Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / ethernet / samsung / sxgbe / sxgbe_core.c
1 /* 10G controller driver for Samsung SoCs
2  *
3  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
4  *              http://www.samsung.com
5  *
6  * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12
13 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
14
15 #include <linux/export.h>
16 #include <linux/io.h>
17 #include <linux/netdevice.h>
18 #include <linux/phy.h>
19
20 #include "sxgbe_common.h"
21 #include "sxgbe_reg.h"
22
23 /* MAC core initialization */
24 static void sxgbe_core_init(void __iomem *ioaddr)
25 {
26         u32 regval;
27
28         /* TX configuration */
29         regval = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
30         /* Other configurable parameters IFP, IPG, ISR, ISM
31          * needs to be set if needed
32          */
33         regval |= SXGBE_TX_JABBER_DISABLE;
34         writel(regval, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
35
36         /* RX configuration */
37         regval = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
38         /* Other configurable parameters CST, SPEN, USP, GPSLCE
39          * WD, LM, S2KP, HDSMS, GPSL, ELEN, ARPEN needs to be
40          * set if needed
41          */
42         regval |= SXGBE_RX_JUMBPKT_ENABLE | SXGBE_RX_ACS_ENABLE;
43         writel(regval, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
44 }
45
46 /* Dump MAC registers */
47 static void sxgbe_core_dump_regs(void __iomem *ioaddr)
48 {
49 }
50
51 static int sxgbe_get_lpi_status(void __iomem *ioaddr, const u32 irq_status)
52 {
53         int status = 0;
54         int lpi_status;
55
56         /* Reading this register shall clear all the LPI status bits */
57         lpi_status = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
58
59         if (lpi_status & LPI_CTRL_STATUS_TLPIEN)
60                 status |= TX_ENTRY_LPI_MODE;
61         if (lpi_status & LPI_CTRL_STATUS_TLPIEX)
62                 status |= TX_EXIT_LPI_MODE;
63         if (lpi_status & LPI_CTRL_STATUS_RLPIEN)
64                 status |= RX_ENTRY_LPI_MODE;
65         if (lpi_status & LPI_CTRL_STATUS_RLPIEX)
66                 status |= RX_EXIT_LPI_MODE;
67
68         return status;
69 }
70
71 /* Handle extra events on specific interrupts hw dependent */
72 static int sxgbe_core_host_irq_status(void __iomem *ioaddr,
73                                       struct sxgbe_extra_stats *x)
74 {
75         int irq_status, status = 0;
76
77         irq_status = readl(ioaddr + SXGBE_CORE_INT_STATUS_REG);
78
79         if (unlikely(irq_status & LPI_INT_STATUS))
80                 status |= sxgbe_get_lpi_status(ioaddr, irq_status);
81
82         return status;
83 }
84
85 /* Set power management mode (e.g. magic frame) */
86 static void sxgbe_core_pmt(void __iomem *ioaddr, unsigned long mode)
87 {
88 }
89
90 /* Set/Get Unicast MAC addresses */
91 static void sxgbe_core_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
92                                      unsigned int reg_n)
93 {
94         u32 high_word, low_word;
95
96         high_word = (addr[5] << 8) | (addr[4]);
97         low_word = (addr[3] << 24) | (addr[2] << 16) |
98                    (addr[1] << 8) | (addr[0]);
99         writel(high_word, ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n));
100         writel(low_word, ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n));
101 }
102
103 static void sxgbe_core_get_umac_addr(void __iomem *ioaddr, unsigned char *addr,
104                                      unsigned int reg_n)
105 {
106         u32 high_word, low_word;
107
108         high_word = readl(ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n));
109         low_word = readl(ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n));
110
111         /* extract and assign address */
112         addr[5] = (high_word & 0x0000FF00) >> 8;
113         addr[4] = (high_word & 0x000000FF);
114         addr[3] = (low_word & 0xFF000000) >> 24;
115         addr[2] = (low_word & 0x00FF0000) >> 16;
116         addr[1] = (low_word & 0x0000FF00) >> 8;
117         addr[0] = (low_word & 0x000000FF);
118 }
119
120 static void sxgbe_enable_tx(void __iomem *ioaddr, bool enable)
121 {
122         u32 tx_config;
123
124         tx_config = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
125         tx_config &= ~SXGBE_TX_ENABLE;
126
127         if (enable)
128                 tx_config |= SXGBE_TX_ENABLE;
129         writel(tx_config, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
130 }
131
132 static void sxgbe_enable_rx(void __iomem *ioaddr, bool enable)
133 {
134         u32 rx_config;
135
136         rx_config = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
137         rx_config &= ~SXGBE_RX_ENABLE;
138
139         if (enable)
140                 rx_config |= SXGBE_RX_ENABLE;
141         writel(rx_config, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
142 }
143
144 static int sxgbe_get_controller_version(void __iomem *ioaddr)
145 {
146         return readl(ioaddr + SXGBE_CORE_VERSION_REG);
147 }
148
149 /* If supported then get the optional core features */
150 static unsigned int sxgbe_get_hw_feature(void __iomem *ioaddr,
151                                          unsigned char feature_index)
152 {
153         return readl(ioaddr + (SXGBE_CORE_HW_FEA_REG(feature_index)));
154 }
155
156 static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed)
157 {
158         u32 tx_cfg = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
159
160         /* clear the speed bits */
161         tx_cfg &= ~0x60000000;
162         tx_cfg |= (speed << SXGBE_SPEED_LSHIFT);
163
164         /* set the speed */
165         writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
166 }
167
168 static void sxgbe_core_enable_rxqueue(void __iomem *ioaddr, int queue_num)
169 {
170         u32 reg_val;
171
172         reg_val = readl(ioaddr + SXGBE_CORE_RX_CTL0_REG);
173         reg_val &= ~(SXGBE_CORE_RXQ_ENABLE_MASK << queue_num);
174         reg_val |= SXGBE_CORE_RXQ_ENABLE;
175         writel(reg_val, ioaddr + SXGBE_CORE_RX_CTL0_REG);
176 }
177
178 static void sxgbe_core_disable_rxqueue(void __iomem *ioaddr, int queue_num)
179 {
180         u32 reg_val;
181
182         reg_val = readl(ioaddr + SXGBE_CORE_RX_CTL0_REG);
183         reg_val &= ~(SXGBE_CORE_RXQ_ENABLE_MASK << queue_num);
184         reg_val |= SXGBE_CORE_RXQ_DISABLE;
185         writel(reg_val, ioaddr + SXGBE_CORE_RX_CTL0_REG);
186 }
187
188 static void  sxgbe_set_eee_mode(void __iomem *ioaddr)
189 {
190         u32 ctrl;
191
192         /* Enable the LPI mode for transmit path with Tx automate bit set.
193          * When Tx Automate bit is set, MAC internally handles the entry
194          * to LPI mode after all outstanding and pending packets are
195          * transmitted.
196          */
197         ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
198         ctrl |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA;
199         writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
200 }
201
202 static void  sxgbe_reset_eee_mode(void __iomem *ioaddr)
203 {
204         u32 ctrl;
205
206         ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
207         ctrl &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA);
208         writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
209 }
210
211 static void  sxgbe_set_eee_pls(void __iomem *ioaddr, const int link)
212 {
213         u32 ctrl;
214
215         ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
216
217         /* If the PHY link status is UP then set PLS */
218         if (link)
219                 ctrl |= LPI_CTRL_STATUS_PLS;
220         else
221                 ctrl &= ~LPI_CTRL_STATUS_PLS;
222
223         writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
224 }
225
226 static void  sxgbe_set_eee_timer(void __iomem *ioaddr,
227                                  const int ls, const int tw)
228 {
229         int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16);
230
231         /* Program the timers in the LPI timer control register:
232          * LS: minimum time (ms) for which the link
233          *  status from PHY should be ok before transmitting
234          *  the LPI pattern.
235          * TW: minimum time (us) for which the core waits
236          *  after it has stopped transmitting the LPI pattern.
237          */
238         writel(value, ioaddr + SXGBE_CORE_LPI_TIMER_CTRL);
239 }
240
241 static void sxgbe_enable_rx_csum(void __iomem *ioaddr)
242 {
243         u32 ctrl;
244
245         ctrl = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
246         ctrl |= SXGBE_RX_CSUMOFFLOAD_ENABLE;
247         writel(ctrl, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
248 }
249
250 static void sxgbe_disable_rx_csum(void __iomem *ioaddr)
251 {
252         u32 ctrl;
253
254         ctrl = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
255         ctrl &= ~SXGBE_RX_CSUMOFFLOAD_ENABLE;
256         writel(ctrl, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
257 }
258
259 static const struct sxgbe_core_ops core_ops = {
260         .core_init              = sxgbe_core_init,
261         .dump_regs              = sxgbe_core_dump_regs,
262         .host_irq_status        = sxgbe_core_host_irq_status,
263         .pmt                    = sxgbe_core_pmt,
264         .set_umac_addr          = sxgbe_core_set_umac_addr,
265         .get_umac_addr          = sxgbe_core_get_umac_addr,
266         .enable_rx              = sxgbe_enable_rx,
267         .enable_tx              = sxgbe_enable_tx,
268         .get_controller_version = sxgbe_get_controller_version,
269         .get_hw_feature         = sxgbe_get_hw_feature,
270         .set_speed              = sxgbe_core_set_speed,
271         .set_eee_mode           = sxgbe_set_eee_mode,
272         .reset_eee_mode         = sxgbe_reset_eee_mode,
273         .set_eee_timer          = sxgbe_set_eee_timer,
274         .set_eee_pls            = sxgbe_set_eee_pls,
275         .enable_rx_csum         = sxgbe_enable_rx_csum,
276         .disable_rx_csum        = sxgbe_disable_rx_csum,
277         .enable_rxqueue         = sxgbe_core_enable_rxqueue,
278         .disable_rxqueue        = sxgbe_core_disable_rxqueue,
279 };
280
281 const struct sxgbe_core_ops *sxgbe_get_core_ops(void)
282 {
283         return &core_ops;
284 }