Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / usb / stk1160 / stk1160-reg.h
1 /*
2  * STK1160 driver
3  *
4  * Copyright (C) 2012 Ezequiel Garcia
5  * <elezegarcia--a.t--gmail.com>
6  *
7  * Based on Easycap driver by R.M. Thomas
8  *      Copyright (C) 2010 R.M. Thomas
9  *      <rmthomas--a.t--sciolus.org>
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  */
22
23 /* GPIO Control */
24 #define STK1160_GCTRL                   0x000
25
26 /* Remote Wakup Control */
27 #define STK1160_RMCTL                   0x00c
28
29 /*
30  * Decoder Control Register:
31  * This byte controls capture start/stop
32  * with bit #7 (0x?? OR 0x80 to activate).
33  */
34 #define STK1160_DCTRL                   0x100
35
36 /* Capture Frame Start Position */
37 #define STK116_CFSPO                    0x110
38 #define STK116_CFSPO_STX_L              0x110
39 #define STK116_CFSPO_STX_H              0x111
40 #define STK116_CFSPO_STY_L              0x112
41 #define STK116_CFSPO_STY_H              0x113
42
43 /* Capture Frame End Position */
44 #define STK116_CFEPO                    0x114
45 #define STK116_CFEPO_ENX_L              0x114
46 #define STK116_CFEPO_ENX_H              0x115
47 #define STK116_CFEPO_ENY_L              0x116
48 #define STK116_CFEPO_ENY_H              0x117
49
50 /* Serial Interface Control  */
51 #define STK1160_SICTL                   0x200
52 #define STK1160_SICTL_CD                0x202
53 #define STK1160_SICTL_SDA               0x203
54
55 /* Serial Bus Write */
56 #define STK1160_SBUSW                   0x204
57 #define STK1160_SBUSW_WA                0x204
58 #define STK1160_SBUSW_WD                0x205
59
60 /* Serial Bus Read */
61 #define STK1160_SBUSR                   0x208
62 #define STK1160_SBUSR_RA                0x208
63 #define STK1160_SBUSR_RD                0x209
64
65 /* Alternate Serial Inteface Control */
66 #define STK1160_ASIC                    0x2fc
67
68 /* PLL Select Options */
69 #define STK1160_PLLSO                   0x018
70
71 /* PLL Frequency Divider */
72 #define STK1160_PLLFD                   0x01c
73
74 /* Timing Generator */
75 #define STK1160_TIGEN                   0x300
76
77 /* Timing Control Parameter */
78 #define STK1160_TICTL                   0x350
79
80 /* AC97 Audio Control */
81 #define STK1160_AC97CTL_0               0x500
82 #define STK1160_AC97CTL_1               0x504
83
84 /* Use [0:6] bits of register 0x504 to set codec command address */
85 #define STK1160_AC97_ADDR               0x504
86 /* Use [16:31] bits of register 0x500 to set codec command data */
87 #define STK1160_AC97_CMD                0x502
88
89 /* Audio I2S Interface */
90 #define STK1160_I2SCTL                  0x50c
91
92 /* EEPROM Interface */
93 #define STK1160_EEPROM_SZ               0x5f0