Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / input / serio / apbps2.c
1 /*
2  * Copyright (C) 2013 Aeroflex Gaisler
3  *
4  * This driver supports the APBPS2 PS/2 core available in the GRLIB
5  * VHDL IP core library.
6  *
7  * Full documentation of the APBPS2 core can be found here:
8  * http://www.gaisler.com/products/grlib/grip.pdf
9  *
10  * See "Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt" for
11  * information on open firmware properties.
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License as published by
15  * the Free Software Foundation; either version 2 of the License, or
16  * (at your option) any later version.
17  *
18  * Contributors: Daniel Hellstrom <daniel@gaisler.com>
19  */
20 #include <linux/platform_device.h>
21 #include <linux/of_device.h>
22 #include <linux/module.h>
23 #include <linux/serio.h>
24 #include <linux/errno.h>
25 #include <linux/interrupt.h>
26 #include <linux/of_irq.h>
27 #include <linux/device.h>
28 #include <linux/delay.h>
29 #include <linux/err.h>
30 #include <linux/slab.h>
31 #include <linux/string.h>
32 #include <linux/kernel.h>
33 #include <linux/io.h>
34
35 struct apbps2_regs {
36         u32 __iomem data;       /* 0x00 */
37         u32 __iomem status;     /* 0x04 */
38         u32 __iomem ctrl;       /* 0x08 */
39         u32 __iomem reload;     /* 0x0c */
40 };
41
42 #define APBPS2_STATUS_DR        (1<<0)
43 #define APBPS2_STATUS_PE        (1<<1)
44 #define APBPS2_STATUS_FE        (1<<2)
45 #define APBPS2_STATUS_KI        (1<<3)
46 #define APBPS2_STATUS_RF        (1<<4)
47 #define APBPS2_STATUS_TF        (1<<5)
48 #define APBPS2_STATUS_TCNT      (0x1f<<22)
49 #define APBPS2_STATUS_RCNT      (0x1f<<27)
50
51 #define APBPS2_CTRL_RE          (1<<0)
52 #define APBPS2_CTRL_TE          (1<<1)
53 #define APBPS2_CTRL_RI          (1<<2)
54 #define APBPS2_CTRL_TI          (1<<3)
55
56 struct apbps2_priv {
57         struct serio            *io;
58         struct apbps2_regs      *regs;
59 };
60
61 static int apbps2_idx;
62
63 static irqreturn_t apbps2_isr(int irq, void *dev_id)
64 {
65         struct apbps2_priv *priv = dev_id;
66         unsigned long status, data, rxflags;
67         irqreturn_t ret = IRQ_NONE;
68
69         while ((status = ioread32be(&priv->regs->status)) & APBPS2_STATUS_DR) {
70                 data = ioread32be(&priv->regs->data);
71                 rxflags = (status & APBPS2_STATUS_PE) ? SERIO_PARITY : 0;
72                 rxflags |= (status & APBPS2_STATUS_FE) ? SERIO_FRAME : 0;
73
74                 /* clear error bits? */
75                 if (rxflags)
76                         iowrite32be(0, &priv->regs->status);
77
78                 serio_interrupt(priv->io, data, rxflags);
79
80                 ret = IRQ_HANDLED;
81         }
82
83         return ret;
84 }
85
86 static int apbps2_write(struct serio *io, unsigned char val)
87 {
88         struct apbps2_priv *priv = io->port_data;
89         unsigned int tleft = 10000; /* timeout in 100ms */
90
91         /* delay until PS/2 controller has room for more chars */
92         while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_TF) && tleft--)
93                 udelay(10);
94
95         if ((ioread32be(&priv->regs->status) & APBPS2_STATUS_TF) == 0) {
96                 iowrite32be(val, &priv->regs->data);
97
98                 iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI | APBPS2_CTRL_TE,
99                                 &priv->regs->ctrl);
100                 return 0;
101         }
102
103         return -ETIMEDOUT;
104 }
105
106 static int apbps2_open(struct serio *io)
107 {
108         struct apbps2_priv *priv = io->port_data;
109         int limit;
110         unsigned long tmp;
111
112         /* clear error flags */
113         iowrite32be(0, &priv->regs->status);
114
115         /* Clear old data if available (unlikely) */
116         limit = 1024;
117         while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_DR) && --limit)
118                 tmp = ioread32be(&priv->regs->data);
119
120         /* Enable reciever and it's interrupt */
121         iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI, &priv->regs->ctrl);
122
123         return 0;
124 }
125
126 static void apbps2_close(struct serio *io)
127 {
128         struct apbps2_priv *priv = io->port_data;
129
130         /* stop interrupts at PS/2 HW level */
131         iowrite32be(0, &priv->regs->ctrl);
132 }
133
134 /* Initialize one APBPS2 PS/2 core */
135 static int apbps2_of_probe(struct platform_device *ofdev)
136 {
137         struct apbps2_priv *priv;
138         int irq, err;
139         u32 freq_hz;
140         struct resource *res;
141
142         priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
143         if (!priv) {
144                 dev_err(&ofdev->dev, "memory allocation failed\n");
145                 return -ENOMEM;
146         }
147
148         /* Find Device Address */
149         res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
150         priv->regs = devm_ioremap_resource(&ofdev->dev, res);
151         if (IS_ERR(priv->regs))
152                 return PTR_ERR(priv->regs);
153
154         /* Reset hardware, disable interrupt */
155         iowrite32be(0, &priv->regs->ctrl);
156
157         /* IRQ */
158         irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
159         err = devm_request_irq(&ofdev->dev, irq, apbps2_isr,
160                                 IRQF_SHARED, "apbps2", priv);
161         if (err) {
162                 dev_err(&ofdev->dev, "request IRQ%d failed\n", irq);
163                 return err;
164         }
165
166         /* Get core frequency */
167         if (of_property_read_u32(ofdev->dev.of_node, "freq", &freq_hz)) {
168                 dev_err(&ofdev->dev, "unable to get core frequency\n");
169                 return -EINVAL;
170         }
171
172         /* Set reload register to core freq in kHz/10 */
173         iowrite32be(freq_hz / 10000, &priv->regs->reload);
174
175         priv->io = kzalloc(sizeof(struct serio), GFP_KERNEL);
176         if (!priv->io)
177                 return -ENOMEM;
178
179         priv->io->id.type = SERIO_8042;
180         priv->io->open = apbps2_open;
181         priv->io->close = apbps2_close;
182         priv->io->write = apbps2_write;
183         priv->io->port_data = priv;
184         strlcpy(priv->io->name, "APBPS2 PS/2", sizeof(priv->io->name));
185         snprintf(priv->io->phys, sizeof(priv->io->phys),
186                  "apbps2_%d", apbps2_idx++);
187
188         dev_info(&ofdev->dev, "irq = %d, base = 0x%p\n", irq, priv->regs);
189
190         serio_register_port(priv->io);
191
192         platform_set_drvdata(ofdev, priv);
193
194         return 0;
195 }
196
197 static int apbps2_of_remove(struct platform_device *of_dev)
198 {
199         struct apbps2_priv *priv = platform_get_drvdata(of_dev);
200
201         serio_unregister_port(priv->io);
202
203         return 0;
204 }
205
206 static const struct of_device_id apbps2_of_match[] = {
207         { .name = "GAISLER_APBPS2", },
208         { .name = "01_060", },
209         {}
210 };
211
212 MODULE_DEVICE_TABLE(of, apbps2_of_match);
213
214 static struct platform_driver apbps2_of_driver = {
215         .driver = {
216                 .name = "grlib-apbps2",
217                 .of_match_table = apbps2_of_match,
218         },
219         .probe = apbps2_of_probe,
220         .remove = apbps2_of_remove,
221 };
222
223 module_platform_driver(apbps2_of_driver);
224
225 MODULE_AUTHOR("Aeroflex Gaisler AB.");
226 MODULE_DESCRIPTION("GRLIB APBPS2 PS/2 serial I/O");
227 MODULE_LICENSE("GPL");