kernel/drivers/net/can/grcan.c

   1 /*
   2  * Socket CAN driver for Aeroflex Gaisler GRCAN and GRHCAN.
   3  *
   4  * 2012 (c) Aeroflex Gaisler AB
   5  *
   6  * This driver supports GRCAN and GRHCAN CAN controllers available in the GRLIB
   7  * VHDL IP core library.
   8  *
   9  * Full documentation of the GRCAN core can be found here:
  10  * http://www.gaisler.com/products/grlib/grip.pdf
  11  *
  12  * See "Documentation/devicetree/bindings/net/can/grcan.txt" for information on
  13  * open firmware properties.
  14  *
  15  * See "Documentation/ABI/testing/sysfs-class-net-grcan" for information on the
  16  * sysfs interface.
  17  *
  18  * See "Documentation/kernel-parameters.txt" for information on the module
  19  * parameters.
  20  *
  21  * This program is free software; you can redistribute it and/or modify it
  22  * under the terms of the GNU General Public License as published by the
  23  * Free Software Foundation; either version 2 of the License, or (at your
  24  * option) any later version.
  25  *
  26  * Contributors: Andreas Larsson <andreas@gaisler.com>
  27  */
  28
  29 #include <linux/kernel.h>
  30 #include <linux/module.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/netdevice.h>
  33 #include <linux/delay.h>
  34 #include <linux/io.h>
  35 #include <linux/can/dev.h>
  36 #include <linux/spinlock.h>
  37 #include <linux/of_platform.h>
  38 #include <linux/of_irq.h>
  39
  40 #include <linux/dma-mapping.h>
  41
  42 #define DRV_NAME        "grcan"
  43
  44 #define GRCAN_NAPI_WEIGHT       32
  45
  46 #define GRCAN_RESERVE_SIZE(slot1, slot2) (((slot2) - (slot1)) / 4 - 1)
  47
  48 struct grcan_registers {
  49         u32 conf;       /* 0x00 */
  50         u32 stat;       /* 0x04 */
  51         u32 ctrl;       /* 0x08 */
  52         u32 __reserved1[GRCAN_RESERVE_SIZE(0x08, 0x18)];
  53         u32 smask;      /* 0x18 - CanMASK */
  54         u32 scode;      /* 0x1c - CanCODE */
  55         u32 __reserved2[GRCAN_RESERVE_SIZE(0x1c, 0x100)];
  56         u32 pimsr;      /* 0x100 */
  57         u32 pimr;       /* 0x104 */
  58         u32 pisr;       /* 0x108 */
  59         u32 pir;        /* 0x10C */
  60         u32 imr;        /* 0x110 */
  61         u32 picr;       /* 0x114 */
  62         u32 __reserved3[GRCAN_RESERVE_SIZE(0x114, 0x200)];
  63         u32 txctrl;     /* 0x200 */
  64         u32 txaddr;     /* 0x204 */
  65         u32 txsize;     /* 0x208 */
  66         u32 txwr;       /* 0x20C */
  67         u32 txrd;       /* 0x210 */
  68         u32 txirq;      /* 0x214 */
  69         u32 __reserved4[GRCAN_RESERVE_SIZE(0x214, 0x300)];
  70         u32 rxctrl;     /* 0x300 */
  71         u32 rxaddr;     /* 0x304 */
  72         u32 rxsize;     /* 0x308 */
  73         u32 rxwr;       /* 0x30C */
  74         u32 rxrd;       /* 0x310 */
  75         u32 rxirq;      /* 0x314 */
  76         u32 rxmask;     /* 0x318 */
  77         u32 rxcode;     /* 0x31C */
  78 };
  79
  80 #define GRCAN_CONF_ABORT        0x00000001
  81 #define GRCAN_CONF_ENABLE0      0x00000002
  82 #define GRCAN_CONF_ENABLE1      0x00000004
  83 #define GRCAN_CONF_SELECT       0x00000008
  84 #define GRCAN_CONF_SILENT       0x00000010
  85 #define GRCAN_CONF_SAM          0x00000020 /* Available in some hardware */
  86 #define GRCAN_CONF_BPR          0x00000300 /* Note: not BRP */
  87 #define GRCAN_CONF_RSJ          0x00007000
  88 #define GRCAN_CONF_PS1          0x00f00000
  89 #define GRCAN_CONF_PS2          0x000f0000
  90 #define GRCAN_CONF_SCALER       0xff000000
  91 #define GRCAN_CONF_OPERATION                                            \
  92         (GRCAN_CONF_ABORT | GRCAN_CONF_ENABLE0 | GRCAN_CONF_ENABLE1     \
  93          | GRCAN_CONF_SELECT | GRCAN_CONF_SILENT | GRCAN_CONF_SAM)
  94 #define GRCAN_CONF_TIMING                                               \
  95         (GRCAN_CONF_BPR | GRCAN_CONF_RSJ | GRCAN_CONF_PS1               \
  96          | GRCAN_CONF_PS2 | GRCAN_CONF_SCALER)
  97
  98 #define GRCAN_CONF_RSJ_MIN      1
  99 #define GRCAN_CONF_RSJ_MAX      4
 100 #define GRCAN_CONF_PS1_MIN      1
 101 #define GRCAN_CONF_PS1_MAX      15
 102 #define GRCAN_CONF_PS2_MIN      2
 103 #define GRCAN_CONF_PS2_MAX      8
 104 #define GRCAN_CONF_SCALER_MIN   0
 105 #define GRCAN_CONF_SCALER_MAX   255
 106 #define GRCAN_CONF_SCALER_INC   1
 107
 108 #define GRCAN_CONF_BPR_BIT      8
 109 #define GRCAN_CONF_RSJ_BIT      12
 110 #define GRCAN_CONF_PS1_BIT      20
 111 #define GRCAN_CONF_PS2_BIT      16
 112 #define GRCAN_CONF_SCALER_BIT   24
 113
 114 #define GRCAN_STAT_PASS         0x000001
 115 #define GRCAN_STAT_OFF          0x000002
 116 #define GRCAN_STAT_OR           0x000004
 117 #define GRCAN_STAT_AHBERR       0x000008
 118 #define GRCAN_STAT_ACTIVE       0x000010
 119 #define GRCAN_STAT_RXERRCNT     0x00ff00
 120 #define GRCAN_STAT_TXERRCNT     0xff0000
 121
 122 #define GRCAN_STAT_ERRCTR_RELATED       (GRCAN_STAT_PASS | GRCAN_STAT_OFF)
 123
 124 #define GRCAN_STAT_RXERRCNT_BIT 8
 125 #define GRCAN_STAT_TXERRCNT_BIT 16
 126
 127 #define GRCAN_STAT_ERRCNT_WARNING_LIMIT 96
 128 #define GRCAN_STAT_ERRCNT_PASSIVE_LIMIT 127
 129
 130 #define GRCAN_CTRL_RESET        0x2
 131 #define GRCAN_CTRL_ENABLE       0x1
 132
 133 #define GRCAN_TXCTRL_ENABLE     0x1
 134 #define GRCAN_TXCTRL_ONGOING    0x2
 135 #define GRCAN_TXCTRL_SINGLE     0x4
 136
 137 #define GRCAN_RXCTRL_ENABLE     0x1
 138 #define GRCAN_RXCTRL_ONGOING    0x2
 139
 140 /* Relative offset of IRQ sources to AMBA Plug&Play */
 141 #define GRCAN_IRQIX_IRQ         0
 142 #define GRCAN_IRQIX_TXSYNC      1
 143 #define GRCAN_IRQIX_RXSYNC      2
 144
 145 #define GRCAN_IRQ_PASS          0x00001
 146 #define GRCAN_IRQ_OFF           0x00002
 147 #define GRCAN_IRQ_OR            0x00004
 148 #define GRCAN_IRQ_RXAHBERR      0x00008
 149 #define GRCAN_IRQ_TXAHBERR      0x00010
 150 #define GRCAN_IRQ_RXIRQ         0x00020
 151 #define GRCAN_IRQ_TXIRQ         0x00040
 152 #define GRCAN_IRQ_RXFULL        0x00080
 153 #define GRCAN_IRQ_TXEMPTY       0x00100
 154 #define GRCAN_IRQ_RX            0x00200
 155 #define GRCAN_IRQ_TX            0x00400
 156 #define GRCAN_IRQ_RXSYNC        0x00800
 157 #define GRCAN_IRQ_TXSYNC        0x01000
 158 #define GRCAN_IRQ_RXERRCTR      0x02000
 159 #define GRCAN_IRQ_TXERRCTR      0x04000
 160 #define GRCAN_IRQ_RXMISS        0x08000
 161 #define GRCAN_IRQ_TXLOSS        0x10000
 162
 163 #define GRCAN_IRQ_NONE  0
 164 #define GRCAN_IRQ_ALL                                                   \
 165         (GRCAN_IRQ_PASS | GRCAN_IRQ_OFF | GRCAN_IRQ_OR                  \
 166          | GRCAN_IRQ_RXAHBERR | GRCAN_IRQ_TXAHBERR                      \
 167          | GRCAN_IRQ_RXIRQ | GRCAN_IRQ_TXIRQ                            \
 168          | GRCAN_IRQ_RXFULL | GRCAN_IRQ_TXEMPTY                         \
 169          | GRCAN_IRQ_RX | GRCAN_IRQ_TX | GRCAN_IRQ_RXSYNC               \
 170          | GRCAN_IRQ_TXSYNC | GRCAN_IRQ_RXERRCTR                        \
 171          | GRCAN_IRQ_TXERRCTR | GRCAN_IRQ_RXMISS                        \
 172          | GRCAN_IRQ_TXLOSS)
 173
 174 #define GRCAN_IRQ_ERRCTR_RELATED (GRCAN_IRQ_RXERRCTR | GRCAN_IRQ_TXERRCTR \
 175                                   | GRCAN_IRQ_PASS | GRCAN_IRQ_OFF)
 176 #define GRCAN_IRQ_ERRORS (GRCAN_IRQ_ERRCTR_RELATED | GRCAN_IRQ_OR       \
 177                           | GRCAN_IRQ_TXAHBERR | GRCAN_IRQ_RXAHBERR     \
 178                           | GRCAN_IRQ_TXLOSS)
 179 #define GRCAN_IRQ_DEFAULT (GRCAN_IRQ_RX | GRCAN_IRQ_TX | GRCAN_IRQ_ERRORS)
 180
 181 #define GRCAN_MSG_SIZE          16
 182
 183 #define GRCAN_MSG_IDE           0x80000000
 184 #define GRCAN_MSG_RTR           0x40000000
 185 #define GRCAN_MSG_BID           0x1ffc0000
 186 #define GRCAN_MSG_EID           0x1fffffff
 187 #define GRCAN_MSG_IDE_BIT       31
 188 #define GRCAN_MSG_RTR_BIT       30
 189 #define GRCAN_MSG_BID_BIT       18
 190 #define GRCAN_MSG_EID_BIT       0
 191
 192 #define GRCAN_MSG_DLC           0xf0000000
 193 #define GRCAN_MSG_TXERRC        0x00ff0000
 194 #define GRCAN_MSG_RXERRC        0x0000ff00
 195 #define GRCAN_MSG_DLC_BIT       28
 196 #define GRCAN_MSG_TXERRC_BIT    16
 197 #define GRCAN_MSG_RXERRC_BIT    8
 198 #define GRCAN_MSG_AHBERR        0x00000008
 199 #define GRCAN_MSG_OR            0x00000004
 200 #define GRCAN_MSG_OFF           0x00000002
 201 #define GRCAN_MSG_PASS          0x00000001
 202
 203 #define GRCAN_MSG_DATA_SLOT_INDEX(i) (2 + (i) / 4)
 204 #define GRCAN_MSG_DATA_SHIFT(i) ((3 - (i) % 4) * 8)
 205
 206 #define GRCAN_BUFFER_ALIGNMENT          1024
 207 #define GRCAN_DEFAULT_BUFFER_SIZE       1024
 208 #define GRCAN_VALID_TR_SIZE_MASK        0x001fffc0
 209
 210 #define GRCAN_INVALID_BUFFER_SIZE(s)                    \
 211         ((s) == 0 || ((s) & ~GRCAN_VALID_TR_SIZE_MASK))
 212
 213 #if GRCAN_INVALID_BUFFER_SIZE(GRCAN_DEFAULT_BUFFER_SIZE)
 214 #error "Invalid default buffer size"
 215 #endif
 216
 217 struct grcan_dma_buffer {
 218         size_t size;
 219         void *buf;
 220         dma_addr_t handle;
 221 };
 222
 223 struct grcan_dma {
 224         size_t base_size;
 225         void *base_buf;
 226         dma_addr_t base_handle;
 227         struct grcan_dma_buffer tx;
 228         struct grcan_dma_buffer rx;
 229 };
 230
 231 /* GRCAN configuration parameters */
 232 struct grcan_device_config {
 233         unsigned short enable0;
 234         unsigned short enable1;
 235         unsigned short select;
 236         unsigned int txsize;
 237         unsigned int rxsize;
 238 };
 239
 240 #define GRCAN_DEFAULT_DEVICE_CONFIG {                           \
 241                 .enable0        = 0,                            \
 242                 .enable1        = 0,                            \
 243                 .select         = 0,                            \
 244                 .txsize         = GRCAN_DEFAULT_BUFFER_SIZE,    \
 245                 .rxsize         = GRCAN_DEFAULT_BUFFER_SIZE,    \
 246                 }
 247
 248 #define GRCAN_TXBUG_SAFE_GRLIB_VERSION  0x4100
 249 #define GRLIB_VERSION_MASK              0xffff
 250
 251 /* GRCAN private data structure */
 252 struct grcan_priv {
 253         struct can_priv can;    /* must be the first member */
 254         struct net_device *dev;
 255         struct napi_struct napi;
 256
 257         struct grcan_registers __iomem *regs;   /* ioremap'ed registers */
 258         struct grcan_device_config config;
 259         struct grcan_dma dma;
 260
 261         struct sk_buff **echo_skb;      /* We allocate this on our own */
 262         u8 *txdlc;                      /* Length of queued frames */
 263
 264         /* The echo skb pointer, pointing into echo_skb and indicating which
 265          * frames can be echoed back. See the "Notes on the tx cyclic buffer
 266          * handling"-comment for grcan_start_xmit for more details.
 267          */
 268         u32 eskbp;
 269
 270         /* Lock for controlling changes to the netif tx queue state, accesses to
 271          * the echo_skb pointer eskbp and for making sure that a running reset
 272          * and/or a close of the interface is done without interference from
 273          * other parts of the code.
 274          *
 275          * The echo_skb pointer, eskbp, should only be accessed under this lock
 276          * as it can be changed in several places and together with decisions on
 277          * whether to wake up the tx queue.
 278          *
 279          * The tx queue must never be woken up if there is a running reset or
 280          * close in progress.
 281          *
 282          * A running reset (see below on need_txbug_workaround) should never be
 283          * done if the interface is closing down and several running resets
 284          * should never be scheduled simultaneously.
 285          */
 286         spinlock_t lock;
 287
 288         /* Whether a workaround is needed due to a bug in older hardware. In
 289          * this case, the driver both tries to prevent the bug from being
 290          * triggered and recovers, if the bug nevertheless happens, by doing a
 291          * running reset. A running reset, resets the device and continues from
 292          * where it were without being noticeable from outside the driver (apart
 293          * from slight delays).
 294          */
 295         bool need_txbug_workaround;
 296
 297         /* To trigger initization of running reset and to trigger running reset
 298          * respectively in the case of a hanged device due to a txbug.
 299          */
 300         struct timer_list hang_timer;
 301         struct timer_list rr_timer;
 302
 303         /* To avoid waking up the netif queue and restarting timers
 304          * when a reset is scheduled or when closing of the device is
 305          * undergoing
 306          */
 307         bool resetting;
 308         bool closing;
 309 };
 310
 311 /* Wait time for a short wait for ongoing to clear */
 312 #define GRCAN_SHORTWAIT_USECS   10
 313
 314 /* Limit on the number of transmitted bits of an eff frame according to the CAN
 315  * specification: 1 bit start of frame, 32 bits arbitration field, 6 bits
 316  * control field, 8 bytes data field, 16 bits crc field, 2 bits ACK field and 7
 317  * bits end of frame
 318  */
 319 #define GRCAN_EFF_FRAME_MAX_BITS        (1+32+6+8*8+16+2+7)
 320
 321 #if defined(__BIG_ENDIAN)
 322 static inline u32 grcan_read_reg(u32 __iomem *reg)
 323 {
 324         return ioread32be(reg);
 325 }
 326
 327 static inline void grcan_write_reg(u32 __iomem *reg, u32 val)
 328 {
 329         iowrite32be(val, reg);
 330 }
 331 #else
 332 static inline u32 grcan_read_reg(u32 __iomem *reg)
 333 {
 334         return ioread32(reg);
 335 }
 336
 337 static inline void grcan_write_reg(u32 __iomem *reg, u32 val)
 338 {
 339         iowrite32(val, reg);
 340 }
 341 #endif
 342
 343 static inline void grcan_clear_bits(u32 __iomem *reg, u32 mask)
 344 {
 345         grcan_write_reg(reg, grcan_read_reg(reg) & ~mask);
 346 }
 347
 348 static inline void grcan_set_bits(u32 __iomem *reg, u32 mask)
 349 {
 350         grcan_write_reg(reg, grcan_read_reg(reg) | mask);
 351 }
 352
 353 static inline u32 grcan_read_bits(u32 __iomem *reg, u32 mask)
 354 {
 355         return grcan_read_reg(reg) & mask;
 356 }
 357
 358 static inline void grcan_write_bits(u32 __iomem *reg, u32 value, u32 mask)
 359 {
 360         u32 old = grcan_read_reg(reg);
 361
 362         grcan_write_reg(reg, (old & ~mask) | (value & mask));
 363 }
 364
 365 /* a and b should both be in [0,size] and a == b == size should not hold */
 366 static inline u32 grcan_ring_add(u32 a, u32 b, u32 size)
 367 {
 368         u32 sum = a + b;
 369
 370         if (sum < size)
 371                 return sum;
 372         else
 373                 return sum - size;
 374 }
 375
 376 /* a and b should both be in [0,size) */
 377 static inline u32 grcan_ring_sub(u32 a, u32 b, u32 size)
 378 {
 379         return grcan_ring_add(a, size - b, size);
 380 }
 381
 382 /* Available slots for new transmissions */
 383 static inline u32 grcan_txspace(size_t txsize, u32 txwr, u32 eskbp)
 384 {
 385         u32 slots = txsize / GRCAN_MSG_SIZE - 1;
 386         u32 used = grcan_ring_sub(txwr, eskbp, txsize) / GRCAN_MSG_SIZE;
 387
 388         return slots - used;
 389 }
 390
 391 /* Configuration parameters that can be set via module parameters */
 392 static struct grcan_device_config grcan_module_config =
 393         GRCAN_DEFAULT_DEVICE_CONFIG;
 394
 395 static const struct can_bittiming_const grcan_bittiming_const = {
 396         .name           = DRV_NAME,
 397         .tseg1_min      = GRCAN_CONF_PS1_MIN + 1,
 398         .tseg1_max      = GRCAN_CONF_PS1_MAX + 1,
 399         .tseg2_min      = GRCAN_CONF_PS2_MIN,
 400         .tseg2_max      = GRCAN_CONF_PS2_MAX,
 401         .sjw_max        = GRCAN_CONF_RSJ_MAX,
 402         .brp_min        = GRCAN_CONF_SCALER_MIN + 1,
 403         .brp_max        = GRCAN_CONF_SCALER_MAX + 1,
 404         .brp_inc        = GRCAN_CONF_SCALER_INC,
 405 };
 406
 407 static int grcan_set_bittiming(struct net_device *dev)
 408 {
 409         struct grcan_priv *priv = netdev_priv(dev);
 410         struct grcan_registers __iomem *regs = priv->regs;
 411         struct can_bittiming *bt = &priv->can.bittiming;
 412         u32 timing = 0;
 413         int bpr, rsj, ps1, ps2, scaler;
 414
 415         /* Should never happen - function will not be called when
 416          * device is up
 417          */
 418         if (grcan_read_bits(&regs->ctrl, GRCAN_CTRL_ENABLE))
 419                 return -EBUSY;
 420
 421         bpr = 0; /* Note bpr and brp are different concepts */
 422         rsj = bt->sjw;
 423         ps1 = (bt->prop_seg + bt->phase_seg1) - 1; /* tseg1 - 1 */
 424         ps2 = bt->phase_seg2;
 425         scaler = (bt->brp - 1);
 426         netdev_dbg(dev, "Request for BPR=%d, RSJ=%d, PS1=%d, PS2=%d, SCALER=%d",
 427                    bpr, rsj, ps1, ps2, scaler);
 428         if (!(ps1 > ps2)) {
 429                 netdev_err(dev, "PS1 > PS2 must hold: PS1=%d, PS2=%d\n",
 430                            ps1, ps2);
 431                 return -EINVAL;
 432         }
 433         if (!(ps2 >= rsj)) {
 434                 netdev_err(dev, "PS2 >= RSJ must hold: PS2=%d, RSJ=%d\n",
 435                            ps2, rsj);
 436                 return -EINVAL;
 437         }
 438
 439         timing |= (bpr << GRCAN_CONF_BPR_BIT) & GRCAN_CONF_BPR;
 440         timing |= (rsj << GRCAN_CONF_RSJ_BIT) & GRCAN_CONF_RSJ;
 441         timing |= (ps1 << GRCAN_CONF_PS1_BIT) & GRCAN_CONF_PS1;
 442         timing |= (ps2 << GRCAN_CONF_PS2_BIT) & GRCAN_CONF_PS2;
 443         timing |= (scaler << GRCAN_CONF_SCALER_BIT) & GRCAN_CONF_SCALER;
 444         netdev_info(dev, "setting timing=0x%x\n", timing);
 445         grcan_write_bits(&regs->conf, timing, GRCAN_CONF_TIMING);
 446
 447         return 0;
 448 }
 449
 450 static int grcan_get_berr_counter(const struct net_device *dev,
 451                                   struct can_berr_counter *bec)
 452 {
 453         struct grcan_priv *priv = netdev_priv(dev);
 454         struct grcan_registers __iomem *regs = priv->regs;
 455         u32 status = grcan_read_reg(&regs->stat);
 456
 457         bec->txerr = (status & GRCAN_STAT_TXERRCNT) >> GRCAN_STAT_TXERRCNT_BIT;
 458         bec->rxerr = (status & GRCAN_STAT_RXERRCNT) >> GRCAN_STAT_RXERRCNT_BIT;
 459         return 0;
 460 }
 461
 462 static int grcan_poll(struct napi_struct *napi, int budget);
 463
 464 /* Reset device, but keep configuration information */
 465 static void grcan_reset(struct net_device *dev)
 466 {
 467         struct grcan_priv *priv = netdev_priv(dev);
 468         struct grcan_registers __iomem *regs = priv->regs;
 469         u32 config = grcan_read_reg(&regs->conf);
 470
 471         grcan_set_bits(&regs->ctrl, GRCAN_CTRL_RESET);
 472         grcan_write_reg(&regs->conf, config);
 473
 474         priv->eskbp = grcan_read_reg(&regs->txrd);
 475         priv->can.state = CAN_STATE_STOPPED;
 476
 477         /* Turn off hardware filtering - regs->rxcode set to 0 by reset */
 478         grcan_write_reg(&regs->rxmask, 0);
 479 }
 480
 481 /* stop device without changing any configurations */
 482 static void grcan_stop_hardware(struct net_device *dev)
 483 {
 484         struct grcan_priv *priv = netdev_priv(dev);
 485         struct grcan_registers __iomem *regs = priv->regs;
 486
 487         grcan_write_reg(&regs->imr, GRCAN_IRQ_NONE);
 488         grcan_clear_bits(&regs->txctrl, GRCAN_TXCTRL_ENABLE);
 489         grcan_clear_bits(&regs->rxctrl, GRCAN_RXCTRL_ENABLE);
 490         grcan_clear_bits(&regs->ctrl, GRCAN_CTRL_ENABLE);
 491 }
 492
 493 /* Let priv->eskbp catch up to regs->txrd and echo back the skbs if echo
 494  * is true and free them otherwise.
 495  *
 496  * If budget is >= 0, stop after handling at most budget skbs. Otherwise,
 497  * continue until priv->eskbp catches up to regs->txrd.
 498  *
 499  * priv->lock *must* be held when calling this function
 500  */
 501 static int catch_up_echo_skb(struct net_device *dev, int budget, bool echo)
 502 {
 503         struct grcan_priv *priv = netdev_priv(dev);
 504         struct grcan_registers __iomem *regs = priv->regs;
 505         struct grcan_dma *dma = &priv->dma;
 506         struct net_device_stats *stats = &dev->stats;
 507         int i, work_done;
 508
 509         /* Updates to priv->eskbp and wake-ups of the queue needs to
 510          * be atomic towards the reads of priv->eskbp and shut-downs
 511          * of the queue in grcan_start_xmit.
 512          */
 513         u32 txrd = grcan_read_reg(&regs->txrd);
 514
 515         for (work_done = 0; work_done < budget || budget < 0; work_done++) {
 516                 if (priv->eskbp == txrd)
 517                         break;
 518                 i = priv->eskbp / GRCAN_MSG_SIZE;
 519                 if (echo) {
 520                         /* Normal echo of messages */
 521                         stats->tx_packets++;
 522                         stats->tx_bytes += priv->txdlc[i];
 523                         priv->txdlc[i] = 0;
 524                         can_get_echo_skb(dev, i);
 525                 } else {
 526                         /* For cleanup of untransmitted messages */
 527                         can_free_echo_skb(dev, i);
 528                 }
 529
 530                 priv->eskbp = grcan_ring_add(priv->eskbp, GRCAN_MSG_SIZE,
 531                                              dma->tx.size);
 532                 txrd = grcan_read_reg(&regs->txrd);
 533         }
 534         return work_done;
 535 }
 536
 537 static void grcan_lost_one_shot_frame(struct net_device *dev)
 538 {
 539         struct grcan_priv *priv = netdev_priv(dev);
 540         struct grcan_registers __iomem *regs = priv->regs;
 541         struct grcan_dma *dma = &priv->dma;
 542         u32 txrd;
 543         unsigned long flags;
 544
 545         spin_lock_irqsave(&priv->lock, flags);
 546
 547         catch_up_echo_skb(dev, -1, true);
 548
 549         if (unlikely(grcan_read_bits(&regs->txctrl, GRCAN_TXCTRL_ENABLE))) {
 550                 /* Should never happen */
 551                 netdev_err(dev, "TXCTRL enabled at TXLOSS in one shot mode\n");
 552         } else {
 553                 /* By the time an GRCAN_IRQ_TXLOSS is generated in
 554                  * one-shot mode there is no problem in writing
 555                  * to TXRD even in versions of the hardware in
 556                  * which GRCAN_TXCTRL_ONGOING is not cleared properly
 557                  * in one-shot mode.
 558                  */
 559
 560                 /* Skip message and discard echo-skb */
 561                 txrd = grcan_read_reg(&regs->txrd);
 562                 txrd = grcan_ring_add(txrd, GRCAN_MSG_SIZE, dma->tx.size);
 563                 grcan_write_reg(&regs->txrd, txrd);
 564                 catch_up_echo_skb(dev, -1, false);
 565
 566                 if (!priv->resetting && !priv->closing &&
 567                     !(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) {
 568                         netif_wake_queue(dev);
 569                         grcan_set_bits(&regs->txctrl, GRCAN_TXCTRL_ENABLE);
 570                 }
 571         }
 572
 573         spin_unlock_irqrestore(&priv->lock, flags);
 574 }
 575
 576 static void grcan_err(struct net_device *dev, u32 sources, u32 status)
 577 {
 578         struct grcan_priv *priv = netdev_priv(dev);
 579         struct grcan_registers __iomem *regs = priv->regs;
 580         struct grcan_dma *dma = &priv->dma;
 581         struct net_device_stats *stats = &dev->stats;
 582         struct can_frame cf;
 583
 584         /* Zero potential error_frame */
 585         memset(&cf, 0, sizeof(cf));
 586
 587         /* Message lost interrupt. This might be due to arbitration error, but
 588          * is also triggered when there is no one else on the can bus or when
 589          * there is a problem with the hardware interface or the bus itself. As
 590          * arbitration errors can not be singled out, no error frames are
 591          * generated reporting this event as an arbitration error.
 592          */
 593         if (sources & GRCAN_IRQ_TXLOSS) {
 594                 /* Take care of failed one-shot transmit */
 595                 if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
 596                         grcan_lost_one_shot_frame(dev);
 597
 598                 /* Stop printing as soon as error passive or bus off is in
 599                  * effect to limit the amount of txloss debug printouts.
 600                  */
 601                 if (!(status & GRCAN_STAT_ERRCTR_RELATED)) {
 602                         netdev_dbg(dev, "tx message lost\n");
 603                         stats->tx_errors++;
 604                 }
 605         }
 606
 607         /* Conditions dealing with the error counters. There is no interrupt for
 608          * error warning, but there are interrupts for increases of the error
 609          * counters.
 610          */
 611         if ((sources & GRCAN_IRQ_ERRCTR_RELATED) ||
 612             (status & GRCAN_STAT_ERRCTR_RELATED)) {
 613                 enum can_state state = priv->can.state;
 614                 enum can_state oldstate = state;
 615                 u32 txerr = (status & GRCAN_STAT_TXERRCNT)
 616                         >> GRCAN_STAT_TXERRCNT_BIT;
 617                 u32 rxerr = (status & GRCAN_STAT_RXERRCNT)
 618                         >> GRCAN_STAT_RXERRCNT_BIT;
 619
 620                 /* Figure out current state */
 621                 if (status & GRCAN_STAT_OFF) {
 622                         state = CAN_STATE_BUS_OFF;
 623                 } else if (status & GRCAN_STAT_PASS) {
 624                         state = CAN_STATE_ERROR_PASSIVE;
 625                 } else if (txerr >= GRCAN_STAT_ERRCNT_WARNING_LIMIT ||
 626                            rxerr >= GRCAN_STAT_ERRCNT_WARNING_LIMIT) {
 627                         state = CAN_STATE_ERROR_WARNING;
 628                 } else {
 629                         state = CAN_STATE_ERROR_ACTIVE;
 630                 }
 631
 632                 /* Handle and report state changes */
 633                 if (state != oldstate) {
 634                         switch (state) {
 635                         case CAN_STATE_BUS_OFF:
 636                                 netdev_dbg(dev, "bus-off\n");
 637                                 netif_carrier_off(dev);
 638                                 priv->can.can_stats.bus_off++;
 639
 640                                 /* Prevent the hardware from recovering from bus
 641                                  * off on its own if restart is disabled.
 642                                  */
 643                                 if (!priv->can.restart_ms)
 644                                         grcan_stop_hardware(dev);
 645
 646                                 cf.can_id |= CAN_ERR_BUSOFF;
 647                                 break;
 648
 649                         case CAN_STATE_ERROR_PASSIVE:
 650                                 netdev_dbg(dev, "Error passive condition\n");
 651                                 priv->can.can_stats.error_passive++;
 652
 653                                 cf.can_id |= CAN_ERR_CRTL;
 654                                 if (txerr >= GRCAN_STAT_ERRCNT_PASSIVE_LIMIT)
 655                                         cf.data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
 656                                 if (rxerr >= GRCAN_STAT_ERRCNT_PASSIVE_LIMIT)
 657                                         cf.data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
 658                                 break;
 659
 660                         case CAN_STATE_ERROR_WARNING:
 661                                 netdev_dbg(dev, "Error warning condition\n");
 662                                 priv->can.can_stats.error_warning++;
 663
 664                                 cf.can_id |= CAN_ERR_CRTL;
 665                                 if (txerr >= GRCAN_STAT_ERRCNT_WARNING_LIMIT)
 666                                         cf.data[1] |= CAN_ERR_CRTL_TX_WARNING;
 667                                 if (rxerr >= GRCAN_STAT_ERRCNT_WARNING_LIMIT)
 668                                         cf.data[1] |= CAN_ERR_CRTL_RX_WARNING;
 669                                 break;
 670
 671                         case CAN_STATE_ERROR_ACTIVE:
 672                                 netdev_dbg(dev, "Error active condition\n");
 673                                 cf.can_id |= CAN_ERR_CRTL;
 674                                 break;
 675
 676                         default:
 677                                 /* There are no others at this point */
 678                                 break;
 679                         }
 680                         cf.data[6] = txerr;
 681                         cf.data[7] = rxerr;
 682                         priv->can.state = state;
 683                 }
 684
 685                 /* Report automatic restarts */
 686                 if (priv->can.restart_ms && oldstate == CAN_STATE_BUS_OFF) {
 687                         unsigned long flags;
 688
 689                         cf.can_id |= CAN_ERR_RESTARTED;
 690                         netdev_dbg(dev, "restarted\n");
 691                         priv->can.can_stats.restarts++;
 692                         netif_carrier_on(dev);
 693
 694                         spin_lock_irqsave(&priv->lock, flags);
 695
 696                         if (!priv->resetting && !priv->closing) {
 697                                 u32 txwr = grcan_read_reg(&regs->txwr);
 698
 699                                 if (grcan_txspace(dma->tx.size, txwr,
 700                                                   priv->eskbp))
 701                                         netif_wake_queue(dev);
 702                         }
 703
 704                         spin_unlock_irqrestore(&priv->lock, flags);
 705                 }
 706         }
 707
 708         /* Data overrun interrupt */
 709         if ((sources & GRCAN_IRQ_OR) || (status & GRCAN_STAT_OR)) {
 710                 netdev_dbg(dev, "got data overrun interrupt\n");
 711                 stats->rx_over_errors++;
 712                 stats->rx_errors++;
 713
 714                 cf.can_id |= CAN_ERR_CRTL;
 715                 cf.data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
 716         }
 717
 718         /* AHB bus error interrupts (not CAN bus errors) - shut down the
 719          * device.
 720          */
 721         if (sources & (GRCAN_IRQ_TXAHBERR | GRCAN_IRQ_RXAHBERR) ||
 722             (status & GRCAN_STAT_AHBERR)) {
 723                 char *txrx = "";
 724                 unsigned long flags;
 725
 726                 if (sources & GRCAN_IRQ_TXAHBERR) {
 727                         txrx = "on tx ";
 728                         stats->tx_errors++;
 729                 } else if (sources & GRCAN_IRQ_RXAHBERR) {
 730                         txrx = "on rx ";
 731                         stats->rx_errors++;
 732                 }
 733                 netdev_err(dev, "Fatal AHB buss error %s- halting device\n",
 734                            txrx);
 735
 736                 spin_lock_irqsave(&priv->lock, flags);
 737
 738                 /* Prevent anything to be enabled again and halt device */
 739                 priv->closing = true;
 740                 netif_stop_queue(dev);
 741                 grcan_stop_hardware(dev);
 742                 priv->can.state = CAN_STATE_STOPPED;
 743
 744                 spin_unlock_irqrestore(&priv->lock, flags);
 745         }
 746
 747         /* Pass on error frame if something to report,
 748          * i.e. id contains some information
 749          */
 750         if (cf.can_id) {
 751                 struct can_frame *skb_cf;
 752                 struct sk_buff *skb = alloc_can_err_skb(dev, &skb_cf);
 753
 754                 if (skb == NULL) {
 755                         netdev_dbg(dev, "could not allocate error frame\n");
 756                         return;
 757                 }
 758                 skb_cf->can_id |= cf.can_id;
 759                 memcpy(skb_cf->data, cf.data, sizeof(cf.data));
 760
 761                 netif_rx(skb);
 762         }
 763 }
 764
 765 static irqreturn_t grcan_interrupt(int irq, void *dev_id)
 766 {
 767         struct net_device *dev = dev_id;
 768         struct grcan_priv *priv = netdev_priv(dev);
 769         struct grcan_registers __iomem *regs = priv->regs;
 770         u32 sources, status;
 771
 772         /* Find out the source */
 773         sources = grcan_read_reg(&regs->pimsr);
 774         if (!sources)
 775                 return IRQ_NONE;
 776         grcan_write_reg(&regs->picr, sources);
 777         status = grcan_read_reg(&regs->stat);
 778
 779         /* If we got TX progress, the device has not hanged,
 780          * so disable the hang timer
 781          */
 782         if (priv->need_txbug_workaround &&
 783             (sources & (GRCAN_IRQ_TX | GRCAN_IRQ_TXLOSS))) {
 784                 del_timer(&priv->hang_timer);
 785         }
 786
 787         /* Frame(s) received or transmitted */
 788         if (sources & (GRCAN_IRQ_TX | GRCAN_IRQ_RX)) {
 789                 /* Disable tx/rx interrupts and schedule poll(). No need for
 790                  * locking as interference from a running reset at worst leads
 791                  * to an extra interrupt.
 792                  */
 793                 grcan_clear_bits(&regs->imr, GRCAN_IRQ_TX | GRCAN_IRQ_RX);
 794                 napi_schedule(&priv->napi);
 795         }
 796
 797         /* (Potential) error conditions to take care of */
 798         if (sources & GRCAN_IRQ_ERRORS)
 799                 grcan_err(dev, sources, status);
 800
 801         return IRQ_HANDLED;
 802 }
 803
 804 /* Reset device and restart operations from where they were.
 805  *
 806  * This assumes that RXCTRL & RXCTRL is properly disabled and that RX
 807  * is not ONGOING (TX might be stuck in ONGOING due to a harwrware bug
 808  * for single shot)
 809  */
 810 static void grcan_running_reset(unsigned long data)
 811 {
 812         struct net_device *dev = (struct net_device *)data;
 813         struct grcan_priv *priv = netdev_priv(dev);
 814         struct grcan_registers __iomem *regs = priv->regs;
 815         unsigned long flags;
 816
 817         /* This temporarily messes with eskbp, so we need to lock
 818          * priv->lock
 819          */
 820         spin_lock_irqsave(&priv->lock, flags);
 821
 822         priv->resetting = false;
 823         del_timer(&priv->hang_timer);
 824         del_timer(&priv->rr_timer);
 825
 826         if (!priv->closing) {
 827                 /* Save and reset - config register preserved by grcan_reset */
 828                 u32 imr = grcan_read_reg(&regs->imr);
 829
 830                 u32 txaddr = grcan_read_reg(&regs->txaddr);
 831                 u32 txsize = grcan_read_reg(&regs->txsize);
 832                 u32 txwr = grcan_read_reg(&regs->txwr);
 833                 u32 txrd = grcan_read_reg(&regs->txrd);
 834                 u32 eskbp = priv->eskbp;
 835
 836                 u32 rxaddr = grcan_read_reg(&regs->rxaddr);
 837                 u32 rxsize = grcan_read_reg(&regs->rxsize);
 838                 u32 rxwr = grcan_read_reg(&regs->rxwr);
 839                 u32 rxrd = grcan_read_reg(&regs->rxrd);
 840
 841                 grcan_reset(dev);
 842
 843                 /* Restore */
 844                 grcan_write_reg(&regs->txaddr, txaddr);
 845                 grcan_write_reg(&regs->txsize, txsize);
 846                 grcan_write_reg(&regs->txwr, txwr);
 847                 grcan_write_reg(&regs->txrd, txrd);
 848                 priv->eskbp = eskbp;
 849
 850                 grcan_write_reg(&regs->rxaddr, rxaddr);
 851                 grcan_write_reg(&regs->rxsize, rxsize);
 852                 grcan_write_reg(&regs->rxwr, rxwr);
 853                 grcan_write_reg(&regs->rxrd, rxrd);
 854
 855                 /* Turn on device again */
 856                 grcan_write_reg(&regs->imr, imr);
 857                 priv->can.state = CAN_STATE_ERROR_ACTIVE;
 858                 grcan_write_reg(&regs->txctrl, GRCAN_TXCTRL_ENABLE
 859                                 | (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT
 860                                    ? GRCAN_TXCTRL_SINGLE : 0));
 861                 grcan_write_reg(&regs->rxctrl, GRCAN_RXCTRL_ENABLE);
 862                 grcan_write_reg(&regs->ctrl, GRCAN_CTRL_ENABLE);
 863
 864                 /* Start queue if there is size and listen-onle mode is not
 865                  * enabled
 866                  */
 867                 if (grcan_txspace(priv->dma.tx.size, txwr, priv->eskbp) &&
 868                     !(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
 869                         netif_wake_queue(dev);
 870         }
 871
 872         spin_unlock_irqrestore(&priv->lock, flags);
 873
 874         netdev_err(dev, "Device reset and restored\n");
 875 }
 876
 877 /* Waiting time in usecs corresponding to the transmission of three maximum
 878  * sized can frames in the given bitrate (in bits/sec). Waiting for this amount
 879  * of time makes sure that the can controller have time to finish sending or
 880  * receiving a frame with a good margin.
 881  *
 882  * usecs/sec * number of frames * bits/frame / bits/sec
 883  */
 884 static inline u32 grcan_ongoing_wait_usecs(__u32 bitrate)
 885 {
 886         return 1000000 * 3 * GRCAN_EFF_FRAME_MAX_BITS / bitrate;
 887 }
 888
 889 /* Set timer so that it will not fire until after a period in which the can
 890  * controller have a good margin to finish transmitting a frame unless it has
 891  * hanged
 892  */
 893 static inline void grcan_reset_timer(struct timer_list *timer, __u32 bitrate)
 894 {
 895         u32 wait_jiffies = usecs_to_jiffies(grcan_ongoing_wait_usecs(bitrate));
 896
 897         mod_timer(timer, jiffies + wait_jiffies);
 898 }
 899
 900 /* Disable channels and schedule a running reset */
 901 static void grcan_initiate_running_reset(unsigned long data)
 902 {
 903         struct net_device *dev = (struct net_device *)data;
 904         struct grcan_priv *priv = netdev_priv(dev);
 905         struct grcan_registers __iomem *regs = priv->regs;
 906         unsigned long flags;
 907
 908         netdev_err(dev, "Device seems hanged - reset scheduled\n");
 909
 910         spin_lock_irqsave(&priv->lock, flags);
 911
 912         /* The main body of this function must never be executed again
 913          * until after an execution of grcan_running_reset
 914          */
 915         if (!priv->resetting && !priv->closing) {
 916                 priv->resetting = true;
 917                 netif_stop_queue(dev);
 918                 grcan_clear_bits(&regs->txctrl, GRCAN_TXCTRL_ENABLE);
 919                 grcan_clear_bits(&regs->rxctrl, GRCAN_RXCTRL_ENABLE);
 920                 grcan_reset_timer(&priv->rr_timer, priv->can.bittiming.bitrate);
 921         }
 922
 923         spin_unlock_irqrestore(&priv->lock, flags);
 924 }
 925
 926 static void grcan_free_dma_buffers(struct net_device *dev)
 927 {
 928         struct grcan_priv *priv = netdev_priv(dev);
 929         struct grcan_dma *dma = &priv->dma;
 930
 931         dma_free_coherent(&dev->dev, dma->base_size, dma->base_buf,
 932                           dma->base_handle);
 933         memset(dma, 0, sizeof(*dma));
 934 }
 935
 936 static int grcan_allocate_dma_buffers(struct net_device *dev,
 937                                       size_t tsize, size_t rsize)
 938 {
 939         struct grcan_priv *priv = netdev_priv(dev);
 940         struct grcan_dma *dma = &priv->dma;
 941         struct grcan_dma_buffer *large = rsize > tsize ? &dma->rx : &dma->tx;
 942         struct grcan_dma_buffer *small = rsize > tsize ? &dma->tx : &dma->rx;
 943         size_t shift;
 944
 945         /* Need a whole number of GRCAN_BUFFER_ALIGNMENT for the large,
 946          * i.e. first buffer
 947          */
 948         size_t maxs = max(tsize, rsize);
 949         size_t lsize = ALIGN(maxs, GRCAN_BUFFER_ALIGNMENT);
 950
 951         /* Put the small buffer after that */
 952         size_t ssize = min(tsize, rsize);
 953
 954         /* Extra GRCAN_BUFFER_ALIGNMENT to allow for alignment */
 955         dma->base_size = lsize + ssize + GRCAN_BUFFER_ALIGNMENT;
 956         dma->base_buf = dma_alloc_coherent(&dev->dev,
 957                                            dma->base_size,
 958                                            &dma->base_handle,
 959                                            GFP_KERNEL);
 960
 961         if (!dma->base_buf)
 962                 return -ENOMEM;
 963
 964         dma->tx.size = tsize;
 965         dma->rx.size = rsize;
 966
 967         large->handle = ALIGN(dma->base_handle, GRCAN_BUFFER_ALIGNMENT);
 968         small->handle = large->handle + lsize;
 969         shift = large->handle - dma->base_handle;
 970
 971         large->buf = dma->base_buf + shift;
 972         small->buf = large->buf + lsize;
 973
 974         return 0;
 975 }
 976
 977 /* priv->lock *must* be held when calling this function */
 978 static int grcan_start(struct net_device *dev)
 979 {
 980         struct grcan_priv *priv = netdev_priv(dev);
 981         struct grcan_registers __iomem *regs = priv->regs;
 982         u32 confop, txctrl;
 983
 984         grcan_reset(dev);
 985
 986         grcan_write_reg(&regs->txaddr, priv->dma.tx.handle);
 987         grcan_write_reg(&regs->txsize, priv->dma.tx.size);
 988         /* regs->txwr, regs->txrd and priv->eskbp already set to 0 by reset */
 989
 990         grcan_write_reg(&regs->rxaddr, priv->dma.rx.handle);
 991         grcan_write_reg(&regs->rxsize, priv->dma.rx.size);
 992         /* regs->rxwr and regs->rxrd already set to 0 by reset */
 993
 994         /* Enable interrupts */
 995         grcan_read_reg(&regs->pir);
 996         grcan_write_reg(&regs->imr, GRCAN_IRQ_DEFAULT);
 997
 998         /* Enable interfaces, channels and device */
 999         confop = GRCAN_CONF_ABORT
1000                 | (priv->config.enable0 ? GRCAN_CONF_ENABLE0 : 0)
1001                 | (priv->config.enable1 ? GRCAN_CONF_ENABLE1 : 0)
1002                 | (priv->config.select ? GRCAN_CONF_SELECT : 0)
1003                 | (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY ?
1004                    GRCAN_CONF_SILENT : 0)
1005                 | (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES ?
1006                    GRCAN_CONF_SAM : 0);
1007         grcan_write_bits(&regs->conf, confop, GRCAN_CONF_OPERATION);
1008         txctrl = GRCAN_TXCTRL_ENABLE
1009                 | (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT
1010                    ? GRCAN_TXCTRL_SINGLE : 0);
1011         grcan_write_reg(&regs->txctrl, txctrl);
1012         grcan_write_reg(&regs->rxctrl, GRCAN_RXCTRL_ENABLE);
1013         grcan_write_reg(&regs->ctrl, GRCAN_CTRL_ENABLE);
1014
1015         priv->can.state = CAN_STATE_ERROR_ACTIVE;
1016
1017         return 0;
1018 }
1019
1020 static int grcan_set_mode(struct net_device *dev, enum can_mode mode)
1021 {
1022         struct grcan_priv *priv = netdev_priv(dev);
1023         unsigned long flags;
1024         int err = 0;
1025
1026         if (mode == CAN_MODE_START) {
1027                 /* This might be called to restart the device to recover from
1028                  * bus off errors
1029                  */
1030                 spin_lock_irqsave(&priv->lock, flags);
1031                 if (priv->closing || priv->resetting) {
1032                         err = -EBUSY;
1033                 } else {
1034                         netdev_info(dev, "Restarting device\n");
1035                         grcan_start(dev);
1036                         if (!(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
1037                                 netif_wake_queue(dev);
1038                 }
1039                 spin_unlock_irqrestore(&priv->lock, flags);
1040                 return err;
1041         }
1042         return -EOPNOTSUPP;
1043 }
1044
1045 static int grcan_open(struct net_device *dev)
1046 {
1047         struct grcan_priv *priv = netdev_priv(dev);
1048         struct grcan_dma *dma = &priv->dma;
1049         unsigned long flags;
1050         int err;
1051
1052         /* Allocate memory */
1053         err = grcan_allocate_dma_buffers(dev, priv->config.txsize,
1054                                          priv->config.rxsize);
1055         if (err) {
1056                 netdev_err(dev, "could not allocate DMA buffers\n");
1057                 return err;
1058         }
1059
1060         priv->echo_skb = kzalloc(dma->tx.size * sizeof(*priv->echo_skb),
1061                                  GFP_KERNEL);
1062         if (!priv->echo_skb) {
1063                 err = -ENOMEM;
1064                 goto exit_free_dma_buffers;
1065         }
1066         priv->can.echo_skb_max = dma->tx.size;
1067         priv->can.echo_skb = priv->echo_skb;
1068
1069         priv->txdlc = kzalloc(dma->tx.size * sizeof(*priv->txdlc), GFP_KERNEL);
1070         if (!priv->txdlc) {
1071                 err = -ENOMEM;
1072                 goto exit_free_echo_skb;
1073         }
1074
1075         /* Get can device up */
1076         err = open_candev(dev);
1077         if (err)
1078                 goto exit_free_txdlc;
1079
1080         err = request_irq(dev->irq, grcan_interrupt, IRQF_SHARED,
1081                           dev->name, dev);
1082         if (err)
1083                 goto exit_close_candev;
1084
1085         spin_lock_irqsave(&priv->lock, flags);
1086
1087         napi_enable(&priv->napi);
1088         grcan_start(dev);
1089         if (!(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
1090                 netif_start_queue(dev);
1091         priv->resetting = false;
1092         priv->closing = false;
1093
1094         spin_unlock_irqrestore(&priv->lock, flags);
1095
1096         return 0;
1097
1098 exit_close_candev:
1099         close_candev(dev);
1100 exit_free_txdlc:
1101         kfree(priv->txdlc);
1102 exit_free_echo_skb:
1103         kfree(priv->echo_skb);
1104 exit_free_dma_buffers:
1105         grcan_free_dma_buffers(dev);
1106         return err;
1107 }
1108
1109 static int grcan_close(struct net_device *dev)
1110 {
1111         struct grcan_priv *priv = netdev_priv(dev);
1112         unsigned long flags;
1113
1114         napi_disable(&priv->napi);
1115
1116         spin_lock_irqsave(&priv->lock, flags);
1117
1118         priv->closing = true;
1119         if (priv->need_txbug_workaround) {
1120                 del_timer_sync(&priv->hang_timer);
1121                 del_timer_sync(&priv->rr_timer);
1122         }
1123         netif_stop_queue(dev);
1124         grcan_stop_hardware(dev);
1125         priv->can.state = CAN_STATE_STOPPED;
1126
1127         spin_unlock_irqrestore(&priv->lock, flags);
1128
1129         free_irq(dev->irq, dev);
1130         close_candev(dev);
1131
1132         grcan_free_dma_buffers(dev);
1133         priv->can.echo_skb_max = 0;
1134         priv->can.echo_skb = NULL;
1135         kfree(priv->echo_skb);
1136         kfree(priv->txdlc);
1137
1138         return 0;
1139 }
1140
1141 static int grcan_transmit_catch_up(struct net_device *dev, int budget)
1142 {
1143         struct grcan_priv *priv = netdev_priv(dev);
1144         unsigned long flags;
1145         int work_done;
1146
1147         spin_lock_irqsave(&priv->lock, flags);
1148
1149         work_done = catch_up_echo_skb(dev, budget, true);
1150         if (work_done) {
1151                 if (!priv->resetting && !priv->closing &&
1152                     !(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
1153                         netif_wake_queue(dev);
1154
1155                 /* With napi we don't get TX interrupts for a while,
1156                  * so prevent a running reset while catching up
1157                  */
1158                 if (priv->need_txbug_workaround)
1159                         del_timer(&priv->hang_timer);
1160         }
1161
1162         spin_unlock_irqrestore(&priv->lock, flags);
1163
1164         return work_done;
1165 }
1166
1167 static int grcan_receive(struct net_device *dev, int budget)
1168 {
1169         struct grcan_priv *priv = netdev_priv(dev);
1170         struct grcan_registers __iomem *regs = priv->regs;
1171         struct grcan_dma *dma = &priv->dma;
1172         struct net_device_stats *stats = &dev->stats;
1173         struct can_frame *cf;
1174         struct sk_buff *skb;
1175         u32 wr, rd, startrd;
1176         u32 *slot;
1177         u32 i, rtr, eff, j, shift;
1178         int work_done = 0;
1179
1180         rd = grcan_read_reg(&regs->rxrd);
1181         startrd = rd;
1182         for (work_done = 0; work_done < budget; work_done++) {
1183                 /* Check for packet to receive */
1184                 wr = grcan_read_reg(&regs->rxwr);
1185                 if (rd == wr)
1186                         break;
1187
1188                 /* Take care of packet */
1189                 skb = alloc_can_skb(dev, &cf);
1190                 if (skb == NULL) {
1191                         netdev_err(dev,
1192                                    "dropping frame: skb allocation failed\n");
1193                         stats->rx_dropped++;
1194                         continue;
1195                 }
1196
1197                 slot = dma->rx.buf + rd;
1198                 eff = slot[0] & GRCAN_MSG_IDE;
1199                 rtr = slot[0] & GRCAN_MSG_RTR;
1200                 if (eff) {
1201                         cf->can_id = ((slot[0] & GRCAN_MSG_EID)
1202                                       >> GRCAN_MSG_EID_BIT);
1203                         cf->can_id |= CAN_EFF_FLAG;
1204                 } else {
1205                         cf->can_id = ((slot[0] & GRCAN_MSG_BID)
1206                                       >> GRCAN_MSG_BID_BIT);
1207                 }
1208                 cf->can_dlc = get_can_dlc((slot[1] & GRCAN_MSG_DLC)
1209                                           >> GRCAN_MSG_DLC_BIT);
1210                 if (rtr) {
1211                         cf->can_id |= CAN_RTR_FLAG;
1212                 } else {
1213                         for (i = 0; i < cf->can_dlc; i++) {
1214                                 j = GRCAN_MSG_DATA_SLOT_INDEX(i);
1215                                 shift = GRCAN_MSG_DATA_SHIFT(i);
1216                                 cf->data[i] = (u8)(slot[j] >> shift);
1217                         }
1218                 }
1219                 netif_receive_skb(skb);
1220
1221                 /* Update statistics and read pointer */
1222                 stats->rx_packets++;
1223                 stats->rx_bytes += cf->can_dlc;
1224                 rd = grcan_ring_add(rd, GRCAN_MSG_SIZE, dma->rx.size);
1225         }
1226
1227         /* Make sure everything is read before allowing hardware to
1228          * use the memory
1229          */
1230         mb();
1231
1232         /* Update read pointer - no need to check for ongoing */
1233         if (likely(rd != startrd))
1234                 grcan_write_reg(&regs->rxrd, rd);
1235
1236         return work_done;
1237 }
1238
1239 static int grcan_poll(struct napi_struct *napi, int budget)
1240 {
1241         struct grcan_priv *priv = container_of(napi, struct grcan_priv, napi);
1242         struct net_device *dev = priv->dev;
1243         struct grcan_registers __iomem *regs = priv->regs;
1244         unsigned long flags;
1245         int tx_work_done, rx_work_done;
1246         int rx_budget = budget / 2;
1247         int tx_budget = budget - rx_budget;
1248
1249         /* Half of the budget for receiveing messages */
1250         rx_work_done = grcan_receive(dev, rx_budget);
1251
1252         /* Half of the budget for transmitting messages as that can trigger echo
1253          * frames being received
1254          */
1255         tx_work_done = grcan_transmit_catch_up(dev, tx_budget);
1256
1257         if (rx_work_done < rx_budget && tx_work_done < tx_budget) {
1258                 napi_complete(napi);
1259
1260                 /* Guarantee no interference with a running reset that otherwise
1261                  * could turn off interrupts.
1262                  */
1263                 spin_lock_irqsave(&priv->lock, flags);
1264
1265                 /* Enable tx and rx interrupts again. No need to check
1266                  * priv->closing as napi_disable in grcan_close is waiting for
1267                  * scheduled napi calls to finish.
1268                  */
1269                 grcan_set_bits(&regs->imr, GRCAN_IRQ_TX | GRCAN_IRQ_RX);
1270
1271                 spin_unlock_irqrestore(&priv->lock, flags);
1272         }
1273
1274         return rx_work_done + tx_work_done;
1275 }
1276
1277 /* Work tx bug by waiting while for the risky situation to clear. If that fails,
1278  * drop a frame in one-shot mode or indicate a busy device otherwise.
1279  *
1280  * Returns 0 on successful wait. Otherwise it sets *netdev_tx_status to the
1281  * value that should be returned by grcan_start_xmit when aborting the xmit.
1282  */
1283 static int grcan_txbug_workaround(struct net_device *dev, struct sk_buff *skb,
1284                                   u32 txwr, u32 oneshotmode,
1285                                   netdev_tx_t *netdev_tx_status)
1286 {
1287         struct grcan_priv *priv = netdev_priv(dev);
1288         struct grcan_registers __iomem *regs = priv->regs;
1289         struct grcan_dma *dma = &priv->dma;
1290         int i;
1291         unsigned long flags;
1292
1293         /* Wait a while for ongoing to be cleared or read pointer to catch up to
1294          * write pointer. The latter is needed due to a bug in older versions of
1295          * GRCAN in which ONGOING is not cleared properly one-shot mode when a
1296          * transmission fails.
1297          */
1298         for (i = 0; i < GRCAN_SHORTWAIT_USECS; i++) {
1299                 udelay(1);
1300                 if (!grcan_read_bits(&regs->txctrl, GRCAN_TXCTRL_ONGOING) ||
1301                     grcan_read_reg(&regs->txrd) == txwr) {
1302                         return 0;
1303                 }
1304         }
1305
1306         /* Clean up, in case the situation was not resolved */
1307         spin_lock_irqsave(&priv->lock, flags);
1308         if (!priv->resetting && !priv->closing) {
1309                 /* Queue might have been stopped earlier in grcan_start_xmit */
1310                 if (grcan_txspace(dma->tx.size, txwr, priv->eskbp))
1311                         netif_wake_queue(dev);
1312                 /* Set a timer to resolve a hanged tx controller */
1313                 if (!timer_pending(&priv->hang_timer))
1314                         grcan_reset_timer(&priv->hang_timer,
1315                                           priv->can.bittiming.bitrate);
1316         }
1317         spin_unlock_irqrestore(&priv->lock, flags);
1318
1319         if (oneshotmode) {
1320                 /* In one-shot mode we should never end up here because
1321                  * then the interrupt handler increases txrd on TXLOSS,
1322                  * but it is consistent with one-shot mode to drop the
1323                  * frame in this case.
1324                  */
1325                 kfree_skb(skb);
1326                 *netdev_tx_status = NETDEV_TX_OK;
1327         } else {
1328                 /* In normal mode the socket-can transmission queue get
1329                  * to keep the frame so that it can be retransmitted
1330                  * later
1331                  */
1332                 *netdev_tx_status = NETDEV_TX_BUSY;
1333         }
1334         return -EBUSY;
1335 }
1336
1337 /* Notes on the tx cyclic buffer handling:
1338  *
1339  * regs->txwr   - the next slot for the driver to put data to be sent
1340  * regs->txrd   - the next slot for the device to read data
1341  * priv->eskbp  - the next slot for the driver to call can_put_echo_skb for
1342  *
1343  * grcan_start_xmit can enter more messages as long as regs->txwr does
1344  * not reach priv->eskbp (within 1 message gap)
1345  *
1346  * The device sends messages until regs->txrd reaches regs->txwr
1347  *
1348  * The interrupt calls handler calls can_put_echo_skb until
1349  * priv->eskbp reaches regs->txrd
1350  */
1351 static netdev_tx_t grcan_start_xmit(struct sk_buff *skb,
1352                                     struct net_device *dev)
1353 {
1354         struct grcan_priv *priv = netdev_priv(dev);
1355         struct grcan_registers __iomem *regs = priv->regs;
1356         struct grcan_dma *dma = &priv->dma;
1357         struct can_frame *cf = (struct can_frame *)skb->data;
1358         u32 id, txwr, txrd, space, txctrl;
1359         int slotindex;
1360         u32 *slot;
1361         u32 i, rtr, eff, dlc, tmp, err;
1362         int j, shift;
1363         unsigned long flags;
1364         u32 oneshotmode = priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT;
1365
1366         if (can_dropped_invalid_skb(dev, skb))
1367                 return NETDEV_TX_OK;
1368
1369         /* Trying to transmit in silent mode will generate error interrupts, but
1370          * this should never happen - the queue should not have been started.
1371          */
1372         if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
1373                 return NETDEV_TX_BUSY;
1374
1375         /* Reads of priv->eskbp and shut-downs of the queue needs to
1376          * be atomic towards the updates to priv->eskbp and wake-ups
1377          * of the queue in the interrupt handler.
1378          */
1379         spin_lock_irqsave(&priv->lock, flags);
1380
1381         txwr = grcan_read_reg(&regs->txwr);
1382         space = grcan_txspace(dma->tx.size, txwr, priv->eskbp);
1383
1384         slotindex = txwr / GRCAN_MSG_SIZE;
1385         slot = dma->tx.buf + txwr;
1386
1387         if (unlikely(space == 1))
1388                 netif_stop_queue(dev);
1389
1390         spin_unlock_irqrestore(&priv->lock, flags);
1391         /* End of critical section*/
1392
1393         /* This should never happen. If circular buffer is full, the
1394          * netif_stop_queue should have been stopped already.
1395          */
1396         if (unlikely(!space)) {
1397                 netdev_err(dev, "No buffer space, but queue is non-stopped.\n");
1398                 return NETDEV_TX_BUSY;
1399         }
1400
1401         /* Convert and write CAN message to DMA buffer */
1402         eff = cf->can_id & CAN_EFF_FLAG;
1403         rtr = cf->can_id & CAN_RTR_FLAG;
1404         id = cf->can_id & (eff ? CAN_EFF_MASK : CAN_SFF_MASK);
1405         dlc = cf->can_dlc;
1406         if (eff)
1407                 tmp = (id << GRCAN_MSG_EID_BIT) & GRCAN_MSG_EID;
1408         else
1409                 tmp = (id << GRCAN_MSG_BID_BIT) & GRCAN_MSG_BID;
1410         slot[0] = (eff ? GRCAN_MSG_IDE : 0) | (rtr ? GRCAN_MSG_RTR : 0) | tmp;
1411
1412         slot[1] = ((dlc << GRCAN_MSG_DLC_BIT) & GRCAN_MSG_DLC);
1413         slot[2] = 0;
1414         slot[3] = 0;
1415         for (i = 0; i < dlc; i++) {
1416                 j = GRCAN_MSG_DATA_SLOT_INDEX(i);
1417                 shift = GRCAN_MSG_DATA_SHIFT(i);
1418                 slot[j] |= cf->data[i] << shift;
1419         }
1420
1421         /* Checking that channel has not been disabled. These cases
1422          * should never happen
1423          */
1424         txctrl = grcan_read_reg(&regs->txctrl);
1425         if (!(txctrl & GRCAN_TXCTRL_ENABLE))
1426                 netdev_err(dev, "tx channel spuriously disabled\n");
1427
1428         if (oneshotmode && !(txctrl & GRCAN_TXCTRL_SINGLE))
1429                 netdev_err(dev, "one-shot mode spuriously disabled\n");
1430
1431         /* Bug workaround for old version of grcan where updating txwr
1432          * in the same clock cycle as the controller updates txrd to
1433          * the current txwr could hang the can controller
1434          */
1435         if (priv->need_txbug_workaround) {
1436                 txrd = grcan_read_reg(&regs->txrd);
1437                 if (unlikely(grcan_ring_sub(txwr, txrd, dma->tx.size) == 1)) {
1438                         netdev_tx_t txstatus;
1439
1440                         err = grcan_txbug_workaround(dev, skb, txwr,
1441                                                      oneshotmode, &txstatus);
1442                         if (err)
1443                                 return txstatus;
1444                 }
1445         }
1446
1447         /* Prepare skb for echoing. This must be after the bug workaround above
1448          * as ownership of the skb is passed on by calling can_put_echo_skb.
1449          * Returning NETDEV_TX_BUSY or accessing skb or cf after a call to
1450          * can_put_echo_skb would be an error unless other measures are
1451          * taken.
1452          */
1453         priv->txdlc[slotindex] = cf->can_dlc; /* Store dlc for statistics */
1454         can_put_echo_skb(skb, dev, slotindex);
1455
1456         /* Make sure everything is written before allowing hardware to
1457          * read from the memory
1458          */
1459         wmb();
1460
1461         /* Update write pointer to start transmission */
1462         grcan_write_reg(&regs->txwr,
1463                         grcan_ring_add(txwr, GRCAN_MSG_SIZE, dma->tx.size));
1464
1465         return NETDEV_TX_OK;
1466 }
1467
1468 /* ========== Setting up sysfs interface and module parameters ========== */
1469
1470 #define GRCAN_NOT_BOOL(unsigned_val) ((unsigned_val) > 1)
1471
1472 #define GRCAN_MODULE_PARAM(name, mtype, valcheckf, desc)                \
1473         static void grcan_sanitize_##name(struct platform_device *pd)   \
1474         {                                                               \
1475                 struct grcan_device_config grcan_default_config         \
1476                         = GRCAN_DEFAULT_DEVICE_CONFIG;                  \
1477                 if (valcheckf(grcan_module_config.name)) {              \
1478                         dev_err(&pd->dev,                               \
1479                                 "Invalid module parameter value for "   \
1480                                 #name " - setting default\n");          \
1481                         grcan_module_config.name =                      \
1482                                 grcan_default_config.name;              \
1483                 }                                                       \
1484         }                                                               \
1485         module_param_named(name, grcan_module_config.name,              \
1486                            mtype, S_IRUGO);                             \
1487         MODULE_PARM_DESC(name, desc)
1488
1489 #define GRCAN_CONFIG_ATTR(name, desc)                                   \
1490         static ssize_t grcan_store_##name(struct device *sdev,          \
1491                                           struct device_attribute *att, \
1492                                           const char *buf,              \
1493                                           size_t count)                 \
1494         {                                                               \
1495                 struct net_device *dev = to_net_dev(sdev);              \
1496                 struct grcan_priv *priv = netdev_priv(dev);             \
1497                 u8 val;                                                 \
1498                 int ret;                                                \
1499                 if (dev->flags & IFF_UP)                                \
1500                         return -EBUSY;                                  \
1501                 ret = kstrtou8(buf, 0, &val);                           \
1502                 if (ret < 0 || val > 1)                                 \
1503                         return -EINVAL;                                 \
1504                 priv->config.name = val;                                \
1505                 return count;                                           \
1506         }                                                               \
1507         static ssize_t grcan_show_##name(struct device *sdev,           \
1508                                          struct device_attribute *att,  \
1509                                          char *buf)                     \
1510         {                                                               \
1511                 struct net_device *dev = to_net_dev(sdev);              \
1512                 struct grcan_priv *priv = netdev_priv(dev);             \
1513                 return sprintf(buf, "%d\n", priv->config.name);         \
1514         }                                                               \
1515         static DEVICE_ATTR(name, S_IRUGO | S_IWUSR,                     \
1516                            grcan_show_##name,                           \
1517                            grcan_store_##name);                         \
1518         GRCAN_MODULE_PARAM(name, ushort, GRCAN_NOT_BOOL, desc)
1519
1520 /* The following configuration options are made available both via module
1521  * parameters and writable sysfs files. See the chapter about GRCAN in the
1522  * documentation for the GRLIB VHDL library for further details.
1523  */
1524 GRCAN_CONFIG_ATTR(enable0,
1525                   "Configuration of physical interface 0. Determines\n" \
1526                   "the \"Enable 0\" bit of the configuration register.\n" \
1527                   "Format: 0 | 1\nDefault: 0\n");
1528
1529 GRCAN_CONFIG_ATTR(enable1,
1530                   "Configuration of physical interface 1. Determines\n" \
1531                   "the \"Enable 1\" bit of the configuration register.\n" \
1532                   "Format: 0 | 1\nDefault: 0\n");
1533
1534 GRCAN_CONFIG_ATTR(select,
1535                   "Select which physical interface to use.\n"   \
1536                   "Format: 0 | 1\nDefault: 0\n");
1537
1538 /* The tx and rx buffer size configuration options are only available via module
1539  * parameters.
1540  */
1541 GRCAN_MODULE_PARAM(txsize, uint, GRCAN_INVALID_BUFFER_SIZE,
1542                    "Sets the size of the tx buffer.\n"                  \
1543                    "Format: <unsigned int> where (txsize & ~0x1fffc0) == 0\n" \
1544                    "Default: 1024\n");
1545 GRCAN_MODULE_PARAM(rxsize, uint, GRCAN_INVALID_BUFFER_SIZE,
1546                    "Sets the size of the rx buffer.\n"                  \
1547                    "Format: <unsigned int> where (size & ~0x1fffc0) == 0\n" \
1548                    "Default: 1024\n");
1549
1550 /* Function that makes sure that configuration done using
1551  * module parameters are set to valid values
1552  */
1553 static void grcan_sanitize_module_config(struct platform_device *ofdev)
1554 {
1555         grcan_sanitize_enable0(ofdev);
1556         grcan_sanitize_enable1(ofdev);
1557         grcan_sanitize_select(ofdev);
1558         grcan_sanitize_txsize(ofdev);
1559         grcan_sanitize_rxsize(ofdev);
1560 }
1561
1562 static const struct attribute *const sysfs_grcan_attrs[] = {
1563         /* Config attrs */
1564         &dev_attr_enable0.attr,
1565         &dev_attr_enable1.attr,
1566         &dev_attr_select.attr,
1567         NULL,
1568 };
1569
1570 static const struct attribute_group sysfs_grcan_group = {
1571         .name   = "grcan",
1572         .attrs  = (struct attribute **)sysfs_grcan_attrs,
1573 };
1574
1575 /* ========== Setting up the driver ========== */
1576
1577 static const struct net_device_ops grcan_netdev_ops = {
1578         .ndo_open       = grcan_open,
1579         .ndo_stop       = grcan_close,
1580         .ndo_start_xmit = grcan_start_xmit,
1581         .ndo_change_mtu = can_change_mtu,
1582 };
1583
1584 static int grcan_setup_netdev(struct platform_device *ofdev,
1585                               void __iomem *base,
1586                               int irq, u32 ambafreq, bool txbug)
1587 {
1588         struct net_device *dev;
1589         struct grcan_priv *priv;
1590         struct grcan_registers __iomem *regs;
1591         int err;
1592
1593         dev = alloc_candev(sizeof(struct grcan_priv), 0);
1594         if (!dev)
1595                 return -ENOMEM;
1596
1597         dev->irq = irq;
1598         dev->flags |= IFF_ECHO;
1599         dev->netdev_ops = &grcan_netdev_ops;
1600         dev->sysfs_groups[0] = &sysfs_grcan_group;
1601
1602         priv = netdev_priv(dev);
1603         memcpy(&priv->config, &grcan_module_config,
1604                sizeof(struct grcan_device_config));
1605         priv->dev = dev;
1606         priv->regs = base;
1607         priv->can.bittiming_const = &grcan_bittiming_const;
1608         priv->can.do_set_bittiming = grcan_set_bittiming;
1609         priv->can.do_set_mode = grcan_set_mode;
1610         priv->can.do_get_berr_counter = grcan_get_berr_counter;
1611         priv->can.clock.freq = ambafreq;
1612         priv->can.ctrlmode_supported =
1613                 CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_ONE_SHOT;
1614         priv->need_txbug_workaround = txbug;
1615
1616         /* Discover if triple sampling is supported by hardware */
1617         regs = priv->regs;
1618         grcan_set_bits(&regs->ctrl, GRCAN_CTRL_RESET);
1619         grcan_set_bits(&regs->conf, GRCAN_CONF_SAM);
1620         if (grcan_read_bits(&regs->conf, GRCAN_CONF_SAM)) {
1621                 priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
1622                 dev_dbg(&ofdev->dev, "Hardware supports triple-sampling\n");
1623         }
1624
1625         spin_lock_init(&priv->lock);
1626
1627         if (priv->need_txbug_workaround) {
1628                 init_timer(&priv->rr_timer);
1629                 priv->rr_timer.function = grcan_running_reset;
1630                 priv->rr_timer.data = (unsigned long)dev;
1631
1632                 init_timer(&priv->hang_timer);
1633                 priv->hang_timer.function = grcan_initiate_running_reset;
1634                 priv->hang_timer.data = (unsigned long)dev;
1635         }
1636
1637         netif_napi_add(dev, &priv->napi, grcan_poll, GRCAN_NAPI_WEIGHT);
1638
1639         SET_NETDEV_DEV(dev, &ofdev->dev);
1640         dev_info(&ofdev->dev, "regs=0x%p, irq=%d, clock=%d\n",
1641                  priv->regs, dev->irq, priv->can.clock.freq);
1642
1643         err = register_candev(dev);
1644         if (err)
1645                 goto exit_free_candev;
1646
1647         platform_set_drvdata(ofdev, dev);
1648
1649         /* Reset device to allow bit-timing to be set. No need to call
1650          * grcan_reset at this stage. That is done in grcan_open.
1651          */
1652         grcan_write_reg(&regs->ctrl, GRCAN_CTRL_RESET);
1653
1654         return 0;
1655 exit_free_candev:
1656         free_candev(dev);
1657         return err;
1658 }
1659
1660 static int grcan_probe(struct platform_device *ofdev)
1661 {
1662         struct device_node *np = ofdev->dev.of_node;
1663         struct resource *res;
1664         u32 sysid, ambafreq;
1665         int irq, err;
1666         void __iomem *base;
1667         bool txbug = true;
1668
1669         /* Compare GRLIB version number with the first that does not
1670          * have the tx bug (see start_xmit)
1671          */
1672         err = of_property_read_u32(np, "systemid", &sysid);
1673         if (!err && ((sysid & GRLIB_VERSION_MASK)
1674                      >= GRCAN_TXBUG_SAFE_GRLIB_VERSION))
1675                 txbug = false;
1676
1677         err = of_property_read_u32(np, "freq", &ambafreq);
1678         if (err) {
1679                 dev_err(&ofdev->dev, "unable to fetch \"freq\" property\n");
1680                 goto exit_error;
1681         }
1682
1683         res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
1684         base = devm_ioremap_resource(&ofdev->dev, res);
1685         if (IS_ERR(base)) {
1686                 err = PTR_ERR(base);
1687                 goto exit_error;
1688         }
1689
1690         irq = irq_of_parse_and_map(np, GRCAN_IRQIX_IRQ);
1691         if (!irq) {
1692                 dev_err(&ofdev->dev, "no irq found\n");
1693                 err = -ENODEV;
1694                 goto exit_error;
1695         }
1696
1697         grcan_sanitize_module_config(ofdev);
1698
1699         err = grcan_setup_netdev(ofdev, base, irq, ambafreq, txbug);
1700         if (err)
1701                 goto exit_dispose_irq;
1702
1703         return 0;
1704
1705 exit_dispose_irq:
1706         irq_dispose_mapping(irq);
1707 exit_error:
1708         dev_err(&ofdev->dev,
1709                 "%s socket CAN driver initialization failed with error %d\n",
1710                 DRV_NAME, err);
1711         return err;
1712 }
1713
1714 static int grcan_remove(struct platform_device *ofdev)
1715 {
1716         struct net_device *dev = platform_get_drvdata(ofdev);
1717         struct grcan_priv *priv = netdev_priv(dev);
1718
1719         unregister_candev(dev); /* Will in turn call grcan_close */
1720
1721         irq_dispose_mapping(dev->irq);
1722         netif_napi_del(&priv->napi);
1723         free_candev(dev);
1724
1725         return 0;
1726 }
1727
1728 static const struct of_device_id grcan_match[] = {
1729         {.name = "GAISLER_GRCAN"},
1730         {.name = "01_03d"},
1731         {.name = "GAISLER_GRHCAN"},
1732         {.name = "01_034"},
1733         {},
1734 };
1735
1736 MODULE_DEVICE_TABLE(of, grcan_match);
1737
1738 static struct platform_driver grcan_driver = {
1739         .driver = {
1740                 .name = DRV_NAME,
1741                 .of_match_table = grcan_match,
1742         },
1743         .probe = grcan_probe,
1744         .remove = grcan_remove,
1745 };
1746
1747 module_platform_driver(grcan_driver);
1748
1749 MODULE_AUTHOR("Aeroflex Gaisler AB.");
1750 MODULE_DESCRIPTION("Socket CAN driver for Aeroflex Gaisler GRCAN");
1751 MODULE_LICENSE("GPL");