kernel/drivers/net/hamradio/scc.c

   1 #define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $"
   2
   3 #define VERSION "3.0"
   4
   5 /*
   6  * Please use z8530drv-utils-3.0 with this version.
   7  *            ------------------
   8  *
   9  * You can find a subset of the documentation in
  10  * Documentation/networking/z8530drv.txt.
  11  */
  12
  13 /*
  14    ********************************************************************
  15    *   SCC.C - Linux driver for Z8530 based HDLC cards for AX.25      *
  16    ********************************************************************
  17
  18
  19    ********************************************************************
  20
  21         Copyright (c) 1993, 2000 Joerg Reuter DL1BKE
  22
  23         portions (c) 1993 Guido ten Dolle PE1NNZ
  24
  25    ********************************************************************
  26
  27    The driver and the programs in the archive are UNDER CONSTRUCTION.
  28    The code is likely to fail, and so your kernel could --- even
  29    a whole network.
  30
  31    This driver is intended for Amateur Radio use. If you are running it
  32    for commercial purposes, please drop me a note. I am nosy...
  33
  34    ...BUT:
  35
  36    ! You  m u s t  recognize the appropriate legislations of your country !
  37    ! before you connect a radio to the SCC board and start to transmit or !
  38    ! receive. The GPL allows you to use the  d r i v e r,  NOT the RADIO! !
  39
  40    For non-Amateur-Radio use please note that you might need a special
  41    allowance/licence from the designer of the SCC Board and/or the
  42    MODEM.
  43
  44    This program is free software; you can redistribute it and/or modify
  45    it under the terms of the (modified) GNU General Public License
  46    delivered with the Linux kernel source.
  47
  48    This program is distributed in the hope that it will be useful,
  49    but WITHOUT ANY WARRANTY; without even the implied warranty of
  50    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  51    GNU General Public License for more details.
  52
  53    You should find a copy of the GNU General Public License in
  54    /usr/src/linux/COPYING;
  55
  56    ********************************************************************
  57
  58
  59    Incomplete history of z8530drv:
  60    -------------------------------
  61
  62    1994-09-13   started to write the driver, rescued most of my own
  63                 code (and Hans Alblas' memory buffer pool concept) from
  64                 an earlier project "sccdrv" which was initiated by
  65                 Guido ten Dolle. Not much of the old driver survived,
  66                 though. The first version I put my hands on was sccdrv1.3
  67                 from August 1993. The memory buffer pool concept
  68                 appeared in an unauthorized sccdrv version (1.5) from
  69                 August 1994.
  70
  71    1995-01-31   changed copyright notice to GPL without limitations.
  72
  73      .
  74      .  <SNIP>
  75      .
  76
  77    1996-10-05   New semester, new driver...
  78
  79                   * KISS TNC emulator removed (TTY driver)
  80                   * Source moved to drivers/net/
  81                   * Includes Z8530 defines from drivers/net/z8530.h
  82                   * Uses sk_buffer memory management
  83                   * Reduced overhead of /proc/net/z8530drv output
  84                   * Streamlined quite a lot things
  85                   * Invents brand new bugs... ;-)
  86
  87                   The move to version number 3.0 reflects theses changes.
  88                   You can use 'kissbridge' if you need a KISS TNC emulator.
  89
  90    1996-12-13   Fixed for Linux networking changes. (G4KLX)
  91    1997-01-08   Fixed the remaining problems.
  92    1997-04-02   Hopefully fixed the problems with the new *_timer()
  93                 routines, added calibration code.
  94    1997-10-12   Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO
  95    1998-01-29   Small fix to avoid lock-up on initialization
  96    1998-09-29   Fixed the "grouping" bugs, tx_inhibit works again,
  97                 using dev->tx_queue_len now instead of MAXQUEUE now.
  98    1998-10-21   Postponed the spinlock changes, would need a lot of
  99                 testing I currently don't have the time to. Softdcd doesn't
 100                 work.
 101    1998-11-04   Softdcd does not work correctly in DPLL mode, in fact it
 102                 never did. The DPLL locks on noise, the SYNC unit sees
 103                 flags that aren't... Restarting the DPLL does not help
 104                 either, it resynchronizes too slow and the first received
 105                 frame gets lost.
 106    2000-02-13   Fixed for new network driver interface changes, still
 107                 does TX timeouts itself since it uses its own queue
 108                 scheme.
 109
 110    Thanks to all who contributed to this driver with ideas and bug
 111    reports!
 112
 113    NB -- if you find errors, change something, please let me know
 114          first before you distribute it... And please don't touch
 115          the version number. Just replace my callsign in
 116          "v3.0.dl1bke" with your own. Just to avoid confusion...
 117
 118    If you want to add your modification to the linux distribution
 119    please (!) contact me first.
 120
 121    New versions of the driver will be announced on the linux-hams
 122    mailing list on vger.kernel.org. To subscribe send an e-mail
 123    to majordomo@vger.kernel.org with the following line in
 124    the body of the mail:
 125
 126            subscribe linux-hams
 127
 128    The content of the "Subject" field will be ignored.
 129
 130    vy 73,
 131    Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org
 132                 AX-25   : DL1BKE @ DB0ABH.#BAY.DEU.EU
 133                 Internet: jreuter@yaina.de
 134                 www     : http://yaina.de/jreuter
 135 */
 136
 137 /* ----------------------------------------------------------------------- */
 138
 139 #undef  SCC_LDELAY              /* slow it even a bit more down */
 140 #undef  SCC_DONT_CHECK          /* don't look if the SCCs you specified are available */
 141
 142 #define SCC_MAXCHIPS    4       /* number of max. supported chips */
 143 #define SCC_BUFSIZE     384     /* must not exceed 4096 */
 144 #undef  SCC_DEBUG
 145
 146 #define SCC_DEFAULT_CLOCK       4915200
 147                                 /* default pclock if nothing is specified */
 148
 149 /* ----------------------------------------------------------------------- */
 150
 151 #include <linux/module.h>
 152 #include <linux/errno.h>
 153 #include <linux/signal.h>
 154 #include <linux/timer.h>
 155 #include <linux/interrupt.h>
 156 #include <linux/ioport.h>
 157 #include <linux/string.h>
 158 #include <linux/in.h>
 159 #include <linux/fcntl.h>
 160 #include <linux/ptrace.h>
 161 #include <linux/delay.h>
 162 #include <linux/skbuff.h>
 163 #include <linux/netdevice.h>
 164 #include <linux/rtnetlink.h>
 165 #include <linux/if_ether.h>
 166 #include <linux/if_arp.h>
 167 #include <linux/socket.h>
 168 #include <linux/init.h>
 169 #include <linux/scc.h>
 170 #include <linux/ctype.h>
 171 #include <linux/kernel.h>
 172 #include <linux/proc_fs.h>
 173 #include <linux/seq_file.h>
 174 #include <linux/bitops.h>
 175
 176 #include <net/net_namespace.h>
 177 #include <net/ax25.h>
 178
 179 #include <asm/irq.h>
 180 #include <asm/io.h>
 181 #include <asm/uaccess.h>
 182
 183 #include "z8530.h"
 184
 185 static const char banner[] __initconst = KERN_INFO \
 186         "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n";
 187
 188 static void t_dwait(unsigned long);
 189 static void t_txdelay(unsigned long);
 190 static void t_tail(unsigned long);
 191 static void t_busy(unsigned long);
 192 static void t_maxkeyup(unsigned long);
 193 static void t_idle(unsigned long);
 194 static void scc_tx_done(struct scc_channel *);
 195 static void scc_start_tx_timer(struct scc_channel *, void (*)(unsigned long), unsigned long);
 196 static void scc_start_maxkeyup(struct scc_channel *);
 197 static void scc_start_defer(struct scc_channel *);
 198
 199 static void z8530_init(void);
 200
 201 static void init_channel(struct scc_channel *scc);
 202 static void scc_key_trx (struct scc_channel *scc, char tx);
 203 static void scc_init_timer(struct scc_channel *scc);
 204
 205 static int scc_net_alloc(const char *name, struct scc_channel *scc);
 206 static void scc_net_setup(struct net_device *dev);
 207 static int scc_net_open(struct net_device *dev);
 208 static int scc_net_close(struct net_device *dev);
 209 static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb);
 210 static netdev_tx_t scc_net_tx(struct sk_buff *skb,
 211                               struct net_device *dev);
 212 static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 213 static int scc_net_set_mac_address(struct net_device *dev, void *addr);
 214 static struct net_device_stats * scc_net_get_stats(struct net_device *dev);
 215
 216 static unsigned char SCC_DriverName[] = "scc";
 217
 218 static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS];
 219
 220 static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS];   /* information per channel */
 221
 222 static struct scc_ctrl {
 223         io_port chan_A;
 224         io_port chan_B;
 225         int irq;
 226 } SCC_ctrl[SCC_MAXCHIPS+1];
 227
 228 static unsigned char Driver_Initialized;
 229 static int Nchips;
 230 static io_port Vector_Latch;
 231
 232
 233 /* ******************************************************************** */
 234 /* *                    Port Access Functions                         * */
 235 /* ******************************************************************** */
 236
 237 /* These provide interrupt save 2-step access to the Z8530 registers */
 238
 239 static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */
 240
 241 static inline unsigned char InReg(io_port port, unsigned char reg)
 242 {
 243         unsigned long flags;
 244         unsigned char r;
 245
 246         spin_lock_irqsave(&iolock, flags);
 247 #ifdef SCC_LDELAY
 248         Outb(port, reg);
 249         udelay(SCC_LDELAY);
 250         r=Inb(port);
 251         udelay(SCC_LDELAY);
 252 #else
 253         Outb(port, reg);
 254         r=Inb(port);
 255 #endif
 256         spin_unlock_irqrestore(&iolock, flags);
 257         return r;
 258 }
 259
 260 static inline void OutReg(io_port port, unsigned char reg, unsigned char val)
 261 {
 262         unsigned long flags;
 263
 264         spin_lock_irqsave(&iolock, flags);
 265 #ifdef SCC_LDELAY
 266         Outb(port, reg); udelay(SCC_LDELAY);
 267         Outb(port, val); udelay(SCC_LDELAY);
 268 #else
 269         Outb(port, reg);
 270         Outb(port, val);
 271 #endif
 272         spin_unlock_irqrestore(&iolock, flags);
 273 }
 274
 275 static inline void wr(struct scc_channel *scc, unsigned char reg,
 276         unsigned char val)
 277 {
 278         OutReg(scc->ctrl, reg, (scc->wreg[reg] = val));
 279 }
 280
 281 static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val)
 282 {
 283         OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val));
 284 }
 285
 286 static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val)
 287 {
 288         OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val));
 289 }
 290
 291 /* ******************************************************************** */
 292 /* *                    Some useful macros                            * */
 293 /* ******************************************************************** */
 294
 295 static inline void scc_discard_buffers(struct scc_channel *scc)
 296 {
 297         unsigned long flags;
 298
 299         spin_lock_irqsave(&scc->lock, flags);
 300         if (scc->tx_buff != NULL)
 301         {
 302                 dev_kfree_skb(scc->tx_buff);
 303                 scc->tx_buff = NULL;
 304         }
 305
 306         while (!skb_queue_empty(&scc->tx_queue))
 307                 dev_kfree_skb(skb_dequeue(&scc->tx_queue));
 308
 309         spin_unlock_irqrestore(&scc->lock, flags);
 310 }
 311
 312
 313
 314 /* ******************************************************************** */
 315 /* *                    Interrupt Service Routines                    * */
 316 /* ******************************************************************** */
 317
 318
 319 /* ----> subroutines for the interrupt handlers <---- */
 320
 321 static inline void scc_notify(struct scc_channel *scc, int event)
 322 {
 323         struct sk_buff *skb;
 324         char *bp;
 325
 326         if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA)
 327                 return;
 328
 329         skb = dev_alloc_skb(2);
 330         if (skb != NULL)
 331         {
 332                 bp = skb_put(skb, 2);
 333                 *bp++ = PARAM_HWEVENT;
 334                 *bp++ = event;
 335                 scc_net_rx(scc, skb);
 336         } else
 337                 scc->stat.nospace++;
 338 }
 339
 340 static inline void flush_rx_FIFO(struct scc_channel *scc)
 341 {
 342         int k;
 343
 344         for (k=0; k<3; k++)
 345                 Inb(scc->data);
 346
 347         if(scc->rx_buff != NULL)                /* did we receive something? */
 348         {
 349                 scc->stat.rxerrs++;  /* then count it as an error */
 350                 dev_kfree_skb_irq(scc->rx_buff);
 351                 scc->rx_buff = NULL;
 352         }
 353 }
 354
 355 static void start_hunt(struct scc_channel *scc)
 356 {
 357         if ((scc->modem.clocksrc != CLK_EXTERNAL))
 358                 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
 359         or(scc,R3,ENT_HM|RxENABLE);  /* enable the receiver, hunt mode */
 360 }
 361
 362 /* ----> four different interrupt handlers for Tx, Rx, changing of      */
 363 /*       DCD/CTS and Rx/Tx errors                                       */
 364
 365 /* Transmitter interrupt handler */
 366 static inline void scc_txint(struct scc_channel *scc)
 367 {
 368         struct sk_buff *skb;
 369
 370         scc->stat.txints++;
 371         skb = scc->tx_buff;
 372
 373         /* send first octet */
 374
 375         if (skb == NULL)
 376         {
 377                 skb = skb_dequeue(&scc->tx_queue);
 378                 scc->tx_buff = skb;
 379                 netif_wake_queue(scc->dev);
 380
 381                 if (skb == NULL)
 382                 {
 383                         scc_tx_done(scc);
 384                         Outb(scc->ctrl, RES_Tx_P);
 385                         return;
 386                 }
 387
 388                 if (skb->len == 0)              /* Paranoia... */
 389                 {
 390                         dev_kfree_skb_irq(skb);
 391                         scc->tx_buff = NULL;
 392                         scc_tx_done(scc);
 393                         Outb(scc->ctrl, RES_Tx_P);
 394                         return;
 395                 }
 396
 397                 scc->stat.tx_state = TXS_ACTIVE;
 398
 399                 OutReg(scc->ctrl, R0, RES_Tx_CRC);
 400                                                 /* reset CRC generator */
 401                 or(scc,R10,ABUNDER);            /* re-install underrun protection */
 402                 Outb(scc->data,*skb->data);     /* send byte */
 403                 skb_pull(skb, 1);
 404
 405                 if (!scc->enhanced)             /* reset EOM latch */
 406                         Outb(scc->ctrl,RES_EOM_L);
 407                 return;
 408         }
 409
 410         /* End Of Frame... */
 411
 412         if (skb->len == 0)
 413         {
 414                 Outb(scc->ctrl, RES_Tx_P);      /* reset pending int */
 415                 cl(scc, R10, ABUNDER);          /* send CRC */
 416                 dev_kfree_skb_irq(skb);
 417                 scc->tx_buff = NULL;
 418                 scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */
 419                 return;
 420         }
 421
 422         /* send octet */
 423
 424         Outb(scc->data,*skb->data);
 425         skb_pull(skb, 1);
 426 }
 427
 428
 429 /* External/Status interrupt handler */
 430 static inline void scc_exint(struct scc_channel *scc)
 431 {
 432         unsigned char status,changes,chg_and_stat;
 433
 434         scc->stat.exints++;
 435
 436         status = InReg(scc->ctrl,R0);
 437         changes = status ^ scc->status;
 438         chg_and_stat = changes & status;
 439
 440         /* ABORT: generated whenever DCD drops while receiving */
 441
 442         if (chg_and_stat & BRK_ABRT)            /* Received an ABORT */
 443                 flush_rx_FIFO(scc);
 444
 445         /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */
 446
 447         if ((changes & SYNC_HUNT) && scc->kiss.softdcd)
 448         {
 449                 if (status & SYNC_HUNT)
 450                 {
 451                         scc->dcd = 0;
 452                         flush_rx_FIFO(scc);
 453                         if ((scc->modem.clocksrc != CLK_EXTERNAL))
 454                                 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
 455                 } else {
 456                         scc->dcd = 1;
 457                 }
 458
 459                 scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON);
 460         }
 461
 462         /* DCD: on = start to receive packet, off = ABORT condition */
 463         /* (a successfully received packet generates a special condition int) */
 464
 465         if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */
 466         {
 467                 if(status & DCD)                /* DCD is now ON */
 468                 {
 469                         start_hunt(scc);
 470                         scc->dcd = 1;
 471                 } else {                        /* DCD is now OFF */
 472                         cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */
 473                         flush_rx_FIFO(scc);
 474                         scc->dcd = 0;
 475                 }
 476
 477                 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
 478         }
 479
 480 #ifdef notdef
 481         /* CTS: use external TxDelay (what's that good for?!)
 482          * Anyway: If we _could_ use it (BayCom USCC uses CTS for
 483          * own purposes) we _should_ use the "autoenable" feature
 484          * of the Z8530 and not this interrupt...
 485          */
 486
 487         if (chg_and_stat & CTS)                 /* CTS is now ON */
 488         {
 489                 if (scc->kiss.txdelay == 0)     /* zero TXDELAY = wait for CTS */
 490                         scc_start_tx_timer(scc, t_txdelay, 0);
 491         }
 492 #endif
 493
 494         if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM))
 495         {
 496                 scc->stat.tx_under++;     /* oops, an underrun! count 'em */
 497                 Outb(scc->ctrl, RES_EXT_INT);   /* reset ext/status interrupts */
 498
 499                 if (scc->tx_buff != NULL)
 500                 {
 501                         dev_kfree_skb_irq(scc->tx_buff);
 502                         scc->tx_buff = NULL;
 503                 }
 504
 505                 or(scc,R10,ABUNDER);
 506                 scc_start_tx_timer(scc, t_txdelay, 0);  /* restart transmission */
 507         }
 508
 509         scc->status = status;
 510         Outb(scc->ctrl,RES_EXT_INT);
 511 }
 512
 513
 514 /* Receiver interrupt handler */
 515 static inline void scc_rxint(struct scc_channel *scc)
 516 {
 517         struct sk_buff *skb;
 518
 519         scc->stat.rxints++;
 520
 521         if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF)
 522         {
 523                 Inb(scc->data);         /* discard char */
 524                 or(scc,R3,ENT_HM);      /* enter hunt mode for next flag */
 525                 return;
 526         }
 527
 528         skb = scc->rx_buff;
 529
 530         if (skb == NULL)
 531         {
 532                 skb = dev_alloc_skb(scc->stat.bufsize);
 533                 if (skb == NULL)
 534                 {
 535                         scc->dev_stat.rx_dropped++;
 536                         scc->stat.nospace++;
 537                         Inb(scc->data);
 538                         or(scc, R3, ENT_HM);
 539                         return;
 540                 }
 541
 542                 scc->rx_buff = skb;
 543                 *(skb_put(skb, 1)) = 0; /* KISS data */
 544         }
 545
 546         if (skb->len >= scc->stat.bufsize)
 547         {
 548 #ifdef notdef
 549                 printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n");
 550 #endif
 551                 dev_kfree_skb_irq(skb);
 552                 scc->rx_buff = NULL;
 553                 Inb(scc->data);
 554                 or(scc, R3, ENT_HM);
 555                 return;
 556         }
 557
 558         *(skb_put(skb, 1)) = Inb(scc->data);
 559 }
 560
 561
 562 /* Receive Special Condition interrupt handler */
 563 static inline void scc_spint(struct scc_channel *scc)
 564 {
 565         unsigned char status;
 566         struct sk_buff *skb;
 567
 568         scc->stat.spints++;
 569
 570         status = InReg(scc->ctrl,R1);           /* read receiver status */
 571
 572         Inb(scc->data);                         /* throw away Rx byte */
 573         skb = scc->rx_buff;
 574
 575         if(status & Rx_OVR)                     /* receiver overrun */
 576         {
 577                 scc->stat.rx_over++;             /* count them */
 578                 or(scc,R3,ENT_HM);               /* enter hunt mode for next flag */
 579
 580                 if (skb != NULL)
 581                         dev_kfree_skb_irq(skb);
 582                 scc->rx_buff = skb = NULL;
 583         }
 584
 585         if(status & END_FR && skb != NULL)      /* end of frame */
 586         {
 587                 /* CRC okay, frame ends on 8 bit boundary and received something ? */
 588
 589                 if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0)
 590                 {
 591                         /* ignore last received byte (first of the CRC bytes) */
 592                         skb_trim(skb, skb->len-1);
 593                         scc_net_rx(scc, skb);
 594                         scc->rx_buff = NULL;
 595                         scc->stat.rxframes++;
 596                 } else {                                /* a bad frame */
 597                         dev_kfree_skb_irq(skb);
 598                         scc->rx_buff = NULL;
 599                         scc->stat.rxerrs++;
 600                 }
 601         }
 602
 603         Outb(scc->ctrl,ERR_RES);
 604 }
 605
 606
 607 /* ----> interrupt service routine for the Z8530 <---- */
 608
 609 static void scc_isr_dispatch(struct scc_channel *scc, int vector)
 610 {
 611         spin_lock(&scc->lock);
 612         switch (vector & VECTOR_MASK)
 613         {
 614                 case TXINT: scc_txint(scc); break;
 615                 case EXINT: scc_exint(scc); break;
 616                 case RXINT: scc_rxint(scc); break;
 617                 case SPINT: scc_spint(scc); break;
 618         }
 619         spin_unlock(&scc->lock);
 620 }
 621
 622 /* If the card has a latch for the interrupt vector (like the PA0HZP card)
 623    use it to get the number of the chip that generated the int.
 624    If not: poll all defined chips.
 625  */
 626
 627 #define SCC_IRQTIMEOUT 30000
 628
 629 static irqreturn_t scc_isr(int irq, void *dev_id)
 630 {
 631         int chip_irq = (long) dev_id;
 632         unsigned char vector;
 633         struct scc_channel *scc;
 634         struct scc_ctrl *ctrl;
 635         int k;
 636
 637         if (Vector_Latch)
 638         {
 639                 for(k=0; k < SCC_IRQTIMEOUT; k++)
 640                 {
 641                         Outb(Vector_Latch, 0);      /* Generate INTACK */
 642
 643                         /* Read the vector */
 644                         if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break;
 645                         if (vector & 0x01) break;
 646
 647                         scc=&SCC_Info[vector >> 3 ^ 0x01];
 648                         if (!scc->dev) break;
 649
 650                         scc_isr_dispatch(scc, vector);
 651
 652                         OutReg(scc->ctrl,R0,RES_H_IUS);              /* Reset Highest IUS */
 653                 }
 654
 655                 if (k == SCC_IRQTIMEOUT)
 656                         printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n");
 657
 658                 return IRQ_HANDLED;
 659         }
 660
 661         /* Find the SCC generating the interrupt by polling all attached SCCs
 662          * reading RR3A (the interrupt pending register)
 663          */
 664
 665         ctrl = SCC_ctrl;
 666         while (ctrl->chan_A)
 667         {
 668                 if (ctrl->irq != chip_irq)
 669                 {
 670                         ctrl++;
 671                         continue;
 672                 }
 673
 674                 scc = NULL;
 675                 for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++)
 676                 {
 677                         vector=InReg(ctrl->chan_B,R2);  /* Read the vector */
 678                         if (vector & 0x01) break;
 679
 680                         scc = &SCC_Info[vector >> 3 ^ 0x01];
 681                         if (!scc->dev) break;
 682
 683                         scc_isr_dispatch(scc, vector);
 684                 }
 685
 686                 if (k == SCC_IRQTIMEOUT)
 687                 {
 688                         printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n");
 689                         break;
 690                 }
 691
 692                 /* This looks weird and it is. At least the BayCom USCC doesn't
 693                  * use the Interrupt Daisy Chain, thus we'll have to start
 694                  * all over again to be sure not to miss an interrupt from
 695                  * (any of) the other chip(s)...
 696                  * Honestly, the situation *is* braindamaged...
 697                  */
 698
 699                 if (scc != NULL)
 700                 {
 701                         OutReg(scc->ctrl,R0,RES_H_IUS);
 702                         ctrl = SCC_ctrl;
 703                 } else
 704                         ctrl++;
 705         }
 706         return IRQ_HANDLED;
 707 }
 708
 709
 710
 711 /* ******************************************************************** */
 712 /* *                    Init Channel                                    */
 713 /* ******************************************************************** */
 714
 715
 716 /* ----> set SCC channel speed <---- */
 717
 718 static inline void set_brg(struct scc_channel *scc, unsigned int tc)
 719 {
 720         cl(scc,R14,BRENABL);            /* disable baudrate generator */
 721         wr(scc,R12,tc & 255);           /* brg rate LOW */
 722         wr(scc,R13,tc >> 8);            /* brg rate HIGH */
 723         or(scc,R14,BRENABL);            /* enable baudrate generator */
 724 }
 725
 726 static inline void set_speed(struct scc_channel *scc)
 727 {
 728         unsigned long flags;
 729         spin_lock_irqsave(&scc->lock, flags);
 730
 731         if (scc->modem.speed > 0)       /* paranoia... */
 732                 set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2);
 733
 734         spin_unlock_irqrestore(&scc->lock, flags);
 735 }
 736
 737
 738 /* ----> initialize a SCC channel <---- */
 739
 740 static inline void init_brg(struct scc_channel *scc)
 741 {
 742         wr(scc, R14, BRSRC);                            /* BRG source = PCLK */
 743         OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]);    /* DPLL source = BRG */
 744         OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]);   /* DPLL NRZI mode */
 745 }
 746
 747 /*
 748  * Initialization according to the Z8530 manual (SGS-Thomson's version):
 749  *
 750  * 1. Modes and constants
 751  *
 752  * WR9  11000000        chip reset
 753  * WR4  XXXXXXXX        Tx/Rx control, async or sync mode
 754  * WR1  0XX00X00        select W/REQ (optional)
 755  * WR2  XXXXXXXX        program interrupt vector
 756  * WR3  XXXXXXX0        select Rx control
 757  * WR5  XXXX0XXX        select Tx control
 758  * WR6  XXXXXXXX        sync character
 759  * WR7  XXXXXXXX        sync character
 760  * WR9  000X0XXX        select interrupt control
 761  * WR10 XXXXXXXX        miscellaneous control (optional)
 762  * WR11 XXXXXXXX        clock control
 763  * WR12 XXXXXXXX        time constant lower byte (optional)
 764  * WR13 XXXXXXXX        time constant upper byte (optional)
 765  * WR14 XXXXXXX0        miscellaneous control
 766  * WR14 XXXSSSSS        commands (optional)
 767  *
 768  * 2. Enables
 769  *
 770  * WR14 000SSSS1        baud rate enable
 771  * WR3  SSSSSSS1        Rx enable
 772  * WR5  SSSS1SSS        Tx enable
 773  * WR0  10000000        reset Tx CRG (optional)
 774  * WR1  XSS00S00        DMA enable (optional)
 775  *
 776  * 3. Interrupt status
 777  *
 778  * WR15 XXXXXXXX        enable external/status
 779  * WR0  00010000        reset external status
 780  * WR0  00010000        reset external status twice
 781  * WR1  SSSXXSXX        enable Rx, Tx and Ext/status
 782  * WR9  000SXSSS        enable master interrupt enable
 783  *
 784  * 1 = set to one, 0 = reset to zero
 785  * X = user defined, S = same as previous init
 786  *
 787  *
 788  * Note that the implementation differs in some points from above scheme.
 789  *
 790  */
 791
 792 static void init_channel(struct scc_channel *scc)
 793 {
 794         del_timer(&scc->tx_t);
 795         del_timer(&scc->tx_wdog);
 796
 797         disable_irq(scc->irq);
 798
 799         wr(scc,R4,X1CLK|SDLC);          /* *1 clock, SDLC mode */
 800         wr(scc,R1,0);                   /* no W/REQ operation */
 801         wr(scc,R3,Rx8|RxCRC_ENAB);      /* RX 8 bits/char, CRC, disabled */
 802         wr(scc,R5,Tx8|DTR|TxCRC_ENAB);  /* TX 8 bits/char, disabled, DTR */
 803         wr(scc,R6,0);                   /* SDLC address zero (not used) */
 804         wr(scc,R7,FLAG);                /* SDLC flag value */
 805         wr(scc,R9,VIS);                 /* vector includes status */
 806         wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */
 807         wr(scc,R14, 0);
 808
 809
 810 /* set clock sources:
 811
 812    CLK_DPLL: normal halfduplex operation
 813
 814                 RxClk: use DPLL
 815                 TxClk: use DPLL
 816                 TRxC mode DPLL output
 817
 818    CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem)
 819
 820                 BayCom:                 others:
 821
 822                 TxClk = pin RTxC        TxClk = pin TRxC
 823                 RxClk = pin TRxC        RxClk = pin RTxC
 824
 825
 826    CLK_DIVIDER:
 827                 RxClk = use DPLL
 828                 TxClk = pin RTxC
 829
 830                 BayCom:                 others:
 831                 pin TRxC = DPLL         pin TRxC = BRG
 832                 (RxClk * 1)             (RxClk * 32)
 833 */
 834
 835
 836         switch(scc->modem.clocksrc)
 837         {
 838                 case CLK_DPLL:
 839                         wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
 840                         init_brg(scc);
 841                         break;
 842
 843                 case CLK_DIVIDER:
 844                         wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI);
 845                         init_brg(scc);
 846                         break;
 847
 848                 case CLK_EXTERNAL:
 849                         wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP);
 850                         OutReg(scc->ctrl, R14, DISDPLL);
 851                         break;
 852
 853         }
 854
 855         set_speed(scc);                 /* set baudrate */
 856
 857         if(scc->enhanced)
 858         {
 859                 or(scc,R15,SHDLCE|FIFOE);       /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */
 860                 wr(scc,R7,AUTOEOM);
 861         }
 862
 863         if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD))
 864                                                 /* DCD is now ON */
 865         {
 866                 start_hunt(scc);
 867         }
 868
 869         /* enable ABORT, DCD & SYNC/HUNT interrupts */
 870
 871         wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE));
 872
 873         Outb(scc->ctrl,RES_EXT_INT);    /* reset ext/status interrupts */
 874         Outb(scc->ctrl,RES_EXT_INT);    /* must be done twice */
 875
 876         or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */
 877
 878         scc->status = InReg(scc->ctrl,R0);      /* read initial status */
 879
 880         or(scc,R9,MIE);                 /* master interrupt enable */
 881
 882         scc_init_timer(scc);
 883
 884         enable_irq(scc->irq);
 885 }
 886
 887
 888
 889
 890 /* ******************************************************************** */
 891 /* *                    SCC timer functions                           * */
 892 /* ******************************************************************** */
 893
 894
 895 /* ----> scc_key_trx sets the time constant for the baudrate
 896          generator and keys the transmitter                  <---- */
 897
 898 static void scc_key_trx(struct scc_channel *scc, char tx)
 899 {
 900         unsigned int time_const;
 901
 902         if (scc->brand & PRIMUS)
 903                 Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0));
 904
 905         if (scc->modem.speed < 300)
 906                 scc->modem.speed = 1200;
 907
 908         time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2;
 909
 910         disable_irq(scc->irq);
 911
 912         if (tx)
 913         {
 914                 or(scc, R1, TxINT_ENAB);        /* t_maxkeyup may have reset these */
 915                 or(scc, R15, TxUIE);
 916         }
 917
 918         if (scc->modem.clocksrc == CLK_DPLL)
 919         {                               /* force simplex operation */
 920                 if (tx)
 921                 {
 922 #ifdef CONFIG_SCC_TRXECHO
 923                         cl(scc, R3, RxENABLE|ENT_HM);   /* switch off receiver */
 924                         cl(scc, R15, DCDIE|SYNCIE);     /* No DCD changes, please */
 925 #endif
 926                         set_brg(scc, time_const);       /* reprogram baudrate generator */
 927
 928                         /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */
 929                         wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR);
 930
 931                         /* By popular demand: tx_inhibit */
 932                         if (scc->kiss.tx_inhibit)
 933                         {
 934                                 or(scc,R5, TxENAB);
 935                                 scc->wreg[R5] |= RTS;
 936                         } else {
 937                                 or(scc,R5,RTS|TxENAB);  /* set the RTS line and enable TX */
 938                         }
 939                 } else {
 940                         cl(scc,R5,RTS|TxENAB);
 941
 942                         set_brg(scc, time_const);       /* reprogram baudrate generator */
 943
 944                         /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */
 945                         wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
 946
 947 #ifndef CONFIG_SCC_TRXECHO
 948                         if (scc->kiss.softdcd)
 949 #endif
 950                         {
 951                                 or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE);
 952                                 start_hunt(scc);
 953                         }
 954                 }
 955         } else {
 956                 if (tx)
 957                 {
 958 #ifdef CONFIG_SCC_TRXECHO
 959                         if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
 960                         {
 961                                 cl(scc, R3, RxENABLE);
 962                                 cl(scc, R15, DCDIE|SYNCIE);
 963                         }
 964 #endif
 965
 966                         if (scc->kiss.tx_inhibit)
 967                         {
 968                                 or(scc,R5, TxENAB);
 969                                 scc->wreg[R5] |= RTS;
 970                         } else {
 971                                 or(scc,R5,RTS|TxENAB);  /* enable tx */
 972                         }
 973                 } else {
 974                         cl(scc,R5,RTS|TxENAB);          /* disable tx */
 975
 976                         if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) &&
 977 #ifndef CONFIG_SCC_TRXECHO
 978                             scc->kiss.softdcd)
 979 #else
 980                             1)
 981 #endif
 982                         {
 983                                 or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE);
 984                                 start_hunt(scc);
 985                         }
 986                 }
 987         }
 988
 989         enable_irq(scc->irq);
 990 }
 991
 992
 993 /* ----> SCC timer interrupt handler and friends. <---- */
 994
 995 static void __scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
 996 {
 997         del_timer(&scc->tx_t);
 998
 999         if (when == 0)
1000         {
1001                 handler((unsigned long) scc);
1002         } else
1003         if (when != TIMER_OFF)
1004         {
1005                 scc->tx_t.data = (unsigned long) scc;
1006                 scc->tx_t.function = handler;
1007                 scc->tx_t.expires = jiffies + (when*HZ)/100;
1008                 add_timer(&scc->tx_t);
1009         }
1010 }
1011
1012 static void scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
1013 {
1014         unsigned long flags;
1015
1016         spin_lock_irqsave(&scc->lock, flags);
1017         __scc_start_tx_timer(scc, handler, when);
1018         spin_unlock_irqrestore(&scc->lock, flags);
1019 }
1020
1021 static void scc_start_defer(struct scc_channel *scc)
1022 {
1023         unsigned long flags;
1024
1025         spin_lock_irqsave(&scc->lock, flags);
1026         del_timer(&scc->tx_wdog);
1027
1028         if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF)
1029         {
1030                 scc->tx_wdog.data = (unsigned long) scc;
1031                 scc->tx_wdog.function = t_busy;
1032                 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer;
1033                 add_timer(&scc->tx_wdog);
1034         }
1035         spin_unlock_irqrestore(&scc->lock, flags);
1036 }
1037
1038 static void scc_start_maxkeyup(struct scc_channel *scc)
1039 {
1040         unsigned long flags;
1041
1042         spin_lock_irqsave(&scc->lock, flags);
1043         del_timer(&scc->tx_wdog);
1044
1045         if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF)
1046         {
1047                 scc->tx_wdog.data = (unsigned long) scc;
1048                 scc->tx_wdog.function = t_maxkeyup;
1049                 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup;
1050                 add_timer(&scc->tx_wdog);
1051         }
1052         spin_unlock_irqrestore(&scc->lock, flags);
1053 }
1054
1055 /*
1056  * This is called from scc_txint() when there are no more frames to send.
1057  * Not exactly a timer function, but it is a close friend of the family...
1058  */
1059
1060 static void scc_tx_done(struct scc_channel *scc)
1061 {
1062         /*
1063          * trx remains keyed in fulldup mode 2 until t_idle expires.
1064          */
1065
1066         switch (scc->kiss.fulldup)
1067         {
1068                 case KISS_DUPLEX_LINK:
1069                         scc->stat.tx_state = TXS_IDLE2;
1070                         if (scc->kiss.idletime != TIMER_OFF)
1071                                 scc_start_tx_timer(scc, t_idle,
1072                                                    scc->kiss.idletime*100);
1073                         break;
1074                 case KISS_DUPLEX_OPTIMA:
1075                         scc_notify(scc, HWEV_ALL_SENT);
1076                         break;
1077                 default:
1078                         scc->stat.tx_state = TXS_BUSY;
1079                         scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1080         }
1081
1082         netif_wake_queue(scc->dev);
1083 }
1084
1085
1086 static unsigned char Rand = 17;
1087
1088 static inline int is_grouped(struct scc_channel *scc)
1089 {
1090         int k;
1091         struct scc_channel *scc2;
1092         unsigned char grp1, grp2;
1093
1094         grp1 = scc->kiss.group;
1095
1096         for (k = 0; k < (Nchips * 2); k++)
1097         {
1098                 scc2 = &SCC_Info[k];
1099                 grp2 = scc2->kiss.group;
1100
1101                 if (scc2 == scc || !(scc2->dev && grp2))
1102                         continue;
1103
1104                 if ((grp1 & 0x3f) == (grp2 & 0x3f))
1105                 {
1106                         if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) )
1107                                 return 1;
1108
1109                         if ( (grp1 & RXGROUP) && scc2->dcd )
1110                                 return 1;
1111                 }
1112         }
1113         return 0;
1114 }
1115
1116 /* DWAIT and SLOTTIME expired
1117  *
1118  * fulldup == 0:  DCD is active or Rand > P-persistence: start t_busy timer
1119  *                else key trx and start txdelay
1120  * fulldup == 1:  key trx and start txdelay
1121  * fulldup == 2:  mintime expired, reset status or key trx and start txdelay
1122  */
1123
1124 static void t_dwait(unsigned long channel)
1125 {
1126         struct scc_channel *scc = (struct scc_channel *) channel;
1127
1128         if (scc->stat.tx_state == TXS_WAIT)     /* maxkeyup or idle timeout */
1129         {
1130                 if (skb_queue_empty(&scc->tx_queue)) {  /* nothing to send */
1131                         scc->stat.tx_state = TXS_IDLE;
1132                         netif_wake_queue(scc->dev);     /* t_maxkeyup locked it. */
1133                         return;
1134                 }
1135
1136                 scc->stat.tx_state = TXS_BUSY;
1137         }
1138
1139         if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
1140         {
1141                 Rand = Rand * 17 + 31;
1142
1143                 if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) )
1144                 {
1145                         scc_start_defer(scc);
1146                         scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime);
1147                         return ;
1148                 }
1149         }
1150
1151         if ( !(scc->wreg[R5] & RTS) )
1152         {
1153                 scc_key_trx(scc, TX_ON);
1154                 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
1155         } else {
1156                 scc_start_tx_timer(scc, t_txdelay, 0);
1157         }
1158 }
1159
1160
1161 /* TXDELAY expired
1162  *
1163  * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog.
1164  */
1165
1166 static void t_txdelay(unsigned long channel)
1167 {
1168         struct scc_channel *scc = (struct scc_channel *) channel;
1169
1170         scc_start_maxkeyup(scc);
1171
1172         if (scc->tx_buff == NULL)
1173         {
1174                 disable_irq(scc->irq);
1175                 scc_txint(scc);
1176                 enable_irq(scc->irq);
1177         }
1178 }
1179
1180
1181 /* TAILTIME expired
1182  *
1183  * switch off transmitter. If we were stopped by Maxkeyup restart
1184  * transmission after 'mintime' seconds
1185  */
1186
1187 static void t_tail(unsigned long channel)
1188 {
1189         struct scc_channel *scc = (struct scc_channel *) channel;
1190         unsigned long flags;
1191
1192         spin_lock_irqsave(&scc->lock, flags);
1193         del_timer(&scc->tx_wdog);
1194         scc_key_trx(scc, TX_OFF);
1195         spin_unlock_irqrestore(&scc->lock, flags);
1196
1197         if (scc->stat.tx_state == TXS_TIMEOUT)          /* we had a timeout? */
1198         {
1199                 scc->stat.tx_state = TXS_WAIT;
1200                 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
1201                 return;
1202         }
1203
1204         scc->stat.tx_state = TXS_IDLE;
1205         netif_wake_queue(scc->dev);
1206 }
1207
1208
1209 /* BUSY timeout
1210  *
1211  * throw away send buffers if DCD remains active too long.
1212  */
1213
1214 static void t_busy(unsigned long channel)
1215 {
1216         struct scc_channel *scc = (struct scc_channel *) channel;
1217
1218         del_timer(&scc->tx_t);
1219         netif_stop_queue(scc->dev);     /* don't pile on the wabbit! */
1220
1221         scc_discard_buffers(scc);
1222         scc->stat.txerrs++;
1223         scc->stat.tx_state = TXS_IDLE;
1224
1225         netif_wake_queue(scc->dev);
1226 }
1227
1228 /* MAXKEYUP timeout
1229  *
1230  * this is our watchdog.
1231  */
1232
1233 static void t_maxkeyup(unsigned long channel)
1234 {
1235         struct scc_channel *scc = (struct scc_channel *) channel;
1236         unsigned long flags;
1237
1238         spin_lock_irqsave(&scc->lock, flags);
1239         /*
1240          * let things settle down before we start to
1241          * accept new data.
1242          */
1243
1244         netif_stop_queue(scc->dev);
1245         scc_discard_buffers(scc);
1246
1247         del_timer(&scc->tx_t);
1248
1249         cl(scc, R1, TxINT_ENAB);        /* force an ABORT, but don't */
1250         cl(scc, R15, TxUIE);            /* count it. */
1251         OutReg(scc->ctrl, R0, RES_Tx_P);
1252
1253         spin_unlock_irqrestore(&scc->lock, flags);
1254
1255         scc->stat.txerrs++;
1256         scc->stat.tx_state = TXS_TIMEOUT;
1257         scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1258 }
1259
1260 /* IDLE timeout
1261  *
1262  * in fulldup mode 2 it keys down the transmitter after 'idle' seconds
1263  * of inactivity. We will not restart transmission before 'mintime'
1264  * expires.
1265  */
1266
1267 static void t_idle(unsigned long channel)
1268 {
1269         struct scc_channel *scc = (struct scc_channel *) channel;
1270
1271         del_timer(&scc->tx_wdog);
1272
1273         scc_key_trx(scc, TX_OFF);
1274         if(scc->kiss.mintime)
1275                 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
1276         scc->stat.tx_state = TXS_WAIT;
1277 }
1278
1279 static void scc_init_timer(struct scc_channel *scc)
1280 {
1281         unsigned long flags;
1282
1283         spin_lock_irqsave(&scc->lock, flags);
1284         scc->stat.tx_state = TXS_IDLE;
1285         spin_unlock_irqrestore(&scc->lock, flags);
1286 }
1287
1288
1289 /* ******************************************************************** */
1290 /* *                    Set/get L1 parameters                         * */
1291 /* ******************************************************************** */
1292
1293
1294 /*
1295  * this will set the "hardware" parameters through KISS commands or ioctl()
1296  */
1297
1298 #define CAST(x) (unsigned long)(x)
1299
1300 static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg)
1301 {
1302         switch (cmd)
1303         {
1304                 case PARAM_TXDELAY:     scc->kiss.txdelay=arg;          break;
1305                 case PARAM_PERSIST:     scc->kiss.persist=arg;          break;
1306                 case PARAM_SLOTTIME:    scc->kiss.slottime=arg;         break;
1307                 case PARAM_TXTAIL:      scc->kiss.tailtime=arg;         break;
1308                 case PARAM_FULLDUP:     scc->kiss.fulldup=arg;          break;
1309                 case PARAM_DTR:         break; /* does someone need this? */
1310                 case PARAM_GROUP:       scc->kiss.group=arg;            break;
1311                 case PARAM_IDLE:        scc->kiss.idletime=arg;         break;
1312                 case PARAM_MIN:         scc->kiss.mintime=arg;          break;
1313                 case PARAM_MAXKEY:      scc->kiss.maxkeyup=arg;         break;
1314                 case PARAM_WAIT:        scc->kiss.waittime=arg;         break;
1315                 case PARAM_MAXDEFER:    scc->kiss.maxdefer=arg;         break;
1316                 case PARAM_TX:          scc->kiss.tx_inhibit=arg;       break;
1317
1318                 case PARAM_SOFTDCD:
1319                         scc->kiss.softdcd=arg;
1320                         if (arg)
1321                         {
1322                                 or(scc, R15, SYNCIE);
1323                                 cl(scc, R15, DCDIE);
1324                                 start_hunt(scc);
1325                         } else {
1326                                 or(scc, R15, DCDIE);
1327                                 cl(scc, R15, SYNCIE);
1328                         }
1329                         break;
1330
1331                 case PARAM_SPEED:
1332                         if (arg < 256)
1333                                 scc->modem.speed=arg*100;
1334                         else
1335                                 scc->modem.speed=arg;
1336
1337                         if (scc->stat.tx_state == 0)    /* only switch baudrate on rx... ;-) */
1338                                 set_speed(scc);
1339                         break;
1340
1341                 case PARAM_RTS:
1342                         if ( !(scc->wreg[R5] & RTS) )
1343                         {
1344                                 if (arg != TX_OFF) {
1345                                         scc_key_trx(scc, TX_ON);
1346                                         scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
1347                                 }
1348                         } else {
1349                                 if (arg == TX_OFF)
1350                                 {
1351                                         scc->stat.tx_state = TXS_BUSY;
1352                                         scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1353                                 }
1354                         }
1355                         break;
1356
1357                 case PARAM_HWEVENT:
1358                         scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
1359                         break;
1360
1361                 default:                return -EINVAL;
1362         }
1363
1364         return 0;
1365 }
1366
1367
1368
1369 static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd)
1370 {
1371         switch (cmd)
1372         {
1373                 case PARAM_TXDELAY:     return CAST(scc->kiss.txdelay);
1374                 case PARAM_PERSIST:     return CAST(scc->kiss.persist);
1375                 case PARAM_SLOTTIME:    return CAST(scc->kiss.slottime);
1376                 case PARAM_TXTAIL:      return CAST(scc->kiss.tailtime);
1377                 case PARAM_FULLDUP:     return CAST(scc->kiss.fulldup);
1378                 case PARAM_SOFTDCD:     return CAST(scc->kiss.softdcd);
1379                 case PARAM_DTR:         return CAST((scc->wreg[R5] & DTR)? 1:0);
1380                 case PARAM_RTS:         return CAST((scc->wreg[R5] & RTS)? 1:0);
1381                 case PARAM_SPEED:       return CAST(scc->modem.speed);
1382                 case PARAM_GROUP:       return CAST(scc->kiss.group);
1383                 case PARAM_IDLE:        return CAST(scc->kiss.idletime);
1384                 case PARAM_MIN:         return CAST(scc->kiss.mintime);
1385                 case PARAM_MAXKEY:      return CAST(scc->kiss.maxkeyup);
1386                 case PARAM_WAIT:        return CAST(scc->kiss.waittime);
1387                 case PARAM_MAXDEFER:    return CAST(scc->kiss.maxdefer);
1388                 case PARAM_TX:          return CAST(scc->kiss.tx_inhibit);
1389                 default:                return NO_SUCH_PARAM;
1390         }
1391
1392 }
1393
1394 #undef CAST
1395
1396 /* ******************************************************************* */
1397 /* *                    Send calibration pattern                     * */
1398 /* ******************************************************************* */
1399
1400 static void scc_stop_calibrate(unsigned long channel)
1401 {
1402         struct scc_channel *scc = (struct scc_channel *) channel;
1403         unsigned long flags;
1404
1405         spin_lock_irqsave(&scc->lock, flags);
1406         del_timer(&scc->tx_wdog);
1407         scc_key_trx(scc, TX_OFF);
1408         wr(scc, R6, 0);
1409         wr(scc, R7, FLAG);
1410         Outb(scc->ctrl,RES_EXT_INT);    /* reset ext/status interrupts */
1411         Outb(scc->ctrl,RES_EXT_INT);
1412
1413         netif_wake_queue(scc->dev);
1414         spin_unlock_irqrestore(&scc->lock, flags);
1415 }
1416
1417
1418 static void
1419 scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern)
1420 {
1421         unsigned long flags;
1422
1423         spin_lock_irqsave(&scc->lock, flags);
1424         netif_stop_queue(scc->dev);
1425         scc_discard_buffers(scc);
1426
1427         del_timer(&scc->tx_wdog);
1428
1429         scc->tx_wdog.data = (unsigned long) scc;
1430         scc->tx_wdog.function = scc_stop_calibrate;
1431         scc->tx_wdog.expires = jiffies + HZ*duration;
1432         add_timer(&scc->tx_wdog);
1433
1434         /* This doesn't seem to work. Why not? */
1435         wr(scc, R6, 0);
1436         wr(scc, R7, pattern);
1437
1438         /*
1439          * Don't know if this works.
1440          * Damn, where is my Z8530 programming manual...?
1441          */
1442
1443         Outb(scc->ctrl,RES_EXT_INT);    /* reset ext/status interrupts */
1444         Outb(scc->ctrl,RES_EXT_INT);
1445
1446         scc_key_trx(scc, TX_ON);
1447         spin_unlock_irqrestore(&scc->lock, flags);
1448 }
1449
1450 /* ******************************************************************* */
1451 /* *            Init channel structures, special HW, etc...          * */
1452 /* ******************************************************************* */
1453
1454 /*
1455  * Reset the Z8530s and setup special hardware
1456  */
1457
1458 static void z8530_init(void)
1459 {
1460         struct scc_channel *scc;
1461         int chip, k;
1462         unsigned long flags;
1463         char *flag;
1464
1465
1466         printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2);
1467
1468         flag=" ";
1469         for (k = 0; k < nr_irqs; k++)
1470                 if (Ivec[k].used)
1471                 {
1472                         printk("%s%d", flag, k);
1473                         flag=",";
1474                 }
1475         printk("\n");
1476
1477
1478         /* reset and pre-init all chips in the system */
1479         for (chip = 0; chip < Nchips; chip++)
1480         {
1481                 scc=&SCC_Info[2*chip];
1482                 if (!scc->ctrl) continue;
1483
1484                 /* Special SCC cards */
1485
1486                 if(scc->brand & EAGLE)                  /* this is an EAGLE card */
1487                         Outb(scc->special,0x08);        /* enable interrupt on the board */
1488
1489                 if(scc->brand & (PC100 | PRIMUS))       /* this is a PC100/PRIMUS card */
1490                         Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */
1491
1492
1493                 /* Reset and pre-init Z8530 */
1494
1495                 spin_lock_irqsave(&scc->lock, flags);
1496
1497                 Outb(scc->ctrl, 0);
1498                 OutReg(scc->ctrl,R9,FHWRES);            /* force hardware reset */
1499                 udelay(100);                            /* give it 'a bit' more time than required */
1500                 wr(scc, R2, chip*16);                   /* interrupt vector */
1501                 wr(scc, R9, VIS);                       /* vector includes status */
1502                 spin_unlock_irqrestore(&scc->lock, flags);
1503         }
1504
1505
1506         Driver_Initialized = 1;
1507 }
1508
1509 /*
1510  * Allocate device structure, err, instance, and register driver
1511  */
1512
1513 static int scc_net_alloc(const char *name, struct scc_channel *scc)
1514 {
1515         int err;
1516         struct net_device *dev;
1517
1518         dev = alloc_netdev(0, name, NET_NAME_UNKNOWN, scc_net_setup);
1519         if (!dev)
1520                 return -ENOMEM;
1521
1522         dev->ml_priv = scc;
1523         scc->dev = dev;
1524         spin_lock_init(&scc->lock);
1525         init_timer(&scc->tx_t);
1526         init_timer(&scc->tx_wdog);
1527
1528         err = register_netdevice(dev);
1529         if (err) {
1530                 printk(KERN_ERR "%s: can't register network device (%d)\n",
1531                        name, err);
1532                 free_netdev(dev);
1533                 scc->dev = NULL;
1534                 return err;
1535         }
1536
1537         return 0;
1538 }
1539
1540
1541
1542 /* ******************************************************************** */
1543 /* *                        Network driver methods                    * */
1544 /* ******************************************************************** */
1545
1546 static const struct net_device_ops scc_netdev_ops = {
1547         .ndo_open            = scc_net_open,
1548         .ndo_stop            = scc_net_close,
1549         .ndo_start_xmit      = scc_net_tx,
1550         .ndo_set_mac_address = scc_net_set_mac_address,
1551         .ndo_get_stats       = scc_net_get_stats,
1552         .ndo_do_ioctl        = scc_net_ioctl,
1553 };
1554
1555 /* ----> Initialize device <----- */
1556
1557 static void scc_net_setup(struct net_device *dev)
1558 {
1559         dev->tx_queue_len    = 16;      /* should be enough... */
1560
1561         dev->netdev_ops      = &scc_netdev_ops;
1562         dev->header_ops      = &ax25_header_ops;
1563
1564         memcpy(dev->broadcast, &ax25_bcast,  AX25_ADDR_LEN);
1565         memcpy(dev->dev_addr,  &ax25_defaddr, AX25_ADDR_LEN);
1566
1567         dev->flags      = 0;
1568
1569         dev->type = ARPHRD_AX25;
1570         dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1571         dev->mtu = AX25_DEF_PACLEN;
1572         dev->addr_len = AX25_ADDR_LEN;
1573
1574 }
1575
1576 /* ----> open network device <---- */
1577
1578 static int scc_net_open(struct net_device *dev)
1579 {
1580         struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1581
1582         if (!scc->init)
1583                 return -EINVAL;
1584
1585         scc->tx_buff = NULL;
1586         skb_queue_head_init(&scc->tx_queue);
1587
1588         init_channel(scc);
1589
1590         netif_start_queue(dev);
1591         return 0;
1592 }
1593
1594 /* ----> close network device <---- */
1595
1596 static int scc_net_close(struct net_device *dev)
1597 {
1598         struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1599         unsigned long flags;
1600
1601         netif_stop_queue(dev);
1602
1603         spin_lock_irqsave(&scc->lock, flags);
1604         Outb(scc->ctrl,0);              /* Make sure pointer is written */
1605         wr(scc,R1,0);                   /* disable interrupts */
1606         wr(scc,R3,0);
1607         spin_unlock_irqrestore(&scc->lock, flags);
1608
1609         del_timer_sync(&scc->tx_t);
1610         del_timer_sync(&scc->tx_wdog);
1611
1612         scc_discard_buffers(scc);
1613
1614         return 0;
1615 }
1616
1617 /* ----> receive frame, called from scc_rxint() <---- */
1618
1619 static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb)
1620 {
1621         if (skb->len == 0) {
1622                 dev_kfree_skb_irq(skb);
1623                 return;
1624         }
1625
1626         scc->dev_stat.rx_packets++;
1627         scc->dev_stat.rx_bytes += skb->len;
1628
1629         skb->protocol = ax25_type_trans(skb, scc->dev);
1630
1631         netif_rx(skb);
1632 }
1633
1634 /* ----> transmit frame <---- */
1635
1636 static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev)
1637 {
1638         struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1639         unsigned long flags;
1640         char kisscmd;
1641
1642         if (skb->protocol == htons(ETH_P_IP))
1643                 return ax25_ip_xmit(skb);
1644
1645         if (skb->len > scc->stat.bufsize || skb->len < 2) {
1646                 scc->dev_stat.tx_dropped++;     /* bogus frame */
1647                 dev_kfree_skb(skb);
1648                 return NETDEV_TX_OK;
1649         }
1650
1651         scc->dev_stat.tx_packets++;
1652         scc->dev_stat.tx_bytes += skb->len;
1653         scc->stat.txframes++;
1654
1655         kisscmd = *skb->data & 0x1f;
1656         skb_pull(skb, 1);
1657
1658         if (kisscmd) {
1659                 scc_set_param(scc, kisscmd, *skb->data);
1660                 dev_kfree_skb(skb);
1661                 return NETDEV_TX_OK;
1662         }
1663
1664         spin_lock_irqsave(&scc->lock, flags);
1665
1666         if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) {
1667                 struct sk_buff *skb_del;
1668                 skb_del = skb_dequeue(&scc->tx_queue);
1669                 dev_kfree_skb(skb_del);
1670         }
1671         skb_queue_tail(&scc->tx_queue, skb);
1672         dev->trans_start = jiffies;
1673
1674
1675         /*
1676          * Start transmission if the trx state is idle or
1677          * t_idle hasn't expired yet. Use dwait/persistence/slottime
1678          * algorithm for normal halfduplex operation.
1679          */
1680
1681         if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) {
1682                 scc->stat.tx_state = TXS_BUSY;
1683                 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
1684                         __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime);
1685                 else
1686                         __scc_start_tx_timer(scc, t_dwait, 0);
1687         }
1688         spin_unlock_irqrestore(&scc->lock, flags);
1689         return NETDEV_TX_OK;
1690 }
1691
1692 /* ----> ioctl functions <---- */
1693
1694 /*
1695  * SIOCSCCCFG           - configure driver      arg: (struct scc_hw_config *) arg
1696  * SIOCSCCINI           - initialize driver     arg: ---
1697  * SIOCSCCCHANINI       - initialize channel    arg: (struct scc_modem *) arg
1698  * SIOCSCCSMEM          - set memory            arg: (struct scc_mem_config *) arg
1699  * SIOCSCCGKISS         - get level 1 parameter arg: (struct scc_kiss_cmd *) arg
1700  * SIOCSCCSKISS         - set level 1 parameter arg: (struct scc_kiss_cmd *) arg
1701  * SIOCSCCGSTAT         - get driver status     arg: (struct scc_stat *) arg
1702  * SIOCSCCCAL           - send calib. pattern   arg: (struct scc_calibrate *) arg
1703  */
1704
1705 static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1706 {
1707         struct scc_kiss_cmd kiss_cmd;
1708         struct scc_mem_config memcfg;
1709         struct scc_hw_config hwcfg;
1710         struct scc_calibrate cal;
1711         struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1712         int chan;
1713         unsigned char device_name[IFNAMSIZ];
1714         void __user *arg = ifr->ifr_data;
1715
1716
1717         if (!Driver_Initialized)
1718         {
1719                 if (cmd == SIOCSCCCFG)
1720                 {
1721                         int found = 1;
1722
1723                         if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1724                         if (!arg) return -EFAULT;
1725
1726                         if (Nchips >= SCC_MAXCHIPS)
1727                                 return -EINVAL;
1728
1729                         if (copy_from_user(&hwcfg, arg, sizeof(hwcfg)))
1730                                 return -EFAULT;
1731
1732                         if (hwcfg.irq == 2) hwcfg.irq = 9;
1733
1734                         if (hwcfg.irq < 0 || hwcfg.irq >= nr_irqs)
1735                                 return -EINVAL;
1736
1737                         if (!Ivec[hwcfg.irq].used && hwcfg.irq)
1738                         {
1739                                 if (request_irq(hwcfg.irq, scc_isr,
1740                                                 0, "AX.25 SCC",
1741                                                 (void *)(long) hwcfg.irq))
1742                                         printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq);
1743                                 else
1744                                         Ivec[hwcfg.irq].used = 1;
1745                         }
1746
1747                         if (hwcfg.vector_latch && !Vector_Latch) {
1748                                 if (!request_region(hwcfg.vector_latch, 1, "scc vector latch"))
1749                                         printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch);
1750                                 else
1751                                         Vector_Latch = hwcfg.vector_latch;
1752                         }
1753
1754                         if (hwcfg.clock == 0)
1755                                 hwcfg.clock = SCC_DEFAULT_CLOCK;
1756
1757 #ifndef SCC_DONT_CHECK
1758
1759                         if(request_region(hwcfg.ctrl_a, 1, "scc-probe"))
1760                         {
1761                                 disable_irq(hwcfg.irq);
1762                                 Outb(hwcfg.ctrl_a, 0);
1763                                 OutReg(hwcfg.ctrl_a, R9, FHWRES);
1764                                 udelay(100);
1765                                 OutReg(hwcfg.ctrl_a,R13,0x55);          /* is this chip really there? */
1766                                 udelay(5);
1767
1768                                 if (InReg(hwcfg.ctrl_a,R13) != 0x55)
1769                                         found = 0;
1770                                 enable_irq(hwcfg.irq);
1771                                 release_region(hwcfg.ctrl_a, 1);
1772                         }
1773                         else
1774                                 found = 0;
1775 #endif
1776
1777                         if (found)
1778                         {
1779                                 SCC_Info[2*Nchips  ].ctrl = hwcfg.ctrl_a;
1780                                 SCC_Info[2*Nchips  ].data = hwcfg.data_a;
1781                                 SCC_Info[2*Nchips  ].irq  = hwcfg.irq;
1782                                 SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b;
1783                                 SCC_Info[2*Nchips+1].data = hwcfg.data_b;
1784                                 SCC_Info[2*Nchips+1].irq  = hwcfg.irq;
1785
1786                                 SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a;
1787                                 SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b;
1788                                 SCC_ctrl[Nchips].irq    = hwcfg.irq;
1789                         }
1790
1791
1792                         for (chan = 0; chan < 2; chan++)
1793                         {
1794                                 sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan);
1795
1796                                 SCC_Info[2*Nchips+chan].special = hwcfg.special;
1797                                 SCC_Info[2*Nchips+chan].clock = hwcfg.clock;
1798                                 SCC_Info[2*Nchips+chan].brand = hwcfg.brand;
1799                                 SCC_Info[2*Nchips+chan].option = hwcfg.option;
1800                                 SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc;
1801
1802 #ifdef SCC_DONT_CHECK
1803                                 printk(KERN_INFO "%s: data port = 0x%3.3x  control port = 0x%3.3x\n",
1804                                         device_name,
1805                                         SCC_Info[2*Nchips+chan].data,
1806                                         SCC_Info[2*Nchips+chan].ctrl);
1807
1808 #else
1809                                 printk(KERN_INFO "%s: data port = 0x%3.3lx  control port = 0x%3.3lx -- %s\n",
1810                                         device_name,
1811                                         chan? hwcfg.data_b : hwcfg.data_a,
1812                                         chan? hwcfg.ctrl_b : hwcfg.ctrl_a,
1813                                         found? "found" : "missing");
1814 #endif
1815
1816                                 if (found)
1817                                 {
1818                                         request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl");
1819                                         request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data");
1820                                         if (Nchips+chan != 0 &&
1821                                             scc_net_alloc(device_name,
1822                                                           &SCC_Info[2*Nchips+chan]))
1823                                             return -EINVAL;
1824                                 }
1825                         }
1826
1827                         if (found) Nchips++;
1828
1829                         return 0;
1830                 }
1831
1832                 if (cmd == SIOCSCCINI)
1833                 {
1834                         if (!capable(CAP_SYS_RAWIO))
1835                                 return -EPERM;
1836
1837                         if (Nchips == 0)
1838                                 return -EINVAL;
1839
1840                         z8530_init();
1841                         return 0;
1842                 }
1843
1844                 return -EINVAL; /* confuse the user */
1845         }
1846
1847         if (!scc->init)
1848         {
1849                 if (cmd == SIOCSCCCHANINI)
1850                 {
1851                         if (!capable(CAP_NET_ADMIN)) return -EPERM;
1852                         if (!arg) return -EINVAL;
1853
1854                         scc->stat.bufsize   = SCC_BUFSIZE;
1855
1856                         if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem)))
1857                                 return -EINVAL;
1858
1859                         /* default KISS Params */
1860
1861                         if (scc->modem.speed < 4800)
1862                         {
1863                                 scc->kiss.txdelay = 36;         /* 360 ms */
1864                                 scc->kiss.persist = 42;         /* 25% persistence */                   /* was 25 */
1865                                 scc->kiss.slottime = 16;        /* 160 ms */
1866                                 scc->kiss.tailtime = 4;         /* minimal reasonable value */
1867                                 scc->kiss.fulldup = 0;          /* CSMA */
1868                                 scc->kiss.waittime = 50;        /* 500 ms */
1869                                 scc->kiss.maxkeyup = 10;        /* 10 s */
1870                                 scc->kiss.mintime = 3;          /* 3 s */
1871                                 scc->kiss.idletime = 30;        /* 30 s */
1872                                 scc->kiss.maxdefer = 120;       /* 2 min */
1873                                 scc->kiss.softdcd = 0;          /* hardware dcd */
1874                         } else {
1875                                 scc->kiss.txdelay = 10;         /* 100 ms */
1876                                 scc->kiss.persist = 64;         /* 25% persistence */                   /* was 25 */
1877                                 scc->kiss.slottime = 8;         /* 160 ms */
1878                                 scc->kiss.tailtime = 1;         /* minimal reasonable value */
1879                                 scc->kiss.fulldup = 0;          /* CSMA */
1880                                 scc->kiss.waittime = 50;        /* 500 ms */
1881                                 scc->kiss.maxkeyup = 7;         /* 7 s */
1882                                 scc->kiss.mintime = 3;          /* 3 s */
1883                                 scc->kiss.idletime = 30;        /* 30 s */
1884                                 scc->kiss.maxdefer = 120;       /* 2 min */
1885                                 scc->kiss.softdcd = 0;          /* hardware dcd */
1886                         }
1887
1888                         scc->tx_buff = NULL;
1889                         skb_queue_head_init(&scc->tx_queue);
1890                         scc->init = 1;
1891
1892                         return 0;
1893                 }
1894
1895                 return -EINVAL;
1896         }
1897
1898         switch(cmd)
1899         {
1900                 case SIOCSCCRESERVED:
1901                         return -ENOIOCTLCMD;
1902
1903                 case SIOCSCCSMEM:
1904                         if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1905                         if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg)))
1906                                 return -EINVAL;
1907                         scc->stat.bufsize   = memcfg.bufsize;
1908                         return 0;
1909
1910                 case SIOCSCCGSTAT:
1911                         if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat)))
1912                                 return -EINVAL;
1913                         return 0;
1914
1915                 case SIOCSCCGKISS:
1916                         if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
1917                                 return -EINVAL;
1918                         kiss_cmd.param = scc_get_param(scc, kiss_cmd.command);
1919                         if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd)))
1920                                 return -EINVAL;
1921                         return 0;
1922
1923                 case SIOCSCCSKISS:
1924                         if (!capable(CAP_NET_ADMIN)) return -EPERM;
1925                         if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
1926                                 return -EINVAL;
1927                         return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param);
1928
1929                 case SIOCSCCCAL:
1930                         if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1931                         if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0)
1932                                 return -EINVAL;
1933
1934                         scc_start_calibrate(scc, cal.time, cal.pattern);
1935                         return 0;
1936
1937                 default:
1938                         return -ENOIOCTLCMD;
1939
1940         }
1941
1942         return -EINVAL;
1943 }
1944
1945 /* ----> set interface callsign <---- */
1946
1947 static int scc_net_set_mac_address(struct net_device *dev, void *addr)
1948 {
1949         struct sockaddr *sa = (struct sockaddr *) addr;
1950         memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
1951         return 0;
1952 }
1953
1954 /* ----> get statistics <---- */
1955
1956 static struct net_device_stats *scc_net_get_stats(struct net_device *dev)
1957 {
1958         struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1959
1960         scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over;
1961         scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under;
1962         scc->dev_stat.rx_fifo_errors = scc->stat.rx_over;
1963         scc->dev_stat.tx_fifo_errors = scc->stat.tx_under;
1964
1965         return &scc->dev_stat;
1966 }
1967
1968 /* ******************************************************************** */
1969 /* *            dump statistics to /proc/net/z8530drv                 * */
1970 /* ******************************************************************** */
1971
1972 #ifdef CONFIG_PROC_FS
1973
1974 static inline struct scc_channel *scc_net_seq_idx(loff_t pos)
1975 {
1976         int k;
1977
1978         for (k = 0; k < Nchips*2; ++k) {
1979                 if (!SCC_Info[k].init)
1980                         continue;
1981                 if (pos-- == 0)
1982                         return &SCC_Info[k];
1983         }
1984         return NULL;
1985 }
1986
1987 static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos)
1988 {
1989         return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN;
1990
1991 }
1992
1993 static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos)
1994 {
1995         unsigned k;
1996         struct scc_channel *scc = v;
1997         ++*pos;
1998
1999         for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1;
2000              k < Nchips*2; ++k) {
2001                 if (SCC_Info[k].init)
2002                         return &SCC_Info[k];
2003         }
2004         return NULL;
2005 }
2006
2007 static void scc_net_seq_stop(struct seq_file *seq, void *v)
2008 {
2009 }
2010
2011 static int scc_net_seq_show(struct seq_file *seq, void *v)
2012 {
2013         if (v == SEQ_START_TOKEN) {
2014                 seq_puts(seq, "z8530drv-"VERSION"\n");
2015         } else if (!Driver_Initialized) {
2016                 seq_puts(seq, "not initialized\n");
2017         } else if (!Nchips) {
2018                 seq_puts(seq, "chips missing\n");
2019         } else {
2020                 const struct scc_channel *scc = v;
2021                 const struct scc_stat *stat = &scc->stat;
2022                 const struct scc_kiss *kiss = &scc->kiss;
2023
2024
2025                 /* dev  data ctrl irq clock brand enh vector special option
2026                  *      baud nrz clocksrc softdcd bufsize
2027                  *      rxints txints exints spints
2028                  *      rcvd rxerrs over / xmit txerrs under / nospace bufsize
2029                  *      txd pers slot tail ful wait min maxk idl defr txof grp
2030                  *      W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
2031                  *      R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ##
2032                  */
2033
2034                 seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n",
2035                                 scc->dev->name,
2036                                 scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand,
2037                                 scc->enhanced, Vector_Latch, scc->special,
2038                                 scc->option);
2039                 seq_printf(seq, "\t%lu %d %d %d %d\n",
2040                                 scc->modem.speed, scc->modem.nrz,
2041                                 scc->modem.clocksrc, kiss->softdcd,
2042                                 stat->bufsize);
2043                 seq_printf(seq, "\t%lu %lu %lu %lu\n",
2044                                 stat->rxints, stat->txints, stat->exints, stat->spints);
2045                 seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n",
2046                                 stat->rxframes, stat->rxerrs, stat->rx_over,
2047                                 stat->txframes, stat->txerrs, stat->tx_under,
2048                                 stat->nospace,  stat->tx_state);
2049
2050 #define K(x) kiss->x
2051                 seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n",
2052                                 K(txdelay), K(persist), K(slottime), K(tailtime),
2053                                 K(fulldup), K(waittime), K(mintime), K(maxkeyup),
2054                                 K(idletime), K(maxdefer), K(tx_inhibit), K(group));
2055 #undef K
2056 #ifdef SCC_DEBUG
2057                 {
2058                         int reg;
2059
2060                 seq_printf(seq, "\tW ");
2061                         for (reg = 0; reg < 16; reg++)
2062                                 seq_printf(seq, "%2.2x ", scc->wreg[reg]);
2063                         seq_printf(seq, "\n");
2064
2065                 seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1));
2066                         for (reg = 3; reg < 8; reg++)
2067                                 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
2068                         seq_printf(seq, "XX ");
2069                         for (reg = 9; reg < 16; reg++)
2070                                 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
2071                         seq_printf(seq, "\n");
2072                 }
2073 #endif
2074                 seq_putc(seq, '\n');
2075         }
2076
2077         return 0;
2078 }
2079
2080 static const struct seq_operations scc_net_seq_ops = {
2081         .start  = scc_net_seq_start,
2082         .next   = scc_net_seq_next,
2083         .stop   = scc_net_seq_stop,
2084         .show   = scc_net_seq_show,
2085 };
2086
2087
2088 static int scc_net_seq_open(struct inode *inode, struct file *file)
2089 {
2090         return seq_open(file, &scc_net_seq_ops);
2091 }
2092
2093 static const struct file_operations scc_net_seq_fops = {
2094         .owner   = THIS_MODULE,
2095         .open    = scc_net_seq_open,
2096         .read    = seq_read,
2097         .llseek  = seq_lseek,
2098         .release = seq_release_private,
2099 };
2100
2101 #endif /* CONFIG_PROC_FS */
2102
2103
2104 /* ******************************************************************** */
2105 /* *                    Init SCC driver                               * */
2106 /* ******************************************************************** */
2107
2108 static int __init scc_init_driver (void)
2109 {
2110         char devname[IFNAMSIZ];
2111
2112         printk(banner);
2113
2114         sprintf(devname,"%s0", SCC_DriverName);
2115
2116         rtnl_lock();
2117         if (scc_net_alloc(devname, SCC_Info)) {
2118                 rtnl_unlock();
2119                 printk(KERN_ERR "z8530drv: cannot initialize module\n");
2120                 return -EIO;
2121         }
2122         rtnl_unlock();
2123
2124         proc_create("z8530drv", 0, init_net.proc_net, &scc_net_seq_fops);
2125
2126         return 0;
2127 }
2128
2129 static void __exit scc_cleanup_driver(void)
2130 {
2131         io_port ctrl;
2132         int k;
2133         struct scc_channel *scc;
2134         struct net_device *dev;
2135
2136         if (Nchips == 0 && (dev = SCC_Info[0].dev))
2137         {
2138                 unregister_netdev(dev);
2139                 free_netdev(dev);
2140         }
2141
2142         /* Guard against chip prattle */
2143         local_irq_disable();
2144
2145         for (k = 0; k < Nchips; k++)
2146                 if ( (ctrl = SCC_ctrl[k].chan_A) )
2147                 {
2148                         Outb(ctrl, 0);
2149                         OutReg(ctrl,R9,FHWRES); /* force hardware reset */
2150                         udelay(50);
2151                 }
2152
2153         /* To unload the port must be closed so no real IRQ pending */
2154         for (k = 0; k < nr_irqs ; k++)
2155                 if (Ivec[k].used) free_irq(k, NULL);
2156
2157         local_irq_enable();
2158
2159         /* Now clean up */
2160         for (k = 0; k < Nchips*2; k++)
2161         {
2162                 scc = &SCC_Info[k];
2163                 if (scc->ctrl)
2164                 {
2165                         release_region(scc->ctrl, 1);
2166                         release_region(scc->data, 1);
2167                 }
2168                 if (scc->dev)
2169                 {
2170                         unregister_netdev(scc->dev);
2171                         free_netdev(scc->dev);
2172                 }
2173         }
2174
2175
2176         if (Vector_Latch)
2177                 release_region(Vector_Latch, 1);
2178
2179         remove_proc_entry("z8530drv", init_net.proc_net);
2180 }
2181
2182 MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>");
2183 MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards");
2184 MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio");
2185 MODULE_LICENSE("GPL");
2186 module_init(scc_init_driver);
2187 module_exit(scc_cleanup_driver);