kernel/drivers/media/pci/cx23885/cx23885-dvb.c

   1 /*
   2  *  Driver for the Conexant CX23885 PCIe bridge
   3  *
   4  *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *
  15  *  GNU General Public License for more details.
  16  */
  17
  18 #include <linux/module.h>
  19 #include <linux/init.h>
  20 #include <linux/device.h>
  21 #include <linux/fs.h>
  22 #include <linux/kthread.h>
  23 #include <linux/file.h>
  24 #include <linux/suspend.h>
  25
  26 #include "cx23885.h"
  27 #include <media/v4l2-common.h>
  28
  29 #include "dvb_ca_en50221.h"
  30 #include "s5h1409.h"
  31 #include "s5h1411.h"
  32 #include "mt2131.h"
  33 #include "tda8290.h"
  34 #include "tda18271.h"
  35 #include "lgdt330x.h"
  36 #include "xc4000.h"
  37 #include "xc5000.h"
  38 #include "max2165.h"
  39 #include "tda10048.h"
  40 #include "tuner-xc2028.h"
  41 #include "tuner-simple.h"
  42 #include "dib7000p.h"
  43 #include "dib0070.h"
  44 #include "dibx000_common.h"
  45 #include "zl10353.h"
  46 #include "stv0900.h"
  47 #include "stv0900_reg.h"
  48 #include "stv6110.h"
  49 #include "lnbh24.h"
  50 #include "cx24116.h"
  51 #include "cx24117.h"
  52 #include "cimax2.h"
  53 #include "lgs8gxx.h"
  54 #include "netup-eeprom.h"
  55 #include "netup-init.h"
  56 #include "lgdt3305.h"
  57 #include "atbm8830.h"
  58 #include "ts2020.h"
  59 #include "ds3000.h"
  60 #include "cx23885-f300.h"
  61 #include "altera-ci.h"
  62 #include "stv0367.h"
  63 #include "drxk.h"
  64 #include "mt2063.h"
  65 #include "stv090x.h"
  66 #include "stb6100.h"
  67 #include "stb6100_cfg.h"
  68 #include "tda10071.h"
  69 #include "a8293.h"
  70 #include "mb86a20s.h"
  71 #include "si2165.h"
  72 #include "si2168.h"
  73 #include "si2157.h"
  74 #include "sp2.h"
  75 #include "m88ds3103.h"
  76 #include "m88rs6000t.h"
  77
  78 static unsigned int debug;
  79
  80 #define dprintk(level, fmt, arg...)\
  81         do { if (debug >= level)\
  82                 printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
  83         } while (0)
  84
  85 /* ------------------------------------------------------------------ */
  86
  87 static unsigned int alt_tuner;
  88 module_param(alt_tuner, int, 0644);
  89 MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
  90
  91 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  92
  93 /* ------------------------------------------------------------------ */
  94
  95 static int queue_setup(struct vb2_queue *q, const void *parg,
  96                            unsigned int *num_buffers, unsigned int *num_planes,
  97                            unsigned int sizes[], void *alloc_ctxs[])
  98 {
  99         struct cx23885_tsport *port = q->drv_priv;
 100
 101         port->ts_packet_size  = 188 * 4;
 102         port->ts_packet_count = 32;
 103         *num_planes = 1;
 104         sizes[0] = port->ts_packet_size * port->ts_packet_count;
 105         alloc_ctxs[0] = port->dev->alloc_ctx;
 106         *num_buffers = 32;
 107         return 0;
 108 }
 109
 110
 111 static int buffer_prepare(struct vb2_buffer *vb)
 112 {
 113         struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 114         struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
 115         struct cx23885_buffer *buf =
 116                 container_of(vbuf, struct cx23885_buffer, vb);
 117
 118         return cx23885_buf_prepare(buf, port);
 119 }
 120
 121 static void buffer_finish(struct vb2_buffer *vb)
 122 {
 123         struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 124         struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
 125         struct cx23885_dev *dev = port->dev;
 126         struct cx23885_buffer *buf = container_of(vbuf,
 127                 struct cx23885_buffer, vb);
 128
 129         cx23885_free_buffer(dev, buf);
 130 }
 131
 132 static void buffer_queue(struct vb2_buffer *vb)
 133 {
 134         struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 135         struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
 136         struct cx23885_buffer   *buf = container_of(vbuf,
 137                 struct cx23885_buffer, vb);
 138
 139         cx23885_buf_queue(port, buf);
 140 }
 141
 142 static void cx23885_dvb_gate_ctrl(struct cx23885_tsport  *port, int open)
 143 {
 144         struct vb2_dvb_frontends *f;
 145         struct vb2_dvb_frontend *fe;
 146
 147         f = &port->frontends;
 148
 149         if (f->gate <= 1) /* undefined or fe0 */
 150                 fe = vb2_dvb_get_frontend(f, 1);
 151         else
 152                 fe = vb2_dvb_get_frontend(f, f->gate);
 153
 154         if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
 155                 fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
 156 }
 157
 158 static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count)
 159 {
 160         struct cx23885_tsport *port = q->drv_priv;
 161         struct cx23885_dmaqueue *dmaq = &port->mpegq;
 162         struct cx23885_buffer *buf = list_entry(dmaq->active.next,
 163                         struct cx23885_buffer, queue);
 164
 165         cx23885_start_dma(port, dmaq, buf);
 166         return 0;
 167 }
 168
 169 static void cx23885_stop_streaming(struct vb2_queue *q)
 170 {
 171         struct cx23885_tsport *port = q->drv_priv;
 172
 173         cx23885_cancel_buffers(port);
 174 }
 175
 176 static struct vb2_ops dvb_qops = {
 177         .queue_setup    = queue_setup,
 178         .buf_prepare  = buffer_prepare,
 179         .buf_finish = buffer_finish,
 180         .buf_queue    = buffer_queue,
 181         .wait_prepare = vb2_ops_wait_prepare,
 182         .wait_finish = vb2_ops_wait_finish,
 183         .start_streaming = cx23885_start_streaming,
 184         .stop_streaming = cx23885_stop_streaming,
 185 };
 186
 187 static struct s5h1409_config hauppauge_generic_config = {
 188         .demod_address = 0x32 >> 1,
 189         .output_mode   = S5H1409_SERIAL_OUTPUT,
 190         .gpio          = S5H1409_GPIO_ON,
 191         .qam_if        = 44000,
 192         .inversion     = S5H1409_INVERSION_OFF,
 193         .status_mode   = S5H1409_DEMODLOCKING,
 194         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 195 };
 196
 197 static struct tda10048_config hauppauge_hvr1200_config = {
 198         .demod_address    = 0x10 >> 1,
 199         .output_mode      = TDA10048_SERIAL_OUTPUT,
 200         .fwbulkwritelen   = TDA10048_BULKWRITE_200,
 201         .inversion        = TDA10048_INVERSION_ON,
 202         .dtv6_if_freq_khz = TDA10048_IF_3300,
 203         .dtv7_if_freq_khz = TDA10048_IF_3800,
 204         .dtv8_if_freq_khz = TDA10048_IF_4300,
 205         .clk_freq_khz     = TDA10048_CLK_16000,
 206 };
 207
 208 static struct tda10048_config hauppauge_hvr1210_config = {
 209         .demod_address    = 0x10 >> 1,
 210         .output_mode      = TDA10048_SERIAL_OUTPUT,
 211         .fwbulkwritelen   = TDA10048_BULKWRITE_200,
 212         .inversion        = TDA10048_INVERSION_ON,
 213         .dtv6_if_freq_khz = TDA10048_IF_3300,
 214         .dtv7_if_freq_khz = TDA10048_IF_3500,
 215         .dtv8_if_freq_khz = TDA10048_IF_4000,
 216         .clk_freq_khz     = TDA10048_CLK_16000,
 217 };
 218
 219 static struct s5h1409_config hauppauge_ezqam_config = {
 220         .demod_address = 0x32 >> 1,
 221         .output_mode   = S5H1409_SERIAL_OUTPUT,
 222         .gpio          = S5H1409_GPIO_OFF,
 223         .qam_if        = 4000,
 224         .inversion     = S5H1409_INVERSION_ON,
 225         .status_mode   = S5H1409_DEMODLOCKING,
 226         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 227 };
 228
 229 static struct s5h1409_config hauppauge_hvr1800lp_config = {
 230         .demod_address = 0x32 >> 1,
 231         .output_mode   = S5H1409_SERIAL_OUTPUT,
 232         .gpio          = S5H1409_GPIO_OFF,
 233         .qam_if        = 44000,
 234         .inversion     = S5H1409_INVERSION_OFF,
 235         .status_mode   = S5H1409_DEMODLOCKING,
 236         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 237 };
 238
 239 static struct s5h1409_config hauppauge_hvr1500_config = {
 240         .demod_address = 0x32 >> 1,
 241         .output_mode   = S5H1409_SERIAL_OUTPUT,
 242         .gpio          = S5H1409_GPIO_OFF,
 243         .inversion     = S5H1409_INVERSION_OFF,
 244         .status_mode   = S5H1409_DEMODLOCKING,
 245         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 246 };
 247
 248 static struct mt2131_config hauppauge_generic_tunerconfig = {
 249         0x61
 250 };
 251
 252 static struct lgdt330x_config fusionhdtv_5_express = {
 253         .demod_address = 0x0e,
 254         .demod_chip = LGDT3303,
 255         .serial_mpeg = 0x40,
 256 };
 257
 258 static struct s5h1409_config hauppauge_hvr1500q_config = {
 259         .demod_address = 0x32 >> 1,
 260         .output_mode   = S5H1409_SERIAL_OUTPUT,
 261         .gpio          = S5H1409_GPIO_ON,
 262         .qam_if        = 44000,
 263         .inversion     = S5H1409_INVERSION_OFF,
 264         .status_mode   = S5H1409_DEMODLOCKING,
 265         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 266 };
 267
 268 static struct s5h1409_config dvico_s5h1409_config = {
 269         .demod_address = 0x32 >> 1,
 270         .output_mode   = S5H1409_SERIAL_OUTPUT,
 271         .gpio          = S5H1409_GPIO_ON,
 272         .qam_if        = 44000,
 273         .inversion     = S5H1409_INVERSION_OFF,
 274         .status_mode   = S5H1409_DEMODLOCKING,
 275         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 276 };
 277
 278 static struct s5h1411_config dvico_s5h1411_config = {
 279         .output_mode   = S5H1411_SERIAL_OUTPUT,
 280         .gpio          = S5H1411_GPIO_ON,
 281         .qam_if        = S5H1411_IF_44000,
 282         .vsb_if        = S5H1411_IF_44000,
 283         .inversion     = S5H1411_INVERSION_OFF,
 284         .status_mode   = S5H1411_DEMODLOCKING,
 285         .mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 286 };
 287
 288 static struct s5h1411_config hcw_s5h1411_config = {
 289         .output_mode   = S5H1411_SERIAL_OUTPUT,
 290         .gpio          = S5H1411_GPIO_OFF,
 291         .vsb_if        = S5H1411_IF_44000,
 292         .qam_if        = S5H1411_IF_4000,
 293         .inversion     = S5H1411_INVERSION_ON,
 294         .status_mode   = S5H1411_DEMODLOCKING,
 295         .mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 296 };
 297
 298 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
 299         .i2c_address      = 0x61,
 300         .if_khz           = 5380,
 301 };
 302
 303 static struct xc5000_config dvico_xc5000_tunerconfig = {
 304         .i2c_address      = 0x64,
 305         .if_khz           = 5380,
 306 };
 307
 308 static struct tda829x_config tda829x_no_probe = {
 309         .probe_tuner = TDA829X_DONT_PROBE,
 310 };
 311
 312 static struct tda18271_std_map hauppauge_tda18271_std_map = {
 313         .atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
 314                       .if_lvl = 6, .rfagc_top = 0x37 },
 315         .qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
 316                       .if_lvl = 6, .rfagc_top = 0x37 },
 317 };
 318
 319 static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
 320         .dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
 321                       .if_lvl = 1, .rfagc_top = 0x37, },
 322         .dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
 323                       .if_lvl = 1, .rfagc_top = 0x37, },
 324         .dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
 325                       .if_lvl = 1, .rfagc_top = 0x37, },
 326 };
 327
 328 static struct tda18271_config hauppauge_tda18271_config = {
 329         .std_map = &hauppauge_tda18271_std_map,
 330         .gate    = TDA18271_GATE_ANALOG,
 331         .output_opt = TDA18271_OUTPUT_LT_OFF,
 332 };
 333
 334 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
 335         .std_map = &hauppauge_hvr1200_tda18271_std_map,
 336         .gate    = TDA18271_GATE_ANALOG,
 337         .output_opt = TDA18271_OUTPUT_LT_OFF,
 338 };
 339
 340 static struct tda18271_config hauppauge_hvr1210_tuner_config = {
 341         .gate    = TDA18271_GATE_DIGITAL,
 342         .output_opt = TDA18271_OUTPUT_LT_OFF,
 343 };
 344
 345 static struct tda18271_config hauppauge_hvr4400_tuner_config = {
 346         .gate    = TDA18271_GATE_DIGITAL,
 347         .output_opt = TDA18271_OUTPUT_LT_OFF,
 348 };
 349
 350 static struct tda18271_std_map hauppauge_hvr127x_std_map = {
 351         .atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,
 352                       .if_lvl = 1, .rfagc_top = 0x58 },
 353         .qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 5,
 354                       .if_lvl = 1, .rfagc_top = 0x58 },
 355 };
 356
 357 static struct tda18271_config hauppauge_hvr127x_config = {
 358         .std_map = &hauppauge_hvr127x_std_map,
 359         .output_opt = TDA18271_OUTPUT_LT_OFF,
 360 };
 361
 362 static struct lgdt3305_config hauppauge_lgdt3305_config = {
 363         .i2c_addr           = 0x0e,
 364         .mpeg_mode          = LGDT3305_MPEG_SERIAL,
 365         .tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
 366         .tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,
 367         .deny_i2c_rptr      = 1,
 368         .spectral_inversion = 1,
 369         .qam_if_khz         = 4000,
 370         .vsb_if_khz         = 3250,
 371 };
 372
 373 static struct dibx000_agc_config xc3028_agc_config = {
 374         BAND_VHF | BAND_UHF,    /* band_caps */
 375
 376         /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
 377          * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
 378          * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
 379          * P_agc_nb_est=2, P_agc_write=0
 380          */
 381         (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
 382                 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
 383
 384         712,    /* inv_gain */
 385         21,     /* time_stabiliz */
 386
 387         0,      /* alpha_level */
 388         118,    /* thlock */
 389
 390         0,      /* wbd_inv */
 391         2867,   /* wbd_ref */
 392         0,      /* wbd_sel */
 393         2,      /* wbd_alpha */
 394
 395         0,      /* agc1_max */
 396         0,      /* agc1_min */
 397         39718,  /* agc2_max */
 398         9930,   /* agc2_min */
 399         0,      /* agc1_pt1 */
 400         0,      /* agc1_pt2 */
 401         0,      /* agc1_pt3 */
 402         0,      /* agc1_slope1 */
 403         0,      /* agc1_slope2 */
 404         0,      /* agc2_pt1 */
 405         128,    /* agc2_pt2 */
 406         29,     /* agc2_slope1 */
 407         29,     /* agc2_slope2 */
 408
 409         17,     /* alpha_mant */
 410         27,     /* alpha_exp */
 411         23,     /* beta_mant */
 412         51,     /* beta_exp */
 413
 414         1,      /* perform_agc_softsplit */
 415 };
 416
 417 /* PLL Configuration for COFDM BW_MHz = 8.000000
 418  * With external clock = 30.000000 */
 419 static struct dibx000_bandwidth_config xc3028_bw_config = {
 420         60000,  /* internal */
 421         30000,  /* sampling */
 422         1,      /* pll_cfg: prediv */
 423         8,      /* pll_cfg: ratio */
 424         3,      /* pll_cfg: range */
 425         1,      /* pll_cfg: reset */
 426         0,      /* pll_cfg: bypass */
 427         0,      /* misc: refdiv */
 428         0,      /* misc: bypclk_div */
 429         1,      /* misc: IO_CLK_en_core */
 430         1,      /* misc: ADClkSrc */
 431         0,      /* misc: modulo */
 432         (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
 433         (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
 434         20452225, /* timf */
 435         30000000  /* xtal_hz */
 436 };
 437
 438 static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
 439         .output_mpeg2_in_188_bytes = 1,
 440         .hostbus_diversity = 1,
 441         .tuner_is_baseband = 0,
 442         .update_lna  = NULL,
 443
 444         .agc_config_count = 1,
 445         .agc = &xc3028_agc_config,
 446         .bw  = &xc3028_bw_config,
 447
 448         .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
 449         .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
 450         .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
 451
 452         .pwm_freq_div = 0,
 453         .agc_control  = NULL,
 454         .spur_protect = 0,
 455
 456         .output_mode = OUTMODE_MPEG2_SERIAL,
 457 };
 458
 459 static struct zl10353_config dvico_fusionhdtv_xc3028 = {
 460         .demod_address = 0x0f,
 461         .if2           = 45600,
 462         .no_tuner      = 1,
 463         .disable_i2c_gate_ctrl = 1,
 464 };
 465
 466 static struct stv0900_reg stv0900_ts_regs[] = {
 467         { R0900_TSGENERAL, 0x00 },
 468         { R0900_P1_TSSPEED, 0x40 },
 469         { R0900_P2_TSSPEED, 0x40 },
 470         { R0900_P1_TSCFGM, 0xc0 },
 471         { R0900_P2_TSCFGM, 0xc0 },
 472         { R0900_P1_TSCFGH, 0xe0 },
 473         { R0900_P2_TSCFGH, 0xe0 },
 474         { R0900_P1_TSCFGL, 0x20 },
 475         { R0900_P2_TSCFGL, 0x20 },
 476         { 0xffff, 0xff }, /* terminate */
 477 };
 478
 479 static struct stv0900_config netup_stv0900_config = {
 480         .demod_address = 0x68,
 481         .demod_mode = 1, /* dual */
 482         .xtal = 8000000,
 483         .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
 484         .diseqc_mode = 2,/* 2/3 PWM */
 485         .ts_config_regs = stv0900_ts_regs,
 486         .tun1_maddress = 0,/* 0x60 */
 487         .tun2_maddress = 3,/* 0x63 */
 488         .tun1_adc = 1,/* 1 Vpp */
 489         .tun2_adc = 1,/* 1 Vpp */
 490 };
 491
 492 static struct stv6110_config netup_stv6110_tunerconfig_a = {
 493         .i2c_address = 0x60,
 494         .mclk = 16000000,
 495         .clk_div = 1,
 496         .gain = 8, /* +16 dB  - maximum gain */
 497 };
 498
 499 static struct stv6110_config netup_stv6110_tunerconfig_b = {
 500         .i2c_address = 0x63,
 501         .mclk = 16000000,
 502         .clk_div = 1,
 503         .gain = 8, /* +16 dB  - maximum gain */
 504 };
 505
 506 static struct cx24116_config tbs_cx24116_config = {
 507         .demod_address = 0x55,
 508 };
 509
 510 static struct cx24117_config tbs_cx24117_config = {
 511         .demod_address = 0x55,
 512 };
 513
 514 static struct ds3000_config tevii_ds3000_config = {
 515         .demod_address = 0x68,
 516 };
 517
 518 static struct ts2020_config tevii_ts2020_config  = {
 519         .tuner_address = 0x60,
 520         .clk_out_div = 1,
 521         .frequency_div = 1146000,
 522 };
 523
 524 static struct cx24116_config dvbworld_cx24116_config = {
 525         .demod_address = 0x05,
 526 };
 527
 528 static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
 529         .prod = LGS8GXX_PROD_LGS8GL5,
 530         .demod_address = 0x19,
 531         .serial_ts = 0,
 532         .ts_clk_pol = 1,
 533         .ts_clk_gated = 1,
 534         .if_clk_freq = 30400, /* 30.4 MHz */
 535         .if_freq = 5380, /* 5.38 MHz */
 536         .if_neg_center = 1,
 537         .ext_adc = 0,
 538         .adc_signed = 0,
 539         .if_neg_edge = 0,
 540 };
 541
 542 static struct xc5000_config mygica_x8506_xc5000_config = {
 543         .i2c_address = 0x61,
 544         .if_khz = 5380,
 545 };
 546
 547 static struct mb86a20s_config mygica_x8507_mb86a20s_config = {
 548         .demod_address = 0x10,
 549 };
 550
 551 static struct xc5000_config mygica_x8507_xc5000_config = {
 552         .i2c_address = 0x61,
 553         .if_khz = 4000,
 554 };
 555
 556 static struct stv090x_config prof_8000_stv090x_config = {
 557         .device                 = STV0903,
 558         .demod_mode             = STV090x_SINGLE,
 559         .clk_mode               = STV090x_CLK_EXT,
 560         .xtal                   = 27000000,
 561         .address                = 0x6A,
 562         .ts1_mode               = STV090x_TSMODE_PARALLEL_PUNCTURED,
 563         .repeater_level         = STV090x_RPTLEVEL_64,
 564         .adc1_range             = STV090x_ADC_2Vpp,
 565         .diseqc_envelope_mode   = false,
 566
 567         .tuner_get_frequency    = stb6100_get_frequency,
 568         .tuner_set_frequency    = stb6100_set_frequency,
 569         .tuner_set_bandwidth    = stb6100_set_bandwidth,
 570         .tuner_get_bandwidth    = stb6100_get_bandwidth,
 571 };
 572
 573 static struct stb6100_config prof_8000_stb6100_config = {
 574         .tuner_address = 0x60,
 575         .refclock = 27000000,
 576 };
 577
 578 static int p8000_set_voltage(struct dvb_frontend *fe,
 579                              enum fe_sec_voltage voltage)
 580 {
 581         struct cx23885_tsport *port = fe->dvb->priv;
 582         struct cx23885_dev *dev = port->dev;
 583
 584         if (voltage == SEC_VOLTAGE_18)
 585                 cx_write(MC417_RWD, 0x00001e00);
 586         else if (voltage == SEC_VOLTAGE_13)
 587                 cx_write(MC417_RWD, 0x00001a00);
 588         else
 589                 cx_write(MC417_RWD, 0x00001800);
 590         return 0;
 591 }
 592
 593 static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
 594                                         enum fe_sec_voltage voltage)
 595 {
 596         struct cx23885_tsport *port = fe->dvb->priv;
 597         struct cx23885_dev *dev = port->dev;
 598
 599         cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
 600
 601         switch (voltage) {
 602         case SEC_VOLTAGE_13:
 603                 cx23885_gpio_set(dev, GPIO_1);
 604                 cx23885_gpio_clear(dev, GPIO_0);
 605                 break;
 606         case SEC_VOLTAGE_18:
 607                 cx23885_gpio_set(dev, GPIO_1);
 608                 cx23885_gpio_set(dev, GPIO_0);
 609                 break;
 610         case SEC_VOLTAGE_OFF:
 611                 cx23885_gpio_clear(dev, GPIO_1);
 612                 cx23885_gpio_clear(dev, GPIO_0);
 613                 break;
 614         }
 615
 616         /* call the frontend set_voltage function */
 617         port->fe_set_voltage(fe, voltage);
 618
 619         return 0;
 620 }
 621
 622 static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
 623                                         enum fe_sec_voltage voltage)
 624 {
 625         struct cx23885_tsport *port = fe->dvb->priv;
 626         struct cx23885_dev *dev = port->dev;
 627
 628         cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
 629
 630         switch (voltage) {
 631         case SEC_VOLTAGE_13:
 632                 cx23885_gpio_set(dev, GPIO_13);
 633                 cx23885_gpio_clear(dev, GPIO_12);
 634                 break;
 635         case SEC_VOLTAGE_18:
 636                 cx23885_gpio_set(dev, GPIO_13);
 637                 cx23885_gpio_set(dev, GPIO_12);
 638                 break;
 639         case SEC_VOLTAGE_OFF:
 640                 cx23885_gpio_clear(dev, GPIO_13);
 641                 cx23885_gpio_clear(dev, GPIO_12);
 642                 break;
 643         }
 644         /* call the frontend set_voltage function */
 645         return port->fe_set_voltage(fe, voltage);
 646 }
 647
 648 static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
 649                                 u8 data, int *mem)
 650 {
 651         /* MC417 */
 652         #define SP2_DATA              0x000000ff
 653         #define SP2_WR                0x00008000
 654         #define SP2_RD                0x00004000
 655         #define SP2_ACK               0x00001000
 656         #define SP2_ADHI              0x00000800
 657         #define SP2_ADLO              0x00000400
 658         #define SP2_CS1               0x00000200
 659         #define SP2_CS0               0x00000100
 660         #define SP2_EN_ALL            0x00001000
 661         #define SP2_CTRL_OFF          (SP2_CS1 | SP2_CS0 | SP2_WR | SP2_RD)
 662
 663         struct cx23885_tsport *port = priv;
 664         struct cx23885_dev *dev = port->dev;
 665         int ret;
 666         int tmp = 0;
 667         unsigned long timeout;
 668
 669         mutex_lock(&dev->gpio_lock);
 670
 671         /* write addr */
 672         cx_write(MC417_OEN, SP2_EN_ALL);
 673         cx_write(MC417_RWD, SP2_CTRL_OFF |
 674                                 SP2_ADLO | (0xff & addr));
 675         cx_clear(MC417_RWD, SP2_ADLO);
 676         cx_write(MC417_RWD, SP2_CTRL_OFF |
 677                                 SP2_ADHI | (0xff & (addr >> 8)));
 678         cx_clear(MC417_RWD, SP2_ADHI);
 679
 680         if (read)
 681                 /* data in */
 682                 cx_write(MC417_OEN, SP2_EN_ALL | SP2_DATA);
 683         else
 684                 /* data out */
 685                 cx_write(MC417_RWD, SP2_CTRL_OFF | data);
 686
 687         /* chip select 0 */
 688         cx_clear(MC417_RWD, SP2_CS0);
 689
 690         /* read/write */
 691         cx_clear(MC417_RWD, (read) ? SP2_RD : SP2_WR);
 692
 693         /* wait for a maximum of 1 msec */
 694         timeout = jiffies + msecs_to_jiffies(1);
 695         while (!time_after(jiffies, timeout)) {
 696                 tmp = cx_read(MC417_RWD);
 697                 if ((tmp & SP2_ACK) == 0)
 698                         break;
 699                 usleep_range(50, 100);
 700         }
 701
 702         cx_set(MC417_RWD, SP2_CTRL_OFF);
 703         *mem = tmp & 0xff;
 704
 705         mutex_unlock(&dev->gpio_lock);
 706
 707         if (!read) {
 708                 if (*mem < 0) {
 709                         ret = -EREMOTEIO;
 710                         goto err;
 711                 }
 712         }
 713
 714         return 0;
 715 err:
 716         return ret;
 717 }
 718
 719 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
 720 {
 721         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 722         struct cx23885_tsport *port = fe->dvb->priv;
 723         struct cx23885_dev *dev = port->dev;
 724
 725         switch (dev->board) {
 726         case CX23885_BOARD_HAUPPAUGE_HVR1275:
 727                 switch (p->modulation) {
 728                 case VSB_8:
 729                         cx23885_gpio_clear(dev, GPIO_5);
 730                         break;
 731                 case QAM_64:
 732                 case QAM_256:
 733                 default:
 734                         cx23885_gpio_set(dev, GPIO_5);
 735                         break;
 736                 }
 737                 break;
 738         case CX23885_BOARD_MYGICA_X8506:
 739         case CX23885_BOARD_MYGICA_X8507:
 740         case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 741                 /* Select Digital TV */
 742                 cx23885_gpio_set(dev, GPIO_0);
 743                 break;
 744         }
 745
 746         /* Call the real set_frontend */
 747         if (port->set_frontend)
 748                 return port->set_frontend(fe);
 749
 750         return 0;
 751 }
 752
 753 static void cx23885_set_frontend_hook(struct cx23885_tsport *port,
 754                                      struct dvb_frontend *fe)
 755 {
 756         port->set_frontend = fe->ops.set_frontend;
 757         fe->ops.set_frontend = cx23885_dvb_set_frontend;
 758 }
 759
 760 static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
 761         .prod = LGS8GXX_PROD_LGS8G75,
 762         .demod_address = 0x19,
 763         .serial_ts = 0,
 764         .ts_clk_pol = 1,
 765         .ts_clk_gated = 1,
 766         .if_clk_freq = 30400, /* 30.4 MHz */
 767         .if_freq = 6500, /* 6.50 MHz */
 768         .if_neg_center = 1,
 769         .ext_adc = 0,
 770         .adc_signed = 1,
 771         .adc_vpp = 2, /* 1.6 Vpp */
 772         .if_neg_edge = 1,
 773 };
 774
 775 static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
 776         .i2c_address = 0x61,
 777         .if_khz = 6500,
 778 };
 779
 780 static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
 781         .prod = ATBM8830_PROD_8830,
 782         .demod_address = 0x44,
 783         .serial_ts = 0,
 784         .ts_sampling_edge = 1,
 785         .ts_clk_gated = 0,
 786         .osc_clk_freq = 30400, /* in kHz */
 787         .if_freq = 0, /* zero IF */
 788         .zif_swap_iq = 1,
 789         .agc_min = 0x2E,
 790         .agc_max = 0xFF,
 791         .agc_hold_loop = 0,
 792 };
 793
 794 static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
 795         .i2c_address = 0x60,
 796         .osc_clk = 20
 797 };
 798
 799 static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
 800         .prod = ATBM8830_PROD_8830,
 801         .demod_address = 0x44,
 802         .serial_ts = 1,
 803         .ts_sampling_edge = 1,
 804         .ts_clk_gated = 0,
 805         .osc_clk_freq = 30400, /* in kHz */
 806         .if_freq = 0, /* zero IF */
 807         .zif_swap_iq = 1,
 808         .agc_min = 0x2E,
 809         .agc_max = 0xFF,
 810         .agc_hold_loop = 0,
 811 };
 812
 813 static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
 814         .i2c_address = 0x60,
 815         .osc_clk = 20
 816 };
 817 static struct stv0367_config netup_stv0367_config[] = {
 818         {
 819                 .demod_address = 0x1c,
 820                 .xtal = 27000000,
 821                 .if_khz = 4500,
 822                 .if_iq_mode = 0,
 823                 .ts_mode = 1,
 824                 .clk_pol = 0,
 825         }, {
 826                 .demod_address = 0x1d,
 827                 .xtal = 27000000,
 828                 .if_khz = 4500,
 829                 .if_iq_mode = 0,
 830                 .ts_mode = 1,
 831                 .clk_pol = 0,
 832         },
 833 };
 834
 835 static struct xc5000_config netup_xc5000_config[] = {
 836         {
 837                 .i2c_address = 0x61,
 838                 .if_khz = 4500,
 839         }, {
 840                 .i2c_address = 0x64,
 841                 .if_khz = 4500,
 842         },
 843 };
 844
 845 static struct drxk_config terratec_drxk_config[] = {
 846         {
 847                 .adr = 0x29,
 848                 .no_i2c_bridge = 1,
 849         }, {
 850                 .adr = 0x2a,
 851                 .no_i2c_bridge = 1,
 852         },
 853 };
 854
 855 static struct mt2063_config terratec_mt2063_config[] = {
 856         {
 857                 .tuner_address = 0x60,
 858         }, {
 859                 .tuner_address = 0x67,
 860         },
 861 };
 862
 863 static const struct tda10071_platform_data hauppauge_tda10071_pdata = {
 864         .clk = 40444000, /* 40.444 MHz */
 865         .i2c_wr_max = 64,
 866         .ts_mode = TDA10071_TS_SERIAL,
 867         .pll_multiplier = 20,
 868         .tuner_i2c_addr = 0x54,
 869 };
 870
 871 static const struct si2165_config hauppauge_hvr4400_si2165_config = {
 872         .i2c_addr       = 0x64,
 873         .chip_mode      = SI2165_MODE_PLL_XTAL,
 874         .ref_freq_Hz    = 16000000,
 875 };
 876
 877 static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = {
 878         .i2c_addr = 0x68,
 879         .clock = 27000000,
 880         .i2c_wr_max = 33,
 881         .clock_out = 0,
 882         .ts_mode = M88DS3103_TS_PARALLEL,
 883         .ts_clk = 16000,
 884         .ts_clk_pol = 1,
 885         .lnb_en_pol = 1,
 886         .lnb_hv_pol = 0,
 887         .agc = 0x99,
 888 };
 889
 890 static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
 891         .i2c_addr = 0x68,
 892         .clock = 27000000,
 893         .i2c_wr_max = 33,
 894         .clock_out = 0,
 895         .ts_mode = M88DS3103_TS_CI,
 896         .ts_clk = 10000,
 897         .ts_clk_pol = 1,
 898         .lnb_en_pol = 1,
 899         .lnb_hv_pol = 0,
 900         .agc = 0x99,
 901 };
 902
 903 static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
 904         .i2c_addr = 0x68,
 905         .clock = 27000000,
 906         .i2c_wr_max = 33,
 907         .clock_out = 0,
 908         .ts_mode = M88DS3103_TS_SERIAL,
 909         .ts_clk = 96000,
 910         .ts_clk_pol = 0,
 911         .lnb_en_pol = 1,
 912         .lnb_hv_pol = 0,
 913         .agc = 0x99,
 914 };
 915
 916 static const struct m88ds3103_config hauppauge_hvr5525_m88ds3103_config = {
 917         .i2c_addr = 0x69,
 918         .clock = 27000000,
 919         .i2c_wr_max = 33,
 920         .ts_mode = M88DS3103_TS_PARALLEL,
 921         .ts_clk = 16000,
 922         .ts_clk_pol = 1,
 923         .agc = 0x99,
 924 };
 925
 926 static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
 927 {
 928         struct cx23885_dev *dev = (struct cx23885_dev *)device;
 929         unsigned long timeout = jiffies + msecs_to_jiffies(1);
 930         uint32_t mem = 0;
 931
 932         mem = cx_read(MC417_RWD);
 933         if (read)
 934                 cx_set(MC417_OEN, ALT_DATA);
 935         else {
 936                 cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */
 937                 mem &= ~ALT_DATA;
 938                 mem |= (data & ALT_DATA);
 939         }
 940
 941         if (flag)
 942                 mem |= ALT_AD_RG;
 943         else
 944                 mem &= ~ALT_AD_RG;
 945
 946         mem &= ~ALT_CS;
 947         if (read)
 948                 mem = (mem & ~ALT_RD) | ALT_WR;
 949         else
 950                 mem = (mem & ~ALT_WR) | ALT_RD;
 951
 952         cx_write(MC417_RWD, mem);  /* start RW cycle */
 953
 954         for (;;) {
 955                 mem = cx_read(MC417_RWD);
 956                 if ((mem & ALT_RDY) == 0)
 957                         break;
 958                 if (time_after(jiffies, timeout))
 959                         break;
 960                 udelay(1);
 961         }
 962
 963         cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
 964         if (read)
 965                 return mem & ALT_DATA;
 966
 967         return 0;
 968 };
 969
 970 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
 971 {
 972         struct dib7000p_ops *dib7000p_ops = fe->sec_priv;
 973
 974         return dib7000p_ops->set_gpio(fe, 8, 0, !onoff);
 975 }
 976
 977 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
 978 {
 979         return 0;
 980 }
 981
 982 static struct dib0070_config dib7070p_dib0070_config = {
 983         .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
 984         .reset = dib7070_tuner_reset,
 985         .sleep = dib7070_tuner_sleep,
 986         .clock_khz = 12000,
 987         .freq_offset_khz_vhf = 550,
 988         /* .flip_chip = 1, */
 989 };
 990
 991 /* DIB7070 generic */
 992 static struct dibx000_agc_config dib7070_agc_config = {
 993         .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
 994
 995         /*
 996          * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5,
 997          * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
 998          * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0
 999          */
1000         .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) |
1001                  (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1002         .inv_gain = 600,
1003         .time_stabiliz = 10,
1004         .alpha_level = 0,
1005         .thlock = 118,
1006         .wbd_inv = 0,
1007         .wbd_ref = 3530,
1008         .wbd_sel = 1,
1009         .wbd_alpha = 5,
1010         .agc1_max = 65535,
1011         .agc1_min = 0,
1012         .agc2_max = 65535,
1013         .agc2_min = 0,
1014         .agc1_pt1 = 0,
1015         .agc1_pt2 = 40,
1016         .agc1_pt3 = 183,
1017         .agc1_slope1 = 206,
1018         .agc1_slope2 = 255,
1019         .agc2_pt1 = 72,
1020         .agc2_pt2 = 152,
1021         .agc2_slope1 = 88,
1022         .agc2_slope2 = 90,
1023         .alpha_mant = 17,
1024         .alpha_exp = 27,
1025         .beta_mant = 23,
1026         .beta_exp = 51,
1027         .perform_agc_softsplit = 0,
1028 };
1029
1030 static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
1031         .internal = 60000,
1032         .sampling = 15000,
1033         .pll_prediv = 1,
1034         .pll_ratio = 20,
1035         .pll_range = 3,
1036         .pll_reset = 1,
1037         .pll_bypass = 0,
1038         .enable_refdiv = 0,
1039         .bypclk_div = 0,
1040         .IO_CLK_en_core = 1,
1041         .ADClkSrc = 1,
1042         .modulo = 2,
1043         /* refsel, sel, freq_15k */
1044         .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
1045         .ifreq = (0 << 25) | 0,
1046         .timf = 20452225,
1047         .xtal_hz = 12000000,
1048 };
1049
1050 static struct dib7000p_config dib7070p_dib7000p_config = {
1051         /* .output_mode = OUTMODE_MPEG2_FIFO, */
1052         .output_mode = OUTMODE_MPEG2_SERIAL,
1053         /* .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, */
1054         .output_mpeg2_in_188_bytes = 1,
1055
1056         .agc_config_count = 1,
1057         .agc = &dib7070_agc_config,
1058         .bw  = &dib7070_bw_config_12_mhz,
1059         .tuner_is_baseband = 1,
1060         .spur_protect = 1,
1061
1062         .gpio_dir = 0xfcef, /* DIB7000P_GPIO_DEFAULT_DIRECTIONS, */
1063         .gpio_val = 0x0110, /* DIB7000P_GPIO_DEFAULT_VALUES, */
1064         .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1065
1066         .hostbus_diversity = 1,
1067 };
1068
1069 static int dvb_register_ci_mac(struct cx23885_tsport *port)
1070 {
1071         struct cx23885_dev *dev = port->dev;
1072         struct i2c_client *client_ci = NULL;
1073         struct vb2_dvb_frontend *fe0;
1074
1075         fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
1076         if (!fe0)
1077                 return -EINVAL;
1078
1079         switch (dev->board) {
1080         case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
1081                 static struct netup_card_info cinfo;
1082
1083                 netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
1084                 memcpy(port->frontends.adapter.proposed_mac,
1085                                 cinfo.port[port->nr - 1].mac, 6);
1086                 printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
1087                         port->nr, port->frontends.adapter.proposed_mac);
1088
1089                 netup_ci_init(port);
1090                 return 0;
1091                 }
1092         case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
1093                 struct altera_ci_config netup_ci_cfg = {
1094                         .dev = dev,/* magic number to identify*/
1095                         .adapter = &port->frontends.adapter,/* for CI */
1096                         .demux = &fe0->dvb.demux,/* for hw pid filter */
1097                         .fpga_rw = netup_altera_fpga_rw,
1098                 };
1099
1100                 altera_ci_init(&netup_ci_cfg, port->nr);
1101                 return 0;
1102                 }
1103         case CX23885_BOARD_TEVII_S470: {
1104                 u8 eeprom[256]; /* 24C02 i2c eeprom */
1105
1106                 if (port->nr != 1)
1107                         return 0;
1108
1109                 /* Read entire EEPROM */
1110                 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
1111                 tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
1112                 printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0);
1113                 memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
1114                 return 0;
1115                 }
1116         case CX23885_BOARD_DVBSKY_T9580:
1117         case CX23885_BOARD_DVBSKY_S950:
1118         case CX23885_BOARD_DVBSKY_S952:
1119         case CX23885_BOARD_DVBSKY_T982: {
1120                 u8 eeprom[256]; /* 24C02 i2c eeprom */
1121
1122                 if (port->nr > 2)
1123                         return 0;
1124
1125                 /* Read entire EEPROM */
1126                 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
1127                 tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
1128                                 sizeof(eeprom));
1129                 printk(KERN_INFO "%s port %d MAC address: %pM\n",
1130                         cx23885_boards[dev->board].name, port->nr,
1131                         eeprom + 0xc0 + (port->nr-1) * 8);
1132                 memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +
1133                         (port->nr-1) * 8, 6);
1134                 return 0;
1135                 }
1136         case CX23885_BOARD_DVBSKY_S950C:
1137         case CX23885_BOARD_DVBSKY_T980C:
1138         case CX23885_BOARD_TT_CT2_4500_CI: {
1139                 u8 eeprom[256]; /* 24C02 i2c eeprom */
1140                 struct sp2_config sp2_config;
1141                 struct i2c_board_info info;
1142                 struct cx23885_i2c *i2c_bus2 = &dev->i2c_bus[1];
1143
1144                 /* attach CI */
1145                 memset(&sp2_config, 0, sizeof(sp2_config));
1146                 sp2_config.dvb_adap = &port->frontends.adapter;
1147                 sp2_config.priv = port;
1148                 sp2_config.ci_control = cx23885_sp2_ci_ctrl;
1149                 memset(&info, 0, sizeof(struct i2c_board_info));
1150                 strlcpy(info.type, "sp2", I2C_NAME_SIZE);
1151                 info.addr = 0x40;
1152                 info.platform_data = &sp2_config;
1153                 request_module(info.type);
1154                 client_ci = i2c_new_device(&i2c_bus2->i2c_adap, &info);
1155                 if (client_ci == NULL || client_ci->dev.driver == NULL)
1156                         return -ENODEV;
1157                 if (!try_module_get(client_ci->dev.driver->owner)) {
1158                         i2c_unregister_device(client_ci);
1159                         return -ENODEV;
1160                 }
1161                 port->i2c_client_ci = client_ci;
1162
1163                 if (port->nr != 1)
1164                         return 0;
1165
1166                 /* Read entire EEPROM */
1167                 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
1168                 tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
1169                                 sizeof(eeprom));
1170                 printk(KERN_INFO "%s MAC address: %pM\n",
1171                         cx23885_boards[dev->board].name, eeprom + 0xc0);
1172                 memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6);
1173                 return 0;
1174                 }
1175         }
1176         return 0;
1177 }
1178
1179 static int dvb_register(struct cx23885_tsport *port)
1180 {
1181         struct dib7000p_ops dib7000p_ops;
1182         struct cx23885_dev *dev = port->dev;
1183         struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
1184         struct vb2_dvb_frontend *fe0, *fe1 = NULL;
1185         struct si2168_config si2168_config;
1186         struct si2157_config si2157_config;
1187         struct ts2020_config ts2020_config;
1188         struct i2c_board_info info;
1189         struct i2c_adapter *adapter;
1190         struct i2c_client *client_demod = NULL, *client_tuner = NULL;
1191         struct i2c_client *client_sec = NULL;
1192         const struct m88ds3103_config *p_m88ds3103_config = NULL;
1193         int (*p_set_voltage)(struct dvb_frontend *fe,
1194                              enum fe_sec_voltage voltage) = NULL;
1195         int mfe_shared = 0; /* bus not shared by default */
1196         int ret;
1197
1198         /* Get the first frontend */
1199         fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
1200         if (!fe0)
1201                 return -EINVAL;
1202
1203         /* init struct vb2_dvb */
1204         fe0->dvb.name = dev->name;
1205
1206         /* multi-frontend gate control is undefined or defaults to fe0 */
1207         port->frontends.gate = 0;
1208
1209         /* Sets the gate control callback to be used by i2c command calls */
1210         port->gate_ctrl = cx23885_dvb_gate_ctrl;
1211
1212         /* init frontend */
1213         switch (dev->board) {
1214         case CX23885_BOARD_HAUPPAUGE_HVR1250:
1215                 i2c_bus = &dev->i2c_bus[0];
1216                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
1217                                                 &hauppauge_generic_config,
1218                                                 &i2c_bus->i2c_adap);
1219                 if (fe0->dvb.frontend == NULL)
1220                         break;
1221                 dvb_attach(mt2131_attach, fe0->dvb.frontend,
1222                            &i2c_bus->i2c_adap,
1223                            &hauppauge_generic_tunerconfig, 0);
1224                 break;
1225         case CX23885_BOARD_HAUPPAUGE_HVR1270:
1226         case CX23885_BOARD_HAUPPAUGE_HVR1275:
1227                 i2c_bus = &dev->i2c_bus[0];
1228                 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
1229                                                &hauppauge_lgdt3305_config,
1230                                                &i2c_bus->i2c_adap);
1231                 if (fe0->dvb.frontend == NULL)
1232                         break;
1233                 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1234                            0x60, &dev->i2c_bus[1].i2c_adap,
1235                            &hauppauge_hvr127x_config);
1236                 if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1275)
1237                         cx23885_set_frontend_hook(port, fe0->dvb.frontend);
1238                 break;
1239         case CX23885_BOARD_HAUPPAUGE_HVR1255:
1240         case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
1241                 i2c_bus = &dev->i2c_bus[0];
1242                 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1243                                                &hcw_s5h1411_config,
1244                                                &i2c_bus->i2c_adap);
1245                 if (fe0->dvb.frontend == NULL)
1246                         break;
1247
1248                 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1249                            0x60, &dev->i2c_bus[1].i2c_adap,
1250                            &hauppauge_tda18271_config);
1251
1252                 tda18271_attach(&dev->ts1.analog_fe,
1253                         0x60, &dev->i2c_bus[1].i2c_adap,
1254                         &hauppauge_tda18271_config);
1255
1256                 break;
1257         case CX23885_BOARD_HAUPPAUGE_HVR1800:
1258                 i2c_bus = &dev->i2c_bus[0];
1259                 switch (alt_tuner) {
1260                 case 1:
1261                         fe0->dvb.frontend =
1262                                 dvb_attach(s5h1409_attach,
1263                                            &hauppauge_ezqam_config,
1264                                            &i2c_bus->i2c_adap);
1265                         if (fe0->dvb.frontend == NULL)
1266                                 break;
1267
1268                         dvb_attach(tda829x_attach, fe0->dvb.frontend,
1269                                    &dev->i2c_bus[1].i2c_adap, 0x42,
1270                                    &tda829x_no_probe);
1271                         dvb_attach(tda18271_attach, fe0->dvb.frontend,
1272                                    0x60, &dev->i2c_bus[1].i2c_adap,
1273                                    &hauppauge_tda18271_config);
1274                         break;
1275                 case 0:
1276                 default:
1277                         fe0->dvb.frontend =
1278                                 dvb_attach(s5h1409_attach,
1279                                            &hauppauge_generic_config,
1280                                            &i2c_bus->i2c_adap);
1281                         if (fe0->dvb.frontend == NULL)
1282                                 break;
1283                         dvb_attach(mt2131_attach, fe0->dvb.frontend,
1284                                    &i2c_bus->i2c_adap,
1285                                    &hauppauge_generic_tunerconfig, 0);
1286                 }
1287                 break;
1288         case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
1289                 i2c_bus = &dev->i2c_bus[0];
1290                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
1291                                                 &hauppauge_hvr1800lp_config,
1292                                                 &i2c_bus->i2c_adap);
1293                 if (fe0->dvb.frontend == NULL)
1294                         break;
1295                 dvb_attach(mt2131_attach, fe0->dvb.frontend,
1296                            &i2c_bus->i2c_adap,
1297                            &hauppauge_generic_tunerconfig, 0);
1298                 break;
1299         case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
1300                 i2c_bus = &dev->i2c_bus[0];
1301                 fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
1302                                                 &fusionhdtv_5_express,
1303                                                 &i2c_bus->i2c_adap);
1304                 if (fe0->dvb.frontend == NULL)
1305                         break;
1306                 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1307                            &i2c_bus->i2c_adap, 0x61,
1308                            TUNER_LG_TDVS_H06XF);
1309                 break;
1310         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
1311                 i2c_bus = &dev->i2c_bus[1];
1312                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
1313                                                 &hauppauge_hvr1500q_config,
1314                                                 &dev->i2c_bus[0].i2c_adap);
1315                 if (fe0->dvb.frontend == NULL)
1316                         break;
1317                 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1318                            &i2c_bus->i2c_adap,
1319                            &hauppauge_hvr1500q_tunerconfig);
1320                 break;
1321         case CX23885_BOARD_HAUPPAUGE_HVR1500:
1322                 i2c_bus = &dev->i2c_bus[1];
1323                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
1324                                                 &hauppauge_hvr1500_config,
1325                                                 &dev->i2c_bus[0].i2c_adap);
1326                 if (fe0->dvb.frontend != NULL) {
1327                         struct dvb_frontend *fe;
1328                         struct xc2028_config cfg = {
1329                                 .i2c_adap  = &i2c_bus->i2c_adap,
1330                                 .i2c_addr  = 0x61,
1331                         };
1332                         static struct xc2028_ctrl ctl = {
1333                                 .fname       = XC2028_DEFAULT_FIRMWARE,
1334                                 .max_len     = 64,
1335                                 .demod       = XC3028_FE_OREN538,
1336                         };
1337
1338                         fe = dvb_attach(xc2028_attach,
1339                                         fe0->dvb.frontend, &cfg);
1340                         if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
1341                                 fe->ops.tuner_ops.set_config(fe, &ctl);
1342                 }
1343                 break;
1344         case CX23885_BOARD_HAUPPAUGE_HVR1200:
1345         case CX23885_BOARD_HAUPPAUGE_HVR1700:
1346                 i2c_bus = &dev->i2c_bus[0];
1347                 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1348                         &hauppauge_hvr1200_config,
1349                         &i2c_bus->i2c_adap);
1350                 if (fe0->dvb.frontend == NULL)
1351                         break;
1352                 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1353                            &dev->i2c_bus[1].i2c_adap, 0x42,
1354                            &tda829x_no_probe);
1355                 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1356                            0x60, &dev->i2c_bus[1].i2c_adap,
1357                            &hauppauge_hvr1200_tuner_config);
1358                 break;
1359         case CX23885_BOARD_HAUPPAUGE_HVR1210:
1360                 i2c_bus = &dev->i2c_bus[0];
1361                 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1362                         &hauppauge_hvr1210_config,
1363                         &i2c_bus->i2c_adap);
1364                 if (fe0->dvb.frontend != NULL) {
1365                         dvb_attach(tda18271_attach, fe0->dvb.frontend,
1366                                 0x60, &dev->i2c_bus[1].i2c_adap,
1367                                 &hauppauge_hvr1210_tuner_config);
1368                 }
1369                 break;
1370         case CX23885_BOARD_HAUPPAUGE_HVR1400:
1371                 i2c_bus = &dev->i2c_bus[0];
1372
1373                 if (!dvb_attach(dib7000p_attach, &dib7000p_ops))
1374                         return -ENODEV;
1375
1376                 fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap,
1377                         0x12, &hauppauge_hvr1400_dib7000_config);
1378                 if (fe0->dvb.frontend != NULL) {
1379                         struct dvb_frontend *fe;
1380                         struct xc2028_config cfg = {
1381                                 .i2c_adap  = &dev->i2c_bus[1].i2c_adap,
1382                                 .i2c_addr  = 0x64,
1383                         };
1384                         static struct xc2028_ctrl ctl = {
1385                                 .fname   = XC3028L_DEFAULT_FIRMWARE,
1386                                 .max_len = 64,
1387                                 .demod   = XC3028_FE_DIBCOM52,
1388                                 /* This is true for all demods with
1389                                         v36 firmware? */
1390                                 .type    = XC2028_D2633,
1391                         };
1392
1393                         fe = dvb_attach(xc2028_attach,
1394                                         fe0->dvb.frontend, &cfg);
1395                         if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
1396                                 fe->ops.tuner_ops.set_config(fe, &ctl);
1397                 }
1398                 break;
1399         case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
1400                 i2c_bus = &dev->i2c_bus[port->nr - 1];
1401
1402                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
1403                                                 &dvico_s5h1409_config,
1404                                                 &i2c_bus->i2c_adap);
1405                 if (fe0->dvb.frontend == NULL)
1406                         fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1407                                                         &dvico_s5h1411_config,
1408                                                         &i2c_bus->i2c_adap);
1409                 if (fe0->dvb.frontend != NULL)
1410                         dvb_attach(xc5000_attach, fe0->dvb.frontend,
1411                                    &i2c_bus->i2c_adap,
1412                                    &dvico_xc5000_tunerconfig);
1413                 break;
1414         case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
1415                 i2c_bus = &dev->i2c_bus[port->nr - 1];
1416
1417                 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1418                                                &dvico_fusionhdtv_xc3028,
1419                                                &i2c_bus->i2c_adap);
1420                 if (fe0->dvb.frontend != NULL) {
1421                         struct dvb_frontend      *fe;
1422                         struct xc2028_config      cfg = {
1423                                 .i2c_adap  = &i2c_bus->i2c_adap,
1424                                 .i2c_addr  = 0x61,
1425                         };
1426                         static struct xc2028_ctrl ctl = {
1427                                 .fname       = XC2028_DEFAULT_FIRMWARE,
1428                                 .max_len     = 64,
1429                                 .demod       = XC3028_FE_ZARLINK456,
1430                         };
1431
1432                         fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
1433                                         &cfg);
1434                         if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
1435                                 fe->ops.tuner_ops.set_config(fe, &ctl);
1436                 }
1437                 break;
1438         }
1439         case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: {
1440                 i2c_bus = &dev->i2c_bus[port->nr - 1];
1441                 /* cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); */
1442                 /* cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); */
1443
1444                 if (!dvb_attach(dib7000p_attach, &dib7000p_ops))
1445                         return -ENODEV;
1446
1447                 if (dib7000p_ops.i2c_enumeration(&i2c_bus->i2c_adap, 1, 0x12, &dib7070p_dib7000p_config) < 0) {
1448                         printk(KERN_WARNING "Unable to enumerate dib7000p\n");
1449                         return -ENODEV;
1450                 }
1451                 fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, 0x80, &dib7070p_dib7000p_config);
1452                 if (fe0->dvb.frontend != NULL) {
1453                         struct i2c_adapter *tun_i2c;
1454
1455                         fe0->dvb.frontend->sec_priv = kmalloc(sizeof(dib7000p_ops), GFP_KERNEL);
1456                         memcpy(fe0->dvb.frontend->sec_priv, &dib7000p_ops, sizeof(dib7000p_ops));
1457                         tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1);
1458                         if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config))
1459                                 return -ENODEV;
1460                 }
1461                 break;
1462         }
1463         case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
1464         case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
1465         case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
1466                 i2c_bus = &dev->i2c_bus[0];
1467
1468                 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1469                         &dvico_fusionhdtv_xc3028,
1470                         &i2c_bus->i2c_adap);
1471                 if (fe0->dvb.frontend != NULL) {
1472                         struct dvb_frontend      *fe;
1473                         struct xc2028_config      cfg = {
1474                                 .i2c_adap  = &dev->i2c_bus[1].i2c_adap,
1475                                 .i2c_addr  = 0x61,
1476                         };
1477                         static struct xc2028_ctrl ctl = {
1478                                 .fname       = XC2028_DEFAULT_FIRMWARE,
1479                                 .max_len     = 64,
1480                                 .demod       = XC3028_FE_ZARLINK456,
1481                         };
1482
1483                         fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
1484                                 &cfg);
1485                         if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
1486                                 fe->ops.tuner_ops.set_config(fe, &ctl);
1487                 }
1488                 break;
1489         case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
1490                 i2c_bus = &dev->i2c_bus[0];
1491
1492                 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1493                                                &dvico_fusionhdtv_xc3028,
1494                                                &i2c_bus->i2c_adap);
1495                 if (fe0->dvb.frontend != NULL) {
1496                         struct dvb_frontend     *fe;
1497                         struct xc4000_config    cfg = {
1498                                 .i2c_address      = 0x61,
1499                                 .default_pm       = 0,
1500                                 .dvb_amplitude    = 134,
1501                                 .set_smoothedcvbs = 1,
1502                                 .if_khz           = 4560
1503                         };
1504
1505                         fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,
1506                                         &dev->i2c_bus[1].i2c_adap, &cfg);
1507                         if (!fe) {
1508                                 printk(KERN_ERR "%s/2: xc4000 attach failed\n",
1509                                        dev->name);
1510                                 goto frontend_detach;
1511                         }
1512                 }
1513                 break;
1514         case CX23885_BOARD_TBS_6920:
1515                 i2c_bus = &dev->i2c_bus[1];
1516
1517                 fe0->dvb.frontend = dvb_attach(cx24116_attach,
1518                                         &tbs_cx24116_config,
1519                                         &i2c_bus->i2c_adap);
1520                 if (fe0->dvb.frontend != NULL)
1521                         fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
1522
1523                 break;
1524         case CX23885_BOARD_TBS_6980:
1525         case CX23885_BOARD_TBS_6981:
1526                 i2c_bus = &dev->i2c_bus[1];
1527
1528                 switch (port->nr) {
1529                 /* PORT B */
1530                 case 1:
1531                         fe0->dvb.frontend = dvb_attach(cx24117_attach,
1532                                         &tbs_cx24117_config,
1533                                         &i2c_bus->i2c_adap);
1534                         break;
1535                 /* PORT C */
1536                 case 2:
1537                         fe0->dvb.frontend = dvb_attach(cx24117_attach,
1538                                         &tbs_cx24117_config,
1539                                         &i2c_bus->i2c_adap);
1540                         break;
1541                 }
1542                 break;
1543         case CX23885_BOARD_TEVII_S470:
1544                 i2c_bus = &dev->i2c_bus[1];
1545
1546                 fe0->dvb.frontend = dvb_attach(ds3000_attach,
1547                                         &tevii_ds3000_config,
1548                                         &i2c_bus->i2c_adap);
1549                 if (fe0->dvb.frontend != NULL) {
1550                         dvb_attach(ts2020_attach, fe0->dvb.frontend,
1551                                 &tevii_ts2020_config, &i2c_bus->i2c_adap);
1552                         fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
1553                 }
1554
1555                 break;
1556         case CX23885_BOARD_DVBWORLD_2005:
1557                 i2c_bus = &dev->i2c_bus[1];
1558
1559                 fe0->dvb.frontend = dvb_attach(cx24116_attach,
1560                         &dvbworld_cx24116_config,
1561                         &i2c_bus->i2c_adap);
1562                 break;
1563         case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
1564                 i2c_bus = &dev->i2c_bus[0];
1565                 switch (port->nr) {
1566                 /* port B */
1567                 case 1:
1568                         fe0->dvb.frontend = dvb_attach(stv0900_attach,
1569                                                         &netup_stv0900_config,
1570                                                         &i2c_bus->i2c_adap, 0);
1571                         if (fe0->dvb.frontend != NULL) {
1572                                 if (dvb_attach(stv6110_attach,
1573                                                 fe0->dvb.frontend,
1574                                                 &netup_stv6110_tunerconfig_a,
1575                                                 &i2c_bus->i2c_adap)) {
1576                                         if (!dvb_attach(lnbh24_attach,
1577                                                         fe0->dvb.frontend,
1578                                                         &i2c_bus->i2c_adap,
1579                                                         LNBH24_PCL | LNBH24_TTX,
1580                                                         LNBH24_TEN, 0x09))
1581                                                 printk(KERN_ERR
1582                                                         "No LNBH24 found!\n");
1583
1584                                 }
1585                         }
1586                         break;
1587                 /* port C */
1588                 case 2:
1589                         fe0->dvb.frontend = dvb_attach(stv0900_attach,
1590                                                         &netup_stv0900_config,
1591                                                         &i2c_bus->i2c_adap, 1);
1592                         if (fe0->dvb.frontend != NULL) {
1593                                 if (dvb_attach(stv6110_attach,
1594                                                 fe0->dvb.frontend,
1595                                                 &netup_stv6110_tunerconfig_b,
1596                                                 &i2c_bus->i2c_adap)) {
1597                                         if (!dvb_attach(lnbh24_attach,
1598                                                         fe0->dvb.frontend,
1599                                                         &i2c_bus->i2c_adap,
1600                                                         LNBH24_PCL | LNBH24_TTX,
1601                                                         LNBH24_TEN, 0x0a))
1602                                                 printk(KERN_ERR
1603                                                         "No LNBH24 found!\n");
1604
1605                                 }
1606                         }
1607                         break;
1608                 }
1609                 break;
1610         case CX23885_BOARD_MYGICA_X8506:
1611                 i2c_bus = &dev->i2c_bus[0];
1612                 i2c_bus2 = &dev->i2c_bus[1];
1613                 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1614                         &mygica_x8506_lgs8gl5_config,
1615                         &i2c_bus->i2c_adap);
1616                 if (fe0->dvb.frontend == NULL)
1617                         break;
1618                 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1619                            &i2c_bus2->i2c_adap, &mygica_x8506_xc5000_config);
1620                 cx23885_set_frontend_hook(port, fe0->dvb.frontend);
1621                 break;
1622         case CX23885_BOARD_MYGICA_X8507:
1623                 i2c_bus = &dev->i2c_bus[0];
1624                 i2c_bus2 = &dev->i2c_bus[1];
1625                 fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
1626                         &mygica_x8507_mb86a20s_config,
1627                         &i2c_bus->i2c_adap);
1628                 if (fe0->dvb.frontend == NULL)
1629                         break;
1630
1631                 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1632                            &i2c_bus2->i2c_adap,
1633                            &mygica_x8507_xc5000_config);
1634                 cx23885_set_frontend_hook(port, fe0->dvb.frontend);
1635                 break;
1636         case CX23885_BOARD_MAGICPRO_PROHDTVE2:
1637                 i2c_bus = &dev->i2c_bus[0];
1638                 i2c_bus2 = &dev->i2c_bus[1];
1639                 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1640                         &magicpro_prohdtve2_lgs8g75_config,
1641                         &i2c_bus->i2c_adap);
1642                 if (fe0->dvb.frontend == NULL)
1643                         break;
1644                 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1645                            &i2c_bus2->i2c_adap,
1646                            &magicpro_prohdtve2_xc5000_config);
1647                 cx23885_set_frontend_hook(port, fe0->dvb.frontend);
1648                 break;
1649         case CX23885_BOARD_HAUPPAUGE_HVR1850:
1650                 i2c_bus = &dev->i2c_bus[0];
1651                 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1652                         &hcw_s5h1411_config,
1653                         &i2c_bus->i2c_adap);
1654                 if (fe0->dvb.frontend == NULL)
1655                         break;
1656                 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1657                            0x60, &dev->i2c_bus[0].i2c_adap,
1658                            &hauppauge_tda18271_config);
1659
1660                 tda18271_attach(&dev->ts1.analog_fe,
1661                         0x60, &dev->i2c_bus[1].i2c_adap,
1662                         &hauppauge_tda18271_config);
1663
1664                 break;
1665         case CX23885_BOARD_HAUPPAUGE_HVR1290:
1666                 i2c_bus = &dev->i2c_bus[0];
1667                 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1668                         &hcw_s5h1411_config,
1669                         &i2c_bus->i2c_adap);
1670                 if (fe0->dvb.frontend == NULL)
1671                         break;
1672                 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1673                            0x60, &dev->i2c_bus[0].i2c_adap,
1674                            &hauppauge_tda18271_config);
1675                 break;
1676         case CX23885_BOARD_MYGICA_X8558PRO:
1677                 switch (port->nr) {
1678                 /* port B */
1679                 case 1:
1680                         i2c_bus = &dev->i2c_bus[0];
1681                         fe0->dvb.frontend = dvb_attach(atbm8830_attach,
1682                                 &mygica_x8558pro_atbm8830_cfg1,
1683                                 &i2c_bus->i2c_adap);
1684                         if (fe0->dvb.frontend == NULL)
1685                                 break;
1686                         dvb_attach(max2165_attach, fe0->dvb.frontend,
1687                                    &i2c_bus->i2c_adap,
1688                                    &mygic_x8558pro_max2165_cfg1);
1689                         break;
1690                 /* port C */
1691                 case 2:
1692                         i2c_bus = &dev->i2c_bus[1];
1693                         fe0->dvb.frontend = dvb_attach(atbm8830_attach,
1694                                 &mygica_x8558pro_atbm8830_cfg2,
1695                                 &i2c_bus->i2c_adap);
1696                         if (fe0->dvb.frontend == NULL)
1697                                 break;
1698                         dvb_attach(max2165_attach, fe0->dvb.frontend,
1699                                    &i2c_bus->i2c_adap,
1700                                    &mygic_x8558pro_max2165_cfg2);
1701                 }
1702                 break;
1703         case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
1704                 i2c_bus = &dev->i2c_bus[0];
1705                 mfe_shared = 1;/* MFE */
1706                 port->frontends.gate = 0;/* not clear for me yet */
1707                 /* ports B, C */
1708                 /* MFE frontend 1 DVB-T */
1709                 fe0->dvb.frontend = dvb_attach(stv0367ter_attach,
1710                                         &netup_stv0367_config[port->nr - 1],
1711                                         &i2c_bus->i2c_adap);
1712                 if (fe0->dvb.frontend == NULL)
1713                         break;
1714                 if (NULL == dvb_attach(xc5000_attach, fe0->dvb.frontend,
1715                                         &i2c_bus->i2c_adap,
1716                                         &netup_xc5000_config[port->nr - 1]))
1717                         goto frontend_detach;
1718                 /* load xc5000 firmware */
1719                 fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);
1720
1721                 /* MFE frontend 2 */
1722                 fe1 = vb2_dvb_get_frontend(&port->frontends, 2);
1723                 if (fe1 == NULL)
1724                         goto frontend_detach;
1725                 /* DVB-C init */
1726                 fe1->dvb.frontend = dvb_attach(stv0367cab_attach,
1727                                         &netup_stv0367_config[port->nr - 1],
1728                                         &i2c_bus->i2c_adap);
1729                 if (fe1->dvb.frontend == NULL)
1730                         break;
1731
1732                 fe1->dvb.frontend->id = 1;
1733                 if (NULL == dvb_attach(xc5000_attach,
1734                                        fe1->dvb.frontend,
1735                                        &i2c_bus->i2c_adap,
1736                                        &netup_xc5000_config[port->nr - 1]))
1737                         goto frontend_detach;
1738                 break;
1739         case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
1740                 i2c_bus = &dev->i2c_bus[0];
1741                 i2c_bus2 = &dev->i2c_bus[1];
1742
1743                 switch (port->nr) {
1744                 /* port b */
1745                 case 1:
1746                         fe0->dvb.frontend = dvb_attach(drxk_attach,
1747                                         &terratec_drxk_config[0],
1748                                         &i2c_bus->i2c_adap);
1749                         if (fe0->dvb.frontend == NULL)
1750                                 break;
1751                         if (!dvb_attach(mt2063_attach,
1752                                         fe0->dvb.frontend,
1753                                         &terratec_mt2063_config[0],
1754                                         &i2c_bus2->i2c_adap))
1755                                 goto frontend_detach;
1756                         break;
1757                 /* port c */
1758                 case 2:
1759                         fe0->dvb.frontend = dvb_attach(drxk_attach,
1760                                         &terratec_drxk_config[1],
1761                                         &i2c_bus->i2c_adap);
1762                         if (fe0->dvb.frontend == NULL)
1763                                 break;
1764                         if (!dvb_attach(mt2063_attach,
1765                                         fe0->dvb.frontend,
1766                                         &terratec_mt2063_config[1],
1767                                         &i2c_bus2->i2c_adap))
1768                                 goto frontend_detach;
1769                         break;
1770                 }
1771                 break;
1772         case CX23885_BOARD_TEVII_S471:
1773                 i2c_bus = &dev->i2c_bus[1];
1774
1775                 fe0->dvb.frontend = dvb_attach(ds3000_attach,
1776                                         &tevii_ds3000_config,
1777                                         &i2c_bus->i2c_adap);
1778                 if (fe0->dvb.frontend == NULL)
1779                         break;
1780                 dvb_attach(ts2020_attach, fe0->dvb.frontend,
1781                            &tevii_ts2020_config, &i2c_bus->i2c_adap);
1782                 break;
1783         case CX23885_BOARD_PROF_8000:
1784                 i2c_bus = &dev->i2c_bus[0];
1785
1786                 fe0->dvb.frontend = dvb_attach(stv090x_attach,
1787                                                 &prof_8000_stv090x_config,
1788                                                 &i2c_bus->i2c_adap,
1789                                                 STV090x_DEMODULATOR_0);
1790                 if (fe0->dvb.frontend == NULL)
1791                         break;
1792                 if (!dvb_attach(stb6100_attach,
1793                                 fe0->dvb.frontend,
1794                                 &prof_8000_stb6100_config,
1795                                 &i2c_bus->i2c_adap))
1796                         goto frontend_detach;
1797
1798                 fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;
1799                 break;
1800         case CX23885_BOARD_HAUPPAUGE_HVR4400: {
1801                 struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;
1802                 struct a8293_platform_data a8293_pdata = {};
1803
1804                 i2c_bus = &dev->i2c_bus[0];
1805                 i2c_bus2 = &dev->i2c_bus[1];
1806                 switch (port->nr) {
1807                 /* port b */
1808                 case 1:
1809                         /* attach demod + tuner combo */
1810                         memset(&info, 0, sizeof(info));
1811                         strlcpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);
1812                         info.addr = 0x05;
1813                         info.platform_data = &tda10071_pdata;
1814                         request_module("tda10071");
1815                         client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
1816                         if (!client_demod || !client_demod->dev.driver)
1817                                 goto frontend_detach;
1818                         if (!try_module_get(client_demod->dev.driver->owner)) {
1819                                 i2c_unregister_device(client_demod);
1820                                 goto frontend_detach;
1821                         }
1822                         fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);
1823                         port->i2c_client_demod = client_demod;
1824
1825                         /* attach SEC */
1826                         a8293_pdata.dvb_frontend = fe0->dvb.frontend;
1827                         memset(&info, 0, sizeof(info));
1828                         strlcpy(info.type, "a8293", I2C_NAME_SIZE);
1829                         info.addr = 0x0b;
1830                         info.platform_data = &a8293_pdata;
1831                         request_module("a8293");
1832                         client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info);
1833                         if (!client_sec || !client_sec->dev.driver)
1834                                 goto frontend_detach;
1835                         if (!try_module_get(client_sec->dev.driver->owner)) {
1836                                 i2c_unregister_device(client_sec);
1837                                 goto frontend_detach;
1838                         }
1839                         port->i2c_client_sec = client_sec;
1840                         break;
1841                 /* port c */
1842                 case 2:
1843                         fe0->dvb.frontend = dvb_attach(si2165_attach,
1844                                         &hauppauge_hvr4400_si2165_config,
1845                                         &i2c_bus->i2c_adap);
1846                         if (fe0->dvb.frontend == NULL)
1847                                 break;
1848                         fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
1849                         if (!dvb_attach(tda18271_attach,
1850                                         fe0->dvb.frontend,
1851                                         0x60, &i2c_bus2->i2c_adap,
1852                                   &hauppauge_hvr4400_tuner_config))
1853                                 goto frontend_detach;
1854                         break;
1855                 }
1856                 break;
1857         }
1858         case CX23885_BOARD_HAUPPAUGE_STARBURST: {
1859                 struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;
1860                 struct a8293_platform_data a8293_pdata = {};
1861
1862                 i2c_bus = &dev->i2c_bus[0];
1863
1864                 /* attach demod + tuner combo */
1865                 memset(&info, 0, sizeof(info));
1866                 strlcpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);
1867                 info.addr = 0x05;
1868                 info.platform_data = &tda10071_pdata;
1869                 request_module("tda10071");
1870                 client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
1871                 if (!client_demod || !client_demod->dev.driver)
1872                         goto frontend_detach;
1873                 if (!try_module_get(client_demod->dev.driver->owner)) {
1874                         i2c_unregister_device(client_demod);
1875                         goto frontend_detach;
1876                 }
1877                 fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);
1878                 port->i2c_client_demod = client_demod;
1879
1880                 /* attach SEC */
1881                 a8293_pdata.dvb_frontend = fe0->dvb.frontend;
1882                 memset(&info, 0, sizeof(info));
1883                 strlcpy(info.type, "a8293", I2C_NAME_SIZE);
1884                 info.addr = 0x0b;
1885                 info.platform_data = &a8293_pdata;
1886                 request_module("a8293");
1887                 client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info);
1888                 if (!client_sec || !client_sec->dev.driver)
1889                         goto frontend_detach;
1890                 if (!try_module_get(client_sec->dev.driver->owner)) {
1891                         i2c_unregister_device(client_sec);
1892                         goto frontend_detach;
1893                 }
1894                 port->i2c_client_sec = client_sec;
1895                 break;
1896         }
1897         case CX23885_BOARD_DVBSKY_T9580:
1898         case CX23885_BOARD_DVBSKY_S950:
1899                 i2c_bus = &dev->i2c_bus[0];
1900                 i2c_bus2 = &dev->i2c_bus[1];
1901                 switch (port->nr) {
1902                 /* port b - satellite */
1903                 case 1:
1904                         /* attach frontend */
1905                         fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
1906                                         &dvbsky_t9580_m88ds3103_config,
1907                                         &i2c_bus2->i2c_adap, &adapter);
1908                         if (fe0->dvb.frontend == NULL)
1909                                 break;
1910
1911                         /* attach tuner */
1912                         memset(&ts2020_config, 0, sizeof(ts2020_config));
1913                         ts2020_config.fe = fe0->dvb.frontend;
1914                         ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
1915                         memset(&info, 0, sizeof(struct i2c_board_info));
1916                         strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
1917                         info.addr = 0x60;
1918                         info.platform_data = &ts2020_config;
1919                         request_module(info.type);
1920                         client_tuner = i2c_new_device(adapter, &info);
1921                         if (client_tuner == NULL ||
1922                                         client_tuner->dev.driver == NULL)
1923                                 goto frontend_detach;
1924                         if (!try_module_get(client_tuner->dev.driver->owner)) {
1925                                 i2c_unregister_device(client_tuner);
1926                                 goto frontend_detach;
1927                         }
1928
1929                         /* delegate signal strength measurement to tuner */
1930                         fe0->dvb.frontend->ops.read_signal_strength =
1931                                 fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
1932
1933                         /*
1934                          * for setting the voltage we need to set GPIOs on
1935                          * the card.
1936                          */
1937                         port->fe_set_voltage =
1938                                 fe0->dvb.frontend->ops.set_voltage;
1939                         fe0->dvb.frontend->ops.set_voltage =
1940                                 dvbsky_t9580_set_voltage;
1941
1942                         port->i2c_client_tuner = client_tuner;
1943
1944                         break;
1945                 /* port c - terrestrial/cable */
1946                 case 2:
1947                         /* attach frontend */
1948                         memset(&si2168_config, 0, sizeof(si2168_config));
1949                         si2168_config.i2c_adapter = &adapter;
1950                         si2168_config.fe = &fe0->dvb.frontend;
1951                         si2168_config.ts_mode = SI2168_TS_SERIAL;
1952                         memset(&info, 0, sizeof(struct i2c_board_info));
1953                         strlcpy(info.type, "si2168", I2C_NAME_SIZE);
1954                         info.addr = 0x64;
1955                         info.platform_data = &si2168_config;
1956                         request_module(info.type);
1957                         client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
1958                         if (client_demod == NULL ||
1959                                         client_demod->dev.driver == NULL)
1960                                 goto frontend_detach;
1961                         if (!try_module_get(client_demod->dev.driver->owner)) {
1962                                 i2c_unregister_device(client_demod);
1963                                 goto frontend_detach;
1964                         }
1965                         port->i2c_client_demod = client_demod;
1966
1967                         /* attach tuner */
1968                         memset(&si2157_config, 0, sizeof(si2157_config));
1969                         si2157_config.fe = fe0->dvb.frontend;
1970                         si2157_config.if_port = 1;
1971                         memset(&info, 0, sizeof(struct i2c_board_info));
1972                         strlcpy(info.type, "si2157", I2C_NAME_SIZE);
1973                         info.addr = 0x60;
1974                         info.platform_data = &si2157_config;
1975                         request_module(info.type);
1976                         client_tuner = i2c_new_device(adapter, &info);
1977                         if (client_tuner == NULL ||
1978                                         client_tuner->dev.driver == NULL)
1979                                 goto frontend_detach;
1980
1981                         if (!try_module_get(client_tuner->dev.driver->owner)) {
1982                                 i2c_unregister_device(client_tuner);
1983                                 goto frontend_detach;
1984                         }
1985                         port->i2c_client_tuner = client_tuner;
1986                         break;
1987                 }
1988                 break;
1989         case CX23885_BOARD_DVBSKY_T980C:
1990         case CX23885_BOARD_TT_CT2_4500_CI:
1991                 i2c_bus = &dev->i2c_bus[1];
1992                 i2c_bus2 = &dev->i2c_bus[0];
1993
1994                 /* attach frontend */
1995                 memset(&si2168_config, 0, sizeof(si2168_config));
1996                 si2168_config.i2c_adapter = &adapter;
1997                 si2168_config.fe = &fe0->dvb.frontend;
1998                 si2168_config.ts_mode = SI2168_TS_PARALLEL;
1999                 memset(&info, 0, sizeof(struct i2c_board_info));
2000                 strlcpy(info.type, "si2168", I2C_NAME_SIZE);
2001                 info.addr = 0x64;
2002                 info.platform_data = &si2168_config;
2003                 request_module(info.type);
2004                 client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
2005                 if (client_demod == NULL || client_demod->dev.driver == NULL)
2006                         goto frontend_detach;
2007                 if (!try_module_get(client_demod->dev.driver->owner)) {
2008                         i2c_unregister_device(client_demod);
2009                         goto frontend_detach;
2010                 }
2011                 port->i2c_client_demod = client_demod;
2012
2013                 /* attach tuner */
2014                 memset(&si2157_config, 0, sizeof(si2157_config));
2015                 si2157_config.fe = fe0->dvb.frontend;
2016                 si2157_config.if_port = 1;
2017                 memset(&info, 0, sizeof(struct i2c_board_info));
2018                 strlcpy(info.type, "si2157", I2C_NAME_SIZE);
2019                 info.addr = 0x60;
2020                 info.platform_data = &si2157_config;
2021                 request_module(info.type);
2022                 client_tuner = i2c_new_device(adapter, &info);
2023                 if (client_tuner == NULL ||
2024                                 client_tuner->dev.driver == NULL)
2025                         goto frontend_detach;
2026                 if (!try_module_get(client_tuner->dev.driver->owner)) {
2027                         i2c_unregister_device(client_tuner);
2028                         goto frontend_detach;
2029                 }
2030                 port->i2c_client_tuner = client_tuner;
2031                 break;
2032         case CX23885_BOARD_DVBSKY_S950C:
2033                 i2c_bus = &dev->i2c_bus[1];
2034                 i2c_bus2 = &dev->i2c_bus[0];
2035
2036                 /* attach frontend */
2037                 fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
2038                                 &dvbsky_s950c_m88ds3103_config,
2039                                 &i2c_bus->i2c_adap, &adapter);
2040                 if (fe0->dvb.frontend == NULL)
2041                         break;
2042
2043                 /* attach tuner */
2044                 memset(&ts2020_config, 0, sizeof(ts2020_config));
2045                 ts2020_config.fe = fe0->dvb.frontend;
2046                 ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
2047                 memset(&info, 0, sizeof(struct i2c_board_info));
2048                 strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
2049                 info.addr = 0x60;
2050                 info.platform_data = &ts2020_config;
2051                 request_module(info.type);
2052                 client_tuner = i2c_new_device(adapter, &info);
2053                 if (client_tuner == NULL || client_tuner->dev.driver == NULL)
2054                         goto frontend_detach;
2055                 if (!try_module_get(client_tuner->dev.driver->owner)) {
2056                         i2c_unregister_device(client_tuner);
2057                         goto frontend_detach;
2058                 }
2059
2060                 /* delegate signal strength measurement to tuner */
2061                 fe0->dvb.frontend->ops.read_signal_strength =
2062                         fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
2063
2064                 port->i2c_client_tuner = client_tuner;
2065                 break;
2066         case CX23885_BOARD_DVBSKY_S952:
2067                 switch (port->nr) {
2068                 /* port b */
2069                 case 1:
2070                         i2c_bus = &dev->i2c_bus[1];
2071                         p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config;
2072                         p_set_voltage = dvbsky_t9580_set_voltage;
2073                         break;
2074                 /* port c */
2075                 case 2:
2076                         i2c_bus = &dev->i2c_bus[0];
2077                         p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config;
2078                         p_set_voltage = dvbsky_s952_portc_set_voltage;
2079                         break;
2080                 }
2081
2082                 /* attach frontend */
2083                 fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
2084                                 p_m88ds3103_config,
2085                                 &i2c_bus->i2c_adap, &adapter);
2086                 if (fe0->dvb.frontend == NULL)
2087                         break;
2088
2089                 /* attach tuner */
2090                 memset(&ts2020_config, 0, sizeof(ts2020_config));
2091                 ts2020_config.fe = fe0->dvb.frontend;
2092                 ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
2093                 memset(&info, 0, sizeof(struct i2c_board_info));
2094                 strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
2095                 info.addr = 0x60;
2096                 info.platform_data = &ts2020_config;
2097                 request_module(info.type);
2098                 client_tuner = i2c_new_device(adapter, &info);
2099                 if (client_tuner == NULL || client_tuner->dev.driver == NULL)
2100                         goto frontend_detach;
2101                 if (!try_module_get(client_tuner->dev.driver->owner)) {
2102                         i2c_unregister_device(client_tuner);
2103                         goto frontend_detach;
2104                 }
2105
2106                 /* delegate signal strength measurement to tuner */
2107                 fe0->dvb.frontend->ops.read_signal_strength =
2108                         fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
2109
2110                 /*
2111                  * for setting the voltage we need to set GPIOs on
2112                  * the card.
2113                  */
2114                 port->fe_set_voltage =
2115                         fe0->dvb.frontend->ops.set_voltage;
2116                 fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
2117
2118                 port->i2c_client_tuner = client_tuner;
2119                 break;
2120         case CX23885_BOARD_DVBSKY_T982:
2121                 memset(&si2168_config, 0, sizeof(si2168_config));
2122                 switch (port->nr) {
2123                 /* port b */
2124                 case 1:
2125                         i2c_bus = &dev->i2c_bus[1];
2126                         si2168_config.ts_mode = SI2168_TS_PARALLEL;
2127                         break;
2128                 /* port c */
2129                 case 2:
2130                         i2c_bus = &dev->i2c_bus[0];
2131                         si2168_config.ts_mode = SI2168_TS_SERIAL;
2132                         break;
2133                 }
2134
2135                 /* attach frontend */
2136                 si2168_config.i2c_adapter = &adapter;
2137                 si2168_config.fe = &fe0->dvb.frontend;
2138                 memset(&info, 0, sizeof(struct i2c_board_info));
2139                 strlcpy(info.type, "si2168", I2C_NAME_SIZE);
2140                 info.addr = 0x64;
2141                 info.platform_data = &si2168_config;
2142                 request_module(info.type);
2143                 client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
2144                 if (client_demod == NULL || client_demod->dev.driver == NULL)
2145                         goto frontend_detach;
2146                 if (!try_module_get(client_demod->dev.driver->owner)) {
2147                         i2c_unregister_device(client_demod);
2148                         goto frontend_detach;
2149                 }
2150                 port->i2c_client_demod = client_demod;
2151
2152                 /* attach tuner */
2153                 memset(&si2157_config, 0, sizeof(si2157_config));
2154                 si2157_config.fe = fe0->dvb.frontend;
2155                 si2157_config.if_port = 1;
2156                 memset(&info, 0, sizeof(struct i2c_board_info));
2157                 strlcpy(info.type, "si2157", I2C_NAME_SIZE);
2158                 info.addr = 0x60;
2159                 info.platform_data = &si2157_config;
2160                 request_module(info.type);
2161                 client_tuner = i2c_new_device(adapter, &info);
2162                 if (client_tuner == NULL ||
2163                                 client_tuner->dev.driver == NULL)
2164                         goto frontend_detach;
2165                 if (!try_module_get(client_tuner->dev.driver->owner)) {
2166                         i2c_unregister_device(client_tuner);
2167                         goto frontend_detach;
2168                 }
2169                 port->i2c_client_tuner = client_tuner;
2170                 break;
2171         case CX23885_BOARD_HAUPPAUGE_HVR5525:
2172                 switch (port->nr) {
2173                 struct m88rs6000t_config m88rs6000t_config;
2174                 struct a8293_platform_data a8293_pdata = {};
2175
2176                 /* port b - satellite */
2177                 case 1:
2178                         /* attach frontend */
2179                         fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
2180                                         &hauppauge_hvr5525_m88ds3103_config,
2181                                         &dev->i2c_bus[0].i2c_adap, &adapter);
2182                         if (fe0->dvb.frontend == NULL)
2183                                 break;
2184
2185                         /* attach SEC */
2186                         a8293_pdata.dvb_frontend = fe0->dvb.frontend;
2187                         memset(&info, 0, sizeof(info));
2188                         strlcpy(info.type, "a8293", I2C_NAME_SIZE);
2189                         info.addr = 0x0b;
2190                         info.platform_data = &a8293_pdata;
2191                         request_module("a8293");
2192                         client_sec = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
2193                         if (!client_sec || !client_sec->dev.driver)
2194                                 goto frontend_detach;
2195                         if (!try_module_get(client_sec->dev.driver->owner)) {
2196                                 i2c_unregister_device(client_sec);
2197                                 goto frontend_detach;
2198                         }
2199                         port->i2c_client_sec = client_sec;
2200
2201                         /* attach tuner */
2202                         memset(&m88rs6000t_config, 0, sizeof(m88rs6000t_config));
2203                         m88rs6000t_config.fe = fe0->dvb.frontend;
2204                         memset(&info, 0, sizeof(struct i2c_board_info));
2205                         strlcpy(info.type, "m88rs6000t", I2C_NAME_SIZE);
2206                         info.addr = 0x21;
2207                         info.platform_data = &m88rs6000t_config;
2208                         request_module("%s", info.type);
2209                         client_tuner = i2c_new_device(adapter, &info);
2210                         if (!client_tuner || !client_tuner->dev.driver)
2211                                 goto frontend_detach;
2212                         if (!try_module_get(client_tuner->dev.driver->owner)) {
2213                                 i2c_unregister_device(client_tuner);
2214                                 goto frontend_detach;
2215                         }
2216                         port->i2c_client_tuner = client_tuner;
2217
2218                         /* delegate signal strength measurement to tuner */
2219                         fe0->dvb.frontend->ops.read_signal_strength =
2220                                 fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
2221                         break;
2222                 /* port c - terrestrial/cable */
2223                 case 2:
2224                         /* attach frontend */
2225                         memset(&si2168_config, 0, sizeof(si2168_config));
2226                         si2168_config.i2c_adapter = &adapter;
2227                         si2168_config.fe = &fe0->dvb.frontend;
2228                         si2168_config.ts_mode = SI2168_TS_SERIAL;
2229                         memset(&info, 0, sizeof(struct i2c_board_info));
2230                         strlcpy(info.type, "si2168", I2C_NAME_SIZE);
2231                         info.addr = 0x64;
2232                         info.platform_data = &si2168_config;
2233                         request_module("%s", info.type);
2234                         client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
2235                         if (!client_demod || !client_demod->dev.driver)
2236                                 goto frontend_detach;
2237                         if (!try_module_get(client_demod->dev.driver->owner)) {
2238                                 i2c_unregister_device(client_demod);
2239                                 goto frontend_detach;
2240                         }
2241                         port->i2c_client_demod = client_demod;
2242
2243                         /* attach tuner */
2244                         memset(&si2157_config, 0, sizeof(si2157_config));
2245                         si2157_config.fe = fe0->dvb.frontend;
2246                         si2157_config.if_port = 1;
2247                         memset(&info, 0, sizeof(struct i2c_board_info));
2248                         strlcpy(info.type, "si2157", I2C_NAME_SIZE);
2249                         info.addr = 0x60;
2250                         info.platform_data = &si2157_config;
2251                         request_module("%s", info.type);
2252                         client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
2253                         if (!client_tuner || !client_tuner->dev.driver) {
2254                                 module_put(client_demod->dev.driver->owner);
2255                                 i2c_unregister_device(client_demod);
2256                                 port->i2c_client_demod = NULL;
2257                                 goto frontend_detach;
2258                         }
2259                         if (!try_module_get(client_tuner->dev.driver->owner)) {
2260                                 i2c_unregister_device(client_tuner);
2261                                 module_put(client_demod->dev.driver->owner);
2262                                 i2c_unregister_device(client_demod);
2263                                 port->i2c_client_demod = NULL;
2264                                 goto frontend_detach;
2265                         }
2266                         port->i2c_client_tuner = client_tuner;
2267                         break;
2268                 }
2269                 break;
2270         default:
2271                 printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
2272                         " isn't supported yet\n",
2273                        dev->name);
2274                 break;
2275         }
2276
2277         if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
2278                 printk(KERN_ERR "%s: frontend initialization failed\n",
2279                        dev->name);
2280                 goto frontend_detach;
2281         }
2282
2283         /* define general-purpose callback pointer */
2284         fe0->dvb.frontend->callback = cx23885_tuner_callback;
2285         if (fe1)
2286                 fe1->dvb.frontend->callback = cx23885_tuner_callback;
2287 #if 0
2288         /* Ensure all frontends negotiate bus access */
2289         fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
2290         if (fe1)
2291                 fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
2292 #endif
2293
2294         /* Put the analog decoder in standby to keep it quiet */
2295         call_all(dev, core, s_power, 0);
2296
2297         if (fe0->dvb.frontend->ops.analog_ops.standby)
2298                 fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
2299
2300         /* register everything */
2301         ret = vb2_dvb_register_bus(&port->frontends, THIS_MODULE, port,
2302                                         &dev->pci->dev, adapter_nr, mfe_shared);
2303         if (ret)
2304                 goto frontend_detach;
2305
2306         ret = dvb_register_ci_mac(port);
2307         if (ret)
2308                 goto frontend_detach;
2309
2310         return 0;
2311
2312 frontend_detach:
2313         /* remove I2C client for SEC */
2314         client_sec = port->i2c_client_sec;
2315         if (client_sec) {
2316                 module_put(client_sec->dev.driver->owner);
2317                 i2c_unregister_device(client_sec);
2318                 port->i2c_client_sec = NULL;
2319         }
2320
2321         /* remove I2C client for tuner */
2322         client_tuner = port->i2c_client_tuner;
2323         if (client_tuner) {
2324                 module_put(client_tuner->dev.driver->owner);
2325                 i2c_unregister_device(client_tuner);
2326                 port->i2c_client_tuner = NULL;
2327         }
2328
2329         /* remove I2C client for demodulator */
2330         client_demod = port->i2c_client_demod;
2331         if (client_demod) {
2332                 module_put(client_demod->dev.driver->owner);
2333                 i2c_unregister_device(client_demod);
2334                 port->i2c_client_demod = NULL;
2335         }
2336
2337         port->gate_ctrl = NULL;
2338         vb2_dvb_dealloc_frontends(&port->frontends);
2339         return -EINVAL;
2340 }
2341
2342 int cx23885_dvb_register(struct cx23885_tsport *port)
2343 {
2344
2345         struct vb2_dvb_frontend *fe0;
2346         struct cx23885_dev *dev = port->dev;
2347         int err, i;
2348
2349         /* Here we need to allocate the correct number of frontends,
2350          * as reflected in the cards struct. The reality is that currently
2351          * no cx23885 boards support this - yet. But, if we don't modify this
2352          * code then the second frontend would never be allocated (later)
2353          * and fail with error before the attach in dvb_register().
2354          * Without these changes we risk an OOPS later. The changes here
2355          * are for safety, and should provide a good foundation for the
2356          * future addition of any multi-frontend cx23885 based boards.
2357          */
2358         printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
2359                 port->num_frontends);
2360
2361         for (i = 1; i <= port->num_frontends; i++) {
2362                 struct vb2_queue *q;
2363
2364                 if (vb2_dvb_alloc_frontend(
2365                         &port->frontends, i) == NULL) {
2366                         printk(KERN_ERR "%s() failed to alloc\n", __func__);
2367                         return -ENOMEM;
2368                 }
2369
2370                 fe0 = vb2_dvb_get_frontend(&port->frontends, i);
2371                 if (!fe0)
2372                         return -EINVAL;
2373
2374                 dprintk(1, "%s\n", __func__);
2375                 dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
2376                         dev->board,
2377                         dev->name,
2378                         dev->pci_bus,
2379                         dev->pci_slot);
2380
2381                 err = -ENODEV;
2382
2383                 /* dvb stuff */
2384                 /* We have to init the queue for each frontend on a port. */
2385                 printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name);
2386                 q = &fe0->dvb.dvbq;
2387                 q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
2388                 q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
2389                 q->gfp_flags = GFP_DMA32;
2390                 q->min_buffers_needed = 2;
2391                 q->drv_priv = port;
2392                 q->buf_struct_size = sizeof(struct cx23885_buffer);
2393                 q->ops = &dvb_qops;
2394                 q->mem_ops = &vb2_dma_sg_memops;
2395                 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
2396                 q->lock = &dev->lock;
2397
2398                 err = vb2_queue_init(q);
2399                 if (err < 0)
2400                         return err;
2401         }
2402         err = dvb_register(port);
2403         if (err != 0)
2404                 printk(KERN_ERR "%s() dvb_register failed err = %d\n",
2405                         __func__, err);
2406
2407         return err;
2408 }
2409
2410 int cx23885_dvb_unregister(struct cx23885_tsport *port)
2411 {
2412         struct vb2_dvb_frontend *fe0;
2413         struct i2c_client *client;
2414
2415         /* remove I2C client for CI */
2416         client = port->i2c_client_ci;
2417         if (client) {
2418                 module_put(client->dev.driver->owner);
2419                 i2c_unregister_device(client);
2420         }
2421
2422         /* remove I2C client for SEC */
2423         client = port->i2c_client_sec;
2424         if (client) {
2425                 module_put(client->dev.driver->owner);
2426                 i2c_unregister_device(client);
2427         }
2428
2429         /* remove I2C client for tuner */
2430         client = port->i2c_client_tuner;
2431         if (client) {
2432                 module_put(client->dev.driver->owner);
2433                 i2c_unregister_device(client);
2434         }
2435
2436         /* remove I2C client for demodulator */
2437         client = port->i2c_client_demod;
2438         if (client) {
2439                 module_put(client->dev.driver->owner);
2440                 i2c_unregister_device(client);
2441         }
2442
2443         fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
2444
2445         if (fe0 && fe0->dvb.frontend)
2446                 vb2_dvb_unregister_bus(&port->frontends);
2447
2448         switch (port->dev->board) {
2449         case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
2450                 netup_ci_exit(port);
2451                 break;
2452         case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
2453                 altera_ci_release(port->dev, port->nr);
2454                 break;
2455         }
2456
2457         port->gate_ctrl = NULL;
2458
2459         return 0;
2460 }