These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / drivers / power / bq25890_charger.c
1 /*
2  * TI BQ25890 charger driver
3  *
4  * Copyright (C) 2015 Intel Corporation
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  */
17
18 #include <linux/module.h>
19 #include <linux/i2c.h>
20 #include <linux/power_supply.h>
21 #include <linux/regmap.h>
22 #include <linux/types.h>
23 #include <linux/gpio/consumer.h>
24 #include <linux/interrupt.h>
25 #include <linux/delay.h>
26 #include <linux/usb/phy.h>
27
28 #include <linux/acpi.h>
29 #include <linux/of.h>
30
31 #define BQ25890_MANUFACTURER            "Texas Instruments"
32 #define BQ25890_IRQ_PIN                 "bq25890_irq"
33
34 #define BQ25890_ID                      3
35
36 enum bq25890_fields {
37         F_EN_HIZ, F_EN_ILIM, F_IILIM,                                /* Reg00 */
38         F_BHOT, F_BCOLD, F_VINDPM_OFS,                               /* Reg01 */
39         F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN,
40         F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN,          /* Reg02 */
41         F_BAT_LOAD_EN, F_WD_RST, F_OTG_CFG, F_CHG_CFG, F_SYSVMIN,    /* Reg03 */
42         F_PUMPX_EN, F_ICHG,                                          /* Reg04 */
43         F_IPRECHG, F_ITERM,                                          /* Reg05 */
44         F_VREG, F_BATLOWV, F_VRECHG,                                 /* Reg06 */
45         F_TERM_EN, F_STAT_DIS, F_WD, F_TMR_EN, F_CHG_TMR,
46         F_JEITA_ISET,                                                /* Reg07 */
47         F_BATCMP, F_VCLAMP, F_TREG,                                  /* Reg08 */
48         F_FORCE_ICO, F_TMR2X_EN, F_BATFET_DIS, F_JEITA_VSET,
49         F_BATFET_DLY, F_BATFET_RST_EN, F_PUMPX_UP, F_PUMPX_DN,       /* Reg09 */
50         F_BOOSTV, F_BOOSTI,                                          /* Reg0A */
51         F_VBUS_STAT, F_CHG_STAT, F_PG_STAT, F_SDP_STAT, F_VSYS_STAT, /* Reg0B */
52         F_WD_FAULT, F_BOOST_FAULT, F_CHG_FAULT, F_BAT_FAULT,
53         F_NTC_FAULT,                                                 /* Reg0C */
54         F_FORCE_VINDPM, F_VINDPM,                                    /* Reg0D */
55         F_THERM_STAT, F_BATV,                                        /* Reg0E */
56         F_SYSV,                                                      /* Reg0F */
57         F_TSPCT,                                                     /* Reg10 */
58         F_VBUS_GD, F_VBUSV,                                          /* Reg11 */
59         F_ICHGR,                                                     /* Reg12 */
60         F_VDPM_STAT, F_IDPM_STAT, F_IDPM_LIM,                        /* Reg13 */
61         F_REG_RST, F_ICO_OPTIMIZED, F_PN, F_TS_PROFILE, F_DEV_REV,   /* Reg14 */
62
63         F_MAX_FIELDS
64 };
65
66 /* initial field values, converted to register values */
67 struct bq25890_init_data {
68         u8 ichg;        /* charge current               */
69         u8 vreg;        /* regulation voltage           */
70         u8 iterm;       /* termination current          */
71         u8 iprechg;     /* precharge current            */
72         u8 sysvmin;     /* minimum system voltage limit */
73         u8 boostv;      /* boost regulation voltage     */
74         u8 boosti;      /* boost current limit          */
75         u8 boostf;      /* boost frequency              */
76         u8 ilim_en;     /* enable ILIM pin              */
77         u8 treg;        /* thermal regulation threshold */
78 };
79
80 struct bq25890_state {
81         u8 online;
82         u8 chrg_status;
83         u8 chrg_fault;
84         u8 vsys_status;
85         u8 boost_fault;
86         u8 bat_fault;
87 };
88
89 struct bq25890_device {
90         struct i2c_client *client;
91         struct device *dev;
92         struct power_supply *charger;
93
94         struct usb_phy *usb_phy;
95         struct notifier_block usb_nb;
96         struct work_struct usb_work;
97         unsigned long usb_event;
98
99         struct regmap *rmap;
100         struct regmap_field *rmap_fields[F_MAX_FIELDS];
101
102         int chip_id;
103         struct bq25890_init_data init_data;
104         struct bq25890_state state;
105
106         struct mutex lock; /* protect state data */
107 };
108
109 static const struct regmap_range bq25890_readonly_reg_ranges[] = {
110         regmap_reg_range(0x0b, 0x0c),
111         regmap_reg_range(0x0e, 0x13),
112 };
113
114 static const struct regmap_access_table bq25890_writeable_regs = {
115         .no_ranges = bq25890_readonly_reg_ranges,
116         .n_no_ranges = ARRAY_SIZE(bq25890_readonly_reg_ranges),
117 };
118
119 static const struct regmap_range bq25890_volatile_reg_ranges[] = {
120         regmap_reg_range(0x00, 0x00),
121         regmap_reg_range(0x09, 0x09),
122         regmap_reg_range(0x0b, 0x0c),
123         regmap_reg_range(0x0e, 0x14),
124 };
125
126 static const struct regmap_access_table bq25890_volatile_regs = {
127         .yes_ranges = bq25890_volatile_reg_ranges,
128         .n_yes_ranges = ARRAY_SIZE(bq25890_volatile_reg_ranges),
129 };
130
131 static const struct regmap_config bq25890_regmap_config = {
132         .reg_bits = 8,
133         .val_bits = 8,
134
135         .max_register = 0x14,
136         .cache_type = REGCACHE_RBTREE,
137
138         .wr_table = &bq25890_writeable_regs,
139         .volatile_table = &bq25890_volatile_regs,
140 };
141
142 static const struct reg_field bq25890_reg_fields[] = {
143         /* REG00 */
144         [F_EN_HIZ]              = REG_FIELD(0x00, 7, 7),
145         [F_EN_ILIM]             = REG_FIELD(0x00, 6, 6),
146         [F_IILIM]               = REG_FIELD(0x00, 0, 5),
147         /* REG01 */
148         [F_BHOT]                = REG_FIELD(0x01, 6, 7),
149         [F_BCOLD]               = REG_FIELD(0x01, 5, 5),
150         [F_VINDPM_OFS]          = REG_FIELD(0x01, 0, 4),
151         /* REG02 */
152         [F_CONV_START]          = REG_FIELD(0x02, 7, 7),
153         [F_CONV_RATE]           = REG_FIELD(0x02, 6, 6),
154         [F_BOOSTF]              = REG_FIELD(0x02, 5, 5),
155         [F_ICO_EN]              = REG_FIELD(0x02, 4, 4),
156         [F_HVDCP_EN]            = REG_FIELD(0x02, 3, 3),
157         [F_MAXC_EN]             = REG_FIELD(0x02, 2, 2),
158         [F_FORCE_DPM]           = REG_FIELD(0x02, 1, 1),
159         [F_AUTO_DPDM_EN]        = REG_FIELD(0x02, 0, 0),
160         /* REG03 */
161         [F_BAT_LOAD_EN]         = REG_FIELD(0x03, 7, 7),
162         [F_WD_RST]              = REG_FIELD(0x03, 6, 6),
163         [F_OTG_CFG]             = REG_FIELD(0x03, 5, 5),
164         [F_CHG_CFG]             = REG_FIELD(0x03, 4, 4),
165         [F_SYSVMIN]             = REG_FIELD(0x03, 1, 3),
166         /* REG04 */
167         [F_PUMPX_EN]            = REG_FIELD(0x04, 7, 7),
168         [F_ICHG]                = REG_FIELD(0x04, 0, 6),
169         /* REG05 */
170         [F_IPRECHG]             = REG_FIELD(0x05, 4, 7),
171         [F_ITERM]               = REG_FIELD(0x05, 0, 3),
172         /* REG06 */
173         [F_VREG]                = REG_FIELD(0x06, 2, 7),
174         [F_BATLOWV]             = REG_FIELD(0x06, 1, 1),
175         [F_VRECHG]              = REG_FIELD(0x06, 0, 0),
176         /* REG07 */
177         [F_TERM_EN]             = REG_FIELD(0x07, 7, 7),
178         [F_STAT_DIS]            = REG_FIELD(0x07, 6, 6),
179         [F_WD]                  = REG_FIELD(0x07, 4, 5),
180         [F_TMR_EN]              = REG_FIELD(0x07, 3, 3),
181         [F_CHG_TMR]             = REG_FIELD(0x07, 1, 2),
182         [F_JEITA_ISET]          = REG_FIELD(0x07, 0, 0),
183         /* REG08 */
184         [F_BATCMP]              = REG_FIELD(0x08, 6, 7),
185         [F_VCLAMP]              = REG_FIELD(0x08, 2, 4),
186         [F_TREG]                = REG_FIELD(0x08, 0, 1),
187         /* REG09 */
188         [F_FORCE_ICO]           = REG_FIELD(0x09, 7, 7),
189         [F_TMR2X_EN]            = REG_FIELD(0x09, 6, 6),
190         [F_BATFET_DIS]          = REG_FIELD(0x09, 5, 5),
191         [F_JEITA_VSET]          = REG_FIELD(0x09, 4, 4),
192         [F_BATFET_DLY]          = REG_FIELD(0x09, 3, 3),
193         [F_BATFET_RST_EN]       = REG_FIELD(0x09, 2, 2),
194         [F_PUMPX_UP]            = REG_FIELD(0x09, 1, 1),
195         [F_PUMPX_DN]            = REG_FIELD(0x09, 0, 0),
196         /* REG0A */
197         [F_BOOSTV]              = REG_FIELD(0x0A, 4, 7),
198         [F_BOOSTI]              = REG_FIELD(0x0A, 0, 2),
199         /* REG0B */
200         [F_VBUS_STAT]           = REG_FIELD(0x0B, 5, 7),
201         [F_CHG_STAT]            = REG_FIELD(0x0B, 3, 4),
202         [F_PG_STAT]             = REG_FIELD(0x0B, 2, 2),
203         [F_SDP_STAT]            = REG_FIELD(0x0B, 1, 1),
204         [F_VSYS_STAT]           = REG_FIELD(0x0B, 0, 0),
205         /* REG0C */
206         [F_WD_FAULT]            = REG_FIELD(0x0C, 7, 7),
207         [F_BOOST_FAULT]         = REG_FIELD(0x0C, 6, 6),
208         [F_CHG_FAULT]           = REG_FIELD(0x0C, 4, 5),
209         [F_BAT_FAULT]           = REG_FIELD(0x0C, 3, 3),
210         [F_NTC_FAULT]           = REG_FIELD(0x0C, 0, 2),
211         /* REG0D */
212         [F_FORCE_VINDPM]        = REG_FIELD(0x0D, 7, 7),
213         [F_VINDPM]              = REG_FIELD(0x0D, 0, 6),
214         /* REG0E */
215         [F_THERM_STAT]          = REG_FIELD(0x0E, 7, 7),
216         [F_BATV]                = REG_FIELD(0x0E, 0, 6),
217         /* REG0F */
218         [F_SYSV]                = REG_FIELD(0x0F, 0, 6),
219         /* REG10 */
220         [F_TSPCT]               = REG_FIELD(0x10, 0, 6),
221         /* REG11 */
222         [F_VBUS_GD]             = REG_FIELD(0x11, 7, 7),
223         [F_VBUSV]               = REG_FIELD(0x11, 0, 6),
224         /* REG12 */
225         [F_ICHGR]               = REG_FIELD(0x12, 0, 6),
226         /* REG13 */
227         [F_VDPM_STAT]           = REG_FIELD(0x13, 7, 7),
228         [F_IDPM_STAT]           = REG_FIELD(0x13, 6, 6),
229         [F_IDPM_LIM]            = REG_FIELD(0x13, 0, 5),
230         /* REG14 */
231         [F_REG_RST]             = REG_FIELD(0x14, 7, 7),
232         [F_ICO_OPTIMIZED]       = REG_FIELD(0x14, 6, 6),
233         [F_PN]                  = REG_FIELD(0x14, 3, 5),
234         [F_TS_PROFILE]          = REG_FIELD(0x14, 2, 2),
235         [F_DEV_REV]             = REG_FIELD(0x14, 0, 1)
236 };
237
238 /*
239  * Most of the val -> idx conversions can be computed, given the minimum,
240  * maximum and the step between values. For the rest of conversions, we use
241  * lookup tables.
242  */
243 enum bq25890_table_ids {
244         /* range tables */
245         TBL_ICHG,
246         TBL_ITERM,
247         TBL_IPRECHG,
248         TBL_VREG,
249         TBL_BATCMP,
250         TBL_VCLAMP,
251         TBL_BOOSTV,
252         TBL_SYSVMIN,
253
254         /* lookup tables */
255         TBL_TREG,
256         TBL_BOOSTI,
257 };
258
259 /* Thermal Regulation Threshold lookup table, in degrees Celsius */
260 static const u32 bq25890_treg_tbl[] = { 60, 80, 100, 120 };
261
262 #define BQ25890_TREG_TBL_SIZE           ARRAY_SIZE(bq25890_treg_tbl)
263
264 /* Boost mode current limit lookup table, in uA */
265 static const u32 bq25890_boosti_tbl[] = {
266         500000, 700000, 1100000, 1300000, 1600000, 1800000, 2100000, 2400000
267 };
268
269 #define BQ25890_BOOSTI_TBL_SIZE         ARRAY_SIZE(bq25890_boosti_tbl)
270
271 struct bq25890_range {
272         u32 min;
273         u32 max;
274         u32 step;
275 };
276
277 struct bq25890_lookup {
278         const u32 *tbl;
279         u32 size;
280 };
281
282 static const union {
283         struct bq25890_range  rt;
284         struct bq25890_lookup lt;
285 } bq25890_tables[] = {
286         /* range tables */
287         [TBL_ICHG] =    { .rt = {0,       5056000, 64000} },     /* uA */
288         [TBL_ITERM] =   { .rt = {64000,   1024000, 64000} },     /* uA */
289         [TBL_VREG] =    { .rt = {3840000, 4608000, 16000} },     /* uV */
290         [TBL_BATCMP] =  { .rt = {0,       140,     20} },        /* mOhm */
291         [TBL_VCLAMP] =  { .rt = {0,       224000,  32000} },     /* uV */
292         [TBL_BOOSTV] =  { .rt = {4550000, 5510000, 64000} },     /* uV */
293         [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} },    /* uV */
294
295         /* lookup tables */
296         [TBL_TREG] =    { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
297         [TBL_BOOSTI] =  { .lt = {bq25890_boosti_tbl, BQ25890_BOOSTI_TBL_SIZE} }
298 };
299
300 static int bq25890_field_read(struct bq25890_device *bq,
301                               enum bq25890_fields field_id)
302 {
303         int ret;
304         int val;
305
306         ret = regmap_field_read(bq->rmap_fields[field_id], &val);
307         if (ret < 0)
308                 return ret;
309
310         return val;
311 }
312
313 static int bq25890_field_write(struct bq25890_device *bq,
314                                enum bq25890_fields field_id, u8 val)
315 {
316         return regmap_field_write(bq->rmap_fields[field_id], val);
317 }
318
319 static u8 bq25890_find_idx(u32 value, enum bq25890_table_ids id)
320 {
321         u8 idx;
322
323         if (id >= TBL_TREG) {
324                 const u32 *tbl = bq25890_tables[id].lt.tbl;
325                 u32 tbl_size = bq25890_tables[id].lt.size;
326
327                 for (idx = 1; idx < tbl_size && tbl[idx] <= value; idx++)
328                         ;
329         } else {
330                 const struct bq25890_range *rtbl = &bq25890_tables[id].rt;
331                 u8 rtbl_size;
332
333                 rtbl_size = (rtbl->max - rtbl->min) / rtbl->step + 1;
334
335                 for (idx = 1;
336                      idx < rtbl_size && (idx * rtbl->step + rtbl->min <= value);
337                      idx++)
338                         ;
339         }
340
341         return idx - 1;
342 }
343
344 static u32 bq25890_find_val(u8 idx, enum bq25890_table_ids id)
345 {
346         const struct bq25890_range *rtbl;
347
348         /* lookup table? */
349         if (id >= TBL_TREG)
350                 return bq25890_tables[id].lt.tbl[idx];
351
352         /* range table */
353         rtbl = &bq25890_tables[id].rt;
354
355         return (rtbl->min + idx * rtbl->step);
356 }
357
358 enum bq25890_status {
359         STATUS_NOT_CHARGING,
360         STATUS_PRE_CHARGING,
361         STATUS_FAST_CHARGING,
362         STATUS_TERMINATION_DONE,
363 };
364
365 enum bq25890_chrg_fault {
366         CHRG_FAULT_NORMAL,
367         CHRG_FAULT_INPUT,
368         CHRG_FAULT_THERMAL_SHUTDOWN,
369         CHRG_FAULT_TIMER_EXPIRED,
370 };
371
372 static int bq25890_power_supply_get_property(struct power_supply *psy,
373                                              enum power_supply_property psp,
374                                              union power_supply_propval *val)
375 {
376         int ret;
377         struct bq25890_device *bq = power_supply_get_drvdata(psy);
378         struct bq25890_state state;
379
380         mutex_lock(&bq->lock);
381         state = bq->state;
382         mutex_unlock(&bq->lock);
383
384         switch (psp) {
385         case POWER_SUPPLY_PROP_STATUS:
386                 if (!state.online)
387                         val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
388                 else if (state.chrg_status == STATUS_NOT_CHARGING)
389                         val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
390                 else if (state.chrg_status == STATUS_PRE_CHARGING ||
391                          state.chrg_status == STATUS_FAST_CHARGING)
392                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
393                 else if (state.chrg_status == STATUS_TERMINATION_DONE)
394                         val->intval = POWER_SUPPLY_STATUS_FULL;
395                 else
396                         val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
397
398                 break;
399
400         case POWER_SUPPLY_PROP_MANUFACTURER:
401                 val->strval = BQ25890_MANUFACTURER;
402                 break;
403
404         case POWER_SUPPLY_PROP_ONLINE:
405                 val->intval = state.online;
406                 break;
407
408         case POWER_SUPPLY_PROP_HEALTH:
409                 if (!state.chrg_fault && !state.bat_fault && !state.boost_fault)
410                         val->intval = POWER_SUPPLY_HEALTH_GOOD;
411                 else if (state.bat_fault)
412                         val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
413                 else if (state.chrg_fault == CHRG_FAULT_TIMER_EXPIRED)
414                         val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
415                 else if (state.chrg_fault == CHRG_FAULT_THERMAL_SHUTDOWN)
416                         val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
417                 else
418                         val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
419                 break;
420
421         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
422                 ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */
423                 if (ret < 0)
424                         return ret;
425
426                 /* converted_val = ADC_val * 50mA (table 10.3.19) */
427                 val->intval = ret * 50000;
428                 break;
429
430         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
431                 val->intval = bq25890_tables[TBL_ICHG].rt.max;
432                 break;
433
434         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
435                 if (!state.online) {
436                         val->intval = 0;
437                         break;
438                 }
439
440                 ret = bq25890_field_read(bq, F_BATV); /* read measured value */
441                 if (ret < 0)
442                         return ret;
443
444                 /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
445                 val->intval = 2304000 + ret * 20000;
446                 break;
447
448         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
449                 val->intval = bq25890_tables[TBL_VREG].rt.max;
450                 break;
451
452         case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
453                 val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM);
454                 break;
455
456         default:
457                 return -EINVAL;
458         }
459
460         return 0;
461 }
462
463 static int bq25890_get_chip_state(struct bq25890_device *bq,
464                                   struct bq25890_state *state)
465 {
466         int i, ret;
467
468         struct {
469                 enum bq25890_fields id;
470                 u8 *data;
471         } state_fields[] = {
472                 {F_CHG_STAT,    &state->chrg_status},
473                 {F_PG_STAT,     &state->online},
474                 {F_VSYS_STAT,   &state->vsys_status},
475                 {F_BOOST_FAULT, &state->boost_fault},
476                 {F_BAT_FAULT,   &state->bat_fault},
477                 {F_CHG_FAULT,   &state->chrg_fault}
478         };
479
480         for (i = 0; i < ARRAY_SIZE(state_fields); i++) {
481                 ret = bq25890_field_read(bq, state_fields[i].id);
482                 if (ret < 0)
483                         return ret;
484
485                 *state_fields[i].data = ret;
486         }
487
488         dev_dbg(bq->dev, "S:CHG/PG/VSYS=%d/%d/%d, F:CHG/BOOST/BAT=%d/%d/%d\n",
489                 state->chrg_status, state->online, state->vsys_status,
490                 state->chrg_fault, state->boost_fault, state->bat_fault);
491
492         return 0;
493 }
494
495 static bool bq25890_state_changed(struct bq25890_device *bq,
496                                   struct bq25890_state *new_state)
497 {
498         struct bq25890_state old_state;
499
500         mutex_lock(&bq->lock);
501         old_state = bq->state;
502         mutex_unlock(&bq->lock);
503
504         return (old_state.chrg_status != new_state->chrg_status ||
505                 old_state.chrg_fault != new_state->chrg_fault   ||
506                 old_state.online != new_state->online           ||
507                 old_state.bat_fault != new_state->bat_fault     ||
508                 old_state.boost_fault != new_state->boost_fault ||
509                 old_state.vsys_status != new_state->vsys_status);
510 }
511
512 static void bq25890_handle_state_change(struct bq25890_device *bq,
513                                         struct bq25890_state *new_state)
514 {
515         int ret;
516         struct bq25890_state old_state;
517
518         mutex_lock(&bq->lock);
519         old_state = bq->state;
520         mutex_unlock(&bq->lock);
521
522         if (!new_state->online) {                            /* power removed */
523                 /* disable ADC */
524                 ret = bq25890_field_write(bq, F_CONV_START, 0);
525                 if (ret < 0)
526                         goto error;
527         } else if (!old_state.online) {                     /* power inserted */
528                 /* enable ADC, to have control of charge current/voltage */
529                 ret = bq25890_field_write(bq, F_CONV_START, 1);
530                 if (ret < 0)
531                         goto error;
532         }
533
534         return;
535
536 error:
537         dev_err(bq->dev, "Error communicating with the chip.\n");
538 }
539
540 static irqreturn_t bq25890_irq_handler_thread(int irq, void *private)
541 {
542         struct bq25890_device *bq = private;
543         int ret;
544         struct bq25890_state state;
545
546         ret = bq25890_get_chip_state(bq, &state);
547         if (ret < 0)
548                 goto handled;
549
550         if (!bq25890_state_changed(bq, &state))
551                 goto handled;
552
553         bq25890_handle_state_change(bq, &state);
554
555         mutex_lock(&bq->lock);
556         bq->state = state;
557         mutex_unlock(&bq->lock);
558
559         power_supply_changed(bq->charger);
560
561 handled:
562         return IRQ_HANDLED;
563 }
564
565 static int bq25890_chip_reset(struct bq25890_device *bq)
566 {
567         int ret;
568         int rst_check_counter = 10;
569
570         ret = bq25890_field_write(bq, F_REG_RST, 1);
571         if (ret < 0)
572                 return ret;
573
574         do {
575                 ret = bq25890_field_read(bq, F_REG_RST);
576                 if (ret < 0)
577                         return ret;
578
579                 usleep_range(5, 10);
580         } while (ret == 1 && --rst_check_counter);
581
582         if (!rst_check_counter)
583                 return -ETIMEDOUT;
584
585         return 0;
586 }
587
588 static int bq25890_hw_init(struct bq25890_device *bq)
589 {
590         int ret;
591         int i;
592         struct bq25890_state state;
593
594         const struct {
595                 enum bq25890_fields id;
596                 u32 value;
597         } init_data[] = {
598                 {F_ICHG,         bq->init_data.ichg},
599                 {F_VREG,         bq->init_data.vreg},
600                 {F_ITERM,        bq->init_data.iterm},
601                 {F_IPRECHG,      bq->init_data.iprechg},
602                 {F_SYSVMIN,      bq->init_data.sysvmin},
603                 {F_BOOSTV,       bq->init_data.boostv},
604                 {F_BOOSTI,       bq->init_data.boosti},
605                 {F_BOOSTF,       bq->init_data.boostf},
606                 {F_EN_ILIM,      bq->init_data.ilim_en},
607                 {F_TREG,         bq->init_data.treg}
608         };
609
610         ret = bq25890_chip_reset(bq);
611         if (ret < 0)
612                 return ret;
613
614         /* disable watchdog */
615         ret = bq25890_field_write(bq, F_WD, 0);
616         if (ret < 0)
617                 return ret;
618
619         /* initialize currents/voltages and other parameters */
620         for (i = 0; i < ARRAY_SIZE(init_data); i++) {
621                 ret = bq25890_field_write(bq, init_data[i].id,
622                                           init_data[i].value);
623                 if (ret < 0)
624                         return ret;
625         }
626
627         /* Configure ADC for continuous conversions. This does not enable it. */
628         ret = bq25890_field_write(bq, F_CONV_RATE, 1);
629         if (ret < 0)
630                 return ret;
631
632         ret = bq25890_get_chip_state(bq, &state);
633         if (ret < 0)
634                 return ret;
635
636         mutex_lock(&bq->lock);
637         bq->state = state;
638         mutex_unlock(&bq->lock);
639
640         return 0;
641 }
642
643 static enum power_supply_property bq25890_power_supply_props[] = {
644         POWER_SUPPLY_PROP_MANUFACTURER,
645         POWER_SUPPLY_PROP_STATUS,
646         POWER_SUPPLY_PROP_ONLINE,
647         POWER_SUPPLY_PROP_HEALTH,
648         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
649         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
650         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
651         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
652         POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
653 };
654
655 static char *bq25890_charger_supplied_to[] = {
656         "main-battery",
657 };
658
659 static const struct power_supply_desc bq25890_power_supply_desc = {
660         .name = "bq25890-charger",
661         .type = POWER_SUPPLY_TYPE_USB,
662         .properties = bq25890_power_supply_props,
663         .num_properties = ARRAY_SIZE(bq25890_power_supply_props),
664         .get_property = bq25890_power_supply_get_property,
665 };
666
667 static int bq25890_power_supply_init(struct bq25890_device *bq)
668 {
669         struct power_supply_config psy_cfg = { .drv_data = bq, };
670
671         psy_cfg.supplied_to = bq25890_charger_supplied_to;
672         psy_cfg.num_supplicants = ARRAY_SIZE(bq25890_charger_supplied_to);
673
674         bq->charger = power_supply_register(bq->dev, &bq25890_power_supply_desc,
675                                             &psy_cfg);
676
677         return PTR_ERR_OR_ZERO(bq->charger);
678 }
679
680 static void bq25890_usb_work(struct work_struct *data)
681 {
682         int ret;
683         struct bq25890_device *bq =
684                         container_of(data, struct bq25890_device, usb_work);
685
686         switch (bq->usb_event) {
687         case USB_EVENT_ID:
688                 /* Enable boost mode */
689                 ret = bq25890_field_write(bq, F_OTG_CFG, 1);
690                 if (ret < 0)
691                         goto error;
692                 break;
693
694         case USB_EVENT_NONE:
695                 /* Disable boost mode */
696                 ret = bq25890_field_write(bq, F_OTG_CFG, 0);
697                 if (ret < 0)
698                         goto error;
699
700                 power_supply_changed(bq->charger);
701                 break;
702         }
703
704         return;
705
706 error:
707         dev_err(bq->dev, "Error switching to boost/charger mode.\n");
708 }
709
710 static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val,
711                                 void *priv)
712 {
713         struct bq25890_device *bq =
714                         container_of(nb, struct bq25890_device, usb_nb);
715
716         bq->usb_event = val;
717         queue_work(system_power_efficient_wq, &bq->usb_work);
718
719         return NOTIFY_OK;
720 }
721
722 static int bq25890_irq_probe(struct bq25890_device *bq)
723 {
724         struct gpio_desc *irq;
725
726         irq = devm_gpiod_get_index(bq->dev, BQ25890_IRQ_PIN, 0, GPIOD_IN);
727         if (IS_ERR(irq)) {
728                 dev_err(bq->dev, "Could not probe irq pin.\n");
729                 return PTR_ERR(irq);
730         }
731
732         return gpiod_to_irq(irq);
733 }
734
735 static int bq25890_fw_read_u32_props(struct bq25890_device *bq)
736 {
737         int ret;
738         u32 property;
739         int i;
740         struct bq25890_init_data *init = &bq->init_data;
741         struct {
742                 char *name;
743                 bool optional;
744                 enum bq25890_table_ids tbl_id;
745                 u8 *conv_data; /* holds converted value from given property */
746         } props[] = {
747                 /* required properties */
748                 {"ti,charge-current", false, TBL_ICHG, &init->ichg},
749                 {"ti,battery-regulation-voltage", false, TBL_VREG, &init->vreg},
750                 {"ti,termination-current", false, TBL_ITERM, &init->iterm},
751                 {"ti,precharge-current", false, TBL_ITERM, &init->iprechg},
752                 {"ti,minimum-sys-voltage", false, TBL_SYSVMIN, &init->sysvmin},
753                 {"ti,boost-voltage", false, TBL_BOOSTV, &init->boostv},
754                 {"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti},
755
756                 /* optional properties */
757                 {"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg}
758         };
759
760         /* initialize data for optional properties */
761         init->treg = 3; /* 120 degrees Celsius */
762
763         for (i = 0; i < ARRAY_SIZE(props); i++) {
764                 ret = device_property_read_u32(bq->dev, props[i].name,
765                                                &property);
766                 if (ret < 0) {
767                         if (props[i].optional)
768                                 continue;
769
770                         return ret;
771                 }
772
773                 *props[i].conv_data = bq25890_find_idx(property,
774                                                        props[i].tbl_id);
775         }
776
777         return 0;
778 }
779
780 static int bq25890_fw_probe(struct bq25890_device *bq)
781 {
782         int ret;
783         struct bq25890_init_data *init = &bq->init_data;
784
785         ret = bq25890_fw_read_u32_props(bq);
786         if (ret < 0)
787                 return ret;
788
789         init->ilim_en = device_property_read_bool(bq->dev, "ti,use-ilim-pin");
790         init->boostf = device_property_read_bool(bq->dev, "ti,boost-low-freq");
791
792         return 0;
793 }
794
795 static int bq25890_probe(struct i2c_client *client,
796                          const struct i2c_device_id *id)
797 {
798         struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
799         struct device *dev = &client->dev;
800         struct bq25890_device *bq;
801         int ret;
802         int i;
803
804         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
805                 dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
806                 return -ENODEV;
807         }
808
809         bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
810         if (!bq)
811                 return -ENOMEM;
812
813         bq->client = client;
814         bq->dev = dev;
815
816         mutex_init(&bq->lock);
817
818         bq->rmap = devm_regmap_init_i2c(client, &bq25890_regmap_config);
819         if (IS_ERR(bq->rmap)) {
820                 dev_err(dev, "failed to allocate register map\n");
821                 return PTR_ERR(bq->rmap);
822         }
823
824         for (i = 0; i < ARRAY_SIZE(bq25890_reg_fields); i++) {
825                 const struct reg_field *reg_fields = bq25890_reg_fields;
826
827                 bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
828                                                              reg_fields[i]);
829                 if (IS_ERR(bq->rmap_fields[i])) {
830                         dev_err(dev, "cannot allocate regmap field\n");
831                         return PTR_ERR(bq->rmap_fields[i]);
832                 }
833         }
834
835         i2c_set_clientdata(client, bq);
836
837         bq->chip_id = bq25890_field_read(bq, F_PN);
838         if (bq->chip_id < 0) {
839                 dev_err(dev, "Cannot read chip ID.\n");
840                 return bq->chip_id;
841         }
842
843         if (bq->chip_id != BQ25890_ID) {
844                 dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id);
845                 return -ENODEV;
846         }
847
848         if (!dev->platform_data) {
849                 ret = bq25890_fw_probe(bq);
850                 if (ret < 0) {
851                         dev_err(dev, "Cannot read device properties.\n");
852                         return ret;
853                 }
854         } else {
855                 return -ENODEV;
856         }
857
858         ret = bq25890_hw_init(bq);
859         if (ret < 0) {
860                 dev_err(dev, "Cannot initialize the chip.\n");
861                 return ret;
862         }
863
864         if (client->irq <= 0)
865                 client->irq = bq25890_irq_probe(bq);
866
867         if (client->irq < 0) {
868                 dev_err(dev, "No irq resource found.\n");
869                 return client->irq;
870         }
871
872         /* OTG reporting */
873         bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
874         if (!IS_ERR_OR_NULL(bq->usb_phy)) {
875                 INIT_WORK(&bq->usb_work, bq25890_usb_work);
876                 bq->usb_nb.notifier_call = bq25890_usb_notifier;
877                 usb_register_notifier(bq->usb_phy, &bq->usb_nb);
878         }
879
880         ret = devm_request_threaded_irq(dev, client->irq, NULL,
881                                         bq25890_irq_handler_thread,
882                                         IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
883                                         BQ25890_IRQ_PIN, bq);
884         if (ret)
885                 goto irq_fail;
886
887         ret = bq25890_power_supply_init(bq);
888         if (ret < 0) {
889                 dev_err(dev, "Failed to register power supply\n");
890                 goto irq_fail;
891         }
892
893         return 0;
894
895 irq_fail:
896         if (!IS_ERR_OR_NULL(bq->usb_phy))
897                 usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
898
899         return ret;
900 }
901
902 static int bq25890_remove(struct i2c_client *client)
903 {
904         struct bq25890_device *bq = i2c_get_clientdata(client);
905
906         power_supply_unregister(bq->charger);
907
908         if (!IS_ERR_OR_NULL(bq->usb_phy))
909                 usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
910
911         /* reset all registers to default values */
912         bq25890_chip_reset(bq);
913
914         return 0;
915 }
916
917 #ifdef CONFIG_PM_SLEEP
918 static int bq25890_suspend(struct device *dev)
919 {
920         struct bq25890_device *bq = dev_get_drvdata(dev);
921
922         /*
923          * If charger is removed, while in suspend, make sure ADC is diabled
924          * since it consumes slightly more power.
925          */
926         return bq25890_field_write(bq, F_CONV_START, 0);
927 }
928
929 static int bq25890_resume(struct device *dev)
930 {
931         int ret;
932         struct bq25890_state state;
933         struct bq25890_device *bq = dev_get_drvdata(dev);
934
935         ret = bq25890_get_chip_state(bq, &state);
936         if (ret < 0)
937                 return ret;
938
939         mutex_lock(&bq->lock);
940         bq->state = state;
941         mutex_unlock(&bq->lock);
942
943         /* Re-enable ADC only if charger is plugged in. */
944         if (state.online) {
945                 ret = bq25890_field_write(bq, F_CONV_START, 1);
946                 if (ret < 0)
947                         return ret;
948         }
949
950         /* signal userspace, maybe state changed while suspended */
951         power_supply_changed(bq->charger);
952
953         return 0;
954 }
955 #endif
956
957 static const struct dev_pm_ops bq25890_pm = {
958         SET_SYSTEM_SLEEP_PM_OPS(bq25890_suspend, bq25890_resume)
959 };
960
961 static const struct i2c_device_id bq25890_i2c_ids[] = {
962         { "bq25890", 0 },
963         {},
964 };
965 MODULE_DEVICE_TABLE(i2c, bq25890_i2c_ids);
966
967 static const struct of_device_id bq25890_of_match[] = {
968         { .compatible = "ti,bq25890", },
969         { },
970 };
971 MODULE_DEVICE_TABLE(of, bq25890_of_match);
972
973 static const struct acpi_device_id bq25890_acpi_match[] = {
974         {"BQ258900", 0},
975         {},
976 };
977 MODULE_DEVICE_TABLE(acpi, bq25890_acpi_match);
978
979 static struct i2c_driver bq25890_driver = {
980         .driver = {
981                 .name = "bq25890-charger",
982                 .of_match_table = of_match_ptr(bq25890_of_match),
983                 .acpi_match_table = ACPI_PTR(bq25890_acpi_match),
984                 .pm = &bq25890_pm,
985         },
986         .probe = bq25890_probe,
987         .remove = bq25890_remove,
988         .id_table = bq25890_i2c_ids,
989 };
990 module_i2c_driver(bq25890_driver);
991
992 MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
993 MODULE_DESCRIPTION("bq25890 charger driver");
994 MODULE_LICENSE("GPL");