Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / dvb-frontends / tda10021.c
1 /*
2     TDA10021  - Single Chip Cable Channel Receiver driver module
3                used on the Siemens DVB-C cards
4
5     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
6     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
7                    Support for TDA10021
8
9     This program is free software; you can redistribute it and/or modify
10     it under the terms of the GNU General Public License as published by
11     the Free Software Foundation; either version 2 of the License, or
12     (at your option) any later version.
13
14     This program is distributed in the hope that it will be useful,
15     but WITHOUT ANY WARRANTY; without even the implied warranty of
16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17     GNU General Public License for more details.
18
19     You should have received a copy of the GNU General Public License
20     along with this program; if not, write to the Free Software
21     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24 #include <linux/delay.h>
25 #include <linux/errno.h>
26 #include <linux/init.h>
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/string.h>
30 #include <linux/slab.h>
31
32 #include "dvb_frontend.h"
33 #include "tda1002x.h"
34
35
36 struct tda10021_state {
37         struct i2c_adapter* i2c;
38         /* configuration settings */
39         const struct tda1002x_config* config;
40         struct dvb_frontend frontend;
41
42         u8 pwm;
43         u8 reg0;
44 };
45
46
47 #if 0
48 #define dprintk(x...) printk(x)
49 #else
50 #define dprintk(x...)
51 #endif
52
53 static int verbose;
54
55 #define XIN 57840000UL
56
57 #define FIN (XIN >> 4)
58
59 static int tda10021_inittab_size = 0x40;
60 static u8 tda10021_inittab[0x40]=
61 {
62         0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a,
63         0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40,
64         0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff,
65         0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00,
66         0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00,
67         0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58,
68         0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00,
69         0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00,
70 };
71
72 static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
73 {
74         u8 buf[] = { reg, data };
75         struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
76         int ret;
77
78         ret = i2c_transfer (state->i2c, &msg, 1);
79         if (ret != 1)
80                 printk("DVB: TDA10021(%d): %s, writereg error "
81                         "(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
82                         state->frontend.dvb->num, __func__, reg, data, ret);
83
84         msleep(10);
85         return (ret != 1) ? -EREMOTEIO : 0;
86 }
87
88 static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
89 {
90         u8 b0 [] = { reg };
91         u8 b1 [] = { 0 };
92         struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
93                                   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
94         int ret;
95
96         ret = i2c_transfer (state->i2c, msg, 2);
97         // Don't print an error message if the id is read.
98         if (ret != 2 && reg != 0x1a)
99                 printk("DVB: TDA10021: %s: readreg error (ret == %i)\n",
100                                 __func__, ret);
101         return b1[0];
102 }
103
104 //get access to tuner
105 static int lock_tuner(struct tda10021_state* state)
106 {
107         u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] | 0x80 };
108         struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
109
110         if(i2c_transfer(state->i2c, &msg, 1) != 1)
111         {
112                 printk("tda10021: lock tuner fails\n");
113                 return -EREMOTEIO;
114         }
115         return 0;
116 }
117
118 //release access from tuner
119 static int unlock_tuner(struct tda10021_state* state)
120 {
121         u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] & 0x7f };
122         struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
123
124         if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
125         {
126                 printk("tda10021: unlock tuner fails\n");
127                 return -EREMOTEIO;
128         }
129         return 0;
130 }
131
132 static int tda10021_setup_reg0 (struct tda10021_state* state, u8 reg0,
133                                 fe_spectral_inversion_t inversion)
134 {
135         reg0 |= state->reg0 & 0x63;
136
137         if ((INVERSION_ON == inversion) ^ (state->config->invert == 0))
138                 reg0 &= ~0x20;
139         else
140                 reg0 |= 0x20;
141
142         _tda10021_writereg (state, 0x00, reg0 & 0xfe);
143         _tda10021_writereg (state, 0x00, reg0 | 0x01);
144
145         state->reg0 = reg0;
146         return 0;
147 }
148
149 static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate)
150 {
151         s32 BDR;
152         s32 BDRI;
153         s16 SFIL=0;
154         u16 NDEC = 0;
155         u32 tmp, ratio;
156
157         if (symbolrate > XIN/2)
158                 symbolrate = XIN/2;
159         if (symbolrate < 500000)
160                 symbolrate = 500000;
161
162         if (symbolrate < XIN/16) NDEC = 1;
163         if (symbolrate < XIN/32) NDEC = 2;
164         if (symbolrate < XIN/64) NDEC = 3;
165
166         if (symbolrate < (u32)(XIN/12.3)) SFIL = 1;
167         if (symbolrate < (u32)(XIN/16))  SFIL = 0;
168         if (symbolrate < (u32)(XIN/24.6)) SFIL = 1;
169         if (symbolrate < (u32)(XIN/32))  SFIL = 0;
170         if (symbolrate < (u32)(XIN/49.2)) SFIL = 1;
171         if (symbolrate < (u32)(XIN/64))  SFIL = 0;
172         if (symbolrate < (u32)(XIN/98.4)) SFIL = 1;
173
174         symbolrate <<= NDEC;
175         ratio = (symbolrate << 4) / FIN;
176         tmp =  ((symbolrate << 4) % FIN) << 8;
177         ratio = (ratio << 8) + tmp / FIN;
178         tmp = (tmp % FIN) << 8;
179         ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, FIN);
180
181         BDR = ratio;
182         BDRI = (((XIN << 5) / symbolrate) + 1) / 2;
183
184         if (BDRI > 0xFF)
185                 BDRI = 0xFF;
186
187         SFIL = (SFIL << 4) | tda10021_inittab[0x0E];
188
189         NDEC = (NDEC << 6) | tda10021_inittab[0x03];
190
191         _tda10021_writereg (state, 0x03, NDEC);
192         _tda10021_writereg (state, 0x0a, BDR&0xff);
193         _tda10021_writereg (state, 0x0b, (BDR>> 8)&0xff);
194         _tda10021_writereg (state, 0x0c, (BDR>>16)&0x3f);
195
196         _tda10021_writereg (state, 0x0d, BDRI);
197         _tda10021_writereg (state, 0x0e, SFIL);
198
199         return 0;
200 }
201
202 static int tda10021_init (struct dvb_frontend *fe)
203 {
204         struct tda10021_state* state = fe->demodulator_priv;
205         int i;
206
207         dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num);
208
209         //_tda10021_writereg (fe, 0, 0);
210
211         for (i=0; i<tda10021_inittab_size; i++)
212                 _tda10021_writereg (state, i, tda10021_inittab[i]);
213
214         _tda10021_writereg (state, 0x34, state->pwm);
215
216         //Comment by markus
217         //0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0)
218         //0x2A[4] == BYPPLL -> Power down mode (default 1)
219         //0x2A[5] == LCK -> PLL Lock Flag
220         //0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0)
221
222         //Activate PLL
223         _tda10021_writereg(state, 0x2a, tda10021_inittab[0x2a] & 0xef);
224         return 0;
225 }
226
227 struct qam_params {
228         u8 conf, agcref, lthr, mseth, aref;
229 };
230
231 static int tda10021_set_parameters(struct dvb_frontend *fe)
232 {
233         struct dtv_frontend_properties *c = &fe->dtv_property_cache;
234         u32 delsys  = c->delivery_system;
235         unsigned qam = c->modulation;
236         bool is_annex_c;
237         u32 reg0x3d;
238         struct tda10021_state* state = fe->demodulator_priv;
239         static const struct qam_params qam_params[] = {
240                 /* Modulation  Conf  AGCref  LTHR  MSETH  AREF */
241                 [QPSK]     = { 0x14, 0x78,   0x78, 0x8c,  0x96 },
242                 [QAM_16]   = { 0x00, 0x8c,   0x87, 0xa2,  0x91 },
243                 [QAM_32]   = { 0x04, 0x8c,   0x64, 0x74,  0x96 },
244                 [QAM_64]   = { 0x08, 0x6a,   0x46, 0x43,  0x6a },
245                 [QAM_128]  = { 0x0c, 0x78,   0x36, 0x34,  0x7e },
246                 [QAM_256]  = { 0x10, 0x5c,   0x26, 0x23,  0x6b },
247         };
248
249         switch (delsys) {
250         case SYS_DVBC_ANNEX_A:
251                 is_annex_c = false;
252                 break;
253         case SYS_DVBC_ANNEX_C:
254                 is_annex_c = true;
255                 break;
256         default:
257                 return -EINVAL;
258         }
259
260         /*
261          * gcc optimizes the code bellow the same way as it would code:
262          *           "if (qam > 5) return -EINVAL;"
263          * Yet, the code is clearer, as it shows what QAM standards are
264          * supported by the driver, and avoids the usage of magic numbers on
265          * it.
266          */
267         switch (qam) {
268         case QPSK:
269         case QAM_16:
270         case QAM_32:
271         case QAM_64:
272         case QAM_128:
273         case QAM_256:
274                 break;
275         default:
276                 return -EINVAL;
277         }
278
279         if (c->inversion != INVERSION_ON && c->inversion != INVERSION_OFF)
280                 return -EINVAL;
281
282         /*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/
283
284         if (fe->ops.tuner_ops.set_params) {
285                 fe->ops.tuner_ops.set_params(fe);
286                 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
287         }
288
289         tda10021_set_symbolrate(state, c->symbol_rate);
290         _tda10021_writereg(state, 0x34, state->pwm);
291
292         _tda10021_writereg(state, 0x01, qam_params[qam].agcref);
293         _tda10021_writereg(state, 0x05, qam_params[qam].lthr);
294         _tda10021_writereg(state, 0x08, qam_params[qam].mseth);
295         _tda10021_writereg(state, 0x09, qam_params[qam].aref);
296
297         /*
298          * Bit 0 == 0 means roll-off = 0.15 (Annex A)
299          *       == 1 means roll-off = 0.13 (Annex C)
300          */
301         reg0x3d = tda10021_readreg (state, 0x3d);
302         if (is_annex_c)
303                 _tda10021_writereg (state, 0x3d, 0x01 | reg0x3d);
304         else
305                 _tda10021_writereg (state, 0x3d, 0xfe & reg0x3d);
306         tda10021_setup_reg0(state, qam_params[qam].conf, c->inversion);
307
308         return 0;
309 }
310
311 static int tda10021_read_status(struct dvb_frontend* fe, fe_status_t* status)
312 {
313         struct tda10021_state* state = fe->demodulator_priv;
314         int sync;
315
316         *status = 0;
317         //0x11[0] == EQALGO -> Equalizer algorithms state
318         //0x11[1] == CARLOCK -> Carrier locked
319         //0x11[2] == FSYNC -> Frame synchronisation
320         //0x11[3] == FEL -> Front End locked
321         //0x11[6] == NODVB -> DVB Mode Information
322         sync = tda10021_readreg (state, 0x11);
323
324         if (sync & 2)
325                 *status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
326
327         if (sync & 4)
328                 *status |= FE_HAS_SYNC|FE_HAS_VITERBI;
329
330         if (sync & 8)
331                 *status |= FE_HAS_LOCK;
332
333         return 0;
334 }
335
336 static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
337 {
338         struct tda10021_state* state = fe->demodulator_priv;
339
340         u32 _ber = tda10021_readreg(state, 0x14) |
341                 (tda10021_readreg(state, 0x15) << 8) |
342                 ((tda10021_readreg(state, 0x16) & 0x0f) << 16);
343         _tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
344                                         | (tda10021_inittab[0x10] & 0xc0));
345         *ber = 10 * _ber;
346
347         return 0;
348 }
349
350 static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
351 {
352         struct tda10021_state* state = fe->demodulator_priv;
353
354         u8 config = tda10021_readreg(state, 0x02);
355         u8 gain = tda10021_readreg(state, 0x17);
356         if (config & 0x02)
357                 /* the agc value is inverted */
358                 gain = ~gain;
359         *strength = (gain << 8) | gain;
360
361         return 0;
362 }
363
364 static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr)
365 {
366         struct tda10021_state* state = fe->demodulator_priv;
367
368         u8 quality = ~tda10021_readreg(state, 0x18);
369         *snr = (quality << 8) | quality;
370
371         return 0;
372 }
373
374 static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
375 {
376         struct tda10021_state* state = fe->demodulator_priv;
377
378         *ucblocks = tda10021_readreg (state, 0x13) & 0x7f;
379         if (*ucblocks == 0x7f)
380                 *ucblocks = 0xffffffff;
381
382         /* reset uncorrected block counter */
383         _tda10021_writereg (state, 0x10, tda10021_inittab[0x10] & 0xdf);
384         _tda10021_writereg (state, 0x10, tda10021_inittab[0x10]);
385
386         return 0;
387 }
388
389 static int tda10021_get_frontend(struct dvb_frontend *fe)
390 {
391         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
392         struct tda10021_state* state = fe->demodulator_priv;
393         int sync;
394         s8 afc = 0;
395
396         sync = tda10021_readreg(state, 0x11);
397         afc = tda10021_readreg(state, 0x19);
398         if (verbose) {
399                 /* AFC only valid when carrier has been recovered */
400                 printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" :
401                                   "DVB: TDA10021(%d): [AFC (%d) %dHz]\n",
402                         state->frontend.dvb->num, afc,
403                        -((s32)p->symbol_rate * afc) >> 10);
404         }
405
406         p->inversion = ((state->reg0 & 0x20) == 0x20) ^ (state->config->invert != 0) ? INVERSION_ON : INVERSION_OFF;
407         p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
408
409         p->fec_inner = FEC_NONE;
410         p->frequency = ((p->frequency + 31250) / 62500) * 62500;
411
412         if (sync & 2)
413                 p->frequency -= ((s32)p->symbol_rate * afc) >> 10;
414
415         return 0;
416 }
417
418 static int tda10021_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
419 {
420         struct tda10021_state* state = fe->demodulator_priv;
421
422         if (enable) {
423                 lock_tuner(state);
424         } else {
425                 unlock_tuner(state);
426         }
427         return 0;
428 }
429
430 static int tda10021_sleep(struct dvb_frontend* fe)
431 {
432         struct tda10021_state* state = fe->demodulator_priv;
433
434         _tda10021_writereg (state, 0x1b, 0x02);  /* pdown ADC */
435         _tda10021_writereg (state, 0x00, 0x80);  /* standby */
436
437         return 0;
438 }
439
440 static void tda10021_release(struct dvb_frontend* fe)
441 {
442         struct tda10021_state* state = fe->demodulator_priv;
443         kfree(state);
444 }
445
446 static struct dvb_frontend_ops tda10021_ops;
447
448 struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
449                                      struct i2c_adapter* i2c,
450                                      u8 pwm)
451 {
452         struct tda10021_state* state = NULL;
453         u8 id;
454
455         /* allocate memory for the internal state */
456         state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
457         if (state == NULL) goto error;
458
459         /* setup the state */
460         state->config = config;
461         state->i2c = i2c;
462         state->pwm = pwm;
463         state->reg0 = tda10021_inittab[0];
464
465         /* check if the demod is there */
466         id = tda10021_readreg(state, 0x1a);
467         if ((id & 0xf0) != 0x70) goto error;
468
469         /* Don't claim TDA10023 */
470         if (id == 0x7d)
471                 goto error;
472
473         printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
474                state->config->demod_address, id);
475
476         /* create dvb_frontend */
477         memcpy(&state->frontend.ops, &tda10021_ops, sizeof(struct dvb_frontend_ops));
478         state->frontend.demodulator_priv = state;
479         return &state->frontend;
480
481 error:
482         kfree(state);
483         return NULL;
484 }
485
486 static struct dvb_frontend_ops tda10021_ops = {
487         .delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C },
488         .info = {
489                 .name = "Philips TDA10021 DVB-C",
490                 .frequency_stepsize = 62500,
491                 .frequency_min = 47000000,
492                 .frequency_max = 862000000,
493                 .symbol_rate_min = (XIN/2)/64,     /* SACLK/64 == (XIN/2)/64 */
494                 .symbol_rate_max = (XIN/2)/4,      /* SACLK/4 */
495         #if 0
496                 .frequency_tolerance = ???,
497                 .symbol_rate_tolerance = ???,  /* ppm */  /* == 8% (spec p. 5) */
498         #endif
499                 .caps = 0x400 | //FE_CAN_QAM_4
500                         FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
501                         FE_CAN_QAM_128 | FE_CAN_QAM_256 |
502                         FE_CAN_FEC_AUTO
503         },
504
505         .release = tda10021_release,
506
507         .init = tda10021_init,
508         .sleep = tda10021_sleep,
509         .i2c_gate_ctrl = tda10021_i2c_gate_ctrl,
510
511         .set_frontend = tda10021_set_parameters,
512         .get_frontend = tda10021_get_frontend,
513
514         .read_status = tda10021_read_status,
515         .read_ber = tda10021_read_ber,
516         .read_signal_strength = tda10021_read_signal_strength,
517         .read_snr = tda10021_read_snr,
518         .read_ucblocks = tda10021_read_ucblocks,
519 };
520
521 module_param(verbose, int, 0644);
522 MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
523
524 MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver");
525 MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz");
526 MODULE_LICENSE("GPL");
527
528 EXPORT_SYMBOL(tda10021_attach);