Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / infiniband / hw / qib / qib_qsfp.h
1 /*
2  * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
3  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
4  *
5  * This software is available to you under a choice of one of two
6  * licenses.  You may choose to be licensed under the terms of the GNU
7  * General Public License (GPL) Version 2, available from the file
8  * COPYING in the main directory of this source tree, or the
9  * OpenIB.org BSD license below:
10  *
11  *     Redistribution and use in source and binary forms, with or
12  *     without modification, are permitted provided that the following
13  *     conditions are met:
14  *
15  *      - Redistributions of source code must retain the above
16  *        copyright notice, this list of conditions and the following
17  *        disclaimer.
18  *
19  *      - Redistributions in binary form must reproduce the above
20  *        copyright notice, this list of conditions and the following
21  *        disclaimer in the documentation and/or other materials
22  *        provided with the distribution.
23  *
24  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31  * SOFTWARE.
32  */
33 /* QSFP support common definitions, for ib_qib driver */
34
35 #define QSFP_DEV 0xA0
36 #define QSFP_PWR_LAG_MSEC 2000
37 #define QSFP_MODPRS_LAG_MSEC 20
38
39 /*
40  * Below are masks for various QSFP signals, for Port 1.
41  * Port2 equivalents are shifted by QSFP_GPIO_PORT2_SHIFT.
42  * _N means asserted low
43  */
44 #define QSFP_GPIO_MOD_SEL_N (4)
45 #define QSFP_GPIO_MOD_PRS_N (8)
46 #define QSFP_GPIO_INT_N (0x10)
47 #define QSFP_GPIO_MOD_RST_N (0x20)
48 #define QSFP_GPIO_LP_MODE (0x40)
49 #define QSFP_GPIO_PORT2_SHIFT 5
50
51 #define QSFP_PAGESIZE 128
52 /* Defined fields that QLogic requires of qualified cables */
53 /* Byte 0 is Identifier, not checked */
54 /* Byte 1 is reserved "status MSB" */
55 /* Byte 2 is "status LSB" We only care that D2 "Flat Mem" is set. */
56 /*
57  * Rest of first 128 not used, although 127 is reserved for page select
58  * if module is not "Flat memory".
59  */
60 /* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */
61 #define QSFP_MOD_ID_OFFS 128
62 /*
63  * Byte 129 is "Extended Identifier". We only care about D7,D6: Power class
64  *  0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W
65  */
66 #define QSFP_MOD_PWR_OFFS 129
67 /* Byte 130 is Connector type. Not QLogic req'd */
68 /* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */
69 /* Byte 139 is encoding. code 0x01 is 8b10b. Not QLogic req'd */
70 /* byte 140 is nominal bit-rate, in units of 100Mbits/sec Not QLogic req'd */
71 /* Byte 141 is Extended Rate Select. Not QLogic req'd */
72 /* Bytes 142..145 are lengths for various fiber types. Not QLogic req'd */
73 /* Byte 146 is length for Copper. Units of 1 meter */
74 #define QSFP_MOD_LEN_OFFS 146
75 /*
76  * Byte 147 is Device technology. D0..3 not Qlogc req'd
77  * D4..7 select from 15 choices, translated by table:
78  */
79 #define QSFP_MOD_TECH_OFFS 147
80 extern const char *const qib_qsfp_devtech[16];
81 /* Active Equalization includes fiber, copper full EQ, and copper near Eq */
82 #define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1)
83 /* Active Equalization includes fiber, copper full EQ, and copper far Eq */
84 #define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1)
85 /* Attenuation should be valid for copper other than full/near Eq */
86 #define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1)
87 /* Length is only valid if technology is "copper" */
88 #define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1)
89 #define QSFP_TECH_1490 9
90
91 #define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \
92                         oui[2])
93 #define QSFP_OUI_AMPHENOL 0x415048
94 #define QSFP_OUI_FINISAR  0x009065
95 #define QSFP_OUI_GORE     0x002177
96
97 /* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */
98 #define QSFP_VEND_OFFS 148
99 #define QSFP_VEND_LEN 16
100 /* Byte 164 is IB Extended tranceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */
101 #define QSFP_IBXCV_OFFS 164
102 /* Bytes 165..167 are Vendor OUI number */
103 #define QSFP_VOUI_OFFS 165
104 #define QSFP_VOUI_LEN 3
105 /* Bytes 168..183 are Vendor Part Number, string */
106 #define QSFP_PN_OFFS 168
107 #define QSFP_PN_LEN 16
108 /* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */
109 #define QSFP_REV_OFFS 184
110 #define QSFP_REV_LEN 2
111 /*
112  * Bytes 186,187 are Wavelength, if Optical. Not Qlogic req'd
113  *  If copper, they are attenuation in dB:
114  * Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR)
115  */
116 #define QSFP_ATTEN_OFFS 186
117 #define QSFP_ATTEN_LEN 2
118 /* Bytes 188,189 are Wavelength tolerance, not QLogic req'd */
119 /* Byte 190 is Max Case Temp. Not QLogic req'd */
120 /* Byte 191 is LSB of sum of bytes 128..190. Not QLogic req'd */
121 #define QSFP_CC_OFFS 191
122 /* Bytes 192..195 are Options implemented in qsfp. Not Qlogic req'd */
123 /* Bytes 196..211 are Serial Number, String */
124 #define QSFP_SN_OFFS 196
125 #define QSFP_SN_LEN 16
126 /* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */
127 #define QSFP_DATE_OFFS 212
128 #define QSFP_DATE_LEN 6
129 /* Bytes 218,219 are optional lot-code, string */
130 #define QSFP_LOT_OFFS 218
131 #define QSFP_LOT_LEN 2
132 /* Bytes 220, 221 indicate monitoring options, Not QLogic req'd */
133 /* Byte 223 is LSB of sum of bytes 192..222 */
134 #define QSFP_CC_EXT_OFFS 223
135
136 /*
137  * struct qib_qsfp_data encapsulates state of QSFP device for one port.
138  * it will be part of port-chip-specific data if a board supports QSFP.
139  *
140  * Since multiple board-types use QSFP, and their pport_data structs
141  * differ (in the chip-specific section), we need a pointer to its head.
142  *
143  * Avoiding premature optimization, we will have one work_struct per port,
144  * and let the (increasingly inaccurately named) eep_lock arbitrate
145  * access to common resources.
146  *
147  */
148
149 /*
150  * Hold the parts of the onboard EEPROM that we care about, so we aren't
151  * coonstantly bit-boffing
152  */
153 struct qib_qsfp_cache {
154         u8 id;  /* must be 0x0C or 0x0D; 0 indicates invalid EEPROM read */
155         u8 pwr; /* in D6,7 */
156         u8 len; /* in meters, Cu only */
157         u8 tech;
158         char vendor[QSFP_VEND_LEN];
159         u8 xt_xcv; /* Ext. tranceiver codes, 4 lsbs are IB speed supported */
160         u8 oui[QSFP_VOUI_LEN];
161         u8 partnum[QSFP_PN_LEN];
162         u8 rev[QSFP_REV_LEN];
163         u8 atten[QSFP_ATTEN_LEN];
164         u8 cks1;        /* Checksum of bytes 128..190 */
165         u8 serial[QSFP_SN_LEN];
166         u8 date[QSFP_DATE_LEN];
167         u8 lot[QSFP_LOT_LEN];
168         u8 cks2;        /* Checsum of bytes 192..222 */
169 };
170
171 #define QSFP_PWR(pbyte) (((pbyte) >> 6) & 3)
172 #define QSFP_ATTEN_SDR(attenarray) (attenarray[0])
173 #define QSFP_ATTEN_DDR(attenarray) (attenarray[1])
174
175 struct qib_qsfp_data {
176         /* Helps to find our way */
177         struct qib_pportdata *ppd;
178         struct work_struct work;
179         struct qib_qsfp_cache cache;
180         unsigned long t_insert;
181         u8 modpresent;
182 };
183
184 extern int qib_refresh_qsfp_cache(struct qib_pportdata *ppd,
185                                   struct qib_qsfp_cache *cp);
186 extern int qib_qsfp_mod_present(struct qib_pportdata *ppd);
187 extern void qib_qsfp_init(struct qib_qsfp_data *qd,
188                           void (*fevent)(struct work_struct *));
189 extern void qib_qsfp_deinit(struct qib_qsfp_data *qd);