Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / ethernet / mellanox / mlx4 / en_main.c
1 /*
2  * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  *
32  */
33
34 #include <linux/cpumask.h>
35 #include <linux/module.h>
36 #include <linux/delay.h>
37 #include <linux/netdevice.h>
38 #include <linux/slab.h>
39
40 #include <linux/mlx4/driver.h>
41 #include <linux/mlx4/device.h>
42 #include <linux/mlx4/cmd.h>
43
44 #include "mlx4_en.h"
45
46 MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin");
47 MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver");
48 MODULE_LICENSE("Dual BSD/GPL");
49 MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")");
50
51 static const char mlx4_en_version[] =
52         DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v"
53         DRV_VERSION " (" DRV_RELDATE ")\n";
54
55 #define MLX4_EN_PARM_INT(X, def_val, desc) \
56         static unsigned int X = def_val;\
57         module_param(X , uint, 0444); \
58         MODULE_PARM_DESC(X, desc);
59
60
61 /*
62  * Device scope module parameters
63  */
64
65 /* Enable RSS UDP traffic */
66 MLX4_EN_PARM_INT(udp_rss, 1,
67                  "Enable RSS for incoming UDP traffic or disabled (0)");
68
69 /* Priority pausing */
70 MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
71                            " Per priority bit mask");
72 MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
73                            " Per priority bit mask");
74
75 MLX4_EN_PARM_INT(inline_thold, MAX_INLINE,
76                  "Threshold for using inline data (range: 17-104, default: 104)");
77
78 #define MAX_PFC_TX     0xff
79 #define MAX_PFC_RX     0xff
80
81 void en_print(const char *level, const struct mlx4_en_priv *priv,
82               const char *format, ...)
83 {
84         va_list args;
85         struct va_format vaf;
86
87         va_start(args, format);
88
89         vaf.fmt = format;
90         vaf.va = &args;
91         if (priv->registered)
92                 printk("%s%s: %s: %pV",
93                        level, DRV_NAME, priv->dev->name, &vaf);
94         else
95                 printk("%s%s: %s: Port %d: %pV",
96                        level, DRV_NAME, dev_name(&priv->mdev->pdev->dev),
97                        priv->port, &vaf);
98         va_end(args);
99 }
100
101 void mlx4_en_update_loopback_state(struct net_device *dev,
102                                    netdev_features_t features)
103 {
104         struct mlx4_en_priv *priv = netdev_priv(dev);
105
106         if (features & NETIF_F_LOOPBACK)
107                 priv->ctrl_flags |= cpu_to_be32(MLX4_WQE_CTRL_FORCE_LOOPBACK);
108         else
109                 priv->ctrl_flags &= cpu_to_be32(~MLX4_WQE_CTRL_FORCE_LOOPBACK);
110
111         priv->flags &= ~(MLX4_EN_FLAG_RX_FILTER_NEEDED|
112                         MLX4_EN_FLAG_ENABLE_HW_LOOPBACK);
113
114         /* Drop the packet if SRIOV is not enabled
115          * and not performing the selftest or flb disabled
116          */
117         if (mlx4_is_mfunc(priv->mdev->dev) &&
118             !(features & NETIF_F_LOOPBACK) && !priv->validate_loopback)
119                 priv->flags |= MLX4_EN_FLAG_RX_FILTER_NEEDED;
120
121         /* Set dmac in Tx WQE if we are in SRIOV mode or if loopback selftest
122          * is requested
123          */
124         if (mlx4_is_mfunc(priv->mdev->dev) || priv->validate_loopback)
125                 priv->flags |= MLX4_EN_FLAG_ENABLE_HW_LOOPBACK;
126 }
127
128 static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
129 {
130         struct mlx4_en_profile *params = &mdev->profile;
131         int i;
132
133         params->udp_rss = udp_rss;
134         params->num_tx_rings_p_up = mlx4_low_memory_profile() ?
135                 MLX4_EN_MIN_TX_RING_P_UP :
136                 min_t(int, num_online_cpus(), MLX4_EN_MAX_TX_RING_P_UP);
137
138         if (params->udp_rss && !(mdev->dev->caps.flags
139                                         & MLX4_DEV_CAP_FLAG_UDP_RSS)) {
140                 mlx4_warn(mdev, "UDP RSS is not supported on this device\n");
141                 params->udp_rss = 0;
142         }
143         for (i = 1; i <= MLX4_MAX_PORTS; i++) {
144                 params->prof[i].rx_pause = 1;
145                 params->prof[i].rx_ppp = pfcrx;
146                 params->prof[i].tx_pause = 1;
147                 params->prof[i].tx_ppp = pfctx;
148                 params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
149                 params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
150                 params->prof[i].tx_ring_num = params->num_tx_rings_p_up *
151                         MLX4_EN_NUM_UP;
152                 params->prof[i].rss_rings = 0;
153                 params->prof[i].inline_thold = inline_thold;
154         }
155
156         return 0;
157 }
158
159 static void *mlx4_en_get_netdev(struct mlx4_dev *dev, void *ctx, u8 port)
160 {
161         struct mlx4_en_dev *endev = ctx;
162
163         return endev->pndev[port];
164 }
165
166 static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
167                           enum mlx4_dev_event event, unsigned long port)
168 {
169         struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr;
170         struct mlx4_en_priv *priv;
171
172         switch (event) {
173         case MLX4_DEV_EVENT_PORT_UP:
174         case MLX4_DEV_EVENT_PORT_DOWN:
175                 if (!mdev->pndev[port])
176                         return;
177                 priv = netdev_priv(mdev->pndev[port]);
178                 /* To prevent races, we poll the link state in a separate
179                   task rather than changing it here */
180                 priv->link_state = event;
181                 queue_work(mdev->workqueue, &priv->linkstate_task);
182                 break;
183
184         case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
185                 mlx4_err(mdev, "Internal error detected, restarting device\n");
186                 break;
187
188         case MLX4_DEV_EVENT_SLAVE_INIT:
189         case MLX4_DEV_EVENT_SLAVE_SHUTDOWN:
190                 break;
191         default:
192                 if (port < 1 || port > dev->caps.num_ports ||
193                     !mdev->pndev[port])
194                         return;
195                 mlx4_warn(mdev, "Unhandled event %d for port %d\n", event,
196                           (int) port);
197         }
198 }
199
200 static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr)
201 {
202         struct mlx4_en_dev *mdev = endev_ptr;
203         int i;
204
205         mutex_lock(&mdev->state_lock);
206         mdev->device_up = false;
207         mutex_unlock(&mdev->state_lock);
208
209         mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
210                 if (mdev->pndev[i])
211                         mlx4_en_destroy_netdev(mdev->pndev[i]);
212
213         if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS)
214                 mlx4_en_remove_timestamp(mdev);
215
216         flush_workqueue(mdev->workqueue);
217         destroy_workqueue(mdev->workqueue);
218         (void) mlx4_mr_free(dev, &mdev->mr);
219         iounmap(mdev->uar_map);
220         mlx4_uar_free(dev, &mdev->priv_uar);
221         mlx4_pd_free(dev, mdev->priv_pdn);
222         if (mdev->nb.notifier_call)
223                 unregister_netdevice_notifier(&mdev->nb);
224         kfree(mdev);
225 }
226
227 static void *mlx4_en_add(struct mlx4_dev *dev)
228 {
229         struct mlx4_en_dev *mdev;
230         int i;
231
232         printk_once(KERN_INFO "%s", mlx4_en_version);
233
234         mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
235         if (!mdev)
236                 goto err_free_res;
237
238         if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
239                 goto err_free_dev;
240
241         if (mlx4_uar_alloc(dev, &mdev->priv_uar))
242                 goto err_pd;
243
244         mdev->uar_map = ioremap((phys_addr_t) mdev->priv_uar.pfn << PAGE_SHIFT,
245                                 PAGE_SIZE);
246         if (!mdev->uar_map)
247                 goto err_uar;
248         spin_lock_init(&mdev->uar_lock);
249
250         mdev->dev = dev;
251         mdev->dma_device = &dev->persist->pdev->dev;
252         mdev->pdev = dev->persist->pdev;
253         mdev->device_up = false;
254
255         mdev->LSO_support = !!(dev->caps.flags & (1 << 15));
256         if (!mdev->LSO_support)
257                 mlx4_warn(mdev, "LSO not supported, please upgrade to later FW version to enable LSO\n");
258
259         if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull,
260                          MLX4_PERM_LOCAL_WRITE |  MLX4_PERM_LOCAL_READ,
261                          0, 0, &mdev->mr)) {
262                 mlx4_err(mdev, "Failed allocating memory region\n");
263                 goto err_map;
264         }
265         if (mlx4_mr_enable(mdev->dev, &mdev->mr)) {
266                 mlx4_err(mdev, "Failed enabling memory region\n");
267                 goto err_mr;
268         }
269
270         /* Build device profile according to supplied module parameters */
271         if (mlx4_en_get_profile(mdev)) {
272                 mlx4_err(mdev, "Bad module parameters, aborting\n");
273                 goto err_mr;
274         }
275
276         /* Configure which ports to start according to module parameters */
277         mdev->port_cnt = 0;
278         mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
279                 mdev->port_cnt++;
280
281         /* Initialize time stamp mechanism */
282         if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS)
283                 mlx4_en_init_timestamp(mdev);
284
285         /* Set default number of RX rings*/
286         mlx4_en_set_num_rx_rings(mdev);
287
288         /* Create our own workqueue for reset/multicast tasks
289          * Note: we cannot use the shared workqueue because of deadlocks caused
290          *       by the rtnl lock */
291         mdev->workqueue = create_singlethread_workqueue("mlx4_en");
292         if (!mdev->workqueue)
293                 goto err_mr;
294
295         /* At this stage all non-port specific tasks are complete:
296          * mark the card state as up */
297         mutex_init(&mdev->state_lock);
298         mdev->device_up = true;
299
300         /* Setup ports */
301
302         /* Create a netdev for each port */
303         mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
304                 mlx4_info(mdev, "Activating port:%d\n", i);
305                 if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i]))
306                         mdev->pndev[i] = NULL;
307         }
308         /* register notifier */
309         mdev->nb.notifier_call = mlx4_en_netdev_event;
310         if (register_netdevice_notifier(&mdev->nb)) {
311                 mdev->nb.notifier_call = NULL;
312                 mlx4_err(mdev, "Failed to create notifier\n");
313         }
314
315         return mdev;
316
317 err_mr:
318         (void) mlx4_mr_free(dev, &mdev->mr);
319 err_map:
320         if (mdev->uar_map)
321                 iounmap(mdev->uar_map);
322 err_uar:
323         mlx4_uar_free(dev, &mdev->priv_uar);
324 err_pd:
325         mlx4_pd_free(dev, mdev->priv_pdn);
326 err_free_dev:
327         kfree(mdev);
328 err_free_res:
329         return NULL;
330 }
331
332 static struct mlx4_interface mlx4_en_interface = {
333         .add            = mlx4_en_add,
334         .remove         = mlx4_en_remove,
335         .event          = mlx4_en_event,
336         .get_dev        = mlx4_en_get_netdev,
337         .protocol       = MLX4_PROT_ETH,
338 };
339
340 static void mlx4_en_verify_params(void)
341 {
342         if (pfctx > MAX_PFC_TX) {
343                 pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
344                         pfctx, MAX_PFC_TX);
345                 pfctx = 0;
346         }
347
348         if (pfcrx > MAX_PFC_RX) {
349                 pr_warn("mlx4_en: WARNING: illegal module parameter pfcrx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
350                         pfcrx, MAX_PFC_RX);
351                 pfcrx = 0;
352         }
353
354         if (inline_thold < MIN_PKT_LEN || inline_thold > MAX_INLINE) {
355                 pr_warn("mlx4_en: WARNING: illegal module parameter inline_thold %d - should be in range %d-%d, will be changed to default (%d)\n",
356                         inline_thold, MIN_PKT_LEN, MAX_INLINE, MAX_INLINE);
357                 inline_thold = MAX_INLINE;
358         }
359 }
360
361 static int __init mlx4_en_init(void)
362 {
363         mlx4_en_verify_params();
364
365         return mlx4_register_interface(&mlx4_en_interface);
366 }
367
368 static void __exit mlx4_en_cleanup(void)
369 {
370         mlx4_unregister_interface(&mlx4_en_interface);
371 }
372
373 module_init(mlx4_en_init);
374 module_exit(mlx4_en_cleanup);
375