Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / dvb-frontends / tda10071_priv.h
1 /*
2  * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
3  *
4  * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
5  *
6  *    This program is free software; you can redistribute it and/or modify
7  *    it under the terms of the GNU General Public License as published by
8  *    the Free Software Foundation; either version 2 of the License, or
9  *    (at your option) any later version.
10  *
11  *    This program is distributed in the hope that it will be useful,
12  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *    GNU General Public License for more details.
15  *
16  *    You should have received a copy of the GNU General Public License along
17  *    with this program; if not, write to the Free Software Foundation, Inc.,
18  *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
19  */
20
21 #ifndef TDA10071_PRIV
22 #define TDA10071_PRIV
23
24 #include "dvb_frontend.h"
25 #include "tda10071.h"
26 #include <linux/firmware.h>
27
28 struct tda10071_priv {
29         struct i2c_adapter *i2c;
30         struct dvb_frontend fe;
31         struct tda10071_config cfg;
32
33         u8 meas_count[2];
34         u32 ber;
35         u32 ucb;
36         fe_status_t fe_status;
37         fe_delivery_system_t delivery_system;
38         bool warm; /* FW running */
39 };
40
41 static struct tda10071_modcod {
42         fe_delivery_system_t delivery_system;
43         fe_modulation_t modulation;
44         fe_code_rate_t fec;
45         u8 val;
46 } TDA10071_MODCOD[] = {
47         /* NBC-QPSK */
48         { SYS_DVBS2, QPSK,  FEC_AUTO, 0x00 },
49         { SYS_DVBS2, QPSK,  FEC_1_2,  0x04 },
50         { SYS_DVBS2, QPSK,  FEC_3_5,  0x05 },
51         { SYS_DVBS2, QPSK,  FEC_2_3,  0x06 },
52         { SYS_DVBS2, QPSK,  FEC_3_4,  0x07 },
53         { SYS_DVBS2, QPSK,  FEC_4_5,  0x08 },
54         { SYS_DVBS2, QPSK,  FEC_5_6,  0x09 },
55         { SYS_DVBS2, QPSK,  FEC_8_9,  0x0a },
56         { SYS_DVBS2, QPSK,  FEC_9_10, 0x0b },
57         /* 8PSK */
58         { SYS_DVBS2, PSK_8, FEC_AUTO, 0x00 },
59         { SYS_DVBS2, PSK_8, FEC_3_5,  0x0c },
60         { SYS_DVBS2, PSK_8, FEC_2_3,  0x0d },
61         { SYS_DVBS2, PSK_8, FEC_3_4,  0x0e },
62         { SYS_DVBS2, PSK_8, FEC_5_6,  0x0f },
63         { SYS_DVBS2, PSK_8, FEC_8_9,  0x10 },
64         { SYS_DVBS2, PSK_8, FEC_9_10, 0x11 },
65         /* QPSK */
66         { SYS_DVBS,  QPSK,  FEC_AUTO, 0x2d },
67         { SYS_DVBS,  QPSK,  FEC_1_2,  0x2e },
68         { SYS_DVBS,  QPSK,  FEC_2_3,  0x2f },
69         { SYS_DVBS,  QPSK,  FEC_3_4,  0x30 },
70         { SYS_DVBS,  QPSK,  FEC_5_6,  0x31 },
71         { SYS_DVBS,  QPSK,  FEC_7_8,  0x32 },
72 };
73
74 struct tda10071_reg_val_mask {
75         u8 reg;
76         u8 val;
77         u8 mask;
78 };
79
80 /* firmware filename */
81 #define TDA10071_FIRMWARE "dvb-fe-tda10071.fw"
82
83 /* firmware commands */
84 #define CMD_DEMOD_INIT          0x10
85 #define CMD_CHANGE_CHANNEL      0x11
86 #define CMD_MPEG_CONFIG         0x13
87 #define CMD_TUNER_INIT          0x15
88 #define CMD_GET_AGCACC          0x1a
89
90 #define CMD_LNB_CONFIG          0x20
91 #define CMD_LNB_SEND_DISEQC     0x21
92 #define CMD_LNB_SET_DC_LEVEL    0x22
93 #define CMD_LNB_PCB_CONFIG      0x23
94 #define CMD_LNB_SEND_TONEBURST  0x24
95 #define CMD_LNB_UPDATE_REPLY    0x25
96
97 #define CMD_GET_FW_VERSION      0x35
98 #define CMD_SET_SLEEP_MODE      0x36
99 #define CMD_BER_CONTROL         0x3e
100 #define CMD_BER_UPDATE_COUNTERS 0x3f
101
102 /* firmware command struct */
103 #define TDA10071_ARGLEN      30
104 struct tda10071_cmd {
105         u8 args[TDA10071_ARGLEN];
106         u8 len;
107 };
108
109
110 #endif /* TDA10071_PRIV */