Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / isdn / i4l / Kconfig
1 #
2 # Old ISDN4Linux config
3 #
4
5 if ISDN_I4L
6
7 config ISDN_PPP
8         bool "Support synchronous PPP"
9         depends on INET
10         select SLHC
11         help
12           Over digital connections such as ISDN, there is no need to
13           synchronize sender and recipient's clocks with start and stop bits
14           as is done over analog telephone lines. Instead, one can use
15           "synchronous PPP". Saying Y here will include this protocol. This
16           protocol is used by Cisco and Sun for example. So you want to say Y
17           here if the other end of your ISDN connection supports it. You will
18           need a special version of pppd (called ipppd) for using this
19           feature. See <file:Documentation/isdn/README.syncppp> and
20           <file:Documentation/isdn/syncPPP.FAQ> for more information.
21
22 config ISDN_PPP_VJ
23         bool "Use VJ-compression with synchronous PPP"
24         depends on ISDN_PPP
25         help
26           This enables Van Jacobson header compression for synchronous PPP.
27           Say Y if the other end of the connection supports it.
28
29 config ISDN_MPP
30         bool "Support generic MP (RFC 1717)"
31         depends on ISDN_PPP
32         help
33           With synchronous PPP enabled, it is possible to increase throughput
34           by bundling several ISDN-connections, using this protocol. See
35           <file:Documentation/isdn/README.syncppp> for more information.
36
37 config IPPP_FILTER
38         bool "Filtering for synchronous PPP"
39         depends on ISDN_PPP
40         help
41           Say Y here if you want to be able to filter the packets passing over
42           IPPP interfaces.  This allows you to control which packets count as
43           activity (i.e. which packets will reset the idle timer or bring up
44           a demand-dialled link) and which packets are to be dropped entirely.
45           You need to say Y here if you wish to use the pass-filter and
46           active-filter options to ipppd.
47
48 config ISDN_PPP_BSDCOMP
49         tristate "Support BSD compression"
50         depends on ISDN_PPP
51         help
52           Support for the BSD-Compress compression method for PPP, which uses
53           the LZW compression method to compress each PPP packet before it is
54           sent over the wire. The machine at the other end of the PPP link
55           (usually your ISP) has to support the BSD-Compress compression
56           method as well for this to be useful. Even if they don't support it,
57           it is safe to say Y here.
58
59 config ISDN_AUDIO
60         bool "Support audio via ISDN"
61         help
62           If you say Y here, the modem-emulator will support a subset of the
63           EIA Class 8 Voice commands. Using a getty with voice-support
64           (mgetty+sendfax by <gert@greenie.muc.de> with an extension, available
65           with the ISDN utility package for example), you will be able to use
66           your Linux box as an ISDN-answering machine. Of course, this must be
67           supported by the lowlevel driver also. Currently, the HiSax driver
68           is the only voice-supporting driver. See
69           <file:Documentation/isdn/README.audio> for more information.
70
71 config ISDN_TTY_FAX
72         bool "Support AT-Fax Class 1 and 2 commands"
73         depends on ISDN_AUDIO
74         help
75           If you say Y here, the modem-emulator will support a subset of the
76           Fax Class 1 and 2 commands. Using a getty with fax-support
77           (mgetty+sendfax, hylafax), you will be able to use your Linux box as
78           an ISDN-fax-machine. This must be supported by the lowlevel driver
79           also. See <file:Documentation/isdn/README.fax> for more information.
80
81 config ISDN_X25
82         bool "X.25 PLP on top of ISDN"
83         depends on X25
84         help
85           This feature provides the X.25 protocol over ISDN connections.
86           See <file:Documentation/isdn/README.x25> for more information
87           if you are thinking about using this.
88
89
90 menu "ISDN feature submodules"
91
92 config ISDN_DRV_LOOP
93         tristate "isdnloop support"
94         depends on BROKEN_ON_SMP
95         help
96           This driver provides a virtual ISDN card. Its primary purpose is
97           testing of linklevel features or configuration without getting
98           charged by your service-provider for lots of phone calls.
99           You need will need the loopctrl utility from the latest isdn4k-utils
100           package to set up this driver.
101
102 config ISDN_DIVERSION
103         tristate "Support isdn diversion services"
104         help
105           This option allows you to use some supplementary diversion
106           services in conjunction with the HiSax driver on an EURO/DSS1
107           line.
108
109           Supported options are CD (call deflection), CFU (Call forward
110           unconditional), CFB (Call forward when busy) and CFNR (call forward
111           not reachable). Additionally the actual CFU, CFB and CFNR state may
112           be interrogated.
113
114           The use of CFU, CFB, CFNR and interrogation may be limited to some
115           countries. The keypad protocol is still not implemented. CD should
116           work in all countries if the service has been subscribed to.
117
118           Please read the file <file:Documentation/isdn/README.diversion>.
119
120 endmenu
121
122 comment "ISDN4Linux hardware drivers"
123
124 source "drivers/isdn/hisax/Kconfig"
125
126
127 menu "Active cards"
128
129 source "drivers/isdn/icn/Kconfig"
130
131 source "drivers/isdn/pcbit/Kconfig"
132
133 source "drivers/isdn/sc/Kconfig"
134
135 source "drivers/isdn/act2000/Kconfig"
136
137 endmenu
138 # end ISDN_I4L
139 endif
140