Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / wireless / ti / wl12xx / scan.c
1 /*
2  * This file is part of wl12xx
3  *
4  * Copyright (C) 2012 Texas Instruments. All rights reserved.
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
13  * General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
18  * 02110-1301 USA
19  *
20  */
21
22 #include <linux/ieee80211.h>
23 #include "scan.h"
24 #include "../wlcore/debug.h"
25 #include "../wlcore/tx.h"
26
27 static int wl1271_get_scan_channels(struct wl1271 *wl,
28                                     struct cfg80211_scan_request *req,
29                                     struct basic_scan_channel_params *channels,
30                                     enum ieee80211_band band, bool passive)
31 {
32         struct conf_scan_settings *c = &wl->conf.scan;
33         int i, j;
34         u32 flags;
35
36         for (i = 0, j = 0;
37              i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS;
38              i++) {
39                 flags = req->channels[i]->flags;
40
41                 if (!test_bit(i, wl->scan.scanned_ch) &&
42                     !(flags & IEEE80211_CHAN_DISABLED) &&
43                     (req->channels[i]->band == band) &&
44                     /*
45                      * In passive scans, we scan all remaining
46                      * channels, even if not marked as such.
47                      * In active scans, we only scan channels not
48                      * marked as passive.
49                      */
50                     (passive || !(flags & IEEE80211_CHAN_NO_IR))) {
51                         wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
52                                      req->channels[i]->band,
53                                      req->channels[i]->center_freq);
54                         wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X",
55                                      req->channels[i]->hw_value,
56                                      req->channels[i]->flags);
57                         wl1271_debug(DEBUG_SCAN,
58                                      "max_antenna_gain %d, max_power %d",
59                                      req->channels[i]->max_antenna_gain,
60                                      req->channels[i]->max_power);
61                         wl1271_debug(DEBUG_SCAN, "beacon_found %d",
62                                      req->channels[i]->beacon_found);
63
64                         if (!passive) {
65                                 channels[j].min_duration =
66                                         cpu_to_le32(c->min_dwell_time_active);
67                                 channels[j].max_duration =
68                                         cpu_to_le32(c->max_dwell_time_active);
69                         } else {
70                                 channels[j].min_duration =
71                                         cpu_to_le32(c->dwell_time_passive);
72                                 channels[j].max_duration =
73                                         cpu_to_le32(c->dwell_time_passive);
74                         }
75                         channels[j].early_termination = 0;
76                         channels[j].tx_power_att = req->channels[i]->max_power;
77                         channels[j].channel = req->channels[i]->hw_value;
78
79                         memset(&channels[j].bssid_lsb, 0xff, 4);
80                         memset(&channels[j].bssid_msb, 0xff, 2);
81
82                         /* Mark the channels we already used */
83                         set_bit(i, wl->scan.scanned_ch);
84
85                         j++;
86                 }
87         }
88
89         return j;
90 }
91
92 #define WL1271_NOTHING_TO_SCAN 1
93
94 static int wl1271_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif,
95                             enum ieee80211_band band,
96                             bool passive, u32 basic_rate)
97 {
98         struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
99         struct wl1271_cmd_scan *cmd;
100         struct wl1271_cmd_trigger_scan_to *trigger;
101         int ret;
102         u16 scan_options = 0;
103
104         /* skip active scans if we don't have SSIDs */
105         if (!passive && wl->scan.req->n_ssids == 0)
106                 return WL1271_NOTHING_TO_SCAN;
107
108         cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
109         trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
110         if (!cmd || !trigger) {
111                 ret = -ENOMEM;
112                 goto out;
113         }
114
115         if (wl->conf.scan.split_scan_timeout)
116                 scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN;
117
118         if (passive)
119                 scan_options |= WL1271_SCAN_OPT_PASSIVE;
120
121         cmd->params.role_id = wlvif->role_id;
122
123         if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) {
124                 ret = -EINVAL;
125                 goto out;
126         }
127
128         cmd->params.scan_options = cpu_to_le16(scan_options);
129
130         cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req,
131                                                     cmd->channels,
132                                                     band, passive);
133         if (cmd->params.n_ch == 0) {
134                 ret = WL1271_NOTHING_TO_SCAN;
135                 goto out;
136         }
137
138         cmd->params.tx_rate = cpu_to_le32(basic_rate);
139         cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs;
140         cmd->params.tid_trigger = CONF_TX_AC_ANY_TID;
141         cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
142
143         if (band == IEEE80211_BAND_2GHZ)
144                 cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ;
145         else
146                 cmd->params.band = WL1271_SCAN_BAND_5_GHZ;
147
148         if (wl->scan.ssid_len && wl->scan.ssid) {
149                 cmd->params.ssid_len = wl->scan.ssid_len;
150                 memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len);
151         }
152
153         memcpy(cmd->addr, vif->addr, ETH_ALEN);
154
155         ret = wl12xx_cmd_build_probe_req(wl, wlvif,
156                                          cmd->params.role_id, band,
157                                          wl->scan.ssid, wl->scan.ssid_len,
158                                          wl->scan.req->ie,
159                                          wl->scan.req->ie_len, NULL, 0, false);
160         if (ret < 0) {
161                 wl1271_error("PROBE request template failed");
162                 goto out;
163         }
164
165         trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout);
166         ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
167                               sizeof(*trigger), 0);
168         if (ret < 0) {
169                 wl1271_error("trigger scan to failed for hw scan");
170                 goto out;
171         }
172
173         wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd));
174
175         ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0);
176         if (ret < 0) {
177                 wl1271_error("SCAN failed");
178                 goto out;
179         }
180
181 out:
182         kfree(cmd);
183         kfree(trigger);
184         return ret;
185 }
186
187 int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif)
188 {
189         struct wl1271_cmd_header *cmd = NULL;
190         int ret = 0;
191
192         if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE))
193                 return -EINVAL;
194
195         wl1271_debug(DEBUG_CMD, "cmd scan stop");
196
197         cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
198         if (!cmd) {
199                 ret = -ENOMEM;
200                 goto out;
201         }
202
203         ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd,
204                               sizeof(*cmd), 0);
205         if (ret < 0) {
206                 wl1271_error("cmd stop_scan failed");
207                 goto out;
208         }
209 out:
210         kfree(cmd);
211         return ret;
212 }
213
214 void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif)
215 {
216         int ret = 0;
217         enum ieee80211_band band;
218         u32 rate, mask;
219
220         switch (wl->scan.state) {
221         case WL1271_SCAN_STATE_IDLE:
222                 break;
223
224         case WL1271_SCAN_STATE_2GHZ_ACTIVE:
225                 band = IEEE80211_BAND_2GHZ;
226                 mask = wlvif->bitrate_masks[band];
227                 if (wl->scan.req->no_cck) {
228                         mask &= ~CONF_TX_CCK_RATES;
229                         if (!mask)
230                                 mask = CONF_TX_RATE_MASK_BASIC_P2P;
231                 }
232                 rate = wl1271_tx_min_rate_get(wl, mask);
233                 ret = wl1271_scan_send(wl, wlvif, band, false, rate);
234                 if (ret == WL1271_NOTHING_TO_SCAN) {
235                         wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE;
236                         wl1271_scan_stm(wl, wlvif);
237                 }
238
239                 break;
240
241         case WL1271_SCAN_STATE_2GHZ_PASSIVE:
242                 band = IEEE80211_BAND_2GHZ;
243                 mask = wlvif->bitrate_masks[band];
244                 if (wl->scan.req->no_cck) {
245                         mask &= ~CONF_TX_CCK_RATES;
246                         if (!mask)
247                                 mask = CONF_TX_RATE_MASK_BASIC_P2P;
248                 }
249                 rate = wl1271_tx_min_rate_get(wl, mask);
250                 ret = wl1271_scan_send(wl, wlvif, band, true, rate);
251                 if (ret == WL1271_NOTHING_TO_SCAN) {
252                         if (wl->enable_11a)
253                                 wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE;
254                         else
255                                 wl->scan.state = WL1271_SCAN_STATE_DONE;
256                         wl1271_scan_stm(wl, wlvif);
257                 }
258
259                 break;
260
261         case WL1271_SCAN_STATE_5GHZ_ACTIVE:
262                 band = IEEE80211_BAND_5GHZ;
263                 rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]);
264                 ret = wl1271_scan_send(wl, wlvif, band, false, rate);
265                 if (ret == WL1271_NOTHING_TO_SCAN) {
266                         wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE;
267                         wl1271_scan_stm(wl, wlvif);
268                 }
269
270                 break;
271
272         case WL1271_SCAN_STATE_5GHZ_PASSIVE:
273                 band = IEEE80211_BAND_5GHZ;
274                 rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]);
275                 ret = wl1271_scan_send(wl, wlvif, band, true, rate);
276                 if (ret == WL1271_NOTHING_TO_SCAN) {
277                         wl->scan.state = WL1271_SCAN_STATE_DONE;
278                         wl1271_scan_stm(wl, wlvif);
279                 }
280
281                 break;
282
283         case WL1271_SCAN_STATE_DONE:
284                 wl->scan.failed = false;
285                 cancel_delayed_work(&wl->scan_complete_work);
286                 ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
287                                              msecs_to_jiffies(0));
288                 break;
289
290         default:
291                 wl1271_error("invalid scan state");
292                 break;
293         }
294
295         if (ret < 0) {
296                 cancel_delayed_work(&wl->scan_complete_work);
297                 ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
298                                              msecs_to_jiffies(0));
299         }
300 }
301
302 static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd,
303                                    struct wlcore_scan_channels *cmd_channels)
304 {
305         memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive));
306         memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active));
307         cmd->dfs = cmd_channels->dfs;
308         cmd->n_pactive_ch = cmd_channels->passive_active;
309
310         memcpy(cmd->channels_2, cmd_channels->channels_2,
311                sizeof(cmd->channels_2));
312         memcpy(cmd->channels_5, cmd_channels->channels_5,
313                sizeof(cmd->channels_5));
314         /* channels_4 are not supported, so no need to copy them */
315 }
316
317 int wl1271_scan_sched_scan_config(struct wl1271 *wl,
318                                   struct wl12xx_vif *wlvif,
319                                   struct cfg80211_sched_scan_request *req,
320                                   struct ieee80211_scan_ies *ies)
321 {
322         struct wl1271_cmd_sched_scan_config *cfg = NULL;
323         struct wlcore_scan_channels *cfg_channels = NULL;
324         struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
325         int i, ret;
326         bool force_passive = !req->n_ssids;
327
328         wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
329
330         cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
331         if (!cfg)
332                 return -ENOMEM;
333
334         cfg->role_id = wlvif->role_id;
335         cfg->rssi_threshold = c->rssi_threshold;
336         cfg->snr_threshold  = c->snr_threshold;
337         cfg->n_probe_reqs = c->num_probe_reqs;
338         /* cycles set to 0 it means infinite (until manually stopped) */
339         cfg->cycles = 0;
340         /* report APs when at least 1 is found */
341         cfg->report_after = 1;
342         /* don't stop scanning automatically when something is found */
343         cfg->terminate = 0;
344         cfg->tag = WL1271_SCAN_DEFAULT_TAG;
345         /* don't filter on BSS type */
346         cfg->bss_type = SCAN_BSS_TYPE_ANY;
347         /* currently NL80211 supports only a single interval */
348         for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
349                 cfg->intervals[i] = cpu_to_le32(req->interval);
350
351         cfg->ssid_len = 0;
352         ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req);
353         if (ret < 0)
354                 goto out;
355
356         cfg->filter_type = ret;
357
358         wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type);
359
360         cfg_channels = kzalloc(sizeof(*cfg_channels), GFP_KERNEL);
361         if (!cfg_channels) {
362                 ret = -ENOMEM;
363                 goto out;
364         }
365
366         if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels,
367                                          req->n_channels, req->n_ssids,
368                                          SCAN_TYPE_PERIODIC)) {
369                 wl1271_error("scan channel list is empty");
370                 ret = -EINVAL;
371                 goto out;
372         }
373         wl12xx_adjust_channels(cfg, cfg_channels);
374
375         if (!force_passive && cfg->active[0]) {
376                 u8 band = IEEE80211_BAND_2GHZ;
377                 ret = wl12xx_cmd_build_probe_req(wl, wlvif,
378                                                  wlvif->role_id, band,
379                                                  req->ssids[0].ssid,
380                                                  req->ssids[0].ssid_len,
381                                                  ies->ies[band],
382                                                  ies->len[band],
383                                                  ies->common_ies,
384                                                  ies->common_ie_len,
385                                                  true);
386                 if (ret < 0) {
387                         wl1271_error("2.4GHz PROBE request template failed");
388                         goto out;
389                 }
390         }
391
392         if (!force_passive && cfg->active[1]) {
393                 u8 band = IEEE80211_BAND_5GHZ;
394                 ret = wl12xx_cmd_build_probe_req(wl, wlvif,
395                                                  wlvif->role_id, band,
396                                                  req->ssids[0].ssid,
397                                                  req->ssids[0].ssid_len,
398                                                  ies->ies[band],
399                                                  ies->len[band],
400                                                  ies->common_ies,
401                                                  ies->common_ie_len,
402                                                  true);
403                 if (ret < 0) {
404                         wl1271_error("5GHz PROBE request template failed");
405                         goto out;
406                 }
407         }
408
409         wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg));
410
411         ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg,
412                               sizeof(*cfg), 0);
413         if (ret < 0) {
414                 wl1271_error("SCAN configuration failed");
415                 goto out;
416         }
417 out:
418         kfree(cfg_channels);
419         kfree(cfg);
420         return ret;
421 }
422
423 int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif)
424 {
425         struct wl1271_cmd_sched_scan_start *start;
426         int ret = 0;
427
428         wl1271_debug(DEBUG_CMD, "cmd periodic scan start");
429
430         if (wlvif->bss_type != BSS_TYPE_STA_BSS)
431                 return -EOPNOTSUPP;
432
433         if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) &&
434             test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags))
435                 return -EBUSY;
436
437         start = kzalloc(sizeof(*start), GFP_KERNEL);
438         if (!start)
439                 return -ENOMEM;
440
441         start->role_id = wlvif->role_id;
442         start->tag = WL1271_SCAN_DEFAULT_TAG;
443
444         ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start,
445                               sizeof(*start), 0);
446         if (ret < 0) {
447                 wl1271_error("failed to send scan start command");
448                 goto out_free;
449         }
450
451 out_free:
452         kfree(start);
453         return ret;
454 }
455
456 int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif  *wlvif,
457                             struct cfg80211_sched_scan_request *req,
458                             struct ieee80211_scan_ies *ies)
459 {
460         int ret;
461
462         ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies);
463         if (ret < 0)
464                 return ret;
465
466         return wl1271_scan_sched_scan_start(wl, wlvif);
467 }
468
469 void wl12xx_scan_sched_scan_stop(struct wl1271 *wl,  struct wl12xx_vif *wlvif)
470 {
471         struct wl1271_cmd_sched_scan_stop *stop;
472         int ret = 0;
473
474         wl1271_debug(DEBUG_CMD, "cmd periodic scan stop");
475
476         /* FIXME: what to do if alloc'ing to stop fails? */
477         stop = kzalloc(sizeof(*stop), GFP_KERNEL);
478         if (!stop) {
479                 wl1271_error("failed to alloc memory to send sched scan stop");
480                 return;
481         }
482
483         stop->role_id = wlvif->role_id;
484         stop->tag = WL1271_SCAN_DEFAULT_TAG;
485
486         ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop,
487                               sizeof(*stop), 0);
488         if (ret < 0) {
489                 wl1271_error("failed to send sched scan stop command");
490                 goto out_free;
491         }
492
493 out_free:
494         kfree(stop);
495 }
496
497 int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif,
498                       struct cfg80211_scan_request *req)
499 {
500         wl1271_scan_stm(wl, wlvif);
501         return 0;
502 }
503
504 void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif)
505 {
506         wl1271_scan_stm(wl, wlvif);
507 }