Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / fddi / skfp / h / smtstate.h
1 /******************************************************************************
2  *
3  *      (C)Copyright 1998,1999 SysKonnect,
4  *      a business unit of Schneider & Koch & Co. Datensysteme GmbH.
5  *
6  *      This program is free software; you can redistribute it and/or modify
7  *      it under the terms of the GNU General Public License as published by
8  *      the Free Software Foundation; either version 2 of the License, or
9  *      (at your option) any later version.
10  *
11  *      The information in this file is provided "AS IS" without warranty.
12  *
13  ******************************************************************************/
14
15 #ifndef _SKFP_H_SMTSTATE_H_
16 #define _SKFP_H_SMTSTATE_H_
17
18 /*
19  *      SMT state definitions
20  */
21
22 #ifndef KERNEL
23 /*
24  * PCM states
25  */
26 #define PC0_OFF                 0
27 #define PC1_BREAK               1
28 #define PC2_TRACE               2
29 #define PC3_CONNECT             3
30 #define PC4_NEXT                4
31 #define PC5_SIGNAL              5
32 #define PC6_JOIN                6
33 #define PC7_VERIFY              7
34 #define PC8_ACTIVE              8
35 #define PC9_MAINT               9
36
37 /*
38  * PCM modes
39  */
40 #define PM_NONE                 0
41 #define PM_PEER                 1
42 #define PM_TREE                 2
43
44 /*
45  * PCM type
46  */
47 #define TA                      0
48 #define TB                      1
49 #define TS                      2
50 #define TM                      3
51 #define TNONE                   4
52
53 /*
54  * CFM states
55  */
56 #define SC0_ISOLATED    0               /* isolated */
57 #define SC1_WRAP_A      5               /* wrap A */
58 #define SC2_WRAP_B      6               /* wrap B */
59 #define SC4_THRU_A      12              /* through A */
60 #define SC5_THRU_B      7               /* through B (SMt 6.2) */
61 #define SC7_WRAP_S      8               /* SAS */
62
63 /*
64  * ECM states
65  */
66 #define EC0_OUT         0
67 #define EC1_IN          1
68 #define EC2_TRACE       2
69 #define EC3_LEAVE       3
70 #define EC4_PATH_TEST   4
71 #define EC5_INSERT      5
72 #define EC6_CHECK       6
73 #define EC7_DEINSERT    7
74
75 /*
76  * RMT states
77  */
78 #define RM0_ISOLATED    0
79 #define RM1_NON_OP      1               /* not operational */
80 #define RM2_RING_OP     2               /* ring operational */
81 #define RM3_DETECT      3               /* detect dupl addresses */
82 #define RM4_NON_OP_DUP  4               /* dupl. addr detected */
83 #define RM5_RING_OP_DUP 5               /* ring oper. with dupl. addr */
84 #define RM6_DIRECTED    6               /* sending directed beacons */
85 #define RM7_TRACE       7               /* trace initiated */
86 #endif
87
88 struct pcm_state {
89         unsigned char   pcm_type ;              /* TA TB TS TM */
90         unsigned char   pcm_state ;             /* state PC[0-9]_* */
91         unsigned char   pcm_mode ;              /* PM_{NONE,PEER,TREE} */
92         unsigned char   pcm_neighbor ;          /* TA TB TS TM */
93         unsigned char   pcm_bsf ;               /* flag bs : TRUE/FALSE */
94         unsigned char   pcm_lsf ;               /* flag ls : TRUE/FALSE */
95         unsigned char   pcm_lct_fail ;          /* counter lct_fail */
96         unsigned char   pcm_ls_rx ;             /* rx line state */
97         short           pcm_r_val ;             /* signaling bits */
98         short           pcm_t_val ;             /* signaling bits */
99 } ;
100
101 struct smt_state {
102         struct pcm_state pcm_state[NUMPHYS] ;   /* port A & port B */
103 } ;
104
105 #endif
106