kernel/drivers/media/usb/as102/as102_fw.c

   1 /*
   2  * Abilis Systems Single DVB-T Receiver
   3  * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
   4  * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2, or (at your option)
   9  * any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16 #include <linux/kernel.h>
  17 #include <linux/errno.h>
  18 #include <linux/ctype.h>
  19 #include <linux/delay.h>
  20 #include <linux/firmware.h>
  21
  22 #include "as102_drv.h"
  23 #include "as102_fw.h"
  24
  25 static const char as102_st_fw1[] = "as102_data1_st.hex";
  26 static const char as102_st_fw2[] = "as102_data2_st.hex";
  27 static const char as102_dt_fw1[] = "as102_data1_dt.hex";
  28 static const char as102_dt_fw2[] = "as102_data2_dt.hex";
  29
  30 static unsigned char atohx(unsigned char *dst, char *src)
  31 {
  32         unsigned char value = 0;
  33
  34         char msb = tolower(*src) - '0';
  35         char lsb = tolower(*(src + 1)) - '0';
  36
  37         if (msb > 9)
  38                 msb -= 7;
  39         if (lsb > 9)
  40                 lsb -= 7;
  41
  42         *dst = value = ((msb & 0xF) << 4) | (lsb & 0xF);
  43         return value;
  44 }
  45
  46 /*
  47  * Parse INTEL HEX firmware file to extract address and data.
  48  */
  49 static int parse_hex_line(unsigned char *fw_data, unsigned char *addr,
  50                           unsigned char *data, int *dataLength,
  51                           unsigned char *addr_has_changed) {
  52
  53         int count = 0;
  54         unsigned char *src, dst;
  55
  56         if (*fw_data++ != ':') {
  57                 pr_err("invalid firmware file\n");
  58                 return -EFAULT;
  59         }
  60
  61         /* locate end of line */
  62         for (src = fw_data; *src != '\n'; src += 2) {
  63                 atohx(&dst, src);
  64                 /* parse line to split addr / data */
  65                 switch (count) {
  66                 case 0:
  67                         *dataLength = dst;
  68                         break;
  69                 case 1:
  70                         addr[2] = dst;
  71                         break;
  72                 case 2:
  73                         addr[3] = dst;
  74                         break;
  75                 case 3:
  76                         /* check if data is an address */
  77                         if (dst == 0x04)
  78                                 *addr_has_changed = 1;
  79                         else
  80                                 *addr_has_changed = 0;
  81                         break;
  82                 case  4:
  83                 case  5:
  84                         if (*addr_has_changed)
  85                                 addr[(count - 4)] = dst;
  86                         else
  87                                 data[(count - 4)] = dst;
  88                         break;
  89                 default:
  90                         data[(count - 4)] = dst;
  91                         break;
  92                 }
  93                 count++;
  94         }
  95
  96         /* return read value + ':' + '\n' */
  97         return (count * 2) + 2;
  98 }
  99
 100 static int as102_firmware_upload(struct as10x_bus_adapter_t *bus_adap,
 101                                  unsigned char *cmd,
 102                                  const struct firmware *firmware) {
 103
 104         struct as10x_fw_pkt_t fw_pkt;
 105         int total_read_bytes = 0, errno = 0;
 106         unsigned char addr_has_changed = 0;
 107
 108         for (total_read_bytes = 0; total_read_bytes < firmware->size; ) {
 109                 int read_bytes = 0, data_len = 0;
 110
 111                 /* parse intel hex line */
 112                 read_bytes = parse_hex_line(
 113                                 (u8 *) (firmware->data + total_read_bytes),
 114                                 fw_pkt.raw.address,
 115                                 fw_pkt.raw.data,
 116                                 &data_len,
 117                                 &addr_has_changed);
 118
 119                 if (read_bytes <= 0)
 120                         goto error;
 121
 122                 /* detect the end of file */
 123                 total_read_bytes += read_bytes;
 124                 if (total_read_bytes == firmware->size) {
 125                         fw_pkt.u.request[0] = 0x00;
 126                         fw_pkt.u.request[1] = 0x03;
 127
 128                         /* send EOF command */
 129                         errno = bus_adap->ops->upload_fw_pkt(bus_adap,
 130                                                              (uint8_t *)
 131                                                              &fw_pkt, 2, 0);
 132                         if (errno < 0)
 133                                 goto error;
 134                 } else {
 135                         if (!addr_has_changed) {
 136                                 /* prepare command to send */
 137                                 fw_pkt.u.request[0] = 0x00;
 138                                 fw_pkt.u.request[1] = 0x01;
 139
 140                                 data_len += sizeof(fw_pkt.u.request);
 141                                 data_len += sizeof(fw_pkt.raw.address);
 142
 143                                 /* send cmd to device */
 144                                 errno = bus_adap->ops->upload_fw_pkt(bus_adap,
 145                                                                      (uint8_t *)
 146                                                                      &fw_pkt,
 147                                                                      data_len,
 148                                                                      0);
 149                                 if (errno < 0)
 150                                         goto error;
 151                         }
 152                 }
 153         }
 154 error:
 155         return (errno == 0) ? total_read_bytes : errno;
 156 }
 157
 158 int as102_fw_upload(struct as10x_bus_adapter_t *bus_adap)
 159 {
 160         int errno = -EFAULT;
 161         const struct firmware *firmware = NULL;
 162         unsigned char *cmd_buf = NULL;
 163         const char *fw1, *fw2;
 164         struct usb_device *dev = bus_adap->usb_dev;
 165
 166         /* select fw file to upload */
 167         if (dual_tuner) {
 168                 fw1 = as102_dt_fw1;
 169                 fw2 = as102_dt_fw2;
 170         } else {
 171                 fw1 = as102_st_fw1;
 172                 fw2 = as102_st_fw2;
 173         }
 174
 175         /* allocate buffer to store firmware upload command and data */
 176         cmd_buf = kzalloc(MAX_FW_PKT_SIZE, GFP_KERNEL);
 177         if (cmd_buf == NULL) {
 178                 errno = -ENOMEM;
 179                 goto error;
 180         }
 181
 182         /* request kernel to locate firmware file: part1 */
 183         errno = request_firmware(&firmware, fw1, &dev->dev);
 184         if (errno < 0) {
 185                 pr_err("%s: unable to locate firmware file: %s\n",
 186                        DRIVER_NAME, fw1);
 187                 goto error;
 188         }
 189
 190         /* initiate firmware upload */
 191         errno = as102_firmware_upload(bus_adap, cmd_buf, firmware);
 192         if (errno < 0) {
 193                 pr_err("%s: error during firmware upload part1\n",
 194                        DRIVER_NAME);
 195                 goto error;
 196         }
 197
 198         pr_info("%s: firmware: %s loaded with success\n",
 199                 DRIVER_NAME, fw1);
 200         release_firmware(firmware);
 201
 202         /* wait for boot to complete */
 203         mdelay(100);
 204
 205         /* request kernel to locate firmware file: part2 */
 206         errno = request_firmware(&firmware, fw2, &dev->dev);
 207         if (errno < 0) {
 208                 pr_err("%s: unable to locate firmware file: %s\n",
 209                        DRIVER_NAME, fw2);
 210                 goto error;
 211         }
 212
 213         /* initiate firmware upload */
 214         errno = as102_firmware_upload(bus_adap, cmd_buf, firmware);
 215         if (errno < 0) {
 216                 pr_err("%s: error during firmware upload part2\n",
 217                        DRIVER_NAME);
 218                 goto error;
 219         }
 220
 221         pr_info("%s: firmware: %s loaded with success\n",
 222                 DRIVER_NAME, fw2);
 223 error:
 224         kfree(cmd_buf);
 225         release_firmware(firmware);
 226
 227         return errno;
 228 }