Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / arcnet / rfc1051.c
1 /*
2  * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
3  * 
4  * Written 1994-1999 by Avery Pennarun.
5  * Derived from skeleton.c by Donald Becker.
6  *
7  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8  *  for sponsoring the further development of this driver.
9  *
10  * **********************
11  *
12  * The original copyright of skeleton.c was as follows:
13  *
14  * skeleton.c Written 1993 by Donald Becker.
15  * Copyright 1993 United States Government as represented by the
16  * Director, National Security Agency.  This software may only be used
17  * and distributed according to the terms of the GNU General Public License as
18  * modified by SRC, incorporated herein by reference.
19  *
20  * **********************
21  *
22  * For more details, see drivers/net/arcnet.c
23  *
24  * **********************
25  */
26 #include <linux/module.h>
27 #include <linux/gfp.h>
28 #include <linux/init.h>
29 #include <linux/if_arp.h>
30 #include <net/arp.h>
31 #include <linux/netdevice.h>
32 #include <linux/skbuff.h>
33 #include <linux/arcdevice.h>
34
35 #define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n"
36
37
38 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
39 static void rx(struct net_device *dev, int bufnum,
40                struct archdr *pkthdr, int length);
41 static int build_header(struct sk_buff *skb, struct net_device *dev,
42                         unsigned short type, uint8_t daddr);
43 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
44                       int bufnum);
45
46
47 static struct ArcProto rfc1051_proto =
48 {
49         .suffix         = 's',
50         .mtu            = XMTU - RFC1051_HDR_SIZE,
51         .is_ip          = 1,
52         .rx             = rx,
53         .build_header   = build_header,
54         .prepare_tx     = prepare_tx,
55         .continue_tx    = NULL,
56         .ack_tx         = NULL
57 };
58
59
60 static int __init arcnet_rfc1051_init(void)
61 {
62         printk(VERSION);
63
64         arc_proto_map[ARC_P_IP_RFC1051]
65             = arc_proto_map[ARC_P_ARP_RFC1051]
66             = &rfc1051_proto;
67
68         /* if someone else already owns the broadcast, we won't take it */
69         if (arc_bcast_proto == arc_proto_default)
70                 arc_bcast_proto = &rfc1051_proto;
71
72         return 0;
73 }
74
75 static void __exit arcnet_rfc1051_exit(void)
76 {
77         arcnet_unregister_proto(&rfc1051_proto);
78 }
79
80 module_init(arcnet_rfc1051_init);
81 module_exit(arcnet_rfc1051_exit);
82
83 MODULE_LICENSE("GPL");
84
85 /*
86  * Determine a packet's protocol ID.
87  * 
88  * With ARCnet we have to convert everything to Ethernet-style stuff.
89  */
90 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
91 {
92         struct archdr *pkt = (struct archdr *) skb->data;
93         struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
94         int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
95
96         /* Pull off the arcnet header. */
97         skb_reset_mac_header(skb);
98         skb_pull(skb, hdr_size);
99
100         if (pkt->hard.dest == 0)
101                 skb->pkt_type = PACKET_BROADCAST;
102         else if (dev->flags & IFF_PROMISC) {
103                 /* if we're not sending to ourselves :) */
104                 if (pkt->hard.dest != dev->dev_addr[0])
105                         skb->pkt_type = PACKET_OTHERHOST;
106         }
107         /* now return the protocol number */
108         switch (soft->proto) {
109         case ARC_P_IP_RFC1051:
110                 return htons(ETH_P_IP);
111         case ARC_P_ARP_RFC1051:
112                 return htons(ETH_P_ARP);
113
114         default:
115                 dev->stats.rx_errors++;
116                 dev->stats.rx_crc_errors++;
117                 return 0;
118         }
119
120         return htons(ETH_P_IP);
121 }
122
123
124 /* packet receiver */
125 static void rx(struct net_device *dev, int bufnum,
126                struct archdr *pkthdr, int length)
127 {
128         struct arcnet_local *lp = netdev_priv(dev);
129         struct sk_buff *skb;
130         struct archdr *pkt = pkthdr;
131         int ofs;
132
133         BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
134
135         if (length >= MinTU)
136                 ofs = 512 - length;
137         else
138                 ofs = 256 - length;
139
140         skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
141         if (skb == NULL) {
142                 BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
143                 dev->stats.rx_dropped++;
144                 return;
145         }
146         skb_put(skb, length + ARC_HDR_SIZE);
147         skb->dev = dev;
148
149         pkt = (struct archdr *) skb->data;
150
151         /* up to sizeof(pkt->soft) has already been copied from the card */
152         memcpy(pkt, pkthdr, sizeof(struct archdr));
153         if (length > sizeof(pkt->soft))
154                 lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
155                                       pkt->soft.raw + sizeof(pkt->soft),
156                                       length - sizeof(pkt->soft));
157
158         BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
159
160         skb->protocol = type_trans(skb, dev);
161         netif_rx(skb);
162 }
163
164
165 /*
166  * Create the ARCnet hard/soft headers for RFC1051.
167  */
168 static int build_header(struct sk_buff *skb, struct net_device *dev,
169                         unsigned short type, uint8_t daddr)
170 {
171         int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
172         struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
173         struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
174
175         /* set the protocol ID according to RFC1051 */
176         switch (type) {
177         case ETH_P_IP:
178                 soft->proto = ARC_P_IP_RFC1051;
179                 break;
180         case ETH_P_ARP:
181                 soft->proto = ARC_P_ARP_RFC1051;
182                 break;
183         default:
184                 BUGMSG(D_NORMAL, "RFC1051: I don't understand protocol %d (%Xh)\n",
185                        type, type);
186                 dev->stats.tx_errors++;
187                 dev->stats.tx_aborted_errors++;
188                 return 0;
189         }
190
191
192         /*
193          * Set the source hardware address.
194          *
195          * This is pretty pointless for most purposes, but it can help in
196          * debugging.  ARCnet does not allow us to change the source address in
197          * the actual packet sent)
198          */
199         pkt->hard.source = *dev->dev_addr;
200
201         /* see linux/net/ethernet/eth.c to see where I got the following */
202
203         if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
204                 /* 
205                  * FIXME: fill in the last byte of the dest ipaddr here to better
206                  * comply with RFC1051 in "noarp" mode.
207                  */
208                 pkt->hard.dest = 0;
209                 return hdr_size;
210         }
211         /* otherwise, just fill it in and go! */
212         pkt->hard.dest = daddr;
213
214         return hdr_size;        /* success */
215 }
216
217
218 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
219                       int bufnum)
220 {
221         struct arcnet_local *lp = netdev_priv(dev);
222         struct arc_hardware *hard = &pkt->hard;
223         int ofs;
224
225         BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
226                lp->next_tx, lp->cur_tx, bufnum);
227
228         length -= ARC_HDR_SIZE; /* hard header is not included in packet length */
229
230         if (length > XMTU) {
231                 /* should never happen! other people already check for this. */
232                 BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
233                        length, XMTU);
234                 length = XMTU;
235         }
236         if (length > MinTU) {
237                 hard->offset[0] = 0;
238                 hard->offset[1] = ofs = 512 - length;
239         } else if (length > MTU) {
240                 hard->offset[0] = 0;
241                 hard->offset[1] = ofs = 512 - length - 3;
242         } else
243                 hard->offset[0] = ofs = 256 - length;
244
245         lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
246         lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
247
248         lp->lastload_dest = hard->dest;
249
250         return 1;               /* done */
251 }