Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / input / keyboard / max7359_keypad.c
1 /*
2  * max7359_keypad.c - MAX7359 Key Switch Controller Driver
3  *
4  * Copyright (C) 2009 Samsung Electronics
5  * Kim Kyuwon <q1.kim@samsung.com>
6  *
7  * Based on pxa27x_keypad.c
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  *
13  * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
14  */
15
16 #include <linux/module.h>
17 #include <linux/i2c.h>
18 #include <linux/slab.h>
19 #include <linux/interrupt.h>
20 #include <linux/pm.h>
21 #include <linux/input.h>
22 #include <linux/input/matrix_keypad.h>
23
24 #define MAX7359_MAX_KEY_ROWS    8
25 #define MAX7359_MAX_KEY_COLS    8
26 #define MAX7359_MAX_KEY_NUM     (MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS)
27 #define MAX7359_ROW_SHIFT       3
28
29 /*
30  * MAX7359 registers
31  */
32 #define MAX7359_REG_KEYFIFO     0x00
33 #define MAX7359_REG_CONFIG      0x01
34 #define MAX7359_REG_DEBOUNCE    0x02
35 #define MAX7359_REG_INTERRUPT   0x03
36 #define MAX7359_REG_PORTS       0x04
37 #define MAX7359_REG_KEYREP      0x05
38 #define MAX7359_REG_SLEEP       0x06
39
40 /*
41  * Configuration register bits
42  */
43 #define MAX7359_CFG_SLEEP       (1 << 7)
44 #define MAX7359_CFG_INTERRUPT   (1 << 5)
45 #define MAX7359_CFG_KEY_RELEASE (1 << 3)
46 #define MAX7359_CFG_WAKEUP      (1 << 1)
47 #define MAX7359_CFG_TIMEOUT     (1 << 0)
48
49 /*
50  * Autosleep register values (ms)
51  */
52 #define MAX7359_AUTOSLEEP_8192  0x01
53 #define MAX7359_AUTOSLEEP_4096  0x02
54 #define MAX7359_AUTOSLEEP_2048  0x03
55 #define MAX7359_AUTOSLEEP_1024  0x04
56 #define MAX7359_AUTOSLEEP_512   0x05
57 #define MAX7359_AUTOSLEEP_256   0x06
58
59 struct max7359_keypad {
60         /* matrix key code map */
61         unsigned short keycodes[MAX7359_MAX_KEY_NUM];
62
63         struct input_dev *input_dev;
64         struct i2c_client *client;
65 };
66
67 static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val)
68 {
69         int ret = i2c_smbus_write_byte_data(client, reg, val);
70
71         if (ret < 0)
72                 dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
73                         __func__, reg, val, ret);
74         return ret;
75 }
76
77 static int max7359_read_reg(struct i2c_client *client, int reg)
78 {
79         int ret = i2c_smbus_read_byte_data(client, reg);
80
81         if (ret < 0)
82                 dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
83                         __func__, reg, ret);
84         return ret;
85 }
86
87 static void max7359_build_keycode(struct max7359_keypad *keypad,
88                                 const struct matrix_keymap_data *keymap_data)
89 {
90         struct input_dev *input_dev = keypad->input_dev;
91         int i;
92
93         for (i = 0; i < keymap_data->keymap_size; i++) {
94                 unsigned int key = keymap_data->keymap[i];
95                 unsigned int row = KEY_ROW(key);
96                 unsigned int col = KEY_COL(key);
97                 unsigned int scancode = MATRIX_SCAN_CODE(row, col,
98                                                 MAX7359_ROW_SHIFT);
99                 unsigned short keycode = KEY_VAL(key);
100
101                 keypad->keycodes[scancode] = keycode;
102                 __set_bit(keycode, input_dev->keybit);
103         }
104         __clear_bit(KEY_RESERVED, input_dev->keybit);
105 }
106
107 /* runs in an IRQ thread -- can (and will!) sleep */
108 static irqreturn_t max7359_interrupt(int irq, void *dev_id)
109 {
110         struct max7359_keypad *keypad = dev_id;
111         struct input_dev *input_dev = keypad->input_dev;
112         int val, row, col, release, code;
113
114         val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO);
115         row = val & 0x7;
116         col = (val >> 3) & 0x7;
117         release = val & 0x40;
118
119         code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT);
120
121         dev_dbg(&keypad->client->dev,
122                 "key[%d:%d] %s\n", row, col, release ? "release" : "press");
123
124         input_event(input_dev, EV_MSC, MSC_SCAN, code);
125         input_report_key(input_dev, keypad->keycodes[code], !release);
126         input_sync(input_dev);
127
128         return IRQ_HANDLED;
129 }
130
131 /*
132  * Let MAX7359 fall into a deep sleep:
133  * If no keys are pressed, enter sleep mode for 8192 ms. And if any
134  * key is pressed, the MAX7359 returns to normal operating mode.
135  */
136 static inline void max7359_fall_deepsleep(struct i2c_client *client)
137 {
138         max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192);
139 }
140
141 /*
142  * Let MAX7359 take a catnap:
143  * Autosleep just for 256 ms.
144  */
145 static inline void max7359_take_catnap(struct i2c_client *client)
146 {
147         max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256);
148 }
149
150 static int max7359_open(struct input_dev *dev)
151 {
152         struct max7359_keypad *keypad = input_get_drvdata(dev);
153
154         max7359_take_catnap(keypad->client);
155
156         return 0;
157 }
158
159 static void max7359_close(struct input_dev *dev)
160 {
161         struct max7359_keypad *keypad = input_get_drvdata(dev);
162
163         max7359_fall_deepsleep(keypad->client);
164 }
165
166 static void max7359_initialize(struct i2c_client *client)
167 {
168         max7359_write_reg(client, MAX7359_REG_CONFIG,
169                 MAX7359_CFG_INTERRUPT | /* Irq clears after host read */
170                 MAX7359_CFG_KEY_RELEASE | /* Key release enable */
171                 MAX7359_CFG_WAKEUP); /* Key press wakeup enable */
172
173         /* Full key-scan functionality */
174         max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F);
175
176         /* nINT asserts every debounce cycles */
177         max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01);
178
179         max7359_fall_deepsleep(client);
180 }
181
182 static int max7359_probe(struct i2c_client *client,
183                                         const struct i2c_device_id *id)
184 {
185         const struct matrix_keymap_data *keymap_data =
186                         dev_get_platdata(&client->dev);
187         struct max7359_keypad *keypad;
188         struct input_dev *input_dev;
189         int ret;
190         int error;
191
192         if (!client->irq) {
193                 dev_err(&client->dev, "The irq number should not be zero\n");
194                 return -EINVAL;
195         }
196
197         /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */
198         ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO);
199         if (ret < 0) {
200                 dev_err(&client->dev, "failed to detect device\n");
201                 return -ENODEV;
202         }
203
204         dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret);
205
206         keypad = devm_kzalloc(&client->dev, sizeof(struct max7359_keypad),
207                               GFP_KERNEL);
208         if (!keypad) {
209                 dev_err(&client->dev, "failed to allocate memory\n");
210                 return -ENOMEM;
211         }
212
213         input_dev = devm_input_allocate_device(&client->dev);
214         if (!input_dev) {
215                 dev_err(&client->dev, "failed to allocate input device\n");
216                 return -ENOMEM;
217         }
218
219         keypad->client = client;
220         keypad->input_dev = input_dev;
221
222         input_dev->name = client->name;
223         input_dev->id.bustype = BUS_I2C;
224         input_dev->open = max7359_open;
225         input_dev->close = max7359_close;
226         input_dev->dev.parent = &client->dev;
227
228         input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
229         input_dev->keycodesize = sizeof(keypad->keycodes[0]);
230         input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
231         input_dev->keycode = keypad->keycodes;
232
233         input_set_capability(input_dev, EV_MSC, MSC_SCAN);
234         input_set_drvdata(input_dev, keypad);
235
236         max7359_build_keycode(keypad, keymap_data);
237
238         error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
239                                           max7359_interrupt,
240                                           IRQF_TRIGGER_LOW | IRQF_ONESHOT,
241                                           client->name, keypad);
242         if (error) {
243                 dev_err(&client->dev, "failed to register interrupt\n");
244                 return error;
245         }
246
247         /* Register the input device */
248         error = input_register_device(input_dev);
249         if (error) {
250                 dev_err(&client->dev, "failed to register input device\n");
251                 return error;
252         }
253
254         /* Initialize MAX7359 */
255         max7359_initialize(client);
256
257         i2c_set_clientdata(client, keypad);
258         device_init_wakeup(&client->dev, 1);
259
260         return 0;
261 }
262
263 #ifdef CONFIG_PM_SLEEP
264 static int max7359_suspend(struct device *dev)
265 {
266         struct i2c_client *client = to_i2c_client(dev);
267
268         max7359_fall_deepsleep(client);
269
270         if (device_may_wakeup(&client->dev))
271                 enable_irq_wake(client->irq);
272
273         return 0;
274 }
275
276 static int max7359_resume(struct device *dev)
277 {
278         struct i2c_client *client = to_i2c_client(dev);
279
280         if (device_may_wakeup(&client->dev))
281                 disable_irq_wake(client->irq);
282
283         /* Restore the default setting */
284         max7359_take_catnap(client);
285
286         return 0;
287 }
288 #endif
289
290 static SIMPLE_DEV_PM_OPS(max7359_pm, max7359_suspend, max7359_resume);
291
292 static const struct i2c_device_id max7359_ids[] = {
293         { "max7359", 0 },
294         { }
295 };
296 MODULE_DEVICE_TABLE(i2c, max7359_ids);
297
298 static struct i2c_driver max7359_i2c_driver = {
299         .driver = {
300                 .name = "max7359",
301                 .pm   = &max7359_pm,
302         },
303         .probe          = max7359_probe,
304         .id_table       = max7359_ids,
305 };
306
307 module_i2c_driver(max7359_i2c_driver);
308
309 MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
310 MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver");
311 MODULE_LICENSE("GPL v2");