kernel/drivers/media/common/saa7146/saa7146_hlp.c

   1 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
   2
   3 #include <linux/kernel.h>
   4 #include <linux/export.h>
   5 #include <media/saa7146_vv.h>
   6
   7 static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
   8 {
   9         /* clear out the necessary bits */
  10         *clip_format &= 0x0000ffff;
  11         /* set these bits new */
  12         *clip_format |=  (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
  13 }
  14
  15 static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
  16 {
  17         *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
  18         *hps_ctrl |= (source << 30) | (sync << 28);
  19 }
  20
  21 static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
  22 {
  23         int hyo = 0, hxo = 0;
  24
  25         hyo = vv->standard->v_offset;
  26         hxo = vv->standard->h_offset;
  27
  28         *hps_h_scale    &= ~(MASK_B0 | 0xf00);
  29         *hps_h_scale    |= (hxo <<  0);
  30
  31         *hps_ctrl       &= ~(MASK_W0 | MASK_B2);
  32         *hps_ctrl       |= (hyo << 12);
  33 }
  34
  35 /* helper functions for the calculation of the horizontal- and vertical
  36    scaling registers, clip-format-register etc ...
  37    these functions take pointers to the (most-likely read-out
  38    original-values) and manipulate them according to the requested
  39    changes.
  40 */
  41
  42 /* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
  43 static struct {
  44         u16 hps_coeff;
  45         u16 weight_sum;
  46 } hps_h_coeff_tab [] = {
  47         {0x00,   2}, {0x02,   4}, {0x00,   4}, {0x06,   8}, {0x02,   8},
  48         {0x08,   8}, {0x00,   8}, {0x1E,  16}, {0x0E,   8}, {0x26,   8},
  49         {0x06,   8}, {0x42,   8}, {0x02,   8}, {0x80,   8}, {0x00,   8},
  50         {0xFE,  16}, {0xFE,   8}, {0x7E,   8}, {0x7E,   8}, {0x3E,   8},
  51         {0x3E,   8}, {0x1E,   8}, {0x1E,   8}, {0x0E,   8}, {0x0E,   8},
  52         {0x06,   8}, {0x06,   8}, {0x02,   8}, {0x02,   8}, {0x00,   8},
  53         {0x00,   8}, {0xFE,  16}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  54         {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  55         {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  56         {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0x7E,   8},
  57         {0x7E,   8}, {0x3E,   8}, {0x3E,   8}, {0x1E,   8}, {0x1E,   8},
  58         {0x0E,   8}, {0x0E,   8}, {0x06,   8}, {0x06,   8}, {0x02,   8},
  59         {0x02,   8}, {0x00,   8}, {0x00,   8}, {0xFE,  16}
  60 };
  61
  62 /* table of attenuation values for horizontal scaling */
  63 static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
  64
  65 /* calculate horizontal scale registers */
  66 static int calculate_h_scale_registers(struct saa7146_dev *dev,
  67         int in_x, int out_x, int flip_lr,
  68         u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
  69 {
  70         /* horizontal prescaler */
  71         u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
  72         /* horizontal scaler */
  73         u32 xim = 0, xp = 0, xsci =0;
  74         /* vertical scale & gain */
  75         u32 pfuv = 0;
  76
  77         /* helper variables */
  78         u32 h_atten = 0, i = 0;
  79
  80         if ( 0 == out_x ) {
  81                 return -EINVAL;
  82         }
  83
  84         /* mask out vanity-bit */
  85         *hps_ctrl &= ~MASK_29;
  86
  87         /* calculate prescale-(xspc)-value:     [n   .. 1/2) : 1
  88                                                 [1/2 .. 1/3) : 2
  89                                                 [1/3 .. 1/4) : 3
  90                                                 ...             */
  91         if (in_x > out_x) {
  92                 xpsc = in_x / out_x;
  93         }
  94         else {
  95                 /* zooming */
  96                 xpsc = 1;
  97         }
  98
  99         /* if flip_lr-bit is set, number of pixels after
 100            horizontal prescaling must be < 384 */
 101         if ( 0 != flip_lr ) {
 102
 103                 /* set vanity bit */
 104                 *hps_ctrl |= MASK_29;
 105
 106                 while (in_x / xpsc >= 384 )
 107                         xpsc++;
 108         }
 109         /* if zooming is wanted, number of pixels after
 110            horizontal prescaling must be < 768 */
 111         else {
 112                 while ( in_x / xpsc >= 768 )
 113                         xpsc++;
 114         }
 115
 116         /* maximum prescale is 64 (p.69) */
 117         if ( xpsc > 64 )
 118                 xpsc = 64;
 119
 120         /* keep xacm clear*/
 121         xacm = 0;
 122
 123         /* set horizontal filter parameters (CXY = CXUV) */
 124         cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
 125         cxuv = cxy;
 126
 127         /* calculate and set horizontal fine scale (xsci) */
 128
 129         /* bypass the horizontal scaler ? */
 130         if ( (in_x == out_x) && ( 1 == xpsc ) )
 131                 xsci = 0x400;
 132         else
 133                 xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
 134
 135         /* set start phase for horizontal fine scale (xp) to 0 */
 136         xp = 0;
 137
 138         /* set xim, if we bypass the horizontal scaler */
 139         if ( 0x400 == xsci )
 140                 xim = 1;
 141         else
 142                 xim = 0;
 143
 144         /* if the prescaler is bypassed, enable horizontal
 145            accumulation mode (xacm) and clear dcgx */
 146         if( 1 == xpsc ) {
 147                 xacm = 1;
 148                 dcgx = 0;
 149         } else {
 150                 xacm = 0;
 151                 /* get best match in the table of attenuations
 152                    for horizontal scaling */
 153                 h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
 154
 155                 for (i = 0; h_attenuation[i] != 0; i++) {
 156                         if (h_attenuation[i] >= h_atten)
 157                                 break;
 158                 }
 159
 160                 dcgx = i;
 161         }
 162
 163         /* the horizontal scaling increment controls the UV filter
 164            to reduce the bandwidth to improve the display quality,
 165            so set it ... */
 166         if ( xsci == 0x400)
 167                 pfuv = 0x00;
 168         else if ( xsci < 0x600)
 169                 pfuv = 0x01;
 170         else if ( xsci < 0x680)
 171                 pfuv = 0x11;
 172         else if ( xsci < 0x700)
 173                 pfuv = 0x22;
 174         else
 175                 pfuv = 0x33;
 176
 177
 178         *hps_v_gain  &= MASK_W0|MASK_B2;
 179         *hps_v_gain  |= (pfuv << 24);
 180
 181         *hps_h_scale    &= ~(MASK_W1 | 0xf000);
 182         *hps_h_scale    |= (xim << 31) | (xp << 24) | (xsci << 12);
 183
 184         *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
 185
 186         return 0;
 187 }
 188
 189 static struct {
 190         u16 hps_coeff;
 191         u16 weight_sum;
 192 } hps_v_coeff_tab [] = {
 193  {0x0100,   2},  {0x0102,   4},  {0x0300,   4},  {0x0106,   8},  {0x0502,   8},
 194  {0x0708,   8},  {0x0F00,   8},  {0x011E,  16},  {0x110E,  16},  {0x1926,  16},
 195  {0x3906,  16},  {0x3D42,  16},  {0x7D02,  16},  {0x7F80,  16},  {0xFF00,  16},
 196  {0x01FE,  32},  {0x01FE,  32},  {0x817E,  32},  {0x817E,  32},  {0xC13E,  32},
 197  {0xC13E,  32},  {0xE11E,  32},  {0xE11E,  32},  {0xF10E,  32},  {0xF10E,  32},
 198  {0xF906,  32},  {0xF906,  32},  {0xFD02,  32},  {0xFD02,  32},  {0xFF00,  32},
 199  {0xFF00,  32},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 200  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 201  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 202  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x817E,  64},
 203  {0x817E,  64},  {0xC13E,  64},  {0xC13E,  64},  {0xE11E,  64},  {0xE11E,  64},
 204  {0xF10E,  64},  {0xF10E,  64},  {0xF906,  64},  {0xF906,  64},  {0xFD02,  64},
 205  {0xFD02,  64},  {0xFF00,  64},  {0xFF00,  64},  {0x01FE, 128}
 206 };
 207
 208 /* table of attenuation values for vertical scaling */
 209 static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
 210
 211 /* calculate vertical scale registers */
 212 static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
 213         int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
 214 {
 215         int lpi = 0;
 216
 217         /* vertical scaling */
 218         u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
 219         /* vertical scale & gain */
 220         u32 dcgy = 0, cya_cyb = 0;
 221
 222         /* helper variables */
 223         u32 v_atten = 0, i = 0;
 224
 225         /* error, if vertical zooming */
 226         if ( in_y < out_y ) {
 227                 return -EINVAL;
 228         }
 229
 230         /* linear phase interpolation may be used
 231            if scaling is between 1 and 1/2 (both fields used)
 232            or scaling is between 1/2 and 1/4 (if only one field is used) */
 233
 234         if (V4L2_FIELD_HAS_BOTH(field)) {
 235                 if( 2*out_y >= in_y) {
 236                         lpi = 1;
 237                 }
 238         } else if (field == V4L2_FIELD_TOP
 239                 || field == V4L2_FIELD_ALTERNATE
 240                 || field == V4L2_FIELD_BOTTOM) {
 241                 if( 4*out_y >= in_y ) {
 242                         lpi = 1;
 243                 }
 244                 out_y *= 2;
 245         }
 246         if( 0 != lpi ) {
 247
 248                 yacm = 0;
 249                 yacl = 0;
 250                 cya_cyb = 0x00ff;
 251
 252                 /* calculate scaling increment */
 253                 if ( in_y > out_y )
 254                         ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
 255                 else
 256                         ysci = 0;
 257
 258                 dcgy = 0;
 259
 260                 /* calculate ype and ypo */
 261                 ype = ysci / 16;
 262                 ypo = ype + (ysci / 64);
 263
 264         } else {
 265                 yacm = 1;
 266
 267                 /* calculate scaling increment */
 268                 ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
 269
 270                 /* calculate ype and ypo */
 271                 ypo = ype = ((ysci + 15) / 16);
 272
 273                 /* the sequence length interval (yacl) has to be set according
 274                    to the prescale value, e.g.  [n   .. 1/2) : 0
 275                                                 [1/2 .. 1/3) : 1
 276                                                 [1/3 .. 1/4) : 2
 277                                                 ... */
 278                 if ( ysci < 512) {
 279                         yacl = 0;
 280                 } else {
 281                         yacl = ( ysci / (1024 - ysci) );
 282                 }
 283
 284                 /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
 285                 cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
 286
 287                 /* get best match in the table of attenuations for vertical scaling */
 288                 v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
 289
 290                 for (i = 0; v_attenuation[i] != 0; i++) {
 291                         if (v_attenuation[i] >= v_atten)
 292                                 break;
 293                 }
 294
 295                 dcgy = i;
 296         }
 297
 298         /* ypo and ype swapped in spec ? */
 299         *hps_v_scale    |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
 300
 301         *hps_v_gain     &= ~(MASK_W0|MASK_B2);
 302         *hps_v_gain     |= (dcgy << 16) | (cya_cyb << 0);
 303
 304         return 0;
 305 }
 306
 307 /* simple bubble-sort algorithm with duplicate elimination */
 308 static int sort_and_eliminate(u32* values, int* count)
 309 {
 310         int low = 0, high = 0, top = 0;
 311         int cur = 0, next = 0;
 312
 313         /* sanity checks */
 314         if( (0 > *count) || (NULL == values) ) {
 315                 return -EINVAL;
 316         }
 317
 318         /* bubble sort the first @count items of the array @values */
 319         for( top = *count; top > 0; top--) {
 320                 for( low = 0, high = 1; high < top; low++, high++) {
 321                         if( values[low] > values[high] )
 322                                 swap(values[low], values[high]);
 323                 }
 324         }
 325
 326         /* remove duplicate items */
 327         for( cur = 0, next = 1; next < *count; next++) {
 328                 if( values[cur] != values[next])
 329                         values[++cur] = values[next];
 330         }
 331
 332         *count = cur + 1;
 333
 334         return 0;
 335 }
 336
 337 static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
 338         struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
 339 {
 340         struct saa7146_vv *vv = dev->vv_data;
 341         __le32 *clipping = vv->d_clipping.cpu_addr;
 342
 343         int width = vv->ov.win.w.width;
 344         int height =  vv->ov.win.w.height;
 345         int clipcount = vv->ov.nclips;
 346
 347         u32 line_list[32];
 348         u32 pixel_list[32];
 349         int numdwords = 0;
 350
 351         int i = 0, j = 0;
 352         int cnt_line = 0, cnt_pixel = 0;
 353
 354         int x[32], y[32], w[32], h[32];
 355
 356         /* clear out memory */
 357         memset(&line_list[0],  0x00, sizeof(u32)*32);
 358         memset(&pixel_list[0], 0x00, sizeof(u32)*32);
 359         memset(clipping,  0x00, SAA7146_CLIPPING_MEM);
 360
 361         /* fill the line and pixel-lists */
 362         for(i = 0; i < clipcount; i++) {
 363                 int l = 0, r = 0, t = 0, b = 0;
 364
 365                 x[i] = vv->ov.clips[i].c.left;
 366                 y[i] = vv->ov.clips[i].c.top;
 367                 w[i] = vv->ov.clips[i].c.width;
 368                 h[i] = vv->ov.clips[i].c.height;
 369
 370                 if( w[i] < 0) {
 371                         x[i] += w[i]; w[i] = -w[i];
 372                 }
 373                 if( h[i] < 0) {
 374                         y[i] += h[i]; h[i] = -h[i];
 375                 }
 376                 if( x[i] < 0) {
 377                         w[i] += x[i]; x[i] = 0;
 378                 }
 379                 if( y[i] < 0) {
 380                         h[i] += y[i]; y[i] = 0;
 381                 }
 382                 if( 0 != vv->vflip ) {
 383                         y[i] = height - y[i] - h[i];
 384                 }
 385
 386                 l = x[i];
 387                 r = x[i]+w[i];
 388                 t = y[i];
 389                 b = y[i]+h[i];
 390
 391                 /* insert left/right coordinates */
 392                 pixel_list[ 2*i   ] = min_t(int, l, width);
 393                 pixel_list[(2*i)+1] = min_t(int, r, width);
 394                 /* insert top/bottom coordinates */
 395                 line_list[ 2*i   ] = min_t(int, t, height);
 396                 line_list[(2*i)+1] = min_t(int, b, height);
 397         }
 398
 399         /* sort and eliminate lists */
 400         cnt_line = cnt_pixel = 2*clipcount;
 401         sort_and_eliminate( &pixel_list[0], &cnt_pixel );
 402         sort_and_eliminate( &line_list[0], &cnt_line );
 403
 404         /* calculate the number of used u32s */
 405         numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
 406         numdwords = max_t(int, 4, numdwords);
 407         numdwords = min_t(int, 64, numdwords);
 408
 409         /* fill up cliptable */
 410         for(i = 0; i < cnt_pixel; i++) {
 411                 clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
 412         }
 413         for(i = 0; i < cnt_line; i++) {
 414                 clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
 415         }
 416
 417         /* fill up cliptable with the display infos */
 418         for(j = 0; j < clipcount; j++) {
 419
 420                 for(i = 0; i < cnt_pixel; i++) {
 421
 422                         if( x[j] < 0)
 423                                 x[j] = 0;
 424
 425                         if( pixel_list[i] < (x[j] + w[j])) {
 426
 427                                 if ( pixel_list[i] >= x[j] ) {
 428                                         clipping[2*i] |= cpu_to_le32(1 << j);
 429                                 }
 430                         }
 431                 }
 432                 for(i = 0; i < cnt_line; i++) {
 433
 434                         if( y[j] < 0)
 435                                 y[j] = 0;
 436
 437                         if( line_list[i] < (y[j] + h[j]) ) {
 438
 439                                 if( line_list[i] >= y[j] ) {
 440                                         clipping[(2*i)+1] |= cpu_to_le32(1 << j);
 441                                 }
 442                         }
 443                 }
 444         }
 445
 446         /* adjust arbitration control register */
 447         *arbtr_ctrl &= 0xffff00ff;
 448         *arbtr_ctrl |= 0x00001c00;
 449
 450         vdma2->base_even        = vv->d_clipping.dma_handle;
 451         vdma2->base_odd         = vv->d_clipping.dma_handle;
 452         vdma2->prot_addr        = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
 453         vdma2->base_page        = 0x04;
 454         vdma2->pitch            = 0x00;
 455         vdma2->num_line_byte    = (0 << 16 | (sizeof(u32))*(numdwords-1) );
 456
 457         /* set clipping-mode. this depends on the field(s) used */
 458         *clip_format &= 0xfffffff7;
 459         if (V4L2_FIELD_HAS_BOTH(field)) {
 460                 *clip_format |= 0x00000008;
 461         } else {
 462                 *clip_format |= 0x00000000;
 463         }
 464 }
 465
 466 /* disable clipping */
 467 static void saa7146_disable_clipping(struct saa7146_dev *dev)
 468 {
 469         u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 470
 471         /* mask out relevant bits (=lower word)*/
 472         clip_format &= MASK_W1;
 473
 474         /* upload clipping-registers*/
 475         saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
 476         saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 477
 478         /* disable video dma2 */
 479         saa7146_write(dev, MC1, MASK_21);
 480 }
 481
 482 static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
 483 {
 484         struct saa7146_dev *dev = fh->dev;
 485         struct saa7146_vv *vv = dev->vv_data;
 486         enum v4l2_field field = vv->ov.win.field;
 487         struct  saa7146_video_dma vdma2;
 488         u32 clip_format;
 489         u32 arbtr_ctrl;
 490
 491         /* check clipcount, disable clipping if clipcount == 0*/
 492         if (vv->ov.nclips == 0) {
 493                 saa7146_disable_clipping(dev);
 494                 return;
 495         }
 496
 497         clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 498         arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
 499
 500         calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
 501
 502         /* set clipping format */
 503         clip_format &= 0xffff0008;
 504         clip_format |= (SAA7146_CLIPPING_RECT << 4);
 505
 506         /* prepare video dma2 */
 507         saa7146_write(dev, BASE_EVEN2,          vdma2.base_even);
 508         saa7146_write(dev, BASE_ODD2,           vdma2.base_odd);
 509         saa7146_write(dev, PROT_ADDR2,          vdma2.prot_addr);
 510         saa7146_write(dev, BASE_PAGE2,          vdma2.base_page);
 511         saa7146_write(dev, PITCH2,              vdma2.pitch);
 512         saa7146_write(dev, NUM_LINE_BYTE2,      vdma2.num_line_byte);
 513
 514         /* prepare the rest */
 515         saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
 516         saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
 517
 518         /* upload clip_control-register, clipping-registers, enable video dma2 */
 519         saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
 520         saa7146_write(dev, MC1, (MASK_05 | MASK_21));
 521 }
 522
 523 static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
 524 {
 525         struct saa7146_vv *vv = dev->vv_data;
 526
 527         int source = vv->current_hps_source;
 528         int sync = vv->current_hps_sync;
 529
 530         u32 hps_v_scale = 0, hps_v_gain  = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
 531
 532         /* set vertical scale */
 533         hps_v_scale = 0; /* all bits get set by the function-call */
 534         hps_v_gain  = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
 535         calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
 536
 537         /* set horizontal scale */
 538         hps_ctrl        = 0;
 539         hps_h_prescale  = 0; /* all bits get set in the function */
 540         hps_h_scale     = 0;
 541         calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
 542
 543         /* set hyo and hxo */
 544         calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
 545         calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
 546
 547         /* write out new register contents */
 548         saa7146_write(dev, HPS_V_SCALE, hps_v_scale);
 549         saa7146_write(dev, HPS_V_GAIN,  hps_v_gain);
 550         saa7146_write(dev, HPS_CTRL,    hps_ctrl);
 551         saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
 552         saa7146_write(dev, HPS_H_SCALE, hps_h_scale);
 553
 554         /* upload shadow-ram registers */
 555         saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
 556 }
 557
 558 /* calculate the new memory offsets for a desired position */
 559 static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
 560 {
 561         struct saa7146_vv *vv = dev->vv_data;
 562         struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
 563
 564         int b_depth = vv->ov_fmt->depth;
 565         int b_bpl = vv->ov_fb.fmt.bytesperline;
 566         /* The unsigned long cast is to remove a 64-bit compile warning since
 567            it looks like a 64-bit address is cast to a 32-bit value, even
 568            though the base pointer is really a 32-bit physical address that
 569            goes into a 32-bit DMA register.
 570            FIXME: might not work on some 64-bit platforms, but see the FIXME
 571            in struct v4l2_framebuffer (videodev2.h) for that.
 572          */
 573         u32 base = (u32)(unsigned long)vv->ov_fb.base;
 574
 575         struct  saa7146_video_dma vdma1;
 576
 577         /* calculate memory offsets for picture, look if we shall top-down-flip */
 578         vdma1.pitch     = 2*b_bpl;
 579         if ( 0 == vv->vflip ) {
 580                 vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
 581                 vdma1.base_odd  = vdma1.base_even + (vdma1.pitch / 2);
 582                 vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
 583         }
 584         else {
 585                 vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
 586                 vdma1.base_odd  = vdma1.base_even - (vdma1.pitch / 2);
 587                 vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
 588         }
 589
 590         if (V4L2_FIELD_HAS_BOTH(field)) {
 591         } else if (field == V4L2_FIELD_ALTERNATE) {
 592                 /* fixme */
 593                 vdma1.base_odd = vdma1.prot_addr;
 594                 vdma1.pitch /= 2;
 595         } else if (field == V4L2_FIELD_TOP) {
 596                 vdma1.base_odd = vdma1.prot_addr;
 597                 vdma1.pitch /= 2;
 598         } else if (field == V4L2_FIELD_BOTTOM) {
 599                 vdma1.base_odd = vdma1.base_even;
 600                 vdma1.base_even = vdma1.prot_addr;
 601                 vdma1.pitch /= 2;
 602         }
 603
 604         if ( 0 != vv->vflip ) {
 605                 vdma1.pitch *= -1;
 606         }
 607
 608         vdma1.base_page = sfmt->swap;
 609         vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
 610
 611         saa7146_write_out_dma(dev, 1, &vdma1);
 612 }
 613
 614 static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
 615 {
 616         u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 617
 618         /* call helper function */
 619         calculate_output_format_register(dev,palette,&clip_format);
 620
 621         /* update the hps registers */
 622         saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
 623         saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 624 }
 625
 626 /* select input-source */
 627 void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
 628 {
 629         struct saa7146_vv *vv = dev->vv_data;
 630         u32 hps_ctrl = 0;
 631
 632         /* read old state */
 633         hps_ctrl = saa7146_read(dev, HPS_CTRL);
 634
 635         hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
 636         hps_ctrl |= (source << 30) | (sync << 28);
 637
 638         /* write back & upload register */
 639         saa7146_write(dev, HPS_CTRL, hps_ctrl);
 640         saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 641
 642         vv->current_hps_source = source;
 643         vv->current_hps_sync = sync;
 644 }
 645 EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
 646
 647 int saa7146_enable_overlay(struct saa7146_fh *fh)
 648 {
 649         struct saa7146_dev *dev = fh->dev;
 650         struct saa7146_vv *vv = dev->vv_data;
 651
 652         saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field);
 653         saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat);
 654         saa7146_set_output_format(dev, vv->ov_fmt->trans);
 655         saa7146_set_clipping_rect(fh);
 656
 657         /* enable video dma1 */
 658         saa7146_write(dev, MC1, (MASK_06 | MASK_22));
 659         return 0;
 660 }
 661
 662 void saa7146_disable_overlay(struct saa7146_fh *fh)
 663 {
 664         struct saa7146_dev *dev = fh->dev;
 665
 666         /* disable clipping + video dma1 */
 667         saa7146_disable_clipping(dev);
 668         saa7146_write(dev, MC1, MASK_22);
 669 }
 670
 671 void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
 672 {
 673         int where = 0;
 674
 675         if( which < 1 || which > 3) {
 676                 return;
 677         }
 678
 679         /* calculate starting address */
 680         where  = (which-1)*0x18;
 681
 682         saa7146_write(dev, where,       vdma->base_odd);
 683         saa7146_write(dev, where+0x04,  vdma->base_even);
 684         saa7146_write(dev, where+0x08,  vdma->prot_addr);
 685         saa7146_write(dev, where+0x0c,  vdma->pitch);
 686         saa7146_write(dev, where+0x10,  vdma->base_page);
 687         saa7146_write(dev, where+0x14,  vdma->num_line_byte);
 688
 689         /* upload */
 690         saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
 691 /*
 692         printk("vdma%d.base_even:     0x%08x\n", which,vdma->base_even);
 693         printk("vdma%d.base_odd:      0x%08x\n", which,vdma->base_odd);
 694         printk("vdma%d.prot_addr:     0x%08x\n", which,vdma->prot_addr);
 695         printk("vdma%d.base_page:     0x%08x\n", which,vdma->base_page);
 696         printk("vdma%d.pitch:         0x%08x\n", which,vdma->pitch);
 697         printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
 698 */
 699 }
 700
 701 static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
 702 {
 703         struct saa7146_vv *vv = dev->vv_data;
 704         struct saa7146_video_dma vdma1;
 705
 706         struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 707
 708         int width = buf->fmt->width;
 709         int height = buf->fmt->height;
 710         int bytesperline = buf->fmt->bytesperline;
 711         enum v4l2_field field = buf->fmt->field;
 712
 713         int depth = sfmt->depth;
 714
 715         DEB_CAP("[size=%dx%d,fields=%s]\n",
 716                 width, height, v4l2_field_names[field]);
 717
 718         if( bytesperline != 0) {
 719                 vdma1.pitch = bytesperline*2;
 720         } else {
 721                 vdma1.pitch = (width*depth*2)/8;
 722         }
 723         vdma1.num_line_byte     = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
 724         vdma1.base_page         = buf->pt[0].dma | ME1 | sfmt->swap;
 725
 726         if( 0 != vv->vflip ) {
 727                 vdma1.prot_addr = buf->pt[0].offset;
 728                 vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height;
 729                 vdma1.base_odd  = vdma1.base_even - (vdma1.pitch/2);
 730         } else {
 731                 vdma1.base_even = buf->pt[0].offset;
 732                 vdma1.base_odd  = vdma1.base_even + (vdma1.pitch/2);
 733                 vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height;
 734         }
 735
 736         if (V4L2_FIELD_HAS_BOTH(field)) {
 737         } else if (field == V4L2_FIELD_ALTERNATE) {
 738                 /* fixme */
 739                 if ( vv->last_field == V4L2_FIELD_TOP ) {
 740                         vdma1.base_odd  = vdma1.prot_addr;
 741                         vdma1.pitch /= 2;
 742                 } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
 743                         vdma1.base_odd  = vdma1.base_even;
 744                         vdma1.base_even = vdma1.prot_addr;
 745                         vdma1.pitch /= 2;
 746                 }
 747         } else if (field == V4L2_FIELD_TOP) {
 748                 vdma1.base_odd  = vdma1.prot_addr;
 749                 vdma1.pitch /= 2;
 750         } else if (field == V4L2_FIELD_BOTTOM) {
 751                 vdma1.base_odd  = vdma1.base_even;
 752                 vdma1.base_even = vdma1.prot_addr;
 753                 vdma1.pitch /= 2;
 754         }
 755
 756         if( 0 != vv->vflip ) {
 757                 vdma1.pitch *= -1;
 758         }
 759
 760         saa7146_write_out_dma(dev, 1, &vdma1);
 761         return 0;
 762 }
 763
 764 static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
 765 {
 766         int height = buf->fmt->height;
 767         int width = buf->fmt->width;
 768
 769         vdma2->pitch    = width;
 770         vdma3->pitch    = width;
 771
 772         /* fixme: look at bytesperline! */
 773
 774         if( 0 != vv->vflip ) {
 775                 vdma2->prot_addr        = buf->pt[1].offset;
 776                 vdma2->base_even        = ((vdma2->pitch/2)*height)+buf->pt[1].offset;
 777                 vdma2->base_odd         = vdma2->base_even - (vdma2->pitch/2);
 778
 779                 vdma3->prot_addr        = buf->pt[2].offset;
 780                 vdma3->base_even        = ((vdma3->pitch/2)*height)+buf->pt[2].offset;
 781                 vdma3->base_odd         = vdma3->base_even - (vdma3->pitch/2);
 782         } else {
 783                 vdma3->base_even        = buf->pt[2].offset;
 784                 vdma3->base_odd         = vdma3->base_even + (vdma3->pitch/2);
 785                 vdma3->prot_addr        = (vdma3->pitch/2)*height+buf->pt[2].offset;
 786
 787                 vdma2->base_even        = buf->pt[1].offset;
 788                 vdma2->base_odd         = vdma2->base_even + (vdma2->pitch/2);
 789                 vdma2->prot_addr        = (vdma2->pitch/2)*height+buf->pt[1].offset;
 790         }
 791
 792         return 0;
 793 }
 794
 795 static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
 796 {
 797         int height = buf->fmt->height;
 798         int width = buf->fmt->width;
 799
 800         vdma2->pitch    = width/2;
 801         vdma3->pitch    = width/2;
 802
 803         if( 0 != vv->vflip ) {
 804                 vdma2->prot_addr        = buf->pt[2].offset;
 805                 vdma2->base_even        = ((vdma2->pitch/2)*height)+buf->pt[2].offset;
 806                 vdma2->base_odd         = vdma2->base_even - (vdma2->pitch/2);
 807
 808                 vdma3->prot_addr        = buf->pt[1].offset;
 809                 vdma3->base_even        = ((vdma3->pitch/2)*height)+buf->pt[1].offset;
 810                 vdma3->base_odd         = vdma3->base_even - (vdma3->pitch/2);
 811
 812         } else {
 813                 vdma3->base_even        = buf->pt[2].offset;
 814                 vdma3->base_odd         = vdma3->base_even + (vdma3->pitch);
 815                 vdma3->prot_addr        = (vdma3->pitch/2)*height+buf->pt[2].offset;
 816
 817                 vdma2->base_even        = buf->pt[1].offset;
 818                 vdma2->base_odd         = vdma2->base_even + (vdma2->pitch);
 819                 vdma2->prot_addr        = (vdma2->pitch/2)*height+buf->pt[1].offset;
 820         }
 821         return 0;
 822 }
 823
 824 static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
 825 {
 826         struct saa7146_vv *vv = dev->vv_data;
 827         struct saa7146_video_dma vdma1;
 828         struct saa7146_video_dma vdma2;
 829         struct saa7146_video_dma vdma3;
 830
 831         struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 832
 833         int width = buf->fmt->width;
 834         int height = buf->fmt->height;
 835         enum v4l2_field field = buf->fmt->field;
 836
 837         BUG_ON(0 == buf->pt[0].dma);
 838         BUG_ON(0 == buf->pt[1].dma);
 839         BUG_ON(0 == buf->pt[2].dma);
 840
 841         DEB_CAP("[size=%dx%d,fields=%s]\n",
 842                 width, height, v4l2_field_names[field]);
 843
 844         /* fixme: look at bytesperline! */
 845
 846         /* fixme: what happens for user space buffers here?. The offsets are
 847            most likely wrong, this version here only works for page-aligned
 848            buffers, modifications to the pagetable-functions are necessary...*/
 849
 850         vdma1.pitch             = width*2;
 851         vdma1.num_line_byte     = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
 852         vdma1.base_page         = buf->pt[0].dma | ME1;
 853
 854         if( 0 != vv->vflip ) {
 855                 vdma1.prot_addr = buf->pt[0].offset;
 856                 vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset;
 857                 vdma1.base_odd  = vdma1.base_even - (vdma1.pitch/2);
 858         } else {
 859                 vdma1.base_even = buf->pt[0].offset;
 860                 vdma1.base_odd  = vdma1.base_even + (vdma1.pitch/2);
 861                 vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset;
 862         }
 863
 864         vdma2.num_line_byte     = 0; /* unused */
 865         vdma2.base_page         = buf->pt[1].dma | ME1;
 866
 867         vdma3.num_line_byte     = 0; /* unused */
 868         vdma3.base_page         = buf->pt[2].dma | ME1;
 869
 870         switch( sfmt->depth ) {
 871                 case 12: {
 872                         calc_planar_420(vv,buf,&vdma2,&vdma3);
 873                         break;
 874                 }
 875                 case 16: {
 876                         calc_planar_422(vv,buf,&vdma2,&vdma3);
 877                         break;
 878                 }
 879                 default: {
 880                         return -1;
 881                 }
 882         }
 883
 884         if (V4L2_FIELD_HAS_BOTH(field)) {
 885         } else if (field == V4L2_FIELD_ALTERNATE) {
 886                 /* fixme */
 887                 vdma1.base_odd  = vdma1.prot_addr;
 888                 vdma1.pitch /= 2;
 889                 vdma2.base_odd  = vdma2.prot_addr;
 890                 vdma2.pitch /= 2;
 891                 vdma3.base_odd  = vdma3.prot_addr;
 892                 vdma3.pitch /= 2;
 893         } else if (field == V4L2_FIELD_TOP) {
 894                 vdma1.base_odd  = vdma1.prot_addr;
 895                 vdma1.pitch /= 2;
 896                 vdma2.base_odd  = vdma2.prot_addr;
 897                 vdma2.pitch /= 2;
 898                 vdma3.base_odd  = vdma3.prot_addr;
 899                 vdma3.pitch /= 2;
 900         } else if (field == V4L2_FIELD_BOTTOM) {
 901                 vdma1.base_odd  = vdma1.base_even;
 902                 vdma1.base_even = vdma1.prot_addr;
 903                 vdma1.pitch /= 2;
 904                 vdma2.base_odd  = vdma2.base_even;
 905                 vdma2.base_even = vdma2.prot_addr;
 906                 vdma2.pitch /= 2;
 907                 vdma3.base_odd  = vdma3.base_even;
 908                 vdma3.base_even = vdma3.prot_addr;
 909                 vdma3.pitch /= 2;
 910         }
 911
 912         if( 0 != vv->vflip ) {
 913                 vdma1.pitch *= -1;
 914                 vdma2.pitch *= -1;
 915                 vdma3.pitch *= -1;
 916         }
 917
 918         saa7146_write_out_dma(dev, 1, &vdma1);
 919         if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
 920                 saa7146_write_out_dma(dev, 3, &vdma2);
 921                 saa7146_write_out_dma(dev, 2, &vdma3);
 922         } else {
 923                 saa7146_write_out_dma(dev, 2, &vdma2);
 924                 saa7146_write_out_dma(dev, 3, &vdma3);
 925         }
 926         return 0;
 927 }
 928
 929 static void program_capture_engine(struct saa7146_dev *dev, int planar)
 930 {
 931         struct saa7146_vv *vv = dev->vv_data;
 932         int count = 0;
 933
 934         unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
 935         unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
 936
 937         /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
 938         WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
 939         WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
 940
 941         /* set rps register 0 */
 942         WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
 943         WRITE_RPS0(MASK_27 | MASK_11);
 944
 945         /* turn on video-dma1 */
 946         WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 947         WRITE_RPS0(MASK_06 | MASK_22);                  /* => mask */
 948         WRITE_RPS0(MASK_06 | MASK_22);                  /* => values */
 949         if( 0 != planar ) {
 950                 /* turn on video-dma2 */
 951                 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 952                 WRITE_RPS0(MASK_05 | MASK_21);                  /* => mask */
 953                 WRITE_RPS0(MASK_05 | MASK_21);                  /* => values */
 954
 955                 /* turn on video-dma3 */
 956                 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 957                 WRITE_RPS0(MASK_04 | MASK_20);                  /* => mask */
 958                 WRITE_RPS0(MASK_04 | MASK_20);                  /* => values */
 959         }
 960
 961         /* wait for o_fid_a/b / e_fid_a/b toggle */
 962         if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
 963                 WRITE_RPS0(CMD_PAUSE | o_wait);
 964                 WRITE_RPS0(CMD_PAUSE | e_wait);
 965         } else if ( vv->last_field == V4L2_FIELD_TOP ) {
 966                 WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
 967                 WRITE_RPS0(CMD_PAUSE | o_wait);
 968         } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
 969                 WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
 970                 WRITE_RPS0(CMD_PAUSE | e_wait);
 971         }
 972
 973         /* turn off video-dma1 */
 974         WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 975         WRITE_RPS0(MASK_22 | MASK_06);                  /* => mask */
 976         WRITE_RPS0(MASK_22);                            /* => values */
 977         if( 0 != planar ) {
 978                 /* turn off video-dma2 */
 979                 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 980                 WRITE_RPS0(MASK_05 | MASK_21);                  /* => mask */
 981                 WRITE_RPS0(MASK_21);                            /* => values */
 982
 983                 /* turn off video-dma3 */
 984                 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 985                 WRITE_RPS0(MASK_04 | MASK_20);                  /* => mask */
 986                 WRITE_RPS0(MASK_20);                            /* => values */
 987         }
 988
 989         /* generate interrupt */
 990         WRITE_RPS0(CMD_INTERRUPT);
 991
 992         /* stop */
 993         WRITE_RPS0(CMD_STOP);
 994 }
 995
 996 void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
 997 {
 998         struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 999         struct saa7146_vv *vv = dev->vv_data;
1000         u32 vdma1_prot_addr;
1001
1002         DEB_CAP("buf:%p, next:%p\n", buf, next);
1003
1004         vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
1005         if( 0 == vdma1_prot_addr ) {
1006                 /* clear out beginning of streaming bit (rps register 0)*/
1007                 DEB_CAP("forcing sync to new frame\n");
1008                 saa7146_write(dev, MC2, MASK_27 );
1009         }
1010
1011         saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
1012         saa7146_set_output_format(dev, sfmt->trans);
1013         saa7146_disable_clipping(dev);
1014
1015         if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
1016         } else if ( vv->last_field == V4L2_FIELD_TOP ) {
1017                 vv->last_field = V4L2_FIELD_BOTTOM;
1018         } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
1019                 vv->last_field = V4L2_FIELD_TOP;
1020         }
1021
1022         if( 0 != IS_PLANAR(sfmt->trans)) {
1023                 calculate_video_dma_grab_planar(dev, buf);
1024                 program_capture_engine(dev,1);
1025         } else {
1026                 calculate_video_dma_grab_packed(dev, buf);
1027                 program_capture_engine(dev,0);
1028         }
1029
1030 /*
1031         printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
1032         printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
1033         printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
1034         printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
1035         printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
1036         printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
1037         printk("vdma%d => vptr      : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
1038 */
1039
1040         /* write the address of the rps-program */
1041         saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
1042
1043         /* turn on rps */
1044         saa7146_write(dev, MC1, (MASK_12 | MASK_28));
1045 }