Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / i2c / tvp5150.c
1 /*
2  * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
3  *
4  * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5  * This code is placed under the terms of the GNU General Public License v2
6  */
7
8 #include <linux/i2c.h>
9 #include <linux/slab.h>
10 #include <linux/videodev2.h>
11 #include <linux/delay.h>
12 #include <linux/module.h>
13 #include <media/v4l2-device.h>
14 #include <media/tvp5150.h>
15 #include <media/v4l2-ctrls.h>
16
17 #include "tvp5150_reg.h"
18
19 #define TVP5150_H_MAX           720U
20 #define TVP5150_V_MAX_525_60    480U
21 #define TVP5150_V_MAX_OTHERS    576U
22 #define TVP5150_MAX_CROP_LEFT   511
23 #define TVP5150_MAX_CROP_TOP    127
24 #define TVP5150_CROP_SHIFT      2
25
26 MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
27 MODULE_AUTHOR("Mauro Carvalho Chehab");
28 MODULE_LICENSE("GPL");
29
30
31 static int debug;
32 module_param(debug, int, 0644);
33 MODULE_PARM_DESC(debug, "Debug level (0-2)");
34
35 struct tvp5150 {
36         struct v4l2_subdev sd;
37         struct v4l2_ctrl_handler hdl;
38         struct v4l2_rect rect;
39
40         v4l2_std_id norm;       /* Current set standard */
41         u32 input;
42         u32 output;
43         int enable;
44 };
45
46 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
47 {
48         return container_of(sd, struct tvp5150, sd);
49 }
50
51 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
52 {
53         return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
54 }
55
56 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
57 {
58         struct i2c_client *c = v4l2_get_subdevdata(sd);
59         int rc;
60
61         rc = i2c_smbus_read_byte_data(c, addr);
62         if (rc < 0) {
63                 v4l2_err(sd, "i2c i/o error: rc == %d\n", rc);
64                 return rc;
65         }
66
67         v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, rc);
68
69         return rc;
70 }
71
72 static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
73                                  unsigned char value)
74 {
75         struct i2c_client *c = v4l2_get_subdevdata(sd);
76         int rc;
77
78         v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", addr, value);
79         rc = i2c_smbus_write_byte_data(c, addr, value);
80         if (rc < 0)
81                 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d\n", rc);
82 }
83
84 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
85                                 const u8 end, int max_line)
86 {
87         int i = 0;
88
89         while (init != (u8)(end + 1)) {
90                 if ((i % max_line) == 0) {
91                         if (i > 0)
92                                 printk("\n");
93                         printk("tvp5150: %s reg 0x%02x = ", s, init);
94                 }
95                 printk("%02x ", tvp5150_read(sd, init));
96
97                 init++;
98                 i++;
99         }
100         printk("\n");
101 }
102
103 static int tvp5150_log_status(struct v4l2_subdev *sd)
104 {
105         printk("tvp5150: Video input source selection #1 = 0x%02x\n",
106                         tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
107         printk("tvp5150: Analog channel controls = 0x%02x\n",
108                         tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
109         printk("tvp5150: Operation mode controls = 0x%02x\n",
110                         tvp5150_read(sd, TVP5150_OP_MODE_CTL));
111         printk("tvp5150: Miscellaneous controls = 0x%02x\n",
112                         tvp5150_read(sd, TVP5150_MISC_CTL));
113         printk("tvp5150: Autoswitch mask= 0x%02x\n",
114                         tvp5150_read(sd, TVP5150_AUTOSW_MSK));
115         printk("tvp5150: Color killer threshold control = 0x%02x\n",
116                         tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
117         printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
118                         tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
119                         tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
120                         tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
121         printk("tvp5150: Brightness control = 0x%02x\n",
122                         tvp5150_read(sd, TVP5150_BRIGHT_CTL));
123         printk("tvp5150: Color saturation control = 0x%02x\n",
124                         tvp5150_read(sd, TVP5150_SATURATION_CTL));
125         printk("tvp5150: Hue control = 0x%02x\n",
126                         tvp5150_read(sd, TVP5150_HUE_CTL));
127         printk("tvp5150: Contrast control = 0x%02x\n",
128                         tvp5150_read(sd, TVP5150_CONTRAST_CTL));
129         printk("tvp5150: Outputs and data rates select = 0x%02x\n",
130                         tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
131         printk("tvp5150: Configuration shared pins = 0x%02x\n",
132                         tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
133         printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
134                         tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
135                         tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
136         printk("tvp5150: Active video cropping stop  = 0x%02x%02x\n",
137                         tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
138                         tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
139         printk("tvp5150: Genlock/RTC = 0x%02x\n",
140                         tvp5150_read(sd, TVP5150_GENLOCK));
141         printk("tvp5150: Horizontal sync start = 0x%02x\n",
142                         tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
143         printk("tvp5150: Vertical blanking start = 0x%02x\n",
144                         tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
145         printk("tvp5150: Vertical blanking stop = 0x%02x\n",
146                         tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
147         printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
148                         tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
149                         tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
150         printk("tvp5150: Interrupt reset register B = 0x%02x\n",
151                         tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
152         printk("tvp5150: Interrupt enable register B = 0x%02x\n",
153                         tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
154         printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
155                         tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
156         printk("tvp5150: Video standard = 0x%02x\n",
157                         tvp5150_read(sd, TVP5150_VIDEO_STD));
158         printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
159                         tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
160                         tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
161         printk("tvp5150: Macrovision on counter = 0x%02x\n",
162                         tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
163         printk("tvp5150: Macrovision off counter = 0x%02x\n",
164                         tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
165         printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
166                         (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
167         printk("tvp5150: Device ID = %02x%02x\n",
168                         tvp5150_read(sd, TVP5150_MSB_DEV_ID),
169                         tvp5150_read(sd, TVP5150_LSB_DEV_ID));
170         printk("tvp5150: ROM version = (hex) %02x.%02x\n",
171                         tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
172                         tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
173         printk("tvp5150: Vertical line count = 0x%02x%02x\n",
174                         tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
175                         tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
176         printk("tvp5150: Interrupt status register B = 0x%02x\n",
177                         tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
178         printk("tvp5150: Interrupt active register B = 0x%02x\n",
179                         tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
180         printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
181                         tvp5150_read(sd, TVP5150_STATUS_REG_1),
182                         tvp5150_read(sd, TVP5150_STATUS_REG_2),
183                         tvp5150_read(sd, TVP5150_STATUS_REG_3),
184                         tvp5150_read(sd, TVP5150_STATUS_REG_4),
185                         tvp5150_read(sd, TVP5150_STATUS_REG_5));
186
187         dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
188                         TVP5150_TELETEXT_FIL1_END, 8);
189         dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
190                         TVP5150_TELETEXT_FIL2_END, 8);
191
192         printk("tvp5150: Teletext filter enable = 0x%02x\n",
193                         tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
194         printk("tvp5150: Interrupt status register A = 0x%02x\n",
195                         tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
196         printk("tvp5150: Interrupt enable register A = 0x%02x\n",
197                         tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
198         printk("tvp5150: Interrupt configuration = 0x%02x\n",
199                         tvp5150_read(sd, TVP5150_INT_CONF));
200         printk("tvp5150: VDP status register = 0x%02x\n",
201                         tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
202         printk("tvp5150: FIFO word count = 0x%02x\n",
203                         tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
204         printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
205                         tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
206         printk("tvp5150: FIFO reset = 0x%02x\n",
207                         tvp5150_read(sd, TVP5150_FIFO_RESET));
208         printk("tvp5150: Line number interrupt = 0x%02x\n",
209                         tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
210         printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
211                         tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
212                         tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
213         printk("tvp5150: FIFO output control = 0x%02x\n",
214                         tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
215         printk("tvp5150: Full field enable = 0x%02x\n",
216                         tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
217         printk("tvp5150: Full field mode register = 0x%02x\n",
218                         tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
219
220         dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,
221                         TVP5150_CC_DATA_END, 8);
222
223         dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,
224                         TVP5150_WSS_DATA_END, 8);
225
226         dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,
227                         TVP5150_VPS_DATA_END, 8);
228
229         dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,
230                         TVP5150_VITC_DATA_END, 10);
231
232         dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,
233                         TVP5150_LINE_MODE_END, 8);
234         return 0;
235 }
236
237 /****************************************************************************
238                         Basic functions
239  ****************************************************************************/
240
241 static inline void tvp5150_selmux(struct v4l2_subdev *sd)
242 {
243         int opmode = 0;
244         struct tvp5150 *decoder = to_tvp5150(sd);
245         int input = 0;
246         int val;
247
248         if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable)
249                 input = 8;
250
251         switch (decoder->input) {
252         case TVP5150_COMPOSITE1:
253                 input |= 2;
254                 /* fall through */
255         case TVP5150_COMPOSITE0:
256                 break;
257         case TVP5150_SVIDEO:
258         default:
259                 input |= 1;
260                 break;
261         }
262
263         v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
264                         "=> tvp5150 input=%i, opmode=%i\n",
265                         decoder->input, decoder->output,
266                         input, opmode);
267
268         tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
269         tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
270
271         /* Svideo should enable YCrCb output and disable GPCL output
272          * For Composite and TV, it should be the reverse
273          */
274         val = tvp5150_read(sd, TVP5150_MISC_CTL);
275         if (val < 0) {
276                 v4l2_err(sd, "%s: failed with error = %d\n", __func__, val);
277                 return;
278         }
279
280         if (decoder->input == TVP5150_SVIDEO)
281                 val = (val & ~0x40) | 0x10;
282         else
283                 val = (val & ~0x10) | 0x40;
284         tvp5150_write(sd, TVP5150_MISC_CTL, val);
285 };
286
287 struct i2c_reg_value {
288         unsigned char reg;
289         unsigned char value;
290 };
291
292 /* Default values as sugested at TVP5150AM1 datasheet */
293 static const struct i2c_reg_value tvp5150_init_default[] = {
294         { /* 0x00 */
295                 TVP5150_VD_IN_SRC_SEL_1,0x00
296         },
297         { /* 0x01 */
298                 TVP5150_ANAL_CHL_CTL,0x15
299         },
300         { /* 0x02 */
301                 TVP5150_OP_MODE_CTL,0x00
302         },
303         { /* 0x03 */
304                 TVP5150_MISC_CTL,0x01
305         },
306         { /* 0x06 */
307                 TVP5150_COLOR_KIL_THSH_CTL,0x10
308         },
309         { /* 0x07 */
310                 TVP5150_LUMA_PROC_CTL_1,0x60
311         },
312         { /* 0x08 */
313                 TVP5150_LUMA_PROC_CTL_2,0x00
314         },
315         { /* 0x09 */
316                 TVP5150_BRIGHT_CTL,0x80
317         },
318         { /* 0x0a */
319                 TVP5150_SATURATION_CTL,0x80
320         },
321         { /* 0x0b */
322                 TVP5150_HUE_CTL,0x00
323         },
324         { /* 0x0c */
325                 TVP5150_CONTRAST_CTL,0x80
326         },
327         { /* 0x0d */
328                 TVP5150_DATA_RATE_SEL,0x47
329         },
330         { /* 0x0e */
331                 TVP5150_LUMA_PROC_CTL_3,0x00
332         },
333         { /* 0x0f */
334                 TVP5150_CONF_SHARED_PIN,0x08
335         },
336         { /* 0x11 */
337                 TVP5150_ACT_VD_CROP_ST_MSB,0x00
338         },
339         { /* 0x12 */
340                 TVP5150_ACT_VD_CROP_ST_LSB,0x00
341         },
342         { /* 0x13 */
343                 TVP5150_ACT_VD_CROP_STP_MSB,0x00
344         },
345         { /* 0x14 */
346                 TVP5150_ACT_VD_CROP_STP_LSB,0x00
347         },
348         { /* 0x15 */
349                 TVP5150_GENLOCK,0x01
350         },
351         { /* 0x16 */
352                 TVP5150_HORIZ_SYNC_START,0x80
353         },
354         { /* 0x18 */
355                 TVP5150_VERT_BLANKING_START,0x00
356         },
357         { /* 0x19 */
358                 TVP5150_VERT_BLANKING_STOP,0x00
359         },
360         { /* 0x1a */
361                 TVP5150_CHROMA_PROC_CTL_1,0x0c
362         },
363         { /* 0x1b */
364                 TVP5150_CHROMA_PROC_CTL_2,0x14
365         },
366         { /* 0x1c */
367                 TVP5150_INT_RESET_REG_B,0x00
368         },
369         { /* 0x1d */
370                 TVP5150_INT_ENABLE_REG_B,0x00
371         },
372         { /* 0x1e */
373                 TVP5150_INTT_CONFIG_REG_B,0x00
374         },
375         { /* 0x28 */
376                 TVP5150_VIDEO_STD,0x00
377         },
378         { /* 0x2e */
379                 TVP5150_MACROVISION_ON_CTR,0x0f
380         },
381         { /* 0x2f */
382                 TVP5150_MACROVISION_OFF_CTR,0x01
383         },
384         { /* 0xbb */
385                 TVP5150_TELETEXT_FIL_ENA,0x00
386         },
387         { /* 0xc0 */
388                 TVP5150_INT_STATUS_REG_A,0x00
389         },
390         { /* 0xc1 */
391                 TVP5150_INT_ENABLE_REG_A,0x00
392         },
393         { /* 0xc2 */
394                 TVP5150_INT_CONF,0x04
395         },
396         { /* 0xc8 */
397                 TVP5150_FIFO_INT_THRESHOLD,0x80
398         },
399         { /* 0xc9 */
400                 TVP5150_FIFO_RESET,0x00
401         },
402         { /* 0xca */
403                 TVP5150_LINE_NUMBER_INT,0x00
404         },
405         { /* 0xcb */
406                 TVP5150_PIX_ALIGN_REG_LOW,0x4e
407         },
408         { /* 0xcc */
409                 TVP5150_PIX_ALIGN_REG_HIGH,0x00
410         },
411         { /* 0xcd */
412                 TVP5150_FIFO_OUT_CTRL,0x01
413         },
414         { /* 0xcf */
415                 TVP5150_FULL_FIELD_ENA,0x00
416         },
417         { /* 0xd0 */
418                 TVP5150_LINE_MODE_INI,0x00
419         },
420         { /* 0xfc */
421                 TVP5150_FULL_FIELD_MODE_REG,0x7f
422         },
423         { /* end of data */
424                 0xff,0xff
425         }
426 };
427
428 /* Default values as sugested at TVP5150AM1 datasheet */
429 static const struct i2c_reg_value tvp5150_init_enable[] = {
430         {
431                 TVP5150_CONF_SHARED_PIN, 2
432         },{     /* Automatic offset and AGC enabled */
433                 TVP5150_ANAL_CHL_CTL, 0x15
434         },{     /* Activate YCrCb output 0x9 or 0xd ? */
435                 TVP5150_MISC_CTL, 0x6f
436         },{     /* Activates video std autodetection for all standards */
437                 TVP5150_AUTOSW_MSK, 0x0
438         },{     /* Default format: 0x47. For 4:2:2: 0x40 */
439                 TVP5150_DATA_RATE_SEL, 0x47
440         },{
441                 TVP5150_CHROMA_PROC_CTL_1, 0x0c
442         },{
443                 TVP5150_CHROMA_PROC_CTL_2, 0x54
444         },{     /* Non documented, but initialized on WinTV USB2 */
445                 0x27, 0x20
446         },{
447                 0xff,0xff
448         }
449 };
450
451 struct tvp5150_vbi_type {
452         unsigned int vbi_type;
453         unsigned int ini_line;
454         unsigned int end_line;
455         unsigned int by_field :1;
456 };
457
458 struct i2c_vbi_ram_value {
459         u16 reg;
460         struct tvp5150_vbi_type type;
461         unsigned char values[16];
462 };
463
464 /* This struct have the values for each supported VBI Standard
465  * by
466  tvp5150_vbi_types should follow the same order as vbi_ram_default
467  * value 0 means rom position 0x10, value 1 means rom position 0x30
468  * and so on. There are 16 possible locations from 0 to 15.
469  */
470
471 static struct i2c_vbi_ram_value vbi_ram_default[] =
472 {
473         /* FIXME: Current api doesn't handle all VBI types, those not
474            yet supported are placed under #if 0 */
475 #if 0
476         {0x010, /* Teletext, SECAM, WST System A */
477                 {V4L2_SLICED_TELETEXT_SECAM,6,23,1},
478                 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
479                   0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
480         },
481 #endif
482         {0x030, /* Teletext, PAL, WST System B */
483                 {V4L2_SLICED_TELETEXT_B,6,22,1},
484                 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
485                   0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
486         },
487 #if 0
488         {0x050, /* Teletext, PAL, WST System C */
489                 {V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
490                 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
491                   0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
492         },
493         {0x070, /* Teletext, NTSC, WST System B */
494                 {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
495                 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
496                   0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
497         },
498         {0x090, /* Tetetext, NTSC NABTS System C */
499                 {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
500                 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
501                   0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
502         },
503         {0x0b0, /* Teletext, NTSC-J, NABTS System D */
504                 {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
505                 { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
506                   0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
507         },
508         {0x0d0, /* Closed Caption, PAL/SECAM */
509                 {V4L2_SLICED_CAPTION_625,22,22,1},
510                 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
511                   0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
512         },
513 #endif
514         {0x0f0, /* Closed Caption, NTSC */
515                 {V4L2_SLICED_CAPTION_525,21,21,1},
516                 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
517                   0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
518         },
519         {0x110, /* Wide Screen Signal, PAL/SECAM */
520                 {V4L2_SLICED_WSS_625,23,23,1},
521                 { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
522                   0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
523         },
524 #if 0
525         {0x130, /* Wide Screen Signal, NTSC C */
526                 {V4L2_SLICED_WSS_525,20,20,1},
527                 { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
528                   0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
529         },
530         {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
531                 {V4l2_SLICED_VITC_625,6,22,0},
532                 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
533                   0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
534         },
535         {0x170, /* Vertical Interval Timecode (VITC), NTSC */
536                 {V4l2_SLICED_VITC_525,10,20,0},
537                 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
538                   0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
539         },
540 #endif
541         {0x190, /* Video Program System (VPS), PAL */
542                 {V4L2_SLICED_VPS,16,16,0},
543                 { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
544                   0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
545         },
546         /* 0x1d0 User programmable */
547
548         /* End of struct */
549         { (u16)-1 }
550 };
551
552 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
553                                 const struct i2c_reg_value *regs)
554 {
555         while (regs->reg != 0xff) {
556                 tvp5150_write(sd, regs->reg, regs->value);
557                 regs++;
558         }
559         return 0;
560 }
561
562 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
563                                 const struct i2c_vbi_ram_value *regs)
564 {
565         unsigned int i;
566
567         /* Disable Full Field */
568         tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
569
570         /* Before programming, Line mode should be at 0xff */
571         for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
572                 tvp5150_write(sd, i, 0xff);
573
574         /* Load Ram Table */
575         while (regs->reg != (u16)-1) {
576                 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
577                 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
578
579                 for (i = 0; i < 16; i++)
580                         tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
581
582                 regs++;
583         }
584         return 0;
585 }
586
587 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
588 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
589                                 struct v4l2_sliced_vbi_cap *cap)
590 {
591         const struct i2c_vbi_ram_value *regs = vbi_ram_default;
592         int line;
593
594         v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
595         memset(cap, 0, sizeof *cap);
596
597         while (regs->reg != (u16)-1 ) {
598                 for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
599                         cap->service_lines[0][line] |= regs->type.vbi_type;
600                 }
601                 cap->service_set |= regs->type.vbi_type;
602
603                 regs++;
604         }
605         return 0;
606 }
607
608 /* Set vbi processing
609  * type - one of tvp5150_vbi_types
610  * line - line to gather data
611  * fields: bit 0 field1, bit 1, field2
612  * flags (default=0xf0) is a bitmask, were set means:
613  *      bit 7: enable filtering null bytes on CC
614  *      bit 6: send data also to FIFO
615  *      bit 5: don't allow data with errors on FIFO
616  *      bit 4: enable ECC when possible
617  * pix_align = pix alignment:
618  *      LSB = field1
619  *      MSB = field2
620  */
621 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
622                         const struct i2c_vbi_ram_value *regs,
623                         unsigned int type,u8 flags, int line,
624                         const int fields)
625 {
626         struct tvp5150 *decoder = to_tvp5150(sd);
627         v4l2_std_id std = decoder->norm;
628         u8 reg;
629         int pos=0;
630
631         if (std == V4L2_STD_ALL) {
632                 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
633                 return 0;
634         } else if (std & V4L2_STD_625_50) {
635                 /* Don't follow NTSC Line number convension */
636                 line += 3;
637         }
638
639         if (line<6||line>27)
640                 return 0;
641
642         while (regs->reg != (u16)-1 ) {
643                 if ((type & regs->type.vbi_type) &&
644                     (line>=regs->type.ini_line) &&
645                     (line<=regs->type.end_line)) {
646                         type=regs->type.vbi_type;
647                         break;
648                 }
649
650                 regs++;
651                 pos++;
652         }
653         if (regs->reg == (u16)-1)
654                 return 0;
655
656         type=pos | (flags & 0xf0);
657         reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
658
659         if (fields&1) {
660                 tvp5150_write(sd, reg, type);
661         }
662
663         if (fields&2) {
664                 tvp5150_write(sd, reg+1, type);
665         }
666
667         return type;
668 }
669
670 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
671                         const struct i2c_vbi_ram_value *regs, int line)
672 {
673         struct tvp5150 *decoder = to_tvp5150(sd);
674         v4l2_std_id std = decoder->norm;
675         u8 reg;
676         int pos, type = 0;
677         int i, ret = 0;
678
679         if (std == V4L2_STD_ALL) {
680                 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
681                 return 0;
682         } else if (std & V4L2_STD_625_50) {
683                 /* Don't follow NTSC Line number convension */
684                 line += 3;
685         }
686
687         if (line < 6 || line > 27)
688                 return 0;
689
690         reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
691
692         for (i = 0; i <= 1; i++) {
693                 ret = tvp5150_read(sd, reg + i);
694                 if (ret < 0) {
695                         v4l2_err(sd, "%s: failed with error = %d\n",
696                                  __func__, ret);
697                         return 0;
698                 }
699                 pos = ret & 0x0f;
700                 if (pos < 0x0f)
701                         type |= regs[pos].type.vbi_type;
702         }
703
704         return type;
705 }
706
707 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
708 {
709         struct tvp5150 *decoder = to_tvp5150(sd);
710         int fmt = 0;
711
712         decoder->norm = std;
713
714         /* First tests should be against specific std */
715
716         if (std == V4L2_STD_NTSC_443) {
717                 fmt = VIDEO_STD_NTSC_4_43_BIT;
718         } else if (std == V4L2_STD_PAL_M) {
719                 fmt = VIDEO_STD_PAL_M_BIT;
720         } else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {
721                 fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
722         } else {
723                 /* Then, test against generic ones */
724                 if (std & V4L2_STD_NTSC)
725                         fmt = VIDEO_STD_NTSC_MJ_BIT;
726                 else if (std & V4L2_STD_PAL)
727                         fmt = VIDEO_STD_PAL_BDGHIN_BIT;
728                 else if (std & V4L2_STD_SECAM)
729                         fmt = VIDEO_STD_SECAM_BIT;
730         }
731
732         v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
733         tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
734         return 0;
735 }
736
737 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
738 {
739         struct tvp5150 *decoder = to_tvp5150(sd);
740
741         if (decoder->norm == std)
742                 return 0;
743
744         /* Change cropping height limits */
745         if (std & V4L2_STD_525_60)
746                 decoder->rect.height = TVP5150_V_MAX_525_60;
747         else
748                 decoder->rect.height = TVP5150_V_MAX_OTHERS;
749
750
751         return tvp5150_set_std(sd, std);
752 }
753
754 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
755 {
756         struct tvp5150 *decoder = to_tvp5150(sd);
757
758         /* Initializes TVP5150 to its default values */
759         tvp5150_write_inittab(sd, tvp5150_init_default);
760
761         /* Initializes VDP registers */
762         tvp5150_vdp_init(sd, vbi_ram_default);
763
764         /* Selects decoder input */
765         tvp5150_selmux(sd);
766
767         /* Initializes TVP5150 to stream enabled values */
768         tvp5150_write_inittab(sd, tvp5150_init_enable);
769
770         /* Initialize image preferences */
771         v4l2_ctrl_handler_setup(&decoder->hdl);
772
773         tvp5150_set_std(sd, decoder->norm);
774         return 0;
775 };
776
777 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
778 {
779         struct v4l2_subdev *sd = to_sd(ctrl);
780
781         switch (ctrl->id) {
782         case V4L2_CID_BRIGHTNESS:
783                 tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
784                 return 0;
785         case V4L2_CID_CONTRAST:
786                 tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
787                 return 0;
788         case V4L2_CID_SATURATION:
789                 tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
790                 return 0;
791         case V4L2_CID_HUE:
792                 tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
793                 return 0;
794         }
795         return -EINVAL;
796 }
797
798 static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
799 {
800         int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
801
802         switch (val & 0x0F) {
803         case 0x01:
804                 return V4L2_STD_NTSC;
805         case 0x03:
806                 return V4L2_STD_PAL;
807         case 0x05:
808                 return V4L2_STD_PAL_M;
809         case 0x07:
810                 return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
811         case 0x09:
812                 return V4L2_STD_NTSC_443;
813         case 0xb:
814                 return V4L2_STD_SECAM;
815         default:
816                 return V4L2_STD_UNKNOWN;
817         }
818 }
819
820 static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
821                                                 u32 *code)
822 {
823         if (index)
824                 return -EINVAL;
825
826         *code = MEDIA_BUS_FMT_UYVY8_2X8;
827         return 0;
828 }
829
830 static int tvp5150_mbus_fmt(struct v4l2_subdev *sd,
831                             struct v4l2_mbus_framefmt *f)
832 {
833         struct tvp5150 *decoder = to_tvp5150(sd);
834
835         if (f == NULL)
836                 return -EINVAL;
837
838         tvp5150_reset(sd, 0);
839
840         f->width = decoder->rect.width;
841         f->height = decoder->rect.height;
842
843         f->code = MEDIA_BUS_FMT_UYVY8_2X8;
844         f->field = V4L2_FIELD_SEQ_TB;
845         f->colorspace = V4L2_COLORSPACE_SMPTE170M;
846
847         v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
848                         f->height);
849         return 0;
850 }
851
852 static int tvp5150_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a)
853 {
854         struct v4l2_rect rect = a->c;
855         struct tvp5150 *decoder = to_tvp5150(sd);
856         v4l2_std_id std;
857         unsigned int hmax;
858
859         v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n",
860                 __func__, rect.left, rect.top, rect.width, rect.height);
861
862         if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
863                 return -EINVAL;
864
865         /* tvp5150 has some special limits */
866         rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
867         rect.width = clamp_t(unsigned int, rect.width,
868                              TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
869                              TVP5150_H_MAX - rect.left);
870         rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
871
872         /* Calculate height based on current standard */
873         if (decoder->norm == V4L2_STD_ALL)
874                 std = tvp5150_read_std(sd);
875         else
876                 std = decoder->norm;
877
878         if (std & V4L2_STD_525_60)
879                 hmax = TVP5150_V_MAX_525_60;
880         else
881                 hmax = TVP5150_V_MAX_OTHERS;
882
883         rect.height = clamp_t(unsigned int, rect.height,
884                               hmax - TVP5150_MAX_CROP_TOP - rect.top,
885                               hmax - rect.top);
886
887         tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
888         tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
889                       rect.top + rect.height - hmax);
890         tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
891                       rect.left >> TVP5150_CROP_SHIFT);
892         tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
893                       rect.left | (1 << TVP5150_CROP_SHIFT));
894         tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
895                       (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
896                       TVP5150_CROP_SHIFT);
897         tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
898                       rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
899
900         decoder->rect = rect;
901
902         return 0;
903 }
904
905 static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
906 {
907         struct tvp5150 *decoder = to_tvp5150(sd);
908
909         a->c    = decoder->rect;
910         a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
911
912         return 0;
913 }
914
915 static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
916 {
917         struct tvp5150 *decoder = to_tvp5150(sd);
918         v4l2_std_id std;
919
920         if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
921                 return -EINVAL;
922
923         a->bounds.left                  = 0;
924         a->bounds.top                   = 0;
925         a->bounds.width                 = TVP5150_H_MAX;
926
927         /* Calculate height based on current standard */
928         if (decoder->norm == V4L2_STD_ALL)
929                 std = tvp5150_read_std(sd);
930         else
931                 std = decoder->norm;
932
933         if (std & V4L2_STD_525_60)
934                 a->bounds.height = TVP5150_V_MAX_525_60;
935         else
936                 a->bounds.height = TVP5150_V_MAX_OTHERS;
937
938         a->defrect                      = a->bounds;
939         a->pixelaspect.numerator        = 1;
940         a->pixelaspect.denominator      = 1;
941
942         return 0;
943 }
944
945 /****************************************************************************
946                         I2C Command
947  ****************************************************************************/
948
949 static int tvp5150_s_routing(struct v4l2_subdev *sd,
950                              u32 input, u32 output, u32 config)
951 {
952         struct tvp5150 *decoder = to_tvp5150(sd);
953
954         decoder->input = input;
955         decoder->output = output;
956         tvp5150_selmux(sd);
957         return 0;
958 }
959
960 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
961 {
962         /* this is for capturing 36 raw vbi lines
963            if there's a way to cut off the beginning 2 vbi lines
964            with the tvp5150 then the vbi line count could be lowered
965            to 17 lines/field again, although I couldn't find a register
966            which could do that cropping */
967         if (fmt->sample_format == V4L2_PIX_FMT_GREY)
968                 tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
969         if (fmt->count[0] == 18 && fmt->count[1] == 18) {
970                 tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
971                 tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
972         }
973         return 0;
974 }
975
976 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
977 {
978         int i;
979
980         if (svbi->service_set != 0) {
981                 for (i = 0; i <= 23; i++) {
982                         svbi->service_lines[1][i] = 0;
983                         svbi->service_lines[0][i] =
984                                 tvp5150_set_vbi(sd, vbi_ram_default,
985                                        svbi->service_lines[0][i], 0xf0, i, 3);
986                 }
987                 /* Enables FIFO */
988                 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
989         } else {
990                 /* Disables FIFO*/
991                 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
992
993                 /* Disable Full Field */
994                 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
995
996                 /* Disable Line modes */
997                 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
998                         tvp5150_write(sd, i, 0xff);
999         }
1000         return 0;
1001 }
1002
1003 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1004 {
1005         int i, mask = 0;
1006
1007         memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
1008
1009         for (i = 0; i <= 23; i++) {
1010                 svbi->service_lines[0][i] =
1011                         tvp5150_get_vbi(sd, vbi_ram_default, i);
1012                 mask |= svbi->service_lines[0][i];
1013         }
1014         svbi->service_set = mask;
1015         return 0;
1016 }
1017
1018 #ifdef CONFIG_VIDEO_ADV_DEBUG
1019 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1020 {
1021         int res;
1022
1023         res = tvp5150_read(sd, reg->reg & 0xff);
1024         if (res < 0) {
1025                 v4l2_err(sd, "%s: failed with error = %d\n", __func__, res);
1026                 return res;
1027         }
1028
1029         reg->val = res;
1030         reg->size = 1;
1031         return 0;
1032 }
1033
1034 static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
1035 {
1036         tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
1037         return 0;
1038 }
1039 #endif
1040
1041 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1042 {
1043         int status = tvp5150_read(sd, 0x88);
1044
1045         vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
1046         return 0;
1047 }
1048
1049 /* ----------------------------------------------------------------------- */
1050
1051 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
1052         .s_ctrl = tvp5150_s_ctrl,
1053 };
1054
1055 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
1056         .log_status = tvp5150_log_status,
1057         .reset = tvp5150_reset,
1058 #ifdef CONFIG_VIDEO_ADV_DEBUG
1059         .g_register = tvp5150_g_register,
1060         .s_register = tvp5150_s_register,
1061 #endif
1062 };
1063
1064 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
1065         .g_tuner = tvp5150_g_tuner,
1066 };
1067
1068 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
1069         .s_std = tvp5150_s_std,
1070         .s_routing = tvp5150_s_routing,
1071         .enum_mbus_fmt = tvp5150_enum_mbus_fmt,
1072         .s_mbus_fmt = tvp5150_mbus_fmt,
1073         .try_mbus_fmt = tvp5150_mbus_fmt,
1074         .g_mbus_fmt = tvp5150_mbus_fmt,
1075         .s_crop = tvp5150_s_crop,
1076         .g_crop = tvp5150_g_crop,
1077         .cropcap = tvp5150_cropcap,
1078 };
1079
1080 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1081         .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1082         .g_sliced_fmt = tvp5150_g_sliced_fmt,
1083         .s_sliced_fmt = tvp5150_s_sliced_fmt,
1084         .s_raw_fmt = tvp5150_s_raw_fmt,
1085 };
1086
1087 static const struct v4l2_subdev_ops tvp5150_ops = {
1088         .core = &tvp5150_core_ops,
1089         .tuner = &tvp5150_tuner_ops,
1090         .video = &tvp5150_video_ops,
1091         .vbi = &tvp5150_vbi_ops,
1092 };
1093
1094
1095 /****************************************************************************
1096                         I2C Client & Driver
1097  ****************************************************************************/
1098
1099 static int tvp5150_probe(struct i2c_client *c,
1100                          const struct i2c_device_id *id)
1101 {
1102         struct tvp5150 *core;
1103         struct v4l2_subdev *sd;
1104         int tvp5150_id[4];
1105         int i, res;
1106
1107         /* Check if the adapter supports the needed features */
1108         if (!i2c_check_functionality(c->adapter,
1109              I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1110                 return -EIO;
1111
1112         core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
1113         if (!core)
1114                 return -ENOMEM;
1115         sd = &core->sd;
1116         v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
1117
1118         /* 
1119          * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
1120          * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER 
1121          */
1122         for (i = 0; i < 4; i++) {
1123                 res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
1124                 if (res < 0)
1125                         return res;
1126                 tvp5150_id[i] = res;
1127         }
1128
1129         v4l_info(c, "chip found @ 0x%02x (%s)\n",
1130                  c->addr << 1, c->adapter->name);
1131
1132         if (tvp5150_id[2] == 4 && tvp5150_id[3] == 0) { /* Is TVP5150AM1 */
1133                 v4l2_info(sd, "tvp%02x%02xam1 detected.\n",
1134                           tvp5150_id[0], tvp5150_id[1]);
1135
1136                 /* ITU-T BT.656.4 timing */
1137                 tvp5150_write(sd, TVP5150_REV_SELECT, 0);
1138         } else {
1139                 /* Is TVP5150A */
1140                 if (tvp5150_id[2] == 3 || tvp5150_id[3] == 0x21) {
1141                         v4l2_info(sd, "tvp%02x%02xa detected.\n",
1142                                   tvp5150_id[0], tvp5150_id[1]);
1143                 } else {
1144                         v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
1145                                   tvp5150_id[0], tvp5150_id[1]);
1146                         v4l2_info(sd, "*** Rom ver is %d.%d\n",
1147                                   tvp5150_id[2], tvp5150_id[3]);
1148                 }
1149         }
1150
1151         core->norm = V4L2_STD_ALL;      /* Default is autodetect */
1152         core->input = TVP5150_COMPOSITE1;
1153         core->enable = 1;
1154
1155         v4l2_ctrl_handler_init(&core->hdl, 4);
1156         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1157                         V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1158         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1159                         V4L2_CID_CONTRAST, 0, 255, 1, 128);
1160         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1161                         V4L2_CID_SATURATION, 0, 255, 1, 128);
1162         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1163                         V4L2_CID_HUE, -128, 127, 1, 0);
1164         sd->ctrl_handler = &core->hdl;
1165         if (core->hdl.error) {
1166                 res = core->hdl.error;
1167                 v4l2_ctrl_handler_free(&core->hdl);
1168                 return res;
1169         }
1170         v4l2_ctrl_handler_setup(&core->hdl);
1171
1172         /* Default is no cropping */
1173         core->rect.top = 0;
1174         if (tvp5150_read_std(sd) & V4L2_STD_525_60)
1175                 core->rect.height = TVP5150_V_MAX_525_60;
1176         else
1177                 core->rect.height = TVP5150_V_MAX_OTHERS;
1178         core->rect.left = 0;
1179         core->rect.width = TVP5150_H_MAX;
1180
1181         if (debug > 1)
1182                 tvp5150_log_status(sd);
1183         return 0;
1184 }
1185
1186 static int tvp5150_remove(struct i2c_client *c)
1187 {
1188         struct v4l2_subdev *sd = i2c_get_clientdata(c);
1189         struct tvp5150 *decoder = to_tvp5150(sd);
1190
1191         v4l2_dbg(1, debug, sd,
1192                 "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1193                 c->addr << 1);
1194
1195         v4l2_device_unregister_subdev(sd);
1196         v4l2_ctrl_handler_free(&decoder->hdl);
1197         return 0;
1198 }
1199
1200 /* ----------------------------------------------------------------------- */
1201
1202 static const struct i2c_device_id tvp5150_id[] = {
1203         { "tvp5150", 0 },
1204         { }
1205 };
1206 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1207
1208 static struct i2c_driver tvp5150_driver = {
1209         .driver = {
1210                 .owner  = THIS_MODULE,
1211                 .name   = "tvp5150",
1212         },
1213         .probe          = tvp5150_probe,
1214         .remove         = tvp5150_remove,
1215         .id_table       = tvp5150_id,
1216 };
1217
1218 module_i2c_driver(tvp5150_driver);