Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / usb / cx231xx / cx231xx-pcb-cfg.h
1 /*
2    cx231xx-pcb-cfg.h - driver for Conexant
3                 Cx23100/101/102 USB video capture devices
4
5    Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
6
7    This program is free software; you can redistribute it and/or modify
8    it under the terms of the GNU General Public License as published by
9    the Free Software Foundation; either version 2 of the License, or
10    (at your option) any later version.
11
12    This program is distributed in the hope that it will be useful,
13    but WITHOUT ANY WARRANTY; without even the implied warranty of
14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15    GNU General Public License for more details.
16
17    You should have received a copy of the GNU General Public License
18    along with this program; if not, write to the Free Software
19    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  */
21
22 #ifndef _PCB_CONFIG_H_
23 #define _PCB_CONFIG_H_
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27
28 /***************************************************************************
29                                 * Class Information *
30 ***************************************************************************/
31 #define CLASS_DEFAULT       0xFF
32
33 enum VENDOR_REQUEST_TYPE {
34         /* Set/Get I2C */
35         VRT_SET_I2C0 = 0x0,
36         VRT_SET_I2C1 = 0x1,
37         VRT_SET_I2C2 = 0x2,
38         VRT_GET_I2C0 = 0x4,
39         VRT_GET_I2C1 = 0x5,
40         VRT_GET_I2C2 = 0x6,
41
42         /* Set/Get GPIO */
43         VRT_SET_GPIO = 0x8,
44         VRT_GET_GPIO = 0x9,
45
46         /* Set/Get GPIE */
47         VRT_SET_GPIE = 0xA,
48         VRT_GET_GPIE = 0xB,
49
50         /* Set/Get Register Control/Status */
51         VRT_SET_REGISTER = 0xC,
52         VRT_GET_REGISTER = 0xD,
53
54         /* Get Extended Compat ID Descriptor */
55         VRT_GET_EXTCID_DESC = 0xFF,
56 };
57
58 enum BYTE_ENABLE_MASK {
59         ENABLE_ONE_BYTE = 0x1,
60         ENABLE_TWE_BYTE = 0x3,
61         ENABLE_THREE_BYTE = 0x7,
62         ENABLE_FOUR_BYTE = 0xF,
63 };
64
65 #define SPEED_MASK      0x1
66 enum USB_SPEED{
67         FULL_SPEED = 0x0,       /* 0: full speed */
68         HIGH_SPEED = 0x1        /* 1: high speed */
69 };
70
71 #define TS_MASK         0x6
72 enum TS_PORT{
73         NO_TS_PORT = 0x0,       /* 2'b00: Neither port used. PCB not a Hybrid,
74                                    only offers Analog TV or Video */
75         TS1_PORT = 0x4,         /* 2'b10: TS1 Input (Hybrid mode :
76                                 Digital or External Analog/Compressed source) */
77         TS1_TS2_PORT = 0x6,     /* 2'b11: TS1 & TS2 Inputs
78                                 (Dual inputs from Digital and/or
79                                 External Analog/Compressed sources) */
80         TS1_EXT_CLOCK = 0x6,    /* 2'b11: TS1 & TS2 as selector
81                                                 to external clock */
82         TS1VIP_TS2_PORT = 0x2   /* 2'b01: TS1 used as 656/VIP Output,
83                                    TS2 Input (from Compressor) */
84 };
85
86 #define EAVP_MASK       0x8
87 enum EAV_PRESENT{
88         NO_EXTERNAL_AV = 0x0,   /* 0: No External A/V inputs
89                                                 (no need for i2s blcok),
90                                                 Analog Tuner must be present */
91         EXTERNAL_AV = 0x8       /* 1: External A/V inputs
92                                                 present (requires i2s blk) */
93 };
94
95 #define ATM_MASK        0x30
96 enum AT_MODE{
97         DIF_TUNER = 0x30,       /* 2'b11: IF Tuner (requires use of DIF) */
98         BASEBAND_SOUND = 0x20,  /* 2'b10: Baseband Composite &
99                                                 Sound-IF Signals present */
100         NO_TUNER = 0x10         /* 2'b0x: No Analog Tuner present */
101 };
102
103 #define PWR_SEL_MASK    0x40
104 enum POWE_TYPE{
105         SELF_POWER = 0x0,       /* 0: self power */
106         BUS_POWER = 0x40        /* 1: bus power */
107 };
108
109 enum USB_POWE_TYPE{
110         USB_SELF_POWER = 0,
111         USB_BUS_POWER
112 };
113
114 #define BO_0_MASK       0x80
115 enum AVDEC_STATUS{
116         AVDEC_DISABLE = 0x0,    /* 0: A/V Decoder Disabled */
117         AVDEC_ENABLE = 0x80     /* 1: A/V Decoder Enabled */
118 };
119
120 #define BO_1_MASK       0x100
121
122 #define BUSPOWER_MASK   0xC4    /* for Polaris spec 0.8 */
123 #define SELFPOWER_MASK  0x86
124
125 /***************************************************************************/
126 #define NOT_DECIDE_YET  0xFE
127 #define NOT_SUPPORTED   0xFF
128
129 /***************************************************************************
130                                 * for mod field use *
131 ***************************************************************************/
132 #define MOD_DIGITAL     0x1
133 #define MOD_ANALOG      0x2
134 #define MOD_DIF         0x4
135 #define MOD_EXTERNAL    0x8
136 #define CAP_ALL_MOD     0x0f
137
138 /***************************************************************************
139                                 * source define *
140 ***************************************************************************/
141 #define SOURCE_DIGITAL          0x1
142 #define SOURCE_ANALOG           0x2
143 #define SOURCE_DIF              0x4
144 #define SOURCE_EXTERNAL         0x8
145 #define SOURCE_TS_BDA                   0x10
146 #define SOURCE_TS_ENCODE                0x20
147 #define SOURCE_TS_EXTERNAL      0x40
148
149 /***************************************************************************
150                                 * interface information define *
151 ***************************************************************************/
152 struct INTERFACE_INFO {
153         u8 interrupt_index;
154         u8 ts1_index;
155         u8 ts2_index;
156         u8 audio_index;
157         u8 video_index;
158         u8 vanc_index;          /* VBI */
159         u8 hanc_index;          /* Sliced CC */
160         u8 ir_index;
161 };
162
163 enum INDEX_INTERFACE_INFO{
164         INDEX_INTERRUPT = 0x0,
165         INDEX_TS1,
166         INDEX_TS2,
167         INDEX_AUDIO,
168         INDEX_VIDEO,
169         INDEX_VANC,
170         INDEX_HANC,
171         INDEX_IR,
172 };
173
174 /***************************************************************************
175                                 * configuration information define *
176 ***************************************************************************/
177 struct CONFIG_INFO {
178         u8 config_index;
179         struct INTERFACE_INFO interface_info;
180 };
181
182 struct pcb_config {
183         u8 index;
184         u8 type;                /* bus power or self power,
185                                            self power--0, bus_power--1 */
186         u8 speed;               /* usb speed, 2.0--1, 1.1--0 */
187         u8 mode;                /* digital , anlog, dif or external A/V */
188         u32 ts1_source;         /* three source -- BDA,External,encode */
189         u32 ts2_source;
190         u32 analog_source;
191         u8 digital_index;       /* bus-power used */
192         u8 analog_index;        /* bus-power used */
193         u8 dif_index;           /* bus-power used */
194         u8 external_index;      /* bus-power used */
195         u8 config_num;          /* current config num, 0,1,2,
196                                                    for self-power, always 0 */
197         struct CONFIG_INFO hs_config_info[3];
198         struct CONFIG_INFO fs_config_info[3];
199 };
200
201 enum INDEX_PCB_CONFIG{
202         INDEX_SELFPOWER_DIGITAL_ONLY = 0x0,
203         INDEX_SELFPOWER_DUAL_DIGITAL,
204         INDEX_SELFPOWER_ANALOG_ONLY,
205         INDEX_SELFPOWER_DUAL,
206         INDEX_SELFPOWER_TRIPLE,
207         INDEX_SELFPOWER_COMPRESSOR,
208         INDEX_BUSPOWER_DIGITAL_ONLY,
209         INDEX_BUSPOWER_ANALOG_ONLY,
210         INDEX_BUSPOWER_DIF_ONLY,
211         INDEX_BUSPOWER_EXTERNAL_ONLY,
212         INDEX_BUSPOWER_EXTERNAL_ANALOG,
213         INDEX_BUSPOWER_EXTERNAL_DIF,
214         INDEX_BUSPOWER_EXTERNAL_DIGITAL,
215         INDEX_BUSPOWER_DIGITAL_ANALOG,
216         INDEX_BUSPOWER_DIGITAL_DIF,
217         INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL,
218         INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL,
219 };
220
221 /***************************************************************************/
222 struct cx231xx;
223
224 int initialize_cx231xx(struct cx231xx *p_dev);
225
226 #endif