kernel/drivers/media/rc/redrat3.c

   1 /*
   2  * USB RedRat3 IR Transceiver rc-core driver
   3  *
   4  * Copyright (c) 2011 by Jarod Wilson <jarod@redhat.com>
   5  *  based heavily on the work of Stephen Cox, with additional
   6  *  help from RedRat Ltd.
   7  *
   8  * This driver began life based an an old version of the first-generation
   9  * lirc_mceusb driver from the lirc 0.7.2 distribution. It was then
  10  * significantly rewritten by Stephen Cox with the aid of RedRat Ltd's
  11  * Chris Dodge.
  12  *
  13  * The driver was then ported to rc-core and significantly rewritten again,
  14  * by Jarod, using the in-kernel mceusb driver as a guide, after an initial
  15  * port effort was started by Stephen.
  16  *
  17  * TODO LIST:
  18  * - fix lirc not showing repeats properly
  19  * --
  20  *
  21  * The RedRat3 is a USB transceiver with both send & receive,
  22  * with 2 separate sensors available for receive to enable
  23  * both good long range reception for general use, and good
  24  * short range reception when required for learning a signal.
  25  *
  26  * http://www.redrat.co.uk/
  27  *
  28  * It uses its own little protocol to communicate, the required
  29  * parts of which are embedded within this driver.
  30  * --
  31  *
  32  * This program is free software; you can redistribute it and/or modify
  33  * it under the terms of the GNU General Public License as published by
  34  * the Free Software Foundation; either version 2 of the License, or
  35  * (at your option) any later version.
  36  *
  37  * This program is distributed in the hope that it will be useful,
  38  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  39  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  40  * GNU General Public License for more details.
  41  *
  42  * You should have received a copy of the GNU General Public License
  43  * along with this program; if not, write to the Free Software
  44  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  45  *
  46  */
  47
  48 #include <asm/unaligned.h>
  49 #include <linux/device.h>
  50 #include <linux/leds.h>
  51 #include <linux/module.h>
  52 #include <linux/slab.h>
  53 #include <linux/usb.h>
  54 #include <linux/usb/input.h>
  55 #include <media/rc-core.h>
  56
  57 /* Driver Information */
  58 #define DRIVER_AUTHOR "Jarod Wilson <jarod@redhat.com>"
  59 #define DRIVER_AUTHOR2 "The Dweller, Stephen Cox"
  60 #define DRIVER_DESC "RedRat3 USB IR Transceiver Driver"
  61 #define DRIVER_NAME "redrat3"
  62
  63 /* bulk data transfer types */
  64 #define RR3_ERROR               0x01
  65 #define RR3_MOD_SIGNAL_IN       0x20
  66 #define RR3_MOD_SIGNAL_OUT      0x21
  67
  68 /* Get the RR firmware version */
  69 #define RR3_FW_VERSION          0xb1
  70 #define RR3_FW_VERSION_LEN      64
  71 /* Send encoded signal bulk-sent earlier*/
  72 #define RR3_TX_SEND_SIGNAL      0xb3
  73 #define RR3_SET_IR_PARAM        0xb7
  74 #define RR3_GET_IR_PARAM        0xb8
  75 /* Blink the red LED on the device */
  76 #define RR3_BLINK_LED           0xb9
  77 /* Read serial number of device */
  78 #define RR3_READ_SER_NO         0xba
  79 #define RR3_SER_NO_LEN          4
  80 /* Start capture with the RC receiver */
  81 #define RR3_RC_DET_ENABLE       0xbb
  82 /* Stop capture with the RC receiver */
  83 #define RR3_RC_DET_DISABLE      0xbc
  84 /* Return the status of RC detector capture */
  85 #define RR3_RC_DET_STATUS       0xbd
  86 /* Reset redrat */
  87 #define RR3_RESET               0xa0
  88
  89 /* Max number of lengths in the signal. */
  90 #define RR3_IR_IO_MAX_LENGTHS   0x01
  91 /* Periods to measure mod. freq. */
  92 #define RR3_IR_IO_PERIODS_MF    0x02
  93 /* Size of memory for main signal data */
  94 #define RR3_IR_IO_SIG_MEM_SIZE  0x03
  95 /* Delta value when measuring lengths */
  96 #define RR3_IR_IO_LENGTH_FUZZ   0x04
  97 /* Timeout for end of signal detection */
  98 #define RR3_IR_IO_SIG_TIMEOUT   0x05
  99 /* Minimum value for pause recognition. */
 100 #define RR3_IR_IO_MIN_PAUSE     0x06
 101
 102 /* Clock freq. of EZ-USB chip */
 103 #define RR3_CLK                 24000000
 104 /* Clock periods per timer count */
 105 #define RR3_CLK_PER_COUNT       12
 106 /* (RR3_CLK / RR3_CLK_PER_COUNT) */
 107 #define RR3_CLK_CONV_FACTOR     2000000
 108 /* USB bulk-in IR data endpoint address */
 109 #define RR3_BULK_IN_EP_ADDR     0x82
 110
 111 /* Size of the fixed-length portion of the signal */
 112 #define RR3_DRIVER_MAXLENS      128
 113 #define RR3_MAX_SIG_SIZE        512
 114 #define RR3_TIME_UNIT           50
 115 #define RR3_END_OF_SIGNAL       0x7f
 116 #define RR3_TX_TRAILER_LEN      2
 117 #define RR3_RX_MIN_TIMEOUT      5
 118 #define RR3_RX_MAX_TIMEOUT      2000
 119
 120 /* The 8051's CPUCS Register address */
 121 #define RR3_CPUCS_REG_ADDR      0x7f92
 122
 123 #define USB_RR3USB_VENDOR_ID    0x112a
 124 #define USB_RR3USB_PRODUCT_ID   0x0001
 125 #define USB_RR3IIUSB_PRODUCT_ID 0x0005
 126
 127 struct redrat3_header {
 128         __be16 length;
 129         __be16 transfer_type;
 130 } __packed;
 131
 132 /* sending and receiving irdata */
 133 struct redrat3_irdata {
 134         struct redrat3_header header;
 135         __be32 pause;
 136         __be16 mod_freq_count;
 137         __be16 num_periods;
 138         __u8 max_lengths;
 139         __u8 no_lengths;
 140         __be16 max_sig_size;
 141         __be16 sig_size;
 142         __u8 no_repeats;
 143         __be16 lens[RR3_DRIVER_MAXLENS]; /* not aligned */
 144         __u8 sigdata[RR3_MAX_SIG_SIZE];
 145 } __packed;
 146
 147 /* firmware errors */
 148 struct redrat3_error {
 149         struct redrat3_header header;
 150         __be16 fw_error;
 151 } __packed;
 152
 153 /* table of devices that work with this driver */
 154 static struct usb_device_id redrat3_dev_table[] = {
 155         /* Original version of the RedRat3 */
 156         {USB_DEVICE(USB_RR3USB_VENDOR_ID, USB_RR3USB_PRODUCT_ID)},
 157         /* Second Version/release of the RedRat3 - RetRat3-II */
 158         {USB_DEVICE(USB_RR3USB_VENDOR_ID, USB_RR3IIUSB_PRODUCT_ID)},
 159         {}                      /* Terminating entry */
 160 };
 161
 162 /* Structure to hold all of our device specific stuff */
 163 struct redrat3_dev {
 164         /* core device bits */
 165         struct rc_dev *rc;
 166         struct device *dev;
 167
 168         /* led control */
 169         struct led_classdev led;
 170         atomic_t flash;
 171         struct usb_ctrlrequest flash_control;
 172         struct urb *flash_urb;
 173         u8 flash_in_buf;
 174
 175         /* save off the usb device pointer */
 176         struct usb_device *udev;
 177
 178         /* the receive endpoint */
 179         struct usb_endpoint_descriptor *ep_in;
 180         /* the buffer to receive data */
 181         void *bulk_in_buf;
 182         /* urb used to read ir data */
 183         struct urb *read_urb;
 184
 185         /* the send endpoint */
 186         struct usb_endpoint_descriptor *ep_out;
 187
 188         /* usb dma */
 189         dma_addr_t dma_in;
 190
 191         /* rx signal timeout timer */
 192         struct timer_list rx_timeout;
 193         u32 hw_timeout;
 194
 195         /* Is the device currently transmitting?*/
 196         bool transmitting;
 197
 198         /* store for current packet */
 199         struct redrat3_irdata irdata;
 200         u16 bytes_read;
 201
 202         u32 carrier;
 203
 204         char name[64];
 205         char phys[64];
 206 };
 207
 208 /*
 209  * redrat3_issue_async
 210  *
 211  *  Issues an async read to the ir data in port..
 212  *  sets the callback to be redrat3_handle_async
 213  */
 214 static void redrat3_issue_async(struct redrat3_dev *rr3)
 215 {
 216         int res;
 217
 218         res = usb_submit_urb(rr3->read_urb, GFP_ATOMIC);
 219         if (res)
 220                 dev_dbg(rr3->dev,
 221                         "%s: receive request FAILED! (res %d, len %d)\n",
 222                         __func__, res, rr3->read_urb->transfer_buffer_length);
 223 }
 224
 225 static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code)
 226 {
 227         if (!rr3->transmitting && (code != 0x40))
 228                 dev_info(rr3->dev, "fw error code 0x%02x: ", code);
 229
 230         switch (code) {
 231         case 0x00:
 232                 pr_cont("No Error\n");
 233                 break;
 234
 235         /* Codes 0x20 through 0x2f are IR Firmware Errors */
 236         case 0x20:
 237                 pr_cont("Initial signal pulse not long enough "
 238                         "to measure carrier frequency\n");
 239                 break;
 240         case 0x21:
 241                 pr_cont("Not enough length values allocated for signal\n");
 242                 break;
 243         case 0x22:
 244                 pr_cont("Not enough memory allocated for signal data\n");
 245                 break;
 246         case 0x23:
 247                 pr_cont("Too many signal repeats\n");
 248                 break;
 249         case 0x28:
 250                 pr_cont("Insufficient memory available for IR signal "
 251                         "data memory allocation\n");
 252                 break;
 253         case 0x29:
 254                 pr_cont("Insufficient memory available "
 255                         "for IrDa signal data memory allocation\n");
 256                 break;
 257
 258         /* Codes 0x30 through 0x3f are USB Firmware Errors */
 259         case 0x30:
 260                 pr_cont("Insufficient memory available for bulk "
 261                         "transfer structure\n");
 262                 break;
 263
 264         /*
 265          * Other error codes... These are primarily errors that can occur in
 266          * the control messages sent to the redrat
 267          */
 268         case 0x40:
 269                 if (!rr3->transmitting)
 270                         pr_cont("Signal capture has been terminated\n");
 271                 break;
 272         case 0x41:
 273                 pr_cont("Attempt to set/get and unknown signal I/O "
 274                         "algorithm parameter\n");
 275                 break;
 276         case 0x42:
 277                 pr_cont("Signal capture already started\n");
 278                 break;
 279
 280         default:
 281                 pr_cont("Unknown Error\n");
 282                 break;
 283         }
 284 }
 285
 286 static u32 redrat3_val_to_mod_freq(struct redrat3_irdata *irdata)
 287 {
 288         u32 mod_freq = 0;
 289         u16 mod_freq_count = be16_to_cpu(irdata->mod_freq_count);
 290
 291         if (mod_freq_count != 0)
 292                 mod_freq = (RR3_CLK * be16_to_cpu(irdata->num_periods)) /
 293                         (mod_freq_count * RR3_CLK_PER_COUNT);
 294
 295         return mod_freq;
 296 }
 297
 298 /* this function scales down the figures for the same result... */
 299 static u32 redrat3_len_to_us(u32 length)
 300 {
 301         u32 biglen = length * 1000;
 302         u32 divisor = (RR3_CLK_CONV_FACTOR) / 1000;
 303         u32 result = (u32) (biglen / divisor);
 304
 305         /* don't allow zero lengths to go back, breaks lirc */
 306         return result ? result : 1;
 307 }
 308
 309 /*
 310  * convert us back into redrat3 lengths
 311  *
 312  * length * 1000   length * 1000000
 313  * ------------- = ---------------- = micro
 314  * rr3clk / 1000       rr3clk
 315
 316  * 6 * 2       4 * 3        micro * rr3clk          micro * rr3clk / 1000
 317  * ----- = 4   ----- = 6    -------------- = len    ---------------------
 318  *   3           2             1000000                    1000
 319  */
 320 static u32 redrat3_us_to_len(u32 microsec)
 321 {
 322         u32 result;
 323         u32 divisor;
 324
 325         microsec = (microsec > IR_MAX_DURATION) ? IR_MAX_DURATION : microsec;
 326         divisor = (RR3_CLK_CONV_FACTOR / 1000);
 327         result = (u32)(microsec * divisor) / 1000;
 328
 329         /* don't allow zero lengths to go back, breaks lirc */
 330         return result ? result : 1;
 331 }
 332
 333 /* timer callback to send reset event */
 334 static void redrat3_rx_timeout(unsigned long data)
 335 {
 336         struct redrat3_dev *rr3 = (struct redrat3_dev *)data;
 337
 338         dev_dbg(rr3->dev, "calling ir_raw_event_reset\n");
 339         ir_raw_event_reset(rr3->rc);
 340 }
 341
 342 static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 343 {
 344         DEFINE_IR_RAW_EVENT(rawir);
 345         struct device *dev;
 346         unsigned i, trailer = 0;
 347         unsigned sig_size, single_len, offset, val;
 348         unsigned long delay;
 349         u32 mod_freq;
 350
 351         if (!rr3) {
 352                 pr_err("%s called with no context!\n", __func__);
 353                 return;
 354         }
 355
 356         dev = rr3->dev;
 357
 358         /* Make sure we reset the IR kfifo after a bit of inactivity */
 359         delay = usecs_to_jiffies(rr3->hw_timeout);
 360         mod_timer(&rr3->rx_timeout, jiffies + delay);
 361
 362         mod_freq = redrat3_val_to_mod_freq(&rr3->irdata);
 363         dev_dbg(dev, "Got mod_freq of %u\n", mod_freq);
 364
 365         /* process each rr3 encoded byte into an int */
 366         sig_size = be16_to_cpu(rr3->irdata.sig_size);
 367         for (i = 0; i < sig_size; i++) {
 368                 offset = rr3->irdata.sigdata[i];
 369                 val = get_unaligned_be16(&rr3->irdata.lens[offset]);
 370                 single_len = redrat3_len_to_us(val);
 371
 372                 /* we should always get pulse/space/pulse/space samples */
 373                 if (i % 2)
 374                         rawir.pulse = false;
 375                 else
 376                         rawir.pulse = true;
 377
 378                 rawir.duration = US_TO_NS(single_len);
 379                 /* Save initial pulse length to fudge trailer */
 380                 if (i == 0)
 381                         trailer = rawir.duration;
 382                 /* cap the value to IR_MAX_DURATION */
 383                 rawir.duration = (rawir.duration > IR_MAX_DURATION) ?
 384                                  IR_MAX_DURATION : rawir.duration;
 385
 386                 dev_dbg(dev, "storing %s with duration %d (i: %d)\n",
 387                         rawir.pulse ? "pulse" : "space", rawir.duration, i);
 388                 ir_raw_event_store_with_filter(rr3->rc, &rawir);
 389         }
 390
 391         /* add a trailing space, if need be */
 392         if (i % 2) {
 393                 rawir.pulse = false;
 394                 /* this duration is made up, and may not be ideal... */
 395                 if (trailer < US_TO_NS(1000))
 396                         rawir.duration = US_TO_NS(2800);
 397                 else
 398                         rawir.duration = trailer;
 399                 dev_dbg(dev, "storing trailing space with duration %d\n",
 400                         rawir.duration);
 401                 ir_raw_event_store_with_filter(rr3->rc, &rawir);
 402         }
 403
 404         dev_dbg(dev, "calling ir_raw_event_handle\n");
 405         ir_raw_event_handle(rr3->rc);
 406 }
 407
 408 /* Util fn to send rr3 cmds */
 409 static int redrat3_send_cmd(int cmd, struct redrat3_dev *rr3)
 410 {
 411         struct usb_device *udev;
 412         u8 *data;
 413         int res;
 414
 415         data = kzalloc(sizeof(u8), GFP_KERNEL);
 416         if (!data)
 417                 return -ENOMEM;
 418
 419         udev = rr3->udev;
 420         res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd,
 421                               USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 422                               0x0000, 0x0000, data, sizeof(u8), HZ * 10);
 423
 424         if (res < 0) {
 425                 dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d",
 426                         __func__, res, *data);
 427                 res = -EIO;
 428         } else
 429                 res = data[0];
 430
 431         kfree(data);
 432
 433         return res;
 434 }
 435
 436 /* Enables the long range detector and starts async receive */
 437 static int redrat3_enable_detector(struct redrat3_dev *rr3)
 438 {
 439         struct device *dev = rr3->dev;
 440         u8 ret;
 441
 442         ret = redrat3_send_cmd(RR3_RC_DET_ENABLE, rr3);
 443         if (ret != 0)
 444                 dev_dbg(dev, "%s: unexpected ret of %d\n",
 445                         __func__, ret);
 446
 447         ret = redrat3_send_cmd(RR3_RC_DET_STATUS, rr3);
 448         if (ret != 1) {
 449                 dev_err(dev, "%s: detector status: %d, should be 1\n",
 450                         __func__, ret);
 451                 return -EIO;
 452         }
 453
 454         redrat3_issue_async(rr3);
 455
 456         return 0;
 457 }
 458
 459 static inline void redrat3_delete(struct redrat3_dev *rr3,
 460                                   struct usb_device *udev)
 461 {
 462         usb_kill_urb(rr3->read_urb);
 463         usb_kill_urb(rr3->flash_urb);
 464         usb_free_urb(rr3->read_urb);
 465         usb_free_urb(rr3->flash_urb);
 466         usb_free_coherent(udev, le16_to_cpu(rr3->ep_in->wMaxPacketSize),
 467                           rr3->bulk_in_buf, rr3->dma_in);
 468
 469         kfree(rr3);
 470 }
 471
 472 static u32 redrat3_get_timeout(struct redrat3_dev *rr3)
 473 {
 474         __be32 *tmp;
 475         u32 timeout = MS_TO_US(150); /* a sane default, if things go haywire */
 476         int len, ret, pipe;
 477
 478         len = sizeof(*tmp);
 479         tmp = kzalloc(len, GFP_KERNEL);
 480         if (!tmp) {
 481                 dev_warn(rr3->dev, "Memory allocation faillure\n");
 482                 return timeout;
 483         }
 484
 485         pipe = usb_rcvctrlpipe(rr3->udev, 0);
 486         ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM,
 487                               USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 488                               RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5);
 489         if (ret != len)
 490                 dev_warn(rr3->dev, "Failed to read timeout from hardware\n");
 491         else {
 492                 timeout = redrat3_len_to_us(be32_to_cpup(tmp));
 493
 494                 dev_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000);
 495         }
 496
 497         kfree(tmp);
 498
 499         return timeout;
 500 }
 501
 502 static void redrat3_reset(struct redrat3_dev *rr3)
 503 {
 504         struct usb_device *udev = rr3->udev;
 505         struct device *dev = rr3->dev;
 506         int rc, rxpipe, txpipe;
 507         u8 *val;
 508         int len = sizeof(u8);
 509
 510         rxpipe = usb_rcvctrlpipe(udev, 0);
 511         txpipe = usb_sndctrlpipe(udev, 0);
 512
 513         val = kmalloc(len, GFP_KERNEL);
 514         if (!val) {
 515                 dev_err(dev, "Memory allocation failure\n");
 516                 return;
 517         }
 518
 519         *val = 0x01;
 520         rc = usb_control_msg(udev, rxpipe, RR3_RESET,
 521                              USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 522                              RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25);
 523         dev_dbg(dev, "reset returned 0x%02x\n", rc);
 524
 525         *val = 5;
 526         rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
 527                              USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
 528                              RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25);
 529         dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);
 530
 531         *val = RR3_DRIVER_MAXLENS;
 532         rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
 533                              USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
 534                              RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25);
 535         dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);
 536
 537         kfree(val);
 538 }
 539
 540 static void redrat3_get_firmware_rev(struct redrat3_dev *rr3)
 541 {
 542         int rc = 0;
 543         char *buffer;
 544
 545         buffer = kzalloc(sizeof(char) * (RR3_FW_VERSION_LEN + 1), GFP_KERNEL);
 546         if (!buffer) {
 547                 dev_err(rr3->dev, "Memory allocation failure\n");
 548                 return;
 549         }
 550
 551         rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0),
 552                              RR3_FW_VERSION,
 553                              USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 554                              0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5);
 555
 556         if (rc >= 0)
 557                 dev_info(rr3->dev, "Firmware rev: %s", buffer);
 558         else
 559                 dev_err(rr3->dev, "Problem fetching firmware ID\n");
 560
 561         kfree(buffer);
 562 }
 563
 564 static void redrat3_read_packet_start(struct redrat3_dev *rr3, unsigned len)
 565 {
 566         struct redrat3_header *header = rr3->bulk_in_buf;
 567         unsigned pktlen, pkttype;
 568
 569         /* grab the Length and type of transfer */
 570         pktlen = be16_to_cpu(header->length);
 571         pkttype = be16_to_cpu(header->transfer_type);
 572
 573         if (pktlen > sizeof(rr3->irdata)) {
 574                 dev_warn(rr3->dev, "packet length %u too large\n", pktlen);
 575                 return;
 576         }
 577
 578         switch (pkttype) {
 579         case RR3_ERROR:
 580                 if (len >= sizeof(struct redrat3_error)) {
 581                         struct redrat3_error *error = rr3->bulk_in_buf;
 582                         unsigned fw_error = be16_to_cpu(error->fw_error);
 583                         redrat3_dump_fw_error(rr3, fw_error);
 584                 }
 585                 break;
 586
 587         case RR3_MOD_SIGNAL_IN:
 588                 memcpy(&rr3->irdata, rr3->bulk_in_buf, len);
 589                 rr3->bytes_read = len;
 590                 dev_dbg(rr3->dev, "bytes_read %d, pktlen %d\n",
 591                         rr3->bytes_read, pktlen);
 592                 break;
 593
 594         default:
 595                 dev_dbg(rr3->dev, "ignoring packet with type 0x%02x, len of %d, 0x%02x\n",
 596                                                 pkttype, len, pktlen);
 597                 break;
 598         }
 599 }
 600
 601 static void redrat3_read_packet_continue(struct redrat3_dev *rr3, unsigned len)
 602 {
 603         void *irdata = &rr3->irdata;
 604
 605         if (len + rr3->bytes_read > sizeof(rr3->irdata)) {
 606                 dev_warn(rr3->dev, "too much data for packet\n");
 607                 rr3->bytes_read = 0;
 608                 return;
 609         }
 610
 611         memcpy(irdata + rr3->bytes_read, rr3->bulk_in_buf, len);
 612
 613         rr3->bytes_read += len;
 614         dev_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", rr3->bytes_read,
 615                                  be16_to_cpu(rr3->irdata.header.length));
 616 }
 617
 618 /* gather IR data from incoming urb, process it when we have enough */
 619 static int redrat3_get_ir_data(struct redrat3_dev *rr3, unsigned len)
 620 {
 621         struct device *dev = rr3->dev;
 622         unsigned pkttype;
 623         int ret = 0;
 624
 625         if (rr3->bytes_read == 0 && len >= sizeof(struct redrat3_header)) {
 626                 redrat3_read_packet_start(rr3, len);
 627         } else if (rr3->bytes_read != 0) {
 628                 redrat3_read_packet_continue(rr3, len);
 629         } else if (rr3->bytes_read == 0) {
 630                 dev_err(dev, "error: no packet data read\n");
 631                 ret = -ENODATA;
 632                 goto out;
 633         }
 634
 635         if (rr3->bytes_read < be16_to_cpu(rr3->irdata.header.length) +
 636                                                 sizeof(struct redrat3_header))
 637                 /* we're still accumulating data */
 638                 return 0;
 639
 640         /* if we get here, we've got IR data to decode */
 641         pkttype = be16_to_cpu(rr3->irdata.header.transfer_type);
 642         if (pkttype == RR3_MOD_SIGNAL_IN)
 643                 redrat3_process_ir_data(rr3);
 644         else
 645                 dev_dbg(dev, "discarding non-signal data packet (type 0x%02x)\n",
 646                                                                 pkttype);
 647
 648 out:
 649         rr3->bytes_read = 0;
 650         return ret;
 651 }
 652
 653 /* callback function from USB when async USB request has completed */
 654 static void redrat3_handle_async(struct urb *urb)
 655 {
 656         struct redrat3_dev *rr3;
 657         int ret;
 658
 659         if (!urb)
 660                 return;
 661
 662         rr3 = urb->context;
 663         if (!rr3) {
 664                 pr_err("%s called with invalid context!\n", __func__);
 665                 usb_unlink_urb(urb);
 666                 return;
 667         }
 668
 669         switch (urb->status) {
 670         case 0:
 671                 ret = redrat3_get_ir_data(rr3, urb->actual_length);
 672                 if (!ret) {
 673                         /* no error, prepare to read more */
 674                         redrat3_issue_async(rr3);
 675                 }
 676                 break;
 677
 678         case -ECONNRESET:
 679         case -ENOENT:
 680         case -ESHUTDOWN:
 681                 usb_unlink_urb(urb);
 682                 return;
 683
 684         case -EPIPE:
 685         default:
 686                 dev_warn(rr3->dev, "Error: urb status = %d\n", urb->status);
 687                 rr3->bytes_read = 0;
 688                 break;
 689         }
 690 }
 691
 692 static u16 mod_freq_to_val(unsigned int mod_freq)
 693 {
 694         int mult = 6000000;
 695
 696         /* Clk used in mod. freq. generation is CLK24/4. */
 697         return 65536 - (mult / mod_freq);
 698 }
 699
 700 static int redrat3_set_tx_carrier(struct rc_dev *rcdev, u32 carrier)
 701 {
 702         struct redrat3_dev *rr3 = rcdev->priv;
 703         struct device *dev = rr3->dev;
 704
 705         dev_dbg(dev, "Setting modulation frequency to %u", carrier);
 706         if (carrier == 0)
 707                 return -EINVAL;
 708
 709         rr3->carrier = carrier;
 710
 711         return carrier;
 712 }
 713
 714 static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf,
 715                                 unsigned count)
 716 {
 717         struct redrat3_dev *rr3 = rcdev->priv;
 718         struct device *dev = rr3->dev;
 719         struct redrat3_irdata *irdata = NULL;
 720         int ret, ret_len;
 721         int lencheck, cur_sample_len, pipe;
 722         int *sample_lens = NULL;
 723         u8 curlencheck = 0;
 724         unsigned i, sendbuf_len;
 725
 726         if (rr3->transmitting) {
 727                 dev_warn(dev, "%s: transmitter already in use\n", __func__);
 728                 return -EAGAIN;
 729         }
 730
 731         if (count > RR3_MAX_SIG_SIZE - RR3_TX_TRAILER_LEN)
 732                 return -EINVAL;
 733
 734         /* rr3 will disable rc detector on transmit */
 735         rr3->transmitting = true;
 736
 737         sample_lens = kzalloc(sizeof(int) * RR3_DRIVER_MAXLENS, GFP_KERNEL);
 738         if (!sample_lens) {
 739                 ret = -ENOMEM;
 740                 goto out;
 741         }
 742
 743         irdata = kzalloc(sizeof(*irdata), GFP_KERNEL);
 744         if (!irdata) {
 745                 ret = -ENOMEM;
 746                 goto out;
 747         }
 748
 749         for (i = 0; i < count; i++) {
 750                 cur_sample_len = redrat3_us_to_len(txbuf[i]);
 751                 if (cur_sample_len > 0xffff) {
 752                         dev_warn(dev, "transmit period of %uus truncated to %uus\n",
 753                                         txbuf[i], redrat3_len_to_us(0xffff));
 754                         cur_sample_len = 0xffff;
 755                 }
 756                 for (lencheck = 0; lencheck < curlencheck; lencheck++) {
 757                         if (sample_lens[lencheck] == cur_sample_len)
 758                                 break;
 759                 }
 760                 if (lencheck == curlencheck) {
 761                         dev_dbg(dev, "txbuf[%d]=%u, pos %d, enc %u\n",
 762                                 i, txbuf[i], curlencheck, cur_sample_len);
 763                         if (curlencheck < RR3_DRIVER_MAXLENS) {
 764                                 /* now convert the value to a proper
 765                                  * rr3 value.. */
 766                                 sample_lens[curlencheck] = cur_sample_len;
 767                                 put_unaligned_be16(cur_sample_len,
 768                                                 &irdata->lens[curlencheck]);
 769                                 curlencheck++;
 770                         } else {
 771                                 ret = -EINVAL;
 772                                 goto out;
 773                         }
 774                 }
 775                 irdata->sigdata[i] = lencheck;
 776         }
 777
 778         irdata->sigdata[count] = RR3_END_OF_SIGNAL;
 779         irdata->sigdata[count + 1] = RR3_END_OF_SIGNAL;
 780
 781         sendbuf_len = offsetof(struct redrat3_irdata,
 782                                         sigdata[count + RR3_TX_TRAILER_LEN]);
 783         /* fill in our packet header */
 784         irdata->header.length = cpu_to_be16(sendbuf_len -
 785                                                 sizeof(struct redrat3_header));
 786         irdata->header.transfer_type = cpu_to_be16(RR3_MOD_SIGNAL_OUT);
 787         irdata->pause = cpu_to_be32(redrat3_len_to_us(100));
 788         irdata->mod_freq_count = cpu_to_be16(mod_freq_to_val(rr3->carrier));
 789         irdata->no_lengths = curlencheck;
 790         irdata->sig_size = cpu_to_be16(count + RR3_TX_TRAILER_LEN);
 791
 792         pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress);
 793         ret = usb_bulk_msg(rr3->udev, pipe, irdata,
 794                             sendbuf_len, &ret_len, 10 * HZ);
 795         dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);
 796
 797         /* now tell the hardware to transmit what we sent it */
 798         pipe = usb_rcvctrlpipe(rr3->udev, 0);
 799         ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL,
 800                               USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 801                               0, 0, irdata, 2, HZ * 10);
 802
 803         if (ret < 0)
 804                 dev_err(dev, "Error: control msg send failed, rc %d\n", ret);
 805         else
 806                 ret = count;
 807
 808 out:
 809         kfree(sample_lens);
 810         kfree(irdata);
 811
 812         rr3->transmitting = false;
 813         /* rr3 re-enables rc detector because it was enabled before */
 814
 815         return ret;
 816 }
 817
 818 static void redrat3_brightness_set(struct led_classdev *led_dev, enum
 819                                                 led_brightness brightness)
 820 {
 821         struct redrat3_dev *rr3 = container_of(led_dev, struct redrat3_dev,
 822                                                                         led);
 823
 824         if (brightness != LED_OFF && atomic_cmpxchg(&rr3->flash, 0, 1) == 0) {
 825                 int ret = usb_submit_urb(rr3->flash_urb, GFP_ATOMIC);
 826                 if (ret != 0) {
 827                         dev_dbg(rr3->dev, "%s: unexpected ret of %d\n",
 828                                 __func__, ret);
 829                         atomic_set(&rr3->flash, 0);
 830                 }
 831         }
 832 }
 833
 834 static void redrat3_led_complete(struct urb *urb)
 835 {
 836         struct redrat3_dev *rr3 = urb->context;
 837
 838         switch (urb->status) {
 839         case 0:
 840                 break;
 841         case -ECONNRESET:
 842         case -ENOENT:
 843         case -ESHUTDOWN:
 844                 usb_unlink_urb(urb);
 845                 return;
 846         case -EPIPE:
 847         default:
 848                 dev_dbg(rr3->dev, "Error: urb status = %d\n", urb->status);
 849                 break;
 850         }
 851
 852         rr3->led.brightness = LED_OFF;
 853         atomic_dec(&rr3->flash);
 854 }
 855
 856 static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
 857 {
 858         struct device *dev = rr3->dev;
 859         struct rc_dev *rc;
 860         int ret = -ENODEV;
 861         u16 prod = le16_to_cpu(rr3->udev->descriptor.idProduct);
 862
 863         rc = rc_allocate_device();
 864         if (!rc) {
 865                 dev_err(dev, "remote input dev allocation failed\n");
 866                 goto out;
 867         }
 868
 869         snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s "
 870                  "Infrared Remote Transceiver (%04x:%04x)",
 871                  prod == USB_RR3IIUSB_PRODUCT_ID ? "-II" : "",
 872                  le16_to_cpu(rr3->udev->descriptor.idVendor), prod);
 873
 874         usb_make_path(rr3->udev, rr3->phys, sizeof(rr3->phys));
 875
 876         rc->input_name = rr3->name;
 877         rc->input_phys = rr3->phys;
 878         usb_to_input_id(rr3->udev, &rc->input_id);
 879         rc->dev.parent = dev;
 880         rc->priv = rr3;
 881         rc->driver_type = RC_DRIVER_IR_RAW;
 882         rc->allowed_protocols = RC_BIT_ALL;
 883         rc->timeout = US_TO_NS(2750);
 884         rc->tx_ir = redrat3_transmit_ir;
 885         rc->s_tx_carrier = redrat3_set_tx_carrier;
 886         rc->driver_name = DRIVER_NAME;
 887         rc->rx_resolution = US_TO_NS(2);
 888         rc->map_name = RC_MAP_HAUPPAUGE;
 889
 890         ret = rc_register_device(rc);
 891         if (ret < 0) {
 892                 dev_err(dev, "remote dev registration failed\n");
 893                 goto out;
 894         }
 895
 896         return rc;
 897
 898 out:
 899         rc_free_device(rc);
 900         return NULL;
 901 }
 902
 903 static int redrat3_dev_probe(struct usb_interface *intf,
 904                              const struct usb_device_id *id)
 905 {
 906         struct usb_device *udev = interface_to_usbdev(intf);
 907         struct device *dev = &intf->dev;
 908         struct usb_host_interface *uhi;
 909         struct redrat3_dev *rr3;
 910         struct usb_endpoint_descriptor *ep;
 911         struct usb_endpoint_descriptor *ep_in = NULL;
 912         struct usb_endpoint_descriptor *ep_out = NULL;
 913         u8 addr, attrs;
 914         int pipe, i;
 915         int retval = -ENOMEM;
 916
 917         uhi = intf->cur_altsetting;
 918
 919         /* find our bulk-in and bulk-out endpoints */
 920         for (i = 0; i < uhi->desc.bNumEndpoints; ++i) {
 921                 ep = &uhi->endpoint[i].desc;
 922                 addr = ep->bEndpointAddress;
 923                 attrs = ep->bmAttributes;
 924
 925                 if ((ep_in == NULL) &&
 926                     ((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) &&
 927                     ((attrs & USB_ENDPOINT_XFERTYPE_MASK) ==
 928                      USB_ENDPOINT_XFER_BULK)) {
 929                         dev_dbg(dev, "found bulk-in endpoint at 0x%02x\n",
 930                                 ep->bEndpointAddress);
 931                         /* data comes in on 0x82, 0x81 is for other data... */
 932                         if (ep->bEndpointAddress == RR3_BULK_IN_EP_ADDR)
 933                                 ep_in = ep;
 934                 }
 935
 936                 if ((ep_out == NULL) &&
 937                     ((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
 938                     ((attrs & USB_ENDPOINT_XFERTYPE_MASK) ==
 939                      USB_ENDPOINT_XFER_BULK)) {
 940                         dev_dbg(dev, "found bulk-out endpoint at 0x%02x\n",
 941                                 ep->bEndpointAddress);
 942                         ep_out = ep;
 943                 }
 944         }
 945
 946         if (!ep_in || !ep_out) {
 947                 dev_err(dev, "Couldn't find both in and out endpoints\n");
 948                 retval = -ENODEV;
 949                 goto no_endpoints;
 950         }
 951
 952         /* allocate memory for our device state and initialize it */
 953         rr3 = kzalloc(sizeof(*rr3), GFP_KERNEL);
 954         if (rr3 == NULL) {
 955                 dev_err(dev, "Memory allocation failure\n");
 956                 goto no_endpoints;
 957         }
 958
 959         rr3->dev = &intf->dev;
 960
 961         /* set up bulk-in endpoint */
 962         rr3->read_urb = usb_alloc_urb(0, GFP_KERNEL);
 963         if (!rr3->read_urb) {
 964                 dev_err(dev, "Read urb allocation failure\n");
 965                 goto error;
 966         }
 967
 968         rr3->ep_in = ep_in;
 969         rr3->bulk_in_buf = usb_alloc_coherent(udev,
 970                 le16_to_cpu(ep_in->wMaxPacketSize), GFP_KERNEL, &rr3->dma_in);
 971         if (!rr3->bulk_in_buf) {
 972                 dev_err(dev, "Read buffer allocation failure\n");
 973                 goto error;
 974         }
 975
 976         pipe = usb_rcvbulkpipe(udev, ep_in->bEndpointAddress);
 977         usb_fill_bulk_urb(rr3->read_urb, udev, pipe, rr3->bulk_in_buf,
 978                 le16_to_cpu(ep_in->wMaxPacketSize), redrat3_handle_async, rr3);
 979         rr3->read_urb->transfer_dma = rr3->dma_in;
 980         rr3->read_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 981
 982         rr3->ep_out = ep_out;
 983         rr3->udev = udev;
 984
 985         redrat3_reset(rr3);
 986         redrat3_get_firmware_rev(rr3);
 987
 988         /* might be all we need to do? */
 989         retval = redrat3_enable_detector(rr3);
 990         if (retval < 0)
 991                 goto error;
 992
 993         /* store current hardware timeout, in us, will use for kfifo resets */
 994         rr3->hw_timeout = redrat3_get_timeout(rr3);
 995
 996         /* default.. will get overridden by any sends with a freq defined */
 997         rr3->carrier = 38000;
 998
 999         /* led control */
1000         rr3->led.name = "redrat3:red:feedback";
1001         rr3->led.default_trigger = "rc-feedback";
1002         rr3->led.brightness_set = redrat3_brightness_set;
1003         retval = led_classdev_register(&intf->dev, &rr3->led);
1004         if (retval)
1005                 goto error;
1006
1007         atomic_set(&rr3->flash, 0);
1008         rr3->flash_urb = usb_alloc_urb(0, GFP_KERNEL);
1009         if (!rr3->flash_urb) {
1010                 retval = -ENOMEM;
1011                 goto led_free_error;
1012         }
1013
1014         /* setup packet is 'c0 b9 0000 0000 0001' */
1015         rr3->flash_control.bRequestType = 0xc0;
1016         rr3->flash_control.bRequest = RR3_BLINK_LED;
1017         rr3->flash_control.wLength = cpu_to_le16(1);
1018
1019         usb_fill_control_urb(rr3->flash_urb, udev, usb_rcvctrlpipe(udev, 0),
1020                         (unsigned char *)&rr3->flash_control,
1021                         &rr3->flash_in_buf, sizeof(rr3->flash_in_buf),
1022                         redrat3_led_complete, rr3);
1023
1024         rr3->rc = redrat3_init_rc_dev(rr3);
1025         if (!rr3->rc) {
1026                 retval = -ENOMEM;
1027                 goto led_free_error;
1028         }
1029         setup_timer(&rr3->rx_timeout, redrat3_rx_timeout, (unsigned long)rr3);
1030
1031         /* we can register the device now, as it is ready */
1032         usb_set_intfdata(intf, rr3);
1033
1034         return 0;
1035
1036 led_free_error:
1037         led_classdev_unregister(&rr3->led);
1038 error:
1039         redrat3_delete(rr3, rr3->udev);
1040
1041 no_endpoints:
1042         dev_err(dev, "%s: retval = %x", __func__, retval);
1043
1044         return retval;
1045 }
1046
1047 static void redrat3_dev_disconnect(struct usb_interface *intf)
1048 {
1049         struct usb_device *udev = interface_to_usbdev(intf);
1050         struct redrat3_dev *rr3 = usb_get_intfdata(intf);
1051
1052         if (!rr3)
1053                 return;
1054
1055         usb_set_intfdata(intf, NULL);
1056         rc_unregister_device(rr3->rc);
1057         led_classdev_unregister(&rr3->led);
1058         del_timer_sync(&rr3->rx_timeout);
1059         redrat3_delete(rr3, udev);
1060 }
1061
1062 static int redrat3_dev_suspend(struct usb_interface *intf, pm_message_t message)
1063 {
1064         struct redrat3_dev *rr3 = usb_get_intfdata(intf);
1065
1066         led_classdev_suspend(&rr3->led);
1067         usb_kill_urb(rr3->read_urb);
1068         usb_kill_urb(rr3->flash_urb);
1069         return 0;
1070 }
1071
1072 static int redrat3_dev_resume(struct usb_interface *intf)
1073 {
1074         struct redrat3_dev *rr3 = usb_get_intfdata(intf);
1075
1076         if (usb_submit_urb(rr3->read_urb, GFP_ATOMIC))
1077                 return -EIO;
1078         led_classdev_resume(&rr3->led);
1079         return 0;
1080 }
1081
1082 static struct usb_driver redrat3_dev_driver = {
1083         .name           = DRIVER_NAME,
1084         .probe          = redrat3_dev_probe,
1085         .disconnect     = redrat3_dev_disconnect,
1086         .suspend        = redrat3_dev_suspend,
1087         .resume         = redrat3_dev_resume,
1088         .reset_resume   = redrat3_dev_resume,
1089         .id_table       = redrat3_dev_table
1090 };
1091
1092 module_usb_driver(redrat3_dev_driver);
1093
1094 MODULE_DESCRIPTION(DRIVER_DESC);
1095 MODULE_AUTHOR(DRIVER_AUTHOR);
1096 MODULE_AUTHOR(DRIVER_AUTHOR2);
1097 MODULE_LICENSE("GPL");
1098 MODULE_DEVICE_TABLE(usb, redrat3_dev_table);