Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / wireless / brcm80211 / brcmsmac / dma.h
1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 #ifndef _BRCM_DMA_H_
18 #define _BRCM_DMA_H_
19
20 #include <linux/delay.h>
21 #include <linux/skbuff.h>
22 #include "types.h"              /* forward structure declarations */
23
24 /* map/unmap direction */
25 #define DMA_TX  1               /* TX direction for DMA */
26 #define DMA_RX  2               /* RX direction for DMA */
27
28 /* DMA structure:
29  *  support two DMA engines: 32 bits address or 64 bit addressing
30  *  basic DMA register set is per channel(transmit or receive)
31  *  a pair of channels is defined for convenience
32  */
33
34 /* 32 bits addressing */
35
36 struct dma32diag {      /* diag access */
37         u32 fifoaddr;   /* diag address */
38         u32 fifodatalow;        /* low 32bits of data */
39         u32 fifodatahigh;       /* high 32bits of data */
40         u32 pad;                /* reserved */
41 };
42
43 /* 64 bits addressing */
44
45 /* dma registers per channel(xmt or rcv) */
46 struct dma64regs {
47         u32 control;    /* enable, et al */
48         u32 ptr;        /* last descriptor posted to chip */
49         u32 addrlow;    /* desc ring base address low 32-bits (8K aligned) */
50         u32 addrhigh;   /* desc ring base address bits 63:32 (8K aligned) */
51         u32 status0;    /* current descriptor, xmt state */
52         u32 status1;    /* active descriptor, xmt error */
53 };
54
55 /* range param for dma_getnexttxp() and dma_txreclaim */
56 enum txd_range {
57         DMA_RANGE_ALL = 1,
58         DMA_RANGE_TRANSMITTED,
59         DMA_RANGE_TRANSFERED
60 };
61
62 /*
63  * Exported data structure (read-only)
64  */
65 /* export structure */
66 struct dma_pub {
67         uint txavail;           /* # free tx descriptors */
68         uint dmactrlflags;      /* dma control flags */
69
70         /* rx error counters */
71         uint rxgiants;          /* rx giant frames */
72         uint rxnobuf;           /* rx out of dma descriptors */
73         /* tx error counters */
74         uint txnobuf;           /* tx out of dma descriptors */
75 };
76
77 extern struct dma_pub *dma_attach(char *name, struct brcms_c_info *wlc,
78                                   uint txregbase, uint rxregbase,
79                                   uint ntxd, uint nrxd,
80                                   uint rxbufsize, int rxextheadroom,
81                                   uint nrxpost, uint rxoffset);
82
83 void dma_rxinit(struct dma_pub *pub);
84 int dma_rx(struct dma_pub *pub, struct sk_buff_head *skb_list);
85 bool dma_rxfill(struct dma_pub *pub);
86 bool dma_rxreset(struct dma_pub *pub);
87 bool dma_txreset(struct dma_pub *pub);
88 void dma_txinit(struct dma_pub *pub);
89 int dma_txfast(struct brcms_c_info *wlc, struct dma_pub *pub,
90                struct sk_buff *p0);
91 void dma_txflush(struct dma_pub *pub);
92 int dma_txpending(struct dma_pub *pub);
93 void dma_kick_tx(struct dma_pub *pub);
94 void dma_txsuspend(struct dma_pub *pub);
95 bool dma_txsuspended(struct dma_pub *pub);
96 void dma_txresume(struct dma_pub *pub);
97 void dma_txreclaim(struct dma_pub *pub, enum txd_range range);
98 void dma_rxreclaim(struct dma_pub *pub);
99 void dma_detach(struct dma_pub *pub);
100 unsigned long dma_getvar(struct dma_pub *pub, const char *name);
101 struct sk_buff *dma_getnexttxp(struct dma_pub *pub, enum txd_range range);
102 void dma_counterreset(struct dma_pub *pub);
103
104 void dma_walk_packets(struct dma_pub *dmah, void (*callback_fnc)
105                       (void *pkt, void *arg_a), void *arg_a);
106
107 /*
108  * DMA(Bug) on bcm47xx chips seems to declare that the packet is ready, but
109  * the packet length is not updated yet (by DMA) on the expected time.
110  * Workaround is to hold processor till DMA updates the length, and stay off
111  * the bus to allow DMA update the length in buffer
112  */
113 static inline void dma_spin_for_len(uint len, struct sk_buff *head)
114 {
115 #if defined(CONFIG_BCM47XX)
116         if (!len) {
117                 while (!(len = *(u16 *) KSEG1ADDR(head->data)))
118                         udelay(1);
119
120                 *(u16 *) (head->data) = cpu_to_le16((u16) len);
121         }
122 #endif                          /* defined(CONFIG_BCM47XX) */
123 }
124
125 #endif                          /* _BRCM_DMA_H_ */