kernel/drivers/net/wireless/iwlwifi/pcie/rx.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
   4  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
   5  *
   6  * Portions of this file are derived from the ipw3945 project, as well
   7  * as portions of the ieee80211 subsystem header files.
   8  *
   9  * This program is free software; you can redistribute it and/or modify it
  10  * under the terms of version 2 of the GNU General Public License as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but WITHOUT
  14  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  15  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  16  * more details.
  17  *
  18  * You should have received a copy of the GNU General Public License along with
  19  * this program; if not, write to the Free Software Foundation, Inc.,
  20  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  21  *
  22  * The full GNU General Public License is included in this distribution in the
  23  * file called LICENSE.
  24  *
  25  * Contact Information:
  26  *  Intel Linux Wireless <ilw@linux.intel.com>
  27  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  28  *
  29  *****************************************************************************/
  30 #include <linux/sched.h>
  31 #include <linux/wait.h>
  32 #include <linux/gfp.h>
  33
  34 #include "iwl-prph.h"
  35 #include "iwl-io.h"
  36 #include "internal.h"
  37 #include "iwl-op-mode.h"
  38
  39 /******************************************************************************
  40  *
  41  * RX path functions
  42  *
  43  ******************************************************************************/
  44
  45 /*
  46  * Rx theory of operation
  47  *
  48  * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
  49  * each of which point to Receive Buffers to be filled by the NIC.  These get
  50  * used not only for Rx frames, but for any command response or notification
  51  * from the NIC.  The driver and NIC manage the Rx buffers by means
  52  * of indexes into the circular buffer.
  53  *
  54  * Rx Queue Indexes
  55  * The host/firmware share two index registers for managing the Rx buffers.
  56  *
  57  * The READ index maps to the first position that the firmware may be writing
  58  * to -- the driver can read up to (but not including) this position and get
  59  * good data.
  60  * The READ index is managed by the firmware once the card is enabled.
  61  *
  62  * The WRITE index maps to the last position the driver has read from -- the
  63  * position preceding WRITE is the last slot the firmware can place a packet.
  64  *
  65  * The queue is empty (no good data) if WRITE = READ - 1, and is full if
  66  * WRITE = READ.
  67  *
  68  * During initialization, the host sets up the READ queue position to the first
  69  * INDEX position, and WRITE to the last (READ - 1 wrapped)
  70  *
  71  * When the firmware places a packet in a buffer, it will advance the READ index
  72  * and fire the RX interrupt.  The driver can then query the READ index and
  73  * process as many packets as possible, moving the WRITE index forward as it
  74  * resets the Rx queue buffers with new memory.
  75  *
  76  * The management in the driver is as follows:
  77  * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
  78  *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
  79  *   to replenish the iwl->rxq->rx_free.
  80  * + In iwl_pcie_rx_replenish (scheduled) if 'processed' != 'read' then the
  81  *   iwl->rxq is replenished and the READ INDEX is updated (updating the
  82  *   'processed' and 'read' driver indexes as well)
  83  * + A received packet is processed and handed to the kernel network stack,
  84  *   detached from the iwl->rxq.  The driver 'processed' index is updated.
  85  * + The Host/Firmware iwl->rxq is replenished at irq thread time from the
  86  *   rx_free list. If there are no allocated buffers in iwl->rxq->rx_free,
  87  *   the READ INDEX is not incremented and iwl->status(RX_STALLED) is set.
  88  *   If there were enough free buffers and RX_STALLED is set it is cleared.
  89  *
  90  *
  91  * Driver sequence:
  92  *
  93  * iwl_rxq_alloc()            Allocates rx_free
  94  * iwl_pcie_rx_replenish()    Replenishes rx_free list from rx_used, and calls
  95  *                            iwl_pcie_rxq_restock
  96  * iwl_pcie_rxq_restock()     Moves available buffers from rx_free into Rx
  97  *                            queue, updates firmware pointers, and updates
  98  *                            the WRITE index.  If insufficient rx_free buffers
  99  *                            are available, schedules iwl_pcie_rx_replenish
 100  *
 101  * -- enable interrupts --
 102  * ISR - iwl_rx()             Detach iwl_rx_mem_buffers from pool up to the
 103  *                            READ INDEX, detaching the SKB from the pool.
 104  *                            Moves the packet buffer from queue to rx_used.
 105  *                            Calls iwl_pcie_rxq_restock to refill any empty
 106  *                            slots.
 107  * ...
 108  *
 109  */
 110
 111 /*
 112  * iwl_rxq_space - Return number of free slots available in queue.
 113  */
 114 static int iwl_rxq_space(const struct iwl_rxq *rxq)
 115 {
 116         /* Make sure RX_QUEUE_SIZE is a power of 2 */
 117         BUILD_BUG_ON(RX_QUEUE_SIZE & (RX_QUEUE_SIZE - 1));
 118
 119         /*
 120          * There can be up to (RX_QUEUE_SIZE - 1) free slots, to avoid ambiguity
 121          * between empty and completely full queues.
 122          * The following is equivalent to modulo by RX_QUEUE_SIZE and is well
 123          * defined for negative dividends.
 124          */
 125         return (rxq->read - rxq->write - 1) & (RX_QUEUE_SIZE - 1);
 126 }
 127
 128 /*
 129  * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
 130  */
 131 static inline __le32 iwl_pcie_dma_addr2rbd_ptr(dma_addr_t dma_addr)
 132 {
 133         return cpu_to_le32((u32)(dma_addr >> 8));
 134 }
 135
 136 /*
 137  * iwl_pcie_rx_stop - stops the Rx DMA
 138  */
 139 int iwl_pcie_rx_stop(struct iwl_trans *trans)
 140 {
 141         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 142         return iwl_poll_direct_bit(trans, FH_MEM_RSSR_RX_STATUS_REG,
 143                                    FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
 144 }
 145
 146 /*
 147  * iwl_pcie_rxq_inc_wr_ptr - Update the write pointer for the RX queue
 148  */
 149 static void iwl_pcie_rxq_inc_wr_ptr(struct iwl_trans *trans)
 150 {
 151         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 152         struct iwl_rxq *rxq = &trans_pcie->rxq;
 153         u32 reg;
 154
 155         lockdep_assert_held(&rxq->lock);
 156
 157         /*
 158          * explicitly wake up the NIC if:
 159          * 1. shadow registers aren't enabled
 160          * 2. there is a chance that the NIC is asleep
 161          */
 162         if (!trans->cfg->base_params->shadow_reg_enable &&
 163             test_bit(STATUS_TPOWER_PMI, &trans->status)) {
 164                 reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
 165
 166                 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
 167                         IWL_DEBUG_INFO(trans, "Rx queue requesting wakeup, GP1 = 0x%x\n",
 168                                        reg);
 169                         iwl_set_bit(trans, CSR_GP_CNTRL,
 170                                     CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 171                         rxq->need_update = true;
 172                         return;
 173                 }
 174         }
 175
 176         rxq->write_actual = round_down(rxq->write, 8);
 177         iwl_write32(trans, FH_RSCSR_CHNL0_WPTR, rxq->write_actual);
 178 }
 179
 180 static void iwl_pcie_rxq_check_wrptr(struct iwl_trans *trans)
 181 {
 182         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 183         struct iwl_rxq *rxq = &trans_pcie->rxq;
 184
 185         spin_lock(&rxq->lock);
 186
 187         if (!rxq->need_update)
 188                 goto exit_unlock;
 189
 190         iwl_pcie_rxq_inc_wr_ptr(trans);
 191         rxq->need_update = false;
 192
 193  exit_unlock:
 194         spin_unlock(&rxq->lock);
 195 }
 196
 197 /*
 198  * iwl_pcie_rxq_restock - refill RX queue from pre-allocated pool
 199  *
 200  * If there are slots in the RX queue that need to be restocked,
 201  * and we have free pre-allocated buffers, fill the ranks as much
 202  * as we can, pulling from rx_free.
 203  *
 204  * This moves the 'write' index forward to catch up with 'processed', and
 205  * also updates the memory address in the firmware to reference the new
 206  * target buffer.
 207  */
 208 static void iwl_pcie_rxq_restock(struct iwl_trans *trans)
 209 {
 210         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 211         struct iwl_rxq *rxq = &trans_pcie->rxq;
 212         struct iwl_rx_mem_buffer *rxb;
 213
 214         /*
 215          * If the device isn't enabled - not need to try to add buffers...
 216          * This can happen when we stop the device and still have an interrupt
 217          * pending. We stop the APM before we sync the interrupts because we
 218          * have to (see comment there). On the other hand, since the APM is
 219          * stopped, we cannot access the HW (in particular not prph).
 220          * So don't try to restock if the APM has been already stopped.
 221          */
 222         if (!test_bit(STATUS_DEVICE_ENABLED, &trans->status))
 223                 return;
 224
 225         spin_lock(&rxq->lock);
 226         while ((iwl_rxq_space(rxq) > 0) && (rxq->free_count)) {
 227                 /* The overwritten rxb must be a used one */
 228                 rxb = rxq->queue[rxq->write];
 229                 BUG_ON(rxb && rxb->page);
 230
 231                 /* Get next free Rx buffer, remove from free list */
 232                 rxb = list_first_entry(&rxq->rx_free, struct iwl_rx_mem_buffer,
 233                                        list);
 234                 list_del(&rxb->list);
 235
 236                 /* Point to Rx buffer via next RBD in circular buffer */
 237                 rxq->bd[rxq->write] = iwl_pcie_dma_addr2rbd_ptr(rxb->page_dma);
 238                 rxq->queue[rxq->write] = rxb;
 239                 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 240                 rxq->free_count--;
 241         }
 242         spin_unlock(&rxq->lock);
 243         /* If the pre-allocated buffer pool is dropping low, schedule to
 244          * refill it */
 245         if (rxq->free_count <= RX_LOW_WATERMARK)
 246                 schedule_work(&trans_pcie->rx_replenish);
 247
 248         /* If we've added more space for the firmware to place data, tell it.
 249          * Increment device's write pointer in multiples of 8. */
 250         if (rxq->write_actual != (rxq->write & ~0x7)) {
 251                 spin_lock(&rxq->lock);
 252                 iwl_pcie_rxq_inc_wr_ptr(trans);
 253                 spin_unlock(&rxq->lock);
 254         }
 255 }
 256
 257 /*
 258  * iwl_pcie_rxq_alloc_rbs - allocate a page for each used RBD
 259  *
 260  * A used RBD is an Rx buffer that has been given to the stack. To use it again
 261  * a page must be allocated and the RBD must point to the page. This function
 262  * doesn't change the HW pointer but handles the list of pages that is used by
 263  * iwl_pcie_rxq_restock. The latter function will update the HW to use the newly
 264  * allocated buffers.
 265  */
 266 static void iwl_pcie_rxq_alloc_rbs(struct iwl_trans *trans, gfp_t priority)
 267 {
 268         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 269         struct iwl_rxq *rxq = &trans_pcie->rxq;
 270         struct iwl_rx_mem_buffer *rxb;
 271         struct page *page;
 272         gfp_t gfp_mask = priority;
 273
 274         while (1) {
 275                 spin_lock(&rxq->lock);
 276                 if (list_empty(&rxq->rx_used)) {
 277                         spin_unlock(&rxq->lock);
 278                         return;
 279                 }
 280                 spin_unlock(&rxq->lock);
 281
 282                 if (rxq->free_count > RX_LOW_WATERMARK)
 283                         gfp_mask |= __GFP_NOWARN;
 284
 285                 if (trans_pcie->rx_page_order > 0)
 286                         gfp_mask |= __GFP_COMP;
 287
 288                 /* Alloc a new receive buffer */
 289                 page = alloc_pages(gfp_mask, trans_pcie->rx_page_order);
 290                 if (!page) {
 291                         if (net_ratelimit())
 292                                 IWL_DEBUG_INFO(trans, "alloc_pages failed, "
 293                                            "order: %d\n",
 294                                            trans_pcie->rx_page_order);
 295
 296                         if ((rxq->free_count <= RX_LOW_WATERMARK) &&
 297                             net_ratelimit())
 298                                 IWL_CRIT(trans, "Failed to alloc_pages with %s."
 299                                          "Only %u free buffers remaining.\n",
 300                                          priority == GFP_ATOMIC ?
 301                                          "GFP_ATOMIC" : "GFP_KERNEL",
 302                                          rxq->free_count);
 303                         /* We don't reschedule replenish work here -- we will
 304                          * call the restock method and if it still needs
 305                          * more buffers it will schedule replenish */
 306                         return;
 307                 }
 308
 309                 spin_lock(&rxq->lock);
 310
 311                 if (list_empty(&rxq->rx_used)) {
 312                         spin_unlock(&rxq->lock);
 313                         __free_pages(page, trans_pcie->rx_page_order);
 314                         return;
 315                 }
 316                 rxb = list_first_entry(&rxq->rx_used, struct iwl_rx_mem_buffer,
 317                                        list);
 318                 list_del(&rxb->list);
 319                 spin_unlock(&rxq->lock);
 320
 321                 BUG_ON(rxb->page);
 322                 rxb->page = page;
 323                 /* Get physical address of the RB */
 324                 rxb->page_dma =
 325                         dma_map_page(trans->dev, page, 0,
 326                                      PAGE_SIZE << trans_pcie->rx_page_order,
 327                                      DMA_FROM_DEVICE);
 328                 if (dma_mapping_error(trans->dev, rxb->page_dma)) {
 329                         rxb->page = NULL;
 330                         spin_lock(&rxq->lock);
 331                         list_add(&rxb->list, &rxq->rx_used);
 332                         spin_unlock(&rxq->lock);
 333                         __free_pages(page, trans_pcie->rx_page_order);
 334                         return;
 335                 }
 336                 /* dma address must be no more than 36 bits */
 337                 BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
 338                 /* and also 256 byte aligned! */
 339                 BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
 340
 341                 spin_lock(&rxq->lock);
 342
 343                 list_add_tail(&rxb->list, &rxq->rx_free);
 344                 rxq->free_count++;
 345
 346                 spin_unlock(&rxq->lock);
 347         }
 348 }
 349
 350 static void iwl_pcie_rxq_free_rbs(struct iwl_trans *trans)
 351 {
 352         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 353         struct iwl_rxq *rxq = &trans_pcie->rxq;
 354         int i;
 355
 356         lockdep_assert_held(&rxq->lock);
 357
 358         for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
 359                 if (!rxq->pool[i].page)
 360                         continue;
 361                 dma_unmap_page(trans->dev, rxq->pool[i].page_dma,
 362                                PAGE_SIZE << trans_pcie->rx_page_order,
 363                                DMA_FROM_DEVICE);
 364                 __free_pages(rxq->pool[i].page, trans_pcie->rx_page_order);
 365                 rxq->pool[i].page = NULL;
 366         }
 367 }
 368
 369 /*
 370  * iwl_pcie_rx_replenish - Move all used buffers from rx_used to rx_free
 371  *
 372  * When moving to rx_free an page is allocated for the slot.
 373  *
 374  * Also restock the Rx queue via iwl_pcie_rxq_restock.
 375  * This is called as a scheduled work item (except for during initialization)
 376  */
 377 static void iwl_pcie_rx_replenish(struct iwl_trans *trans, gfp_t gfp)
 378 {
 379         iwl_pcie_rxq_alloc_rbs(trans, gfp);
 380
 381         iwl_pcie_rxq_restock(trans);
 382 }
 383
 384 static void iwl_pcie_rx_replenish_work(struct work_struct *data)
 385 {
 386         struct iwl_trans_pcie *trans_pcie =
 387             container_of(data, struct iwl_trans_pcie, rx_replenish);
 388
 389         iwl_pcie_rx_replenish(trans_pcie->trans, GFP_KERNEL);
 390 }
 391
 392 static int iwl_pcie_rx_alloc(struct iwl_trans *trans)
 393 {
 394         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 395         struct iwl_rxq *rxq = &trans_pcie->rxq;
 396         struct device *dev = trans->dev;
 397
 398         memset(&trans_pcie->rxq, 0, sizeof(trans_pcie->rxq));
 399
 400         spin_lock_init(&rxq->lock);
 401
 402         if (WARN_ON(rxq->bd || rxq->rb_stts))
 403                 return -EINVAL;
 404
 405         /* Allocate the circular buffer of Read Buffer Descriptors (RBDs) */
 406         rxq->bd = dma_zalloc_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE,
 407                                       &rxq->bd_dma, GFP_KERNEL);
 408         if (!rxq->bd)
 409                 goto err_bd;
 410
 411         /*Allocate the driver's pointer to receive buffer status */
 412         rxq->rb_stts = dma_zalloc_coherent(dev, sizeof(*rxq->rb_stts),
 413                                            &rxq->rb_stts_dma, GFP_KERNEL);
 414         if (!rxq->rb_stts)
 415                 goto err_rb_stts;
 416
 417         return 0;
 418
 419 err_rb_stts:
 420         dma_free_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE,
 421                           rxq->bd, rxq->bd_dma);
 422         rxq->bd_dma = 0;
 423         rxq->bd = NULL;
 424 err_bd:
 425         return -ENOMEM;
 426 }
 427
 428 static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq)
 429 {
 430         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 431         u32 rb_size;
 432         const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
 433
 434         if (trans_pcie->rx_buf_size_8k)
 435                 rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
 436         else
 437                 rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
 438
 439         /* Stop Rx DMA */
 440         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 441         /* reset and flush pointers */
 442         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_RBDCB_WPTR, 0);
 443         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ, 0);
 444         iwl_write_direct32(trans, FH_RSCSR_CHNL0_RDPTR, 0);
 445
 446         /* Reset driver's Rx queue write index */
 447         iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
 448
 449         /* Tell device where to find RBD circular buffer in DRAM */
 450         iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
 451                            (u32)(rxq->bd_dma >> 8));
 452
 453         /* Tell device where in DRAM to update its Rx status */
 454         iwl_write_direct32(trans, FH_RSCSR_CHNL0_STTS_WPTR_REG,
 455                            rxq->rb_stts_dma >> 4);
 456
 457         /* Enable Rx DMA
 458          * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
 459          *      the credit mechanism in 5000 HW RX FIFO
 460          * Direct rx interrupts to hosts
 461          * Rx buffer size 4 or 8k
 462          * RB timeout 0x10
 463          * 256 RBDs
 464          */
 465         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG,
 466                            FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
 467                            FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
 468                            FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
 469                            rb_size|
 470                            (RX_RB_TIMEOUT << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
 471                            (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
 472
 473         /* Set interrupt coalescing timer to default (2048 usecs) */
 474         iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
 475
 476         /* W/A for interrupt coalescing bug in 7260 and 3160 */
 477         if (trans->cfg->host_interrupt_operation_mode)
 478                 iwl_set_bit(trans, CSR_INT_COALESCING, IWL_HOST_INT_OPER_MODE);
 479 }
 480
 481 static void iwl_pcie_rx_init_rxb_lists(struct iwl_rxq *rxq)
 482 {
 483         int i;
 484
 485         lockdep_assert_held(&rxq->lock);
 486
 487         INIT_LIST_HEAD(&rxq->rx_free);
 488         INIT_LIST_HEAD(&rxq->rx_used);
 489         rxq->free_count = 0;
 490
 491         for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
 492                 list_add(&rxq->pool[i].list, &rxq->rx_used);
 493 }
 494
 495 int iwl_pcie_rx_init(struct iwl_trans *trans)
 496 {
 497         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 498         struct iwl_rxq *rxq = &trans_pcie->rxq;
 499         int i, err;
 500
 501         if (!rxq->bd) {
 502                 err = iwl_pcie_rx_alloc(trans);
 503                 if (err)
 504                         return err;
 505         }
 506
 507         spin_lock(&rxq->lock);
 508
 509         INIT_WORK(&trans_pcie->rx_replenish, iwl_pcie_rx_replenish_work);
 510
 511         /* free all first - we might be reconfigured for a different size */
 512         iwl_pcie_rxq_free_rbs(trans);
 513         iwl_pcie_rx_init_rxb_lists(rxq);
 514
 515         for (i = 0; i < RX_QUEUE_SIZE; i++)
 516                 rxq->queue[i] = NULL;
 517
 518         /* Set us so that we have processed and used all buffers, but have
 519          * not restocked the Rx queue with fresh buffers */
 520         rxq->read = rxq->write = 0;
 521         rxq->write_actual = 0;
 522         memset(rxq->rb_stts, 0, sizeof(*rxq->rb_stts));
 523         spin_unlock(&rxq->lock);
 524
 525         iwl_pcie_rx_replenish(trans, GFP_KERNEL);
 526
 527         iwl_pcie_rx_hw_init(trans, rxq);
 528
 529         spin_lock(&rxq->lock);
 530         iwl_pcie_rxq_inc_wr_ptr(trans);
 531         spin_unlock(&rxq->lock);
 532
 533         return 0;
 534 }
 535
 536 void iwl_pcie_rx_free(struct iwl_trans *trans)
 537 {
 538         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 539         struct iwl_rxq *rxq = &trans_pcie->rxq;
 540
 541         /*if rxq->bd is NULL, it means that nothing has been allocated,
 542          * exit now */
 543         if (!rxq->bd) {
 544                 IWL_DEBUG_INFO(trans, "Free NULL rx context\n");
 545                 return;
 546         }
 547
 548         cancel_work_sync(&trans_pcie->rx_replenish);
 549
 550         spin_lock(&rxq->lock);
 551         iwl_pcie_rxq_free_rbs(trans);
 552         spin_unlock(&rxq->lock);
 553
 554         dma_free_coherent(trans->dev, sizeof(__le32) * RX_QUEUE_SIZE,
 555                           rxq->bd, rxq->bd_dma);
 556         rxq->bd_dma = 0;
 557         rxq->bd = NULL;
 558
 559         if (rxq->rb_stts)
 560                 dma_free_coherent(trans->dev,
 561                                   sizeof(struct iwl_rb_status),
 562                                   rxq->rb_stts, rxq->rb_stts_dma);
 563         else
 564                 IWL_DEBUG_INFO(trans, "Free rxq->rb_stts which is NULL\n");
 565         rxq->rb_stts_dma = 0;
 566         rxq->rb_stts = NULL;
 567 }
 568
 569 static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
 570                                 struct iwl_rx_mem_buffer *rxb)
 571 {
 572         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 573         struct iwl_rxq *rxq = &trans_pcie->rxq;
 574         struct iwl_txq *txq = &trans_pcie->txq[trans_pcie->cmd_queue];
 575         bool page_stolen = false;
 576         int max_len = PAGE_SIZE << trans_pcie->rx_page_order;
 577         u32 offset = 0;
 578
 579         if (WARN_ON(!rxb))
 580                 return;
 581
 582         dma_unmap_page(trans->dev, rxb->page_dma, max_len, DMA_FROM_DEVICE);
 583
 584         while (offset + sizeof(u32) + sizeof(struct iwl_cmd_header) < max_len) {
 585                 struct iwl_rx_packet *pkt;
 586                 struct iwl_device_cmd *cmd;
 587                 u16 sequence;
 588                 bool reclaim;
 589                 int index, cmd_index, err, len;
 590                 struct iwl_rx_cmd_buffer rxcb = {
 591                         ._offset = offset,
 592                         ._rx_page_order = trans_pcie->rx_page_order,
 593                         ._page = rxb->page,
 594                         ._page_stolen = false,
 595                         .truesize = max_len,
 596                 };
 597
 598                 pkt = rxb_addr(&rxcb);
 599
 600                 if (pkt->len_n_flags == cpu_to_le32(FH_RSCSR_FRAME_INVALID))
 601                         break;
 602
 603                 IWL_DEBUG_RX(trans,
 604                              "cmd at offset %d: %s (0x%.2x, seq 0x%x)\n",
 605                              rxcb._offset,
 606                              get_cmd_string(trans_pcie, pkt->hdr.cmd),
 607                              pkt->hdr.cmd, le16_to_cpu(pkt->hdr.sequence));
 608
 609                 len = iwl_rx_packet_len(pkt);
 610                 len += sizeof(u32); /* account for status word */
 611                 trace_iwlwifi_dev_rx(trans->dev, trans, pkt, len);
 612                 trace_iwlwifi_dev_rx_data(trans->dev, trans, pkt, len);
 613
 614                 /* Reclaim a command buffer only if this packet is a response
 615                  *   to a (driver-originated) command.
 616                  * If the packet (e.g. Rx frame) originated from uCode,
 617                  *   there is no command buffer to reclaim.
 618                  * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
 619                  *   but apparently a few don't get set; catch them here. */
 620                 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME);
 621                 if (reclaim) {
 622                         int i;
 623
 624                         for (i = 0; i < trans_pcie->n_no_reclaim_cmds; i++) {
 625                                 if (trans_pcie->no_reclaim_cmds[i] ==
 626                                                         pkt->hdr.cmd) {
 627                                         reclaim = false;
 628                                         break;
 629                                 }
 630                         }
 631                 }
 632
 633                 sequence = le16_to_cpu(pkt->hdr.sequence);
 634                 index = SEQ_TO_INDEX(sequence);
 635                 cmd_index = get_cmd_index(&txq->q, index);
 636
 637                 if (reclaim)
 638                         cmd = txq->entries[cmd_index].cmd;
 639                 else
 640                         cmd = NULL;
 641
 642                 err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd);
 643
 644                 if (reclaim) {
 645                         kzfree(txq->entries[cmd_index].free_buf);
 646                         txq->entries[cmd_index].free_buf = NULL;
 647                 }
 648
 649                 /*
 650                  * After here, we should always check rxcb._page_stolen,
 651                  * if it is true then one of the handlers took the page.
 652                  */
 653
 654                 if (reclaim) {
 655                         /* Invoke any callbacks, transfer the buffer to caller,
 656                          * and fire off the (possibly) blocking
 657                          * iwl_trans_send_cmd()
 658                          * as we reclaim the driver command queue */
 659                         if (!rxcb._page_stolen)
 660                                 iwl_pcie_hcmd_complete(trans, &rxcb, err);
 661                         else
 662                                 IWL_WARN(trans, "Claim null rxb?\n");
 663                 }
 664
 665                 page_stolen |= rxcb._page_stolen;
 666                 offset += ALIGN(len, FH_RSCSR_FRAME_ALIGN);
 667         }
 668
 669         /* page was stolen from us -- free our reference */
 670         if (page_stolen) {
 671                 __free_pages(rxb->page, trans_pcie->rx_page_order);
 672                 rxb->page = NULL;
 673         }
 674
 675         /* Reuse the page if possible. For notification packets and
 676          * SKBs that fail to Rx correctly, add them back into the
 677          * rx_free list for reuse later. */
 678         if (rxb->page != NULL) {
 679                 rxb->page_dma =
 680                         dma_map_page(trans->dev, rxb->page, 0,
 681                                      PAGE_SIZE << trans_pcie->rx_page_order,
 682                                      DMA_FROM_DEVICE);
 683                 if (dma_mapping_error(trans->dev, rxb->page_dma)) {
 684                         /*
 685                          * free the page(s) as well to not break
 686                          * the invariant that the items on the used
 687                          * list have no page(s)
 688                          */
 689                         __free_pages(rxb->page, trans_pcie->rx_page_order);
 690                         rxb->page = NULL;
 691                         list_add_tail(&rxb->list, &rxq->rx_used);
 692                 } else {
 693                         list_add_tail(&rxb->list, &rxq->rx_free);
 694                         rxq->free_count++;
 695                 }
 696         } else
 697                 list_add_tail(&rxb->list, &rxq->rx_used);
 698 }
 699
 700 /*
 701  * iwl_pcie_rx_handle - Main entry function for receiving responses from fw
 702  */
 703 static void iwl_pcie_rx_handle(struct iwl_trans *trans)
 704 {
 705         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 706         struct iwl_rxq *rxq = &trans_pcie->rxq;
 707         u32 r, i;
 708         u8 fill_rx = 0;
 709         u32 count = 8;
 710         int total_empty;
 711
 712 restart:
 713         spin_lock(&rxq->lock);
 714         /* uCode's read index (stored in shared DRAM) indicates the last Rx
 715          * buffer that the driver may process (last buffer filled by ucode). */
 716         r = le16_to_cpu(ACCESS_ONCE(rxq->rb_stts->closed_rb_num)) & 0x0FFF;
 717         i = rxq->read;
 718
 719         /* Rx interrupt, but nothing sent from uCode */
 720         if (i == r)
 721                 IWL_DEBUG_RX(trans, "HW = SW = %d\n", r);
 722
 723         /* calculate total frames need to be restock after handling RX */
 724         total_empty = r - rxq->write_actual;
 725         if (total_empty < 0)
 726                 total_empty += RX_QUEUE_SIZE;
 727
 728         if (total_empty > (RX_QUEUE_SIZE / 2))
 729                 fill_rx = 1;
 730
 731         while (i != r) {
 732                 struct iwl_rx_mem_buffer *rxb;
 733
 734                 rxb = rxq->queue[i];
 735                 rxq->queue[i] = NULL;
 736
 737                 IWL_DEBUG_RX(trans, "rxbuf: HW = %d, SW = %d (%p)\n",
 738                              r, i, rxb);
 739                 iwl_pcie_rx_handle_rb(trans, rxb);
 740
 741                 i = (i + 1) & RX_QUEUE_MASK;
 742                 /* If there are a lot of unused frames,
 743                  * restock the Rx queue so ucode wont assert. */
 744                 if (fill_rx) {
 745                         count++;
 746                         if (count >= 8) {
 747                                 rxq->read = i;
 748                                 spin_unlock(&rxq->lock);
 749                                 iwl_pcie_rx_replenish(trans, GFP_ATOMIC);
 750                                 count = 0;
 751                                 goto restart;
 752                         }
 753                 }
 754         }
 755
 756         /* Backtrack one entry */
 757         rxq->read = i;
 758         spin_unlock(&rxq->lock);
 759
 760         if (fill_rx)
 761                 iwl_pcie_rx_replenish(trans, GFP_ATOMIC);
 762         else
 763                 iwl_pcie_rxq_restock(trans);
 764
 765         if (trans_pcie->napi.poll)
 766                 napi_gro_flush(&trans_pcie->napi, false);
 767 }
 768
 769 /*
 770  * iwl_pcie_irq_handle_error - called for HW or SW error interrupt from card
 771  */
 772 static void iwl_pcie_irq_handle_error(struct iwl_trans *trans)
 773 {
 774         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 775
 776         /* W/A for WiFi/WiMAX coex and WiMAX own the RF */
 777         if (trans->cfg->internal_wimax_coex &&
 778             (!(iwl_read_prph(trans, APMG_CLK_CTRL_REG) &
 779                              APMS_CLK_VAL_MRB_FUNC_MODE) ||
 780              (iwl_read_prph(trans, APMG_PS_CTRL_REG) &
 781                             APMG_PS_CTRL_VAL_RESET_REQ))) {
 782                 clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 783                 iwl_op_mode_wimax_active(trans->op_mode);
 784                 wake_up(&trans_pcie->wait_command_queue);
 785                 return;
 786         }
 787
 788         iwl_pcie_dump_csr(trans);
 789         iwl_dump_fh(trans, NULL);
 790
 791         local_bh_disable();
 792         /* The STATUS_FW_ERROR bit is set in this function. This must happen
 793          * before we wake up the command caller, to ensure a proper cleanup. */
 794         iwl_trans_fw_error(trans);
 795         local_bh_enable();
 796
 797         clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 798         wake_up(&trans_pcie->wait_command_queue);
 799 }
 800
 801 static u32 iwl_pcie_int_cause_non_ict(struct iwl_trans *trans)
 802 {
 803         u32 inta;
 804
 805         lockdep_assert_held(&IWL_TRANS_GET_PCIE_TRANS(trans)->irq_lock);
 806
 807         trace_iwlwifi_dev_irq(trans->dev);
 808
 809         /* Discover which interrupts are active/pending */
 810         inta = iwl_read32(trans, CSR_INT);
 811
 812         /* the thread will service interrupts and re-enable them */
 813         return inta;
 814 }
 815
 816 /* a device (PCI-E) page is 4096 bytes long */
 817 #define ICT_SHIFT       12
 818 #define ICT_SIZE        (1 << ICT_SHIFT)
 819 #define ICT_COUNT       (ICT_SIZE / sizeof(u32))
 820
 821 /* interrupt handler using ict table, with this interrupt driver will
 822  * stop using INTA register to get device's interrupt, reading this register
 823  * is expensive, device will write interrupts in ICT dram table, increment
 824  * index then will fire interrupt to driver, driver will OR all ICT table
 825  * entries from current index up to table entry with 0 value. the result is
 826  * the interrupt we need to service, driver will set the entries back to 0 and
 827  * set index.
 828  */
 829 static u32 iwl_pcie_int_cause_ict(struct iwl_trans *trans)
 830 {
 831         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 832         u32 inta;
 833         u32 val = 0;
 834         u32 read;
 835
 836         trace_iwlwifi_dev_irq(trans->dev);
 837
 838         /* Ignore interrupt if there's nothing in NIC to service.
 839          * This may be due to IRQ shared with another device,
 840          * or due to sporadic interrupts thrown from our NIC. */
 841         read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
 842         trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read);
 843         if (!read)
 844                 return 0;
 845
 846         /*
 847          * Collect all entries up to the first 0, starting from ict_index;
 848          * note we already read at ict_index.
 849          */
 850         do {
 851                 val |= read;
 852                 IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n",
 853                                 trans_pcie->ict_index, read);
 854                 trans_pcie->ict_tbl[trans_pcie->ict_index] = 0;
 855                 trans_pcie->ict_index =
 856                         ((trans_pcie->ict_index + 1) & (ICT_COUNT - 1));
 857
 858                 read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
 859                 trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index,
 860                                            read);
 861         } while (read);
 862
 863         /* We should not get this value, just ignore it. */
 864         if (val == 0xffffffff)
 865                 val = 0;
 866
 867         /*
 868          * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit
 869          * (bit 15 before shifting it to 31) to clear when using interrupt
 870          * coalescing. fortunately, bits 18 and 19 stay set when this happens
 871          * so we use them to decide on the real state of the Rx bit.
 872          * In order words, bit 15 is set if bit 18 or bit 19 are set.
 873          */
 874         if (val & 0xC0000)
 875                 val |= 0x8000;
 876
 877         inta = (0xff & val) | ((0xff00 & val) << 16);
 878         return inta;
 879 }
 880
 881 irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 882 {
 883         struct iwl_trans *trans = dev_id;
 884         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 885         struct isr_statistics *isr_stats = &trans_pcie->isr_stats;
 886         u32 inta = 0;
 887         u32 handled = 0;
 888
 889         lock_map_acquire(&trans->sync_cmd_lockdep_map);
 890
 891         spin_lock(&trans_pcie->irq_lock);
 892
 893         /* dram interrupt table not set yet,
 894          * use legacy interrupt.
 895          */
 896         if (likely(trans_pcie->use_ict))
 897                 inta = iwl_pcie_int_cause_ict(trans);
 898         else
 899                 inta = iwl_pcie_int_cause_non_ict(trans);
 900
 901         if (iwl_have_debug_level(IWL_DL_ISR)) {
 902                 IWL_DEBUG_ISR(trans,
 903                               "ISR inta 0x%08x, enabled 0x%08x(sw), enabled(hw) 0x%08x, fh 0x%08x\n",
 904                               inta, trans_pcie->inta_mask,
 905                               iwl_read32(trans, CSR_INT_MASK),
 906                               iwl_read32(trans, CSR_FH_INT_STATUS));
 907                 if (inta & (~trans_pcie->inta_mask))
 908                         IWL_DEBUG_ISR(trans,
 909                                       "We got a masked interrupt (0x%08x)\n",
 910                                       inta & (~trans_pcie->inta_mask));
 911         }
 912
 913         inta &= trans_pcie->inta_mask;
 914
 915         /*
 916          * Ignore interrupt if there's nothing in NIC to service.
 917          * This may be due to IRQ shared with another device,
 918          * or due to sporadic interrupts thrown from our NIC.
 919          */
 920         if (unlikely(!inta)) {
 921                 IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
 922                 /*
 923                  * Re-enable interrupts here since we don't
 924                  * have anything to service
 925                  */
 926                 if (test_bit(STATUS_INT_ENABLED, &trans->status))
 927                         iwl_enable_interrupts(trans);
 928                 spin_unlock(&trans_pcie->irq_lock);
 929                 lock_map_release(&trans->sync_cmd_lockdep_map);
 930                 return IRQ_NONE;
 931         }
 932
 933         if (unlikely(inta == 0xFFFFFFFF || (inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
 934                 /*
 935                  * Hardware disappeared. It might have
 936                  * already raised an interrupt.
 937                  */
 938                 IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
 939                 spin_unlock(&trans_pcie->irq_lock);
 940                 goto out;
 941         }
 942
 943         /* Ack/clear/reset pending uCode interrupts.
 944          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
 945          */
 946         /* There is a hardware bug in the interrupt mask function that some
 947          * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
 948          * they are disabled in the CSR_INT_MASK register. Furthermore the
 949          * ICT interrupt handling mechanism has another bug that might cause
 950          * these unmasked interrupts fail to be detected. We workaround the
 951          * hardware bugs here by ACKing all the possible interrupts so that
 952          * interrupt coalescing can still be achieved.
 953          */
 954         iwl_write32(trans, CSR_INT, inta | ~trans_pcie->inta_mask);
 955
 956         if (iwl_have_debug_level(IWL_DL_ISR))
 957                 IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n",
 958                               inta, iwl_read32(trans, CSR_INT_MASK));
 959
 960         spin_unlock(&trans_pcie->irq_lock);
 961
 962         /* Now service all interrupt bits discovered above. */
 963         if (inta & CSR_INT_BIT_HW_ERR) {
 964                 IWL_ERR(trans, "Hardware error detected.  Restarting.\n");
 965
 966                 /* Tell the device to stop sending interrupts */
 967                 iwl_disable_interrupts(trans);
 968
 969                 isr_stats->hw++;
 970                 iwl_pcie_irq_handle_error(trans);
 971
 972                 handled |= CSR_INT_BIT_HW_ERR;
 973
 974                 goto out;
 975         }
 976
 977         if (iwl_have_debug_level(IWL_DL_ISR)) {
 978                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
 979                 if (inta & CSR_INT_BIT_SCD) {
 980                         IWL_DEBUG_ISR(trans,
 981                                       "Scheduler finished to transmit the frame/frames.\n");
 982                         isr_stats->sch++;
 983                 }
 984
 985                 /* Alive notification via Rx interrupt will do the real work */
 986                 if (inta & CSR_INT_BIT_ALIVE) {
 987                         IWL_DEBUG_ISR(trans, "Alive interrupt\n");
 988                         isr_stats->alive++;
 989                 }
 990         }
 991
 992         /* Safely ignore these bits for debug checks below */
 993         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
 994
 995         /* HW RF KILL switch toggled */
 996         if (inta & CSR_INT_BIT_RF_KILL) {
 997                 bool hw_rfkill;
 998
 999                 hw_rfkill = iwl_is_rfkill_set(trans);
1000                 IWL_WARN(trans, "RF_KILL bit toggled to %s.\n",
1001                          hw_rfkill ? "disable radio" : "enable radio");
1002
1003                 isr_stats->rfkill++;
1004
1005                 iwl_trans_pcie_rf_kill(trans, hw_rfkill);
1006                 if (hw_rfkill) {
1007                         set_bit(STATUS_RFKILL, &trans->status);
1008                         if (test_and_clear_bit(STATUS_SYNC_HCMD_ACTIVE,
1009                                                &trans->status))
1010                                 IWL_DEBUG_RF_KILL(trans,
1011                                                   "Rfkill while SYNC HCMD in flight\n");
1012                         wake_up(&trans_pcie->wait_command_queue);
1013                 } else {
1014                         clear_bit(STATUS_RFKILL, &trans->status);
1015                 }
1016
1017                 handled |= CSR_INT_BIT_RF_KILL;
1018         }
1019
1020         /* Chip got too hot and stopped itself */
1021         if (inta & CSR_INT_BIT_CT_KILL) {
1022                 IWL_ERR(trans, "Microcode CT kill error detected.\n");
1023                 isr_stats->ctkill++;
1024                 handled |= CSR_INT_BIT_CT_KILL;
1025         }
1026
1027         /* Error detected by uCode */
1028         if (inta & CSR_INT_BIT_SW_ERR) {
1029                 IWL_ERR(trans, "Microcode SW error detected. "
1030                         " Restarting 0x%X.\n", inta);
1031                 isr_stats->sw++;
1032                 iwl_pcie_irq_handle_error(trans);
1033                 handled |= CSR_INT_BIT_SW_ERR;
1034         }
1035
1036         /* uCode wakes up after power-down sleep */
1037         if (inta & CSR_INT_BIT_WAKEUP) {
1038                 IWL_DEBUG_ISR(trans, "Wakeup interrupt\n");
1039                 iwl_pcie_rxq_check_wrptr(trans);
1040                 iwl_pcie_txq_check_wrptrs(trans);
1041
1042                 isr_stats->wakeup++;
1043
1044                 handled |= CSR_INT_BIT_WAKEUP;
1045         }
1046
1047         /* All uCode command responses, including Tx command responses,
1048          * Rx "responses" (frame-received notification), and other
1049          * notifications from uCode come through here*/
1050         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
1051                     CSR_INT_BIT_RX_PERIODIC)) {
1052                 IWL_DEBUG_ISR(trans, "Rx interrupt\n");
1053                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1054                         handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1055                         iwl_write32(trans, CSR_FH_INT_STATUS,
1056                                         CSR_FH_INT_RX_MASK);
1057                 }
1058                 if (inta & CSR_INT_BIT_RX_PERIODIC) {
1059                         handled |= CSR_INT_BIT_RX_PERIODIC;
1060                         iwl_write32(trans,
1061                                 CSR_INT, CSR_INT_BIT_RX_PERIODIC);
1062                 }
1063                 /* Sending RX interrupt require many steps to be done in the
1064                  * the device:
1065                  * 1- write interrupt to current index in ICT table.
1066                  * 2- dma RX frame.
1067                  * 3- update RX shared data to indicate last write index.
1068                  * 4- send interrupt.
1069                  * This could lead to RX race, driver could receive RX interrupt
1070                  * but the shared data changes does not reflect this;
1071                  * periodic interrupt will detect any dangling Rx activity.
1072                  */
1073
1074                 /* Disable periodic interrupt; we use it as just a one-shot. */
1075                 iwl_write8(trans, CSR_INT_PERIODIC_REG,
1076                             CSR_INT_PERIODIC_DIS);
1077
1078                 /*
1079                  * Enable periodic interrupt in 8 msec only if we received
1080                  * real RX interrupt (instead of just periodic int), to catch
1081                  * any dangling Rx interrupt.  If it was just the periodic
1082                  * interrupt, there was no dangling Rx activity, and no need
1083                  * to extend the periodic interrupt; one-shot is enough.
1084                  */
1085                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
1086                         iwl_write8(trans, CSR_INT_PERIODIC_REG,
1087                                    CSR_INT_PERIODIC_ENA);
1088
1089                 isr_stats->rx++;
1090
1091                 local_bh_disable();
1092                 iwl_pcie_rx_handle(trans);
1093                 local_bh_enable();
1094         }
1095
1096         /* This "Tx" DMA channel is used only for loading uCode */
1097         if (inta & CSR_INT_BIT_FH_TX) {
1098                 iwl_write32(trans, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
1099                 IWL_DEBUG_ISR(trans, "uCode load interrupt\n");
1100                 isr_stats->tx++;
1101                 handled |= CSR_INT_BIT_FH_TX;
1102                 /* Wake up uCode load routine, now that load is complete */
1103                 trans_pcie->ucode_write_complete = true;
1104                 wake_up(&trans_pcie->ucode_write_waitq);
1105         }
1106
1107         if (inta & ~handled) {
1108                 IWL_ERR(trans, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1109                 isr_stats->unhandled++;
1110         }
1111
1112         if (inta & ~(trans_pcie->inta_mask)) {
1113                 IWL_WARN(trans, "Disabled INTA bits 0x%08x were pending\n",
1114                          inta & ~trans_pcie->inta_mask);
1115         }
1116
1117         /* Re-enable all interrupts */
1118         /* only Re-enable if disabled by irq */
1119         if (test_bit(STATUS_INT_ENABLED, &trans->status))
1120                 iwl_enable_interrupts(trans);
1121         /* Re-enable RF_KILL if it occurred */
1122         else if (handled & CSR_INT_BIT_RF_KILL)
1123                 iwl_enable_rfkill_int(trans);
1124
1125 out:
1126         lock_map_release(&trans->sync_cmd_lockdep_map);
1127         return IRQ_HANDLED;
1128 }
1129
1130 /******************************************************************************
1131  *
1132  * ICT functions
1133  *
1134  ******************************************************************************/
1135
1136 /* Free dram table */
1137 void iwl_pcie_free_ict(struct iwl_trans *trans)
1138 {
1139         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
1140
1141         if (trans_pcie->ict_tbl) {
1142                 dma_free_coherent(trans->dev, ICT_SIZE,
1143                                   trans_pcie->ict_tbl,
1144                                   trans_pcie->ict_tbl_dma);
1145                 trans_pcie->ict_tbl = NULL;
1146                 trans_pcie->ict_tbl_dma = 0;
1147         }
1148 }
1149
1150 /*
1151  * allocate dram shared table, it is an aligned memory
1152  * block of ICT_SIZE.
1153  * also reset all data related to ICT table interrupt.
1154  */
1155 int iwl_pcie_alloc_ict(struct iwl_trans *trans)
1156 {
1157         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
1158
1159         trans_pcie->ict_tbl =
1160                 dma_zalloc_coherent(trans->dev, ICT_SIZE,
1161                                    &trans_pcie->ict_tbl_dma,
1162                                    GFP_KERNEL);
1163         if (!trans_pcie->ict_tbl)
1164                 return -ENOMEM;
1165
1166         /* just an API sanity check ... it is guaranteed to be aligned */
1167         if (WARN_ON(trans_pcie->ict_tbl_dma & (ICT_SIZE - 1))) {
1168                 iwl_pcie_free_ict(trans);
1169                 return -EINVAL;
1170         }
1171
1172         IWL_DEBUG_ISR(trans, "ict dma addr %Lx ict vir addr %p\n",
1173                       (unsigned long long)trans_pcie->ict_tbl_dma,
1174                       trans_pcie->ict_tbl);
1175
1176         return 0;
1177 }
1178
1179 /* Device is going up inform it about using ICT interrupt table,
1180  * also we need to tell the driver to start using ICT interrupt.
1181  */
1182 void iwl_pcie_reset_ict(struct iwl_trans *trans)
1183 {
1184         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
1185         u32 val;
1186
1187         if (!trans_pcie->ict_tbl)
1188                 return;
1189
1190         spin_lock(&trans_pcie->irq_lock);
1191         iwl_disable_interrupts(trans);
1192
1193         memset(trans_pcie->ict_tbl, 0, ICT_SIZE);
1194
1195         val = trans_pcie->ict_tbl_dma >> ICT_SHIFT;
1196
1197         val |= CSR_DRAM_INT_TBL_ENABLE;
1198         val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
1199
1200         IWL_DEBUG_ISR(trans, "CSR_DRAM_INT_TBL_REG =0x%x\n", val);
1201
1202         iwl_write32(trans, CSR_DRAM_INT_TBL_REG, val);
1203         trans_pcie->use_ict = true;
1204         trans_pcie->ict_index = 0;
1205         iwl_write32(trans, CSR_INT, trans_pcie->inta_mask);
1206         iwl_enable_interrupts(trans);
1207         spin_unlock(&trans_pcie->irq_lock);
1208 }
1209
1210 /* Device is going down disable ict interrupt usage */
1211 void iwl_pcie_disable_ict(struct iwl_trans *trans)
1212 {
1213         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
1214
1215         spin_lock(&trans_pcie->irq_lock);
1216         trans_pcie->use_ict = false;
1217         spin_unlock(&trans_pcie->irq_lock);
1218 }
1219
1220 irqreturn_t iwl_pcie_isr(int irq, void *data)
1221 {
1222         struct iwl_trans *trans = data;
1223
1224         if (!trans)
1225                 return IRQ_NONE;
1226
1227         /* Disable (but don't clear!) interrupts here to avoid
1228          * back-to-back ISRs and sporadic interrupts from our NIC.
1229          * If we have something to service, the tasklet will re-enable ints.
1230          * If we *don't* have something, we'll re-enable before leaving here.
1231          */
1232         iwl_write32(trans, CSR_INT_MASK, 0x00000000);
1233
1234         return IRQ_WAKE_THREAD;
1235 }