Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / i2c / cx25840 / cx25840-firmware.c
1 /* cx25840 firmware functions
2  *
3  * This program is free software; you can redistribute it and/or
4  * modify it under the terms of the GNU General Public License
5  * as published by the Free Software Foundation; either version 2
6  * of the License, or (at your option) any later version.
7  *
8  * This program is distributed in the hope that it will be useful,
9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11  * GNU General Public License for more details.
12  *
13  * You should have received a copy of the GNU General Public License
14  * along with this program; if not, write to the Free Software
15  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
16  */
17
18 #include <linux/module.h>
19 #include <linux/i2c.h>
20 #include <linux/firmware.h>
21 #include <media/v4l2-common.h>
22 #include <media/cx25840.h>
23
24 #include "cx25840-core.h"
25
26 /*
27  * Mike Isely <isely@pobox.com> - The FWSEND parameter controls the
28  * size of the firmware chunks sent down the I2C bus to the chip.
29  * Previously this had been set to 1024 but unfortunately some I2C
30  * implementations can't transfer data in such big gulps.
31  * Specifically, the pvrusb2 driver has a hard limit of around 60
32  * bytes, due to the encapsulation there of I2C traffic into USB
33  * messages.  So we have to significantly reduce this parameter.
34  */
35 #define FWSEND 48
36
37 #define FWDEV(x) &((x)->dev)
38
39 static char *firmware = "";
40
41 module_param(firmware, charp, 0444);
42
43 MODULE_PARM_DESC(firmware, "Firmware image to load");
44
45 static void start_fw_load(struct i2c_client *client)
46 {
47         /* DL_ADDR_LB=0 DL_ADDR_HB=0 */
48         cx25840_write(client, 0x800, 0x00);
49         cx25840_write(client, 0x801, 0x00);
50         // DL_MAP=3 DL_AUTO_INC=0 DL_ENABLE=1
51         cx25840_write(client, 0x803, 0x0b);
52         /* AUTO_INC_DIS=1 */
53         cx25840_write(client, 0x000, 0x20);
54 }
55
56 static void end_fw_load(struct i2c_client *client)
57 {
58         /* AUTO_INC_DIS=0 */
59         cx25840_write(client, 0x000, 0x00);
60         /* DL_ENABLE=0 */
61         cx25840_write(client, 0x803, 0x03);
62 }
63
64 #define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw"
65 #define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw"
66 #define CX25840_FIRMWARE "v4l-cx25840.fw"
67
68 static const char *get_fw_name(struct i2c_client *client)
69 {
70         struct cx25840_state *state = to_state(i2c_get_clientdata(client));
71
72         if (firmware[0])
73                 return firmware;
74         if (is_cx2388x(state))
75                 return CX2388x_FIRMWARE;
76         if (is_cx231xx(state))
77                 return CX231xx_FIRMWARE;
78         return CX25840_FIRMWARE;
79 }
80
81 static int check_fw_load(struct i2c_client *client, int size)
82 {
83         /* DL_ADDR_HB DL_ADDR_LB */
84         int s = cx25840_read(client, 0x801) << 8;
85         s |= cx25840_read(client, 0x800);
86
87         if (size != s) {
88                 v4l_err(client, "firmware %s load failed\n",
89                                 get_fw_name(client));
90                 return -EINVAL;
91         }
92
93         v4l_info(client, "loaded %s firmware (%d bytes)\n",
94                         get_fw_name(client), size);
95         return 0;
96 }
97
98 static int fw_write(struct i2c_client *client, const u8 *data, int size)
99 {
100         if (i2c_master_send(client, data, size) < size) {
101                 v4l_err(client, "firmware load i2c failure\n");
102                 return -ENOSYS;
103         }
104
105         return 0;
106 }
107
108 int cx25840_loadfw(struct i2c_client *client)
109 {
110         struct cx25840_state *state = to_state(i2c_get_clientdata(client));
111         const struct firmware *fw = NULL;
112         u8 buffer[FWSEND];
113         const u8 *ptr;
114         const char *fwname = get_fw_name(client);
115         int size, retval;
116         int max_buf_size = FWSEND;
117         u32 gpio_oe = 0, gpio_da = 0;
118
119         if (is_cx2388x(state)) {
120                 /* Preserve the GPIO OE and output bits */
121                 gpio_oe = cx25840_read(client, 0x160);
122                 gpio_da = cx25840_read(client, 0x164);
123         }
124
125         /* cx231xx cannot accept more than 16 bytes at a time */
126         if (is_cx231xx(state) && max_buf_size > 16)
127                 max_buf_size = 16;
128
129         if (request_firmware(&fw, fwname, FWDEV(client)) != 0) {
130                 v4l_err(client, "unable to open firmware %s\n", fwname);
131                 return -EINVAL;
132         }
133
134         start_fw_load(client);
135
136         buffer[0] = 0x08;
137         buffer[1] = 0x02;
138
139         size = fw->size;
140         ptr = fw->data;
141         while (size > 0) {
142                 int len = min(max_buf_size - 2, size);
143
144                 memcpy(buffer + 2, ptr, len);
145
146                 retval = fw_write(client, buffer, len + 2);
147
148                 if (retval < 0) {
149                         release_firmware(fw);
150                         return retval;
151                 }
152
153                 size -= len;
154                 ptr += len;
155         }
156
157         end_fw_load(client);
158
159         size = fw->size;
160         release_firmware(fw);
161
162         if (is_cx2388x(state)) {
163                 /* Restore GPIO configuration after f/w load */
164                 cx25840_write(client, 0x160, gpio_oe);
165                 cx25840_write(client, 0x164, gpio_da);
166         }
167
168         return check_fw_load(client, size);
169 }
170
171 MODULE_FIRMWARE(CX2388x_FIRMWARE);
172 MODULE_FIRMWARE(CX231xx_FIRMWARE);
173 MODULE_FIRMWARE(CX25840_FIRMWARE);
174