kernel/drivers/media/usb/gspca/touptek.c

   1 /*
   2  * ToupTek UCMOS / AmScope MU series camera driver
   3  * TODO: contrast with ScopeTek / AmScope MDC cameras
   4  *
   5  * Copyright (C) 2012-2014 John McMaster <JohnDMcMaster@gmail.com>
   6  *
   7  * Special thanks to Bushing for helping with the decrypt algorithm and
   8  * Sean O'Sullivan / the Rensselaer Center for Open Source
   9  * Software (RCOS) for helping me learn kernel development
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  19  * GNU General Public License for more details.
  20  */
  21
  22 #include "gspca.h"
  23
  24 #define MODULE_NAME "touptek"
  25
  26 MODULE_AUTHOR("John McMaster");
  27 MODULE_DESCRIPTION("ToupTek UCMOS / Amscope MU microscope camera driver");
  28 MODULE_LICENSE("GPL");
  29
  30 /*
  31  * Exposure reg is linear with exposure time
  32  * Exposure (sec), E (reg)
  33  * 0.000400, 0x0002
  34  * 0.001000, 0x0005
  35  * 0.005000, 0x0019
  36  * 0.020000, 0x0064
  37  * 0.080000, 0x0190
  38  * 0.400000, 0x07D0
  39  * 1.000000, 0x1388
  40  * 2.000000, 0x2710
  41  *
  42  * Three gain stages
  43  * 0x1000: master channel enable bit
  44  * 0x007F: low gain bits
  45  * 0x0080: medium gain bit
  46  * 0x0100: high gain bit
  47  * gain = enable * (1 + regH) * (1 + regM) * z * regL
  48  *
  49  * Gain implementation
  50  * Want to do something similar to mt9v011.c's set_balance
  51  *
  52  * Gain does not vary with resolution (checked 640x480 vs 1600x1200)
  53  *
  54  * Constant derivation:
  55  *
  56  * Raw data:
  57  * Gain,   GTOP,   B,     R,      GBOT
  58  * 1.00,   0x105C, 0x1068, 0x10C8, 0x105C
  59  * 1.20,   0x106E, 0x107E, 0x10D6, 0x106E
  60  * 1.40,   0x10C0, 0x10CA, 0x10E5, 0x10C0
  61  * 1.60,   0x10C9, 0x10D4, 0x10F3, 0x10C9
  62  * 1.80,   0x10D2, 0x10DE, 0x11C1, 0x10D2
  63  * 2.00,   0x10DC, 0x10E9, 0x11C8, 0x10DC
  64  * 2.20,   0x10E5, 0x10F3, 0x11CF, 0x10E5
  65  * 2.40,   0x10EE, 0x10FE, 0x11D7, 0x10EE
  66  * 2.60,   0x10F7, 0x11C4, 0x11DE, 0x10F7
  67  * 2.80,   0x11C0, 0x11CA, 0x11E5, 0x11C0
  68  * 3.00,   0x11C5, 0x11CF, 0x11ED, 0x11C5
  69  *
  70  * zR = 0.0069605943152454778
  71  *      about 3/431 = 0.0069605568445475635
  72  * zB = 0.0095695970695970703
  73  *      about 6/627 = 0.0095693779904306216
  74  * zG = 0.010889328063241107
  75  *      about 6/551 = 0.010889292196007259
  76  * about 10 bits for constant + 7 bits for value => at least 17 bit
  77  * intermediate with 32 bit ints should be fine for overflow etc
  78  * Essentially gains are in range 0-0x001FF
  79  *
  80  * However, V4L expects a main gain channel + R and B balance
  81  * To keep things simple for now saturate the values of balance is too high/low
  82  * This isn't really ideal but easy way to fit the Linux model
  83  *
  84  * Converted using gain model turns out to be quite linear:
  85  * Gain, GTOP, B, R, GBOT
  86  * 1.00, 92, 104, 144, 92
  87  * 1.20, 110, 126, 172, 110
  88  * 1.40, 128, 148, 202, 128
  89  * 1.60, 146, 168, 230, 146
  90  * 1.80, 164, 188, 260, 164
  91  * 2.00, 184, 210, 288, 184
  92  * 2.20, 202, 230, 316, 202
  93  * 2.40, 220, 252, 348, 220
  94  * 2.60, 238, 272, 376, 238
  95  * 2.80, 256, 296, 404, 256
  96  * 3.00, 276, 316, 436, 276
  97  *
  98  * Maximum gain is 0x7FF * 2 * 2 => 0x1FFC (8188)
  99  * or about 13 effective bits of gain
 100  * The highest the commercial driver goes in my setup 436
 101  * However, because could *maybe* damage circuits
 102  * limit the gain until have a reason to go higher
 103  * Solution: gain clipped and warning emitted
 104  */
 105 #define GAIN_MAX                511
 106
 107 /* Frame sync is a short read */
 108 #define BULK_SIZE               0x4000
 109
 110 /* MT9E001 reg names to give a rough approximation */
 111 #define REG_COARSE_INTEGRATION_TIME_    0x3012
 112 #define REG_GROUPED_PARAMETER_HOLD_     0x3022
 113 #define REG_MODE_SELECT                 0x0100
 114 #define REG_OP_SYS_CLK_DIV              0x030A
 115 #define REG_VT_SYS_CLK_DIV              0x0302
 116 #define REG_PRE_PLL_CLK_DIV             0x0304
 117 #define REG_VT_PIX_CLK_DIV              0x0300
 118 #define REG_OP_PIX_CLK_DIV              0x0308
 119 #define REG_PLL_MULTIPLIER              0x0306
 120 #define REG_COARSE_INTEGRATION_TIME_    0x3012
 121 #define REG_FRAME_LENGTH_LINES          0x0340
 122 #define REG_FRAME_LENGTH_LINES_         0x300A
 123 #define REG_GREEN1_GAIN                 0x3056
 124 #define REG_GREEN2_GAIN                 0x305C
 125 #define REG_GROUPED_PARAMETER_HOLD      0x0104
 126 #define REG_LINE_LENGTH_PCK_            0x300C
 127 #define REG_MODE_SELECT                 0x0100
 128 #define REG_PLL_MULTIPLIER              0x0306
 129 #define REG_READ_MODE                   0x3040
 130 #define REG_BLUE_GAIN                   0x3058
 131 #define REG_RED_GAIN                    0x305A
 132 #define REG_RESET_REGISTER              0x301A
 133 #define REG_SCALE_M                     0x0404
 134 #define REG_SCALING_MODE                0x0400
 135 #define REG_SOFTWARE_RESET              0x0103
 136 #define REG_X_ADDR_END                  0x0348
 137 #define REG_X_ADDR_START                0x0344
 138 #define REG_X_ADDR_START                0x0344
 139 #define REG_X_OUTPUT_SIZE               0x034C
 140 #define REG_Y_ADDR_END                  0x034A
 141 #define REG_Y_ADDR_START                0x0346
 142 #define REG_Y_OUTPUT_SIZE               0x034E
 143
 144
 145 /* specific webcam descriptor */
 146 struct sd {
 147         struct gspca_dev gspca_dev;     /* !! must be the first item */
 148         /* How many bytes this frame */
 149         unsigned int this_f;
 150
 151         /*
 152         Device has separate gains for each Bayer quadrant
 153         V4L supports master gain which is referenced to G1/G2 and supplies
 154         individual balance controls for R/B
 155         */
 156         struct v4l2_ctrl *blue;
 157         struct v4l2_ctrl *red;
 158 };
 159
 160 /* Used to simplify reg write error handling */
 161 struct cmd {
 162         u16 value;
 163         u16 index;
 164 };
 165
 166 static const struct v4l2_pix_format vga_mode[] = {
 167         {800, 600,
 168                 V4L2_PIX_FMT_SGRBG8,
 169                 V4L2_FIELD_NONE,
 170                 .bytesperline = 800,
 171                 .sizeimage = 800 * 600,
 172                 .colorspace = V4L2_COLORSPACE_SRGB},
 173         {1600, 1200,
 174                 V4L2_PIX_FMT_SGRBG8,
 175                 V4L2_FIELD_NONE,
 176                 .bytesperline = 1600,
 177                 .sizeimage = 1600 * 1200,
 178                 .colorspace = V4L2_COLORSPACE_SRGB},
 179         {3264, 2448,
 180                 V4L2_PIX_FMT_SGRBG8,
 181                 V4L2_FIELD_NONE,
 182                 .bytesperline = 3264,
 183                 .sizeimage = 3264 * 2448,
 184                 .colorspace = V4L2_COLORSPACE_SRGB},
 185 };
 186
 187 /*
 188  * As theres no known frame sync, the only way to keep synced is to try hard
 189  * to never miss any packets
 190  */
 191 #if MAX_NURBS < 4
 192 #error "Not enough URBs in the gspca table"
 193 #endif
 194
 195 static int val_reply(struct gspca_dev *gspca_dev, const char *reply, int rc)
 196 {
 197         if (rc < 0) {
 198                 PERR("reply has error %d", rc);
 199                 return -EIO;
 200         }
 201         if (rc != 1) {
 202                 PERR("Bad reply size %d", rc);
 203                 return -EIO;
 204         }
 205         if (reply[0] != 0x08) {
 206                 PERR("Bad reply 0x%02X", reply[0]);
 207                 return -EIO;
 208         }
 209         return 0;
 210 }
 211
 212 static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index)
 213 {
 214         char buff[1];
 215         int rc;
 216
 217         PDEBUG(D_USBO,
 218                 "reg_w bReq=0x0B, bReqT=0xC0, wVal=0x%04X, wInd=0x%04X\n",
 219                 value, index);
 220         rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0),
 221                 0x0B, 0xC0, value, index, buff, 1, 500);
 222         PDEBUG(D_USBO, "rc=%d, ret={0x%02X}", rc, buff[0]);
 223         if (rc < 0) {
 224                 PERR("Failed reg_w(0x0B, 0xC0, 0x%04X, 0x%04X) w/ rc %d\n",
 225                         value, index, rc);
 226                 gspca_dev->usb_err = rc;
 227                 return;
 228         }
 229         if (val_reply(gspca_dev, buff, rc)) {
 230                 PERR("Bad reply to reg_w(0x0B, 0xC0, 0x%04X, 0x%04X\n",
 231                         value, index);
 232                 gspca_dev->usb_err = -EIO;
 233         }
 234 }
 235
 236 static void reg_w_buf(struct gspca_dev *gspca_dev,
 237                 const struct cmd *p, int l)
 238 {
 239         do {
 240                 reg_w(gspca_dev, p->value, p->index);
 241                 p++;
 242         } while (--l > 0);
 243 }
 244
 245 static void setexposure(struct gspca_dev *gspca_dev, s32 val)
 246 {
 247         u16 value;
 248         unsigned int w = gspca_dev->pixfmt.width;
 249
 250         if (w == 800)
 251                 value = val * 5;
 252         else if (w == 1600)
 253                 value = val * 3;
 254         else if (w == 3264)
 255                 value = val * 3 / 2;
 256         else {
 257                 PERR("Invalid width %u\n", w);
 258                 gspca_dev->usb_err = -EINVAL;
 259                 return;
 260         }
 261         PDEBUG(D_STREAM, "exposure: 0x%04X ms\n", value);
 262         /* Wonder if theres a good reason for sending it twice */
 263         /* probably not but leave it in because...why not */
 264         reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
 265         reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
 266 }
 267
 268 static int gainify(int in)
 269 {
 270         /*
 271          * TODO: check if there are any issues with corner cases
 272          * 0x000 (0):0x07F (127): regL
 273          * 0x080 (128) - 0x0FF (255): regM, regL
 274          * 0x100 (256) - max: regH, regM, regL
 275          */
 276         if (in <= 0x7F)
 277                 return 0x1000 | in;
 278         else if (in <= 0xFF)
 279                 return 0x1080 | in / 2;
 280         else
 281                 return 0x1180 | in / 4;
 282 }
 283
 284 static void setggain(struct gspca_dev *gspca_dev, u16 global_gain)
 285 {
 286         u16 normalized;
 287
 288         normalized = gainify(global_gain);
 289         PDEBUG(D_STREAM, "gain G1/G2 (0x%04X): 0x%04X (src 0x%04X)\n",
 290                  REG_GREEN1_GAIN,
 291                  normalized, global_gain);
 292
 293         reg_w(gspca_dev, normalized, REG_GREEN1_GAIN);
 294         reg_w(gspca_dev, normalized, REG_GREEN2_GAIN);
 295 }
 296
 297 static void setbgain(struct gspca_dev *gspca_dev,
 298                 u16 gain, u16 global_gain)
 299 {
 300         u16 normalized;
 301
 302         normalized = global_gain +
 303                 ((u32)global_gain) * gain / GAIN_MAX;
 304         if (normalized > GAIN_MAX) {
 305                 PDEBUG(D_STREAM, "Truncating blue 0x%04X w/ value 0x%04X\n",
 306                          GAIN_MAX, normalized);
 307                 normalized = GAIN_MAX;
 308         }
 309         normalized = gainify(normalized);
 310         PDEBUG(D_STREAM, "gain B (0x%04X): 0x%04X w/ source 0x%04X\n",
 311                  REG_BLUE_GAIN, normalized, gain);
 312
 313         reg_w(gspca_dev, normalized, REG_BLUE_GAIN);
 314 }
 315
 316 static void setrgain(struct gspca_dev *gspca_dev,
 317                 u16 gain, u16 global_gain)
 318 {
 319         u16 normalized;
 320
 321         normalized = global_gain +
 322                 ((u32)global_gain) * gain / GAIN_MAX;
 323         if (normalized > GAIN_MAX) {
 324                 PDEBUG(D_STREAM, "Truncating gain 0x%04X w/ value 0x%04X\n",
 325                          GAIN_MAX, normalized);
 326                 normalized = GAIN_MAX;
 327         }
 328         normalized = gainify(normalized);
 329         PDEBUG(D_STREAM, "gain R (0x%04X): 0x%04X w / source 0x%04X\n",
 330                  REG_RED_GAIN, normalized, gain);
 331
 332         reg_w(gspca_dev, normalized, REG_RED_GAIN);
 333 }
 334
 335 static void configure_wh(struct gspca_dev *gspca_dev)
 336 {
 337         unsigned int w = gspca_dev->pixfmt.width;
 338
 339         PDEBUG(D_STREAM, "configure_wh\n");
 340
 341         if (w == 800) {
 342                 static const struct cmd reg_init_res[] = {
 343                         {0x0060, REG_X_ADDR_START},
 344                         {0x0CD9, REG_X_ADDR_END},
 345                         {0x0036, REG_Y_ADDR_START},
 346                         {0x098F, REG_Y_ADDR_END},
 347                         {0x07C7, REG_READ_MODE},
 348                 };
 349
 350                 reg_w_buf(gspca_dev,
 351                                reg_init_res, ARRAY_SIZE(reg_init_res));
 352         } else if (w == 1600) {
 353                 static const struct cmd reg_init_res[] = {
 354                         {0x009C, REG_X_ADDR_START},
 355                         {0x0D19, REG_X_ADDR_END},
 356                         {0x0068, REG_Y_ADDR_START},
 357                         {0x09C5, REG_Y_ADDR_END},
 358                         {0x06C3, REG_READ_MODE},
 359                 };
 360
 361                 reg_w_buf(gspca_dev,
 362                                reg_init_res, ARRAY_SIZE(reg_init_res));
 363         } else if (w == 3264) {
 364                 static const struct cmd reg_init_res[] = {
 365                         {0x00E8, REG_X_ADDR_START},
 366                         {0x0DA7, REG_X_ADDR_END},
 367                         {0x009E, REG_Y_ADDR_START},
 368                         {0x0A2D, REG_Y_ADDR_END},
 369                         {0x0241, REG_READ_MODE},
 370                 };
 371
 372                 reg_w_buf(gspca_dev,
 373                                reg_init_res, ARRAY_SIZE(reg_init_res));
 374         } else {
 375                 PERR("bad width %u\n", w);
 376                 gspca_dev->usb_err = -EINVAL;
 377                 return;
 378         }
 379
 380         reg_w(gspca_dev, 0x0000, REG_SCALING_MODE);
 381         reg_w(gspca_dev, 0x0010, REG_SCALE_M);
 382         reg_w(gspca_dev, w, REG_X_OUTPUT_SIZE);
 383         reg_w(gspca_dev, gspca_dev->pixfmt.height, REG_Y_OUTPUT_SIZE);
 384
 385         if (w == 800) {
 386                 reg_w(gspca_dev, 0x0384, REG_FRAME_LENGTH_LINES_);
 387                 reg_w(gspca_dev, 0x0960, REG_LINE_LENGTH_PCK_);
 388         } else if (w == 1600) {
 389                 reg_w(gspca_dev, 0x0640, REG_FRAME_LENGTH_LINES_);
 390                 reg_w(gspca_dev, 0x0FA0, REG_LINE_LENGTH_PCK_);
 391         } else if (w == 3264) {
 392                 reg_w(gspca_dev, 0x0B4B, REG_FRAME_LENGTH_LINES_);
 393                 reg_w(gspca_dev, 0x1F40, REG_LINE_LENGTH_PCK_);
 394         } else {
 395                 PERR("bad width %u\n", w);
 396                 gspca_dev->usb_err = -EINVAL;
 397                 return;
 398         }
 399 }
 400
 401 /* Packets that were encrypted, no idea if the grouping is significant */
 402 static void configure_encrypted(struct gspca_dev *gspca_dev)
 403 {
 404         static const struct cmd reg_init_begin[] = {
 405                 {0x0100, REG_SOFTWARE_RESET},
 406                 {0x0000, REG_MODE_SELECT},
 407                 {0x0100, REG_GROUPED_PARAMETER_HOLD},
 408                 {0x0004, REG_VT_PIX_CLK_DIV},
 409                 {0x0001, REG_VT_SYS_CLK_DIV},
 410                 {0x0008, REG_OP_PIX_CLK_DIV},
 411                 {0x0001, REG_OP_SYS_CLK_DIV},
 412                 {0x0004, REG_PRE_PLL_CLK_DIV},
 413                 {0x0040, REG_PLL_MULTIPLIER},
 414                 {0x0000, REG_GROUPED_PARAMETER_HOLD},
 415                 {0x0100, REG_GROUPED_PARAMETER_HOLD},
 416         };
 417         static const struct cmd reg_init_end[] = {
 418                 {0x0000, REG_GROUPED_PARAMETER_HOLD},
 419                 {0x0301, 0x31AE},
 420                 {0x0805, 0x3064},
 421                 {0x0071, 0x3170},
 422                 {0x10DE, REG_RESET_REGISTER},
 423                 {0x0000, REG_MODE_SELECT},
 424                 {0x0010, REG_PLL_MULTIPLIER},
 425                 {0x0100, REG_MODE_SELECT},
 426         };
 427
 428         PDEBUG(D_STREAM, "Encrypted begin, w = %u\n", gspca_dev->pixfmt.width);
 429         reg_w_buf(gspca_dev, reg_init_begin, ARRAY_SIZE(reg_init_begin));
 430         configure_wh(gspca_dev);
 431         reg_w_buf(gspca_dev, reg_init_end, ARRAY_SIZE(reg_init_end));
 432         reg_w(gspca_dev, 0x0100, REG_GROUPED_PARAMETER_HOLD);
 433         reg_w(gspca_dev, 0x0000, REG_GROUPED_PARAMETER_HOLD);
 434
 435         PDEBUG(D_STREAM, "Encrypted end\n");
 436 }
 437
 438 static int configure(struct gspca_dev *gspca_dev)
 439 {
 440         int rc;
 441         uint8_t buff[4];
 442
 443         PDEBUG(D_STREAM, "configure()\n");
 444
 445         /*
 446          * First driver sets a sort of encryption key
 447          * A number of futur requests of this type have wValue and wIndex
 448          * encrypted as follows:
 449          * -Compute key = this wValue rotate left by 4 bits
 450          *      (decrypt.py rotates right because we are decrypting)
 451          * -Later packets encrypt packets by XOR'ing with key
 452          *      XOR encrypt/decrypt is symmetrical
 453          *      wValue, and wIndex are encrypted
 454          *      bRequest is not and bRequestType is always 0xC0
 455          *              This allows resyncing if key is unknown?
 456          * By setting 0 we XOR with 0 and the shifting and XOR drops out
 457          */
 458         rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0),
 459                              0x16, 0xC0, 0x0000, 0x0000, buff, 2, 500);
 460         if (val_reply(gspca_dev, buff, rc)) {
 461                 PERR("failed key req");
 462                 return -EIO;
 463         }
 464
 465         /*
 466          * Next does some sort of 2 packet challenge / response
 467          * evidence suggests its an Atmel I2C crypto part but nobody cares to
 468          * look
 469          * (to make sure its not cloned hardware?)
 470          * Ignore: I want to work with their hardware, not clone it
 471          * 16 bytes out challenge, requestType: 0x40
 472          * 16 bytes in response, requestType: 0xC0
 473          */
 474
 475         rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0),
 476                              0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500);
 477         if (rc < 0) {
 478                 PERR("failed to replay packet 176 w/ rc %d\n", rc);
 479                 return rc;
 480         }
 481
 482         rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0),
 483                              0x01, 0x40, 0x0000, 0x000F, NULL, 0, 500);
 484         if (rc < 0) {
 485                 PERR("failed to replay packet 178 w/ rc %d\n", rc);
 486                 return rc;
 487         }
 488
 489         rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0),
 490                              0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500);
 491         if (rc < 0) {
 492                 PERR("failed to replay packet 180 w/ rc %d\n", rc);
 493                 return rc;
 494         }
 495
 496         /*
 497          * Serial number?  Doesn't seem to be required
 498          * cam1: \xE6\x0D\x00\x00, cam2: \x70\x19\x00\x00
 499          * rc = usb_control_msg(gspca_dev->dev,
 500          *                      usb_rcvctrlpipe(gspca_dev->dev, 0),
 501          *                      0x20, 0xC0, 0x0000, 0x0000, buff, 4, 500);
 502          */
 503
 504         /* Large (EEPROM?) read, skip it since no idea what to do with it */
 505         gspca_dev->usb_err = 0;
 506         configure_encrypted(gspca_dev);
 507         if (gspca_dev->usb_err)
 508                 return gspca_dev->usb_err;
 509
 510         /* Omitted this by accident, does not work without it */
 511         rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0),
 512                              0x01, 0x40, 0x0003, 0x000F, NULL, 0, 500);
 513         if (rc < 0) {
 514                 PERR("failed to replay final packet w/ rc %d\n", rc);
 515                 return rc;
 516         }
 517
 518         PDEBUG(D_STREAM, "Configure complete\n");
 519         return 0;
 520 }
 521
 522 static int sd_config(struct gspca_dev *gspca_dev,
 523                      const struct usb_device_id *id)
 524 {
 525         gspca_dev->cam.cam_mode = vga_mode;
 526         gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
 527
 528         /* Yes we want URBs and we want them now! */
 529         gspca_dev->cam.no_urb_create = 0;
 530         gspca_dev->cam.bulk_nurbs = 4;
 531         /* Largest size the windows driver uses */
 532         gspca_dev->cam.bulk_size = BULK_SIZE;
 533         /* Def need to use bulk transfers */
 534         gspca_dev->cam.bulk = 1;
 535
 536         return 0;
 537 }
 538
 539 static int sd_start(struct gspca_dev *gspca_dev)
 540 {
 541         struct sd *sd = (struct sd *) gspca_dev;
 542         int rc;
 543
 544         sd->this_f = 0;
 545
 546         rc = configure(gspca_dev);
 547         if (rc < 0) {
 548                 PERR("Failed configure");
 549                 return rc;
 550         }
 551         /* First two frames have messed up gains
 552         Drop them to avoid special cases in user apps? */
 553         return 0;
 554 }
 555
 556 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 557                         u8 *data,       /* isoc packet */
 558                         int len)        /* iso packet length */
 559 {
 560         struct sd *sd = (struct sd *) gspca_dev;
 561
 562         if (len != BULK_SIZE) {
 563                 /* can we finish a frame? */
 564                 if (sd->this_f + len == gspca_dev->pixfmt.sizeimage) {
 565                         gspca_frame_add(gspca_dev, LAST_PACKET, data, len);
 566                         PDEBUG(D_FRAM, "finish frame sz %u/%u w/ len %u\n",
 567                                  sd->this_f, gspca_dev->pixfmt.sizeimage, len);
 568                 /* lost some data, discard the frame */
 569                 } else {
 570                         gspca_frame_add(gspca_dev, DISCARD_PACKET, NULL, 0);
 571                         PDEBUG(D_FRAM, "abort frame sz %u/%u w/ len %u\n",
 572                                  sd->this_f, gspca_dev->pixfmt.sizeimage, len);
 573                 }
 574                 sd->this_f = 0;
 575         } else {
 576                 if (sd->this_f == 0)
 577                         gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
 578                 else
 579                         gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
 580                 sd->this_f += len;
 581         }
 582 }
 583
 584 static int sd_init(struct gspca_dev *gspca_dev)
 585 {
 586         return 0;
 587 }
 588
 589 static int sd_s_ctrl(struct v4l2_ctrl *ctrl)
 590 {
 591         struct gspca_dev *gspca_dev =
 592                 container_of(ctrl->handler, struct gspca_dev, ctrl_handler);
 593         struct sd *sd = (struct sd *) gspca_dev;
 594
 595         gspca_dev->usb_err = 0;
 596
 597         if (!gspca_dev->streaming)
 598                 return 0;
 599
 600         switch (ctrl->id) {
 601         case V4L2_CID_EXPOSURE:
 602                 setexposure(gspca_dev, ctrl->val);
 603                 break;
 604         case V4L2_CID_GAIN:
 605                 /* gspca_dev->gain automatically updated */
 606                 setggain(gspca_dev, gspca_dev->gain->val);
 607                 break;
 608         case V4L2_CID_BLUE_BALANCE:
 609                 sd->blue->val = ctrl->val;
 610                 setbgain(gspca_dev, sd->blue->val, gspca_dev->gain->val);
 611                 break;
 612         case V4L2_CID_RED_BALANCE:
 613                 sd->red->val = ctrl->val;
 614                 setrgain(gspca_dev, sd->red->val, gspca_dev->gain->val);
 615                 break;
 616         }
 617         return gspca_dev->usb_err;
 618 }
 619
 620 static const struct v4l2_ctrl_ops sd_ctrl_ops = {
 621         .s_ctrl = sd_s_ctrl,
 622 };
 623
 624 static int sd_init_controls(struct gspca_dev *gspca_dev)
 625 {
 626         struct sd *sd = (struct sd *) gspca_dev;
 627         struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler;
 628
 629         gspca_dev->vdev.ctrl_handler = hdl;
 630         v4l2_ctrl_handler_init(hdl, 4);
 631
 632         gspca_dev->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 633         /* Mostly limited by URB timeouts */
 634         /* XXX: make dynamic based on frame rate? */
 635                 V4L2_CID_EXPOSURE, 0, 800, 1, 350);
 636         gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 637                         V4L2_CID_GAIN, 0, 511, 1, 128);
 638         sd->blue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 639                         V4L2_CID_BLUE_BALANCE, 0, 1023, 1, 80);
 640         sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 641                         V4L2_CID_RED_BALANCE, 0, 1023, 1, 295);
 642
 643         if (hdl->error) {
 644                 PERR("Could not initialize controls\n");
 645                 return hdl->error;
 646         }
 647         return 0;
 648 }
 649
 650 /* sub-driver description */
 651 static const struct sd_desc sd_desc = {
 652         .name = MODULE_NAME,
 653         .config = sd_config,
 654         .init = sd_init,
 655         .init_controls = sd_init_controls,
 656         .start = sd_start,
 657         .pkt_scan = sd_pkt_scan,
 658 };
 659
 660 /* Table of supported USB devices */
 661 static const struct usb_device_id device_table[] = {
 662         /* Commented out devices should be related */
 663         /* AS: AmScope, TT: ToupTek */
 664         /* { USB_DEVICE(0x0547, 0x6035) },  TT UCMOS00350KPA */
 665         /* { USB_DEVICE(0x0547, 0x6130) },  TT UCMOS01300KPA */
 666         /* { USB_DEVICE(0x0547, 0x6200) },  TT UCMOS02000KPA */
 667         /* { USB_DEVICE(0x0547, 0x6310) },  TT UCMOS03100KPA */
 668         /* { USB_DEVICE(0x0547, 0x6510) },  TT UCMOS05100KPA */
 669         /* { USB_DEVICE(0x0547, 0x6800) },  TT UCMOS08000KPA */
 670         /* { USB_DEVICE(0x0547, 0x6801) },  TT UCMOS08000KPB */
 671         { USB_DEVICE(0x0547, 0x6801) }, /* TT UCMOS08000KPB, AS MU800 */
 672         /* { USB_DEVICE(0x0547, 0x6900) },  TT UCMOS09000KPA */
 673         /* { USB_DEVICE(0x0547, 0x6901) },  TT UCMOS09000KPB */
 674         /* { USB_DEVICE(0x0547, 0x6010) },  TT UCMOS10000KPA */
 675         /* { USB_DEVICE(0x0547, 0x6014) },  TT UCMOS14000KPA */
 676         /* { USB_DEVICE(0x0547, 0x6131) },  TT UCMOS01300KMA */
 677         /* { USB_DEVICE(0x0547, 0x6511) },  TT UCMOS05100KMA */
 678         /* { USB_DEVICE(0x0547, 0x8080) },  TT UHCCD00800KPA */
 679         /* { USB_DEVICE(0x0547, 0x8140) },  TT UHCCD01400KPA */
 680         /* { USB_DEVICE(0x0547, 0x8141) },  TT EXCCD01400KPA */
 681         /* { USB_DEVICE(0x0547, 0x8200) },  TT UHCCD02000KPA */
 682         /* { USB_DEVICE(0x0547, 0x8201) },  TT UHCCD02000KPB */
 683         /* { USB_DEVICE(0x0547, 0x8310) },  TT UHCCD03100KPA */
 684         /* { USB_DEVICE(0x0547, 0x8500) },  TT UHCCD05000KPA */
 685         /* { USB_DEVICE(0x0547, 0x8510) },  TT UHCCD05100KPA */
 686         /* { USB_DEVICE(0x0547, 0x8600) },  TT UHCCD06000KPA */
 687         /* { USB_DEVICE(0x0547, 0x8800) },  TT UHCCD08000KPA */
 688         /* { USB_DEVICE(0x0547, 0x8315) },  TT UHCCD03150KPA */
 689         /* { USB_DEVICE(0x0547, 0x7800) },  TT UHCCD00800KMA */
 690         /* { USB_DEVICE(0x0547, 0x7140) },  TT UHCCD01400KMA */
 691         /* { USB_DEVICE(0x0547, 0x7141) },  TT UHCCD01400KMB */
 692         /* { USB_DEVICE(0x0547, 0x7200) },  TT UHCCD02000KMA */
 693         /* { USB_DEVICE(0x0547, 0x7315) },  TT UHCCD03150KMA */
 694         { }
 695 };
 696 MODULE_DEVICE_TABLE(usb, device_table);
 697
 698 static int sd_probe(struct usb_interface *intf,
 699                     const struct usb_device_id *id)
 700 {
 701         return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
 702                              THIS_MODULE);
 703 }
 704
 705 static struct usb_driver sd_driver = {
 706         .name = MODULE_NAME,
 707         .id_table = device_table,
 708         .probe = sd_probe,
 709         .disconnect = gspca_disconnect,
 710 #ifdef CONFIG_PM
 711         .suspend = gspca_suspend,
 712         .resume = gspca_resume,
 713 #endif
 714 };
 715
 716 static int __init sd_mod_init(void)
 717 {
 718         int ret;
 719
 720         ret = usb_register(&sd_driver);
 721         if (ret < 0)
 722                 return ret;
 723         return 0;
 724 }
 725 static void __exit sd_mod_exit(void)
 726 {
 727         usb_deregister(&sd_driver);
 728 }
 729
 730 module_init(sd_mod_init);
 731 module_exit(sd_mod_exit);