Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / mfd / max8997-irq.c
1 /*
2  * max8997-irq.c - Interrupt controller support for MAX8997
3  *
4  * Copyright (C) 2011 Samsung Electronics Co.Ltd
5  * MyungJoo Ham <myungjoo.ham@samsung.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
20  *
21  * This driver is based on max8998-irq.c
22  */
23
24 #include <linux/err.h>
25 #include <linux/irq.h>
26 #include <linux/interrupt.h>
27 #include <linux/mfd/max8997.h>
28 #include <linux/mfd/max8997-private.h>
29
30 static const u8 max8997_mask_reg[] = {
31         [PMIC_INT1] = MAX8997_REG_INT1MSK,
32         [PMIC_INT2] = MAX8997_REG_INT2MSK,
33         [PMIC_INT3] = MAX8997_REG_INT3MSK,
34         [PMIC_INT4] = MAX8997_REG_INT4MSK,
35         [FUEL_GAUGE] = MAX8997_REG_INVALID,
36         [MUIC_INT1] = MAX8997_MUIC_REG_INTMASK1,
37         [MUIC_INT2] = MAX8997_MUIC_REG_INTMASK2,
38         [MUIC_INT3] = MAX8997_MUIC_REG_INTMASK3,
39         [GPIO_LOW] = MAX8997_REG_INVALID,
40         [GPIO_HI] = MAX8997_REG_INVALID,
41         [FLASH_STATUS] = MAX8997_REG_INVALID,
42 };
43
44 static struct i2c_client *get_i2c(struct max8997_dev *max8997,
45                                 enum max8997_irq_source src)
46 {
47         switch (src) {
48         case PMIC_INT1 ... PMIC_INT4:
49                 return max8997->i2c;
50         case FUEL_GAUGE:
51                 return NULL;
52         case MUIC_INT1 ... MUIC_INT3:
53                 return max8997->muic;
54         case GPIO_LOW ... GPIO_HI:
55                 return max8997->i2c;
56         case FLASH_STATUS:
57                 return max8997->i2c;
58         default:
59                 return ERR_PTR(-EINVAL);
60         }
61 }
62
63 struct max8997_irq_data {
64         int mask;
65         enum max8997_irq_source group;
66 };
67
68 #define DECLARE_IRQ(idx, _group, _mask)         \
69         [(idx)] = { .group = (_group), .mask = (_mask) }
70 static const struct max8997_irq_data max8997_irqs[] = {
71         DECLARE_IRQ(MAX8997_PMICIRQ_PWRONR,     PMIC_INT1, 1 << 0),
72         DECLARE_IRQ(MAX8997_PMICIRQ_PWRONF,     PMIC_INT1, 1 << 1),
73         DECLARE_IRQ(MAX8997_PMICIRQ_PWRON1SEC,  PMIC_INT1, 1 << 3),
74         DECLARE_IRQ(MAX8997_PMICIRQ_JIGONR,     PMIC_INT1, 1 << 4),
75         DECLARE_IRQ(MAX8997_PMICIRQ_JIGONF,     PMIC_INT1, 1 << 5),
76         DECLARE_IRQ(MAX8997_PMICIRQ_LOWBAT2,    PMIC_INT1, 1 << 6),
77         DECLARE_IRQ(MAX8997_PMICIRQ_LOWBAT1,    PMIC_INT1, 1 << 7),
78
79         DECLARE_IRQ(MAX8997_PMICIRQ_JIGR,       PMIC_INT2, 1 << 0),
80         DECLARE_IRQ(MAX8997_PMICIRQ_JIGF,       PMIC_INT2, 1 << 1),
81         DECLARE_IRQ(MAX8997_PMICIRQ_MR,         PMIC_INT2, 1 << 2),
82         DECLARE_IRQ(MAX8997_PMICIRQ_DVS1OK,     PMIC_INT2, 1 << 3),
83         DECLARE_IRQ(MAX8997_PMICIRQ_DVS2OK,     PMIC_INT2, 1 << 4),
84         DECLARE_IRQ(MAX8997_PMICIRQ_DVS3OK,     PMIC_INT2, 1 << 5),
85         DECLARE_IRQ(MAX8997_PMICIRQ_DVS4OK,     PMIC_INT2, 1 << 6),
86
87         DECLARE_IRQ(MAX8997_PMICIRQ_CHGINS,     PMIC_INT3, 1 << 0),
88         DECLARE_IRQ(MAX8997_PMICIRQ_CHGRM,      PMIC_INT3, 1 << 1),
89         DECLARE_IRQ(MAX8997_PMICIRQ_DCINOVP,    PMIC_INT3, 1 << 2),
90         DECLARE_IRQ(MAX8997_PMICIRQ_TOPOFFR,    PMIC_INT3, 1 << 3),
91         DECLARE_IRQ(MAX8997_PMICIRQ_CHGRSTF,    PMIC_INT3, 1 << 5),
92         DECLARE_IRQ(MAX8997_PMICIRQ_MBCHGTMEXPD,        PMIC_INT3, 1 << 7),
93
94         DECLARE_IRQ(MAX8997_PMICIRQ_RTC60S,     PMIC_INT4, 1 << 0),
95         DECLARE_IRQ(MAX8997_PMICIRQ_RTCA1,      PMIC_INT4, 1 << 1),
96         DECLARE_IRQ(MAX8997_PMICIRQ_RTCA2,      PMIC_INT4, 1 << 2),
97         DECLARE_IRQ(MAX8997_PMICIRQ_SMPL_INT,   PMIC_INT4, 1 << 3),
98         DECLARE_IRQ(MAX8997_PMICIRQ_RTC1S,      PMIC_INT4, 1 << 4),
99         DECLARE_IRQ(MAX8997_PMICIRQ_WTSR,       PMIC_INT4, 1 << 5),
100
101         DECLARE_IRQ(MAX8997_MUICIRQ_ADCError,   MUIC_INT1, 1 << 2),
102         DECLARE_IRQ(MAX8997_MUICIRQ_ADCLow,     MUIC_INT1, 1 << 1),
103         DECLARE_IRQ(MAX8997_MUICIRQ_ADC,        MUIC_INT1, 1 << 0),
104
105         DECLARE_IRQ(MAX8997_MUICIRQ_VBVolt,     MUIC_INT2, 1 << 4),
106         DECLARE_IRQ(MAX8997_MUICIRQ_DBChg,      MUIC_INT2, 1 << 3),
107         DECLARE_IRQ(MAX8997_MUICIRQ_DCDTmr,     MUIC_INT2, 1 << 2),
108         DECLARE_IRQ(MAX8997_MUICIRQ_ChgDetRun,  MUIC_INT2, 1 << 1),
109         DECLARE_IRQ(MAX8997_MUICIRQ_ChgTyp,     MUIC_INT2, 1 << 0),
110
111         DECLARE_IRQ(MAX8997_MUICIRQ_OVP,        MUIC_INT3, 1 << 2),
112 };
113
114 static void max8997_irq_lock(struct irq_data *data)
115 {
116         struct max8997_dev *max8997 = irq_get_chip_data(data->irq);
117
118         mutex_lock(&max8997->irqlock);
119 }
120
121 static void max8997_irq_sync_unlock(struct irq_data *data)
122 {
123         struct max8997_dev *max8997 = irq_get_chip_data(data->irq);
124         int i;
125
126         for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
127                 u8 mask_reg = max8997_mask_reg[i];
128                 struct i2c_client *i2c = get_i2c(max8997, i);
129
130                 if (mask_reg == MAX8997_REG_INVALID ||
131                                 IS_ERR_OR_NULL(i2c))
132                         continue;
133                 max8997->irq_masks_cache[i] = max8997->irq_masks_cur[i];
134
135                 max8997_write_reg(i2c, max8997_mask_reg[i],
136                                 max8997->irq_masks_cur[i]);
137         }
138
139         mutex_unlock(&max8997->irqlock);
140 }
141
142 static const inline struct max8997_irq_data *
143 irq_to_max8997_irq(struct max8997_dev *max8997, int irq)
144 {
145         struct irq_data *data = irq_get_irq_data(irq);
146         return &max8997_irqs[data->hwirq];
147 }
148
149 static void max8997_irq_mask(struct irq_data *data)
150 {
151         struct max8997_dev *max8997 = irq_get_chip_data(data->irq);
152         const struct max8997_irq_data *irq_data = irq_to_max8997_irq(max8997,
153                                                                 data->irq);
154
155         max8997->irq_masks_cur[irq_data->group] |= irq_data->mask;
156 }
157
158 static void max8997_irq_unmask(struct irq_data *data)
159 {
160         struct max8997_dev *max8997 = irq_get_chip_data(data->irq);
161         const struct max8997_irq_data *irq_data = irq_to_max8997_irq(max8997,
162                                                                 data->irq);
163
164         max8997->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
165 }
166
167 static struct irq_chip max8997_irq_chip = {
168         .name                   = "max8997",
169         .irq_bus_lock           = max8997_irq_lock,
170         .irq_bus_sync_unlock    = max8997_irq_sync_unlock,
171         .irq_mask               = max8997_irq_mask,
172         .irq_unmask             = max8997_irq_unmask,
173 };
174
175 #define MAX8997_IRQSRC_PMIC             (1 << 1)
176 #define MAX8997_IRQSRC_FUELGAUGE        (1 << 2)
177 #define MAX8997_IRQSRC_MUIC             (1 << 3)
178 #define MAX8997_IRQSRC_GPIO             (1 << 4)
179 #define MAX8997_IRQSRC_FLASH            (1 << 5)
180 static irqreturn_t max8997_irq_thread(int irq, void *data)
181 {
182         struct max8997_dev *max8997 = data;
183         u8 irq_reg[MAX8997_IRQ_GROUP_NR] = {};
184         u8 irq_src;
185         int ret;
186         int i, cur_irq;
187
188         ret = max8997_read_reg(max8997->i2c, MAX8997_REG_INTSRC, &irq_src);
189         if (ret < 0) {
190                 dev_err(max8997->dev, "Failed to read interrupt source: %d\n",
191                                 ret);
192                 return IRQ_NONE;
193         }
194
195         if (irq_src & MAX8997_IRQSRC_PMIC) {
196                 /* PMIC INT1 ~ INT4 */
197                 max8997_bulk_read(max8997->i2c, MAX8997_REG_INT1, 4,
198                                 &irq_reg[PMIC_INT1]);
199         }
200         if (irq_src & MAX8997_IRQSRC_FUELGAUGE) {
201                 /*
202                  * TODO: FUEL GAUGE
203                  *
204                  * This is to be supported by Max17042 driver. When
205                  * an interrupt incurs here, it should be relayed to a
206                  * Max17042 device that is connected (probably by
207                  * platform-data). However, we do not have interrupt
208                  * handling in Max17042 driver currently. The Max17042 IRQ
209                  * driver should be ready to be used as a stand-alone device and
210                  * a Max8997-dependent device. Because it is not ready in
211                  * Max17042-side and it is not too critical in operating
212                  * Max8997, we do not implement this in initial releases.
213                  */
214                 irq_reg[FUEL_GAUGE] = 0;
215         }
216         if (irq_src & MAX8997_IRQSRC_MUIC) {
217                 /* MUIC INT1 ~ INT3 */
218                 max8997_bulk_read(max8997->muic, MAX8997_MUIC_REG_INT1, 3,
219                                 &irq_reg[MUIC_INT1]);
220         }
221         if (irq_src & MAX8997_IRQSRC_GPIO) {
222                 /* GPIO Interrupt */
223                 u8 gpio_info[MAX8997_NUM_GPIO];
224
225                 irq_reg[GPIO_LOW] = 0;
226                 irq_reg[GPIO_HI] = 0;
227
228                 max8997_bulk_read(max8997->i2c, MAX8997_REG_GPIOCNTL1,
229                                 MAX8997_NUM_GPIO, gpio_info);
230                 for (i = 0; i < MAX8997_NUM_GPIO; i++) {
231                         bool interrupt = false;
232
233                         switch (gpio_info[i] & MAX8997_GPIO_INT_MASK) {
234                         case MAX8997_GPIO_INT_BOTH:
235                                 if (max8997->gpio_status[i] != gpio_info[i])
236                                         interrupt = true;
237                                 break;
238                         case MAX8997_GPIO_INT_RISE:
239                                 if ((max8997->gpio_status[i] != gpio_info[i]) &&
240                                     (gpio_info[i] & MAX8997_GPIO_DATA_MASK))
241                                         interrupt = true;
242                                 break;
243                         case MAX8997_GPIO_INT_FALL:
244                                 if ((max8997->gpio_status[i] != gpio_info[i]) &&
245                                     !(gpio_info[i] & MAX8997_GPIO_DATA_MASK))
246                                         interrupt = true;
247                                 break;
248                         default:
249                                 break;
250                         }
251
252                         if (interrupt) {
253                                 if (i < 8)
254                                         irq_reg[GPIO_LOW] |= (1 << i);
255                                 else
256                                         irq_reg[GPIO_HI] |= (1 << (i - 8));
257                         }
258
259                 }
260         }
261         if (irq_src & MAX8997_IRQSRC_FLASH) {
262                 /* Flash Status Interrupt */
263                 ret = max8997_read_reg(max8997->i2c, MAX8997_REG_FLASHSTATUS,
264                                 &irq_reg[FLASH_STATUS]);
265         }
266
267         /* Apply masking */
268         for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++)
269                 irq_reg[i] &= ~max8997->irq_masks_cur[i];
270
271         /* Report */
272         for (i = 0; i < MAX8997_IRQ_NR; i++) {
273                 if (irq_reg[max8997_irqs[i].group] & max8997_irqs[i].mask) {
274                         cur_irq = irq_find_mapping(max8997->irq_domain, i);
275                         if (cur_irq)
276                                 handle_nested_irq(cur_irq);
277                 }
278         }
279
280         return IRQ_HANDLED;
281 }
282
283 int max8997_irq_resume(struct max8997_dev *max8997)
284 {
285         if (max8997->irq && max8997->irq_domain)
286                 max8997_irq_thread(0, max8997);
287         return 0;
288 }
289
290 static int max8997_irq_domain_map(struct irq_domain *d, unsigned int irq,
291                                         irq_hw_number_t hw)
292 {
293         struct max8997_dev *max8997 = d->host_data;
294
295         irq_set_chip_data(irq, max8997);
296         irq_set_chip_and_handler(irq, &max8997_irq_chip, handle_edge_irq);
297         irq_set_nested_thread(irq, 1);
298 #ifdef CONFIG_ARM
299         set_irq_flags(irq, IRQF_VALID);
300 #else
301         irq_set_noprobe(irq);
302 #endif
303         return 0;
304 }
305
306 static struct irq_domain_ops max8997_irq_domain_ops = {
307         .map = max8997_irq_domain_map,
308 };
309
310 int max8997_irq_init(struct max8997_dev *max8997)
311 {
312         struct irq_domain *domain;
313         int i;
314         int ret;
315         u8 val;
316
317         if (!max8997->irq) {
318                 dev_warn(max8997->dev, "No interrupt specified.\n");
319                 return 0;
320         }
321
322         mutex_init(&max8997->irqlock);
323
324         /* Mask individual interrupt sources */
325         for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
326                 struct i2c_client *i2c;
327
328                 max8997->irq_masks_cur[i] = 0xff;
329                 max8997->irq_masks_cache[i] = 0xff;
330                 i2c = get_i2c(max8997, i);
331
332                 if (IS_ERR_OR_NULL(i2c))
333                         continue;
334                 if (max8997_mask_reg[i] == MAX8997_REG_INVALID)
335                         continue;
336
337                 max8997_write_reg(i2c, max8997_mask_reg[i], 0xff);
338         }
339
340         for (i = 0; i < MAX8997_NUM_GPIO; i++) {
341                 max8997->gpio_status[i] = (max8997_read_reg(max8997->i2c,
342                                                 MAX8997_REG_GPIOCNTL1 + i,
343                                                 &val)
344                                         & MAX8997_GPIO_DATA_MASK) ?
345                                         true : false;
346         }
347
348         domain = irq_domain_add_linear(NULL, MAX8997_IRQ_NR,
349                                         &max8997_irq_domain_ops, max8997);
350         if (!domain) {
351                 dev_err(max8997->dev, "could not create irq domain\n");
352                 return -ENODEV;
353         }
354         max8997->irq_domain = domain;
355
356         ret = request_threaded_irq(max8997->irq, NULL, max8997_irq_thread,
357                         IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
358                         "max8997-irq", max8997);
359
360         if (ret) {
361                 dev_err(max8997->dev, "Failed to request IRQ %d: %d\n",
362                                 max8997->irq, ret);
363                 return ret;
364         }
365
366         if (!max8997->ono)
367                 return 0;
368
369         ret = request_threaded_irq(max8997->ono, NULL, max8997_irq_thread,
370                         IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
371                         IRQF_ONESHOT, "max8997-ono", max8997);
372
373         if (ret)
374                 dev_err(max8997->dev, "Failed to request ono-IRQ %d: %d\n",
375                                 max8997->ono, ret);
376
377         return 0;
378 }
379
380 void max8997_irq_exit(struct max8997_dev *max8997)
381 {
382         if (max8997->ono)
383                 free_irq(max8997->ono, max8997);
384
385         if (max8997->irq)
386                 free_irq(max8997->irq, max8997);
387 }