747 #endif
2748
2749         if (pcomp && spi_max_width(starget)) {
2750                 uint8_t precomp;
2751
2752                 if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
2753                         const struct ahd_linux_iocell_opts *iocell_opts;
2754
2755                         iocell_opts = &aic79xx_iocell_info[ahd->unit];
2756                         precomp = iocell_opts->precomp;
2757                 } else {
2758                         precomp = AIC79XX_DEFAULT_PRECOMP;
2759                 }
2760                 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
2761                 AHD_SET_PRECOMP(ahd, precomp);
2762         } else {
2763                 AHD_SET_PRECOMP(ahd, 0);
2764         }
2765
2766         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2767                             starget->channel + 'A', ROLE_INITIATOR);
2768         ahd_find_syncrate(ahd, &period, &ppr_options,
2769                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2770
2771         ahd_lock(ahd, &flags);
2772         ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2773                          ppr_options, AHD_TRANS_GOAL, FALSE);
2774         ahd_unlock(ahd, &flags);
2775 }
2776
2777 static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
2778 {
2779         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2780         struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2781         struct ahd_tmode_tstate *tstate;
2782         struct ahd_initiator_tinfo *tinfo
2783                 = ahd_fetch_transinfo(ahd,
2784                                       starget->channel + 'A',
2785                                       shost->this_id, starget->id, &tstate);
2786         struct ahd_devinfo devinfo;
2787         unsigned int ppr_options = tinfo->goal.ppr_options
2788                 & ~MSG_EXT_PPR_HOLD_MCS;
2789         unsigned int period = tinfo->goal.period;
2790         unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2791         unsigned long flags;
2792
2793         if (hold && spi_max_width(starget))
2794                 ppr_options |= MSG_EXT_PPR_HOLD_MCS;
2795
2796         ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2797                             starget->channel + 'A', ROLE_INITIATOR);
2798         ahd_find_syncrate(ahd, &period, &ppr_options,
2799                           dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2800
2801         ahd_lock(ahd, &flags);
2802         ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2803                          ppr_options, AHD_TRANS_GOAL, FALSE);
2804         ahd_unlock(ahd, &flags);
2805 }
2806
2807 static void ahd_linux_get_signalling(struct Scsi_Host *shost)
2808 {
2809         struct ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata;
2810         unsigned long flags;
2811         u8 mode;
2812
2813         ahd_lock(ahd, &flags);
2814         ahd_pause(ahd);
2815         mode = ahd_inb(ahd, SBLKCTL);
2816         ahd_unpause(ahd);
2817         ahd_unlock(ahd, &flags);
2818
2819         if (mode & ENAB40)
2820                 spi_signalling(shost) = SPI_SIGNAL_LVD;
2821         else if (mode & ENAB20)
2822                 spi_signalling(shost) = SPI_SIGNAL_SE;
2823         else
2824                 spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
2825 }
2826
2827 static struct spi_function_template ahd_linux_transport_functions = {
2828         .set_offset     = ahd_linux_set_offset,
2829         .show_offset    = 1,
2830         .set_period     = ahd_linux_set_period,
2831         .show_period    = 1,
2832         .set_width      = ahd_linux_set_width,
2833         .show_width     = 1,
2834         .set_dt         = ahd_linux_set_dt,
2835         .show_dt        = 1,
2836         .set_iu         = ahd_linux_set_iu,
2837         .show_iu        = 1,
2838         .set_qas        = ahd_linux_set_qas,
2839         .show_qas       = 1,
2840         .set_rd_strm    = ahd_linux_set_rd_strm,
2841         .show_rd_strm   = 1,
2842         .set_wr_flow    = ahd_linux_set_wr_flow,
2843         .show_wr_flow   = 1,
2844         .set_rti        = ahd_linux_set_rti,
2845         .show_rti       = 1,
2846         .set_pcomp_en   = ahd_linux_set_pcomp_en,
2847         .show_pcomp_en  = 1,
2848         .set_hold_mcs   = ahd_linux_set_hold_mcs,
2849         .show_hold_mcs  = 1,
2850         .get_signalling = ahd_linux_get_signalling,
2851 };
2852
2853 static int __init
2854 ahd_linux_init(void)
2855 {
2856         int     error = 0;
2857
2858         /*
2859          * If we've been passed any parameters, process them now.
2860          */
2861         if (aic79xx)
2862                 aic79xx_setup(aic79xx);
2863
2864         ahd_linux_transport_template =
2865                 spi_attach_transport(&ahd_linux_transport_functions);
2866         if (!ahd_linux_transport_template)
2867                 return -ENODEV;
2868
2869         scsi_transport_reserve_device(ahd_linux_transport_template,
2870                                       sizeof(struct ahd_linux_device));
2871
2872         error = ahd_linux_pci_init();
2873         if (error)
2874                 spi_release_transport(ahd_linux_transport_template);
2875         return error;
2876 }
2877
2878 static void __exit
2879 ahd_linux_exit(void)
2880 {
2881         ahd_linux_pci_exit();
2882         spi_release_transport(ahd_linux_transport_template);
2883 }
2884
2885 module_init(ahd_linux_init);
2886 module_exit(ahd_linux_exit);