Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / input / mouse / gpio_mouse.c
1 /*
2  * Driver for simulating a mouse on GPIO lines.
3  *
4  * Copyright (C) 2007 Atmel Corporation
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #include <linux/module.h>
12 #include <linux/platform_device.h>
13 #include <linux/input-polldev.h>
14 #include <linux/gpio.h>
15 #include <linux/gpio_mouse.h>
16
17
18 /*
19  * Timer function which is run every scan_ms ms when the device is opened.
20  * The dev input variable is set to the the input_dev pointer.
21  */
22 static void gpio_mouse_scan(struct input_polled_dev *dev)
23 {
24         struct gpio_mouse_platform_data *gpio = dev->private;
25         struct input_dev *input = dev->input;
26         int x, y;
27
28         if (gpio->bleft >= 0)
29                 input_report_key(input, BTN_LEFT,
30                                 gpio_get_value(gpio->bleft) ^ gpio->polarity);
31         if (gpio->bmiddle >= 0)
32                 input_report_key(input, BTN_MIDDLE,
33                                 gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
34         if (gpio->bright >= 0)
35                 input_report_key(input, BTN_RIGHT,
36                                 gpio_get_value(gpio->bright) ^ gpio->polarity);
37
38         x = (gpio_get_value(gpio->right) ^ gpio->polarity)
39                 - (gpio_get_value(gpio->left) ^ gpio->polarity);
40         y = (gpio_get_value(gpio->down) ^ gpio->polarity)
41                 - (gpio_get_value(gpio->up) ^ gpio->polarity);
42
43         input_report_rel(input, REL_X, x);
44         input_report_rel(input, REL_Y, y);
45         input_sync(input);
46 }
47
48 static int gpio_mouse_probe(struct platform_device *pdev)
49 {
50         struct gpio_mouse_platform_data *pdata = dev_get_platdata(&pdev->dev);
51         struct input_polled_dev *input_poll;
52         struct input_dev *input;
53         int pin, i;
54         int error;
55
56         if (!pdata) {
57                 dev_err(&pdev->dev, "no platform data\n");
58                 error = -ENXIO;
59                 goto out;
60         }
61
62         if (pdata->scan_ms < 0) {
63                 dev_err(&pdev->dev, "invalid scan time\n");
64                 error = -EINVAL;
65                 goto out;
66         }
67
68         for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
69                 pin = pdata->pins[i];
70
71                 if (pin < 0) {
72
73                         if (i <= GPIO_MOUSE_PIN_RIGHT) {
74                                 /* Mouse direction is required. */
75                                 dev_err(&pdev->dev,
76                                         "missing GPIO for directions\n");
77                                 error = -EINVAL;
78                                 goto out_free_gpios;
79                         }
80
81                         if (i == GPIO_MOUSE_PIN_BLEFT)
82                                 dev_dbg(&pdev->dev, "no left button defined\n");
83
84                 } else {
85                         error = gpio_request(pin, "gpio_mouse");
86                         if (error) {
87                                 dev_err(&pdev->dev, "fail %d pin (%d idx)\n",
88                                         pin, i);
89                                 goto out_free_gpios;
90                         }
91
92                         gpio_direction_input(pin);
93                 }
94         }
95
96         input_poll = input_allocate_polled_device();
97         if (!input_poll) {
98                 dev_err(&pdev->dev, "not enough memory for input device\n");
99                 error = -ENOMEM;
100                 goto out_free_gpios;
101         }
102
103         platform_set_drvdata(pdev, input_poll);
104
105         /* set input-polldev handlers */
106         input_poll->private = pdata;
107         input_poll->poll = gpio_mouse_scan;
108         input_poll->poll_interval = pdata->scan_ms;
109
110         input = input_poll->input;
111         input->name = pdev->name;
112         input->id.bustype = BUS_HOST;
113         input->dev.parent = &pdev->dev;
114
115         input_set_capability(input, EV_REL, REL_X);
116         input_set_capability(input, EV_REL, REL_Y);
117         if (pdata->bleft >= 0)
118                 input_set_capability(input, EV_KEY, BTN_LEFT);
119         if (pdata->bmiddle >= 0)
120                 input_set_capability(input, EV_KEY, BTN_MIDDLE);
121         if (pdata->bright >= 0)
122                 input_set_capability(input, EV_KEY, BTN_RIGHT);
123
124         error = input_register_polled_device(input_poll);
125         if (error) {
126                 dev_err(&pdev->dev, "could not register input device\n");
127                 goto out_free_polldev;
128         }
129
130         dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
131                         pdata->scan_ms,
132                         pdata->bleft < 0 ? "" : "left ",
133                         pdata->bmiddle < 0 ? "" : "middle ",
134                         pdata->bright < 0 ? "" : "right");
135
136         return 0;
137
138  out_free_polldev:
139         input_free_polled_device(input_poll);
140
141  out_free_gpios:
142         while (--i >= 0) {
143                 pin = pdata->pins[i];
144                 if (pin)
145                         gpio_free(pin);
146         }
147  out:
148         return error;
149 }
150
151 static int gpio_mouse_remove(struct platform_device *pdev)
152 {
153         struct input_polled_dev *input = platform_get_drvdata(pdev);
154         struct gpio_mouse_platform_data *pdata = input->private;
155         int pin, i;
156
157         input_unregister_polled_device(input);
158         input_free_polled_device(input);
159
160         for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
161                 pin = pdata->pins[i];
162                 if (pin >= 0)
163                         gpio_free(pin);
164         }
165
166         return 0;
167 }
168
169 static struct platform_driver gpio_mouse_device_driver = {
170         .probe          = gpio_mouse_probe,
171         .remove         = gpio_mouse_remove,
172         .driver         = {
173                 .name   = "gpio_mouse",
174         }
175 };
176 module_platform_driver(gpio_mouse_device_driver);
177
178 MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
179 MODULE_DESCRIPTION("GPIO mouse driver");
180 MODULE_LICENSE("GPL");
181 MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
182