kernel/drivers/misc/ti-st/st_kim.c

   1 /*
   2  *  Shared Transport Line discipline driver Core
   3  *      Init Manager module responsible for GPIO control
   4  *      and firmware download
   5  *  Copyright (C) 2009-2010 Texas Instruments
   6  *  Author: Pavan Savoy <pavan_savoy@ti.com>
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License version 2 as
  10  *  published by the Free Software Foundation.
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  *
  21  */
  22
  23 #define pr_fmt(fmt) "(stk) :" fmt
  24 #include <linux/platform_device.h>
  25 #include <linux/jiffies.h>
  26 #include <linux/firmware.h>
  27 #include <linux/delay.h>
  28 #include <linux/wait.h>
  29 #include <linux/gpio.h>
  30 #include <linux/debugfs.h>
  31 #include <linux/seq_file.h>
  32 #include <linux/sched.h>
  33 #include <linux/sysfs.h>
  34 #include <linux/tty.h>
  35
  36 #include <linux/skbuff.h>
  37 #include <linux/ti_wilink_st.h>
  38 #include <linux/module.h>
  39 #include <linux/of.h>
  40 #include <linux/of_device.h>
  41
  42 #define MAX_ST_DEVICES  3       /* Imagine 1 on each UART for now */
  43 static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
  44
  45 /**********************************************************************/
  46 /* internal functions */
  47
  48 struct ti_st_plat_data  *dt_pdata;
  49 static struct ti_st_plat_data *get_platform_data(struct device *dev);
  50
  51 /**
  52  * st_get_plat_device -
  53  *      function which returns the reference to the platform device
  54  *      requested by id. As of now only 1 such device exists (id=0)
  55  *      the context requesting for reference can get the id to be
  56  *      requested by a. The protocol driver which is registering or
  57  *      b. the tty device which is opened.
  58  */
  59 static struct platform_device *st_get_plat_device(int id)
  60 {
  61         return st_kim_devices[id];
  62 }
  63
  64 /**
  65  * validate_firmware_response -
  66  *      function to return whether the firmware response was proper
  67  *      in case of error don't complete so that waiting for proper
  68  *      response times out
  69  */
  70 static void validate_firmware_response(struct kim_data_s *kim_gdata)
  71 {
  72         struct sk_buff *skb = kim_gdata->rx_skb;
  73         if (!skb)
  74                 return;
  75
  76         /* these magic numbers are the position in the response buffer which
  77          * allows us to distinguish whether the response is for the read
  78          * version info. command
  79          */
  80         if (skb->data[2] == 0x01 && skb->data[3] == 0x01 &&
  81                         skb->data[4] == 0x10 && skb->data[5] == 0x00) {
  82                 /* fw version response */
  83                 memcpy(kim_gdata->resp_buffer,
  84                                 kim_gdata->rx_skb->data,
  85                                 kim_gdata->rx_skb->len);
  86                 complete_all(&kim_gdata->kim_rcvd);
  87                 kim_gdata->rx_state = ST_W4_PACKET_TYPE;
  88                 kim_gdata->rx_skb = NULL;
  89                 kim_gdata->rx_count = 0;
  90         } else if (unlikely(skb->data[5] != 0)) {
  91                 pr_err("no proper response during fw download");
  92                 pr_err("data6 %x", skb->data[5]);
  93                 kfree_skb(skb);
  94                 return;         /* keep waiting for the proper response */
  95         }
  96         /* becos of all the script being downloaded */
  97         complete_all(&kim_gdata->kim_rcvd);
  98         kfree_skb(skb);
  99 }
 100
 101 /* check for data len received inside kim_int_recv
 102  * most often hit the last case to update state to waiting for data
 103  */
 104 static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
 105 {
 106         register int room = skb_tailroom(kim_gdata->rx_skb);
 107
 108         pr_debug("len %d room %d", len, room);
 109
 110         if (!len) {
 111                 validate_firmware_response(kim_gdata);
 112         } else if (len > room) {
 113                 /* Received packet's payload length is larger.
 114                  * We can't accommodate it in created skb.
 115                  */
 116                 pr_err("Data length is too large len %d room %d", len,
 117                            room);
 118                 kfree_skb(kim_gdata->rx_skb);
 119         } else {
 120                 /* Packet header has non-zero payload length and
 121                  * we have enough space in created skb. Lets read
 122                  * payload data */
 123                 kim_gdata->rx_state = ST_W4_DATA;
 124                 kim_gdata->rx_count = len;
 125                 return len;
 126         }
 127
 128         /* Change ST LL state to continue to process next
 129          * packet */
 130         kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 131         kim_gdata->rx_skb = NULL;
 132         kim_gdata->rx_count = 0;
 133
 134         return 0;
 135 }
 136
 137 /**
 138  * kim_int_recv - receive function called during firmware download
 139  *      firmware download responses on different UART drivers
 140  *      have been observed to come in bursts of different
 141  *      tty_receive and hence the logic
 142  */
 143 static void kim_int_recv(struct kim_data_s *kim_gdata,
 144         const unsigned char *data, long count)
 145 {
 146         const unsigned char *ptr;
 147         int len = 0, type = 0;
 148         unsigned char *plen;
 149
 150         pr_debug("%s", __func__);
 151         /* Decode received bytes here */
 152         ptr = data;
 153         if (unlikely(ptr == NULL)) {
 154                 pr_err(" received null from TTY ");
 155                 return;
 156         }
 157
 158         while (count) {
 159                 if (kim_gdata->rx_count) {
 160                         len = min_t(unsigned int, kim_gdata->rx_count, count);
 161                         memcpy(skb_put(kim_gdata->rx_skb, len), ptr, len);
 162                         kim_gdata->rx_count -= len;
 163                         count -= len;
 164                         ptr += len;
 165
 166                         if (kim_gdata->rx_count)
 167                                 continue;
 168
 169                         /* Check ST RX state machine , where are we? */
 170                         switch (kim_gdata->rx_state) {
 171                                 /* Waiting for complete packet ? */
 172                         case ST_W4_DATA:
 173                                 pr_debug("Complete pkt received");
 174                                 validate_firmware_response(kim_gdata);
 175                                 kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 176                                 kim_gdata->rx_skb = NULL;
 177                                 continue;
 178                                 /* Waiting for Bluetooth event header ? */
 179                         case ST_W4_HEADER:
 180                                 plen =
 181                                 (unsigned char *)&kim_gdata->rx_skb->data[1];
 182                                 pr_debug("event hdr: plen 0x%02x\n", *plen);
 183                                 kim_check_data_len(kim_gdata, *plen);
 184                                 continue;
 185                         }       /* end of switch */
 186                 }               /* end of if rx_state */
 187                 switch (*ptr) {
 188                         /* Bluetooth event packet? */
 189                 case 0x04:
 190                         kim_gdata->rx_state = ST_W4_HEADER;
 191                         kim_gdata->rx_count = 2;
 192                         type = *ptr;
 193                         break;
 194                 default:
 195                         pr_info("unknown packet");
 196                         ptr++;
 197                         count--;
 198                         continue;
 199                 }
 200                 ptr++;
 201                 count--;
 202                 kim_gdata->rx_skb =
 203                         alloc_skb(1024+8, GFP_ATOMIC);
 204                 if (!kim_gdata->rx_skb) {
 205                         pr_err("can't allocate mem for new packet");
 206                         kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 207                         kim_gdata->rx_count = 0;
 208                         return;
 209                 }
 210                 skb_reserve(kim_gdata->rx_skb, 8);
 211                 kim_gdata->rx_skb->cb[0] = 4;
 212                 kim_gdata->rx_skb->cb[1] = 0;
 213
 214         }
 215         return;
 216 }
 217
 218 static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 219 {
 220         unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
 221         const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
 222         long timeout;
 223
 224         pr_debug("%s", __func__);
 225
 226         reinit_completion(&kim_gdata->kim_rcvd);
 227         if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
 228                 pr_err("kim: couldn't write 4 bytes");
 229                 return -EIO;
 230         }
 231
 232         timeout = wait_for_completion_interruptible_timeout(
 233                 &kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME));
 234         if (timeout <= 0) {
 235                 pr_err(" waiting for ver info- timed out or received signal");
 236                 return timeout ? -ERESTARTSYS : -ETIMEDOUT;
 237         }
 238         reinit_completion(&kim_gdata->kim_rcvd);
 239         /* the positions 12 & 13 in the response buffer provide with the
 240          * chip, major & minor numbers
 241          */
 242
 243         version =
 244                 MAKEWORD(kim_gdata->resp_buffer[12],
 245                                 kim_gdata->resp_buffer[13]);
 246         chip = (version & 0x7C00) >> 10;
 247         min_ver = (version & 0x007F);
 248         maj_ver = (version & 0x0380) >> 7;
 249
 250         if (version & 0x8000)
 251                 maj_ver |= 0x0008;
 252
 253         sprintf(bts_scr_name, "ti-connectivity/TIInit_%d.%d.%d.bts",
 254                 chip, maj_ver, min_ver);
 255
 256         /* to be accessed later via sysfs entry */
 257         kim_gdata->version.full = version;
 258         kim_gdata->version.chip = chip;
 259         kim_gdata->version.maj_ver = maj_ver;
 260         kim_gdata->version.min_ver = min_ver;
 261
 262         pr_info("%s", bts_scr_name);
 263         return 0;
 264 }
 265
 266 static void skip_change_remote_baud(unsigned char **ptr, long *len)
 267 {
 268         unsigned char *nxt_action, *cur_action;
 269         cur_action = *ptr;
 270
 271         nxt_action = cur_action + sizeof(struct bts_action) +
 272                 ((struct bts_action *) cur_action)->size;
 273
 274         if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) {
 275                 pr_err("invalid action after change remote baud command");
 276         } else {
 277                 *ptr = *ptr + sizeof(struct bts_action) +
 278                         ((struct bts_action *)cur_action)->size;
 279                 *len = *len - (sizeof(struct bts_action) +
 280                                 ((struct bts_action *)cur_action)->size);
 281                 /* warn user on not commenting these in firmware */
 282                 pr_warn("skipping the wait event of change remote baud");
 283         }
 284 }
 285
 286 /**
 287  * download_firmware -
 288  *      internal function which parses through the .bts firmware
 289  *      script file intreprets SEND, DELAY actions only as of now
 290  */
 291 static long download_firmware(struct kim_data_s *kim_gdata)
 292 {
 293         long err = 0;
 294         long len = 0;
 295         unsigned char *ptr = NULL;
 296         unsigned char *action_ptr = NULL;
 297         unsigned char bts_scr_name[40] = { 0 }; /* 40 char long bts scr name? */
 298         int wr_room_space;
 299         int cmd_size;
 300         unsigned long timeout;
 301
 302         err = read_local_version(kim_gdata, bts_scr_name);
 303         if (err != 0) {
 304                 pr_err("kim: failed to read local ver");
 305                 return err;
 306         }
 307         err =
 308             request_firmware(&kim_gdata->fw_entry, bts_scr_name,
 309                              &kim_gdata->kim_pdev->dev);
 310         if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
 311                      (kim_gdata->fw_entry->size == 0))) {
 312                 pr_err(" request_firmware failed(errno %ld) for %s", err,
 313                            bts_scr_name);
 314                 return -EINVAL;
 315         }
 316         ptr = (void *)kim_gdata->fw_entry->data;
 317         len = kim_gdata->fw_entry->size;
 318         /* bts_header to remove out magic number and
 319          * version
 320          */
 321         ptr += sizeof(struct bts_header);
 322         len -= sizeof(struct bts_header);
 323
 324         while (len > 0 && ptr) {
 325                 pr_debug(" action size %d, type %d ",
 326                            ((struct bts_action *)ptr)->size,
 327                            ((struct bts_action *)ptr)->type);
 328
 329                 switch (((struct bts_action *)ptr)->type) {
 330                 case ACTION_SEND_COMMAND:       /* action send */
 331                         pr_debug("S");
 332                         action_ptr = &(((struct bts_action *)ptr)->data[0]);
 333                         if (unlikely
 334                             (((struct hci_command *)action_ptr)->opcode ==
 335                              0xFF36)) {
 336                                 /* ignore remote change
 337                                  * baud rate HCI VS command */
 338                                 pr_warn("change remote baud"
 339                                     " rate command in firmware");
 340                                 skip_change_remote_baud(&ptr, &len);
 341                                 break;
 342                         }
 343                         /*
 344                          * Make sure we have enough free space in uart
 345                          * tx buffer to write current firmware command
 346                          */
 347                         cmd_size = ((struct bts_action *)ptr)->size;
 348                         timeout = jiffies + msecs_to_jiffies(CMD_WR_TIME);
 349                         do {
 350                                 wr_room_space =
 351                                         st_get_uart_wr_room(kim_gdata->core_data);
 352                                 if (wr_room_space < 0) {
 353                                         pr_err("Unable to get free "
 354                                                         "space info from uart tx buffer");
 355                                         release_firmware(kim_gdata->fw_entry);
 356                                         return wr_room_space;
 357                                 }
 358                                 mdelay(1); /* wait 1ms before checking room */
 359                         } while ((wr_room_space < cmd_size) &&
 360                                         time_before(jiffies, timeout));
 361
 362                         /* Timeout happened ? */
 363                         if (time_after_eq(jiffies, timeout)) {
 364                                 pr_err("Timeout while waiting for free "
 365                                                 "free space in uart tx buffer");
 366                                 release_firmware(kim_gdata->fw_entry);
 367                                 return -ETIMEDOUT;
 368                         }
 369                         /* reinit completion before sending for the
 370                          * relevant wait
 371                          */
 372                         reinit_completion(&kim_gdata->kim_rcvd);
 373
 374                         /*
 375                          * Free space found in uart buffer, call st_int_write
 376                          * to send current firmware command to the uart tx
 377                          * buffer.
 378                          */
 379                         err = st_int_write(kim_gdata->core_data,
 380                         ((struct bts_action_send *)action_ptr)->data,
 381                                            ((struct bts_action *)ptr)->size);
 382                         if (unlikely(err < 0)) {
 383                                 release_firmware(kim_gdata->fw_entry);
 384                                 return err;
 385                         }
 386                         /*
 387                          * Check number of bytes written to the uart tx buffer
 388                          * and requested command write size
 389                          */
 390                         if (err != cmd_size) {
 391                                 pr_err("Number of bytes written to uart "
 392                                                 "tx buffer are not matching with "
 393                                                 "requested cmd write size");
 394                                 release_firmware(kim_gdata->fw_entry);
 395                                 return -EIO;
 396                         }
 397                         break;
 398                 case ACTION_WAIT_EVENT:  /* wait */
 399                         pr_debug("W");
 400                         err = wait_for_completion_interruptible_timeout(
 401                                         &kim_gdata->kim_rcvd,
 402                                         msecs_to_jiffies(CMD_RESP_TIME));
 403                         if (err <= 0) {
 404                                 pr_err("response timeout/signaled during fw download ");
 405                                 /* timed out */
 406                                 release_firmware(kim_gdata->fw_entry);
 407                                 return err ? -ERESTARTSYS : -ETIMEDOUT;
 408                         }
 409                         reinit_completion(&kim_gdata->kim_rcvd);
 410                         break;
 411                 case ACTION_DELAY:      /* sleep */
 412                         pr_info("sleep command in scr");
 413                         action_ptr = &(((struct bts_action *)ptr)->data[0]);
 414                         mdelay(((struct bts_action_delay *)action_ptr)->msec);
 415                         break;
 416                 }
 417                 len =
 418                     len - (sizeof(struct bts_action) +
 419                            ((struct bts_action *)ptr)->size);
 420                 ptr =
 421                     ptr + sizeof(struct bts_action) +
 422                     ((struct bts_action *)ptr)->size;
 423         }
 424         /* fw download complete */
 425         release_firmware(kim_gdata->fw_entry);
 426         return 0;
 427 }
 428
 429 /**********************************************************************/
 430 /* functions called from ST core */
 431 /* called from ST Core, when REG_IN_PROGRESS (registration in progress)
 432  * can be because of
 433  * 1. response to read local version
 434  * 2. during send/recv's of firmware download
 435  */
 436 void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 437 {
 438         struct st_data_s        *st_gdata = (struct st_data_s *)disc_data;
 439         struct kim_data_s       *kim_gdata = st_gdata->kim_data;
 440
 441         /* proceed to gather all data and distinguish read fw version response
 442          * from other fw responses when data gathering is complete
 443          */
 444         kim_int_recv(kim_gdata, data, count);
 445         return;
 446 }
 447
 448 /* to signal completion of line discipline installation
 449  * called from ST Core, upon tty_open
 450  */
 451 void st_kim_complete(void *kim_data)
 452 {
 453         struct kim_data_s       *kim_gdata = (struct kim_data_s *)kim_data;
 454         complete(&kim_gdata->ldisc_installed);
 455 }
 456
 457 /**
 458  * st_kim_start - called from ST Core upon 1st registration
 459  *      This involves toggling the chip enable gpio, reading
 460  *      the firmware version from chip, forming the fw file name
 461  *      based on the chip version, requesting the fw, parsing it
 462  *      and perform download(send/recv).
 463  */
 464 long st_kim_start(void *kim_data)
 465 {
 466         long err = 0;
 467         long retry = POR_RETRY_COUNT;
 468         struct ti_st_plat_data  *pdata;
 469         struct kim_data_s       *kim_gdata = (struct kim_data_s *)kim_data;
 470
 471         pr_info(" %s", __func__);
 472         if (kim_gdata->kim_pdev->dev.of_node) {
 473                 pr_debug("use device tree data");
 474                 pdata = dt_pdata;
 475         } else {
 476                 pdata = kim_gdata->kim_pdev->dev.platform_data;
 477         }
 478
 479         do {
 480                 /* platform specific enabling code here */
 481                 if (pdata->chip_enable)
 482                         pdata->chip_enable(kim_gdata);
 483
 484                 /* Configure BT nShutdown to HIGH state */
 485                 gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 486                 mdelay(5);      /* FIXME: a proper toggle */
 487                 gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
 488                 mdelay(100);
 489                 /* re-initialize the completion */
 490                 reinit_completion(&kim_gdata->ldisc_installed);
 491                 /* send notification to UIM */
 492                 kim_gdata->ldisc_install = 1;
 493                 pr_info("ldisc_install = 1");
 494                 sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
 495                                 NULL, "install");
 496                 /* wait for ldisc to be installed */
 497                 err = wait_for_completion_interruptible_timeout(
 498                         &kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
 499                 if (!err) {
 500                         /* ldisc installation timeout,
 501                          * flush uart, power cycle BT_EN */
 502                         pr_err("ldisc installation timeout");
 503                         err = st_kim_stop(kim_gdata);
 504                         continue;
 505                 } else {
 506                         /* ldisc installed now */
 507                         pr_info("line discipline installed");
 508                         err = download_firmware(kim_gdata);
 509                         if (err != 0) {
 510                                 /* ldisc installed but fw download failed,
 511                                  * flush uart & power cycle BT_EN */
 512                                 pr_err("download firmware failed");
 513                                 err = st_kim_stop(kim_gdata);
 514                                 continue;
 515                         } else {        /* on success don't retry */
 516                                 break;
 517                         }
 518                 }
 519         } while (retry--);
 520         return err;
 521 }
 522
 523 /**
 524  * st_kim_stop - stop communication with chip.
 525  *      This can be called from ST Core/KIM, on the-
 526  *      (a) last un-register when chip need not be powered there-after,
 527  *      (b) upon failure to either install ldisc or download firmware.
 528  *      The function is responsible to (a) notify UIM about un-installation,
 529  *      (b) flush UART if the ldisc was installed.
 530  *      (c) reset BT_EN - pull down nshutdown at the end.
 531  *      (d) invoke platform's chip disabling routine.
 532  */
 533 long st_kim_stop(void *kim_data)
 534 {
 535         long err = 0;
 536         struct kim_data_s       *kim_gdata = (struct kim_data_s *)kim_data;
 537         struct ti_st_plat_data  *pdata;
 538         struct tty_struct       *tty = kim_gdata->core_data->tty;
 539
 540         reinit_completion(&kim_gdata->ldisc_installed);
 541
 542         if (kim_gdata->kim_pdev->dev.of_node) {
 543                 pr_debug("use device tree data");
 544                 pdata = dt_pdata;
 545         } else
 546                 pdata = kim_gdata->kim_pdev->dev.platform_data;
 547
 548
 549         if (tty) {      /* can be called before ldisc is installed */
 550                 /* Flush any pending characters in the driver and discipline. */
 551                 tty_ldisc_flush(tty);
 552                 tty_driver_flush_buffer(tty);
 553         }
 554
 555         /* send uninstall notification to UIM */
 556         pr_info("ldisc_install = 0");
 557         kim_gdata->ldisc_install = 0;
 558         sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
 559
 560         /* wait for ldisc to be un-installed */
 561         err = wait_for_completion_interruptible_timeout(
 562                 &kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
 563         if (!err) {             /* timeout */
 564                 pr_err(" timed out waiting for ldisc to be un-installed");
 565                 err = -ETIMEDOUT;
 566         }
 567
 568         /* By default configure BT nShutdown to LOW state */
 569         gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 570         mdelay(1);
 571         gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
 572         mdelay(1);
 573         gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 574
 575         /* platform specific disable */
 576         if (pdata->chip_disable)
 577                 pdata->chip_disable(kim_gdata);
 578         return err;
 579 }
 580
 581 /**********************************************************************/
 582 /* functions called from subsystems */
 583 /* called when debugfs entry is read from */
 584
 585 static int show_version(struct seq_file *s, void *unused)
 586 {
 587         struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
 588         seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
 589                         kim_gdata->version.chip, kim_gdata->version.maj_ver,
 590                         kim_gdata->version.min_ver);
 591         return 0;
 592 }
 593
 594 static int show_list(struct seq_file *s, void *unused)
 595 {
 596         struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
 597         kim_st_list_protocols(kim_gdata->core_data, s);
 598         return 0;
 599 }
 600
 601 static ssize_t show_install(struct device *dev,
 602                 struct device_attribute *attr, char *buf)
 603 {
 604         struct kim_data_s *kim_data = dev_get_drvdata(dev);
 605         return sprintf(buf, "%d\n", kim_data->ldisc_install);
 606 }
 607
 608 #ifdef DEBUG
 609 static ssize_t store_dev_name(struct device *dev,
 610                 struct device_attribute *attr, const char *buf, size_t count)
 611 {
 612         struct kim_data_s *kim_data = dev_get_drvdata(dev);
 613         pr_debug("storing dev name >%s<", buf);
 614         strncpy(kim_data->dev_name, buf, count);
 615         pr_debug("stored dev name >%s<", kim_data->dev_name);
 616         return count;
 617 }
 618
 619 static ssize_t store_baud_rate(struct device *dev,
 620                 struct device_attribute *attr, const char *buf, size_t count)
 621 {
 622         struct kim_data_s *kim_data = dev_get_drvdata(dev);
 623         pr_debug("storing baud rate >%s<", buf);
 624         sscanf(buf, "%ld", &kim_data->baud_rate);
 625         pr_debug("stored baud rate >%ld<", kim_data->baud_rate);
 626         return count;
 627 }
 628 #endif  /* if DEBUG */
 629
 630 static ssize_t show_dev_name(struct device *dev,
 631                 struct device_attribute *attr, char *buf)
 632 {
 633         struct kim_data_s *kim_data = dev_get_drvdata(dev);
 634         return sprintf(buf, "%s\n", kim_data->dev_name);
 635 }
 636
 637 static ssize_t show_baud_rate(struct device *dev,
 638                 struct device_attribute *attr, char *buf)
 639 {
 640         struct kim_data_s *kim_data = dev_get_drvdata(dev);
 641         return sprintf(buf, "%d\n", kim_data->baud_rate);
 642 }
 643
 644 static ssize_t show_flow_cntrl(struct device *dev,
 645                 struct device_attribute *attr, char *buf)
 646 {
 647         struct kim_data_s *kim_data = dev_get_drvdata(dev);
 648         return sprintf(buf, "%d\n", kim_data->flow_cntrl);
 649 }
 650
 651 /* structures specific for sysfs entries */
 652 static struct kobj_attribute ldisc_install =
 653 __ATTR(install, 0444, (void *)show_install, NULL);
 654
 655 static struct kobj_attribute uart_dev_name =
 656 #ifdef DEBUG    /* TODO: move this to debug-fs if possible */
 657 __ATTR(dev_name, 0644, (void *)show_dev_name, (void *)store_dev_name);
 658 #else
 659 __ATTR(dev_name, 0444, (void *)show_dev_name, NULL);
 660 #endif
 661
 662 static struct kobj_attribute uart_baud_rate =
 663 #ifdef DEBUG    /* TODO: move to debugfs */
 664 __ATTR(baud_rate, 0644, (void *)show_baud_rate, (void *)store_baud_rate);
 665 #else
 666 __ATTR(baud_rate, 0444, (void *)show_baud_rate, NULL);
 667 #endif
 668
 669 static struct kobj_attribute uart_flow_cntrl =
 670 __ATTR(flow_cntrl, 0444, (void *)show_flow_cntrl, NULL);
 671
 672 static struct attribute *uim_attrs[] = {
 673         &ldisc_install.attr,
 674         &uart_dev_name.attr,
 675         &uart_baud_rate.attr,
 676         &uart_flow_cntrl.attr,
 677         NULL,
 678 };
 679
 680 static struct attribute_group uim_attr_grp = {
 681         .attrs = uim_attrs,
 682 };
 683
 684 /**
 685  * st_kim_ref - reference the core's data
 686  *      This references the per-ST platform device in the arch/xx/
 687  *      board-xx.c file.
 688  *      This would enable multiple such platform devices to exist
 689  *      on a given platform
 690  */
 691 void st_kim_ref(struct st_data_s **core_data, int id)
 692 {
 693         struct platform_device  *pdev;
 694         struct kim_data_s       *kim_gdata;
 695         /* get kim_gdata reference from platform device */
 696         pdev = st_get_plat_device(id);
 697         if (!pdev)
 698                 goto err;
 699         kim_gdata = platform_get_drvdata(pdev);
 700         if (!kim_gdata)
 701                 goto err;
 702
 703         *core_data = kim_gdata->core_data;
 704         return;
 705 err:
 706         *core_data = NULL;
 707 }
 708
 709 static int kim_version_open(struct inode *i, struct file *f)
 710 {
 711         return single_open(f, show_version, i->i_private);
 712 }
 713
 714 static int kim_list_open(struct inode *i, struct file *f)
 715 {
 716         return single_open(f, show_list, i->i_private);
 717 }
 718
 719 static const struct file_operations version_debugfs_fops = {
 720         /* version info */
 721         .open = kim_version_open,
 722         .read = seq_read,
 723         .llseek = seq_lseek,
 724         .release = single_release,
 725 };
 726 static const struct file_operations list_debugfs_fops = {
 727         /* protocols info */
 728         .open = kim_list_open,
 729         .read = seq_read,
 730         .llseek = seq_lseek,
 731         .release = single_release,
 732 };
 733
 734 /**********************************************************************/
 735 /* functions called from platform device driver subsystem
 736  * need to have a relevant platform device entry in the platform's
 737  * board-*.c file
 738  */
 739
 740 static const struct of_device_id kim_of_match[] = {
 741 {
 742         .compatible = "kim",
 743         },
 744         {}
 745 };
 746 MODULE_DEVICE_TABLE(of, kim_of_match);
 747
 748 static struct ti_st_plat_data *get_platform_data(struct device *dev)
 749 {
 750         struct device_node *np = dev->of_node;
 751         const u32 *dt_property;
 752         int len;
 753
 754         dt_pdata = kzalloc(sizeof(*dt_pdata), GFP_KERNEL);
 755
 756         if (!dt_pdata)
 757                 pr_err("Can't allocate device_tree platform data\n");
 758
 759         dt_property = of_get_property(np, "dev_name", &len);
 760         if (dt_property)
 761                 memcpy(&dt_pdata->dev_name, dt_property, len);
 762         of_property_read_u32(np, "nshutdown_gpio",
 763                              &dt_pdata->nshutdown_gpio);
 764         of_property_read_u32(np, "flow_cntrl", &dt_pdata->flow_cntrl);
 765         of_property_read_u32(np, "baud_rate", &dt_pdata->baud_rate);
 766
 767         return dt_pdata;
 768 }
 769
 770 static struct dentry *kim_debugfs_dir;
 771 static int kim_probe(struct platform_device *pdev)
 772 {
 773         struct kim_data_s       *kim_gdata;
 774         struct ti_st_plat_data  *pdata;
 775         int err;
 776
 777         if (pdev->dev.of_node)
 778                 pdata = get_platform_data(&pdev->dev);
 779         else
 780                 pdata = pdev->dev.platform_data;
 781
 782         if (pdata == NULL) {
 783                 dev_err(&pdev->dev, "Platform Data is missing\n");
 784                 return -ENXIO;
 785         }
 786
 787         if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
 788                 /* multiple devices could exist */
 789                 st_kim_devices[pdev->id] = pdev;
 790         } else {
 791                 /* platform's sure about existence of 1 device */
 792                 st_kim_devices[0] = pdev;
 793         }
 794
 795         kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
 796         if (!kim_gdata) {
 797                 pr_err("no mem to allocate");
 798                 return -ENOMEM;
 799         }
 800         platform_set_drvdata(pdev, kim_gdata);
 801
 802         err = st_core_init(&kim_gdata->core_data);
 803         if (err != 0) {
 804                 pr_err(" ST core init failed");
 805                 err = -EIO;
 806                 goto err_core_init;
 807         }
 808         /* refer to itself */
 809         kim_gdata->core_data->kim_data = kim_gdata;
 810
 811         /* Claim the chip enable nShutdown gpio from the system */
 812         kim_gdata->nshutdown = pdata->nshutdown_gpio;
 813         err = gpio_request(kim_gdata->nshutdown, "kim");
 814         if (unlikely(err)) {
 815                 pr_err(" gpio %d request failed ", kim_gdata->nshutdown);
 816                 return err;
 817         }
 818
 819         /* Configure nShutdown GPIO as output=0 */
 820         err = gpio_direction_output(kim_gdata->nshutdown, 0);
 821         if (unlikely(err)) {
 822                 pr_err(" unable to configure gpio %d", kim_gdata->nshutdown);
 823                 return err;
 824         }
 825         /* get reference of pdev for request_firmware
 826          */
 827         kim_gdata->kim_pdev = pdev;
 828         init_completion(&kim_gdata->kim_rcvd);
 829         init_completion(&kim_gdata->ldisc_installed);
 830
 831         err = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
 832         if (err) {
 833                 pr_err("failed to create sysfs entries");
 834                 goto err_sysfs_group;
 835         }
 836
 837         /* copying platform data */
 838         strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN);
 839         kim_gdata->flow_cntrl = pdata->flow_cntrl;
 840         kim_gdata->baud_rate = pdata->baud_rate;
 841         pr_info("sysfs entries created\n");
 842
 843         kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
 844         if (!kim_debugfs_dir) {
 845                 pr_err(" debugfs entries creation failed ");
 846                 return 0;
 847         }
 848
 849         debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
 850                                 kim_gdata, &version_debugfs_fops);
 851         debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
 852                                 kim_gdata, &list_debugfs_fops);
 853         return 0;
 854
 855 err_sysfs_group:
 856         st_core_exit(kim_gdata->core_data);
 857
 858 err_core_init:
 859         kfree(kim_gdata);
 860
 861         return err;
 862 }
 863
 864 static int kim_remove(struct platform_device *pdev)
 865 {
 866         /* free the GPIOs requested */
 867         struct ti_st_plat_data  *pdata;
 868         struct kim_data_s       *kim_gdata;
 869
 870         if (pdev->dev.of_node) {
 871                 pr_debug("use device tree data");
 872                 pdata = dt_pdata;
 873         } else {
 874                 pdata = pdev->dev.platform_data;
 875         }
 876
 877         kim_gdata = platform_get_drvdata(pdev);
 878
 879         /* Free the Bluetooth/FM/GPIO
 880          * nShutdown gpio from the system
 881          */
 882         gpio_free(pdata->nshutdown_gpio);
 883         pr_info("nshutdown GPIO Freed");
 884
 885         debugfs_remove_recursive(kim_debugfs_dir);
 886         sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
 887         pr_info("sysfs entries removed");
 888
 889         kim_gdata->kim_pdev = NULL;
 890         st_core_exit(kim_gdata->core_data);
 891
 892         kfree(kim_gdata);
 893         kim_gdata = NULL;
 894         kfree(dt_pdata);
 895         dt_pdata = NULL;
 896
 897         return 0;
 898 }
 899
 900 static int kim_suspend(struct platform_device *pdev, pm_message_t state)
 901 {
 902         struct ti_st_plat_data  *pdata;
 903
 904         if (pdev->dev.of_node) {
 905                 pr_debug("use device tree data");
 906                 pdata = dt_pdata;
 907         } else {
 908                 pdata = pdev->dev.platform_data;
 909         }
 910
 911         if (pdata->suspend)
 912                 return pdata->suspend(pdev, state);
 913
 914         return 0;
 915 }
 916
 917 static int kim_resume(struct platform_device *pdev)
 918 {
 919         struct ti_st_plat_data  *pdata;
 920
 921         if (pdev->dev.of_node) {
 922                 pr_debug("use device tree data");
 923                 pdata = dt_pdata;
 924         } else {
 925                 pdata = pdev->dev.platform_data;
 926         }
 927
 928         if (pdata->resume)
 929                 return pdata->resume(pdev);
 930
 931         return 0;
 932 }
 933
 934 /**********************************************************************/
 935 /* entry point for ST KIM module, called in from ST Core */
 936 static struct platform_driver kim_platform_driver = {
 937         .probe = kim_probe,
 938         .remove = kim_remove,
 939         .suspend = kim_suspend,
 940         .resume = kim_resume,
 941         .driver = {
 942                 .name = "kim",
 943                 .owner = THIS_MODULE,
 944                 .of_match_table = of_match_ptr(kim_of_match),
 945         },
 946 };
 947
 948 module_platform_driver(kim_platform_driver);
 949
 950 MODULE_AUTHOR("Pavan Savoy <pavan_savoy@ti.com>");
 951 MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips ");
 952 MODULE_LICENSE("GPL");