kernel/drivers/mmc/host/s3cmci.c

   1 /*
   2  *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
   3  *
   4  *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
   5  *
   6  * Current driver maintained by Ben Dooks and Simtec Electronics
   7  *  Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/dmaengine.h>
  16 #include <linux/dma-mapping.h>
  17 #include <linux/clk.h>
  18 #include <linux/mmc/host.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/cpufreq.h>
  21 #include <linux/debugfs.h>
  22 #include <linux/seq_file.h>
  23 #include <linux/gpio.h>
  24 #include <linux/irq.h>
  25 #include <linux/io.h>
  26
  27 #include <plat/gpio-cfg.h>
  28 #include <mach/dma.h>
  29 #include <mach/gpio-samsung.h>
  30
  31 #include <linux/platform_data/dma-s3c24xx.h>
  32 #include <linux/platform_data/mmc-s3cmci.h>
  33
  34 #include "s3cmci.h"
  35
  36 #define DRIVER_NAME "s3c-mci"
  37
  38 #define S3C2410_SDICON                  (0x00)
  39 #define S3C2410_SDIPRE                  (0x04)
  40 #define S3C2410_SDICMDARG               (0x08)
  41 #define S3C2410_SDICMDCON               (0x0C)
  42 #define S3C2410_SDICMDSTAT              (0x10)
  43 #define S3C2410_SDIRSP0                 (0x14)
  44 #define S3C2410_SDIRSP1                 (0x18)
  45 #define S3C2410_SDIRSP2                 (0x1C)
  46 #define S3C2410_SDIRSP3                 (0x20)
  47 #define S3C2410_SDITIMER                (0x24)
  48 #define S3C2410_SDIBSIZE                (0x28)
  49 #define S3C2410_SDIDCON                 (0x2C)
  50 #define S3C2410_SDIDCNT                 (0x30)
  51 #define S3C2410_SDIDSTA                 (0x34)
  52 #define S3C2410_SDIFSTA                 (0x38)
  53
  54 #define S3C2410_SDIDATA                 (0x3C)
  55 #define S3C2410_SDIIMSK                 (0x40)
  56
  57 #define S3C2440_SDIDATA                 (0x40)
  58 #define S3C2440_SDIIMSK                 (0x3C)
  59
  60 #define S3C2440_SDICON_SDRESET          (1 << 8)
  61 #define S3C2410_SDICON_SDIOIRQ          (1 << 3)
  62 #define S3C2410_SDICON_FIFORESET        (1 << 1)
  63 #define S3C2410_SDICON_CLOCKTYPE        (1 << 0)
  64
  65 #define S3C2410_SDICMDCON_LONGRSP       (1 << 10)
  66 #define S3C2410_SDICMDCON_WAITRSP       (1 << 9)
  67 #define S3C2410_SDICMDCON_CMDSTART      (1 << 8)
  68 #define S3C2410_SDICMDCON_SENDERHOST    (1 << 6)
  69 #define S3C2410_SDICMDCON_INDEX         (0x3f)
  70
  71 #define S3C2410_SDICMDSTAT_CRCFAIL      (1 << 12)
  72 #define S3C2410_SDICMDSTAT_CMDSENT      (1 << 11)
  73 #define S3C2410_SDICMDSTAT_CMDTIMEOUT   (1 << 10)
  74 #define S3C2410_SDICMDSTAT_RSPFIN       (1 << 9)
  75
  76 #define S3C2440_SDIDCON_DS_WORD         (2 << 22)
  77 #define S3C2410_SDIDCON_TXAFTERRESP     (1 << 20)
  78 #define S3C2410_SDIDCON_RXAFTERCMD      (1 << 19)
  79 #define S3C2410_SDIDCON_BLOCKMODE       (1 << 17)
  80 #define S3C2410_SDIDCON_WIDEBUS         (1 << 16)
  81 #define S3C2410_SDIDCON_DMAEN           (1 << 15)
  82 #define S3C2410_SDIDCON_STOP            (1 << 14)
  83 #define S3C2440_SDIDCON_DATSTART        (1 << 14)
  84
  85 #define S3C2410_SDIDCON_XFER_RXSTART    (2 << 12)
  86 #define S3C2410_SDIDCON_XFER_TXSTART    (3 << 12)
  87
  88 #define S3C2410_SDIDCON_BLKNUM_MASK     (0xFFF)
  89
  90 #define S3C2410_SDIDSTA_SDIOIRQDETECT   (1 << 9)
  91 #define S3C2410_SDIDSTA_FIFOFAIL        (1 << 8)
  92 #define S3C2410_SDIDSTA_CRCFAIL         (1 << 7)
  93 #define S3C2410_SDIDSTA_RXCRCFAIL       (1 << 6)
  94 #define S3C2410_SDIDSTA_DATATIMEOUT     (1 << 5)
  95 #define S3C2410_SDIDSTA_XFERFINISH      (1 << 4)
  96 #define S3C2410_SDIDSTA_TXDATAON        (1 << 1)
  97 #define S3C2410_SDIDSTA_RXDATAON        (1 << 0)
  98
  99 #define S3C2440_SDIFSTA_FIFORESET       (1 << 16)
 100 #define S3C2440_SDIFSTA_FIFOFAIL        (3 << 14)
 101 #define S3C2410_SDIFSTA_TFDET           (1 << 13)
 102 #define S3C2410_SDIFSTA_RFDET           (1 << 12)
 103 #define S3C2410_SDIFSTA_COUNTMASK       (0x7f)
 104
 105 #define S3C2410_SDIIMSK_RESPONSECRC     (1 << 17)
 106 #define S3C2410_SDIIMSK_CMDSENT         (1 << 16)
 107 #define S3C2410_SDIIMSK_CMDTIMEOUT      (1 << 15)
 108 #define S3C2410_SDIIMSK_RESPONSEND      (1 << 14)
 109 #define S3C2410_SDIIMSK_SDIOIRQ         (1 << 12)
 110 #define S3C2410_SDIIMSK_FIFOFAIL        (1 << 11)
 111 #define S3C2410_SDIIMSK_CRCSTATUS       (1 << 10)
 112 #define S3C2410_SDIIMSK_DATACRC         (1 << 9)
 113 #define S3C2410_SDIIMSK_DATATIMEOUT     (1 << 8)
 114 #define S3C2410_SDIIMSK_DATAFINISH      (1 << 7)
 115 #define S3C2410_SDIIMSK_TXFIFOHALF      (1 << 4)
 116 #define S3C2410_SDIIMSK_RXFIFOLAST      (1 << 2)
 117 #define S3C2410_SDIIMSK_RXFIFOHALF      (1 << 0)
 118
 119 enum dbg_channels {
 120         dbg_err   = (1 << 0),
 121         dbg_debug = (1 << 1),
 122         dbg_info  = (1 << 2),
 123         dbg_irq   = (1 << 3),
 124         dbg_sg    = (1 << 4),
 125         dbg_dma   = (1 << 5),
 126         dbg_pio   = (1 << 6),
 127         dbg_fail  = (1 << 7),
 128         dbg_conf  = (1 << 8),
 129 };
 130
 131 static const int dbgmap_err   = dbg_fail;
 132 static const int dbgmap_info  = dbg_info | dbg_conf;
 133 static const int dbgmap_debug = dbg_err | dbg_debug;
 134
 135 #define dbg(host, channels, args...)              \
 136         do {                                      \
 137         if (dbgmap_err & channels)                \
 138                 dev_err(&host->pdev->dev, args);  \
 139         else if (dbgmap_info & channels)          \
 140                 dev_info(&host->pdev->dev, args); \
 141         else if (dbgmap_debug & channels)         \
 142                 dev_dbg(&host->pdev->dev, args);  \
 143         } while (0)
 144
 145 static void finalize_request(struct s3cmci_host *host);
 146 static void s3cmci_send_request(struct mmc_host *mmc);
 147 static void s3cmci_reset(struct s3cmci_host *host);
 148
 149 #ifdef CONFIG_MMC_DEBUG
 150
 151 static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
 152 {
 153         u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
 154         u32 datcon, datcnt, datsta, fsta, imask;
 155
 156         con     = readl(host->base + S3C2410_SDICON);
 157         pre     = readl(host->base + S3C2410_SDIPRE);
 158         cmdarg  = readl(host->base + S3C2410_SDICMDARG);
 159         cmdcon  = readl(host->base + S3C2410_SDICMDCON);
 160         cmdsta  = readl(host->base + S3C2410_SDICMDSTAT);
 161         r0      = readl(host->base + S3C2410_SDIRSP0);
 162         r1      = readl(host->base + S3C2410_SDIRSP1);
 163         r2      = readl(host->base + S3C2410_SDIRSP2);
 164         r3      = readl(host->base + S3C2410_SDIRSP3);
 165         timer   = readl(host->base + S3C2410_SDITIMER);
 166         bsize   = readl(host->base + S3C2410_SDIBSIZE);
 167         datcon  = readl(host->base + S3C2410_SDIDCON);
 168         datcnt  = readl(host->base + S3C2410_SDIDCNT);
 169         datsta  = readl(host->base + S3C2410_SDIDSTA);
 170         fsta    = readl(host->base + S3C2410_SDIFSTA);
 171         imask   = readl(host->base + host->sdiimsk);
 172
 173         dbg(host, dbg_debug, "%s  CON:[%08x]  PRE:[%08x]  TMR:[%08x]\n",
 174                                 prefix, con, pre, timer);
 175
 176         dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
 177                                 prefix, cmdcon, cmdarg, cmdsta);
 178
 179         dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
 180                                " DSTA:[%08x] DCNT:[%08x]\n",
 181                                 prefix, datcon, fsta, datsta, datcnt);
 182
 183         dbg(host, dbg_debug, "%s   R0:[%08x]   R1:[%08x]"
 184                                "   R2:[%08x]   R3:[%08x]\n",
 185                                 prefix, r0, r1, r2, r3);
 186 }
 187
 188 static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
 189                            int stop)
 190 {
 191         snprintf(host->dbgmsg_cmd, 300,
 192                  "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
 193                  host->ccnt, (stop ? " (STOP)" : ""),
 194                  cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
 195
 196         if (cmd->data) {
 197                 snprintf(host->dbgmsg_dat, 300,
 198                          "#%u bsize:%u blocks:%u bytes:%u",
 199                          host->dcnt, cmd->data->blksz,
 200                          cmd->data->blocks,
 201                          cmd->data->blocks * cmd->data->blksz);
 202         } else {
 203                 host->dbgmsg_dat[0] = '\0';
 204         }
 205 }
 206
 207 static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
 208                         int fail)
 209 {
 210         unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
 211
 212         if (!cmd)
 213                 return;
 214
 215         if (cmd->error == 0) {
 216                 dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
 217                         host->dbgmsg_cmd, cmd->resp[0]);
 218         } else {
 219                 dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
 220                         cmd->error, host->dbgmsg_cmd, host->status);
 221         }
 222
 223         if (!cmd->data)
 224                 return;
 225
 226         if (cmd->data->error == 0) {
 227                 dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
 228         } else {
 229                 dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
 230                         cmd->data->error, host->dbgmsg_dat,
 231                         readl(host->base + S3C2410_SDIDCNT));
 232         }
 233 }
 234 #else
 235 static void dbg_dumpcmd(struct s3cmci_host *host,
 236                         struct mmc_command *cmd, int fail) { }
 237
 238 static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
 239                            int stop) { }
 240
 241 static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
 242
 243 #endif /* CONFIG_MMC_DEBUG */
 244
 245 /**
 246  * s3cmci_host_usedma - return whether the host is using dma or pio
 247  * @host: The host state
 248  *
 249  * Return true if the host is using DMA to transfer data, else false
 250  * to use PIO mode. Will return static data depending on the driver
 251  * configuration.
 252  */
 253 static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
 254 {
 255 #ifdef CONFIG_MMC_S3C_PIO
 256         return false;
 257 #else /* CONFIG_MMC_S3C_DMA */
 258         return true;
 259 #endif
 260 }
 261
 262 static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
 263 {
 264         u32 newmask;
 265
 266         newmask = readl(host->base + host->sdiimsk);
 267         newmask |= imask;
 268
 269         writel(newmask, host->base + host->sdiimsk);
 270
 271         return newmask;
 272 }
 273
 274 static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
 275 {
 276         u32 newmask;
 277
 278         newmask = readl(host->base + host->sdiimsk);
 279         newmask &= ~imask;
 280
 281         writel(newmask, host->base + host->sdiimsk);
 282
 283         return newmask;
 284 }
 285
 286 static inline void clear_imask(struct s3cmci_host *host)
 287 {
 288         u32 mask = readl(host->base + host->sdiimsk);
 289
 290         /* preserve the SDIO IRQ mask state */
 291         mask &= S3C2410_SDIIMSK_SDIOIRQ;
 292         writel(mask, host->base + host->sdiimsk);
 293 }
 294
 295 /**
 296  * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
 297  * @host: The host to check.
 298  *
 299  * Test to see if the SDIO interrupt is being signalled in case the
 300  * controller has failed to re-detect a card interrupt. Read GPE8 and
 301  * see if it is low and if so, signal a SDIO interrupt.
 302  *
 303  * This is currently called if a request is finished (we assume that the
 304  * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
 305  * already being indicated.
 306 */
 307 static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
 308 {
 309         if (host->sdio_irqen) {
 310                 if (gpio_get_value(S3C2410_GPE(8)) == 0) {
 311                         pr_debug("%s: signalling irq\n", __func__);
 312                         mmc_signal_sdio_irq(host->mmc);
 313                 }
 314         }
 315 }
 316
 317 static inline int get_data_buffer(struct s3cmci_host *host,
 318                                   u32 *bytes, u32 **pointer)
 319 {
 320         struct scatterlist *sg;
 321
 322         if (host->pio_active == XFER_NONE)
 323                 return -EINVAL;
 324
 325         if ((!host->mrq) || (!host->mrq->data))
 326                 return -EINVAL;
 327
 328         if (host->pio_sgptr >= host->mrq->data->sg_len) {
 329                 dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
 330                       host->pio_sgptr, host->mrq->data->sg_len);
 331                 return -EBUSY;
 332         }
 333         sg = &host->mrq->data->sg[host->pio_sgptr];
 334
 335         *bytes = sg->length;
 336         *pointer = sg_virt(sg);
 337
 338         host->pio_sgptr++;
 339
 340         dbg(host, dbg_sg, "new buffer (%i/%i)\n",
 341             host->pio_sgptr, host->mrq->data->sg_len);
 342
 343         return 0;
 344 }
 345
 346 static inline u32 fifo_count(struct s3cmci_host *host)
 347 {
 348         u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
 349
 350         fifostat &= S3C2410_SDIFSTA_COUNTMASK;
 351         return fifostat;
 352 }
 353
 354 static inline u32 fifo_free(struct s3cmci_host *host)
 355 {
 356         u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
 357
 358         fifostat &= S3C2410_SDIFSTA_COUNTMASK;
 359         return 63 - fifostat;
 360 }
 361
 362 /**
 363  * s3cmci_enable_irq - enable IRQ, after having disabled it.
 364  * @host: The device state.
 365  * @more: True if more IRQs are expected from transfer.
 366  *
 367  * Enable the main IRQ if needed after it has been disabled.
 368  *
 369  * The IRQ can be one of the following states:
 370  *      - disabled during IDLE
 371  *      - disabled whilst processing data
 372  *      - enabled during transfer
 373  *      - enabled whilst awaiting SDIO interrupt detection
 374  */
 375 static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
 376 {
 377         unsigned long flags;
 378         bool enable = false;
 379
 380         local_irq_save(flags);
 381
 382         host->irq_enabled = more;
 383         host->irq_disabled = false;
 384
 385         enable = more | host->sdio_irqen;
 386
 387         if (host->irq_state != enable) {
 388                 host->irq_state = enable;
 389
 390                 if (enable)
 391                         enable_irq(host->irq);
 392                 else
 393                         disable_irq(host->irq);
 394         }
 395
 396         local_irq_restore(flags);
 397 }
 398
 399 /**
 400  *
 401  */
 402 static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
 403 {
 404         unsigned long flags;
 405
 406         local_irq_save(flags);
 407
 408         /* pr_debug("%s: transfer %d\n", __func__, transfer); */
 409
 410         host->irq_disabled = transfer;
 411
 412         if (transfer && host->irq_state) {
 413                 host->irq_state = false;
 414                 disable_irq(host->irq);
 415         }
 416
 417         local_irq_restore(flags);
 418 }
 419
 420 static void do_pio_read(struct s3cmci_host *host)
 421 {
 422         int res;
 423         u32 fifo;
 424         u32 *ptr;
 425         u32 fifo_words;
 426         void __iomem *from_ptr;
 427
 428         /* write real prescaler to host, it might be set slow to fix */
 429         writel(host->prescaler, host->base + S3C2410_SDIPRE);
 430
 431         from_ptr = host->base + host->sdidata;
 432
 433         while ((fifo = fifo_count(host))) {
 434                 if (!host->pio_bytes) {
 435                         res = get_data_buffer(host, &host->pio_bytes,
 436                                               &host->pio_ptr);
 437                         if (res) {
 438                                 host->pio_active = XFER_NONE;
 439                                 host->complete_what = COMPLETION_FINALIZE;
 440
 441                                 dbg(host, dbg_pio, "pio_read(): "
 442                                     "complete (no more data).\n");
 443                                 return;
 444                         }
 445
 446                         dbg(host, dbg_pio,
 447                             "pio_read(): new target: [%i]@[%p]\n",
 448                             host->pio_bytes, host->pio_ptr);
 449                 }
 450
 451                 dbg(host, dbg_pio,
 452                     "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
 453                     fifo, host->pio_bytes,
 454                     readl(host->base + S3C2410_SDIDCNT));
 455
 456                 /* If we have reached the end of the block, we can
 457                  * read a word and get 1 to 3 bytes.  If we in the
 458                  * middle of the block, we have to read full words,
 459                  * otherwise we will write garbage, so round down to
 460                  * an even multiple of 4. */
 461                 if (fifo >= host->pio_bytes)
 462                         fifo = host->pio_bytes;
 463                 else
 464                         fifo -= fifo & 3;
 465
 466                 host->pio_bytes -= fifo;
 467                 host->pio_count += fifo;
 468
 469                 fifo_words = fifo >> 2;
 470                 ptr = host->pio_ptr;
 471                 while (fifo_words--)
 472                         *ptr++ = readl(from_ptr);
 473                 host->pio_ptr = ptr;
 474
 475                 if (fifo & 3) {
 476                         u32 n = fifo & 3;
 477                         u32 data = readl(from_ptr);
 478                         u8 *p = (u8 *)host->pio_ptr;
 479
 480                         while (n--) {
 481                                 *p++ = data;
 482                                 data >>= 8;
 483                         }
 484                 }
 485         }
 486
 487         if (!host->pio_bytes) {
 488                 res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr);
 489                 if (res) {
 490                         dbg(host, dbg_pio,
 491                             "pio_read(): complete (no more buffers).\n");
 492                         host->pio_active = XFER_NONE;
 493                         host->complete_what = COMPLETION_FINALIZE;
 494
 495                         return;
 496                 }
 497         }
 498
 499         enable_imask(host,
 500                      S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
 501 }
 502
 503 static void do_pio_write(struct s3cmci_host *host)
 504 {
 505         void __iomem *to_ptr;
 506         int res;
 507         u32 fifo;
 508         u32 *ptr;
 509
 510         to_ptr = host->base + host->sdidata;
 511
 512         while ((fifo = fifo_free(host)) > 3) {
 513                 if (!host->pio_bytes) {
 514                         res = get_data_buffer(host, &host->pio_bytes,
 515                                                         &host->pio_ptr);
 516                         if (res) {
 517                                 dbg(host, dbg_pio,
 518                                     "pio_write(): complete (no more data).\n");
 519                                 host->pio_active = XFER_NONE;
 520
 521                                 return;
 522                         }
 523
 524                         dbg(host, dbg_pio,
 525                             "pio_write(): new source: [%i]@[%p]\n",
 526                             host->pio_bytes, host->pio_ptr);
 527
 528                 }
 529
 530                 /* If we have reached the end of the block, we have to
 531                  * write exactly the remaining number of bytes.  If we
 532                  * in the middle of the block, we have to write full
 533                  * words, so round down to an even multiple of 4. */
 534                 if (fifo >= host->pio_bytes)
 535                         fifo = host->pio_bytes;
 536                 else
 537                         fifo -= fifo & 3;
 538
 539                 host->pio_bytes -= fifo;
 540                 host->pio_count += fifo;
 541
 542                 fifo = (fifo + 3) >> 2;
 543                 ptr = host->pio_ptr;
 544                 while (fifo--)
 545                         writel(*ptr++, to_ptr);
 546                 host->pio_ptr = ptr;
 547         }
 548
 549         enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
 550 }
 551
 552 static void pio_tasklet(unsigned long data)
 553 {
 554         struct s3cmci_host *host = (struct s3cmci_host *) data;
 555
 556         s3cmci_disable_irq(host, true);
 557
 558         if (host->pio_active == XFER_WRITE)
 559                 do_pio_write(host);
 560
 561         if (host->pio_active == XFER_READ)
 562                 do_pio_read(host);
 563
 564         if (host->complete_what == COMPLETION_FINALIZE) {
 565                 clear_imask(host);
 566                 if (host->pio_active != XFER_NONE) {
 567                         dbg(host, dbg_err, "unfinished %s "
 568                             "- pio_count:[%u] pio_bytes:[%u]\n",
 569                             (host->pio_active == XFER_READ) ? "read" : "write",
 570                             host->pio_count, host->pio_bytes);
 571
 572                         if (host->mrq->data)
 573                                 host->mrq->data->error = -EINVAL;
 574                 }
 575
 576                 s3cmci_enable_irq(host, false);
 577                 finalize_request(host);
 578         } else
 579                 s3cmci_enable_irq(host, true);
 580 }
 581
 582 /*
 583  * ISR for SDI Interface IRQ
 584  * Communication between driver and ISR works as follows:
 585  *   host->mrq                  points to current request
 586  *   host->complete_what        Indicates when the request is considered done
 587  *     COMPLETION_CMDSENT         when the command was sent
 588  *     COMPLETION_RSPFIN          when a response was received
 589  *     COMPLETION_XFERFINISH      when the data transfer is finished
 590  *     COMPLETION_XFERFINISH_RSPFIN both of the above.
 591  *   host->complete_request     is the completion-object the driver waits for
 592  *
 593  * 1) Driver sets up host->mrq and host->complete_what
 594  * 2) Driver prepares the transfer
 595  * 3) Driver enables interrupts
 596  * 4) Driver starts transfer
 597  * 5) Driver waits for host->complete_rquest
 598  * 6) ISR checks for request status (errors and success)
 599  * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
 600  * 7) ISR completes host->complete_request
 601  * 8) ISR disables interrupts
 602  * 9) Driver wakes up and takes care of the request
 603  *
 604  * Note: "->error"-fields are expected to be set to 0 before the request
 605  *       was issued by mmc.c - therefore they are only set, when an error
 606  *       contition comes up
 607  */
 608
 609 static irqreturn_t s3cmci_irq(int irq, void *dev_id)
 610 {
 611         struct s3cmci_host *host = dev_id;
 612         struct mmc_command *cmd;
 613         u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
 614         u32 mci_cclear = 0, mci_dclear;
 615         unsigned long iflags;
 616
 617         mci_dsta = readl(host->base + S3C2410_SDIDSTA);
 618         mci_imsk = readl(host->base + host->sdiimsk);
 619
 620         if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
 621                 if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
 622                         mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
 623                         writel(mci_dclear, host->base + S3C2410_SDIDSTA);
 624
 625                         mmc_signal_sdio_irq(host->mmc);
 626                         return IRQ_HANDLED;
 627                 }
 628         }
 629
 630         spin_lock_irqsave(&host->complete_lock, iflags);
 631
 632         mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
 633         mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
 634         mci_fsta = readl(host->base + S3C2410_SDIFSTA);
 635         mci_dclear = 0;
 636
 637         if ((host->complete_what == COMPLETION_NONE) ||
 638             (host->complete_what == COMPLETION_FINALIZE)) {
 639                 host->status = "nothing to complete";
 640                 clear_imask(host);
 641                 goto irq_out;
 642         }
 643
 644         if (!host->mrq) {
 645                 host->status = "no active mrq";
 646                 clear_imask(host);
 647                 goto irq_out;
 648         }
 649
 650         cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
 651
 652         if (!cmd) {
 653                 host->status = "no active cmd";
 654                 clear_imask(host);
 655                 goto irq_out;
 656         }
 657
 658         if (!s3cmci_host_usedma(host)) {
 659                 if ((host->pio_active == XFER_WRITE) &&
 660                     (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
 661
 662                         disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
 663                         tasklet_schedule(&host->pio_tasklet);
 664                         host->status = "pio tx";
 665                 }
 666
 667                 if ((host->pio_active == XFER_READ) &&
 668                     (mci_fsta & S3C2410_SDIFSTA_RFDET)) {
 669
 670                         disable_imask(host,
 671                                       S3C2410_SDIIMSK_RXFIFOHALF |
 672                                       S3C2410_SDIIMSK_RXFIFOLAST);
 673
 674                         tasklet_schedule(&host->pio_tasklet);
 675                         host->status = "pio rx";
 676                 }
 677         }
 678
 679         if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
 680                 dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
 681                 cmd->error = -ETIMEDOUT;
 682                 host->status = "error: command timeout";
 683                 goto fail_transfer;
 684         }
 685
 686         if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
 687                 if (host->complete_what == COMPLETION_CMDSENT) {
 688                         host->status = "ok: command sent";
 689                         goto close_transfer;
 690                 }
 691
 692                 mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
 693         }
 694
 695         if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
 696                 if (cmd->flags & MMC_RSP_CRC) {
 697                         if (host->mrq->cmd->flags & MMC_RSP_136) {
 698                                 dbg(host, dbg_irq,
 699                                     "fixup: ignore CRC fail with long rsp\n");
 700                         } else {
 701                                 /* note, we used to fail the transfer
 702                                  * here, but it seems that this is just
 703                                  * the hardware getting it wrong.
 704                                  *
 705                                  * cmd->error = -EILSEQ;
 706                                  * host->status = "error: bad command crc";
 707                                  * goto fail_transfer;
 708                                 */
 709                         }
 710                 }
 711
 712                 mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
 713         }
 714
 715         if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
 716                 if (host->complete_what == COMPLETION_RSPFIN) {
 717                         host->status = "ok: command response received";
 718                         goto close_transfer;
 719                 }
 720
 721                 if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
 722                         host->complete_what = COMPLETION_XFERFINISH;
 723
 724                 mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
 725         }
 726
 727         /* errors handled after this point are only relevant
 728            when a data transfer is in progress */
 729
 730         if (!cmd->data)
 731                 goto clear_status_bits;
 732
 733         /* Check for FIFO failure */
 734         if (host->is2440) {
 735                 if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
 736                         dbg(host, dbg_err, "FIFO failure\n");
 737                         host->mrq->data->error = -EILSEQ;
 738                         host->status = "error: 2440 fifo failure";
 739                         goto fail_transfer;
 740                 }
 741         } else {
 742                 if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
 743                         dbg(host, dbg_err, "FIFO failure\n");
 744                         cmd->data->error = -EILSEQ;
 745                         host->status = "error:  fifo failure";
 746                         goto fail_transfer;
 747                 }
 748         }
 749
 750         if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
 751                 dbg(host, dbg_err, "bad data crc (outgoing)\n");
 752                 cmd->data->error = -EILSEQ;
 753                 host->status = "error: bad data crc (outgoing)";
 754                 goto fail_transfer;
 755         }
 756
 757         if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
 758                 dbg(host, dbg_err, "bad data crc (incoming)\n");
 759                 cmd->data->error = -EILSEQ;
 760                 host->status = "error: bad data crc (incoming)";
 761                 goto fail_transfer;
 762         }
 763
 764         if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
 765                 dbg(host, dbg_err, "data timeout\n");
 766                 cmd->data->error = -ETIMEDOUT;
 767                 host->status = "error: data timeout";
 768                 goto fail_transfer;
 769         }
 770
 771         if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
 772                 if (host->complete_what == COMPLETION_XFERFINISH) {
 773                         host->status = "ok: data transfer completed";
 774                         goto close_transfer;
 775                 }
 776
 777                 if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
 778                         host->complete_what = COMPLETION_RSPFIN;
 779
 780                 mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
 781         }
 782
 783 clear_status_bits:
 784         writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
 785         writel(mci_dclear, host->base + S3C2410_SDIDSTA);
 786
 787         goto irq_out;
 788
 789 fail_transfer:
 790         host->pio_active = XFER_NONE;
 791
 792 close_transfer:
 793         host->complete_what = COMPLETION_FINALIZE;
 794
 795         clear_imask(host);
 796         tasklet_schedule(&host->pio_tasklet);
 797
 798         goto irq_out;
 799
 800 irq_out:
 801         dbg(host, dbg_irq,
 802             "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
 803             mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
 804
 805         spin_unlock_irqrestore(&host->complete_lock, iflags);
 806         return IRQ_HANDLED;
 807
 808 }
 809
 810 /*
 811  * ISR for the CardDetect Pin
 812 */
 813
 814 static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
 815 {
 816         struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
 817
 818         dbg(host, dbg_irq, "card detect\n");
 819
 820         mmc_detect_change(host->mmc, msecs_to_jiffies(500));
 821
 822         return IRQ_HANDLED;
 823 }
 824
 825 static void s3cmci_dma_done_callback(void *arg)
 826 {
 827         struct s3cmci_host *host = arg;
 828         unsigned long iflags;
 829
 830         BUG_ON(!host->mrq);
 831         BUG_ON(!host->mrq->data);
 832
 833         spin_lock_irqsave(&host->complete_lock, iflags);
 834
 835         dbg(host, dbg_dma, "DMA FINISHED\n");
 836
 837         host->dma_complete = 1;
 838         host->complete_what = COMPLETION_FINALIZE;
 839
 840         tasklet_schedule(&host->pio_tasklet);
 841         spin_unlock_irqrestore(&host->complete_lock, iflags);
 842
 843 }
 844
 845 static void finalize_request(struct s3cmci_host *host)
 846 {
 847         struct mmc_request *mrq = host->mrq;
 848         struct mmc_command *cmd;
 849         int debug_as_failure = 0;
 850
 851         if (host->complete_what != COMPLETION_FINALIZE)
 852                 return;
 853
 854         if (!mrq)
 855                 return;
 856         cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
 857
 858         if (cmd->data && (cmd->error == 0) &&
 859             (cmd->data->error == 0)) {
 860                 if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
 861                         dbg(host, dbg_dma, "DMA Missing (%d)!\n",
 862                             host->dma_complete);
 863                         return;
 864                 }
 865         }
 866
 867         /* Read response from controller. */
 868         cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
 869         cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
 870         cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
 871         cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
 872
 873         writel(host->prescaler, host->base + S3C2410_SDIPRE);
 874
 875         if (cmd->error)
 876                 debug_as_failure = 1;
 877
 878         if (cmd->data && cmd->data->error)
 879                 debug_as_failure = 1;
 880
 881         dbg_dumpcmd(host, cmd, debug_as_failure);
 882
 883         /* Cleanup controller */
 884         writel(0, host->base + S3C2410_SDICMDARG);
 885         writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
 886         writel(0, host->base + S3C2410_SDICMDCON);
 887         clear_imask(host);
 888
 889         if (cmd->data && cmd->error)
 890                 cmd->data->error = cmd->error;
 891
 892         if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
 893                 host->cmd_is_stop = 1;
 894                 s3cmci_send_request(host->mmc);
 895                 return;
 896         }
 897
 898         /* If we have no data transfer we are finished here */
 899         if (!mrq->data)
 900                 goto request_done;
 901
 902         /* Calculate the amout of bytes transfer if there was no error */
 903         if (mrq->data->error == 0) {
 904                 mrq->data->bytes_xfered =
 905                         (mrq->data->blocks * mrq->data->blksz);
 906         } else {
 907                 mrq->data->bytes_xfered = 0;
 908         }
 909
 910         /* If we had an error while transferring data we flush the
 911          * DMA channel and the fifo to clear out any garbage. */
 912         if (mrq->data->error != 0) {
 913                 if (s3cmci_host_usedma(host))
 914                         dmaengine_terminate_all(host->dma);
 915
 916                 if (host->is2440) {
 917                         /* Clear failure register and reset fifo. */
 918                         writel(S3C2440_SDIFSTA_FIFORESET |
 919                                S3C2440_SDIFSTA_FIFOFAIL,
 920                                host->base + S3C2410_SDIFSTA);
 921                 } else {
 922                         u32 mci_con;
 923
 924                         /* reset fifo */
 925                         mci_con = readl(host->base + S3C2410_SDICON);
 926                         mci_con |= S3C2410_SDICON_FIFORESET;
 927
 928                         writel(mci_con, host->base + S3C2410_SDICON);
 929                 }
 930         }
 931
 932 request_done:
 933         host->complete_what = COMPLETION_NONE;
 934         host->mrq = NULL;
 935
 936         s3cmci_check_sdio_irq(host);
 937         mmc_request_done(host->mmc, mrq);
 938 }
 939
 940 static void s3cmci_send_command(struct s3cmci_host *host,
 941                                         struct mmc_command *cmd)
 942 {
 943         u32 ccon, imsk;
 944
 945         imsk  = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
 946                 S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
 947                 S3C2410_SDIIMSK_RESPONSECRC;
 948
 949         enable_imask(host, imsk);
 950
 951         if (cmd->data)
 952                 host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
 953         else if (cmd->flags & MMC_RSP_PRESENT)
 954                 host->complete_what = COMPLETION_RSPFIN;
 955         else
 956                 host->complete_what = COMPLETION_CMDSENT;
 957
 958         writel(cmd->arg, host->base + S3C2410_SDICMDARG);
 959
 960         ccon  = cmd->opcode & S3C2410_SDICMDCON_INDEX;
 961         ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
 962
 963         if (cmd->flags & MMC_RSP_PRESENT)
 964                 ccon |= S3C2410_SDICMDCON_WAITRSP;
 965
 966         if (cmd->flags & MMC_RSP_136)
 967                 ccon |= S3C2410_SDICMDCON_LONGRSP;
 968
 969         writel(ccon, host->base + S3C2410_SDICMDCON);
 970 }
 971
 972 static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 973 {
 974         u32 dcon, imsk, stoptries = 3;
 975
 976         /* write DCON register */
 977
 978         if (!data) {
 979                 writel(0, host->base + S3C2410_SDIDCON);
 980                 return 0;
 981         }
 982
 983         if ((data->blksz & 3) != 0) {
 984                 /* We cannot deal with unaligned blocks with more than
 985                  * one block being transferred. */
 986
 987                 if (data->blocks > 1) {
 988                         pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
 989                                 __func__, data->blksz);
 990                         return -EINVAL;
 991                 }
 992         }
 993
 994         while (readl(host->base + S3C2410_SDIDSTA) &
 995                (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
 996
 997                 dbg(host, dbg_err,
 998                     "mci_setup_data() transfer stillin progress.\n");
 999
1000                 writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
1001                 s3cmci_reset(host);
1002
1003                 if ((stoptries--) == 0) {
1004                         dbg_dumpregs(host, "DRF");
1005                         return -EINVAL;
1006                 }
1007         }
1008
1009         dcon  = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
1010
1011         if (s3cmci_host_usedma(host))
1012                 dcon |= S3C2410_SDIDCON_DMAEN;
1013
1014         if (host->bus_width == MMC_BUS_WIDTH_4)
1015                 dcon |= S3C2410_SDIDCON_WIDEBUS;
1016
1017         if (!(data->flags & MMC_DATA_STREAM))
1018                 dcon |= S3C2410_SDIDCON_BLOCKMODE;
1019
1020         if (data->flags & MMC_DATA_WRITE) {
1021                 dcon |= S3C2410_SDIDCON_TXAFTERRESP;
1022                 dcon |= S3C2410_SDIDCON_XFER_TXSTART;
1023         }
1024
1025         if (data->flags & MMC_DATA_READ) {
1026                 dcon |= S3C2410_SDIDCON_RXAFTERCMD;
1027                 dcon |= S3C2410_SDIDCON_XFER_RXSTART;
1028         }
1029
1030         if (host->is2440) {
1031                 dcon |= S3C2440_SDIDCON_DS_WORD;
1032                 dcon |= S3C2440_SDIDCON_DATSTART;
1033         }
1034
1035         writel(dcon, host->base + S3C2410_SDIDCON);
1036
1037         /* write BSIZE register */
1038
1039         writel(data->blksz, host->base + S3C2410_SDIBSIZE);
1040
1041         /* add to IMASK register */
1042         imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
1043                S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
1044
1045         enable_imask(host, imsk);
1046
1047         /* write TIMER register */
1048
1049         if (host->is2440) {
1050                 writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
1051         } else {
1052                 writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
1053
1054                 /* FIX: set slow clock to prevent timeouts on read */
1055                 if (data->flags & MMC_DATA_READ)
1056                         writel(0xFF, host->base + S3C2410_SDIPRE);
1057         }
1058
1059         return 0;
1060 }
1061
1062 #define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
1063
1064 static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
1065 {
1066         int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
1067
1068         BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1069
1070         host->pio_sgptr = 0;
1071         host->pio_bytes = 0;
1072         host->pio_count = 0;
1073         host->pio_active = rw ? XFER_WRITE : XFER_READ;
1074
1075         if (rw) {
1076                 do_pio_write(host);
1077                 enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
1078         } else {
1079                 enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
1080                              | S3C2410_SDIIMSK_RXFIFOLAST);
1081         }
1082
1083         return 0;
1084 }
1085
1086 static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
1087 {
1088         int rw = data->flags & MMC_DATA_WRITE;
1089         struct dma_async_tx_descriptor *desc;
1090         struct dma_slave_config conf = {
1091                 .src_addr = host->mem->start + host->sdidata,
1092                 .dst_addr = host->mem->start + host->sdidata,
1093                 .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
1094                 .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
1095         };
1096
1097         BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1098
1099         /* Restore prescaler value */
1100         writel(host->prescaler, host->base + S3C2410_SDIPRE);
1101
1102         if (!rw)
1103                 conf.direction = DMA_DEV_TO_MEM;
1104         else
1105                 conf.direction = DMA_MEM_TO_DEV;
1106
1107         dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
1108                              rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1109
1110         dmaengine_slave_config(host->dma, &conf);
1111         desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len,
1112                 conf.direction,
1113                 DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
1114         if (!desc)
1115                 goto unmap_exit;
1116         desc->callback = s3cmci_dma_done_callback;
1117         desc->callback_param = host;
1118         dmaengine_submit(desc);
1119         dma_async_issue_pending(host->dma);
1120
1121         return 0;
1122
1123 unmap_exit:
1124         dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
1125                              rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1126         return -ENOMEM;
1127 }
1128
1129 static void s3cmci_send_request(struct mmc_host *mmc)
1130 {
1131         struct s3cmci_host *host = mmc_priv(mmc);
1132         struct mmc_request *mrq = host->mrq;
1133         struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
1134
1135         host->ccnt++;
1136         prepare_dbgmsg(host, cmd, host->cmd_is_stop);
1137
1138         /* Clear command, data and fifo status registers
1139            Fifo clear only necessary on 2440, but doesn't hurt on 2410
1140         */
1141         writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
1142         writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
1143         writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
1144
1145         if (cmd->data) {
1146                 int res = s3cmci_setup_data(host, cmd->data);
1147
1148                 host->dcnt++;
1149
1150                 if (res) {
1151                         dbg(host, dbg_err, "setup data error %d\n", res);
1152                         cmd->error = res;
1153                         cmd->data->error = res;
1154
1155                         mmc_request_done(mmc, mrq);
1156                         return;
1157                 }
1158
1159                 if (s3cmci_host_usedma(host))
1160                         res = s3cmci_prepare_dma(host, cmd->data);
1161                 else
1162                         res = s3cmci_prepare_pio(host, cmd->data);
1163
1164                 if (res) {
1165                         dbg(host, dbg_err, "data prepare error %d\n", res);
1166                         cmd->error = res;
1167                         cmd->data->error = res;
1168
1169                         mmc_request_done(mmc, mrq);
1170                         return;
1171                 }
1172         }
1173
1174         /* Send command */
1175         s3cmci_send_command(host, cmd);
1176
1177         /* Enable Interrupt */
1178         s3cmci_enable_irq(host, true);
1179 }
1180
1181 static int s3cmci_card_present(struct mmc_host *mmc)
1182 {
1183         struct s3cmci_host *host = mmc_priv(mmc);
1184         struct s3c24xx_mci_pdata *pdata = host->pdata;
1185         int ret;
1186
1187         if (pdata->no_detect)
1188                 return -ENOSYS;
1189
1190         ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
1191         return ret ^ pdata->detect_invert;
1192 }
1193
1194 static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1195 {
1196         struct s3cmci_host *host = mmc_priv(mmc);
1197
1198         host->status = "mmc request";
1199         host->cmd_is_stop = 0;
1200         host->mrq = mrq;
1201
1202         if (s3cmci_card_present(mmc) == 0) {
1203                 dbg(host, dbg_err, "%s: no medium present\n", __func__);
1204                 host->mrq->cmd->error = -ENOMEDIUM;
1205                 mmc_request_done(mmc, mrq);
1206         } else
1207                 s3cmci_send_request(mmc);
1208 }
1209
1210 static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios)
1211 {
1212         u32 mci_psc;
1213
1214         /* Set clock */
1215         for (mci_psc = 0; mci_psc < 255; mci_psc++) {
1216                 host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
1217
1218                 if (host->real_rate <= ios->clock)
1219                         break;
1220         }
1221
1222         if (mci_psc > 255)
1223                 mci_psc = 255;
1224
1225         host->prescaler = mci_psc;
1226         writel(host->prescaler, host->base + S3C2410_SDIPRE);
1227
1228         /* If requested clock is 0, real_rate will be 0, too */
1229         if (ios->clock == 0)
1230                 host->real_rate = 0;
1231 }
1232
1233 static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1234 {
1235         struct s3cmci_host *host = mmc_priv(mmc);
1236         u32 mci_con;
1237
1238         /* Set the power state */
1239
1240         mci_con = readl(host->base + S3C2410_SDICON);
1241
1242         switch (ios->power_mode) {
1243         case MMC_POWER_ON:
1244         case MMC_POWER_UP:
1245                 /* Configure GPE5...GPE10 pins in SD mode */
1246                 s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
1247                                       S3C_GPIO_PULL_NONE);
1248
1249                 if (host->pdata->set_power)
1250                         host->pdata->set_power(ios->power_mode, ios->vdd);
1251
1252                 if (!host->is2440)
1253                         mci_con |= S3C2410_SDICON_FIFORESET;
1254
1255                 break;
1256
1257         case MMC_POWER_OFF:
1258         default:
1259                 gpio_direction_output(S3C2410_GPE(5), 0);
1260
1261                 if (host->is2440)
1262                         mci_con |= S3C2440_SDICON_SDRESET;
1263
1264                 if (host->pdata->set_power)
1265                         host->pdata->set_power(ios->power_mode, ios->vdd);
1266
1267                 break;
1268         }
1269
1270         s3cmci_set_clk(host, ios);
1271
1272         /* Set CLOCK_ENABLE */
1273         if (ios->clock)
1274                 mci_con |= S3C2410_SDICON_CLOCKTYPE;
1275         else
1276                 mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
1277
1278         writel(mci_con, host->base + S3C2410_SDICON);
1279
1280         if ((ios->power_mode == MMC_POWER_ON) ||
1281             (ios->power_mode == MMC_POWER_UP)) {
1282                 dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
1283                         host->real_rate/1000, ios->clock/1000);
1284         } else {
1285                 dbg(host, dbg_conf, "powered down.\n");
1286         }
1287
1288         host->bus_width = ios->bus_width;
1289 }
1290
1291 static void s3cmci_reset(struct s3cmci_host *host)
1292 {
1293         u32 con = readl(host->base + S3C2410_SDICON);
1294
1295         con |= S3C2440_SDICON_SDRESET;
1296         writel(con, host->base + S3C2410_SDICON);
1297 }
1298
1299 static int s3cmci_get_ro(struct mmc_host *mmc)
1300 {
1301         struct s3cmci_host *host = mmc_priv(mmc);
1302         struct s3c24xx_mci_pdata *pdata = host->pdata;
1303         int ret;
1304
1305         if (pdata->no_wprotect)
1306                 return 0;
1307
1308         ret = gpio_get_value(pdata->gpio_wprotect) ? 1 : 0;
1309         ret ^= pdata->wprotect_invert;
1310
1311         return ret;
1312 }
1313
1314 static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1315 {
1316         struct s3cmci_host *host = mmc_priv(mmc);
1317         unsigned long flags;
1318         u32 con;
1319
1320         local_irq_save(flags);
1321
1322         con = readl(host->base + S3C2410_SDICON);
1323         host->sdio_irqen = enable;
1324
1325         if (enable == host->sdio_irqen)
1326                 goto same_state;
1327
1328         if (enable) {
1329                 con |= S3C2410_SDICON_SDIOIRQ;
1330                 enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1331
1332                 if (!host->irq_state && !host->irq_disabled) {
1333                         host->irq_state = true;
1334                         enable_irq(host->irq);
1335                 }
1336         } else {
1337                 disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1338                 con &= ~S3C2410_SDICON_SDIOIRQ;
1339
1340                 if (!host->irq_enabled && host->irq_state) {
1341                         disable_irq_nosync(host->irq);
1342                         host->irq_state = false;
1343                 }
1344         }
1345
1346         writel(con, host->base + S3C2410_SDICON);
1347
1348  same_state:
1349         local_irq_restore(flags);
1350
1351         s3cmci_check_sdio_irq(host);
1352 }
1353
1354 static struct mmc_host_ops s3cmci_ops = {
1355         .request        = s3cmci_request,
1356         .set_ios        = s3cmci_set_ios,
1357         .get_ro         = s3cmci_get_ro,
1358         .get_cd         = s3cmci_card_present,
1359         .enable_sdio_irq = s3cmci_enable_sdio_irq,
1360 };
1361
1362 static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
1363         /* This is currently here to avoid a number of if (host->pdata)
1364          * checks. Any zero fields to ensure reasonable defaults are picked. */
1365          .no_wprotect = 1,
1366          .no_detect = 1,
1367 };
1368
1369 #ifdef CONFIG_CPU_FREQ
1370
1371 static int s3cmci_cpufreq_transition(struct notifier_block *nb,
1372                                      unsigned long val, void *data)
1373 {
1374         struct s3cmci_host *host;
1375         struct mmc_host *mmc;
1376         unsigned long newclk;
1377         unsigned long flags;
1378
1379         host = container_of(nb, struct s3cmci_host, freq_transition);
1380         newclk = clk_get_rate(host->clk);
1381         mmc = host->mmc;
1382
1383         if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) ||
1384             (val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) {
1385                 spin_lock_irqsave(&mmc->lock, flags);
1386
1387                 host->clk_rate = newclk;
1388
1389                 if (mmc->ios.power_mode != MMC_POWER_OFF &&
1390                     mmc->ios.clock != 0)
1391                         s3cmci_set_clk(host, &mmc->ios);
1392
1393                 spin_unlock_irqrestore(&mmc->lock, flags);
1394         }
1395
1396         return 0;
1397 }
1398
1399 static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1400 {
1401         host->freq_transition.notifier_call = s3cmci_cpufreq_transition;
1402
1403         return cpufreq_register_notifier(&host->freq_transition,
1404                                          CPUFREQ_TRANSITION_NOTIFIER);
1405 }
1406
1407 static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1408 {
1409         cpufreq_unregister_notifier(&host->freq_transition,
1410                                     CPUFREQ_TRANSITION_NOTIFIER);
1411 }
1412
1413 #else
1414 static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1415 {
1416         return 0;
1417 }
1418
1419 static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1420 {
1421 }
1422 #endif
1423
1424
1425 #ifdef CONFIG_DEBUG_FS
1426
1427 static int s3cmci_state_show(struct seq_file *seq, void *v)
1428 {
1429         struct s3cmci_host *host = seq->private;
1430
1431         seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
1432         seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
1433         seq_printf(seq, "Prescale = %d\n", host->prescaler);
1434         seq_printf(seq, "is2440 = %d\n", host->is2440);
1435         seq_printf(seq, "IRQ = %d\n", host->irq);
1436         seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
1437         seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
1438         seq_printf(seq, "IRQ state = %d\n", host->irq_state);
1439         seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
1440         seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
1441         seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
1442         seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
1443
1444         return 0;
1445 }
1446
1447 static int s3cmci_state_open(struct inode *inode, struct file *file)
1448 {
1449         return single_open(file, s3cmci_state_show, inode->i_private);
1450 }
1451
1452 static const struct file_operations s3cmci_fops_state = {
1453         .owner          = THIS_MODULE,
1454         .open           = s3cmci_state_open,
1455         .read           = seq_read,
1456         .llseek         = seq_lseek,
1457         .release        = single_release,
1458 };
1459
1460 #define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
1461
1462 struct s3cmci_reg {
1463         unsigned short  addr;
1464         unsigned char   *name;
1465 } debug_regs[] = {
1466         DBG_REG(CON),
1467         DBG_REG(PRE),
1468         DBG_REG(CMDARG),
1469         DBG_REG(CMDCON),
1470         DBG_REG(CMDSTAT),
1471         DBG_REG(RSP0),
1472         DBG_REG(RSP1),
1473         DBG_REG(RSP2),
1474         DBG_REG(RSP3),
1475         DBG_REG(TIMER),
1476         DBG_REG(BSIZE),
1477         DBG_REG(DCON),
1478         DBG_REG(DCNT),
1479         DBG_REG(DSTA),
1480         DBG_REG(FSTA),
1481         {}
1482 };
1483
1484 static int s3cmci_regs_show(struct seq_file *seq, void *v)
1485 {
1486         struct s3cmci_host *host = seq->private;
1487         struct s3cmci_reg *rptr = debug_regs;
1488
1489         for (; rptr->name; rptr++)
1490                 seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
1491                            readl(host->base + rptr->addr));
1492
1493         seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
1494
1495         return 0;
1496 }
1497
1498 static int s3cmci_regs_open(struct inode *inode, struct file *file)
1499 {
1500         return single_open(file, s3cmci_regs_show, inode->i_private);
1501 }
1502
1503 static const struct file_operations s3cmci_fops_regs = {
1504         .owner          = THIS_MODULE,
1505         .open           = s3cmci_regs_open,
1506         .read           = seq_read,
1507         .llseek         = seq_lseek,
1508         .release        = single_release,
1509 };
1510
1511 static void s3cmci_debugfs_attach(struct s3cmci_host *host)
1512 {
1513         struct device *dev = &host->pdev->dev;
1514
1515         host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
1516         if (IS_ERR(host->debug_root)) {
1517                 dev_err(dev, "failed to create debugfs root\n");
1518                 return;
1519         }
1520
1521         host->debug_state = debugfs_create_file("state", 0444,
1522                                                 host->debug_root, host,
1523                                                 &s3cmci_fops_state);
1524
1525         if (IS_ERR(host->debug_state))
1526                 dev_err(dev, "failed to create debug state file\n");
1527
1528         host->debug_regs = debugfs_create_file("regs", 0444,
1529                                                host->debug_root, host,
1530                                                &s3cmci_fops_regs);
1531
1532         if (IS_ERR(host->debug_regs))
1533                 dev_err(dev, "failed to create debug regs file\n");
1534 }
1535
1536 static void s3cmci_debugfs_remove(struct s3cmci_host *host)
1537 {
1538         debugfs_remove(host->debug_regs);
1539         debugfs_remove(host->debug_state);
1540         debugfs_remove(host->debug_root);
1541 }
1542
1543 #else
1544 static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
1545 static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
1546
1547 #endif /* CONFIG_DEBUG_FS */
1548
1549 static int s3cmci_probe(struct platform_device *pdev)
1550 {
1551         struct s3cmci_host *host;
1552         struct mmc_host *mmc;
1553         int ret;
1554         int is2440;
1555         int i;
1556
1557         is2440 = platform_get_device_id(pdev)->driver_data;
1558
1559         mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
1560         if (!mmc) {
1561                 ret = -ENOMEM;
1562                 goto probe_out;
1563         }
1564
1565         for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
1566                 ret = gpio_request(i, dev_name(&pdev->dev));
1567                 if (ret) {
1568                         dev_err(&pdev->dev, "failed to get gpio %d\n", i);
1569
1570                         for (i--; i >= S3C2410_GPE(5); i--)
1571                                 gpio_free(i);
1572
1573                         goto probe_free_host;
1574                 }
1575         }
1576
1577         host = mmc_priv(mmc);
1578         host->mmc       = mmc;
1579         host->pdev      = pdev;
1580         host->is2440    = is2440;
1581
1582         host->pdata = pdev->dev.platform_data;
1583         if (!host->pdata) {
1584                 pdev->dev.platform_data = &s3cmci_def_pdata;
1585                 host->pdata = &s3cmci_def_pdata;
1586         }
1587
1588         spin_lock_init(&host->complete_lock);
1589         tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
1590
1591         if (is2440) {
1592                 host->sdiimsk   = S3C2440_SDIIMSK;
1593                 host->sdidata   = S3C2440_SDIDATA;
1594                 host->clk_div   = 1;
1595         } else {
1596                 host->sdiimsk   = S3C2410_SDIIMSK;
1597                 host->sdidata   = S3C2410_SDIDATA;
1598                 host->clk_div   = 2;
1599         }
1600
1601         host->complete_what     = COMPLETION_NONE;
1602         host->pio_active        = XFER_NONE;
1603
1604         host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1605         if (!host->mem) {
1606                 dev_err(&pdev->dev,
1607                         "failed to get io memory region resource.\n");
1608
1609                 ret = -ENOENT;
1610                 goto probe_free_gpio;
1611         }
1612
1613         host->mem = request_mem_region(host->mem->start,
1614                                        resource_size(host->mem), pdev->name);
1615
1616         if (!host->mem) {
1617                 dev_err(&pdev->dev, "failed to request io memory region.\n");
1618                 ret = -ENOENT;
1619                 goto probe_free_gpio;
1620         }
1621
1622         host->base = ioremap(host->mem->start, resource_size(host->mem));
1623         if (!host->base) {
1624                 dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
1625                 ret = -EINVAL;
1626                 goto probe_free_mem_region;
1627         }
1628
1629         host->irq = platform_get_irq(pdev, 0);
1630         if (host->irq == 0) {
1631                 dev_err(&pdev->dev, "failed to get interrupt resource.\n");
1632                 ret = -EINVAL;
1633                 goto probe_iounmap;
1634         }
1635
1636         if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
1637                 dev_err(&pdev->dev, "failed to request mci interrupt.\n");
1638                 ret = -ENOENT;
1639                 goto probe_iounmap;
1640         }
1641
1642         /* We get spurious interrupts even when we have set the IMSK
1643          * register to ignore everything, so use disable_irq() to make
1644          * ensure we don't lock the system with un-serviceable requests. */
1645
1646         disable_irq(host->irq);
1647         host->irq_state = false;
1648
1649         if (!host->pdata->no_detect) {
1650                 ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
1651                 if (ret) {
1652                         dev_err(&pdev->dev, "failed to get detect gpio\n");
1653                         goto probe_free_irq;
1654                 }
1655
1656                 host->irq_cd = gpio_to_irq(host->pdata->gpio_detect);
1657
1658                 if (host->irq_cd >= 0) {
1659                         if (request_irq(host->irq_cd, s3cmci_irq_cd,
1660                                         IRQF_TRIGGER_RISING |
1661                                         IRQF_TRIGGER_FALLING,
1662                                         DRIVER_NAME, host)) {
1663                                 dev_err(&pdev->dev,
1664                                         "can't get card detect irq.\n");
1665                                 ret = -ENOENT;
1666                                 goto probe_free_gpio_cd;
1667                         }
1668                 } else {
1669                         dev_warn(&pdev->dev,
1670                                  "host detect has no irq available\n");
1671                         gpio_direction_input(host->pdata->gpio_detect);
1672                 }
1673         } else
1674                 host->irq_cd = -1;
1675
1676         if (!host->pdata->no_wprotect) {
1677                 ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
1678                 if (ret) {
1679                         dev_err(&pdev->dev, "failed to get writeprotect\n");
1680                         goto probe_free_irq_cd;
1681                 }
1682
1683                 gpio_direction_input(host->pdata->gpio_wprotect);
1684         }
1685
1686         /* depending on the dma state, get a dma channel to use. */
1687
1688         if (s3cmci_host_usedma(host)) {
1689                 dma_cap_mask_t mask;
1690
1691                 dma_cap_zero(mask);
1692                 dma_cap_set(DMA_SLAVE, mask);
1693
1694                 host->dma = dma_request_slave_channel_compat(mask,
1695                         s3c24xx_dma_filter, (void *)DMACH_SDI, &pdev->dev, "rx-tx");
1696                 if (!host->dma) {
1697                         dev_err(&pdev->dev, "cannot get DMA channel.\n");
1698                         ret = -EBUSY;
1699                         goto probe_free_gpio_wp;
1700                 }
1701         }
1702
1703         host->clk = clk_get(&pdev->dev, "sdi");
1704         if (IS_ERR(host->clk)) {
1705                 dev_err(&pdev->dev, "failed to find clock source.\n");
1706                 ret = PTR_ERR(host->clk);
1707                 host->clk = NULL;
1708                 goto probe_free_dma;
1709         }
1710
1711         ret = clk_prepare_enable(host->clk);
1712         if (ret) {
1713                 dev_err(&pdev->dev, "failed to enable clock source.\n");
1714                 goto clk_free;
1715         }
1716
1717         host->clk_rate = clk_get_rate(host->clk);
1718
1719         mmc->ops        = &s3cmci_ops;
1720         mmc->ocr_avail  = MMC_VDD_32_33 | MMC_VDD_33_34;
1721 #ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
1722         mmc->caps       = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
1723 #else
1724         mmc->caps       = MMC_CAP_4_BIT_DATA;
1725 #endif
1726         mmc->f_min      = host->clk_rate / (host->clk_div * 256);
1727         mmc->f_max      = host->clk_rate / host->clk_div;
1728
1729         if (host->pdata->ocr_avail)
1730                 mmc->ocr_avail = host->pdata->ocr_avail;
1731
1732         mmc->max_blk_count      = 4095;
1733         mmc->max_blk_size       = 4095;
1734         mmc->max_req_size       = 4095 * 512;
1735         mmc->max_seg_size       = mmc->max_req_size;
1736
1737         mmc->max_segs           = 128;
1738
1739         dbg(host, dbg_debug,
1740             "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n",
1741             (host->is2440?"2440":""),
1742             host->base, host->irq, host->irq_cd, host->dma);
1743
1744         ret = s3cmci_cpufreq_register(host);
1745         if (ret) {
1746                 dev_err(&pdev->dev, "failed to register cpufreq\n");
1747                 goto free_dmabuf;
1748         }
1749
1750         ret = mmc_add_host(mmc);
1751         if (ret) {
1752                 dev_err(&pdev->dev, "failed to add mmc host.\n");
1753                 goto free_cpufreq;
1754         }
1755
1756         s3cmci_debugfs_attach(host);
1757
1758         platform_set_drvdata(pdev, mmc);
1759         dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
1760                  s3cmci_host_usedma(host) ? "dma" : "pio",
1761                  mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
1762
1763         return 0;
1764
1765  free_cpufreq:
1766         s3cmci_cpufreq_deregister(host);
1767
1768  free_dmabuf:
1769         clk_disable_unprepare(host->clk);
1770
1771  clk_free:
1772         clk_put(host->clk);
1773
1774  probe_free_dma:
1775         if (s3cmci_host_usedma(host))
1776                 dma_release_channel(host->dma);
1777
1778  probe_free_gpio_wp:
1779         if (!host->pdata->no_wprotect)
1780                 gpio_free(host->pdata->gpio_wprotect);
1781
1782  probe_free_gpio_cd:
1783         if (!host->pdata->no_detect)
1784                 gpio_free(host->pdata->gpio_detect);
1785
1786  probe_free_irq_cd:
1787         if (host->irq_cd >= 0)
1788                 free_irq(host->irq_cd, host);
1789
1790  probe_free_irq:
1791         free_irq(host->irq, host);
1792
1793  probe_iounmap:
1794         iounmap(host->base);
1795
1796  probe_free_mem_region:
1797         release_mem_region(host->mem->start, resource_size(host->mem));
1798
1799  probe_free_gpio:
1800         for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1801                 gpio_free(i);
1802
1803  probe_free_host:
1804         mmc_free_host(mmc);
1805
1806  probe_out:
1807         return ret;
1808 }
1809
1810 static void s3cmci_shutdown(struct platform_device *pdev)
1811 {
1812         struct mmc_host *mmc = platform_get_drvdata(pdev);
1813         struct s3cmci_host *host = mmc_priv(mmc);
1814
1815         if (host->irq_cd >= 0)
1816                 free_irq(host->irq_cd, host);
1817
1818         s3cmci_debugfs_remove(host);
1819         s3cmci_cpufreq_deregister(host);
1820         mmc_remove_host(mmc);
1821         clk_disable_unprepare(host->clk);
1822 }
1823
1824 static int s3cmci_remove(struct platform_device *pdev)
1825 {
1826         struct mmc_host         *mmc  = platform_get_drvdata(pdev);
1827         struct s3cmci_host      *host = mmc_priv(mmc);
1828         struct s3c24xx_mci_pdata *pd = host->pdata;
1829         int i;
1830
1831         s3cmci_shutdown(pdev);
1832
1833         clk_put(host->clk);
1834
1835         tasklet_disable(&host->pio_tasklet);
1836
1837         if (s3cmci_host_usedma(host))
1838                 dma_release_channel(host->dma);
1839
1840         free_irq(host->irq, host);
1841
1842         if (!pd->no_wprotect)
1843                 gpio_free(pd->gpio_wprotect);
1844
1845         if (!pd->no_detect)
1846                 gpio_free(pd->gpio_detect);
1847
1848         for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1849                 gpio_free(i);
1850
1851
1852         iounmap(host->base);
1853         release_mem_region(host->mem->start, resource_size(host->mem));
1854
1855         mmc_free_host(mmc);
1856         return 0;
1857 }
1858
1859 static struct platform_device_id s3cmci_driver_ids[] = {
1860         {
1861                 .name   = "s3c2410-sdi",
1862                 .driver_data    = 0,
1863         }, {
1864                 .name   = "s3c2412-sdi",
1865                 .driver_data    = 1,
1866         }, {
1867                 .name   = "s3c2440-sdi",
1868                 .driver_data    = 1,
1869         },
1870         { }
1871 };
1872
1873 MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
1874
1875 static struct platform_driver s3cmci_driver = {
1876         .driver = {
1877                 .name   = "s3c-sdi",
1878         },
1879         .id_table       = s3cmci_driver_ids,
1880         .probe          = s3cmci_probe,
1881         .remove         = s3cmci_remove,
1882         .shutdown       = s3cmci_shutdown,
1883 };
1884
1885 module_platform_driver(s3cmci_driver);
1886
1887 MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
1888 MODULE_LICENSE("GPL v2");
1889 MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");