Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / ethernet / neterion / vxge / vxge-main.c
1 /******************************************************************************
2 * This software may be used and distributed according to the terms of
3 * the GNU General Public License (GPL), incorporated herein by reference.
4 * Drivers based on or derived from this code fall under the GPL and must
5 * retain the authorship, copyright and license notice.  This file is not
6 * a complete program and may only be used when the entire operating
7 * system is licensed under the GPL.
8 * See the file COPYING in this distribution for more information.
9 *
10 * vxge-main.c: Driver for Exar Corp's X3100 Series 10GbE PCIe I/O
11 *              Virtualized Server Adapter.
12 * Copyright(c) 2002-2010 Exar Corp.
13 *
14 * The module loadable parameters that are supported by the driver and a brief
15 * explanation of all the variables:
16 * vlan_tag_strip:
17 *       Strip VLAN Tag enable/disable. Instructs the device to remove
18 *       the VLAN tag from all received tagged frames that are not
19 *       replicated at the internal L2 switch.
20 *               0 - Do not strip the VLAN tag.
21 *               1 - Strip the VLAN tag.
22 *
23 * addr_learn_en:
24 *       Enable learning the mac address of the guest OS interface in
25 *       a virtualization environment.
26 *               0 - DISABLE
27 *               1 - ENABLE
28 *
29 * max_config_port:
30 *       Maximum number of port to be supported.
31 *               MIN -1 and MAX - 2
32 *
33 * max_config_vpath:
34 *       This configures the maximum no of VPATH configures for each
35 *       device function.
36 *               MIN - 1 and MAX - 17
37 *
38 * max_config_dev:
39 *       This configures maximum no of Device function to be enabled.
40 *               MIN - 1 and MAX - 17
41 *
42 ******************************************************************************/
43
44 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
45
46 #include <linux/bitops.h>
47 #include <linux/if_vlan.h>
48 #include <linux/interrupt.h>
49 #include <linux/pci.h>
50 #include <linux/slab.h>
51 #include <linux/tcp.h>
52 #include <net/ip.h>
53 #include <linux/netdevice.h>
54 #include <linux/etherdevice.h>
55 #include <linux/firmware.h>
56 #include <linux/net_tstamp.h>
57 #include <linux/prefetch.h>
58 #include <linux/module.h>
59 #include "vxge-main.h"
60 #include "vxge-reg.h"
61
62 MODULE_LICENSE("Dual BSD/GPL");
63 MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O"
64         "Virtualized Server Adapter");
65
66 static const struct pci_device_id vxge_id_table[] = {
67         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID,
68         PCI_ANY_ID},
69         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID,
70         PCI_ANY_ID},
71         {0}
72 };
73
74 MODULE_DEVICE_TABLE(pci, vxge_id_table);
75
76 VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE);
77 VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT);
78 VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT);
79 VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT);
80 VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT);
81 VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV);
82
83 static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] =
84                 {0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31};
85 static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] =
86         {[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF};
87 module_param_array(bw_percentage, uint, NULL, 0);
88
89 static struct vxge_drv_config *driver_config;
90 static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev);
91
92 static inline int is_vxge_card_up(struct vxgedev *vdev)
93 {
94         return test_bit(__VXGE_STATE_CARD_UP, &vdev->state);
95 }
96
97 static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo)
98 {
99         struct sk_buff **skb_ptr = NULL;
100         struct sk_buff **temp;
101 #define NR_SKB_COMPLETED 128
102         struct sk_buff *completed[NR_SKB_COMPLETED];
103         int more;
104
105         do {
106                 more = 0;
107                 skb_ptr = completed;
108
109                 if (__netif_tx_trylock(fifo->txq)) {
110                         vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr,
111                                                 NR_SKB_COMPLETED, &more);
112                         __netif_tx_unlock(fifo->txq);
113                 }
114
115                 /* free SKBs */
116                 for (temp = completed; temp != skb_ptr; temp++)
117                         dev_kfree_skb_irq(*temp);
118         } while (more);
119 }
120
121 static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev)
122 {
123         int i;
124
125         /* Complete all transmits */
126         for (i = 0; i < vdev->no_of_vpath; i++)
127                 VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo);
128 }
129
130 static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev)
131 {
132         int i;
133         struct vxge_ring *ring;
134
135         /* Complete all receives*/
136         for (i = 0; i < vdev->no_of_vpath; i++) {
137                 ring = &vdev->vpaths[i].ring;
138                 vxge_hw_vpath_poll_rx(ring->handle);
139         }
140 }
141
142 /*
143  * vxge_callback_link_up
144  *
145  * This function is called during interrupt context to notify link up state
146  * change.
147  */
148 static void vxge_callback_link_up(struct __vxge_hw_device *hldev)
149 {
150         struct net_device *dev = hldev->ndev;
151         struct vxgedev *vdev = netdev_priv(dev);
152
153         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
154                 vdev->ndev->name, __func__, __LINE__);
155         netdev_notice(vdev->ndev, "Link Up\n");
156         vdev->stats.link_up++;
157
158         netif_carrier_on(vdev->ndev);
159         netif_tx_wake_all_queues(vdev->ndev);
160
161         vxge_debug_entryexit(VXGE_TRACE,
162                 "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__);
163 }
164
165 /*
166  * vxge_callback_link_down
167  *
168  * This function is called during interrupt context to notify link down state
169  * change.
170  */
171 static void vxge_callback_link_down(struct __vxge_hw_device *hldev)
172 {
173         struct net_device *dev = hldev->ndev;
174         struct vxgedev *vdev = netdev_priv(dev);
175
176         vxge_debug_entryexit(VXGE_TRACE,
177                 "%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
178         netdev_notice(vdev->ndev, "Link Down\n");
179
180         vdev->stats.link_down++;
181         netif_carrier_off(vdev->ndev);
182         netif_tx_stop_all_queues(vdev->ndev);
183
184         vxge_debug_entryexit(VXGE_TRACE,
185                 "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__);
186 }
187
188 /*
189  * vxge_rx_alloc
190  *
191  * Allocate SKB.
192  */
193 static struct sk_buff *
194 vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size)
195 {
196         struct net_device    *dev;
197         struct sk_buff       *skb;
198         struct vxge_rx_priv *rx_priv;
199
200         dev = ring->ndev;
201         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
202                 ring->ndev->name, __func__, __LINE__);
203
204         rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
205
206         /* try to allocate skb first. this one may fail */
207         skb = netdev_alloc_skb(dev, skb_size +
208         VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
209         if (skb == NULL) {
210                 vxge_debug_mem(VXGE_ERR,
211                         "%s: out of memory to allocate SKB", dev->name);
212                 ring->stats.skb_alloc_fail++;
213                 return NULL;
214         }
215
216         vxge_debug_mem(VXGE_TRACE,
217                 "%s: %s:%d  Skb : 0x%p", ring->ndev->name,
218                 __func__, __LINE__, skb);
219
220         skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
221
222         rx_priv->skb = skb;
223         rx_priv->skb_data = NULL;
224         rx_priv->data_size = skb_size;
225         vxge_debug_entryexit(VXGE_TRACE,
226                 "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
227
228         return skb;
229 }
230
231 /*
232  * vxge_rx_map
233  */
234 static int vxge_rx_map(void *dtrh, struct vxge_ring *ring)
235 {
236         struct vxge_rx_priv *rx_priv;
237         dma_addr_t dma_addr;
238
239         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
240                 ring->ndev->name, __func__, __LINE__);
241         rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
242
243         rx_priv->skb_data = rx_priv->skb->data;
244         dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data,
245                                 rx_priv->data_size, PCI_DMA_FROMDEVICE);
246
247         if (unlikely(pci_dma_mapping_error(ring->pdev, dma_addr))) {
248                 ring->stats.pci_map_fail++;
249                 return -EIO;
250         }
251         vxge_debug_mem(VXGE_TRACE,
252                 "%s: %s:%d  1 buffer mode dma_addr = 0x%llx",
253                 ring->ndev->name, __func__, __LINE__,
254                 (unsigned long long)dma_addr);
255         vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size);
256
257         rx_priv->data_dma = dma_addr;
258         vxge_debug_entryexit(VXGE_TRACE,
259                 "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
260
261         return 0;
262 }
263
264 /*
265  * vxge_rx_initial_replenish
266  * Allocation of RxD as an initial replenish procedure.
267  */
268 static enum vxge_hw_status
269 vxge_rx_initial_replenish(void *dtrh, void *userdata)
270 {
271         struct vxge_ring *ring = (struct vxge_ring *)userdata;
272         struct vxge_rx_priv *rx_priv;
273
274         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
275                 ring->ndev->name, __func__, __LINE__);
276         if (vxge_rx_alloc(dtrh, ring,
277                           VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL)
278                 return VXGE_HW_FAIL;
279
280         if (vxge_rx_map(dtrh, ring)) {
281                 rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
282                 dev_kfree_skb(rx_priv->skb);
283
284                 return VXGE_HW_FAIL;
285         }
286         vxge_debug_entryexit(VXGE_TRACE,
287                 "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
288
289         return VXGE_HW_OK;
290 }
291
292 static inline void
293 vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan,
294                  int pkt_length, struct vxge_hw_ring_rxd_info *ext_info)
295 {
296
297         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
298                         ring->ndev->name, __func__, __LINE__);
299         skb_record_rx_queue(skb, ring->driver_id);
300         skb->protocol = eth_type_trans(skb, ring->ndev);
301
302         u64_stats_update_begin(&ring->stats.syncp);
303         ring->stats.rx_frms++;
304         ring->stats.rx_bytes += pkt_length;
305
306         if (skb->pkt_type == PACKET_MULTICAST)
307                 ring->stats.rx_mcast++;
308         u64_stats_update_end(&ring->stats.syncp);
309
310         vxge_debug_rx(VXGE_TRACE,
311                 "%s: %s:%d  skb protocol = %d",
312                 ring->ndev->name, __func__, __LINE__, skb->protocol);
313
314         if (ext_info->vlan &&
315             ring->vlan_tag_strip == VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)
316                 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ext_info->vlan);
317         napi_gro_receive(ring->napi_p, skb);
318
319         vxge_debug_entryexit(VXGE_TRACE,
320                 "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
321 }
322
323 static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring,
324                                     struct vxge_rx_priv *rx_priv)
325 {
326         pci_dma_sync_single_for_device(ring->pdev,
327                 rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE);
328
329         vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size);
330         vxge_hw_ring_rxd_pre_post(ring->handle, dtr);
331 }
332
333 static inline void vxge_post(int *dtr_cnt, void **first_dtr,
334                              void *post_dtr, struct __vxge_hw_ring *ringh)
335 {
336         int dtr_count = *dtr_cnt;
337         if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) {
338                 if (*first_dtr)
339                         vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr);
340                 *first_dtr = post_dtr;
341         } else
342                 vxge_hw_ring_rxd_post_post(ringh, post_dtr);
343         dtr_count++;
344         *dtr_cnt = dtr_count;
345 }
346
347 /*
348  * vxge_rx_1b_compl
349  *
350  * If the interrupt is because of a received frame or if the receive ring
351  * contains fresh as yet un-processed frames, this function is called.
352  */
353 static enum vxge_hw_status
354 vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr,
355                  u8 t_code, void *userdata)
356 {
357         struct vxge_ring *ring = (struct vxge_ring *)userdata;
358         struct net_device *dev = ring->ndev;
359         unsigned int dma_sizes;
360         void *first_dtr = NULL;
361         int dtr_cnt = 0;
362         int data_size;
363         dma_addr_t data_dma;
364         int pkt_length;
365         struct sk_buff *skb;
366         struct vxge_rx_priv *rx_priv;
367         struct vxge_hw_ring_rxd_info ext_info;
368         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
369                 ring->ndev->name, __func__, __LINE__);
370
371         if (ring->budget <= 0)
372                 goto out;
373
374         do {
375                 prefetch((char *)dtr + L1_CACHE_BYTES);
376                 rx_priv = vxge_hw_ring_rxd_private_get(dtr);
377                 skb = rx_priv->skb;
378                 data_size = rx_priv->data_size;
379                 data_dma = rx_priv->data_dma;
380                 prefetch(rx_priv->skb_data);
381
382                 vxge_debug_rx(VXGE_TRACE,
383                         "%s: %s:%d  skb = 0x%p",
384                         ring->ndev->name, __func__, __LINE__, skb);
385
386                 vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes);
387                 pkt_length = dma_sizes;
388
389                 pkt_length -= ETH_FCS_LEN;
390
391                 vxge_debug_rx(VXGE_TRACE,
392                         "%s: %s:%d  Packet Length = %d",
393                         ring->ndev->name, __func__, __LINE__, pkt_length);
394
395                 vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info);
396
397                 /* check skb validity */
398                 vxge_assert(skb);
399
400                 prefetch((char *)skb + L1_CACHE_BYTES);
401                 if (unlikely(t_code)) {
402                         if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) !=
403                                 VXGE_HW_OK) {
404
405                                 ring->stats.rx_errors++;
406                                 vxge_debug_rx(VXGE_TRACE,
407                                         "%s: %s :%d Rx T_code is %d",
408                                         ring->ndev->name, __func__,
409                                         __LINE__, t_code);
410
411                                 /* If the t_code is not supported and if the
412                                  * t_code is other than 0x5 (unparseable packet
413                                  * such as unknown UPV6 header), Drop it !!!
414                                  */
415                                 vxge_re_pre_post(dtr, ring, rx_priv);
416
417                                 vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
418                                 ring->stats.rx_dropped++;
419                                 continue;
420                         }
421                 }
422
423                 if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) {
424                         if (vxge_rx_alloc(dtr, ring, data_size) != NULL) {
425                                 if (!vxge_rx_map(dtr, ring)) {
426                                         skb_put(skb, pkt_length);
427
428                                         pci_unmap_single(ring->pdev, data_dma,
429                                                 data_size, PCI_DMA_FROMDEVICE);
430
431                                         vxge_hw_ring_rxd_pre_post(ringh, dtr);
432                                         vxge_post(&dtr_cnt, &first_dtr, dtr,
433                                                 ringh);
434                                 } else {
435                                         dev_kfree_skb(rx_priv->skb);
436                                         rx_priv->skb = skb;
437                                         rx_priv->data_size = data_size;
438                                         vxge_re_pre_post(dtr, ring, rx_priv);
439
440                                         vxge_post(&dtr_cnt, &first_dtr, dtr,
441                                                 ringh);
442                                         ring->stats.rx_dropped++;
443                                         break;
444                                 }
445                         } else {
446                                 vxge_re_pre_post(dtr, ring, rx_priv);
447
448                                 vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
449                                 ring->stats.rx_dropped++;
450                                 break;
451                         }
452                 } else {
453                         struct sk_buff *skb_up;
454
455                         skb_up = netdev_alloc_skb(dev, pkt_length +
456                                 VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
457                         if (skb_up != NULL) {
458                                 skb_reserve(skb_up,
459                                     VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
460
461                                 pci_dma_sync_single_for_cpu(ring->pdev,
462                                         data_dma, data_size,
463                                         PCI_DMA_FROMDEVICE);
464
465                                 vxge_debug_mem(VXGE_TRACE,
466                                         "%s: %s:%d  skb_up = %p",
467                                         ring->ndev->name, __func__,
468                                         __LINE__, skb);
469                                 memcpy(skb_up->data, skb->data, pkt_length);
470
471                                 vxge_re_pre_post(dtr, ring, rx_priv);
472
473                                 vxge_post(&dtr_cnt, &first_dtr, dtr,
474                                         ringh);
475                                 /* will netif_rx small SKB instead */
476                                 skb = skb_up;
477                                 skb_put(skb, pkt_length);
478                         } else {
479                                 vxge_re_pre_post(dtr, ring, rx_priv);
480
481                                 vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
482                                 vxge_debug_rx(VXGE_ERR,
483                                         "%s: vxge_rx_1b_compl: out of "
484                                         "memory", dev->name);
485                                 ring->stats.skb_alloc_fail++;
486                                 break;
487                         }
488                 }
489
490                 if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) &&
491                     !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) &&
492                     (dev->features & NETIF_F_RXCSUM) && /* Offload Rx side CSUM */
493                     ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK &&
494                     ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK)
495                         skb->ip_summed = CHECKSUM_UNNECESSARY;
496                 else
497                         skb_checksum_none_assert(skb);
498
499
500                 if (ring->rx_hwts) {
501                         struct skb_shared_hwtstamps *skb_hwts;
502                         u32 ns = *(u32 *)(skb->head + pkt_length);
503
504                         skb_hwts = skb_hwtstamps(skb);
505                         skb_hwts->hwtstamp = ns_to_ktime(ns);
506                 }
507
508                 /* rth_hash_type and rth_it_hit are non-zero regardless of
509                  * whether rss is enabled.  Only the rth_value is zero/non-zero
510                  * if rss is disabled/enabled, so key off of that.
511                  */
512                 if (ext_info.rth_value)
513                         skb_set_hash(skb, ext_info.rth_value,
514                                      PKT_HASH_TYPE_L3);
515
516                 vxge_rx_complete(ring, skb, ext_info.vlan,
517                         pkt_length, &ext_info);
518
519                 ring->budget--;
520                 ring->pkts_processed++;
521                 if (!ring->budget)
522                         break;
523
524         } while (vxge_hw_ring_rxd_next_completed(ringh, &dtr,
525                 &t_code) == VXGE_HW_OK);
526
527         if (first_dtr)
528                 vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr);
529
530 out:
531         vxge_debug_entryexit(VXGE_TRACE,
532                                 "%s:%d  Exiting...",
533                                 __func__, __LINE__);
534         return VXGE_HW_OK;
535 }
536
537 /*
538  * vxge_xmit_compl
539  *
540  * If an interrupt was raised to indicate DMA complete of the Tx packet,
541  * this function is called. It identifies the last TxD whose buffer was
542  * freed and frees all skbs whose data have already DMA'ed into the NICs
543  * internal memory.
544  */
545 static enum vxge_hw_status
546 vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr,
547                 enum vxge_hw_fifo_tcode t_code, void *userdata,
548                 struct sk_buff ***skb_ptr, int nr_skb, int *more)
549 {
550         struct vxge_fifo *fifo = (struct vxge_fifo *)userdata;
551         struct sk_buff *skb, **done_skb = *skb_ptr;
552         int pkt_cnt = 0;
553
554         vxge_debug_entryexit(VXGE_TRACE,
555                 "%s:%d Entered....", __func__, __LINE__);
556
557         do {
558                 int frg_cnt;
559                 skb_frag_t *frag;
560                 int i = 0, j;
561                 struct vxge_tx_priv *txd_priv =
562                         vxge_hw_fifo_txdl_private_get(dtr);
563
564                 skb = txd_priv->skb;
565                 frg_cnt = skb_shinfo(skb)->nr_frags;
566                 frag = &skb_shinfo(skb)->frags[0];
567
568                 vxge_debug_tx(VXGE_TRACE,
569                                 "%s: %s:%d fifo_hw = %p dtr = %p "
570                                 "tcode = 0x%x", fifo->ndev->name, __func__,
571                                 __LINE__, fifo_hw, dtr, t_code);
572                 /* check skb validity */
573                 vxge_assert(skb);
574                 vxge_debug_tx(VXGE_TRACE,
575                         "%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d",
576                         fifo->ndev->name, __func__, __LINE__,
577                         skb, txd_priv, frg_cnt);
578                 if (unlikely(t_code)) {
579                         fifo->stats.tx_errors++;
580                         vxge_debug_tx(VXGE_ERR,
581                                 "%s: tx: dtr %p completed due to "
582                                 "error t_code %01x", fifo->ndev->name,
583                                 dtr, t_code);
584                         vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code);
585                 }
586
587                 /*  for unfragmented skb */
588                 pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++],
589                                 skb_headlen(skb), PCI_DMA_TODEVICE);
590
591                 for (j = 0; j < frg_cnt; j++) {
592                         pci_unmap_page(fifo->pdev,
593                                         txd_priv->dma_buffers[i++],
594                                         skb_frag_size(frag), PCI_DMA_TODEVICE);
595                         frag += 1;
596                 }
597
598                 vxge_hw_fifo_txdl_free(fifo_hw, dtr);
599
600                 /* Updating the statistics block */
601                 u64_stats_update_begin(&fifo->stats.syncp);
602                 fifo->stats.tx_frms++;
603                 fifo->stats.tx_bytes += skb->len;
604                 u64_stats_update_end(&fifo->stats.syncp);
605
606                 *done_skb++ = skb;
607
608                 if (--nr_skb <= 0) {
609                         *more = 1;
610                         break;
611                 }
612
613                 pkt_cnt++;
614                 if (pkt_cnt > fifo->indicate_max_pkts)
615                         break;
616
617         } while (vxge_hw_fifo_txdl_next_completed(fifo_hw,
618                                 &dtr, &t_code) == VXGE_HW_OK);
619
620         *skb_ptr = done_skb;
621         if (netif_tx_queue_stopped(fifo->txq))
622                 netif_tx_wake_queue(fifo->txq);
623
624         vxge_debug_entryexit(VXGE_TRACE,
625                                 "%s: %s:%d  Exiting...",
626                                 fifo->ndev->name, __func__, __LINE__);
627         return VXGE_HW_OK;
628 }
629
630 /* select a vpath to transmit the packet */
631 static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb)
632 {
633         u16 queue_len, counter = 0;
634         if (skb->protocol == htons(ETH_P_IP)) {
635                 struct iphdr *ip;
636                 struct tcphdr *th;
637
638                 ip = ip_hdr(skb);
639
640                 if (!ip_is_fragment(ip)) {
641                         th = (struct tcphdr *)(((unsigned char *)ip) +
642                                         ip->ihl*4);
643
644                         queue_len = vdev->no_of_vpath;
645                         counter = (ntohs(th->source) +
646                                 ntohs(th->dest)) &
647                                 vdev->vpath_selector[queue_len - 1];
648                         if (counter >= queue_len)
649                                 counter = queue_len - 1;
650                 }
651         }
652         return counter;
653 }
654
655 static enum vxge_hw_status vxge_search_mac_addr_in_list(
656         struct vxge_vpath *vpath, u64 del_mac)
657 {
658         struct list_head *entry, *next;
659         list_for_each_safe(entry, next, &vpath->mac_addr_list) {
660                 if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac)
661                         return TRUE;
662         }
663         return FALSE;
664 }
665
666 static int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac)
667 {
668         struct vxge_mac_addrs *new_mac_entry;
669         u8 *mac_address = NULL;
670
671         if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT)
672                 return TRUE;
673
674         new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC);
675         if (!new_mac_entry) {
676                 vxge_debug_mem(VXGE_ERR,
677                         "%s: memory allocation failed",
678                         VXGE_DRIVER_NAME);
679                 return FALSE;
680         }
681
682         list_add(&new_mac_entry->item, &vpath->mac_addr_list);
683
684         /* Copy the new mac address to the list */
685         mac_address = (u8 *)&new_mac_entry->macaddr;
686         memcpy(mac_address, mac->macaddr, ETH_ALEN);
687
688         new_mac_entry->state = mac->state;
689         vpath->mac_addr_cnt++;
690
691         if (is_multicast_ether_addr(mac->macaddr))
692                 vpath->mcast_addr_cnt++;
693
694         return TRUE;
695 }
696
697 /* Add a mac address to DA table */
698 static enum vxge_hw_status
699 vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac)
700 {
701         enum vxge_hw_status status = VXGE_HW_OK;
702         struct vxge_vpath *vpath;
703         enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode;
704
705         if (is_multicast_ether_addr(mac->macaddr))
706                 duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE;
707         else
708                 duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE;
709
710         vpath = &vdev->vpaths[mac->vpath_no];
711         status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr,
712                                                 mac->macmask, duplicate_mode);
713         if (status != VXGE_HW_OK) {
714                 vxge_debug_init(VXGE_ERR,
715                         "DA config add entry failed for vpath:%d",
716                         vpath->device_id);
717         } else
718                 if (FALSE == vxge_mac_list_add(vpath, mac))
719                         status = -EPERM;
720
721         return status;
722 }
723
724 static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header)
725 {
726         struct macInfo mac_info;
727         u8 *mac_address = NULL;
728         u64 mac_addr = 0, vpath_vector = 0;
729         int vpath_idx = 0;
730         enum vxge_hw_status status = VXGE_HW_OK;
731         struct vxge_vpath *vpath = NULL;
732
733         mac_address = (u8 *)&mac_addr;
734         memcpy(mac_address, mac_header, ETH_ALEN);
735
736         /* Is this mac address already in the list? */
737         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
738                 vpath = &vdev->vpaths[vpath_idx];
739                 if (vxge_search_mac_addr_in_list(vpath, mac_addr))
740                         return vpath_idx;
741         }
742
743         memset(&mac_info, 0, sizeof(struct macInfo));
744         memcpy(mac_info.macaddr, mac_header, ETH_ALEN);
745
746         /* Any vpath has room to add mac address to its da table? */
747         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
748                 vpath = &vdev->vpaths[vpath_idx];
749                 if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) {
750                         /* Add this mac address to this vpath */
751                         mac_info.vpath_no = vpath_idx;
752                         mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
753                         status = vxge_add_mac_addr(vdev, &mac_info);
754                         if (status != VXGE_HW_OK)
755                                 return -EPERM;
756                         return vpath_idx;
757                 }
758         }
759
760         mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST;
761         vpath_idx = 0;
762         mac_info.vpath_no = vpath_idx;
763         /* Is the first vpath already selected as catch-basin ? */
764         vpath = &vdev->vpaths[vpath_idx];
765         if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) {
766                 /* Add this mac address to this vpath */
767                 if (FALSE == vxge_mac_list_add(vpath, &mac_info))
768                         return -EPERM;
769                 return vpath_idx;
770         }
771
772         /* Select first vpath as catch-basin */
773         vpath_vector = vxge_mBIT(vpath->device_id);
774         status = vxge_hw_mgmt_reg_write(vpath->vdev->devh,
775                                 vxge_hw_mgmt_reg_type_mrpcim,
776                                 0,
777                                 (ulong)offsetof(
778                                         struct vxge_hw_mrpcim_reg,
779                                         rts_mgr_cbasin_cfg),
780                                 vpath_vector);
781         if (status != VXGE_HW_OK) {
782                 vxge_debug_tx(VXGE_ERR,
783                         "%s: Unable to set the vpath-%d in catch-basin mode",
784                         VXGE_DRIVER_NAME, vpath->device_id);
785                 return -EPERM;
786         }
787
788         if (FALSE == vxge_mac_list_add(vpath, &mac_info))
789                 return -EPERM;
790
791         return vpath_idx;
792 }
793
794 /**
795  * vxge_xmit
796  * @skb : the socket buffer containing the Tx data.
797  * @dev : device pointer.
798  *
799  * This function is the Tx entry point of the driver. Neterion NIC supports
800  * certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
801 */
802 static netdev_tx_t
803 vxge_xmit(struct sk_buff *skb, struct net_device *dev)
804 {
805         struct vxge_fifo *fifo = NULL;
806         void *dtr_priv;
807         void *dtr = NULL;
808         struct vxgedev *vdev = NULL;
809         enum vxge_hw_status status;
810         int frg_cnt, first_frg_len;
811         skb_frag_t *frag;
812         int i = 0, j = 0, avail;
813         u64 dma_pointer;
814         struct vxge_tx_priv *txdl_priv = NULL;
815         struct __vxge_hw_fifo *fifo_hw;
816         int offload_type;
817         int vpath_no = 0;
818
819         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
820                         dev->name, __func__, __LINE__);
821
822         /* A buffer with no data will be dropped */
823         if (unlikely(skb->len <= 0)) {
824                 vxge_debug_tx(VXGE_ERR,
825                         "%s: Buffer has no data..", dev->name);
826                 dev_kfree_skb_any(skb);
827                 return NETDEV_TX_OK;
828         }
829
830         vdev = netdev_priv(dev);
831
832         if (unlikely(!is_vxge_card_up(vdev))) {
833                 vxge_debug_tx(VXGE_ERR,
834                         "%s: vdev not initialized", dev->name);
835                 dev_kfree_skb_any(skb);
836                 return NETDEV_TX_OK;
837         }
838
839         if (vdev->config.addr_learn_en) {
840                 vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN);
841                 if (vpath_no == -EPERM) {
842                         vxge_debug_tx(VXGE_ERR,
843                                 "%s: Failed to store the mac address",
844                                 dev->name);
845                         dev_kfree_skb_any(skb);
846                         return NETDEV_TX_OK;
847                 }
848         }
849
850         if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING)
851                 vpath_no = skb_get_queue_mapping(skb);
852         else if (vdev->config.tx_steering_type == TX_PORT_STEERING)
853                 vpath_no = vxge_get_vpath_no(vdev, skb);
854
855         vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no);
856
857         if (vpath_no >= vdev->no_of_vpath)
858                 vpath_no = 0;
859
860         fifo = &vdev->vpaths[vpath_no].fifo;
861         fifo_hw = fifo->handle;
862
863         if (netif_tx_queue_stopped(fifo->txq))
864                 return NETDEV_TX_BUSY;
865
866         avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw);
867         if (avail == 0) {
868                 vxge_debug_tx(VXGE_ERR,
869                         "%s: No free TXDs available", dev->name);
870                 fifo->stats.txd_not_free++;
871                 goto _exit0;
872         }
873
874         /* Last TXD?  Stop tx queue to avoid dropping packets.  TX
875          * completion will resume the queue.
876          */
877         if (avail == 1)
878                 netif_tx_stop_queue(fifo->txq);
879
880         status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv);
881         if (unlikely(status != VXGE_HW_OK)) {
882                 vxge_debug_tx(VXGE_ERR,
883                    "%s: Out of descriptors .", dev->name);
884                 fifo->stats.txd_out_of_desc++;
885                 goto _exit0;
886         }
887
888         vxge_debug_tx(VXGE_TRACE,
889                 "%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p",
890                 dev->name, __func__, __LINE__,
891                 fifo_hw, dtr, dtr_priv);
892
893         if (skb_vlan_tag_present(skb)) {
894                 u16 vlan_tag = skb_vlan_tag_get(skb);
895                 vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag);
896         }
897
898         first_frg_len = skb_headlen(skb);
899
900         dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len,
901                                 PCI_DMA_TODEVICE);
902
903         if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) {
904                 vxge_hw_fifo_txdl_free(fifo_hw, dtr);
905                 fifo->stats.pci_map_fail++;
906                 goto _exit0;
907         }
908
909         txdl_priv = vxge_hw_fifo_txdl_private_get(dtr);
910         txdl_priv->skb = skb;
911         txdl_priv->dma_buffers[j] = dma_pointer;
912
913         frg_cnt = skb_shinfo(skb)->nr_frags;
914         vxge_debug_tx(VXGE_TRACE,
915                         "%s: %s:%d skb = %p txdl_priv = %p "
916                         "frag_cnt = %d dma_pointer = 0x%llx", dev->name,
917                         __func__, __LINE__, skb, txdl_priv,
918                         frg_cnt, (unsigned long long)dma_pointer);
919
920         vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer,
921                 first_frg_len);
922
923         frag = &skb_shinfo(skb)->frags[0];
924         for (i = 0; i < frg_cnt; i++) {
925                 /* ignore 0 length fragment */
926                 if (!skb_frag_size(frag))
927                         continue;
928
929                 dma_pointer = (u64)skb_frag_dma_map(&fifo->pdev->dev, frag,
930                                                     0, skb_frag_size(frag),
931                                                     DMA_TO_DEVICE);
932
933                 if (unlikely(dma_mapping_error(&fifo->pdev->dev, dma_pointer)))
934                         goto _exit2;
935                 vxge_debug_tx(VXGE_TRACE,
936                         "%s: %s:%d frag = %d dma_pointer = 0x%llx",
937                                 dev->name, __func__, __LINE__, i,
938                                 (unsigned long long)dma_pointer);
939
940                 txdl_priv->dma_buffers[j] = dma_pointer;
941                 vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer,
942                                         skb_frag_size(frag));
943                 frag += 1;
944         }
945
946         offload_type = vxge_offload_type(skb);
947
948         if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
949                 int mss = vxge_tcp_mss(skb);
950                 if (mss) {
951                         vxge_debug_tx(VXGE_TRACE, "%s: %s:%d mss = %d",
952                                 dev->name, __func__, __LINE__, mss);
953                         vxge_hw_fifo_txdl_mss_set(dtr, mss);
954                 } else {
955                         vxge_assert(skb->len <=
956                                 dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE);
957                         vxge_assert(0);
958                         goto _exit1;
959                 }
960         }
961
962         if (skb->ip_summed == CHECKSUM_PARTIAL)
963                 vxge_hw_fifo_txdl_cksum_set_bits(dtr,
964                                         VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN |
965                                         VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN |
966                                         VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN);
967
968         vxge_hw_fifo_txdl_post(fifo_hw, dtr);
969
970         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...",
971                 dev->name, __func__, __LINE__);
972         return NETDEV_TX_OK;
973
974 _exit2:
975         vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name);
976 _exit1:
977         j = 0;
978         frag = &skb_shinfo(skb)->frags[0];
979
980         pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++],
981                         skb_headlen(skb), PCI_DMA_TODEVICE);
982
983         for (; j < i; j++) {
984                 pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j],
985                         skb_frag_size(frag), PCI_DMA_TODEVICE);
986                 frag += 1;
987         }
988
989         vxge_hw_fifo_txdl_free(fifo_hw, dtr);
990 _exit0:
991         netif_tx_stop_queue(fifo->txq);
992         dev_kfree_skb_any(skb);
993
994         return NETDEV_TX_OK;
995 }
996
997 /*
998  * vxge_rx_term
999  *
1000  * Function will be called by hw function to abort all outstanding receive
1001  * descriptors.
1002  */
1003 static void
1004 vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata)
1005 {
1006         struct vxge_ring *ring = (struct vxge_ring *)userdata;
1007         struct vxge_rx_priv *rx_priv =
1008                 vxge_hw_ring_rxd_private_get(dtrh);
1009
1010         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
1011                         ring->ndev->name, __func__, __LINE__);
1012         if (state != VXGE_HW_RXD_STATE_POSTED)
1013                 return;
1014
1015         pci_unmap_single(ring->pdev, rx_priv->data_dma,
1016                 rx_priv->data_size, PCI_DMA_FROMDEVICE);
1017
1018         dev_kfree_skb(rx_priv->skb);
1019         rx_priv->skb_data = NULL;
1020
1021         vxge_debug_entryexit(VXGE_TRACE,
1022                 "%s: %s:%d  Exiting...",
1023                 ring->ndev->name, __func__, __LINE__);
1024 }
1025
1026 /*
1027  * vxge_tx_term
1028  *
1029  * Function will be called to abort all outstanding tx descriptors
1030  */
1031 static void
1032 vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata)
1033 {
1034         struct vxge_fifo *fifo = (struct vxge_fifo *)userdata;
1035         skb_frag_t *frag;
1036         int i = 0, j, frg_cnt;
1037         struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh);
1038         struct sk_buff *skb = txd_priv->skb;
1039
1040         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
1041
1042         if (state != VXGE_HW_TXDL_STATE_POSTED)
1043                 return;
1044
1045         /* check skb validity */
1046         vxge_assert(skb);
1047         frg_cnt = skb_shinfo(skb)->nr_frags;
1048         frag = &skb_shinfo(skb)->frags[0];
1049
1050         /*  for unfragmented skb */
1051         pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++],
1052                 skb_headlen(skb), PCI_DMA_TODEVICE);
1053
1054         for (j = 0; j < frg_cnt; j++) {
1055                 pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++],
1056                                skb_frag_size(frag), PCI_DMA_TODEVICE);
1057                 frag += 1;
1058         }
1059
1060         dev_kfree_skb(skb);
1061
1062         vxge_debug_entryexit(VXGE_TRACE,
1063                 "%s:%d  Exiting...", __func__, __LINE__);
1064 }
1065
1066 static int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac)
1067 {
1068         struct list_head *entry, *next;
1069         u64 del_mac = 0;
1070         u8 *mac_address = (u8 *) (&del_mac);
1071
1072         /* Copy the mac address to delete from the list */
1073         memcpy(mac_address, mac->macaddr, ETH_ALEN);
1074
1075         list_for_each_safe(entry, next, &vpath->mac_addr_list) {
1076                 if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) {
1077                         list_del(entry);
1078                         kfree((struct vxge_mac_addrs *)entry);
1079                         vpath->mac_addr_cnt--;
1080
1081                         if (is_multicast_ether_addr(mac->macaddr))
1082                                 vpath->mcast_addr_cnt--;
1083                         return TRUE;
1084                 }
1085         }
1086
1087         return FALSE;
1088 }
1089
1090 /* delete a mac address from DA table */
1091 static enum vxge_hw_status
1092 vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac)
1093 {
1094         enum vxge_hw_status status = VXGE_HW_OK;
1095         struct vxge_vpath *vpath;
1096
1097         vpath = &vdev->vpaths[mac->vpath_no];
1098         status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr,
1099                                                 mac->macmask);
1100         if (status != VXGE_HW_OK) {
1101                 vxge_debug_init(VXGE_ERR,
1102                         "DA config delete entry failed for vpath:%d",
1103                         vpath->device_id);
1104         } else
1105                 vxge_mac_list_del(vpath, mac);
1106         return status;
1107 }
1108
1109 /**
1110  * vxge_set_multicast
1111  * @dev: pointer to the device structure
1112  *
1113  * Entry point for multicast address enable/disable
1114  * This function is a driver entry point which gets called by the kernel
1115  * whenever multicast addresses must be enabled/disabled. This also gets
1116  * called to set/reset promiscuous mode. Depending on the deivce flag, we
1117  * determine, if multicast address must be enabled or if promiscuous mode
1118  * is to be disabled etc.
1119  */
1120 static void vxge_set_multicast(struct net_device *dev)
1121 {
1122         struct netdev_hw_addr *ha;
1123         struct vxgedev *vdev;
1124         int i, mcast_cnt = 0;
1125         struct __vxge_hw_device *hldev;
1126         struct vxge_vpath *vpath;
1127         enum vxge_hw_status status = VXGE_HW_OK;
1128         struct macInfo mac_info;
1129         int vpath_idx = 0;
1130         struct vxge_mac_addrs *mac_entry;
1131         struct list_head *list_head;
1132         struct list_head *entry, *next;
1133         u8 *mac_address = NULL;
1134
1135         vxge_debug_entryexit(VXGE_TRACE,
1136                 "%s:%d", __func__, __LINE__);
1137
1138         vdev = netdev_priv(dev);
1139         hldev = vdev->devh;
1140
1141         if (unlikely(!is_vxge_card_up(vdev)))
1142                 return;
1143
1144         if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) {
1145                 for (i = 0; i < vdev->no_of_vpath; i++) {
1146                         vpath = &vdev->vpaths[i];
1147                         vxge_assert(vpath->is_open);
1148                         status = vxge_hw_vpath_mcast_enable(vpath->handle);
1149                         if (status != VXGE_HW_OK)
1150                                 vxge_debug_init(VXGE_ERR, "failed to enable "
1151                                                 "multicast, status %d", status);
1152                         vdev->all_multi_flg = 1;
1153                 }
1154         } else if (!(dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) {
1155                 for (i = 0; i < vdev->no_of_vpath; i++) {
1156                         vpath = &vdev->vpaths[i];
1157                         vxge_assert(vpath->is_open);
1158                         status = vxge_hw_vpath_mcast_disable(vpath->handle);
1159                         if (status != VXGE_HW_OK)
1160                                 vxge_debug_init(VXGE_ERR, "failed to disable "
1161                                                 "multicast, status %d", status);
1162                         vdev->all_multi_flg = 0;
1163                 }
1164         }
1165
1166
1167         if (!vdev->config.addr_learn_en) {
1168                 for (i = 0; i < vdev->no_of_vpath; i++) {
1169                         vpath = &vdev->vpaths[i];
1170                         vxge_assert(vpath->is_open);
1171
1172                         if (dev->flags & IFF_PROMISC)
1173                                 status = vxge_hw_vpath_promisc_enable(
1174                                         vpath->handle);
1175                         else
1176                                 status = vxge_hw_vpath_promisc_disable(
1177                                         vpath->handle);
1178                         if (status != VXGE_HW_OK)
1179                                 vxge_debug_init(VXGE_ERR, "failed to %s promisc"
1180                                         ", status %d", dev->flags&IFF_PROMISC ?
1181                                         "enable" : "disable", status);
1182                 }
1183         }
1184
1185         memset(&mac_info, 0, sizeof(struct macInfo));
1186         /* Update individual M_CAST address list */
1187         if ((!vdev->all_multi_flg) && netdev_mc_count(dev)) {
1188                 mcast_cnt = vdev->vpaths[0].mcast_addr_cnt;
1189                 list_head = &vdev->vpaths[0].mac_addr_list;
1190                 if ((netdev_mc_count(dev) +
1191                         (vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) >
1192                                 vdev->vpaths[0].max_mac_addr_cnt)
1193                         goto _set_all_mcast;
1194
1195                 /* Delete previous MC's */
1196                 for (i = 0; i < mcast_cnt; i++) {
1197                         list_for_each_safe(entry, next, list_head) {
1198                                 mac_entry = (struct vxge_mac_addrs *)entry;
1199                                 /* Copy the mac address to delete */
1200                                 mac_address = (u8 *)&mac_entry->macaddr;
1201                                 memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
1202
1203                                 if (is_multicast_ether_addr(mac_info.macaddr)) {
1204                                         for (vpath_idx = 0; vpath_idx <
1205                                                 vdev->no_of_vpath;
1206                                                 vpath_idx++) {
1207                                                 mac_info.vpath_no = vpath_idx;
1208                                                 status = vxge_del_mac_addr(
1209                                                                 vdev,
1210                                                                 &mac_info);
1211                                         }
1212                                 }
1213                         }
1214                 }
1215
1216                 /* Add new ones */
1217                 netdev_for_each_mc_addr(ha, dev) {
1218                         memcpy(mac_info.macaddr, ha->addr, ETH_ALEN);
1219                         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath;
1220                                         vpath_idx++) {
1221                                 mac_info.vpath_no = vpath_idx;
1222                                 mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
1223                                 status = vxge_add_mac_addr(vdev, &mac_info);
1224                                 if (status != VXGE_HW_OK) {
1225                                         vxge_debug_init(VXGE_ERR,
1226                                                 "%s:%d Setting individual"
1227                                                 "multicast address failed",
1228                                                 __func__, __LINE__);
1229                                         goto _set_all_mcast;
1230                                 }
1231                         }
1232                 }
1233
1234                 return;
1235 _set_all_mcast:
1236                 mcast_cnt = vdev->vpaths[0].mcast_addr_cnt;
1237                 /* Delete previous MC's */
1238                 for (i = 0; i < mcast_cnt; i++) {
1239                         list_for_each_safe(entry, next, list_head) {
1240                                 mac_entry = (struct vxge_mac_addrs *)entry;
1241                                 /* Copy the mac address to delete */
1242                                 mac_address = (u8 *)&mac_entry->macaddr;
1243                                 memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
1244
1245                                 if (is_multicast_ether_addr(mac_info.macaddr))
1246                                         break;
1247                         }
1248
1249                         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath;
1250                                         vpath_idx++) {
1251                                 mac_info.vpath_no = vpath_idx;
1252                                 status = vxge_del_mac_addr(vdev, &mac_info);
1253                         }
1254                 }
1255
1256                 /* Enable all multicast */
1257                 for (i = 0; i < vdev->no_of_vpath; i++) {
1258                         vpath = &vdev->vpaths[i];
1259                         vxge_assert(vpath->is_open);
1260
1261                         status = vxge_hw_vpath_mcast_enable(vpath->handle);
1262                         if (status != VXGE_HW_OK) {
1263                                 vxge_debug_init(VXGE_ERR,
1264                                         "%s:%d Enabling all multicasts failed",
1265                                          __func__, __LINE__);
1266                         }
1267                         vdev->all_multi_flg = 1;
1268                 }
1269                 dev->flags |= IFF_ALLMULTI;
1270         }
1271
1272         vxge_debug_entryexit(VXGE_TRACE,
1273                 "%s:%d  Exiting...", __func__, __LINE__);
1274 }
1275
1276 /**
1277  * vxge_set_mac_addr
1278  * @dev: pointer to the device structure
1279  *
1280  * Update entry "0" (default MAC addr)
1281  */
1282 static int vxge_set_mac_addr(struct net_device *dev, void *p)
1283 {
1284         struct sockaddr *addr = p;
1285         struct vxgedev *vdev;
1286         struct __vxge_hw_device *hldev;
1287         enum vxge_hw_status status = VXGE_HW_OK;
1288         struct macInfo mac_info_new, mac_info_old;
1289         int vpath_idx = 0;
1290
1291         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
1292
1293         vdev = netdev_priv(dev);
1294         hldev = vdev->devh;
1295
1296         if (!is_valid_ether_addr(addr->sa_data))
1297                 return -EINVAL;
1298
1299         memset(&mac_info_new, 0, sizeof(struct macInfo));
1300         memset(&mac_info_old, 0, sizeof(struct macInfo));
1301
1302         vxge_debug_entryexit(VXGE_TRACE, "%s:%d  Exiting...",
1303                 __func__, __LINE__);
1304
1305         /* Get the old address */
1306         memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len);
1307
1308         /* Copy the new address */
1309         memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len);
1310
1311         /* First delete the old mac address from all the vpaths
1312         as we can't specify the index while adding new mac address */
1313         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
1314                 struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx];
1315                 if (!vpath->is_open) {
1316                         /* This can happen when this interface is added/removed
1317                         to the bonding interface. Delete this station address
1318                         from the linked list */
1319                         vxge_mac_list_del(vpath, &mac_info_old);
1320
1321                         /* Add this new address to the linked list
1322                         for later restoring */
1323                         vxge_mac_list_add(vpath, &mac_info_new);
1324
1325                         continue;
1326                 }
1327                 /* Delete the station address */
1328                 mac_info_old.vpath_no = vpath_idx;
1329                 status = vxge_del_mac_addr(vdev, &mac_info_old);
1330         }
1331
1332         if (unlikely(!is_vxge_card_up(vdev))) {
1333                 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1334                 return VXGE_HW_OK;
1335         }
1336
1337         /* Set this mac address to all the vpaths */
1338         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
1339                 mac_info_new.vpath_no = vpath_idx;
1340                 mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
1341                 status = vxge_add_mac_addr(vdev, &mac_info_new);
1342                 if (status != VXGE_HW_OK)
1343                         return -EINVAL;
1344         }
1345
1346         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1347
1348         return status;
1349 }
1350
1351 /*
1352  * vxge_vpath_intr_enable
1353  * @vdev: pointer to vdev
1354  * @vp_id: vpath for which to enable the interrupts
1355  *
1356  * Enables the interrupts for the vpath
1357 */
1358 static void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id)
1359 {
1360         struct vxge_vpath *vpath = &vdev->vpaths[vp_id];
1361         int msix_id = 0;
1362         int tim_msix_id[4] = {0, 1, 0, 0};
1363         int alarm_msix_id = VXGE_ALARM_MSIX_ID;
1364
1365         vxge_hw_vpath_intr_enable(vpath->handle);
1366
1367         if (vdev->config.intr_type == INTA)
1368                 vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle);
1369         else {
1370                 vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id,
1371                         alarm_msix_id);
1372
1373                 msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE;
1374                 vxge_hw_vpath_msix_unmask(vpath->handle, msix_id);
1375                 vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1);
1376
1377                 /* enable the alarm vector */
1378                 msix_id = (vpath->handle->vpath->hldev->first_vp_id *
1379                         VXGE_HW_VPATH_MSIX_ACTIVE) + alarm_msix_id;
1380                 vxge_hw_vpath_msix_unmask(vpath->handle, msix_id);
1381         }
1382 }
1383
1384 /*
1385  * vxge_vpath_intr_disable
1386  * @vdev: pointer to vdev
1387  * @vp_id: vpath for which to disable the interrupts
1388  *
1389  * Disables the interrupts for the vpath
1390 */
1391 static void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id)
1392 {
1393         struct vxge_vpath *vpath = &vdev->vpaths[vp_id];
1394         struct __vxge_hw_device *hldev;
1395         int msix_id;
1396
1397         hldev = pci_get_drvdata(vdev->pdev);
1398
1399         vxge_hw_vpath_wait_receive_idle(hldev, vpath->device_id);
1400
1401         vxge_hw_vpath_intr_disable(vpath->handle);
1402
1403         if (vdev->config.intr_type == INTA)
1404                 vxge_hw_vpath_inta_mask_tx_rx(vpath->handle);
1405         else {
1406                 msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE;
1407                 vxge_hw_vpath_msix_mask(vpath->handle, msix_id);
1408                 vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1);
1409
1410                 /* disable the alarm vector */
1411                 msix_id = (vpath->handle->vpath->hldev->first_vp_id *
1412                         VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;
1413                 vxge_hw_vpath_msix_mask(vpath->handle, msix_id);
1414         }
1415 }
1416
1417 /* list all mac addresses from DA table */
1418 static enum vxge_hw_status
1419 vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath, struct macInfo *mac)
1420 {
1421         enum vxge_hw_status status = VXGE_HW_OK;
1422         unsigned char macmask[ETH_ALEN];
1423         unsigned char macaddr[ETH_ALEN];
1424
1425         status = vxge_hw_vpath_mac_addr_get(vpath->handle,
1426                                 macaddr, macmask);
1427         if (status != VXGE_HW_OK) {
1428                 vxge_debug_init(VXGE_ERR,
1429                         "DA config list entry failed for vpath:%d",
1430                         vpath->device_id);
1431                 return status;
1432         }
1433
1434         while (!ether_addr_equal(mac->macaddr, macaddr)) {
1435                 status = vxge_hw_vpath_mac_addr_get_next(vpath->handle,
1436                                 macaddr, macmask);
1437                 if (status != VXGE_HW_OK)
1438                         break;
1439         }
1440
1441         return status;
1442 }
1443
1444 /* Store all mac addresses from the list to the DA table */
1445 static enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath)
1446 {
1447         enum vxge_hw_status status = VXGE_HW_OK;
1448         struct macInfo mac_info;
1449         u8 *mac_address = NULL;
1450         struct list_head *entry, *next;
1451
1452         memset(&mac_info, 0, sizeof(struct macInfo));
1453
1454         if (vpath->is_open) {
1455                 list_for_each_safe(entry, next, &vpath->mac_addr_list) {
1456                         mac_address =
1457                                 (u8 *)&
1458                                 ((struct vxge_mac_addrs *)entry)->macaddr;
1459                         memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
1460                         ((struct vxge_mac_addrs *)entry)->state =
1461                                 VXGE_LL_MAC_ADDR_IN_DA_TABLE;
1462                         /* does this mac address already exist in da table? */
1463                         status = vxge_search_mac_addr_in_da_table(vpath,
1464                                 &mac_info);
1465                         if (status != VXGE_HW_OK) {
1466                                 /* Add this mac address to the DA table */
1467                                 status = vxge_hw_vpath_mac_addr_add(
1468                                         vpath->handle, mac_info.macaddr,
1469                                         mac_info.macmask,
1470                                     VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE);
1471                                 if (status != VXGE_HW_OK) {
1472                                         vxge_debug_init(VXGE_ERR,
1473                                             "DA add entry failed for vpath:%d",
1474                                             vpath->device_id);
1475                                         ((struct vxge_mac_addrs *)entry)->state
1476                                                 = VXGE_LL_MAC_ADDR_IN_LIST;
1477                                 }
1478                         }
1479                 }
1480         }
1481
1482         return status;
1483 }
1484
1485 /* Store all vlan ids from the list to the vid table */
1486 static enum vxge_hw_status
1487 vxge_restore_vpath_vid_table(struct vxge_vpath *vpath)
1488 {
1489         enum vxge_hw_status status = VXGE_HW_OK;
1490         struct vxgedev *vdev = vpath->vdev;
1491         u16 vid;
1492
1493         if (!vpath->is_open)
1494                 return status;
1495
1496         for_each_set_bit(vid, vdev->active_vlans, VLAN_N_VID)
1497                 status = vxge_hw_vpath_vid_add(vpath->handle, vid);
1498
1499         return status;
1500 }
1501
1502 /*
1503  * vxge_reset_vpath
1504  * @vdev: pointer to vdev
1505  * @vp_id: vpath to reset
1506  *
1507  * Resets the vpath
1508 */
1509 static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id)
1510 {
1511         enum vxge_hw_status status = VXGE_HW_OK;
1512         struct vxge_vpath *vpath = &vdev->vpaths[vp_id];
1513         int ret = 0;
1514
1515         /* check if device is down already */
1516         if (unlikely(!is_vxge_card_up(vdev)))
1517                 return 0;
1518
1519         /* is device reset already scheduled */
1520         if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
1521                 return 0;
1522
1523         if (vpath->handle) {
1524                 if (vxge_hw_vpath_reset(vpath->handle) == VXGE_HW_OK) {
1525                         if (is_vxge_card_up(vdev) &&
1526                                 vxge_hw_vpath_recover_from_reset(vpath->handle)
1527                                         != VXGE_HW_OK) {
1528                                 vxge_debug_init(VXGE_ERR,
1529                                         "vxge_hw_vpath_recover_from_reset"
1530                                         "failed for vpath:%d", vp_id);
1531                                 return status;
1532                         }
1533                 } else {
1534                         vxge_debug_init(VXGE_ERR,
1535                                 "vxge_hw_vpath_reset failed for"
1536                                 "vpath:%d", vp_id);
1537                                 return status;
1538                 }
1539         } else
1540                 return VXGE_HW_FAIL;
1541
1542         vxge_restore_vpath_mac_addr(vpath);
1543         vxge_restore_vpath_vid_table(vpath);
1544
1545         /* Enable all broadcast */
1546         vxge_hw_vpath_bcast_enable(vpath->handle);
1547
1548         /* Enable all multicast */
1549         if (vdev->all_multi_flg) {
1550                 status = vxge_hw_vpath_mcast_enable(vpath->handle);
1551                 if (status != VXGE_HW_OK)
1552                         vxge_debug_init(VXGE_ERR,
1553                                 "%s:%d Enabling multicast failed",
1554                                 __func__, __LINE__);
1555         }
1556
1557         /* Enable the interrupts */
1558         vxge_vpath_intr_enable(vdev, vp_id);
1559
1560         smp_wmb();
1561
1562         /* Enable the flow of traffic through the vpath */
1563         vxge_hw_vpath_enable(vpath->handle);
1564
1565         smp_wmb();
1566         vxge_hw_vpath_rx_doorbell_init(vpath->handle);
1567         vpath->ring.last_status = VXGE_HW_OK;
1568
1569         /* Vpath reset done */
1570         clear_bit(vp_id, &vdev->vp_reset);
1571
1572         /* Start the vpath queue */
1573         if (netif_tx_queue_stopped(vpath->fifo.txq))
1574                 netif_tx_wake_queue(vpath->fifo.txq);
1575
1576         return ret;
1577 }
1578
1579 /* Configure CI */
1580 static void vxge_config_ci_for_tti_rti(struct vxgedev *vdev)
1581 {
1582         int i = 0;
1583
1584         /* Enable CI for RTI */
1585         if (vdev->config.intr_type == MSI_X) {
1586                 for (i = 0; i < vdev->no_of_vpath; i++) {
1587                         struct __vxge_hw_ring *hw_ring;
1588
1589                         hw_ring = vdev->vpaths[i].ring.handle;
1590                         vxge_hw_vpath_dynamic_rti_ci_set(hw_ring);
1591                 }
1592         }
1593
1594         /* Enable CI for TTI */
1595         for (i = 0; i < vdev->no_of_vpath; i++) {
1596                 struct __vxge_hw_fifo *hw_fifo = vdev->vpaths[i].fifo.handle;
1597                 vxge_hw_vpath_tti_ci_set(hw_fifo);
1598                 /*
1599                  * For Inta (with or without napi), Set CI ON for only one
1600                  * vpath. (Have only one free running timer).
1601                  */
1602                 if ((vdev->config.intr_type == INTA) && (i == 0))
1603                         break;
1604         }
1605
1606         return;
1607 }
1608
1609 static int do_vxge_reset(struct vxgedev *vdev, int event)
1610 {
1611         enum vxge_hw_status status;
1612         int ret = 0, vp_id, i;
1613
1614         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
1615
1616         if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) {
1617                 /* check if device is down already */
1618                 if (unlikely(!is_vxge_card_up(vdev)))
1619                         return 0;
1620
1621                 /* is reset already scheduled */
1622                 if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
1623                         return 0;
1624         }
1625
1626         if (event == VXGE_LL_FULL_RESET) {
1627                 netif_carrier_off(vdev->ndev);
1628
1629                 /* wait for all the vpath reset to complete */
1630                 for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
1631                         while (test_bit(vp_id, &vdev->vp_reset))
1632                                 msleep(50);
1633                 }
1634
1635                 netif_carrier_on(vdev->ndev);
1636
1637                 /* if execution mode is set to debug, don't reset the adapter */
1638                 if (unlikely(vdev->exec_mode)) {
1639                         vxge_debug_init(VXGE_ERR,
1640                                 "%s: execution mode is debug, returning..",
1641                                 vdev->ndev->name);
1642                         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
1643                         netif_tx_stop_all_queues(vdev->ndev);
1644                         return 0;
1645                 }
1646         }
1647
1648         if (event == VXGE_LL_FULL_RESET) {
1649                 vxge_hw_device_wait_receive_idle(vdev->devh);
1650                 vxge_hw_device_intr_disable(vdev->devh);
1651
1652                 switch (vdev->cric_err_event) {
1653                 case VXGE_HW_EVENT_UNKNOWN:
1654                         netif_tx_stop_all_queues(vdev->ndev);
1655                         vxge_debug_init(VXGE_ERR,
1656                                 "fatal: %s: Disabling device due to"
1657                                 "unknown error",
1658                                 vdev->ndev->name);
1659                         ret = -EPERM;
1660                         goto out;
1661                 case VXGE_HW_EVENT_RESET_START:
1662                         break;
1663                 case VXGE_HW_EVENT_RESET_COMPLETE:
1664                 case VXGE_HW_EVENT_LINK_DOWN:
1665                 case VXGE_HW_EVENT_LINK_UP:
1666                 case VXGE_HW_EVENT_ALARM_CLEARED:
1667                 case VXGE_HW_EVENT_ECCERR:
1668                 case VXGE_HW_EVENT_MRPCIM_ECCERR:
1669                         ret = -EPERM;
1670                         goto out;
1671                 case VXGE_HW_EVENT_FIFO_ERR:
1672                 case VXGE_HW_EVENT_VPATH_ERR:
1673                         break;
1674                 case VXGE_HW_EVENT_CRITICAL_ERR:
1675                         netif_tx_stop_all_queues(vdev->ndev);
1676                         vxge_debug_init(VXGE_ERR,
1677                                 "fatal: %s: Disabling device due to"
1678                                 "serious error",
1679                                 vdev->ndev->name);
1680                         /* SOP or device reset required */
1681                         /* This event is not currently used */
1682                         ret = -EPERM;
1683                         goto out;
1684                 case VXGE_HW_EVENT_SERR:
1685                         netif_tx_stop_all_queues(vdev->ndev);
1686                         vxge_debug_init(VXGE_ERR,
1687                                 "fatal: %s: Disabling device due to"
1688                                 "serious error",
1689                                 vdev->ndev->name);
1690                         ret = -EPERM;
1691                         goto out;
1692                 case VXGE_HW_EVENT_SRPCIM_SERR:
1693                 case VXGE_HW_EVENT_MRPCIM_SERR:
1694                         ret = -EPERM;
1695                         goto out;
1696                 case VXGE_HW_EVENT_SLOT_FREEZE:
1697                         netif_tx_stop_all_queues(vdev->ndev);
1698                         vxge_debug_init(VXGE_ERR,
1699                                 "fatal: %s: Disabling device due to"
1700                                 "slot freeze",
1701                                 vdev->ndev->name);
1702                         ret = -EPERM;
1703                         goto out;
1704                 default:
1705                         break;
1706
1707                 }
1708         }
1709
1710         if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET))
1711                 netif_tx_stop_all_queues(vdev->ndev);
1712
1713         if (event == VXGE_LL_FULL_RESET) {
1714                 status = vxge_reset_all_vpaths(vdev);
1715                 if (status != VXGE_HW_OK) {
1716                         vxge_debug_init(VXGE_ERR,
1717                                 "fatal: %s: can not reset vpaths",
1718                                 vdev->ndev->name);
1719                         ret = -EPERM;
1720                         goto out;
1721                 }
1722         }
1723
1724         if (event == VXGE_LL_COMPL_RESET) {
1725                 for (i = 0; i < vdev->no_of_vpath; i++)
1726                         if (vdev->vpaths[i].handle) {
1727                                 if (vxge_hw_vpath_recover_from_reset(
1728                                         vdev->vpaths[i].handle)
1729                                                 != VXGE_HW_OK) {
1730                                         vxge_debug_init(VXGE_ERR,
1731                                                 "vxge_hw_vpath_recover_"
1732                                                 "from_reset failed for vpath: "
1733                                                 "%d", i);
1734                                         ret = -EPERM;
1735                                         goto out;
1736                                 }
1737                                 } else {
1738                                         vxge_debug_init(VXGE_ERR,
1739                                         "vxge_hw_vpath_reset failed for "
1740                                                 "vpath:%d", i);
1741                                         ret = -EPERM;
1742                                         goto out;
1743                                 }
1744         }
1745
1746         if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) {
1747                 /* Reprogram the DA table with populated mac addresses */
1748                 for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
1749                         vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]);
1750                         vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]);
1751                 }
1752
1753                 /* enable vpath interrupts */
1754                 for (i = 0; i < vdev->no_of_vpath; i++)
1755                         vxge_vpath_intr_enable(vdev, i);
1756
1757                 vxge_hw_device_intr_enable(vdev->devh);
1758
1759                 smp_wmb();
1760
1761                 /* Indicate card up */
1762                 set_bit(__VXGE_STATE_CARD_UP, &vdev->state);
1763
1764                 /* Get the traffic to flow through the vpaths */
1765                 for (i = 0; i < vdev->no_of_vpath; i++) {
1766                         vxge_hw_vpath_enable(vdev->vpaths[i].handle);
1767                         smp_wmb();
1768                         vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle);
1769                 }
1770
1771                 netif_tx_wake_all_queues(vdev->ndev);
1772         }
1773
1774         /* configure CI */
1775         vxge_config_ci_for_tti_rti(vdev);
1776
1777 out:
1778         vxge_debug_entryexit(VXGE_TRACE,
1779                 "%s:%d  Exiting...", __func__, __LINE__);
1780
1781         /* Indicate reset done */
1782         if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET))
1783                 clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state);
1784         return ret;
1785 }
1786
1787 /*
1788  * vxge_reset
1789  * @vdev: pointer to ll device
1790  *
1791  * driver may reset the chip on events of serr, eccerr, etc
1792  */
1793 static void vxge_reset(struct work_struct *work)
1794 {
1795         struct vxgedev *vdev = container_of(work, struct vxgedev, reset_task);
1796
1797         if (!netif_running(vdev->ndev))
1798                 return;
1799
1800         do_vxge_reset(vdev, VXGE_LL_FULL_RESET);
1801 }
1802
1803 /**
1804  * vxge_poll - Receive handler when Receive Polling is used.
1805  * @dev: pointer to the device structure.
1806  * @budget: Number of packets budgeted to be processed in this iteration.
1807  *
1808  * This function comes into picture only if Receive side is being handled
1809  * through polling (called NAPI in linux). It mostly does what the normal
1810  * Rx interrupt handler does in terms of descriptor and packet processing
1811  * but not in an interrupt context. Also it will process a specified number
1812  * of packets at most in one iteration. This value is passed down by the
1813  * kernel as the function argument 'budget'.
1814  */
1815 static int vxge_poll_msix(struct napi_struct *napi, int budget)
1816 {
1817         struct vxge_ring *ring = container_of(napi, struct vxge_ring, napi);
1818         int pkts_processed;
1819         int budget_org = budget;
1820
1821         ring->budget = budget;
1822         ring->pkts_processed = 0;
1823         vxge_hw_vpath_poll_rx(ring->handle);
1824         pkts_processed = ring->pkts_processed;
1825
1826         if (ring->pkts_processed < budget_org) {
1827                 napi_complete(napi);
1828
1829                 /* Re enable the Rx interrupts for the vpath */
1830                 vxge_hw_channel_msix_unmask(
1831                                 (struct __vxge_hw_channel *)ring->handle,
1832                                 ring->rx_vector_no);
1833                 mmiowb();
1834         }
1835
1836         /* We are copying and returning the local variable, in case if after
1837          * clearing the msix interrupt above, if the interrupt fires right
1838          * away which can preempt this NAPI thread */
1839         return pkts_processed;
1840 }
1841
1842 static int vxge_poll_inta(struct napi_struct *napi, int budget)
1843 {
1844         struct vxgedev *vdev = container_of(napi, struct vxgedev, napi);
1845         int pkts_processed = 0;
1846         int i;
1847         int budget_org = budget;
1848         struct vxge_ring *ring;
1849
1850         struct __vxge_hw_device *hldev = pci_get_drvdata(vdev->pdev);
1851
1852         for (i = 0; i < vdev->no_of_vpath; i++) {
1853                 ring = &vdev->vpaths[i].ring;
1854                 ring->budget = budget;
1855                 ring->pkts_processed = 0;
1856                 vxge_hw_vpath_poll_rx(ring->handle);
1857                 pkts_processed += ring->pkts_processed;
1858                 budget -= ring->pkts_processed;
1859                 if (budget <= 0)
1860                         break;
1861         }
1862
1863         VXGE_COMPLETE_ALL_TX(vdev);
1864
1865         if (pkts_processed < budget_org) {
1866                 napi_complete(napi);
1867                 /* Re enable the Rx interrupts for the ring */
1868                 vxge_hw_device_unmask_all(hldev);
1869                 vxge_hw_device_flush_io(hldev);
1870         }
1871
1872         return pkts_processed;
1873 }
1874
1875 #ifdef CONFIG_NET_POLL_CONTROLLER
1876 /**
1877  * vxge_netpoll - netpoll event handler entry point
1878  * @dev : pointer to the device structure.
1879  * Description:
1880  *      This function will be called by upper layer to check for events on the
1881  * interface in situations where interrupts are disabled. It is used for
1882  * specific in-kernel networking tasks, such as remote consoles and kernel
1883  * debugging over the network (example netdump in RedHat).
1884  */
1885 static void vxge_netpoll(struct net_device *dev)
1886 {
1887         struct vxgedev *vdev = netdev_priv(dev);
1888         struct pci_dev *pdev = vdev->pdev;
1889         struct __vxge_hw_device *hldev = pci_get_drvdata(pdev);
1890         const int irq = pdev->irq;
1891
1892         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
1893
1894         if (pci_channel_offline(pdev))
1895                 return;
1896
1897         disable_irq(irq);
1898         vxge_hw_device_clear_tx_rx(hldev);
1899
1900         vxge_hw_device_clear_tx_rx(hldev);
1901         VXGE_COMPLETE_ALL_RX(vdev);
1902         VXGE_COMPLETE_ALL_TX(vdev);
1903
1904         enable_irq(irq);
1905
1906         vxge_debug_entryexit(VXGE_TRACE,
1907                 "%s:%d  Exiting...", __func__, __LINE__);
1908 }
1909 #endif
1910
1911 /* RTH configuration */
1912 static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev)
1913 {
1914         enum vxge_hw_status status = VXGE_HW_OK;
1915         struct vxge_hw_rth_hash_types hash_types;
1916         u8 itable[256] = {0}; /* indirection table */
1917         u8 mtable[256] = {0}; /* CPU to vpath mapping  */
1918         int index;
1919
1920         /*
1921          * Filling
1922          *      - itable with bucket numbers
1923          *      - mtable with bucket-to-vpath mapping
1924          */
1925         for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) {
1926                 itable[index] = index;
1927                 mtable[index] = index % vdev->no_of_vpath;
1928         }
1929
1930         /* set indirection table, bucket-to-vpath mapping */
1931         status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles,
1932                                                 vdev->no_of_vpath,
1933                                                 mtable, itable,
1934                                                 vdev->config.rth_bkt_sz);
1935         if (status != VXGE_HW_OK) {
1936                 vxge_debug_init(VXGE_ERR,
1937                         "RTH indirection table configuration failed "
1938                         "for vpath:%d", vdev->vpaths[0].device_id);
1939                 return status;
1940         }
1941
1942         /* Fill RTH hash types */
1943         hash_types.hash_type_tcpipv4_en   = vdev->config.rth_hash_type_tcpipv4;
1944         hash_types.hash_type_ipv4_en      = vdev->config.rth_hash_type_ipv4;
1945         hash_types.hash_type_tcpipv6_en   = vdev->config.rth_hash_type_tcpipv6;
1946         hash_types.hash_type_ipv6_en      = vdev->config.rth_hash_type_ipv6;
1947         hash_types.hash_type_tcpipv6ex_en =
1948                                         vdev->config.rth_hash_type_tcpipv6ex;
1949         hash_types.hash_type_ipv6ex_en    = vdev->config.rth_hash_type_ipv6ex;
1950
1951         /*
1952          * Because the itable_set() method uses the active_table field
1953          * for the target virtual path the RTH config should be updated
1954          * for all VPATHs. The h/w only uses the lowest numbered VPATH
1955          * when steering frames.
1956          */
1957          for (index = 0; index < vdev->no_of_vpath; index++) {
1958                 status = vxge_hw_vpath_rts_rth_set(
1959                                 vdev->vpaths[index].handle,
1960                                 vdev->config.rth_algorithm,
1961                                 &hash_types,
1962                                 vdev->config.rth_bkt_sz);
1963                  if (status != VXGE_HW_OK) {
1964                         vxge_debug_init(VXGE_ERR,
1965                                 "RTH configuration failed for vpath:%d",
1966                                 vdev->vpaths[index].device_id);
1967                         return status;
1968                  }
1969          }
1970
1971         return status;
1972 }
1973
1974 /* reset vpaths */
1975 static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev)
1976 {
1977         enum vxge_hw_status status = VXGE_HW_OK;
1978         struct vxge_vpath *vpath;
1979         int i;
1980
1981         for (i = 0; i < vdev->no_of_vpath; i++) {
1982                 vpath = &vdev->vpaths[i];
1983                 if (vpath->handle) {
1984                         if (vxge_hw_vpath_reset(vpath->handle) == VXGE_HW_OK) {
1985                                 if (is_vxge_card_up(vdev) &&
1986                                         vxge_hw_vpath_recover_from_reset(
1987                                                 vpath->handle) != VXGE_HW_OK) {
1988                                         vxge_debug_init(VXGE_ERR,
1989                                                 "vxge_hw_vpath_recover_"
1990                                                 "from_reset failed for vpath: "
1991                                                 "%d", i);
1992                                         return status;
1993                                 }
1994                         } else {
1995                                 vxge_debug_init(VXGE_ERR,
1996                                         "vxge_hw_vpath_reset failed for "
1997                                         "vpath:%d", i);
1998                                         return status;
1999                         }
2000                 }
2001         }
2002
2003         return status;
2004 }
2005
2006 /* close vpaths */
2007 static void vxge_close_vpaths(struct vxgedev *vdev, int index)
2008 {
2009         struct vxge_vpath *vpath;
2010         int i;
2011
2012         for (i = index; i < vdev->no_of_vpath; i++) {
2013                 vpath = &vdev->vpaths[i];
2014
2015                 if (vpath->handle && vpath->is_open) {
2016                         vxge_hw_vpath_close(vpath->handle);
2017                         vdev->stats.vpaths_open--;
2018                 }
2019                 vpath->is_open = 0;
2020                 vpath->handle = NULL;
2021         }
2022 }
2023
2024 /* open vpaths */
2025 static int vxge_open_vpaths(struct vxgedev *vdev)
2026 {
2027         struct vxge_hw_vpath_attr attr;
2028         enum vxge_hw_status status;
2029         struct vxge_vpath *vpath;
2030         u32 vp_id = 0;
2031         int i;
2032
2033         for (i = 0; i < vdev->no_of_vpath; i++) {
2034                 vpath = &vdev->vpaths[i];
2035                 vxge_assert(vpath->is_configured);
2036
2037                 if (!vdev->titan1) {
2038                         struct vxge_hw_vp_config *vcfg;
2039                         vcfg = &vdev->devh->config.vp_config[vpath->device_id];
2040
2041                         vcfg->rti.urange_a = RTI_T1A_RX_URANGE_A;
2042                         vcfg->rti.urange_b = RTI_T1A_RX_URANGE_B;
2043                         vcfg->rti.urange_c = RTI_T1A_RX_URANGE_C;
2044                         vcfg->tti.uec_a = TTI_T1A_TX_UFC_A;
2045                         vcfg->tti.uec_b = TTI_T1A_TX_UFC_B;
2046                         vcfg->tti.uec_c = TTI_T1A_TX_UFC_C(vdev->mtu);
2047                         vcfg->tti.uec_d = TTI_T1A_TX_UFC_D(vdev->mtu);
2048                         vcfg->tti.ltimer_val = VXGE_T1A_TTI_LTIMER_VAL;
2049                         vcfg->tti.rtimer_val = VXGE_T1A_TTI_RTIMER_VAL;
2050                 }
2051
2052                 attr.vp_id = vpath->device_id;
2053                 attr.fifo_attr.callback = vxge_xmit_compl;
2054                 attr.fifo_attr.txdl_term = vxge_tx_term;
2055                 attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv);
2056                 attr.fifo_attr.userdata = &vpath->fifo;
2057
2058                 attr.ring_attr.callback = vxge_rx_1b_compl;
2059                 attr.ring_attr.rxd_init = vxge_rx_initial_replenish;
2060                 attr.ring_attr.rxd_term = vxge_rx_term;
2061                 attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv);
2062                 attr.ring_attr.userdata = &vpath->ring;
2063
2064                 vpath->ring.ndev = vdev->ndev;
2065                 vpath->ring.pdev = vdev->pdev;
2066
2067                 status = vxge_hw_vpath_open(vdev->devh, &attr, &vpath->handle);
2068                 if (status == VXGE_HW_OK) {
2069                         vpath->fifo.handle =
2070                             (struct __vxge_hw_fifo *)attr.fifo_attr.userdata;
2071                         vpath->ring.handle =
2072                             (struct __vxge_hw_ring *)attr.ring_attr.userdata;
2073                         vpath->fifo.tx_steering_type =
2074                                 vdev->config.tx_steering_type;
2075                         vpath->fifo.ndev = vdev->ndev;
2076                         vpath->fifo.pdev = vdev->pdev;
2077
2078                         u64_stats_init(&vpath->fifo.stats.syncp);
2079                         u64_stats_init(&vpath->ring.stats.syncp);
2080
2081                         if (vdev->config.tx_steering_type)
2082                                 vpath->fifo.txq =
2083                                         netdev_get_tx_queue(vdev->ndev, i);
2084                         else
2085                                 vpath->fifo.txq =
2086                                         netdev_get_tx_queue(vdev->ndev, 0);
2087                         vpath->fifo.indicate_max_pkts =
2088                                 vdev->config.fifo_indicate_max_pkts;
2089                         vpath->fifo.tx_vector_no = 0;
2090                         vpath->ring.rx_vector_no = 0;
2091                         vpath->ring.rx_hwts = vdev->rx_hwts;
2092                         vpath->is_open = 1;
2093                         vdev->vp_handles[i] = vpath->handle;
2094                         vpath->ring.vlan_tag_strip = vdev->vlan_tag_strip;
2095                         vdev->stats.vpaths_open++;
2096                 } else {
2097                         vdev->stats.vpath_open_fail++;
2098                         vxge_debug_init(VXGE_ERR, "%s: vpath: %d failed to "
2099                                         "open with status: %d",
2100                                         vdev->ndev->name, vpath->device_id,
2101                                         status);
2102                         vxge_close_vpaths(vdev, 0);
2103                         return -EPERM;
2104                 }
2105
2106                 vp_id = vpath->handle->vpath->vp_id;
2107                 vdev->vpaths_deployed |= vxge_mBIT(vp_id);
2108         }
2109
2110         return VXGE_HW_OK;
2111 }
2112
2113 /**
2114  *  adaptive_coalesce_tx_interrupts - Changes the interrupt coalescing
2115  *  if the interrupts are not within a range
2116  *  @fifo: pointer to transmit fifo structure
2117  *  Description: The function changes boundary timer and restriction timer
2118  *  value depends on the traffic
2119  *  Return Value: None
2120  */
2121 static void adaptive_coalesce_tx_interrupts(struct vxge_fifo *fifo)
2122 {
2123         fifo->interrupt_count++;
2124         if (time_before(fifo->jiffies + HZ / 100, jiffies)) {
2125                 struct __vxge_hw_fifo *hw_fifo = fifo->handle;
2126
2127                 fifo->jiffies = jiffies;
2128                 if (fifo->interrupt_count > VXGE_T1A_MAX_TX_INTERRUPT_COUNT &&
2129                     hw_fifo->rtimer != VXGE_TTI_RTIMER_ADAPT_VAL) {
2130                         hw_fifo->rtimer = VXGE_TTI_RTIMER_ADAPT_VAL;
2131                         vxge_hw_vpath_dynamic_tti_rtimer_set(hw_fifo);
2132                 } else if (hw_fifo->rtimer != 0) {
2133                         hw_fifo->rtimer = 0;
2134                         vxge_hw_vpath_dynamic_tti_rtimer_set(hw_fifo);
2135                 }
2136                 fifo->interrupt_count = 0;
2137         }
2138 }
2139
2140 /**
2141  *  adaptive_coalesce_rx_interrupts - Changes the interrupt coalescing
2142  *  if the interrupts are not within a range
2143  *  @ring: pointer to receive ring structure
2144  *  Description: The function increases of decreases the packet counts within
2145  *  the ranges of traffic utilization, if the interrupts due to this ring are
2146  *  not within a fixed range.
2147  *  Return Value: Nothing
2148  */
2149 static void adaptive_coalesce_rx_interrupts(struct vxge_ring *ring)
2150 {
2151         ring->interrupt_count++;
2152         if (time_before(ring->jiffies + HZ / 100, jiffies)) {
2153                 struct __vxge_hw_ring *hw_ring = ring->handle;
2154
2155                 ring->jiffies = jiffies;
2156                 if (ring->interrupt_count > VXGE_T1A_MAX_INTERRUPT_COUNT &&
2157                     hw_ring->rtimer != VXGE_RTI_RTIMER_ADAPT_VAL) {
2158                         hw_ring->rtimer = VXGE_RTI_RTIMER_ADAPT_VAL;
2159                         vxge_hw_vpath_dynamic_rti_rtimer_set(hw_ring);
2160                 } else if (hw_ring->rtimer != 0) {
2161                         hw_ring->rtimer = 0;
2162                         vxge_hw_vpath_dynamic_rti_rtimer_set(hw_ring);
2163                 }
2164                 ring->interrupt_count = 0;
2165         }
2166 }
2167
2168 /*
2169  *  vxge_isr_napi
2170  *  @irq: the irq of the device.
2171  *  @dev_id: a void pointer to the hldev structure of the Titan device
2172  *  @ptregs: pointer to the registers pushed on the stack.
2173  *
2174  *  This function is the ISR handler of the device when napi is enabled. It
2175  *  identifies the reason for the interrupt and calls the relevant service
2176  *  routines.
2177  */
2178 static irqreturn_t vxge_isr_napi(int irq, void *dev_id)
2179 {
2180         struct net_device *dev;
2181         struct __vxge_hw_device *hldev;
2182         u64 reason;
2183         enum vxge_hw_status status;
2184         struct vxgedev *vdev = (struct vxgedev *)dev_id;
2185
2186         vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__);
2187
2188         dev = vdev->ndev;
2189         hldev = pci_get_drvdata(vdev->pdev);
2190
2191         if (pci_channel_offline(vdev->pdev))
2192                 return IRQ_NONE;
2193
2194         if (unlikely(!is_vxge_card_up(vdev)))
2195                 return IRQ_HANDLED;
2196
2197         status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode, &reason);
2198         if (status == VXGE_HW_OK) {
2199                 vxge_hw_device_mask_all(hldev);
2200
2201                 if (reason &
2202                         VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT(
2203                         vdev->vpaths_deployed >>
2204                         (64 - VXGE_HW_MAX_VIRTUAL_PATHS))) {
2205
2206                         vxge_hw_device_clear_tx_rx(hldev);
2207                         napi_schedule(&vdev->napi);
2208                         vxge_debug_intr(VXGE_TRACE,
2209                                 "%s:%d  Exiting...", __func__, __LINE__);
2210                         return IRQ_HANDLED;
2211                 } else
2212                         vxge_hw_device_unmask_all(hldev);
2213         } else if (unlikely((status == VXGE_HW_ERR_VPATH) ||
2214                 (status == VXGE_HW_ERR_CRITICAL) ||
2215                 (status == VXGE_HW_ERR_FIFO))) {
2216                 vxge_hw_device_mask_all(hldev);
2217                 vxge_hw_device_flush_io(hldev);
2218                 return IRQ_HANDLED;
2219         } else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE))
2220                 return IRQ_HANDLED;
2221
2222         vxge_debug_intr(VXGE_TRACE, "%s:%d  Exiting...", __func__, __LINE__);
2223         return IRQ_NONE;
2224 }
2225
2226 #ifdef CONFIG_PCI_MSI
2227
2228 static irqreturn_t vxge_tx_msix_handle(int irq, void *dev_id)
2229 {
2230         struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id;
2231
2232         adaptive_coalesce_tx_interrupts(fifo);
2233
2234         vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)fifo->handle,
2235                                   fifo->tx_vector_no);
2236
2237         vxge_hw_channel_msix_clear((struct __vxge_hw_channel *)fifo->handle,
2238                                    fifo->tx_vector_no);
2239
2240         VXGE_COMPLETE_VPATH_TX(fifo);
2241
2242         vxge_hw_channel_msix_unmask((struct __vxge_hw_channel *)fifo->handle,
2243                                     fifo->tx_vector_no);
2244
2245         mmiowb();
2246
2247         return IRQ_HANDLED;
2248 }
2249
2250 static irqreturn_t vxge_rx_msix_napi_handle(int irq, void *dev_id)
2251 {
2252         struct vxge_ring *ring = (struct vxge_ring *)dev_id;
2253
2254         adaptive_coalesce_rx_interrupts(ring);
2255
2256         vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle,
2257                                   ring->rx_vector_no);
2258
2259         vxge_hw_channel_msix_clear((struct __vxge_hw_channel *)ring->handle,
2260                                    ring->rx_vector_no);
2261
2262         napi_schedule(&ring->napi);
2263         return IRQ_HANDLED;
2264 }
2265
2266 static irqreturn_t
2267 vxge_alarm_msix_handle(int irq, void *dev_id)
2268 {
2269         int i;
2270         enum vxge_hw_status status;
2271         struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id;
2272         struct vxgedev *vdev = vpath->vdev;
2273         int msix_id = (vpath->handle->vpath->vp_id *
2274                 VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;
2275
2276         for (i = 0; i < vdev->no_of_vpath; i++) {
2277                 /* Reduce the chance of losing alarm interrupts by masking
2278                  * the vector. A pending bit will be set if an alarm is
2279                  * generated and on unmask the interrupt will be fired.
2280                  */
2281                 vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle, msix_id);
2282                 vxge_hw_vpath_msix_clear(vdev->vpaths[i].handle, msix_id);
2283                 mmiowb();
2284
2285                 status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle,
2286                         vdev->exec_mode);
2287                 if (status == VXGE_HW_OK) {
2288                         vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle,
2289                                                   msix_id);
2290                         mmiowb();
2291                         continue;
2292                 }
2293                 vxge_debug_intr(VXGE_ERR,
2294                         "%s: vxge_hw_vpath_alarm_process failed %x ",
2295                         VXGE_DRIVER_NAME, status);
2296         }
2297         return IRQ_HANDLED;
2298 }
2299
2300 static int vxge_alloc_msix(struct vxgedev *vdev)
2301 {
2302         int j, i, ret = 0;
2303         int msix_intr_vect = 0, temp;
2304         vdev->intr_cnt = 0;
2305
2306 start:
2307         /* Tx/Rx MSIX Vectors count */
2308         vdev->intr_cnt = vdev->no_of_vpath * 2;
2309
2310         /* Alarm MSIX Vectors count */
2311         vdev->intr_cnt++;
2312
2313         vdev->entries = kcalloc(vdev->intr_cnt, sizeof(struct msix_entry),
2314                                 GFP_KERNEL);
2315         if (!vdev->entries) {
2316                 vxge_debug_init(VXGE_ERR,
2317                         "%s: memory allocation failed",
2318                         VXGE_DRIVER_NAME);
2319                 ret = -ENOMEM;
2320                 goto alloc_entries_failed;
2321         }
2322
2323         vdev->vxge_entries = kcalloc(vdev->intr_cnt,
2324                                      sizeof(struct vxge_msix_entry),
2325                                      GFP_KERNEL);
2326         if (!vdev->vxge_entries) {
2327                 vxge_debug_init(VXGE_ERR, "%s: memory allocation failed",
2328                         VXGE_DRIVER_NAME);
2329                 ret = -ENOMEM;
2330                 goto alloc_vxge_entries_failed;
2331         }
2332
2333         for (i = 0, j = 0; i < vdev->no_of_vpath; i++) {
2334
2335                 msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE;
2336
2337                 /* Initialize the fifo vector */
2338                 vdev->entries[j].entry = msix_intr_vect;
2339                 vdev->vxge_entries[j].entry = msix_intr_vect;
2340                 vdev->vxge_entries[j].in_use = 0;
2341                 j++;
2342
2343                 /* Initialize the ring vector */
2344                 vdev->entries[j].entry = msix_intr_vect + 1;
2345                 vdev->vxge_entries[j].entry = msix_intr_vect + 1;
2346                 vdev->vxge_entries[j].in_use = 0;
2347                 j++;
2348         }
2349
2350         /* Initialize the alarm vector */
2351         vdev->entries[j].entry = VXGE_ALARM_MSIX_ID;
2352         vdev->vxge_entries[j].entry = VXGE_ALARM_MSIX_ID;
2353         vdev->vxge_entries[j].in_use = 0;
2354
2355         ret = pci_enable_msix_range(vdev->pdev,
2356                                     vdev->entries, 3, vdev->intr_cnt);
2357         if (ret < 0) {
2358                 ret = -ENODEV;
2359                 goto enable_msix_failed;
2360         } else if (ret < vdev->intr_cnt) {
2361                 pci_disable_msix(vdev->pdev);
2362
2363                 vxge_debug_init(VXGE_ERR,
2364                         "%s: MSI-X enable failed for %d vectors, ret: %d",
2365                         VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
2366                 if (max_config_vpath != VXGE_USE_DEFAULT) {
2367                         ret = -ENODEV;
2368                         goto enable_msix_failed;
2369                 }
2370
2371                 kfree(vdev->entries);
2372                 kfree(vdev->vxge_entries);
2373                 vdev->entries = NULL;
2374                 vdev->vxge_entries = NULL;
2375                 /* Try with less no of vector by reducing no of vpaths count */
2376                 temp = (ret - 1)/2;
2377                 vxge_close_vpaths(vdev, temp);
2378                 vdev->no_of_vpath = temp;
2379                 goto start;
2380         }
2381         return 0;
2382
2383 enable_msix_failed:
2384         kfree(vdev->vxge_entries);
2385 alloc_vxge_entries_failed:
2386         kfree(vdev->entries);
2387 alloc_entries_failed:
2388         return ret;
2389 }
2390
2391 static int vxge_enable_msix(struct vxgedev *vdev)
2392 {
2393
2394         int i, ret = 0;
2395         /* 0 - Tx, 1 - Rx  */
2396         int tim_msix_id[4] = {0, 1, 0, 0};
2397
2398         vdev->intr_cnt = 0;
2399
2400         /* allocate msix vectors */
2401         ret = vxge_alloc_msix(vdev);
2402         if (!ret) {
2403                 for (i = 0; i < vdev->no_of_vpath; i++) {
2404                         struct vxge_vpath *vpath = &vdev->vpaths[i];
2405
2406                         /* If fifo or ring are not enabled, the MSIX vector for
2407                          * it should be set to 0.
2408                          */
2409                         vpath->ring.rx_vector_no = (vpath->device_id *
2410                                                 VXGE_HW_VPATH_MSIX_ACTIVE) + 1;
2411
2412                         vpath->fifo.tx_vector_no = (vpath->device_id *
2413                                                 VXGE_HW_VPATH_MSIX_ACTIVE);
2414
2415                         vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id,
2416                                                VXGE_ALARM_MSIX_ID);
2417                 }
2418         }
2419
2420         return ret;
2421 }
2422
2423 static void vxge_rem_msix_isr(struct vxgedev *vdev)
2424 {
2425         int intr_cnt;
2426
2427         for (intr_cnt = 0; intr_cnt < (vdev->no_of_vpath * 2 + 1);
2428                 intr_cnt++) {
2429                 if (vdev->vxge_entries[intr_cnt].in_use) {
2430                         synchronize_irq(vdev->entries[intr_cnt].vector);
2431                         free_irq(vdev->entries[intr_cnt].vector,
2432                                 vdev->vxge_entries[intr_cnt].arg);
2433                         vdev->vxge_entries[intr_cnt].in_use = 0;
2434                 }
2435         }
2436
2437         kfree(vdev->entries);
2438         kfree(vdev->vxge_entries);
2439         vdev->entries = NULL;
2440         vdev->vxge_entries = NULL;
2441
2442         if (vdev->config.intr_type == MSI_X)
2443                 pci_disable_msix(vdev->pdev);
2444 }
2445 #endif
2446
2447 static void vxge_rem_isr(struct vxgedev *vdev)
2448 {
2449 #ifdef CONFIG_PCI_MSI
2450         if (vdev->config.intr_type == MSI_X) {
2451                 vxge_rem_msix_isr(vdev);
2452         } else
2453 #endif
2454         if (vdev->config.intr_type == INTA) {
2455                         synchronize_irq(vdev->pdev->irq);
2456                         free_irq(vdev->pdev->irq, vdev);
2457         }
2458 }
2459
2460 static int vxge_add_isr(struct vxgedev *vdev)
2461 {
2462         int ret = 0;
2463 #ifdef CONFIG_PCI_MSI
2464         int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0;
2465         int pci_fun = PCI_FUNC(vdev->pdev->devfn);
2466
2467         if (vdev->config.intr_type == MSI_X)
2468                 ret = vxge_enable_msix(vdev);
2469
2470         if (ret) {
2471                 vxge_debug_init(VXGE_ERR,
2472                         "%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME);
2473                 vxge_debug_init(VXGE_ERR,
2474                         "%s: Defaulting to INTA", VXGE_DRIVER_NAME);
2475                 vdev->config.intr_type = INTA;
2476         }
2477
2478         if (vdev->config.intr_type == MSI_X) {
2479                 for (intr_idx = 0;
2480                      intr_idx < (vdev->no_of_vpath *
2481                         VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) {
2482
2483                         msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE;
2484                         irq_req = 0;
2485
2486                         switch (msix_idx) {
2487                         case 0:
2488                                 snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
2489                                 "%s:vxge:MSI-X %d - Tx - fn:%d vpath:%d",
2490                                         vdev->ndev->name,
2491                                         vdev->entries[intr_cnt].entry,
2492                                         pci_fun, vp_idx);
2493                                 ret = request_irq(
2494                                     vdev->entries[intr_cnt].vector,
2495                                         vxge_tx_msix_handle, 0,
2496                                         vdev->desc[intr_cnt],
2497                                         &vdev->vpaths[vp_idx].fifo);
2498                                         vdev->vxge_entries[intr_cnt].arg =
2499                                                 &vdev->vpaths[vp_idx].fifo;
2500                                 irq_req = 1;
2501                                 break;
2502                         case 1:
2503                                 snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
2504                                 "%s:vxge:MSI-X %d - Rx - fn:%d vpath:%d",
2505                                         vdev->ndev->name,
2506                                         vdev->entries[intr_cnt].entry,
2507                                         pci_fun, vp_idx);
2508                                 ret = request_irq(
2509                                     vdev->entries[intr_cnt].vector,
2510                                         vxge_rx_msix_napi_handle,
2511                                         0,
2512                                         vdev->desc[intr_cnt],
2513                                         &vdev->vpaths[vp_idx].ring);
2514                                         vdev->vxge_entries[intr_cnt].arg =
2515                                                 &vdev->vpaths[vp_idx].ring;
2516                                 irq_req = 1;
2517                                 break;
2518                         }
2519
2520                         if (ret) {
2521                                 vxge_debug_init(VXGE_ERR,
2522                                         "%s: MSIX - %d  Registration failed",
2523                                         vdev->ndev->name, intr_cnt);
2524                                 vxge_rem_msix_isr(vdev);
2525                                 vdev->config.intr_type = INTA;
2526                                 vxge_debug_init(VXGE_ERR,
2527                                         "%s: Defaulting to INTA"
2528                                         , vdev->ndev->name);
2529                                         goto INTA_MODE;
2530                         }
2531
2532                         if (irq_req) {
2533                                 /* We requested for this msix interrupt */
2534                                 vdev->vxge_entries[intr_cnt].in_use = 1;
2535                                 msix_idx +=  vdev->vpaths[vp_idx].device_id *
2536                                         VXGE_HW_VPATH_MSIX_ACTIVE;
2537                                 vxge_hw_vpath_msix_unmask(
2538                                         vdev->vpaths[vp_idx].handle,
2539                                         msix_idx);
2540                                 intr_cnt++;
2541                         }
2542
2543                         /* Point to next vpath handler */
2544                         if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) &&
2545                             (vp_idx < (vdev->no_of_vpath - 1)))
2546                                 vp_idx++;
2547                 }
2548
2549                 intr_cnt = vdev->no_of_vpath * 2;
2550                 snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
2551                         "%s:vxge:MSI-X %d - Alarm - fn:%d",
2552                         vdev->ndev->name,
2553                         vdev->entries[intr_cnt].entry,
2554                         pci_fun);
2555                 /* For Alarm interrupts */
2556                 ret = request_irq(vdev->entries[intr_cnt].vector,
2557                                         vxge_alarm_msix_handle, 0,
2558                                         vdev->desc[intr_cnt],
2559                                         &vdev->vpaths[0]);
2560                 if (ret) {
2561                         vxge_debug_init(VXGE_ERR,
2562                                 "%s: MSIX - %d Registration failed",
2563                                 vdev->ndev->name, intr_cnt);
2564                         vxge_rem_msix_isr(vdev);
2565                         vdev->config.intr_type = INTA;
2566                         vxge_debug_init(VXGE_ERR,
2567                                 "%s: Defaulting to INTA",
2568                                 vdev->ndev->name);
2569                                 goto INTA_MODE;
2570                 }
2571
2572                 msix_idx = (vdev->vpaths[0].handle->vpath->vp_id *
2573                         VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;
2574                 vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle,
2575                                         msix_idx);
2576                 vdev->vxge_entries[intr_cnt].in_use = 1;
2577                 vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[0];
2578         }
2579 INTA_MODE:
2580 #endif
2581
2582         if (vdev->config.intr_type == INTA) {
2583                 snprintf(vdev->desc[0], VXGE_INTR_STRLEN,
2584                         "%s:vxge:INTA", vdev->ndev->name);
2585                 vxge_hw_device_set_intr_type(vdev->devh,
2586                         VXGE_HW_INTR_MODE_IRQLINE);
2587
2588                 vxge_hw_vpath_tti_ci_set(vdev->vpaths[0].fifo.handle);
2589
2590                 ret = request_irq((int) vdev->pdev->irq,
2591                         vxge_isr_napi,
2592                         IRQF_SHARED, vdev->desc[0], vdev);
2593                 if (ret) {
2594                         vxge_debug_init(VXGE_ERR,
2595                                 "%s %s-%d: ISR registration failed",
2596                                 VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq);
2597                         return -ENODEV;
2598                 }
2599                 vxge_debug_init(VXGE_TRACE,
2600                         "new %s-%d line allocated",
2601                         "IRQ", vdev->pdev->irq);
2602         }
2603
2604         return VXGE_HW_OK;
2605 }
2606
2607 static void vxge_poll_vp_reset(unsigned long data)
2608 {
2609         struct vxgedev *vdev = (struct vxgedev *)data;
2610         int i, j = 0;
2611
2612         for (i = 0; i < vdev->no_of_vpath; i++) {
2613                 if (test_bit(i, &vdev->vp_reset)) {
2614                         vxge_reset_vpath(vdev, i);
2615                         j++;
2616                 }
2617         }
2618         if (j && (vdev->config.intr_type != MSI_X)) {
2619                 vxge_hw_device_unmask_all(vdev->devh);
2620                 vxge_hw_device_flush_io(vdev->devh);
2621         }
2622
2623         mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2);
2624 }
2625
2626 static void vxge_poll_vp_lockup(unsigned long data)
2627 {
2628         struct vxgedev *vdev = (struct vxgedev *)data;
2629         enum vxge_hw_status status = VXGE_HW_OK;
2630         struct vxge_vpath *vpath;
2631         struct vxge_ring *ring;
2632         int i;
2633         unsigned long rx_frms;
2634
2635         for (i = 0; i < vdev->no_of_vpath; i++) {
2636                 ring = &vdev->vpaths[i].ring;
2637
2638                 /* Truncated to machine word size number of frames */
2639                 rx_frms = ACCESS_ONCE(ring->stats.rx_frms);
2640
2641                 /* Did this vpath received any packets */
2642                 if (ring->stats.prev_rx_frms == rx_frms) {
2643                         status = vxge_hw_vpath_check_leak(ring->handle);
2644
2645                         /* Did it received any packets last time */
2646                         if ((VXGE_HW_FAIL == status) &&
2647                                 (VXGE_HW_FAIL == ring->last_status)) {
2648
2649                                 /* schedule vpath reset */
2650                                 if (!test_and_set_bit(i, &vdev->vp_reset)) {
2651                                         vpath = &vdev->vpaths[i];
2652
2653                                         /* disable interrupts for this vpath */
2654                                         vxge_vpath_intr_disable(vdev, i);
2655
2656                                         /* stop the queue for this vpath */
2657                                         netif_tx_stop_queue(vpath->fifo.txq);
2658                                         continue;
2659                                 }
2660                         }
2661                 }
2662                 ring->stats.prev_rx_frms = rx_frms;
2663                 ring->last_status = status;
2664         }
2665
2666         /* Check every 1 milli second */
2667         mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000);
2668 }
2669
2670 static netdev_features_t vxge_fix_features(struct net_device *dev,
2671         netdev_features_t features)
2672 {
2673         netdev_features_t changed = dev->features ^ features;
2674
2675         /* Enabling RTH requires some of the logic in vxge_device_register and a
2676          * vpath reset.  Due to these restrictions, only allow modification
2677          * while the interface is down.
2678          */
2679         if ((changed & NETIF_F_RXHASH) && netif_running(dev))
2680                 features ^= NETIF_F_RXHASH;
2681
2682         return features;
2683 }
2684
2685 static int vxge_set_features(struct net_device *dev, netdev_features_t features)
2686 {
2687         struct vxgedev *vdev = netdev_priv(dev);
2688         netdev_features_t changed = dev->features ^ features;
2689
2690         if (!(changed & NETIF_F_RXHASH))
2691                 return 0;
2692
2693         /* !netif_running() ensured by vxge_fix_features() */
2694
2695         vdev->devh->config.rth_en = !!(features & NETIF_F_RXHASH);
2696         if (vxge_reset_all_vpaths(vdev) != VXGE_HW_OK) {
2697                 dev->features = features ^ NETIF_F_RXHASH;
2698                 vdev->devh->config.rth_en = !!(dev->features & NETIF_F_RXHASH);
2699                 return -EIO;
2700         }
2701
2702         return 0;
2703 }
2704
2705 /**
2706  * vxge_open
2707  * @dev: pointer to the device structure.
2708  *
2709  * This function is the open entry point of the driver. It mainly calls a
2710  * function to allocate Rx buffers and inserts them into the buffer
2711  * descriptors and then enables the Rx part of the NIC.
2712  * Return value: '0' on success and an appropriate (-)ve integer as
2713  * defined in errno.h file on failure.
2714  */
2715 static int vxge_open(struct net_device *dev)
2716 {
2717         enum vxge_hw_status status;
2718         struct vxgedev *vdev;
2719         struct __vxge_hw_device *hldev;
2720         struct vxge_vpath *vpath;
2721         int ret = 0;
2722         int i;
2723         u64 val64, function_mode;
2724
2725         vxge_debug_entryexit(VXGE_TRACE,
2726                 "%s: %s:%d", dev->name, __func__, __LINE__);
2727
2728         vdev = netdev_priv(dev);
2729         hldev = pci_get_drvdata(vdev->pdev);
2730         function_mode = vdev->config.device_hw_info.function_mode;
2731
2732         /* make sure you have link off by default every time Nic is
2733          * initialized */
2734         netif_carrier_off(dev);
2735
2736         /* Open VPATHs */
2737         status = vxge_open_vpaths(vdev);
2738         if (status != VXGE_HW_OK) {
2739                 vxge_debug_init(VXGE_ERR,
2740                         "%s: fatal: Vpath open failed", vdev->ndev->name);
2741                 ret = -EPERM;
2742                 goto out0;
2743         }
2744
2745         vdev->mtu = dev->mtu;
2746
2747         status = vxge_add_isr(vdev);
2748         if (status != VXGE_HW_OK) {
2749                 vxge_debug_init(VXGE_ERR,
2750                         "%s: fatal: ISR add failed", dev->name);
2751                 ret = -EPERM;
2752                 goto out1;
2753         }
2754
2755         if (vdev->config.intr_type != MSI_X) {
2756                 netif_napi_add(dev, &vdev->napi, vxge_poll_inta,
2757                         vdev->config.napi_weight);
2758                 napi_enable(&vdev->napi);
2759                 for (i = 0; i < vdev->no_of_vpath; i++) {
2760                         vpath = &vdev->vpaths[i];
2761                         vpath->ring.napi_p = &vdev->napi;
2762                 }
2763         } else {
2764                 for (i = 0; i < vdev->no_of_vpath; i++) {
2765                         vpath = &vdev->vpaths[i];
2766                         netif_napi_add(dev, &vpath->ring.napi,
2767                             vxge_poll_msix, vdev->config.napi_weight);
2768                         napi_enable(&vpath->ring.napi);
2769                         vpath->ring.napi_p = &vpath->ring.napi;
2770                 }
2771         }
2772
2773         /* configure RTH */
2774         if (vdev->config.rth_steering) {
2775                 status = vxge_rth_configure(vdev);
2776                 if (status != VXGE_HW_OK) {
2777                         vxge_debug_init(VXGE_ERR,
2778                                 "%s: fatal: RTH configuration failed",
2779                                 dev->name);
2780                         ret = -EPERM;
2781                         goto out2;
2782                 }
2783         }
2784         printk(KERN_INFO "%s: Receive Hashing Offload %s\n", dev->name,
2785                hldev->config.rth_en ? "enabled" : "disabled");
2786
2787         for (i = 0; i < vdev->no_of_vpath; i++) {
2788                 vpath = &vdev->vpaths[i];
2789
2790                 /* set initial mtu before enabling the device */
2791                 status = vxge_hw_vpath_mtu_set(vpath->handle, vdev->mtu);
2792                 if (status != VXGE_HW_OK) {
2793                         vxge_debug_init(VXGE_ERR,
2794                                 "%s: fatal: can not set new MTU", dev->name);
2795                         ret = -EPERM;
2796                         goto out2;
2797                 }
2798         }
2799
2800         VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev);
2801         vxge_debug_init(vdev->level_trace,
2802                 "%s: MTU is %d", vdev->ndev->name, vdev->mtu);
2803         VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev);
2804
2805         /* Restore the DA, VID table and also multicast and promiscuous mode
2806          * states
2807          */
2808         if (vdev->all_multi_flg) {
2809                 for (i = 0; i < vdev->no_of_vpath; i++) {
2810                         vpath = &vdev->vpaths[i];
2811                         vxge_restore_vpath_mac_addr(vpath);
2812                         vxge_restore_vpath_vid_table(vpath);
2813
2814                         status = vxge_hw_vpath_mcast_enable(vpath->handle);
2815                         if (status != VXGE_HW_OK)
2816                                 vxge_debug_init(VXGE_ERR,
2817                                         "%s:%d Enabling multicast failed",
2818                                         __func__, __LINE__);
2819                 }
2820         }
2821
2822         /* Enable vpath to sniff all unicast/multicast traffic that not
2823          * addressed to them. We allow promiscuous mode for PF only
2824          */
2825
2826         val64 = 0;
2827         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
2828                 val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i);
2829
2830         vxge_hw_mgmt_reg_write(vdev->devh,
2831                 vxge_hw_mgmt_reg_type_mrpcim,
2832                 0,
2833                 (ulong)offsetof(struct vxge_hw_mrpcim_reg,
2834                         rxmac_authorize_all_addr),
2835                 val64);
2836
2837         vxge_hw_mgmt_reg_write(vdev->devh,
2838                 vxge_hw_mgmt_reg_type_mrpcim,
2839                 0,
2840                 (ulong)offsetof(struct vxge_hw_mrpcim_reg,
2841                         rxmac_authorize_all_vid),
2842                 val64);
2843
2844         vxge_set_multicast(dev);
2845
2846         /* Enabling Bcast and mcast for all vpath */
2847         for (i = 0; i < vdev->no_of_vpath; i++) {
2848                 vpath = &vdev->vpaths[i];
2849                 status = vxge_hw_vpath_bcast_enable(vpath->handle);
2850                 if (status != VXGE_HW_OK)
2851                         vxge_debug_init(VXGE_ERR,
2852                                 "%s : Can not enable bcast for vpath "
2853                                 "id %d", dev->name, i);
2854                 if (vdev->config.addr_learn_en) {
2855                         status = vxge_hw_vpath_mcast_enable(vpath->handle);
2856                         if (status != VXGE_HW_OK)
2857                                 vxge_debug_init(VXGE_ERR,
2858                                         "%s : Can not enable mcast for vpath "
2859                                         "id %d", dev->name, i);
2860                 }
2861         }
2862
2863         vxge_hw_device_setpause_data(vdev->devh, 0,
2864                 vdev->config.tx_pause_enable,
2865                 vdev->config.rx_pause_enable);
2866
2867         if (vdev->vp_reset_timer.function == NULL)
2868                 vxge_os_timer(&vdev->vp_reset_timer, vxge_poll_vp_reset, vdev,
2869                               HZ / 2);
2870
2871         /* There is no need to check for RxD leak and RxD lookup on Titan1A */
2872         if (vdev->titan1 && vdev->vp_lockup_timer.function == NULL)
2873                 vxge_os_timer(&vdev->vp_lockup_timer, vxge_poll_vp_lockup, vdev,
2874                               HZ / 2);
2875
2876         set_bit(__VXGE_STATE_CARD_UP, &vdev->state);
2877
2878         smp_wmb();
2879
2880         if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) {
2881                 netif_carrier_on(vdev->ndev);
2882                 netdev_notice(vdev->ndev, "Link Up\n");
2883                 vdev->stats.link_up++;
2884         }
2885
2886         vxge_hw_device_intr_enable(vdev->devh);
2887
2888         smp_wmb();
2889
2890         for (i = 0; i < vdev->no_of_vpath; i++) {
2891                 vpath = &vdev->vpaths[i];
2892
2893                 vxge_hw_vpath_enable(vpath->handle);
2894                 smp_wmb();
2895                 vxge_hw_vpath_rx_doorbell_init(vpath->handle);
2896         }
2897
2898         netif_tx_start_all_queues(vdev->ndev);
2899
2900         /* configure CI */
2901         vxge_config_ci_for_tti_rti(vdev);
2902
2903         goto out0;
2904
2905 out2:
2906         vxge_rem_isr(vdev);
2907
2908         /* Disable napi */
2909         if (vdev->config.intr_type != MSI_X)
2910                 napi_disable(&vdev->napi);
2911         else {
2912                 for (i = 0; i < vdev->no_of_vpath; i++)
2913                         napi_disable(&vdev->vpaths[i].ring.napi);
2914         }
2915
2916 out1:
2917         vxge_close_vpaths(vdev, 0);
2918 out0:
2919         vxge_debug_entryexit(VXGE_TRACE,
2920                                 "%s: %s:%d  Exiting...",
2921                                 dev->name, __func__, __LINE__);
2922         return ret;
2923 }
2924
2925 /* Loop through the mac address list and delete all the entries */
2926 static void vxge_free_mac_add_list(struct vxge_vpath *vpath)
2927 {
2928
2929         struct list_head *entry, *next;
2930         if (list_empty(&vpath->mac_addr_list))
2931                 return;
2932
2933         list_for_each_safe(entry, next, &vpath->mac_addr_list) {
2934                 list_del(entry);
2935                 kfree((struct vxge_mac_addrs *)entry);
2936         }
2937 }
2938
2939 static void vxge_napi_del_all(struct vxgedev *vdev)
2940 {
2941         int i;
2942         if (vdev->config.intr_type != MSI_X)
2943                 netif_napi_del(&vdev->napi);
2944         else {
2945                 for (i = 0; i < vdev->no_of_vpath; i++)
2946                         netif_napi_del(&vdev->vpaths[i].ring.napi);
2947         }
2948 }
2949
2950 static int do_vxge_close(struct net_device *dev, int do_io)
2951 {
2952         enum vxge_hw_status status;
2953         struct vxgedev *vdev;
2954         struct __vxge_hw_device *hldev;
2955         int i;
2956         u64 val64, vpath_vector;
2957         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
2958                 dev->name, __func__, __LINE__);
2959
2960         vdev = netdev_priv(dev);
2961         hldev = pci_get_drvdata(vdev->pdev);
2962
2963         if (unlikely(!is_vxge_card_up(vdev)))
2964                 return 0;
2965
2966         /* If vxge_handle_crit_err task is executing,
2967          * wait till it completes. */
2968         while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
2969                 msleep(50);
2970
2971         if (do_io) {
2972                 /* Put the vpath back in normal mode */
2973                 vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id);
2974                 status = vxge_hw_mgmt_reg_read(vdev->devh,
2975                                 vxge_hw_mgmt_reg_type_mrpcim,
2976                                 0,
2977                                 (ulong)offsetof(
2978                                         struct vxge_hw_mrpcim_reg,
2979                                         rts_mgr_cbasin_cfg),
2980                                 &val64);
2981                 if (status == VXGE_HW_OK) {
2982                         val64 &= ~vpath_vector;
2983                         status = vxge_hw_mgmt_reg_write(vdev->devh,
2984                                         vxge_hw_mgmt_reg_type_mrpcim,
2985                                         0,
2986                                         (ulong)offsetof(
2987                                                 struct vxge_hw_mrpcim_reg,
2988                                                 rts_mgr_cbasin_cfg),
2989                                         val64);
2990                 }
2991
2992                 /* Remove the function 0 from promiscuous mode */
2993                 vxge_hw_mgmt_reg_write(vdev->devh,
2994                         vxge_hw_mgmt_reg_type_mrpcim,
2995                         0,
2996                         (ulong)offsetof(struct vxge_hw_mrpcim_reg,
2997                                 rxmac_authorize_all_addr),
2998                         0);
2999
3000                 vxge_hw_mgmt_reg_write(vdev->devh,
3001                         vxge_hw_mgmt_reg_type_mrpcim,
3002                         0,
3003                         (ulong)offsetof(struct vxge_hw_mrpcim_reg,
3004                                 rxmac_authorize_all_vid),
3005                         0);
3006
3007                 smp_wmb();
3008         }
3009
3010         if (vdev->titan1)
3011                 del_timer_sync(&vdev->vp_lockup_timer);
3012
3013         del_timer_sync(&vdev->vp_reset_timer);
3014
3015         if (do_io)
3016                 vxge_hw_device_wait_receive_idle(hldev);
3017
3018         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
3019
3020         /* Disable napi */
3021         if (vdev->config.intr_type != MSI_X)
3022                 napi_disable(&vdev->napi);
3023         else {
3024                 for (i = 0; i < vdev->no_of_vpath; i++)
3025                         napi_disable(&vdev->vpaths[i].ring.napi);
3026         }
3027
3028         netif_carrier_off(vdev->ndev);
3029         netdev_notice(vdev->ndev, "Link Down\n");
3030         netif_tx_stop_all_queues(vdev->ndev);
3031
3032         /* Note that at this point xmit() is stopped by upper layer */
3033         if (do_io)
3034                 vxge_hw_device_intr_disable(vdev->devh);
3035
3036         vxge_rem_isr(vdev);
3037
3038         vxge_napi_del_all(vdev);
3039
3040         if (do_io)
3041                 vxge_reset_all_vpaths(vdev);
3042
3043         vxge_close_vpaths(vdev, 0);
3044
3045         vxge_debug_entryexit(VXGE_TRACE,
3046                 "%s: %s:%d  Exiting...", dev->name, __func__, __LINE__);
3047
3048         clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state);
3049
3050         return 0;
3051 }
3052
3053 /**
3054  * vxge_close
3055  * @dev: device pointer.
3056  *
3057  * This is the stop entry point of the driver. It needs to undo exactly
3058  * whatever was done by the open entry point, thus it's usually referred to
3059  * as the close function.Among other things this function mainly stops the
3060  * Rx side of the NIC and frees all the Rx buffers in the Rx rings.
3061  * Return value: '0' on success and an appropriate (-)ve integer as
3062  * defined in errno.h file on failure.
3063  */
3064 static int vxge_close(struct net_device *dev)
3065 {
3066         do_vxge_close(dev, 1);
3067         return 0;
3068 }
3069
3070 /**
3071  * vxge_change_mtu
3072  * @dev: net device pointer.
3073  * @new_mtu :the new MTU size for the device.
3074  *
3075  * A driver entry point to change MTU size for the device. Before changing
3076  * the MTU the device must be stopped.
3077  */
3078 static int vxge_change_mtu(struct net_device *dev, int new_mtu)
3079 {
3080         struct vxgedev *vdev = netdev_priv(dev);
3081
3082         vxge_debug_entryexit(vdev->level_trace,
3083                 "%s:%d", __func__, __LINE__);
3084         if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) {
3085                 vxge_debug_init(vdev->level_err,
3086                         "%s: mtu size is invalid", dev->name);
3087                 return -EPERM;
3088         }
3089
3090         /* check if device is down already */
3091         if (unlikely(!is_vxge_card_up(vdev))) {
3092                 /* just store new value, will use later on open() */
3093                 dev->mtu = new_mtu;
3094                 vxge_debug_init(vdev->level_err,
3095                         "%s", "device is down on MTU change");
3096                 return 0;
3097         }
3098
3099         vxge_debug_init(vdev->level_trace,
3100                 "trying to apply new MTU %d", new_mtu);
3101
3102         if (vxge_close(dev))
3103                 return -EIO;
3104
3105         dev->mtu = new_mtu;
3106         vdev->mtu = new_mtu;
3107
3108         if (vxge_open(dev))
3109                 return -EIO;
3110
3111         vxge_debug_init(vdev->level_trace,
3112                 "%s: MTU changed to %d", vdev->ndev->name, new_mtu);
3113
3114         vxge_debug_entryexit(vdev->level_trace,
3115                 "%s:%d  Exiting...", __func__, __LINE__);
3116
3117         return 0;
3118 }
3119
3120 /**
3121  * vxge_get_stats64
3122  * @dev: pointer to the device structure
3123  * @stats: pointer to struct rtnl_link_stats64
3124  *
3125  */
3126 static struct rtnl_link_stats64 *
3127 vxge_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *net_stats)
3128 {
3129         struct vxgedev *vdev = netdev_priv(dev);
3130         int k;
3131
3132         /* net_stats already zeroed by caller */
3133         for (k = 0; k < vdev->no_of_vpath; k++) {
3134                 struct vxge_ring_stats *rxstats = &vdev->vpaths[k].ring.stats;
3135                 struct vxge_fifo_stats *txstats = &vdev->vpaths[k].fifo.stats;
3136                 unsigned int start;
3137                 u64 packets, bytes, multicast;
3138
3139                 do {
3140                         start = u64_stats_fetch_begin_irq(&rxstats->syncp);
3141
3142                         packets   = rxstats->rx_frms;
3143                         multicast = rxstats->rx_mcast;
3144                         bytes     = rxstats->rx_bytes;
3145                 } while (u64_stats_fetch_retry_irq(&rxstats->syncp, start));
3146
3147                 net_stats->rx_packets += packets;
3148                 net_stats->rx_bytes += bytes;
3149                 net_stats->multicast += multicast;
3150
3151                 net_stats->rx_errors += rxstats->rx_errors;
3152                 net_stats->rx_dropped += rxstats->rx_dropped;
3153
3154                 do {
3155                         start = u64_stats_fetch_begin_irq(&txstats->syncp);
3156
3157                         packets = txstats->tx_frms;
3158                         bytes   = txstats->tx_bytes;
3159                 } while (u64_stats_fetch_retry_irq(&txstats->syncp, start));
3160
3161                 net_stats->tx_packets += packets;
3162                 net_stats->tx_bytes += bytes;
3163                 net_stats->tx_errors += txstats->tx_errors;
3164         }
3165
3166         return net_stats;
3167 }
3168
3169 static enum vxge_hw_status vxge_timestamp_config(struct __vxge_hw_device *devh)
3170 {
3171         enum vxge_hw_status status;
3172         u64 val64;
3173
3174         /* Timestamp is passed to the driver via the FCS, therefore we
3175          * must disable the FCS stripping by the adapter.  Since this is
3176          * required for the driver to load (due to a hardware bug),
3177          * there is no need to do anything special here.
3178          */
3179         val64 = VXGE_HW_XMAC_TIMESTAMP_EN |
3180                 VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) |
3181                 VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0);
3182
3183         status = vxge_hw_mgmt_reg_write(devh,
3184                                         vxge_hw_mgmt_reg_type_mrpcim,
3185                                         0,
3186                                         offsetof(struct vxge_hw_mrpcim_reg,
3187                                                  xmac_timestamp),
3188                                         val64);
3189         vxge_hw_device_flush_io(devh);
3190         devh->config.hwts_en = VXGE_HW_HWTS_ENABLE;
3191         return status;
3192 }
3193
3194 static int vxge_hwtstamp_set(struct vxgedev *vdev, void __user *data)
3195 {
3196         struct hwtstamp_config config;
3197         int i;
3198
3199         if (copy_from_user(&config, data, sizeof(config)))
3200                 return -EFAULT;
3201
3202         /* reserved for future extensions */
3203         if (config.flags)
3204                 return -EINVAL;
3205
3206         /* Transmit HW Timestamp not supported */
3207         switch (config.tx_type) {
3208         case HWTSTAMP_TX_OFF:
3209                 break;
3210         case HWTSTAMP_TX_ON:
3211         default:
3212                 return -ERANGE;
3213         }
3214
3215         switch (config.rx_filter) {
3216         case HWTSTAMP_FILTER_NONE:
3217                 vdev->rx_hwts = 0;
3218                 config.rx_filter = HWTSTAMP_FILTER_NONE;
3219                 break;
3220
3221         case HWTSTAMP_FILTER_ALL:
3222         case HWTSTAMP_FILTER_SOME:
3223         case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
3224         case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
3225         case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
3226         case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
3227         case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
3228         case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
3229         case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
3230         case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
3231         case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
3232         case HWTSTAMP_FILTER_PTP_V2_EVENT:
3233         case HWTSTAMP_FILTER_PTP_V2_SYNC:
3234         case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
3235                 if (vdev->devh->config.hwts_en != VXGE_HW_HWTS_ENABLE)
3236                         return -EFAULT;
3237
3238                 vdev->rx_hwts = 1;
3239                 config.rx_filter = HWTSTAMP_FILTER_ALL;
3240                 break;
3241
3242         default:
3243                  return -ERANGE;
3244         }
3245
3246         for (i = 0; i < vdev->no_of_vpath; i++)
3247                 vdev->vpaths[i].ring.rx_hwts = vdev->rx_hwts;
3248
3249         if (copy_to_user(data, &config, sizeof(config)))
3250                 return -EFAULT;
3251
3252         return 0;
3253 }
3254
3255 static int vxge_hwtstamp_get(struct vxgedev *vdev, void __user *data)
3256 {
3257         struct hwtstamp_config config;
3258
3259         config.flags = 0;
3260         config.tx_type = HWTSTAMP_TX_OFF;
3261         config.rx_filter = (vdev->rx_hwts ?
3262                             HWTSTAMP_FILTER_ALL : HWTSTAMP_FILTER_NONE);
3263
3264         if (copy_to_user(data, &config, sizeof(config)))
3265                 return -EFAULT;
3266
3267         return 0;
3268 }
3269
3270 /**
3271  * vxge_ioctl
3272  * @dev: Device pointer.
3273  * @ifr: An IOCTL specific structure, that can contain a pointer to
3274  *       a proprietary structure used to pass information to the driver.
3275  * @cmd: This is used to distinguish between the different commands that
3276  *       can be passed to the IOCTL functions.
3277  *
3278  * Entry point for the Ioctl.
3279  */
3280 static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
3281 {
3282         struct vxgedev *vdev = netdev_priv(dev);
3283
3284         switch (cmd) {
3285         case SIOCSHWTSTAMP:
3286                 return vxge_hwtstamp_set(vdev, rq->ifr_data);
3287         case SIOCGHWTSTAMP:
3288                 return vxge_hwtstamp_get(vdev, rq->ifr_data);
3289         default:
3290                 return -EOPNOTSUPP;
3291         }
3292 }
3293
3294 /**
3295  * vxge_tx_watchdog
3296  * @dev: pointer to net device structure
3297  *
3298  * Watchdog for transmit side.
3299  * This function is triggered if the Tx Queue is stopped
3300  * for a pre-defined amount of time when the Interface is still up.
3301  */
3302 static void vxge_tx_watchdog(struct net_device *dev)
3303 {
3304         struct vxgedev *vdev;
3305
3306         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
3307
3308         vdev = netdev_priv(dev);
3309
3310         vdev->cric_err_event = VXGE_HW_EVENT_RESET_START;
3311
3312         schedule_work(&vdev->reset_task);
3313         vxge_debug_entryexit(VXGE_TRACE,
3314                 "%s:%d  Exiting...", __func__, __LINE__);
3315 }
3316
3317 /**
3318  * vxge_vlan_rx_add_vid
3319  * @dev: net device pointer.
3320  * @proto: vlan protocol
3321  * @vid: vid
3322  *
3323  * Add the vlan id to the devices vlan id table
3324  */
3325 static int
3326 vxge_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
3327 {
3328         struct vxgedev *vdev = netdev_priv(dev);
3329         struct vxge_vpath *vpath;
3330         int vp_id;
3331
3332         /* Add these vlan to the vid table */
3333         for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
3334                 vpath = &vdev->vpaths[vp_id];
3335                 if (!vpath->is_open)
3336                         continue;
3337                 vxge_hw_vpath_vid_add(vpath->handle, vid);
3338         }
3339         set_bit(vid, vdev->active_vlans);
3340         return 0;
3341 }
3342
3343 /**
3344  * vxge_vlan_rx_kill_vid
3345  * @dev: net device pointer.
3346  * @proto: vlan protocol
3347  * @vid: vid
3348  *
3349  * Remove the vlan id from the device's vlan id table
3350  */
3351 static int
3352 vxge_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
3353 {
3354         struct vxgedev *vdev = netdev_priv(dev);
3355         struct vxge_vpath *vpath;
3356         int vp_id;
3357
3358         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
3359
3360         /* Delete this vlan from the vid table */
3361         for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
3362                 vpath = &vdev->vpaths[vp_id];
3363                 if (!vpath->is_open)
3364                         continue;
3365                 vxge_hw_vpath_vid_delete(vpath->handle, vid);
3366         }
3367         vxge_debug_entryexit(VXGE_TRACE,
3368                 "%s:%d  Exiting...", __func__, __LINE__);
3369         clear_bit(vid, vdev->active_vlans);
3370         return 0;
3371 }
3372
3373 static const struct net_device_ops vxge_netdev_ops = {
3374         .ndo_open               = vxge_open,
3375         .ndo_stop               = vxge_close,
3376         .ndo_get_stats64        = vxge_get_stats64,
3377         .ndo_start_xmit         = vxge_xmit,
3378         .ndo_validate_addr      = eth_validate_addr,
3379         .ndo_set_rx_mode        = vxge_set_multicast,
3380         .ndo_do_ioctl           = vxge_ioctl,
3381         .ndo_set_mac_address    = vxge_set_mac_addr,
3382         .ndo_change_mtu         = vxge_change_mtu,
3383         .ndo_fix_features       = vxge_fix_features,
3384         .ndo_set_features       = vxge_set_features,
3385         .ndo_vlan_rx_kill_vid   = vxge_vlan_rx_kill_vid,
3386         .ndo_vlan_rx_add_vid    = vxge_vlan_rx_add_vid,
3387         .ndo_tx_timeout         = vxge_tx_watchdog,
3388 #ifdef CONFIG_NET_POLL_CONTROLLER
3389         .ndo_poll_controller    = vxge_netpoll,
3390 #endif
3391 };
3392
3393 static int vxge_device_register(struct __vxge_hw_device *hldev,
3394                                 struct vxge_config *config, int high_dma,
3395                                 int no_of_vpath, struct vxgedev **vdev_out)
3396 {
3397         struct net_device *ndev;
3398         enum vxge_hw_status status = VXGE_HW_OK;
3399         struct vxgedev *vdev;
3400         int ret = 0, no_of_queue = 1;
3401         u64 stat;
3402
3403         *vdev_out = NULL;
3404         if (config->tx_steering_type)
3405                 no_of_queue = no_of_vpath;
3406
3407         ndev = alloc_etherdev_mq(sizeof(struct vxgedev),
3408                         no_of_queue);
3409         if (ndev == NULL) {
3410                 vxge_debug_init(
3411                         vxge_hw_device_trace_level_get(hldev),
3412                 "%s : device allocation failed", __func__);
3413                 ret = -ENODEV;
3414                 goto _out0;
3415         }
3416
3417         vxge_debug_entryexit(
3418                 vxge_hw_device_trace_level_get(hldev),
3419                 "%s: %s:%d  Entering...",
3420                 ndev->name, __func__, __LINE__);
3421
3422         vdev = netdev_priv(ndev);
3423         memset(vdev, 0, sizeof(struct vxgedev));
3424
3425         vdev->ndev = ndev;
3426         vdev->devh = hldev;
3427         vdev->pdev = hldev->pdev;
3428         memcpy(&vdev->config, config, sizeof(struct vxge_config));
3429         vdev->rx_hwts = 0;
3430         vdev->titan1 = (vdev->pdev->revision == VXGE_HW_TITAN1_PCI_REVISION);
3431
3432         SET_NETDEV_DEV(ndev, &vdev->pdev->dev);
3433
3434         ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_SG |
3435                 NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
3436                 NETIF_F_TSO | NETIF_F_TSO6 |
3437                 NETIF_F_HW_VLAN_CTAG_TX;
3438         if (vdev->config.rth_steering != NO_STEERING)
3439                 ndev->hw_features |= NETIF_F_RXHASH;
3440
3441         ndev->features |= ndev->hw_features |
3442                 NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER;
3443
3444
3445         ndev->netdev_ops = &vxge_netdev_ops;
3446
3447         ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT;
3448         INIT_WORK(&vdev->reset_task, vxge_reset);
3449
3450         vxge_initialize_ethtool_ops(ndev);
3451
3452         /* Allocate memory for vpath */
3453         vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) *
3454                                 no_of_vpath, GFP_KERNEL);
3455         if (!vdev->vpaths) {
3456                 vxge_debug_init(VXGE_ERR,
3457                         "%s: vpath memory allocation failed",
3458                         vdev->ndev->name);
3459                 ret = -ENOMEM;
3460                 goto _out1;
3461         }
3462
3463         vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
3464                 "%s : checksumming enabled", __func__);
3465
3466         if (high_dma) {
3467                 ndev->features |= NETIF_F_HIGHDMA;
3468                 vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
3469                         "%s : using High DMA", __func__);
3470         }
3471
3472         ret = register_netdev(ndev);
3473         if (ret) {
3474                 vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
3475                         "%s: %s : device registration failed!",
3476                         ndev->name, __func__);
3477                 goto _out2;
3478         }
3479
3480         /*  Set the factory defined MAC address initially */
3481         ndev->addr_len = ETH_ALEN;
3482
3483         /* Make Link state as off at this point, when the Link change
3484          * interrupt comes the state will be automatically changed to
3485          * the right state.
3486          */
3487         netif_carrier_off(ndev);
3488
3489         vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
3490                 "%s: Ethernet device registered",
3491                 ndev->name);
3492
3493         hldev->ndev = ndev;
3494         *vdev_out = vdev;
3495
3496         /* Resetting the Device stats */
3497         status = vxge_hw_mrpcim_stats_access(
3498                                 hldev,
3499                                 VXGE_HW_STATS_OP_CLEAR_ALL_STATS,
3500                                 0,
3501                                 0,
3502                                 &stat);
3503
3504         if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION)
3505                 vxge_debug_init(
3506                         vxge_hw_device_trace_level_get(hldev),
3507                         "%s: device stats clear returns"
3508                         "VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name);
3509
3510         vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev),
3511                 "%s: %s:%d  Exiting...",
3512                 ndev->name, __func__, __LINE__);
3513
3514         return ret;
3515 _out2:
3516         kfree(vdev->vpaths);
3517 _out1:
3518         free_netdev(ndev);
3519 _out0:
3520         return ret;
3521 }
3522
3523 /*
3524  * vxge_device_unregister
3525  *
3526  * This function will unregister and free network device
3527  */
3528 static void vxge_device_unregister(struct __vxge_hw_device *hldev)
3529 {
3530         struct vxgedev *vdev;
3531         struct net_device *dev;
3532         char buf[IFNAMSIZ];
3533
3534         dev = hldev->ndev;
3535         vdev = netdev_priv(dev);
3536
3537         vxge_debug_entryexit(vdev->level_trace, "%s: %s:%d", vdev->ndev->name,
3538                              __func__, __LINE__);
3539
3540         strlcpy(buf, dev->name, IFNAMSIZ);
3541
3542         flush_work(&vdev->reset_task);
3543
3544         /* in 2.6 will call stop() if device is up */
3545         unregister_netdev(dev);
3546
3547         kfree(vdev->vpaths);
3548
3549         /* we are safe to free it now */
3550         free_netdev(dev);
3551
3552         vxge_debug_init(vdev->level_trace, "%s: ethernet device unregistered",
3553                         buf);
3554         vxge_debug_entryexit(vdev->level_trace, "%s: %s:%d  Exiting...", buf,
3555                              __func__, __LINE__);
3556 }
3557
3558 /*
3559  * vxge_callback_crit_err
3560  *
3561  * This function is called by the alarm handler in interrupt context.
3562  * Driver must analyze it based on the event type.
3563  */
3564 static void
3565 vxge_callback_crit_err(struct __vxge_hw_device *hldev,
3566                         enum vxge_hw_event type, u64 vp_id)
3567 {
3568         struct net_device *dev = hldev->ndev;
3569         struct vxgedev *vdev = netdev_priv(dev);
3570         struct vxge_vpath *vpath = NULL;
3571         int vpath_idx;
3572
3573         vxge_debug_entryexit(vdev->level_trace,
3574                 "%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
3575
3576         /* Note: This event type should be used for device wide
3577          * indications only - Serious errors, Slot freeze and critical errors
3578          */
3579         vdev->cric_err_event = type;
3580
3581         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
3582                 vpath = &vdev->vpaths[vpath_idx];
3583                 if (vpath->device_id == vp_id)
3584                         break;
3585         }
3586
3587         if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) {
3588                 if (type == VXGE_HW_EVENT_SLOT_FREEZE) {
3589                         vxge_debug_init(VXGE_ERR,
3590                                 "%s: Slot is frozen", vdev->ndev->name);
3591                 } else if (type == VXGE_HW_EVENT_SERR) {
3592                         vxge_debug_init(VXGE_ERR,
3593                                 "%s: Encountered Serious Error",
3594                                 vdev->ndev->name);
3595                 } else if (type == VXGE_HW_EVENT_CRITICAL_ERR)
3596                         vxge_debug_init(VXGE_ERR,
3597                                 "%s: Encountered Critical Error",
3598                                 vdev->ndev->name);
3599         }
3600
3601         if ((type == VXGE_HW_EVENT_SERR) ||
3602                 (type == VXGE_HW_EVENT_SLOT_FREEZE)) {
3603                 if (unlikely(vdev->exec_mode))
3604                         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
3605         } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) {
3606                 vxge_hw_device_mask_all(hldev);
3607                 if (unlikely(vdev->exec_mode))
3608                         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
3609         } else if ((type == VXGE_HW_EVENT_FIFO_ERR) ||
3610                   (type == VXGE_HW_EVENT_VPATH_ERR)) {
3611
3612                 if (unlikely(vdev->exec_mode))
3613                         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
3614                 else {
3615                         /* check if this vpath is already set for reset */
3616                         if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) {
3617
3618                                 /* disable interrupts for this vpath */
3619                                 vxge_vpath_intr_disable(vdev, vpath_idx);
3620
3621                                 /* stop the queue for this vpath */
3622                                 netif_tx_stop_queue(vpath->fifo.txq);
3623                         }
3624                 }
3625         }
3626
3627         vxge_debug_entryexit(vdev->level_trace,
3628                 "%s: %s:%d  Exiting...",
3629                 vdev->ndev->name, __func__, __LINE__);
3630 }
3631
3632 static void verify_bandwidth(void)
3633 {
3634         int i, band_width, total = 0, equal_priority = 0;
3635
3636         /* 1. If user enters 0 for some fifo, give equal priority to all */
3637         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
3638                 if (bw_percentage[i] == 0) {
3639                         equal_priority = 1;
3640                         break;
3641                 }
3642         }
3643
3644         if (!equal_priority) {
3645                 /* 2. If sum exceeds 100, give equal priority to all */
3646                 for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
3647                         if (bw_percentage[i] == 0xFF)
3648                                 break;
3649
3650                         total += bw_percentage[i];
3651                         if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) {
3652                                 equal_priority = 1;
3653                                 break;
3654                         }
3655                 }
3656         }
3657
3658         if (!equal_priority) {
3659                 /* Is all the bandwidth consumed? */
3660                 if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) {
3661                         if (i < VXGE_HW_MAX_VIRTUAL_PATHS) {
3662                                 /* Split rest of bw equally among next VPs*/
3663                                 band_width =
3664                                   (VXGE_HW_VPATH_BANDWIDTH_MAX  - total) /
3665                                         (VXGE_HW_MAX_VIRTUAL_PATHS - i);
3666                                 if (band_width < 2) /* min of 2% */
3667                                         equal_priority = 1;
3668                                 else {
3669                                         for (; i < VXGE_HW_MAX_VIRTUAL_PATHS;
3670                                                 i++)
3671                                                 bw_percentage[i] =
3672                                                         band_width;
3673                                 }
3674                         }
3675                 } else if (i < VXGE_HW_MAX_VIRTUAL_PATHS)
3676                         equal_priority = 1;
3677         }
3678
3679         if (equal_priority) {
3680                 vxge_debug_init(VXGE_ERR,
3681                         "%s: Assigning equal bandwidth to all the vpaths",
3682                         VXGE_DRIVER_NAME);
3683                 bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX /
3684                                         VXGE_HW_MAX_VIRTUAL_PATHS;
3685                 for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
3686                         bw_percentage[i] = bw_percentage[0];
3687         }
3688 }
3689
3690 /*
3691  * Vpath configuration
3692  */
3693 static int vxge_config_vpaths(struct vxge_hw_device_config *device_config,
3694                               u64 vpath_mask, struct vxge_config *config_param)
3695 {
3696         int i, no_of_vpaths = 0, default_no_vpath = 0, temp;
3697         u32 txdl_size, txdl_per_memblock;
3698
3699         temp = driver_config->vpath_per_dev;
3700         if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) &&
3701                 (max_config_dev == VXGE_MAX_CONFIG_DEV)) {
3702                 /* No more CPU. Return vpath number as zero.*/
3703                 if (driver_config->g_no_cpus == -1)
3704                         return 0;
3705
3706                 if (!driver_config->g_no_cpus)
3707                         driver_config->g_no_cpus =
3708                                 netif_get_num_default_rss_queues();
3709
3710                 driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1;
3711                 if (!driver_config->vpath_per_dev)
3712                         driver_config->vpath_per_dev = 1;
3713
3714                 for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
3715                         if (!vxge_bVALn(vpath_mask, i, 1))
3716                                 continue;
3717                         else
3718                                 default_no_vpath++;
3719                 if (default_no_vpath < driver_config->vpath_per_dev)
3720                         driver_config->vpath_per_dev = default_no_vpath;
3721
3722                 driver_config->g_no_cpus = driver_config->g_no_cpus -
3723                                 (driver_config->vpath_per_dev * 2);
3724                 if (driver_config->g_no_cpus <= 0)
3725                         driver_config->g_no_cpus = -1;
3726         }
3727
3728         if (driver_config->vpath_per_dev == 1) {
3729                 vxge_debug_ll_config(VXGE_TRACE,
3730                         "%s: Disable tx and rx steering, "
3731                         "as single vpath is configured", VXGE_DRIVER_NAME);
3732                 config_param->rth_steering = NO_STEERING;
3733                 config_param->tx_steering_type = NO_STEERING;
3734                 device_config->rth_en = 0;
3735         }
3736
3737         /* configure bandwidth */
3738         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
3739                 device_config->vp_config[i].min_bandwidth = bw_percentage[i];
3740
3741         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
3742                 device_config->vp_config[i].vp_id = i;
3743                 device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU;
3744                 if (no_of_vpaths < driver_config->vpath_per_dev) {
3745                         if (!vxge_bVALn(vpath_mask, i, 1)) {
3746                                 vxge_debug_ll_config(VXGE_TRACE,
3747                                         "%s: vpath: %d is not available",
3748                                         VXGE_DRIVER_NAME, i);
3749                                 continue;
3750                         } else {
3751                                 vxge_debug_ll_config(VXGE_TRACE,
3752                                         "%s: vpath: %d available",
3753                                         VXGE_DRIVER_NAME, i);
3754                                 no_of_vpaths++;
3755                         }
3756                 } else {
3757                         vxge_debug_ll_config(VXGE_TRACE,
3758                                 "%s: vpath: %d is not configured, "
3759                                 "max_config_vpath exceeded",
3760                                 VXGE_DRIVER_NAME, i);
3761                         break;
3762                 }
3763
3764                 /* Configure Tx fifo's */
3765                 device_config->vp_config[i].fifo.enable =
3766                                                 VXGE_HW_FIFO_ENABLE;
3767                 device_config->vp_config[i].fifo.max_frags =
3768                                 MAX_SKB_FRAGS + 1;
3769                 device_config->vp_config[i].fifo.memblock_size =
3770                         VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE;
3771
3772                 txdl_size = device_config->vp_config[i].fifo.max_frags *
3773                                 sizeof(struct vxge_hw_fifo_txd);
3774                 txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size;
3775
3776                 device_config->vp_config[i].fifo.fifo_blocks =
3777                         ((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1;
3778
3779                 device_config->vp_config[i].fifo.intr =
3780                                 VXGE_HW_FIFO_QUEUE_INTR_DISABLE;
3781
3782                 /* Configure tti properties */
3783                 device_config->vp_config[i].tti.intr_enable =
3784                                         VXGE_HW_TIM_INTR_ENABLE;
3785
3786                 device_config->vp_config[i].tti.btimer_val =
3787                         (VXGE_TTI_BTIMER_VAL * 1000) / 272;
3788
3789                 device_config->vp_config[i].tti.timer_ac_en =
3790                                 VXGE_HW_TIM_TIMER_AC_ENABLE;
3791
3792                 /* For msi-x with napi (each vector has a handler of its own) -
3793                  * Set CI to OFF for all vpaths
3794                  */
3795                 device_config->vp_config[i].tti.timer_ci_en =
3796                         VXGE_HW_TIM_TIMER_CI_DISABLE;
3797
3798                 device_config->vp_config[i].tti.timer_ri_en =
3799                                 VXGE_HW_TIM_TIMER_RI_DISABLE;
3800
3801                 device_config->vp_config[i].tti.util_sel =
3802                         VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL;
3803
3804                 device_config->vp_config[i].tti.ltimer_val =
3805                         (VXGE_TTI_LTIMER_VAL * 1000) / 272;
3806
3807                 device_config->vp_config[i].tti.rtimer_val =
3808                         (VXGE_TTI_RTIMER_VAL * 1000) / 272;
3809
3810                 device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A;
3811                 device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B;
3812                 device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C;
3813                 device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A;
3814                 device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B;
3815                 device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C;
3816                 device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D;
3817
3818                 /* Configure Rx rings */
3819                 device_config->vp_config[i].ring.enable  =
3820                                                 VXGE_HW_RING_ENABLE;
3821
3822                 device_config->vp_config[i].ring.ring_blocks  =
3823                                                 VXGE_HW_DEF_RING_BLOCKS;
3824
3825                 device_config->vp_config[i].ring.buffer_mode =
3826                         VXGE_HW_RING_RXD_BUFFER_MODE_1;
3827
3828                 device_config->vp_config[i].ring.rxds_limit  =
3829                                 VXGE_HW_DEF_RING_RXDS_LIMIT;
3830
3831                 device_config->vp_config[i].ring.scatter_mode =
3832                                         VXGE_HW_RING_SCATTER_MODE_A;
3833
3834                 /* Configure rti properties */
3835                 device_config->vp_config[i].rti.intr_enable =
3836                                         VXGE_HW_TIM_INTR_ENABLE;
3837
3838                 device_config->vp_config[i].rti.btimer_val =
3839                         (VXGE_RTI_BTIMER_VAL * 1000)/272;
3840
3841                 device_config->vp_config[i].rti.timer_ac_en =
3842                                                 VXGE_HW_TIM_TIMER_AC_ENABLE;
3843
3844                 device_config->vp_config[i].rti.timer_ci_en =
3845                                                 VXGE_HW_TIM_TIMER_CI_DISABLE;
3846
3847                 device_config->vp_config[i].rti.timer_ri_en =
3848                                                 VXGE_HW_TIM_TIMER_RI_DISABLE;
3849
3850                 device_config->vp_config[i].rti.util_sel =
3851                                 VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL;
3852
3853                 device_config->vp_config[i].rti.urange_a =
3854                                                 RTI_RX_URANGE_A;
3855                 device_config->vp_config[i].rti.urange_b =
3856                                                 RTI_RX_URANGE_B;
3857                 device_config->vp_config[i].rti.urange_c =
3858                                                 RTI_RX_URANGE_C;
3859                 device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A;
3860                 device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B;
3861                 device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C;
3862                 device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D;
3863
3864                 device_config->vp_config[i].rti.rtimer_val =
3865                         (VXGE_RTI_RTIMER_VAL * 1000) / 272;
3866
3867                 device_config->vp_config[i].rti.ltimer_val =
3868                         (VXGE_RTI_LTIMER_VAL * 1000) / 272;
3869
3870                 device_config->vp_config[i].rpa_strip_vlan_tag =
3871                         vlan_tag_strip;
3872         }
3873
3874         driver_config->vpath_per_dev = temp;
3875         return no_of_vpaths;
3876 }
3877
3878 /* initialize device configuratrions */
3879 static void vxge_device_config_init(struct vxge_hw_device_config *device_config,
3880                                     int *intr_type)
3881 {
3882         /* Used for CQRQ/SRQ. */
3883         device_config->dma_blockpool_initial =
3884                         VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE;
3885
3886         device_config->dma_blockpool_max =
3887                         VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE;
3888
3889         if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT)
3890                 max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT;
3891
3892 #ifndef CONFIG_PCI_MSI
3893         vxge_debug_init(VXGE_ERR,
3894                 "%s: This Kernel does not support "
3895                 "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME);
3896         *intr_type = INTA;
3897 #endif
3898
3899         /* Configure whether MSI-X or IRQL. */
3900         switch (*intr_type) {
3901         case INTA:
3902                 device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE;
3903                 break;
3904
3905         case MSI_X:
3906                 device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX_ONE_SHOT;
3907                 break;
3908         }
3909
3910         /* Timer period between device poll */
3911         device_config->device_poll_millis = VXGE_TIMER_DELAY;
3912
3913         /* Configure mac based steering. */
3914         device_config->rts_mac_en = addr_learn_en;
3915
3916         /* Configure Vpaths */
3917         device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT;
3918
3919         vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ",
3920                         __func__);
3921         vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d",
3922                         device_config->intr_mode);
3923         vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d",
3924                         device_config->device_poll_millis);
3925         vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d",
3926                         device_config->rth_en);
3927         vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d",
3928                         device_config->rth_it_type);
3929 }
3930
3931 static void vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask)
3932 {
3933         int i;
3934
3935         vxge_debug_init(VXGE_TRACE,
3936                 "%s: %d Vpath(s) opened",
3937                 vdev->ndev->name, vdev->no_of_vpath);
3938
3939         switch (vdev->config.intr_type) {
3940         case INTA:
3941                 vxge_debug_init(VXGE_TRACE,
3942                         "%s: Interrupt type INTA", vdev->ndev->name);
3943                 break;
3944
3945         case MSI_X:
3946                 vxge_debug_init(VXGE_TRACE,
3947                         "%s: Interrupt type MSI-X", vdev->ndev->name);
3948                 break;
3949         }
3950
3951         if (vdev->config.rth_steering) {
3952                 vxge_debug_init(VXGE_TRACE,
3953                         "%s: RTH steering enabled for TCP_IPV4",
3954                         vdev->ndev->name);
3955         } else {
3956                 vxge_debug_init(VXGE_TRACE,
3957                         "%s: RTH steering disabled", vdev->ndev->name);
3958         }
3959
3960         switch (vdev->config.tx_steering_type) {
3961         case NO_STEERING:
3962                 vxge_debug_init(VXGE_TRACE,
3963                         "%s: Tx steering disabled", vdev->ndev->name);
3964                 break;
3965         case TX_PRIORITY_STEERING:
3966                 vxge_debug_init(VXGE_TRACE,
3967                         "%s: Unsupported tx steering option",
3968                         vdev->ndev->name);
3969                 vxge_debug_init(VXGE_TRACE,
3970                         "%s: Tx steering disabled", vdev->ndev->name);
3971                 vdev->config.tx_steering_type = 0;
3972                 break;
3973         case TX_VLAN_STEERING:
3974                 vxge_debug_init(VXGE_TRACE,
3975                         "%s: Unsupported tx steering option",
3976                         vdev->ndev->name);
3977                 vxge_debug_init(VXGE_TRACE,
3978                         "%s: Tx steering disabled", vdev->ndev->name);
3979                 vdev->config.tx_steering_type = 0;
3980                 break;
3981         case TX_MULTIQ_STEERING:
3982                 vxge_debug_init(VXGE_TRACE,
3983                         "%s: Tx multiqueue steering enabled",
3984                         vdev->ndev->name);
3985                 break;
3986         case TX_PORT_STEERING:
3987                 vxge_debug_init(VXGE_TRACE,
3988                         "%s: Tx port steering enabled",
3989                         vdev->ndev->name);
3990                 break;
3991         default:
3992                 vxge_debug_init(VXGE_ERR,
3993                         "%s: Unsupported tx steering type",
3994                         vdev->ndev->name);
3995                 vxge_debug_init(VXGE_TRACE,
3996                         "%s: Tx steering disabled", vdev->ndev->name);
3997                 vdev->config.tx_steering_type = 0;
3998         }
3999
4000         if (vdev->config.addr_learn_en)
4001                 vxge_debug_init(VXGE_TRACE,
4002                         "%s: MAC Address learning enabled", vdev->ndev->name);
4003
4004         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
4005                 if (!vxge_bVALn(vpath_mask, i, 1))
4006                         continue;
4007                 vxge_debug_ll_config(VXGE_TRACE,
4008                         "%s: MTU size - %d", vdev->ndev->name,
4009                         ((vdev->devh))->
4010                                 config.vp_config[i].mtu);
4011                 vxge_debug_init(VXGE_TRACE,
4012                         "%s: VLAN tag stripping %s", vdev->ndev->name,
4013                         ((vdev->devh))->
4014                                 config.vp_config[i].rpa_strip_vlan_tag
4015                         ? "Enabled" : "Disabled");
4016                 vxge_debug_ll_config(VXGE_TRACE,
4017                         "%s: Max frags : %d", vdev->ndev->name,
4018                         ((vdev->devh))->
4019                                 config.vp_config[i].fifo.max_frags);
4020                 break;
4021         }
4022 }
4023
4024 #ifdef CONFIG_PM
4025 /**
4026  * vxge_pm_suspend - vxge power management suspend entry point
4027  *
4028  */
4029 static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state)
4030 {
4031         return -ENOSYS;
4032 }
4033 /**
4034  * vxge_pm_resume - vxge power management resume entry point
4035  *
4036  */
4037 static int vxge_pm_resume(struct pci_dev *pdev)
4038 {
4039         return -ENOSYS;
4040 }
4041
4042 #endif
4043
4044 /**
4045  * vxge_io_error_detected - called when PCI error is detected
4046  * @pdev: Pointer to PCI device
4047  * @state: The current pci connection state
4048  *
4049  * This function is called after a PCI bus error affecting
4050  * this device has been detected.
4051  */
4052 static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev,
4053                                                 pci_channel_state_t state)
4054 {
4055         struct __vxge_hw_device *hldev = pci_get_drvdata(pdev);
4056         struct net_device *netdev = hldev->ndev;
4057
4058         netif_device_detach(netdev);
4059
4060         if (state == pci_channel_io_perm_failure)
4061                 return PCI_ERS_RESULT_DISCONNECT;
4062
4063         if (netif_running(netdev)) {
4064                 /* Bring down the card, while avoiding PCI I/O */
4065                 do_vxge_close(netdev, 0);
4066         }
4067
4068         pci_disable_device(pdev);
4069
4070         return PCI_ERS_RESULT_NEED_RESET;
4071 }
4072
4073 /**
4074  * vxge_io_slot_reset - called after the pci bus has been reset.
4075  * @pdev: Pointer to PCI device
4076  *
4077  * Restart the card from scratch, as if from a cold-boot.
4078  * At this point, the card has exprienced a hard reset,
4079  * followed by fixups by BIOS, and has its config space
4080  * set up identically to what it was at cold boot.
4081  */
4082 static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev)
4083 {
4084         struct __vxge_hw_device *hldev = pci_get_drvdata(pdev);
4085         struct net_device *netdev = hldev->ndev;
4086
4087         struct vxgedev *vdev = netdev_priv(netdev);
4088
4089         if (pci_enable_device(pdev)) {
4090                 netdev_err(netdev, "Cannot re-enable device after reset\n");
4091                 return PCI_ERS_RESULT_DISCONNECT;
4092         }
4093
4094         pci_set_master(pdev);
4095         do_vxge_reset(vdev, VXGE_LL_FULL_RESET);
4096
4097         return PCI_ERS_RESULT_RECOVERED;
4098 }
4099
4100 /**
4101  * vxge_io_resume - called when traffic can start flowing again.
4102  * @pdev: Pointer to PCI device
4103  *
4104  * This callback is called when the error recovery driver tells
4105  * us that its OK to resume normal operation.
4106  */
4107 static void vxge_io_resume(struct pci_dev *pdev)
4108 {
4109         struct __vxge_hw_device *hldev = pci_get_drvdata(pdev);
4110         struct net_device *netdev = hldev->ndev;
4111
4112         if (netif_running(netdev)) {
4113                 if (vxge_open(netdev)) {
4114                         netdev_err(netdev,
4115                                    "Can't bring device back up after reset\n");
4116                         return;
4117                 }
4118         }
4119
4120         netif_device_attach(netdev);
4121 }
4122
4123 static inline u32 vxge_get_num_vfs(u64 function_mode)
4124 {
4125         u32 num_functions = 0;
4126
4127         switch (function_mode) {
4128         case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION:
4129         case VXGE_HW_FUNCTION_MODE_SRIOV_8:
4130                 num_functions = 8;
4131                 break;
4132         case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
4133                 num_functions = 1;
4134                 break;
4135         case VXGE_HW_FUNCTION_MODE_SRIOV:
4136         case VXGE_HW_FUNCTION_MODE_MRIOV:
4137         case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_17:
4138                 num_functions = 17;
4139                 break;
4140         case VXGE_HW_FUNCTION_MODE_SRIOV_4:
4141                 num_functions = 4;
4142                 break;
4143         case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_2:
4144                 num_functions = 2;
4145                 break;
4146         case VXGE_HW_FUNCTION_MODE_MRIOV_8:
4147                 num_functions = 8; /* TODO */
4148                 break;
4149         }
4150         return num_functions;
4151 }
4152
4153 int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override)
4154 {
4155         struct __vxge_hw_device *hldev = vdev->devh;
4156         u32 maj, min, bld, cmaj, cmin, cbld;
4157         enum vxge_hw_status status;
4158         const struct firmware *fw;
4159         int ret;
4160
4161         ret = request_firmware(&fw, fw_name, &vdev->pdev->dev);
4162         if (ret) {
4163                 vxge_debug_init(VXGE_ERR, "%s: Firmware file '%s' not found",
4164                                 VXGE_DRIVER_NAME, fw_name);
4165                 goto out;
4166         }
4167
4168         /* Load the new firmware onto the adapter */
4169         status = vxge_update_fw_image(hldev, fw->data, fw->size);
4170         if (status != VXGE_HW_OK) {
4171                 vxge_debug_init(VXGE_ERR,
4172                                 "%s: FW image download to adapter failed '%s'.",
4173                                 VXGE_DRIVER_NAME, fw_name);
4174                 ret = -EIO;
4175                 goto out;
4176         }
4177
4178         /* Read the version of the new firmware */
4179         status = vxge_hw_upgrade_read_version(hldev, &maj, &min, &bld);
4180         if (status != VXGE_HW_OK) {
4181                 vxge_debug_init(VXGE_ERR,
4182                                 "%s: Upgrade read version failed '%s'.",
4183                                 VXGE_DRIVER_NAME, fw_name);
4184                 ret = -EIO;
4185                 goto out;
4186         }
4187
4188         cmaj = vdev->config.device_hw_info.fw_version.major;
4189         cmin = vdev->config.device_hw_info.fw_version.minor;
4190         cbld = vdev->config.device_hw_info.fw_version.build;
4191         /* It's possible the version in /lib/firmware is not the latest version.
4192          * If so, we could get into a loop of trying to upgrade to the latest
4193          * and flashing the older version.
4194          */
4195         if (VXGE_FW_VER(maj, min, bld) == VXGE_FW_VER(cmaj, cmin, cbld) &&
4196             !override) {
4197                 ret = -EINVAL;
4198                 goto out;
4199         }
4200
4201         printk(KERN_NOTICE "Upgrade to firmware version %d.%d.%d commencing\n",
4202                maj, min, bld);
4203
4204         /* Flash the adapter with the new firmware */
4205         status = vxge_hw_flash_fw(hldev);
4206         if (status != VXGE_HW_OK) {
4207                 vxge_debug_init(VXGE_ERR, "%s: Upgrade commit failed '%s'.",
4208                                 VXGE_DRIVER_NAME, fw_name);
4209                 ret = -EIO;
4210                 goto out;
4211         }
4212
4213         printk(KERN_NOTICE "Upgrade of firmware successful!  Adapter must be "
4214                "hard reset before using, thus requiring a system reboot or a "
4215                "hotplug event.\n");
4216
4217 out:
4218         release_firmware(fw);
4219         return ret;
4220 }
4221
4222 static int vxge_probe_fw_update(struct vxgedev *vdev)
4223 {
4224         u32 maj, min, bld;
4225         int ret, gpxe = 0;
4226         char *fw_name;
4227
4228         maj = vdev->config.device_hw_info.fw_version.major;
4229         min = vdev->config.device_hw_info.fw_version.minor;
4230         bld = vdev->config.device_hw_info.fw_version.build;
4231
4232         if (VXGE_FW_VER(maj, min, bld) == VXGE_CERT_FW_VER)
4233                 return 0;
4234
4235         /* Ignore the build number when determining if the current firmware is
4236          * "too new" to load the driver
4237          */
4238         if (VXGE_FW_VER(maj, min, 0) > VXGE_CERT_FW_VER) {
4239                 vxge_debug_init(VXGE_ERR, "%s: Firmware newer than last known "
4240                                 "version, unable to load driver\n",
4241                                 VXGE_DRIVER_NAME);
4242                 return -EINVAL;
4243         }
4244
4245         /* Firmware 1.4.4 and older cannot be upgraded, and is too ancient to
4246          * work with this driver.
4247          */
4248         if (VXGE_FW_VER(maj, min, bld) <= VXGE_FW_DEAD_VER) {
4249                 vxge_debug_init(VXGE_ERR, "%s: Firmware %d.%d.%d cannot be "
4250                                 "upgraded\n", VXGE_DRIVER_NAME, maj, min, bld);
4251                 return -EINVAL;
4252         }
4253
4254         /* If file not specified, determine gPXE or not */
4255         if (VXGE_FW_VER(maj, min, bld) >= VXGE_EPROM_FW_VER) {
4256                 int i;
4257                 for (i = 0; i < VXGE_HW_MAX_ROM_IMAGES; i++)
4258                         if (vdev->devh->eprom_versions[i]) {
4259                                 gpxe = 1;
4260                                 break;
4261                         }
4262         }
4263         if (gpxe)
4264                 fw_name = "vxge/X3fw-pxe.ncf";
4265         else
4266                 fw_name = "vxge/X3fw.ncf";
4267
4268         ret = vxge_fw_upgrade(vdev, fw_name, 0);
4269         /* -EINVAL and -ENOENT are not fatal errors for flashing firmware on
4270          * probe, so ignore them
4271          */
4272         if (ret != -EINVAL && ret != -ENOENT)
4273                 return -EIO;
4274         else
4275                 ret = 0;
4276
4277         if (VXGE_FW_VER(VXGE_CERT_FW_VER_MAJOR, VXGE_CERT_FW_VER_MINOR, 0) >
4278             VXGE_FW_VER(maj, min, 0)) {
4279                 vxge_debug_init(VXGE_ERR, "%s: Firmware %d.%d.%d is too old to"
4280                                 " be used with this driver.",
4281                                 VXGE_DRIVER_NAME, maj, min, bld);
4282                 return -EINVAL;
4283         }
4284
4285         return ret;
4286 }
4287
4288 static int is_sriov_initialized(struct pci_dev *pdev)
4289 {
4290         int pos;
4291         u16 ctrl;
4292
4293         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
4294         if (pos) {
4295                 pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &ctrl);
4296                 if (ctrl & PCI_SRIOV_CTRL_VFE)
4297                         return 1;
4298         }
4299         return 0;
4300 }
4301
4302 static const struct vxge_hw_uld_cbs vxge_callbacks = {
4303         .link_up = vxge_callback_link_up,
4304         .link_down = vxge_callback_link_down,
4305         .crit_err = vxge_callback_crit_err,
4306 };
4307
4308 /**
4309  * vxge_probe
4310  * @pdev : structure containing the PCI related information of the device.
4311  * @pre: List of PCI devices supported by the driver listed in vxge_id_table.
4312  * Description:
4313  * This function is called when a new PCI device gets detected and initializes
4314  * it.
4315  * Return value:
4316  * returns 0 on success and negative on failure.
4317  *
4318  */
4319 static int
4320 vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
4321 {
4322         struct __vxge_hw_device *hldev;
4323         enum vxge_hw_status status;
4324         int ret;
4325         int high_dma = 0;
4326         u64 vpath_mask = 0;
4327         struct vxgedev *vdev;
4328         struct vxge_config *ll_config = NULL;
4329         struct vxge_hw_device_config *device_config = NULL;
4330         struct vxge_hw_device_attr attr;
4331         int i, j, no_of_vpath = 0, max_vpath_supported = 0;
4332         u8 *macaddr;
4333         struct vxge_mac_addrs *entry;
4334         static int bus = -1, device = -1;
4335         u32 host_type;
4336         u8 new_device = 0;
4337         enum vxge_hw_status is_privileged;
4338         u32 function_mode;
4339         u32 num_vfs = 0;
4340
4341         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
4342         attr.pdev = pdev;
4343
4344         /* In SRIOV-17 mode, functions of the same adapter
4345          * can be deployed on different buses
4346          */
4347         if (((bus != pdev->bus->number) || (device != PCI_SLOT(pdev->devfn))) &&
4348             !pdev->is_virtfn)
4349                 new_device = 1;
4350
4351         bus = pdev->bus->number;
4352         device = PCI_SLOT(pdev->devfn);
4353
4354         if (new_device) {
4355                 if (driver_config->config_dev_cnt &&
4356                    (driver_config->config_dev_cnt !=
4357                         driver_config->total_dev_cnt))
4358                         vxge_debug_init(VXGE_ERR,
4359                                 "%s: Configured %d of %d devices",
4360                                 VXGE_DRIVER_NAME,
4361                                 driver_config->config_dev_cnt,
4362                                 driver_config->total_dev_cnt);
4363                 driver_config->config_dev_cnt = 0;
4364                 driver_config->total_dev_cnt = 0;
4365         }
4366
4367         /* Now making the CPU based no of vpath calculation
4368          * applicable for individual functions as well.
4369          */
4370         driver_config->g_no_cpus = 0;
4371         driver_config->vpath_per_dev = max_config_vpath;
4372
4373         driver_config->total_dev_cnt++;
4374         if (++driver_config->config_dev_cnt > max_config_dev) {
4375                 ret = 0;
4376                 goto _exit0;
4377         }
4378
4379         device_config = kzalloc(sizeof(struct vxge_hw_device_config),
4380                 GFP_KERNEL);
4381         if (!device_config) {
4382                 ret = -ENOMEM;
4383                 vxge_debug_init(VXGE_ERR,
4384                         "device_config : malloc failed %s %d",
4385                         __FILE__, __LINE__);
4386                 goto _exit0;
4387         }
4388
4389         ll_config = kzalloc(sizeof(struct vxge_config), GFP_KERNEL);
4390         if (!ll_config) {
4391                 ret = -ENOMEM;
4392                 vxge_debug_init(VXGE_ERR,
4393                         "device_config : malloc failed %s %d",
4394                         __FILE__, __LINE__);
4395                 goto _exit0;
4396         }
4397         ll_config->tx_steering_type = TX_MULTIQ_STEERING;
4398         ll_config->intr_type = MSI_X;
4399         ll_config->napi_weight = NEW_NAPI_WEIGHT;
4400         ll_config->rth_steering = RTH_STEERING;
4401
4402         /* get the default configuration parameters */
4403         vxge_hw_device_config_default_get(device_config);
4404
4405         /* initialize configuration parameters */
4406         vxge_device_config_init(device_config, &ll_config->intr_type);
4407
4408         ret = pci_enable_device(pdev);
4409         if (ret) {
4410                 vxge_debug_init(VXGE_ERR,
4411                         "%s : can not enable PCI device", __func__);
4412                 goto _exit0;
4413         }
4414
4415         if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
4416                 vxge_debug_ll_config(VXGE_TRACE,
4417                         "%s : using 64bit DMA", __func__);
4418
4419                 high_dma = 1;
4420
4421                 if (pci_set_consistent_dma_mask(pdev,
4422                                                 DMA_BIT_MASK(64))) {
4423                         vxge_debug_init(VXGE_ERR,
4424                                 "%s : unable to obtain 64bit DMA for "
4425                                 "consistent allocations", __func__);
4426                         ret = -ENOMEM;
4427                         goto _exit1;
4428                 }
4429         } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
4430                 vxge_debug_ll_config(VXGE_TRACE,
4431                         "%s : using 32bit DMA", __func__);
4432         } else {
4433                 ret = -ENOMEM;
4434                 goto _exit1;
4435         }
4436
4437         ret = pci_request_region(pdev, 0, VXGE_DRIVER_NAME);
4438         if (ret) {
4439                 vxge_debug_init(VXGE_ERR,
4440                         "%s : request regions failed", __func__);
4441                 goto _exit1;
4442         }
4443
4444         pci_set_master(pdev);
4445
4446         attr.bar0 = pci_ioremap_bar(pdev, 0);
4447         if (!attr.bar0) {
4448                 vxge_debug_init(VXGE_ERR,
4449                         "%s : cannot remap io memory bar0", __func__);
4450                 ret = -ENODEV;
4451                 goto _exit2;
4452         }
4453         vxge_debug_ll_config(VXGE_TRACE,
4454                 "pci ioremap bar0: %p:0x%llx",
4455                 attr.bar0,
4456                 (unsigned long long)pci_resource_start(pdev, 0));
4457
4458         status = vxge_hw_device_hw_info_get(attr.bar0,
4459                         &ll_config->device_hw_info);
4460         if (status != VXGE_HW_OK) {
4461                 vxge_debug_init(VXGE_ERR,
4462                         "%s: Reading of hardware info failed."
4463                         "Please try upgrading the firmware.", VXGE_DRIVER_NAME);
4464                 ret = -EINVAL;
4465                 goto _exit3;
4466         }
4467
4468         vpath_mask = ll_config->device_hw_info.vpath_mask;
4469         if (vpath_mask == 0) {
4470                 vxge_debug_ll_config(VXGE_TRACE,
4471                         "%s: No vpaths available in device", VXGE_DRIVER_NAME);
4472                 ret = -EINVAL;
4473                 goto _exit3;
4474         }
4475
4476         vxge_debug_ll_config(VXGE_TRACE,
4477                 "%s:%d  Vpath mask = %llx", __func__, __LINE__,
4478                 (unsigned long long)vpath_mask);
4479
4480         function_mode = ll_config->device_hw_info.function_mode;
4481         host_type = ll_config->device_hw_info.host_type;
4482         is_privileged = __vxge_hw_device_is_privilaged(host_type,
4483                 ll_config->device_hw_info.func_id);
4484
4485         /* Check how many vpaths are available */
4486         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
4487                 if (!((vpath_mask) & vxge_mBIT(i)))
4488                         continue;
4489                 max_vpath_supported++;
4490         }
4491
4492         if (new_device)
4493                 num_vfs = vxge_get_num_vfs(function_mode) - 1;
4494
4495         /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
4496         if (is_sriov(function_mode) && !is_sriov_initialized(pdev) &&
4497            (ll_config->intr_type != INTA)) {
4498                 ret = pci_enable_sriov(pdev, num_vfs);
4499                 if (ret)
4500                         vxge_debug_ll_config(VXGE_ERR,
4501                                 "Failed in enabling SRIOV mode: %d\n", ret);
4502                         /* No need to fail out, as an error here is non-fatal */
4503         }
4504
4505         /*
4506          * Configure vpaths and get driver configured number of vpaths
4507          * which is less than or equal to the maximum vpaths per function.
4508          */
4509         no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, ll_config);
4510         if (!no_of_vpath) {
4511                 vxge_debug_ll_config(VXGE_ERR,
4512                         "%s: No more vpaths to configure", VXGE_DRIVER_NAME);
4513                 ret = 0;
4514                 goto _exit3;
4515         }
4516
4517         /* Setting driver callbacks */
4518         attr.uld_callbacks = &vxge_callbacks;
4519
4520         status = vxge_hw_device_initialize(&hldev, &attr, device_config);
4521         if (status != VXGE_HW_OK) {
4522                 vxge_debug_init(VXGE_ERR,
4523                         "Failed to initialize device (%d)", status);
4524                         ret = -EINVAL;
4525                         goto _exit3;
4526         }
4527
4528         if (VXGE_FW_VER(ll_config->device_hw_info.fw_version.major,
4529                         ll_config->device_hw_info.fw_version.minor,
4530                         ll_config->device_hw_info.fw_version.build) >=
4531             VXGE_EPROM_FW_VER) {
4532                 struct eprom_image img[VXGE_HW_MAX_ROM_IMAGES];
4533
4534                 status = vxge_hw_vpath_eprom_img_ver_get(hldev, img);
4535                 if (status != VXGE_HW_OK) {
4536                         vxge_debug_init(VXGE_ERR, "%s: Reading of EPROM failed",
4537                                         VXGE_DRIVER_NAME);
4538                         /* This is a non-fatal error, continue */
4539                 }
4540
4541                 for (i = 0; i < VXGE_HW_MAX_ROM_IMAGES; i++) {
4542                         hldev->eprom_versions[i] = img[i].version;
4543                         if (!img[i].is_valid)
4544                                 break;
4545                         vxge_debug_init(VXGE_TRACE, "%s: EPROM %d, version "
4546                                         "%d.%d.%d.%d", VXGE_DRIVER_NAME, i,
4547                                         VXGE_EPROM_IMG_MAJOR(img[i].version),
4548                                         VXGE_EPROM_IMG_MINOR(img[i].version),
4549                                         VXGE_EPROM_IMG_FIX(img[i].version),
4550                                         VXGE_EPROM_IMG_BUILD(img[i].version));
4551                 }
4552         }
4553
4554         /* if FCS stripping is not disabled in MAC fail driver load */
4555         status = vxge_hw_vpath_strip_fcs_check(hldev, vpath_mask);
4556         if (status != VXGE_HW_OK) {
4557                 vxge_debug_init(VXGE_ERR, "%s: FCS stripping is enabled in MAC"
4558                                 " failing driver load", VXGE_DRIVER_NAME);
4559                 ret = -EINVAL;
4560                 goto _exit4;
4561         }
4562
4563         /* Always enable HWTS.  This will always cause the FCS to be invalid,
4564          * due to the fact that HWTS is using the FCS as the location of the
4565          * timestamp.  The HW FCS checking will still correctly determine if
4566          * there is a valid checksum, and the FCS is being removed by the driver
4567          * anyway.  So no fucntionality is being lost.  Since it is always
4568          * enabled, we now simply use the ioctl call to set whether or not the
4569          * driver should be paying attention to the HWTS.
4570          */
4571         if (is_privileged == VXGE_HW_OK) {
4572                 status = vxge_timestamp_config(hldev);
4573                 if (status != VXGE_HW_OK) {
4574                         vxge_debug_init(VXGE_ERR, "%s: HWTS enable failed",
4575                                         VXGE_DRIVER_NAME);
4576                         ret = -EFAULT;
4577                         goto _exit4;
4578                 }
4579         }
4580
4581         vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
4582
4583         /* set private device info */
4584         pci_set_drvdata(pdev, hldev);
4585
4586         ll_config->fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
4587         ll_config->addr_learn_en = addr_learn_en;
4588         ll_config->rth_algorithm = RTH_ALG_JENKINS;
4589         ll_config->rth_hash_type_tcpipv4 = 1;
4590         ll_config->rth_hash_type_ipv4 = 0;
4591         ll_config->rth_hash_type_tcpipv6 = 0;
4592         ll_config->rth_hash_type_ipv6 = 0;
4593         ll_config->rth_hash_type_tcpipv6ex = 0;
4594         ll_config->rth_hash_type_ipv6ex = 0;
4595         ll_config->rth_bkt_sz = RTH_BUCKET_SIZE;
4596         ll_config->tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
4597         ll_config->rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
4598
4599         ret = vxge_device_register(hldev, ll_config, high_dma, no_of_vpath,
4600                                    &vdev);
4601         if (ret) {
4602                 ret = -EINVAL;
4603                 goto _exit4;
4604         }
4605
4606         ret = vxge_probe_fw_update(vdev);
4607         if (ret)
4608                 goto _exit5;
4609
4610         vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL);
4611         VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev),
4612                 vxge_hw_device_trace_level_get(hldev));
4613
4614         /* set private HW device info */
4615         vdev->mtu = VXGE_HW_DEFAULT_MTU;
4616         vdev->bar0 = attr.bar0;
4617         vdev->max_vpath_supported = max_vpath_supported;
4618         vdev->no_of_vpath = no_of_vpath;
4619
4620         /* Virtual Path count */
4621         for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
4622                 if (!vxge_bVALn(vpath_mask, i, 1))
4623                         continue;
4624                 if (j >= vdev->no_of_vpath)
4625                         break;
4626
4627                 vdev->vpaths[j].is_configured = 1;
4628                 vdev->vpaths[j].device_id = i;
4629                 vdev->vpaths[j].ring.driver_id = j;
4630                 vdev->vpaths[j].vdev = vdev;
4631                 vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath;
4632                 memcpy((u8 *)vdev->vpaths[j].macaddr,
4633                                 ll_config->device_hw_info.mac_addrs[i],
4634                                 ETH_ALEN);
4635
4636                 /* Initialize the mac address list header */
4637                 INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list);
4638
4639                 vdev->vpaths[j].mac_addr_cnt = 0;
4640                 vdev->vpaths[j].mcast_addr_cnt = 0;
4641                 j++;
4642         }
4643         vdev->exec_mode = VXGE_EXEC_MODE_DISABLE;
4644         vdev->max_config_port = max_config_port;
4645
4646         vdev->vlan_tag_strip = vlan_tag_strip;
4647
4648         /* map the hashing selector table to the configured vpaths */
4649         for (i = 0; i < vdev->no_of_vpath; i++)
4650                 vdev->vpath_selector[i] = vpath_selector[i];
4651
4652         macaddr = (u8 *)vdev->vpaths[0].macaddr;
4653
4654         ll_config->device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0';
4655         ll_config->device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0';
4656         ll_config->device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0';
4657
4658         vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s",
4659                 vdev->ndev->name, ll_config->device_hw_info.serial_number);
4660
4661         vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s",
4662                 vdev->ndev->name, ll_config->device_hw_info.part_number);
4663
4664         vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter",
4665                 vdev->ndev->name, ll_config->device_hw_info.product_desc);
4666
4667         vxge_debug_init(VXGE_TRACE, "%s: MAC ADDR: %pM",
4668                 vdev->ndev->name, macaddr);
4669
4670         vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d",
4671                 vdev->ndev->name, vxge_hw_device_link_width_get(hldev));
4672
4673         vxge_debug_init(VXGE_TRACE,
4674                 "%s: Firmware version : %s Date : %s", vdev->ndev->name,
4675                 ll_config->device_hw_info.fw_version.version,
4676                 ll_config->device_hw_info.fw_date.date);
4677
4678         if (new_device) {
4679                 switch (ll_config->device_hw_info.function_mode) {
4680                 case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
4681                         vxge_debug_init(VXGE_TRACE,
4682                         "%s: Single Function Mode Enabled", vdev->ndev->name);
4683                 break;
4684                 case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION:
4685                         vxge_debug_init(VXGE_TRACE,
4686                         "%s: Multi Function Mode Enabled", vdev->ndev->name);
4687                 break;
4688                 case VXGE_HW_FUNCTION_MODE_SRIOV:
4689                         vxge_debug_init(VXGE_TRACE,
4690                         "%s: Single Root IOV Mode Enabled", vdev->ndev->name);
4691                 break;
4692                 case VXGE_HW_FUNCTION_MODE_MRIOV:
4693                         vxge_debug_init(VXGE_TRACE,
4694                         "%s: Multi Root IOV Mode Enabled", vdev->ndev->name);
4695                 break;
4696                 }
4697         }
4698
4699         vxge_print_parm(vdev, vpath_mask);
4700
4701         /* Store the fw version for ethttool option */
4702         strcpy(vdev->fw_version, ll_config->device_hw_info.fw_version.version);
4703         memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN);
4704
4705         /* Copy the station mac address to the list */
4706         for (i = 0; i < vdev->no_of_vpath; i++) {
4707                 entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_KERNEL);
4708                 if (NULL == entry) {
4709                         vxge_debug_init(VXGE_ERR,
4710                                 "%s: mac_addr_list : memory allocation failed",
4711                                 vdev->ndev->name);
4712                         ret = -EPERM;
4713                         goto _exit6;
4714                 }
4715                 macaddr = (u8 *)&entry->macaddr;
4716                 memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN);
4717                 list_add(&entry->item, &vdev->vpaths[i].mac_addr_list);
4718                 vdev->vpaths[i].mac_addr_cnt = 1;
4719         }
4720
4721         kfree(device_config);
4722
4723         /*
4724          * INTA is shared in multi-function mode. This is unlike the INTA
4725          * implementation in MR mode, where each VH has its own INTA message.
4726          * - INTA is masked (disabled) as long as at least one function sets
4727          * its TITAN_MASK_ALL_INT.ALARM bit.
4728          * - INTA is unmasked (enabled) when all enabled functions have cleared
4729          * their own TITAN_MASK_ALL_INT.ALARM bit.
4730          * The TITAN_MASK_ALL_INT ALARM & TRAFFIC bits are cleared on power up.
4731          * Though this driver leaves the top level interrupts unmasked while
4732          * leaving the required module interrupt bits masked on exit, there
4733          * could be a rougue driver around that does not follow this procedure
4734          * resulting in a failure to generate interrupts. The following code is
4735          * present to prevent such a failure.
4736          */
4737
4738         if (ll_config->device_hw_info.function_mode ==
4739                 VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION)
4740                 if (vdev->config.intr_type == INTA)
4741                         vxge_hw_device_unmask_all(hldev);
4742
4743         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...",
4744                 vdev->ndev->name, __func__, __LINE__);
4745
4746         vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
4747         VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev),
4748                 vxge_hw_device_trace_level_get(hldev));
4749
4750         kfree(ll_config);
4751         return 0;
4752
4753 _exit6:
4754         for (i = 0; i < vdev->no_of_vpath; i++)
4755                 vxge_free_mac_add_list(&vdev->vpaths[i]);
4756 _exit5:
4757         vxge_device_unregister(hldev);
4758 _exit4:
4759         vxge_hw_device_terminate(hldev);
4760         pci_disable_sriov(pdev);
4761 _exit3:
4762         iounmap(attr.bar0);
4763 _exit2:
4764         pci_release_region(pdev, 0);
4765 _exit1:
4766         pci_disable_device(pdev);
4767 _exit0:
4768         kfree(ll_config);
4769         kfree(device_config);
4770         driver_config->config_dev_cnt--;
4771         driver_config->total_dev_cnt--;
4772         return ret;
4773 }
4774
4775 /**
4776  * vxge_rem_nic - Free the PCI device
4777  * @pdev: structure containing the PCI related information of the device.
4778  * Description: This function is called by the Pci subsystem to release a
4779  * PCI device and free up all resource held up by the device.
4780  */
4781 static void vxge_remove(struct pci_dev *pdev)
4782 {
4783         struct __vxge_hw_device *hldev;
4784         struct vxgedev *vdev;
4785         int i;
4786
4787         hldev = pci_get_drvdata(pdev);
4788         if (hldev == NULL)
4789                 return;
4790
4791         vdev = netdev_priv(hldev->ndev);
4792
4793         vxge_debug_entryexit(vdev->level_trace, "%s:%d", __func__, __LINE__);
4794         vxge_debug_init(vdev->level_trace, "%s : removing PCI device...",
4795                         __func__);
4796
4797         for (i = 0; i < vdev->no_of_vpath; i++)
4798                 vxge_free_mac_add_list(&vdev->vpaths[i]);
4799
4800         vxge_device_unregister(hldev);
4801         /* Do not call pci_disable_sriov here, as it will break child devices */
4802         vxge_hw_device_terminate(hldev);
4803         iounmap(vdev->bar0);
4804         pci_release_region(pdev, 0);
4805         pci_disable_device(pdev);
4806         driver_config->config_dev_cnt--;
4807         driver_config->total_dev_cnt--;
4808
4809         vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered",
4810                         __func__, __LINE__);
4811         vxge_debug_entryexit(vdev->level_trace, "%s:%d  Exiting...", __func__,
4812                              __LINE__);
4813 }
4814
4815 static const struct pci_error_handlers vxge_err_handler = {
4816         .error_detected = vxge_io_error_detected,
4817         .slot_reset = vxge_io_slot_reset,
4818         .resume = vxge_io_resume,
4819 };
4820
4821 static struct pci_driver vxge_driver = {
4822         .name = VXGE_DRIVER_NAME,
4823         .id_table = vxge_id_table,
4824         .probe = vxge_probe,
4825         .remove = vxge_remove,
4826 #ifdef CONFIG_PM
4827         .suspend = vxge_pm_suspend,
4828         .resume = vxge_pm_resume,
4829 #endif
4830         .err_handler = &vxge_err_handler,
4831 };
4832
4833 static int __init
4834 vxge_starter(void)
4835 {
4836         int ret = 0;
4837
4838         pr_info("Copyright(c) 2002-2010 Exar Corp.\n");
4839         pr_info("Driver version: %s\n", DRV_VERSION);
4840
4841         verify_bandwidth();
4842
4843         driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL);
4844         if (!driver_config)
4845                 return -ENOMEM;
4846
4847         ret = pci_register_driver(&vxge_driver);
4848         if (ret) {
4849                 kfree(driver_config);
4850                 goto err;
4851         }
4852
4853         if (driver_config->config_dev_cnt &&
4854            (driver_config->config_dev_cnt != driver_config->total_dev_cnt))
4855                 vxge_debug_init(VXGE_ERR,
4856                         "%s: Configured %d of %d devices",
4857                         VXGE_DRIVER_NAME, driver_config->config_dev_cnt,
4858                         driver_config->total_dev_cnt);
4859 err:
4860         return ret;
4861 }
4862
4863 static void __exit
4864 vxge_closer(void)
4865 {
4866         pci_unregister_driver(&vxge_driver);
4867         kfree(driver_config);
4868 }
4869 module_init(vxge_starter);
4870 module_exit(vxge_closer);