Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / dvb-frontends / ves1x93.c
1 /*
2     Driver for VES1893 and VES1993 QPSK Demodulators
3
4     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
5     Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de>
6     Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de>
7     Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org>
8
9     This program is free software; you can redistribute it and/or modify
10     it under the terms of the GNU General Public License as published by
11     the Free Software Foundation; either version 2 of the License, or
12     (at your option) any later version.
13
14     This program is distributed in the hope that it will be useful,
15     but WITHOUT ANY WARRANTY; without even the implied warranty of
16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17
18     GNU General Public License for more details.
19
20     You should have received a copy of the GNU General Public License
21     along with this program; if not, write to the Free Software
22     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23
24 */
25
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/init.h>
29 #include <linux/string.h>
30 #include <linux/slab.h>
31 #include <linux/delay.h>
32
33 #include "dvb_frontend.h"
34 #include "ves1x93.h"
35
36
37 struct ves1x93_state {
38         struct i2c_adapter* i2c;
39         /* configuration settings */
40         const struct ves1x93_config* config;
41         struct dvb_frontend frontend;
42
43         /* previous uncorrected block counter */
44         fe_spectral_inversion_t inversion;
45         u8 *init_1x93_tab;
46         u8 *init_1x93_wtab;
47         u8 tab_size;
48         u8 demod_type;
49         u32 frequency;
50 };
51
52 static int debug;
53 #define dprintk if (debug) printk
54
55 #define DEMOD_VES1893           0
56 #define DEMOD_VES1993           1
57
58 static u8 init_1893_tab [] = {
59         0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4,
60         0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00,
61         0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
62         0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00,
63         0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
64         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
65         0x00, 0x55, 0x00, 0x00, 0x7f, 0x00
66 };
67
68 static u8 init_1993_tab [] = {
69         0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c,
70         0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00,
71         0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
72         0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10,
73         0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
74         0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
75         0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03,
76         0x00, 0x00, 0x0e, 0x80, 0x00
77 };
78
79 static u8 init_1893_wtab[] =
80 {
81         1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
82         0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1,
83         1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
84         1,1,1,0,1,1
85 };
86
87 static u8 init_1993_wtab[] =
88 {
89         1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
90         0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1,
91         1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
92         1,1,1,0,1,1,1,1, 1,1,1,1,1
93 };
94
95 static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data)
96 {
97         u8 buf [] = { 0x00, reg, data };
98         struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 };
99         int err;
100
101         if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
102                 dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
103                 return -EREMOTEIO;
104         }
105
106         return 0;
107 }
108
109 static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg)
110 {
111         int ret;
112         u8 b0 [] = { 0x00, reg };
113         u8 b1 [] = { 0 };
114         struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
115                            { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
116
117         ret = i2c_transfer (state->i2c, msg, 2);
118
119         if (ret != 2) return ret;
120
121         return b1[0];
122 }
123
124 static int ves1x93_clr_bit (struct ves1x93_state* state)
125 {
126         msleep(10);
127         ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe);
128         ves1x93_writereg (state, 0, state->init_1x93_tab[0]);
129         msleep(50);
130         return 0;
131 }
132
133 static int ves1x93_set_inversion (struct ves1x93_state* state, fe_spectral_inversion_t inversion)
134 {
135         u8 val;
136
137         /*
138          * inversion on/off are interchanged because i and q seem to
139          * be swapped on the hardware
140          */
141
142         switch (inversion) {
143         case INVERSION_OFF:
144                 val = 0xc0;
145                 break;
146         case INVERSION_ON:
147                 val = 0x80;
148                 break;
149         case INVERSION_AUTO:
150                 val = 0x00;
151                 break;
152         default:
153                 return -EINVAL;
154         }
155
156         return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val);
157 }
158
159 static int ves1x93_set_fec (struct ves1x93_state* state, fe_code_rate_t fec)
160 {
161         if (fec == FEC_AUTO)
162                 return ves1x93_writereg (state, 0x0d, 0x08);
163         else if (fec < FEC_1_2 || fec > FEC_8_9)
164                 return -EINVAL;
165         else
166                 return ves1x93_writereg (state, 0x0d, fec - FEC_1_2);
167 }
168
169 static fe_code_rate_t ves1x93_get_fec (struct ves1x93_state* state)
170 {
171         return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7);
172 }
173
174 static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate)
175 {
176         u32 BDR;
177         u32 ratio;
178         u8  ADCONF, FCONF, FNR, AGCR;
179         u32 BDRI;
180         u32 tmp;
181         u32 FIN;
182
183         dprintk("%s: srate == %d\n", __func__, (unsigned int) srate);
184
185         if (srate > state->config->xin/2)
186                 srate = state->config->xin/2;
187
188         if (srate < 500000)
189                 srate = 500000;
190
191 #define MUL (1UL<<26)
192
193         FIN = (state->config->xin + 6000) >> 4;
194
195         tmp = srate << 6;
196         ratio = tmp / FIN;
197
198         tmp = (tmp % FIN) << 8;
199         ratio = (ratio << 8) + tmp / FIN;
200
201         tmp = (tmp % FIN) << 8;
202         ratio = (ratio << 8) + tmp / FIN;
203
204         FNR = 0xff;
205
206         if (ratio < MUL/3)           FNR = 0;
207         if (ratio < (MUL*11)/50)     FNR = 1;
208         if (ratio < MUL/6)           FNR = 2;
209         if (ratio < MUL/9)           FNR = 3;
210         if (ratio < MUL/12)          FNR = 4;
211         if (ratio < (MUL*11)/200)    FNR = 5;
212         if (ratio < MUL/24)          FNR = 6;
213         if (ratio < (MUL*27)/1000)   FNR = 7;
214         if (ratio < MUL/48)          FNR = 8;
215         if (ratio < (MUL*137)/10000) FNR = 9;
216
217         if (FNR == 0xff) {
218                 ADCONF = 0x89;
219                 FCONF  = 0x80;
220                 FNR     = 0;
221         } else {
222                 ADCONF = 0x81;
223                 FCONF  = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5);
224                 /*FCONF  = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/
225         }
226
227         BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1;
228         BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1;
229
230         dprintk("FNR= %d\n", FNR);
231         dprintk("ratio= %08x\n", (unsigned int) ratio);
232         dprintk("BDR= %08x\n", (unsigned int) BDR);
233         dprintk("BDRI= %02x\n", (unsigned int) BDRI);
234
235         if (BDRI > 0xff)
236                 BDRI = 0xff;
237
238         ves1x93_writereg (state, 0x06, 0xff & BDR);
239         ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8));
240         ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16));
241
242         ves1x93_writereg (state, 0x09, BDRI);
243         ves1x93_writereg (state, 0x20, ADCONF);
244         ves1x93_writereg (state, 0x21, FCONF);
245
246         AGCR = state->init_1x93_tab[0x05];
247         if (state->config->invert_pwm)
248                 AGCR |= 0x20;
249
250         if (srate < 6000000)
251                 AGCR |= 0x80;
252         else
253                 AGCR &= ~0x80;
254
255         ves1x93_writereg (state, 0x05, AGCR);
256
257         /* ves1993 hates this, will lose lock */
258         if (state->demod_type != DEMOD_VES1993)
259                 ves1x93_clr_bit (state);
260
261         return 0;
262 }
263
264 static int ves1x93_init (struct dvb_frontend* fe)
265 {
266         struct ves1x93_state* state = fe->demodulator_priv;
267         int i;
268         int val;
269
270         dprintk("%s: init chip\n", __func__);
271
272         for (i = 0; i < state->tab_size; i++) {
273                 if (state->init_1x93_wtab[i]) {
274                         val = state->init_1x93_tab[i];
275
276                         if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */
277                         ves1x93_writereg (state, i, val);
278                 }
279         }
280
281         return 0;
282 }
283
284 static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
285 {
286         struct ves1x93_state* state = fe->demodulator_priv;
287
288         switch (voltage) {
289         case SEC_VOLTAGE_13:
290                 return ves1x93_writereg (state, 0x1f, 0x20);
291         case SEC_VOLTAGE_18:
292                 return ves1x93_writereg (state, 0x1f, 0x30);
293         case SEC_VOLTAGE_OFF:
294                 return ves1x93_writereg (state, 0x1f, 0x00);
295         default:
296                 return -EINVAL;
297         }
298 }
299
300 static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status)
301 {
302         struct ves1x93_state* state = fe->demodulator_priv;
303
304         u8 sync = ves1x93_readreg (state, 0x0e);
305
306         /*
307          * The ves1893 sometimes returns sync values that make no sense,
308          * because, e.g., the SIGNAL bit is 0, while some of the higher
309          * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
310          * Tests showed that the VITERBI and SYNC bits are returned
311          * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
312          * If such a case occurs, we read the value again, until we get a
313          * valid value.
314          */
315         int maxtry = 10; /* just for safety - let's not get stuck here */
316         while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) {
317                 msleep(10);
318                 sync = ves1x93_readreg (state, 0x0e);
319         }
320
321         *status = 0;
322
323         if (sync & 1)
324                 *status |= FE_HAS_SIGNAL;
325
326         if (sync & 2)
327                 *status |= FE_HAS_CARRIER;
328
329         if (sync & 4)
330                 *status |= FE_HAS_VITERBI;
331
332         if (sync & 8)
333                 *status |= FE_HAS_SYNC;
334
335         if ((sync & 0x1f) == 0x1f)
336                 *status |= FE_HAS_LOCK;
337
338         return 0;
339 }
340
341 static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber)
342 {
343         struct ves1x93_state* state = fe->demodulator_priv;
344
345         *ber = ves1x93_readreg (state, 0x15);
346         *ber |= (ves1x93_readreg (state, 0x16) << 8);
347         *ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16);
348         *ber *= 10;
349
350         return 0;
351 }
352
353 static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength)
354 {
355         struct ves1x93_state* state = fe->demodulator_priv;
356
357         u8 signal = ~ves1x93_readreg (state, 0x0b);
358         *strength = (signal << 8) | signal;
359
360         return 0;
361 }
362
363 static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr)
364 {
365         struct ves1x93_state* state = fe->demodulator_priv;
366
367         u8 _snr = ~ves1x93_readreg (state, 0x1c);
368         *snr = (_snr << 8) | _snr;
369
370         return 0;
371 }
372
373 static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
374 {
375         struct ves1x93_state* state = fe->demodulator_priv;
376
377         *ucblocks = ves1x93_readreg (state, 0x18) & 0x7f;
378
379         if (*ucblocks == 0x7f)
380                 *ucblocks = 0xffffffff;   /* counter overflow... */
381
382         ves1x93_writereg (state, 0x18, 0x00);  /* reset the counter */
383         ves1x93_writereg (state, 0x18, 0x80);  /* dto. */
384
385         return 0;
386 }
387
388 static int ves1x93_set_frontend(struct dvb_frontend *fe)
389 {
390         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
391         struct ves1x93_state* state = fe->demodulator_priv;
392
393         if (fe->ops.tuner_ops.set_params) {
394                 fe->ops.tuner_ops.set_params(fe);
395                 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
396         }
397         ves1x93_set_inversion (state, p->inversion);
398         ves1x93_set_fec(state, p->fec_inner);
399         ves1x93_set_symbolrate(state, p->symbol_rate);
400         state->inversion = p->inversion;
401         state->frequency = p->frequency;
402
403         return 0;
404 }
405
406 static int ves1x93_get_frontend(struct dvb_frontend *fe)
407 {
408         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
409         struct ves1x93_state* state = fe->demodulator_priv;
410         int afc;
411
412         afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2;
413         afc = (afc * (int)(p->symbol_rate/1000/8))/16;
414
415         p->frequency = state->frequency - afc;
416
417         /*
418          * inversion indicator is only valid
419          * if auto inversion was used
420          */
421         if (state->inversion == INVERSION_AUTO)
422                 p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ?
423                                 INVERSION_OFF : INVERSION_ON;
424         p->fec_inner = ves1x93_get_fec(state);
425         /*  XXX FIXME: timing offset !! */
426
427         return 0;
428 }
429
430 static int ves1x93_sleep(struct dvb_frontend* fe)
431 {
432         struct ves1x93_state* state = fe->demodulator_priv;
433
434         return ves1x93_writereg (state, 0x00, 0x08);
435 }
436
437 static void ves1x93_release(struct dvb_frontend* fe)
438 {
439         struct ves1x93_state* state = fe->demodulator_priv;
440         kfree(state);
441 }
442
443 static int ves1x93_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
444 {
445         struct ves1x93_state* state = fe->demodulator_priv;
446
447         if (enable) {
448                 return ves1x93_writereg(state, 0x00, 0x11);
449         } else {
450                 return ves1x93_writereg(state, 0x00, 0x01);
451         }
452 }
453
454 static struct dvb_frontend_ops ves1x93_ops;
455
456 struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
457                                     struct i2c_adapter* i2c)
458 {
459         struct ves1x93_state* state = NULL;
460         u8 identity;
461
462         /* allocate memory for the internal state */
463         state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
464         if (state == NULL) goto error;
465
466         /* setup the state */
467         state->config = config;
468         state->i2c = i2c;
469         state->inversion = INVERSION_OFF;
470
471         /* check if the demod is there + identify it */
472         identity = ves1x93_readreg(state, 0x1e);
473         switch (identity) {
474         case 0xdc: /* VES1893A rev1 */
475                 printk("ves1x93: Detected ves1893a rev1\n");
476                 state->demod_type = DEMOD_VES1893;
477                 state->init_1x93_tab = init_1893_tab;
478                 state->init_1x93_wtab = init_1893_wtab;
479                 state->tab_size = sizeof(init_1893_tab);
480                 break;
481
482         case 0xdd: /* VES1893A rev2 */
483                 printk("ves1x93: Detected ves1893a rev2\n");
484                 state->demod_type = DEMOD_VES1893;
485                 state->init_1x93_tab = init_1893_tab;
486                 state->init_1x93_wtab = init_1893_wtab;
487                 state->tab_size = sizeof(init_1893_tab);
488                 break;
489
490         case 0xde: /* VES1993 */
491                 printk("ves1x93: Detected ves1993\n");
492                 state->demod_type = DEMOD_VES1993;
493                 state->init_1x93_tab = init_1993_tab;
494                 state->init_1x93_wtab = init_1993_wtab;
495                 state->tab_size = sizeof(init_1993_tab);
496                 break;
497
498         default:
499                 goto error;
500         }
501
502         /* create dvb_frontend */
503         memcpy(&state->frontend.ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops));
504         state->frontend.demodulator_priv = state;
505         return &state->frontend;
506
507 error:
508         kfree(state);
509         return NULL;
510 }
511
512 static struct dvb_frontend_ops ves1x93_ops = {
513         .delsys = { SYS_DVBS },
514         .info = {
515                 .name                   = "VLSI VES1x93 DVB-S",
516                 .frequency_min          = 950000,
517                 .frequency_max          = 2150000,
518                 .frequency_stepsize     = 125,           /* kHz for QPSK frontends */
519                 .frequency_tolerance    = 29500,
520                 .symbol_rate_min        = 1000000,
521                 .symbol_rate_max        = 45000000,
522         /*      .symbol_rate_tolerance  =       ???,*/
523                 .caps = FE_CAN_INVERSION_AUTO |
524                         FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
525                         FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
526                         FE_CAN_QPSK
527         },
528
529         .release = ves1x93_release,
530
531         .init = ves1x93_init,
532         .sleep = ves1x93_sleep,
533         .i2c_gate_ctrl = ves1x93_i2c_gate_ctrl,
534
535         .set_frontend = ves1x93_set_frontend,
536         .get_frontend = ves1x93_get_frontend,
537
538         .read_status = ves1x93_read_status,
539         .read_ber = ves1x93_read_ber,
540         .read_signal_strength = ves1x93_read_signal_strength,
541         .read_snr = ves1x93_read_snr,
542         .read_ucblocks = ves1x93_read_ucblocks,
543
544         .set_voltage = ves1x93_set_voltage,
545 };
546
547 module_param(debug, int, 0644);
548
549 MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver");
550 MODULE_AUTHOR("Ralph Metzler");
551 MODULE_LICENSE("GPL");
552
553 EXPORT_SYMBOL(ves1x93_attach);