Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / ethernet / amd / hplance.c
1 /* hplance.c  : the  Linux/hp300/lance ethernet driver
2  *
3  * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
4  * Based on the Sun Lance driver and the NetBSD HP Lance driver
5  * Uses the generic 7990.c LANCE code.
6  */
7
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/types.h>
11 #include <linux/interrupt.h>
12 #include <linux/ioport.h>
13 #include <linux/string.h>
14 #include <linux/delay.h>
15 #include <linux/init.h>
16 #include <linux/errno.h>
17 /* Used for the temporal inet entries and routing */
18 #include <linux/socket.h>
19 #include <linux/route.h>
20 #include <linux/dio.h>
21 #include <linux/netdevice.h>
22 #include <linux/etherdevice.h>
23 #include <linux/skbuff.h>
24
25 #include <asm/io.h>
26 #include <asm/pgtable.h>
27
28 #include "hplance.h"
29
30 /* We have 16392 bytes of RAM for the init block and buffers. This places
31  * an upper limit on the number of buffers we can use. NetBSD uses 8 Rx
32  * buffers and 2 Tx buffers, it takes (8 + 2) * 1544 bytes.
33  */
34 #define LANCE_LOG_TX_BUFFERS 1
35 #define LANCE_LOG_RX_BUFFERS 3
36
37 #include "7990.h"                                 /* use generic LANCE code */
38
39 /* Our private data structure */
40 struct hplance_private {
41         struct lance_private lance;
42 };
43
44 /* function prototypes... This is easy because all the grot is in the
45  * generic LANCE support. All we have to support is probing for boards,
46  * plus board-specific init, open and close actions.
47  * Oh, and we need to tell the generic code how to read and write LANCE registers...
48  */
49 static int hplance_init_one(struct dio_dev *d, const struct dio_device_id *ent);
50 static void hplance_init(struct net_device *dev, struct dio_dev *d);
51 static void hplance_remove_one(struct dio_dev *d);
52 static void hplance_writerap(void *priv, unsigned short value);
53 static void hplance_writerdp(void *priv, unsigned short value);
54 static unsigned short hplance_readrdp(void *priv);
55 static int hplance_open(struct net_device *dev);
56 static int hplance_close(struct net_device *dev);
57
58 static struct dio_device_id hplance_dio_tbl[] = {
59         { DIO_ID_LAN },
60         { 0 }
61 };
62
63 static struct dio_driver hplance_driver = {
64         .name      = "hplance",
65         .id_table  = hplance_dio_tbl,
66         .probe     = hplance_init_one,
67         .remove    = hplance_remove_one,
68 };
69
70 static const struct net_device_ops hplance_netdev_ops = {
71         .ndo_open               = hplance_open,
72         .ndo_stop               = hplance_close,
73         .ndo_start_xmit         = lance_start_xmit,
74         .ndo_set_rx_mode        = lance_set_multicast,
75         .ndo_change_mtu         = eth_change_mtu,
76         .ndo_validate_addr      = eth_validate_addr,
77         .ndo_set_mac_address    = eth_mac_addr,
78 #ifdef CONFIG_NET_POLL_CONTROLLER
79         .ndo_poll_controller    = lance_poll,
80 #endif
81 };
82
83 /* Find all the HP Lance boards and initialise them... */
84 static int hplance_init_one(struct dio_dev *d, const struct dio_device_id *ent)
85 {
86         struct net_device *dev;
87         int err = -ENOMEM;
88
89         dev = alloc_etherdev(sizeof(struct hplance_private));
90         if (!dev)
91                 goto out;
92
93         err = -EBUSY;
94         if (!request_mem_region(dio_resource_start(d),
95                                 dio_resource_len(d), d->name))
96                 goto out_free_netdev;
97
98         hplance_init(dev, d);
99         err = register_netdev(dev);
100         if (err)
101                 goto out_release_mem_region;
102
103         dio_set_drvdata(d, dev);
104
105         printk(KERN_INFO "%s: %s; select code %d, addr %pM, irq %d\n",
106                dev->name, d->name, d->scode, dev->dev_addr, d->ipl);
107
108         return 0;
109
110  out_release_mem_region:
111         release_mem_region(dio_resource_start(d), dio_resource_len(d));
112  out_free_netdev:
113         free_netdev(dev);
114  out:
115         return err;
116 }
117
118 static void hplance_remove_one(struct dio_dev *d)
119 {
120         struct net_device *dev = dio_get_drvdata(d);
121
122         unregister_netdev(dev);
123         release_mem_region(dio_resource_start(d), dio_resource_len(d));
124         free_netdev(dev);
125 }
126
127 /* Initialise a single lance board at the given DIO device */
128 static void hplance_init(struct net_device *dev, struct dio_dev *d)
129 {
130         unsigned long va = (d->resource.start + DIO_VIRADDRBASE);
131         struct hplance_private *lp;
132         int i;
133
134         /* reset the board */
135         out_8(va + DIO_IDOFF, 0xff);
136         udelay(100);                              /* ariba! ariba! udelay! udelay! */
137
138         /* Fill the dev fields */
139         dev->base_addr = va;
140         dev->netdev_ops = &hplance_netdev_ops;
141         dev->dma = 0;
142
143         for (i = 0; i < 6; i++) {
144                 /* The NVRAM holds our ethernet address, one nibble per byte,
145                  * at bytes NVRAMOFF+1,3,5,7,9...
146                  */
147                 dev->dev_addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)
148                         | (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);
149         }
150
151         lp = netdev_priv(dev);
152         lp->lance.name = d->name;
153         lp->lance.base = va;
154         lp->lance.init_block = (struct lance_init_block *)(va + HPLANCE_MEMOFF); /* CPU addr */
155         lp->lance.lance_init_block = NULL;              /* LANCE addr of same RAM */
156         lp->lance.busmaster_regval = LE_C3_BSWP;        /* we're bigendian */
157         lp->lance.irq = d->ipl;
158         lp->lance.writerap = hplance_writerap;
159         lp->lance.writerdp = hplance_writerdp;
160         lp->lance.readrdp = hplance_readrdp;
161         lp->lance.lance_log_rx_bufs = LANCE_LOG_RX_BUFFERS;
162         lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;
163         lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;
164         lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
165 }
166
167 /* This is disgusting. We have to check the DIO status register for ack every
168  * time we read or write the LANCE registers.
169  */
170 static void hplance_writerap(void *priv, unsigned short value)
171 {
172         struct lance_private *lp = (struct lance_private *)priv;
173         do {
174                 out_be16(lp->base + HPLANCE_REGOFF + LANCE_RAP, value);
175         } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
176 }
177
178 static void hplance_writerdp(void *priv, unsigned short value)
179 {
180         struct lance_private *lp = (struct lance_private *)priv;
181         do {
182                 out_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP, value);
183         } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
184 }
185
186 static unsigned short hplance_readrdp(void *priv)
187 {
188         struct lance_private *lp = (struct lance_private *)priv;
189         __u16 value;
190         do {
191                 value = in_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP);
192         } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
193         return value;
194 }
195
196 static int hplance_open(struct net_device *dev)
197 {
198         int status;
199         struct lance_private *lp = netdev_priv(dev);
200
201         status = lance_open(dev);                 /* call generic lance open code */
202         if (status)
203                 return status;
204         /* enable interrupts at board level. */
205         out_8(lp->base + HPLANCE_STATUS, LE_IE);
206
207         return 0;
208 }
209
210 static int hplance_close(struct net_device *dev)
211 {
212         struct lance_private *lp = netdev_priv(dev);
213
214         out_8(lp->base + HPLANCE_STATUS, 0);    /* disable interrupts at boardlevel */
215         lance_close(dev);
216         return 0;
217 }
218
219 static int __init hplance_init_module(void)
220 {
221         return dio_register_driver(&hplance_driver);
222 }
223
224 static void __exit hplance_cleanup_module(void)
225 {
226         dio_unregister_driver(&hplance_driver);
227 }
228
229 module_init(hplance_init_module);
230 module_exit(hplance_cleanup_module);
231
232 MODULE_LICENSE("GPL");