Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / pwm / pwm-sti.c
1 /*
2  * PWM device driver for ST SoCs.
3  * Author: Ajit Pal Singh <ajitpal.singh@st.com>
4  *
5  * Copyright (C) 2013-2014 STMicroelectronics (R&D) Limited
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  */
12
13 #include <linux/clk.h>
14 #include <linux/math64.h>
15 #include <linux/mfd/syscon.h>
16 #include <linux/module.h>
17 #include <linux/of.h>
18 #include <linux/platform_device.h>
19 #include <linux/pwm.h>
20 #include <linux/regmap.h>
21 #include <linux/slab.h>
22 #include <linux/time.h>
23
24 #define STI_DS_REG(ch)  (4 * (ch))      /* Channel's Duty Cycle register */
25 #define STI_PWMCR       0x50            /* Control/Config register */
26 #define STI_INTEN       0x54            /* Interrupt Enable/Disable register */
27 #define PWM_PRESCALE_LOW_MASK           0x0f
28 #define PWM_PRESCALE_HIGH_MASK          0xf0
29
30 /* Regfield IDs */
31 enum {
32         PWMCLK_PRESCALE_LOW,
33         PWMCLK_PRESCALE_HIGH,
34         PWM_EN,
35         PWM_INT_EN,
36
37         /* Keep last */
38         MAX_REGFIELDS
39 };
40
41 struct sti_pwm_compat_data {
42         const struct reg_field *reg_fields;
43         unsigned int num_chan;
44         unsigned int max_pwm_cnt;
45         unsigned int max_prescale;
46 };
47
48 struct sti_pwm_chip {
49         struct device *dev;
50         struct clk *clk;
51         unsigned long clk_rate;
52         struct regmap *regmap;
53         struct sti_pwm_compat_data *cdata;
54         struct regmap_field *prescale_low;
55         struct regmap_field *prescale_high;
56         struct regmap_field *pwm_en;
57         struct regmap_field *pwm_int_en;
58         struct pwm_chip chip;
59         struct pwm_device *cur;
60         unsigned long configured;
61         unsigned int en_count;
62         struct mutex sti_pwm_lock; /* To sync between enable/disable calls */
63         void __iomem *mmio;
64 };
65
66 static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
67         [PWMCLK_PRESCALE_LOW]   = REG_FIELD(STI_PWMCR, 0, 3),
68         [PWMCLK_PRESCALE_HIGH]  = REG_FIELD(STI_PWMCR, 11, 14),
69         [PWM_EN]                = REG_FIELD(STI_PWMCR, 9, 9),
70         [PWM_INT_EN]            = REG_FIELD(STI_INTEN, 0, 0),
71 };
72
73 static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
74 {
75         return container_of(chip, struct sti_pwm_chip, chip);
76 }
77
78 /*
79  * Calculate the prescaler value corresponding to the period.
80  */
81 static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period,
82                                 unsigned int *prescale)
83 {
84         struct sti_pwm_compat_data *cdata = pc->cdata;
85         unsigned long val;
86         unsigned int ps;
87
88         /*
89          * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_count + 1)) - 1
90          */
91         val = NSEC_PER_SEC / pc->clk_rate;
92         val *= cdata->max_pwm_cnt + 1;
93
94         if (period % val) {
95                 return -EINVAL;
96         } else {
97                 ps  = period / val - 1;
98                 if (ps > cdata->max_prescale)
99                         return -EINVAL;
100         }
101         *prescale = ps;
102
103         return 0;
104 }
105
106 /*
107  * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles.
108  * The only way to change the period (apart from changing the PWM input clock)
109  * is to change the PWM clock prescaler.
110  * The prescaler is of 8 bits, so 256 prescaler values and hence
111  * 256 possible period values are supported (for a particular clock rate).
112  * The requested period will be applied only if it matches one of these
113  * 256 values.
114  */
115 static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
116                          int duty_ns, int period_ns)
117 {
118         struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
119         struct sti_pwm_compat_data *cdata = pc->cdata;
120         struct pwm_device *cur = pc->cur;
121         struct device *dev = pc->dev;
122         unsigned int prescale = 0, pwmvalx;
123         int ret;
124         unsigned int ncfg;
125         bool period_same = false;
126
127         ncfg = hweight_long(pc->configured);
128         if (ncfg)
129                 period_same = (period_ns == pwm_get_period(cur));
130
131         /* Allow configuration changes if one of the
132          * following conditions satisfy.
133          * 1. No channels have been configured.
134          * 2. Only one channel has been configured and the new request
135          *    is for the same channel.
136          * 3. Only one channel has been configured and the new request is
137          *    for a new channel and period of the new channel is same as
138          *    the current configured period.
139          * 4. More than one channels are configured and period of the new
140          *    requestis the same as the current period.
141          */
142         if (!ncfg ||
143             ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) ||
144             ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
145             ((ncfg > 1) && period_same)) {
146                 /* Enable clock before writing to PWM registers. */
147                 ret = clk_enable(pc->clk);
148                 if (ret)
149                         return ret;
150
151                 if (!period_same) {
152                         ret = sti_pwm_get_prescale(pc, period_ns, &prescale);
153                         if (ret)
154                                 goto clk_dis;
155
156                         ret =
157                         regmap_field_write(pc->prescale_low,
158                                            prescale & PWM_PRESCALE_LOW_MASK);
159                         if (ret)
160                                 goto clk_dis;
161
162                         ret =
163                         regmap_field_write(pc->prescale_high,
164                                 (prescale & PWM_PRESCALE_HIGH_MASK) >> 4);
165                         if (ret)
166                                 goto clk_dis;
167                 }
168
169                 /*
170                  * When PWMVal == 0, PWM pulse = 1 local clock cycle.
171                  * When PWMVal == max_pwm_count,
172                  * PWM pulse = (max_pwm_count + 1) local cycles,
173                  * that is continuous pulse: signal never goes low.
174                  */
175                 pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns;
176
177                 ret = regmap_write(pc->regmap, STI_DS_REG(pwm->hwpwm), pwmvalx);
178                 if (ret)
179                         goto clk_dis;
180
181                 ret = regmap_field_write(pc->pwm_int_en, 0);
182
183                 set_bit(pwm->hwpwm, &pc->configured);
184                 pc->cur = pwm;
185
186                 dev_dbg(dev, "prescale:%u, period:%i, duty:%i, pwmvalx:%u\n",
187                         prescale, period_ns, duty_ns, pwmvalx);
188         } else {
189                 return -EINVAL;
190         }
191
192 clk_dis:
193         clk_disable(pc->clk);
194         return ret;
195 }
196
197 static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
198 {
199         struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
200         struct device *dev = pc->dev;
201         int ret = 0;
202
203         /*
204          * Since we have a common enable for all PWM channels,
205          * do not enable if already enabled.
206          */
207         mutex_lock(&pc->sti_pwm_lock);
208         if (!pc->en_count) {
209                 ret = clk_enable(pc->clk);
210                 if (ret)
211                         goto out;
212
213                 ret = regmap_field_write(pc->pwm_en, 1);
214                 if (ret) {
215                         dev_err(dev, "failed to enable PWM device:%d\n",
216                                 pwm->hwpwm);
217                         goto out;
218                 }
219         }
220         pc->en_count++;
221 out:
222         mutex_unlock(&pc->sti_pwm_lock);
223         return ret;
224 }
225
226 static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
227 {
228         struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
229
230         mutex_lock(&pc->sti_pwm_lock);
231         if (--pc->en_count) {
232                 mutex_unlock(&pc->sti_pwm_lock);
233                 return;
234         }
235         regmap_field_write(pc->pwm_en, 0);
236
237         clk_disable(pc->clk);
238         mutex_unlock(&pc->sti_pwm_lock);
239 }
240
241 static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
242 {
243         struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
244
245         clear_bit(pwm->hwpwm, &pc->configured);
246 }
247
248 static const struct pwm_ops sti_pwm_ops = {
249         .config = sti_pwm_config,
250         .enable = sti_pwm_enable,
251         .disable = sti_pwm_disable,
252         .free = sti_pwm_free,
253         .owner = THIS_MODULE,
254 };
255
256 static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
257 {
258         struct device *dev = pc->dev;
259         const struct reg_field *reg_fields;
260         struct device_node *np = dev->of_node;
261         struct sti_pwm_compat_data *cdata = pc->cdata;
262         u32 num_chan;
263
264         of_property_read_u32(np, "st,pwm-num-chan", &num_chan);
265         if (num_chan)
266                 cdata->num_chan = num_chan;
267
268         reg_fields = cdata->reg_fields;
269
270         pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap,
271                                         reg_fields[PWMCLK_PRESCALE_LOW]);
272         if (IS_ERR(pc->prescale_low))
273                 return PTR_ERR(pc->prescale_low);
274
275         pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap,
276                                         reg_fields[PWMCLK_PRESCALE_HIGH]);
277         if (IS_ERR(pc->prescale_high))
278                 return PTR_ERR(pc->prescale_high);
279
280         pc->pwm_en = devm_regmap_field_alloc(dev, pc->regmap,
281                                              reg_fields[PWM_EN]);
282         if (IS_ERR(pc->pwm_en))
283                 return PTR_ERR(pc->pwm_en);
284
285         pc->pwm_int_en = devm_regmap_field_alloc(dev, pc->regmap,
286                                                  reg_fields[PWM_INT_EN]);
287         if (IS_ERR(pc->pwm_int_en))
288                 return PTR_ERR(pc->pwm_int_en);
289
290         return 0;
291 }
292
293 static const struct regmap_config sti_pwm_regmap_config = {
294         .reg_bits = 32,
295         .val_bits = 32,
296         .reg_stride = 4,
297 };
298
299 static int sti_pwm_probe(struct platform_device *pdev)
300 {
301         struct device *dev = &pdev->dev;
302         struct sti_pwm_compat_data *cdata;
303         struct sti_pwm_chip *pc;
304         struct resource *res;
305         int ret;
306
307         pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
308         if (!pc)
309                 return -ENOMEM;
310
311         cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL);
312         if (!cdata)
313                 return -ENOMEM;
314
315         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
316
317         pc->mmio = devm_ioremap_resource(dev, res);
318         if (IS_ERR(pc->mmio))
319                 return PTR_ERR(pc->mmio);
320
321         pc->regmap = devm_regmap_init_mmio(dev, pc->mmio,
322                                            &sti_pwm_regmap_config);
323         if (IS_ERR(pc->regmap))
324                 return PTR_ERR(pc->regmap);
325
326         /*
327          * Setup PWM data with default values: some values could be replaced
328          * with specific ones provided from Device Tree.
329          */
330         cdata->reg_fields   = &sti_pwm_regfields[0];
331         cdata->max_prescale = 0xff;
332         cdata->max_pwm_cnt  = 255;
333         cdata->num_chan     = 1;
334
335         pc->cdata = cdata;
336         pc->dev = dev;
337         pc->en_count = 0;
338         mutex_init(&pc->sti_pwm_lock);
339
340         ret = sti_pwm_probe_dt(pc);
341         if (ret)
342                 return ret;
343
344         pc->clk = of_clk_get_by_name(dev->of_node, "pwm");
345         if (IS_ERR(pc->clk)) {
346                 dev_err(dev, "failed to get PWM clock\n");
347                 return PTR_ERR(pc->clk);
348         }
349
350         pc->clk_rate = clk_get_rate(pc->clk);
351         if (!pc->clk_rate) {
352                 dev_err(dev, "failed to get clock rate\n");
353                 return -EINVAL;
354         }
355
356         ret = clk_prepare(pc->clk);
357         if (ret) {
358                 dev_err(dev, "failed to prepare clock\n");
359                 return ret;
360         }
361
362         pc->chip.dev = dev;
363         pc->chip.ops = &sti_pwm_ops;
364         pc->chip.base = -1;
365         pc->chip.npwm = pc->cdata->num_chan;
366         pc->chip.can_sleep = true;
367
368         ret = pwmchip_add(&pc->chip);
369         if (ret < 0) {
370                 clk_unprepare(pc->clk);
371                 return ret;
372         }
373
374         platform_set_drvdata(pdev, pc);
375
376         return 0;
377 }
378
379 static int sti_pwm_remove(struct platform_device *pdev)
380 {
381         struct sti_pwm_chip *pc = platform_get_drvdata(pdev);
382         unsigned int i;
383
384         for (i = 0; i < pc->cdata->num_chan; i++)
385                 pwm_disable(&pc->chip.pwms[i]);
386
387         clk_unprepare(pc->clk);
388
389         return pwmchip_remove(&pc->chip);
390 }
391
392 static const struct of_device_id sti_pwm_of_match[] = {
393         { .compatible = "st,sti-pwm", },
394         { /* sentinel */ }
395 };
396 MODULE_DEVICE_TABLE(of, sti_pwm_of_match);
397
398 static struct platform_driver sti_pwm_driver = {
399         .driver = {
400                 .name = "sti-pwm",
401                 .of_match_table = sti_pwm_of_match,
402         },
403         .probe = sti_pwm_probe,
404         .remove = sti_pwm_remove,
405 };
406 module_platform_driver(sti_pwm_driver);
407
408 MODULE_AUTHOR("Ajit Pal Singh <ajitpal.singh@st.com>");
409 MODULE_DESCRIPTION("STMicroelectronics ST PWM driver");
410 MODULE_LICENSE("GPL");