Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / ethernet / intel / igbvf / defines.h
1 /*******************************************************************************
2
3   Intel(R) 82576 Virtual Function Linux driver
4   Copyright(c) 1999 - 2012 Intel Corporation.
5
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, see <http://www.gnu.org/licenses/>.
17
18   The full GNU General Public License is included in this distribution in
19   the file called "COPYING".
20
21   Contact Information:
22   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
23   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24
25 *******************************************************************************/
26
27 #ifndef _E1000_DEFINES_H_
28 #define _E1000_DEFINES_H_
29
30 /* Number of Transmit and Receive Descriptors must be a multiple of 8 */
31 #define REQ_TX_DESCRIPTOR_MULTIPLE      8
32 #define REQ_RX_DESCRIPTOR_MULTIPLE      8
33
34 /* IVAR valid bit */
35 #define E1000_IVAR_VALID        0x80
36
37 /* Receive Descriptor bit definitions */
38 #define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
39 #define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
40 #define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
41 #define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
42 #define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
43 #define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
44 #define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
45 #define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
46 #define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
47
48 #define E1000_RXDEXT_STATERR_LB 0x00040000
49 #define E1000_RXDEXT_STATERR_CE 0x01000000
50 #define E1000_RXDEXT_STATERR_SE 0x02000000
51 #define E1000_RXDEXT_STATERR_SEQ        0x04000000
52 #define E1000_RXDEXT_STATERR_CXE        0x10000000
53 #define E1000_RXDEXT_STATERR_TCPE       0x20000000
54 #define E1000_RXDEXT_STATERR_IPE        0x40000000
55 #define E1000_RXDEXT_STATERR_RXE        0x80000000
56
57 /* Same mask, but for extended and packet split descriptors */
58 #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
59         E1000_RXDEXT_STATERR_CE  | \
60         E1000_RXDEXT_STATERR_SE  | \
61         E1000_RXDEXT_STATERR_SEQ | \
62         E1000_RXDEXT_STATERR_CXE | \
63         E1000_RXDEXT_STATERR_RXE)
64
65 /* Device Control */
66 #define E1000_CTRL_RST          0x04000000  /* Global reset */
67
68 /* Device Status */
69 #define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
70 #define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
71 #define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
72 #define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
73 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
74 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
75
76 #define SPEED_10        10
77 #define SPEED_100       100
78 #define SPEED_1000      1000
79 #define HALF_DUPLEX     1
80 #define FULL_DUPLEX     2
81
82 /* Transmit Descriptor bit definitions */
83 #define E1000_TXD_POPTS_IXSM    0x01       /* Insert IP checksum */
84 #define E1000_TXD_POPTS_TXSM    0x02       /* Insert TCP/UDP checksum */
85 #define E1000_TXD_CMD_DEXT      0x20000000 /* Desc extension (0 = legacy) */
86 #define E1000_TXD_STAT_DD       0x00000001 /* Desc Done */
87
88 #define MAX_JUMBO_FRAME_SIZE    0x3F00
89
90 /* 802.1q VLAN Packet Size */
91 #define VLAN_TAG_SIZE           4    /* 802.3ac tag (not DMA'd) */
92
93 /* Error Codes */
94 #define E1000_SUCCESS           0
95 #define E1000_ERR_CONFIG        3
96 #define E1000_ERR_MAC_INIT      5
97 #define E1000_ERR_MBX           15
98
99 /* SRRCTL bit definitions */
100 #define E1000_SRRCTL_BSIZEPKT_SHIFT             10 /* Shift _right_ */
101 #define E1000_SRRCTL_BSIZEHDRSIZE_MASK          0x00000F00
102 #define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT         2  /* Shift _left_ */
103 #define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF        0x02000000
104 #define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS  0x0A000000
105 #define E1000_SRRCTL_DESCTYPE_MASK              0x0E000000
106 #define E1000_SRRCTL_DROP_EN                    0x80000000
107
108 #define E1000_SRRCTL_BSIZEPKT_MASK      0x0000007F
109 #define E1000_SRRCTL_BSIZEHDR_MASK      0x00003F00
110
111 /* Additional Descriptor Control definitions */
112 #define E1000_TXDCTL_QUEUE_ENABLE       0x02000000 /* Enable specific Tx Que */
113 #define E1000_RXDCTL_QUEUE_ENABLE       0x02000000 /* Enable specific Rx Que */
114
115 /* Direct Cache Access (DCA) definitions */
116 #define E1000_DCA_TXCTRL_TX_WB_RO_EN    (1 << 11) /* Tx Desc writeback RO bit */
117
118 #define E1000_VF_INIT_TIMEOUT   200 /* Number of retries to clear RSTI */
119
120 #endif /* _E1000_DEFINES_H_ */