Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / i2c / smiapp / smiapp-quirk.c
1 /*
2  * drivers/media/i2c/smiapp/smiapp-quirk.c
3  *
4  * Generic driver for SMIA/SMIA++ compliant camera modules
5  *
6  * Copyright (C) 2011--2012 Nokia Corporation
7  * Contact: Sakari Ailus <sakari.ailus@iki.fi>
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License
11  * version 2 as published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  */
18
19 #include <linux/delay.h>
20
21 #include "smiapp.h"
22
23 static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
24 {
25         return smiapp_write(sensor, SMIAPP_REG_MK_U8(reg), val);
26 }
27
28 static int smiapp_write_8s(struct smiapp_sensor *sensor,
29                            struct smiapp_reg_8 *regs, int len)
30 {
31         struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
32         int rval;
33
34         for (; len > 0; len--, regs++) {
35                 rval = smiapp_write_8(sensor, regs->reg, regs->val);
36                 if (rval < 0) {
37                         dev_err(&client->dev,
38                                 "error %d writing reg 0x%4.4x, val 0x%2.2x",
39                                 rval, regs->reg, regs->val);
40                         return rval;
41                 }
42         }
43
44         return 0;
45 }
46
47 void smiapp_replace_limit(struct smiapp_sensor *sensor,
48                           u32 limit, u32 val)
49 {
50         struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
51
52         dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
53                 smiapp_reg_limits[limit].addr,
54                 smiapp_reg_limits[limit].what, val, val);
55         sensor->limits[limit] = val;
56 }
57
58 static int jt8ew9_limits(struct smiapp_sensor *sensor)
59 {
60         if (sensor->minfo.revision_number_major < 0x03)
61                 sensor->frame_skip = 1;
62
63         /* Below 24 gain doesn't have effect at all, */
64         /* but ~59 is needed for full dynamic range */
65         smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
66         smiapp_replace_limit(
67                 sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
68
69         return 0;
70 }
71
72 static int jt8ew9_post_poweron(struct smiapp_sensor *sensor)
73 {
74         struct smiapp_reg_8 regs[] = {
75                 { 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */
76                 { 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
77                 { 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
78                 { 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */
79                 { 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
80                 { 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
81                 { 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
82                 { 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
83                 { 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */
84                 { 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
85                 { 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
86                 { 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
87                 { 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
88                 { 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
89                 { 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
90                 { 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
91                 { 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
92                 { 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
93                 { 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */
94                 { 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */
95                 { 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */
96                 { 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
97                 { 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
98                 /* Taken from v03. No idea what the rest are. */
99                 { 0x32e0, 0x05 },
100                 { 0x32e1, 0x05 },
101                 { 0x32e2, 0x04 },
102                 { 0x32e5, 0x04 },
103                 { 0x32e6, 0x04 },
104
105         };
106
107         return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
108 }
109
110 const struct smiapp_quirk smiapp_jt8ew9_quirk = {
111         .limits = jt8ew9_limits,
112         .post_poweron = jt8ew9_post_poweron,
113 };
114
115 static int imx125es_post_poweron(struct smiapp_sensor *sensor)
116 {
117         /* Taken from v02. No idea what the other two are. */
118         struct smiapp_reg_8 regs[] = {
119                 /*
120                  * 0x3302: clk during frame blanking:
121                  * 0x00 - HS mode, 0x01 - LP11
122                  */
123                 { 0x3302, 0x01 },
124                 { 0x302d, 0x00 },
125                 { 0x3b08, 0x8c },
126         };
127
128         return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
129 }
130
131 const struct smiapp_quirk smiapp_imx125es_quirk = {
132         .post_poweron = imx125es_post_poweron,
133 };
134
135 static int jt8ev1_limits(struct smiapp_sensor *sensor)
136 {
137         smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
138         smiapp_replace_limit(sensor,
139                              SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
140
141         return 0;
142 }
143
144 static int jt8ev1_post_poweron(struct smiapp_sensor *sensor)
145 {
146         struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
147         int rval;
148
149         struct smiapp_reg_8 regs[] = {
150                 { 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */
151                 { 0x30a3, 0xd0 }, /* FLASH STROBE enable */
152                 { 0x3237, 0x00 }, /* For control of pulse timing for ADC */
153                 { 0x3238, 0x43 },
154                 { 0x3301, 0x06 }, /* For analog bias for sensor */
155                 { 0x3302, 0x06 },
156                 { 0x3304, 0x00 },
157                 { 0x3305, 0x88 },
158                 { 0x332a, 0x14 },
159                 { 0x332c, 0x6b },
160                 { 0x3336, 0x01 },
161                 { 0x333f, 0x1f },
162                 { 0x3355, 0x00 },
163                 { 0x3356, 0x20 },
164                 { 0x33bf, 0x20 }, /* Adjust the FBC speed */
165                 { 0x33c9, 0x20 },
166                 { 0x33ce, 0x30 }, /* Adjust the parameter for logic function */
167                 { 0x33cf, 0xec }, /* For Black sun */
168                 { 0x3328, 0x80 }, /* Ugh. No idea what's this. */
169         };
170
171         struct smiapp_reg_8 regs_96[] = {
172                 { 0x30ae, 0x00 }, /* For control of ADC clock */
173                 { 0x30af, 0xd0 },
174                 { 0x30b0, 0x01 },
175         };
176
177         rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
178         if (rval < 0)
179                 return rval;
180
181         switch (sensor->platform_data->ext_clk) {
182         case 9600000:
183                 return smiapp_write_8s(sensor, regs_96,
184                                        ARRAY_SIZE(regs_96));
185         default:
186                 dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
187                          sensor->platform_data->ext_clk);
188                 return 0;
189         }
190 }
191
192 static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor)
193 {
194         return smiapp_write_8(sensor, 0x3328, 0x00);
195 }
196
197 static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
198 {
199         int rval;
200
201         /* Workaround: allows fast standby to work properly */
202         rval = smiapp_write_8(sensor, 0x3205, 0x04);
203         if (rval < 0)
204                 return rval;
205
206         /* Wait for 1 ms + one line => 2 ms is likely enough */
207         usleep_range(2000, 2000);
208
209         /* Restore it */
210         rval = smiapp_write_8(sensor, 0x3205, 0x00);
211         if (rval < 0)
212                 return rval;
213
214         return smiapp_write_8(sensor, 0x3328, 0x80);
215 }
216
217 static int jt8ev1_init(struct smiapp_sensor *sensor)
218 {
219         sensor->pll.flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
220
221         return 0;
222 }
223
224 const struct smiapp_quirk smiapp_jt8ev1_quirk = {
225         .limits = jt8ev1_limits,
226         .post_poweron = jt8ev1_post_poweron,
227         .pre_streamon = jt8ev1_pre_streamon,
228         .post_streamoff = jt8ev1_post_streamoff,
229         .init = jt8ev1_init,
230 };
231
232 static int tcm8500md_limits(struct smiapp_sensor *sensor)
233 {
234         smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
235
236         return 0;
237 }
238
239 const struct smiapp_quirk smiapp_tcm8500md_quirk = {
240         .limits = tcm8500md_limits,
241 };