kernel/drivers/iio/adc/exynos_adc.c

   1 /*
   2  *  exynos_adc.c - Support for ADC in EXYNOS SoCs
   3  *
   4  *  8 ~ 10 channel, 10/12-bit ADC
   5  *
   6  *  Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com>
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License as published by
  10  *  the Free Software Foundation; either version 2 of the License, or
  11  *  (at your option) any later version.
  12  *
  13  *  This program is distributed in the hope that it will be useful,
  14  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  *  GNU General Public License for more details.
  17  *
  18  *  You should have received a copy of the GNU General Public License
  19  *  along with this program; if not, write to the Free Software
  20  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/delay.h>
  27 #include <linux/errno.h>
  28 #include <linux/kernel.h>
  29 #include <linux/slab.h>
  30 #include <linux/io.h>
  31 #include <linux/clk.h>
  32 #include <linux/completion.h>
  33 #include <linux/of.h>
  34 #include <linux/of_irq.h>
  35 #include <linux/regulator/consumer.h>
  36 #include <linux/of_platform.h>
  37 #include <linux/err.h>
  38
  39 #include <linux/iio/iio.h>
  40 #include <linux/iio/machine.h>
  41 #include <linux/iio/driver.h>
  42 #include <linux/mfd/syscon.h>
  43 #include <linux/regmap.h>
  44
  45 /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
  46 #define ADC_V1_CON(x)           ((x) + 0x00)
  47 #define ADC_V1_DLY(x)           ((x) + 0x08)
  48 #define ADC_V1_DATX(x)          ((x) + 0x0C)
  49 #define ADC_V1_INTCLR(x)        ((x) + 0x18)
  50 #define ADC_V1_MUX(x)           ((x) + 0x1c)
  51
  52 /* S3C2410 ADC registers definitions */
  53 #define ADC_S3C2410_MUX(x)      ((x) + 0x18)
  54
  55 /* Future ADC_V2 registers definitions */
  56 #define ADC_V2_CON1(x)          ((x) + 0x00)
  57 #define ADC_V2_CON2(x)          ((x) + 0x04)
  58 #define ADC_V2_STAT(x)          ((x) + 0x08)
  59 #define ADC_V2_INT_EN(x)        ((x) + 0x10)
  60 #define ADC_V2_INT_ST(x)        ((x) + 0x14)
  61 #define ADC_V2_VER(x)           ((x) + 0x20)
  62
  63 /* Bit definitions for ADC_V1 */
  64 #define ADC_V1_CON_RES          (1u << 16)
  65 #define ADC_V1_CON_PRSCEN       (1u << 14)
  66 #define ADC_V1_CON_PRSCLV(x)    (((x) & 0xFF) << 6)
  67 #define ADC_V1_CON_STANDBY      (1u << 2)
  68
  69 /* Bit definitions for S3C2410 ADC */
  70 #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3)
  71 #define ADC_S3C2410_DATX_MASK   0x3FF
  72 #define ADC_S3C2416_CON_RES_SEL (1u << 3)
  73
  74 /* Bit definitions for ADC_V2 */
  75 #define ADC_V2_CON1_SOFT_RESET  (1u << 2)
  76
  77 #define ADC_V2_CON2_OSEL        (1u << 10)
  78 #define ADC_V2_CON2_ESEL        (1u << 9)
  79 #define ADC_V2_CON2_HIGHF       (1u << 8)
  80 #define ADC_V2_CON2_C_TIME(x)   (((x) & 7) << 4)
  81 #define ADC_V2_CON2_ACH_SEL(x)  (((x) & 0xF) << 0)
  82 #define ADC_V2_CON2_ACH_MASK    0xF
  83
  84 #define MAX_ADC_V2_CHANNELS             10
  85 #define MAX_ADC_V1_CHANNELS             8
  86 #define MAX_EXYNOS3250_ADC_CHANNELS     2
  87
  88 /* Bit definitions common for ADC_V1 and ADC_V2 */
  89 #define ADC_CON_EN_START        (1u << 0)
  90 #define ADC_CON_EN_START_MASK   (0x3 << 0)
  91 #define ADC_DATX_MASK           0xFFF
  92
  93 #define EXYNOS_ADC_TIMEOUT      (msecs_to_jiffies(100))
  94
  95 #define EXYNOS_ADCV1_PHY_OFFSET 0x0718
  96 #define EXYNOS_ADCV2_PHY_OFFSET 0x0720
  97
  98 struct exynos_adc {
  99         struct exynos_adc_data  *data;
 100         struct device           *dev;
 101         void __iomem            *regs;
 102         struct regmap           *pmu_map;
 103         struct clk              *clk;
 104         struct clk              *sclk;
 105         unsigned int            irq;
 106         struct regulator        *vdd;
 107
 108         struct completion       completion;
 109
 110         u32                     value;
 111         unsigned int            version;
 112 };
 113
 114 struct exynos_adc_data {
 115         int num_channels;
 116         bool needs_sclk;
 117         bool needs_adc_phy;
 118         int phy_offset;
 119         u32 mask;
 120
 121         void (*init_hw)(struct exynos_adc *info);
 122         void (*exit_hw)(struct exynos_adc *info);
 123         void (*clear_irq)(struct exynos_adc *info);
 124         void (*start_conv)(struct exynos_adc *info, unsigned long addr);
 125 };
 126
 127 static void exynos_adc_unprepare_clk(struct exynos_adc *info)
 128 {
 129         if (info->data->needs_sclk)
 130                 clk_unprepare(info->sclk);
 131         clk_unprepare(info->clk);
 132 }
 133
 134 static int exynos_adc_prepare_clk(struct exynos_adc *info)
 135 {
 136         int ret;
 137
 138         ret = clk_prepare(info->clk);
 139         if (ret) {
 140                 dev_err(info->dev, "failed preparing adc clock: %d\n", ret);
 141                 return ret;
 142         }
 143
 144         if (info->data->needs_sclk) {
 145                 ret = clk_prepare(info->sclk);
 146                 if (ret) {
 147                         clk_unprepare(info->clk);
 148                         dev_err(info->dev,
 149                                 "failed preparing sclk_adc clock: %d\n", ret);
 150                         return ret;
 151                 }
 152         }
 153
 154         return 0;
 155 }
 156
 157 static void exynos_adc_disable_clk(struct exynos_adc *info)
 158 {
 159         if (info->data->needs_sclk)
 160                 clk_disable(info->sclk);
 161         clk_disable(info->clk);
 162 }
 163
 164 static int exynos_adc_enable_clk(struct exynos_adc *info)
 165 {
 166         int ret;
 167
 168         ret = clk_enable(info->clk);
 169         if (ret) {
 170                 dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
 171                 return ret;
 172         }
 173
 174         if (info->data->needs_sclk) {
 175                 ret = clk_enable(info->sclk);
 176                 if (ret) {
 177                         clk_disable(info->clk);
 178                         dev_err(info->dev,
 179                                 "failed enabling sclk_adc clock: %d\n", ret);
 180                         return ret;
 181                 }
 182         }
 183
 184         return 0;
 185 }
 186
 187 static void exynos_adc_v1_init_hw(struct exynos_adc *info)
 188 {
 189         u32 con1;
 190
 191         if (info->data->needs_adc_phy)
 192                 regmap_write(info->pmu_map, info->data->phy_offset, 1);
 193
 194         /* set default prescaler values and Enable prescaler */
 195         con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
 196
 197         /* Enable 12-bit ADC resolution */
 198         con1 |= ADC_V1_CON_RES;
 199         writel(con1, ADC_V1_CON(info->regs));
 200 }
 201
 202 static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
 203 {
 204         u32 con;
 205
 206         if (info->data->needs_adc_phy)
 207                 regmap_write(info->pmu_map, info->data->phy_offset, 0);
 208
 209         con = readl(ADC_V1_CON(info->regs));
 210         con |= ADC_V1_CON_STANDBY;
 211         writel(con, ADC_V1_CON(info->regs));
 212 }
 213
 214 static void exynos_adc_v1_clear_irq(struct exynos_adc *info)
 215 {
 216         writel(1, ADC_V1_INTCLR(info->regs));
 217 }
 218
 219 static void exynos_adc_v1_start_conv(struct exynos_adc *info,
 220                                      unsigned long addr)
 221 {
 222         u32 con1;
 223
 224         writel(addr, ADC_V1_MUX(info->regs));
 225
 226         con1 = readl(ADC_V1_CON(info->regs));
 227         writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
 228 }
 229
 230 static const struct exynos_adc_data exynos_adc_v1_data = {
 231         .num_channels   = MAX_ADC_V1_CHANNELS,
 232         .mask           = ADC_DATX_MASK,        /* 12 bit ADC resolution */
 233         .needs_adc_phy  = true,
 234         .phy_offset     = EXYNOS_ADCV1_PHY_OFFSET,
 235
 236         .init_hw        = exynos_adc_v1_init_hw,
 237         .exit_hw        = exynos_adc_v1_exit_hw,
 238         .clear_irq      = exynos_adc_v1_clear_irq,
 239         .start_conv     = exynos_adc_v1_start_conv,
 240 };
 241
 242 static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
 243                                           unsigned long addr)
 244 {
 245         u32 con1;
 246
 247         /* Enable 12 bit ADC resolution */
 248         con1 = readl(ADC_V1_CON(info->regs));
 249         con1 |= ADC_S3C2416_CON_RES_SEL;
 250         writel(con1, ADC_V1_CON(info->regs));
 251
 252         /* Select channel for S3C2416 */
 253         writel(addr, ADC_S3C2410_MUX(info->regs));
 254
 255         con1 = readl(ADC_V1_CON(info->regs));
 256         writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
 257 }
 258
 259 static struct exynos_adc_data const exynos_adc_s3c2416_data = {
 260         .num_channels   = MAX_ADC_V1_CHANNELS,
 261         .mask           = ADC_DATX_MASK,        /* 12 bit ADC resolution */
 262
 263         .init_hw        = exynos_adc_v1_init_hw,
 264         .exit_hw        = exynos_adc_v1_exit_hw,
 265         .start_conv     = exynos_adc_s3c2416_start_conv,
 266 };
 267
 268 static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info,
 269                                           unsigned long addr)
 270 {
 271         u32 con1;
 272
 273         /* Select channel for S3C2433 */
 274         writel(addr, ADC_S3C2410_MUX(info->regs));
 275
 276         con1 = readl(ADC_V1_CON(info->regs));
 277         writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
 278 }
 279
 280 static struct exynos_adc_data const exynos_adc_s3c2443_data = {
 281         .num_channels   = MAX_ADC_V1_CHANNELS,
 282         .mask           = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
 283
 284         .init_hw        = exynos_adc_v1_init_hw,
 285         .exit_hw        = exynos_adc_v1_exit_hw,
 286         .start_conv     = exynos_adc_s3c2443_start_conv,
 287 };
 288
 289 static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
 290                                           unsigned long addr)
 291 {
 292         u32 con1;
 293
 294         con1 = readl(ADC_V1_CON(info->regs));
 295         con1 &= ~ADC_S3C2410_CON_SELMUX(0x7);
 296         con1 |= ADC_S3C2410_CON_SELMUX(addr);
 297         writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
 298 }
 299
 300 static struct exynos_adc_data const exynos_adc_s3c24xx_data = {
 301         .num_channels   = MAX_ADC_V1_CHANNELS,
 302         .mask           = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
 303
 304         .init_hw        = exynos_adc_v1_init_hw,
 305         .exit_hw        = exynos_adc_v1_exit_hw,
 306         .start_conv     = exynos_adc_s3c64xx_start_conv,
 307 };
 308
 309 static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
 310         .num_channels   = MAX_ADC_V1_CHANNELS,
 311         .mask           = ADC_DATX_MASK,        /* 12 bit ADC resolution */
 312
 313         .init_hw        = exynos_adc_v1_init_hw,
 314         .exit_hw        = exynos_adc_v1_exit_hw,
 315         .clear_irq      = exynos_adc_v1_clear_irq,
 316         .start_conv     = exynos_adc_s3c64xx_start_conv,
 317 };
 318
 319 static void exynos_adc_v2_init_hw(struct exynos_adc *info)
 320 {
 321         u32 con1, con2;
 322
 323         if (info->data->needs_adc_phy)
 324                 regmap_write(info->pmu_map, info->data->phy_offset, 1);
 325
 326         con1 = ADC_V2_CON1_SOFT_RESET;
 327         writel(con1, ADC_V2_CON1(info->regs));
 328
 329         con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
 330                 ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
 331         writel(con2, ADC_V2_CON2(info->regs));
 332
 333         /* Enable interrupts */
 334         writel(1, ADC_V2_INT_EN(info->regs));
 335 }
 336
 337 static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
 338 {
 339         u32 con;
 340
 341         if (info->data->needs_adc_phy)
 342                 regmap_write(info->pmu_map, info->data->phy_offset, 0);
 343
 344         con = readl(ADC_V2_CON1(info->regs));
 345         con &= ~ADC_CON_EN_START;
 346         writel(con, ADC_V2_CON1(info->regs));
 347 }
 348
 349 static void exynos_adc_v2_clear_irq(struct exynos_adc *info)
 350 {
 351         writel(1, ADC_V2_INT_ST(info->regs));
 352 }
 353
 354 static void exynos_adc_v2_start_conv(struct exynos_adc *info,
 355                                      unsigned long addr)
 356 {
 357         u32 con1, con2;
 358
 359         con2 = readl(ADC_V2_CON2(info->regs));
 360         con2 &= ~ADC_V2_CON2_ACH_MASK;
 361         con2 |= ADC_V2_CON2_ACH_SEL(addr);
 362         writel(con2, ADC_V2_CON2(info->regs));
 363
 364         con1 = readl(ADC_V2_CON1(info->regs));
 365         writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs));
 366 }
 367
 368 static const struct exynos_adc_data exynos_adc_v2_data = {
 369         .num_channels   = MAX_ADC_V2_CHANNELS,
 370         .mask           = ADC_DATX_MASK, /* 12 bit ADC resolution */
 371         .needs_adc_phy  = true,
 372         .phy_offset     = EXYNOS_ADCV2_PHY_OFFSET,
 373
 374         .init_hw        = exynos_adc_v2_init_hw,
 375         .exit_hw        = exynos_adc_v2_exit_hw,
 376         .clear_irq      = exynos_adc_v2_clear_irq,
 377         .start_conv     = exynos_adc_v2_start_conv,
 378 };
 379
 380 static const struct exynos_adc_data exynos3250_adc_data = {
 381         .num_channels   = MAX_EXYNOS3250_ADC_CHANNELS,
 382         .mask           = ADC_DATX_MASK, /* 12 bit ADC resolution */
 383         .needs_sclk     = true,
 384         .needs_adc_phy  = true,
 385         .phy_offset     = EXYNOS_ADCV1_PHY_OFFSET,
 386
 387         .init_hw        = exynos_adc_v2_init_hw,
 388         .exit_hw        = exynos_adc_v2_exit_hw,
 389         .clear_irq      = exynos_adc_v2_clear_irq,
 390         .start_conv     = exynos_adc_v2_start_conv,
 391 };
 392
 393 static void exynos_adc_exynos7_init_hw(struct exynos_adc *info)
 394 {
 395         u32 con1, con2;
 396
 397         if (info->data->needs_adc_phy)
 398                 regmap_write(info->pmu_map, info->data->phy_offset, 1);
 399
 400         con1 = ADC_V2_CON1_SOFT_RESET;
 401         writel(con1, ADC_V2_CON1(info->regs));
 402
 403         con2 = readl(ADC_V2_CON2(info->regs));
 404         con2 &= ~ADC_V2_CON2_C_TIME(7);
 405         con2 |= ADC_V2_CON2_C_TIME(0);
 406         writel(con2, ADC_V2_CON2(info->regs));
 407
 408         /* Enable interrupts */
 409         writel(1, ADC_V2_INT_EN(info->regs));
 410 }
 411
 412 static const struct exynos_adc_data exynos7_adc_data = {
 413         .num_channels   = MAX_ADC_V1_CHANNELS,
 414         .mask           = ADC_DATX_MASK, /* 12 bit ADC resolution */
 415
 416         .init_hw        = exynos_adc_exynos7_init_hw,
 417         .exit_hw        = exynos_adc_v2_exit_hw,
 418         .clear_irq      = exynos_adc_v2_clear_irq,
 419         .start_conv     = exynos_adc_v2_start_conv,
 420 };
 421
 422 static const struct of_device_id exynos_adc_match[] = {
 423         {
 424                 .compatible = "samsung,s3c2410-adc",
 425                 .data = &exynos_adc_s3c24xx_data,
 426         }, {
 427                 .compatible = "samsung,s3c2416-adc",
 428                 .data = &exynos_adc_s3c2416_data,
 429         }, {
 430                 .compatible = "samsung,s3c2440-adc",
 431                 .data = &exynos_adc_s3c24xx_data,
 432         }, {
 433                 .compatible = "samsung,s3c2443-adc",
 434                 .data = &exynos_adc_s3c2443_data,
 435         }, {
 436                 .compatible = "samsung,s3c6410-adc",
 437                 .data = &exynos_adc_s3c64xx_data,
 438         }, {
 439                 .compatible = "samsung,exynos-adc-v1",
 440                 .data = &exynos_adc_v1_data,
 441         }, {
 442                 .compatible = "samsung,exynos-adc-v2",
 443                 .data = &exynos_adc_v2_data,
 444         }, {
 445                 .compatible = "samsung,exynos3250-adc",
 446                 .data = &exynos3250_adc_data,
 447         }, {
 448                 .compatible = "samsung,exynos7-adc",
 449                 .data = &exynos7_adc_data,
 450         },
 451         {},
 452 };
 453 MODULE_DEVICE_TABLE(of, exynos_adc_match);
 454
 455 static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev)
 456 {
 457         const struct of_device_id *match;
 458
 459         match = of_match_node(exynos_adc_match, pdev->dev.of_node);
 460         return (struct exynos_adc_data *)match->data;
 461 }
 462
 463 static int exynos_read_raw(struct iio_dev *indio_dev,
 464                                 struct iio_chan_spec const *chan,
 465                                 int *val,
 466                                 int *val2,
 467                                 long mask)
 468 {
 469         struct exynos_adc *info = iio_priv(indio_dev);
 470         unsigned long timeout;
 471         int ret;
 472
 473         if (mask != IIO_CHAN_INFO_RAW)
 474                 return -EINVAL;
 475
 476         mutex_lock(&indio_dev->mlock);
 477         reinit_completion(&info->completion);
 478
 479         /* Select the channel to be used and Trigger conversion */
 480         if (info->data->start_conv)
 481                 info->data->start_conv(info, chan->address);
 482
 483         timeout = wait_for_completion_timeout
 484                         (&info->completion, EXYNOS_ADC_TIMEOUT);
 485         if (timeout == 0) {
 486                 dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
 487                 if (info->data->init_hw)
 488                         info->data->init_hw(info);
 489                 ret = -ETIMEDOUT;
 490         } else {
 491                 *val = info->value;
 492                 *val2 = 0;
 493                 ret = IIO_VAL_INT;
 494         }
 495
 496         mutex_unlock(&indio_dev->mlock);
 497
 498         return ret;
 499 }
 500
 501 static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
 502 {
 503         struct exynos_adc *info = (struct exynos_adc *)dev_id;
 504         u32 mask = info->data->mask;
 505
 506         /* Read value */
 507         info->value = readl(ADC_V1_DATX(info->regs)) & mask;
 508
 509         /* clear irq */
 510         if (info->data->clear_irq)
 511                 info->data->clear_irq(info);
 512
 513         complete(&info->completion);
 514
 515         return IRQ_HANDLED;
 516 }
 517
 518 static int exynos_adc_reg_access(struct iio_dev *indio_dev,
 519                               unsigned reg, unsigned writeval,
 520                               unsigned *readval)
 521 {
 522         struct exynos_adc *info = iio_priv(indio_dev);
 523
 524         if (readval == NULL)
 525                 return -EINVAL;
 526
 527         *readval = readl(info->regs + reg);
 528
 529         return 0;
 530 }
 531
 532 static const struct iio_info exynos_adc_iio_info = {
 533         .read_raw = &exynos_read_raw,
 534         .debugfs_reg_access = &exynos_adc_reg_access,
 535         .driver_module = THIS_MODULE,
 536 };
 537
 538 #define ADC_CHANNEL(_index, _id) {                      \
 539         .type = IIO_VOLTAGE,                            \
 540         .indexed = 1,                                   \
 541         .channel = _index,                              \
 542         .address = _index,                              \
 543         .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),   \
 544         .datasheet_name = _id,                          \
 545 }
 546
 547 static const struct iio_chan_spec exynos_adc_iio_channels[] = {
 548         ADC_CHANNEL(0, "adc0"),
 549         ADC_CHANNEL(1, "adc1"),
 550         ADC_CHANNEL(2, "adc2"),
 551         ADC_CHANNEL(3, "adc3"),
 552         ADC_CHANNEL(4, "adc4"),
 553         ADC_CHANNEL(5, "adc5"),
 554         ADC_CHANNEL(6, "adc6"),
 555         ADC_CHANNEL(7, "adc7"),
 556         ADC_CHANNEL(8, "adc8"),
 557         ADC_CHANNEL(9, "adc9"),
 558 };
 559
 560 static int exynos_adc_remove_devices(struct device *dev, void *c)
 561 {
 562         struct platform_device *pdev = to_platform_device(dev);
 563
 564         platform_device_unregister(pdev);
 565
 566         return 0;
 567 }
 568
 569 static int exynos_adc_probe(struct platform_device *pdev)
 570 {
 571         struct exynos_adc *info = NULL;
 572         struct device_node *np = pdev->dev.of_node;
 573         struct iio_dev *indio_dev = NULL;
 574         struct resource *mem;
 575         int ret = -ENODEV;
 576         int irq;
 577
 578         if (!np)
 579                 return ret;
 580
 581         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
 582         if (!indio_dev) {
 583                 dev_err(&pdev->dev, "failed allocating iio device\n");
 584                 return -ENOMEM;
 585         }
 586
 587         info = iio_priv(indio_dev);
 588
 589         info->data = exynos_adc_get_data(pdev);
 590         if (!info->data) {
 591                 dev_err(&pdev->dev, "failed getting exynos_adc_data\n");
 592                 return -EINVAL;
 593         }
 594
 595         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 596         info->regs = devm_ioremap_resource(&pdev->dev, mem);
 597         if (IS_ERR(info->regs))
 598                 return PTR_ERR(info->regs);
 599
 600
 601         if (info->data->needs_adc_phy) {
 602                 info->pmu_map = syscon_regmap_lookup_by_phandle(
 603                                         pdev->dev.of_node,
 604                                         "samsung,syscon-phandle");
 605                 if (IS_ERR(info->pmu_map)) {
 606                         dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
 607                         return PTR_ERR(info->pmu_map);
 608                 }
 609         }
 610
 611         irq = platform_get_irq(pdev, 0);
 612         if (irq < 0) {
 613                 dev_err(&pdev->dev, "no irq resource?\n");
 614                 return irq;
 615         }
 616
 617         info->irq = irq;
 618         info->dev = &pdev->dev;
 619
 620         init_completion(&info->completion);
 621
 622         info->clk = devm_clk_get(&pdev->dev, "adc");
 623         if (IS_ERR(info->clk)) {
 624                 dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
 625                                                         PTR_ERR(info->clk));
 626                 return PTR_ERR(info->clk);
 627         }
 628
 629         if (info->data->needs_sclk) {
 630                 info->sclk = devm_clk_get(&pdev->dev, "sclk");
 631                 if (IS_ERR(info->sclk)) {
 632                         dev_err(&pdev->dev,
 633                                 "failed getting sclk clock, err = %ld\n",
 634                                 PTR_ERR(info->sclk));
 635                         return PTR_ERR(info->sclk);
 636                 }
 637         }
 638
 639         info->vdd = devm_regulator_get(&pdev->dev, "vdd");
 640         if (IS_ERR(info->vdd)) {
 641                 dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
 642                                                         PTR_ERR(info->vdd));
 643                 return PTR_ERR(info->vdd);
 644         }
 645
 646         ret = regulator_enable(info->vdd);
 647         if (ret)
 648                 return ret;
 649
 650         ret = exynos_adc_prepare_clk(info);
 651         if (ret)
 652                 goto err_disable_reg;
 653
 654         ret = exynos_adc_enable_clk(info);
 655         if (ret)
 656                 goto err_unprepare_clk;
 657
 658         platform_set_drvdata(pdev, indio_dev);
 659
 660         indio_dev->name = dev_name(&pdev->dev);
 661         indio_dev->dev.parent = &pdev->dev;
 662         indio_dev->dev.of_node = pdev->dev.of_node;
 663         indio_dev->info = &exynos_adc_iio_info;
 664         indio_dev->modes = INDIO_DIRECT_MODE;
 665         indio_dev->channels = exynos_adc_iio_channels;
 666         indio_dev->num_channels = info->data->num_channels;
 667
 668         ret = request_irq(info->irq, exynos_adc_isr,
 669                                         0, dev_name(&pdev->dev), info);
 670         if (ret < 0) {
 671                 dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
 672                                                         info->irq);
 673                 goto err_disable_clk;
 674         }
 675
 676         ret = iio_device_register(indio_dev);
 677         if (ret)
 678                 goto err_irq;
 679
 680         if (info->data->init_hw)
 681                 info->data->init_hw(info);
 682
 683         ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
 684         if (ret < 0) {
 685                 dev_err(&pdev->dev, "failed adding child nodes\n");
 686                 goto err_of_populate;
 687         }
 688
 689         return 0;
 690
 691 err_of_populate:
 692         device_for_each_child(&indio_dev->dev, NULL,
 693                                 exynos_adc_remove_devices);
 694         iio_device_unregister(indio_dev);
 695 err_irq:
 696         free_irq(info->irq, info);
 697 err_disable_clk:
 698         if (info->data->exit_hw)
 699                 info->data->exit_hw(info);
 700         exynos_adc_disable_clk(info);
 701 err_unprepare_clk:
 702         exynos_adc_unprepare_clk(info);
 703 err_disable_reg:
 704         regulator_disable(info->vdd);
 705         return ret;
 706 }
 707
 708 static int exynos_adc_remove(struct platform_device *pdev)
 709 {
 710         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 711         struct exynos_adc *info = iio_priv(indio_dev);
 712
 713         device_for_each_child(&indio_dev->dev, NULL,
 714                                 exynos_adc_remove_devices);
 715         iio_device_unregister(indio_dev);
 716         free_irq(info->irq, info);
 717         if (info->data->exit_hw)
 718                 info->data->exit_hw(info);
 719         exynos_adc_disable_clk(info);
 720         exynos_adc_unprepare_clk(info);
 721         regulator_disable(info->vdd);
 722
 723         return 0;
 724 }
 725
 726 #ifdef CONFIG_PM_SLEEP
 727 static int exynos_adc_suspend(struct device *dev)
 728 {
 729         struct iio_dev *indio_dev = dev_get_drvdata(dev);
 730         struct exynos_adc *info = iio_priv(indio_dev);
 731
 732         if (info->data->exit_hw)
 733                 info->data->exit_hw(info);
 734         exynos_adc_disable_clk(info);
 735         regulator_disable(info->vdd);
 736
 737         return 0;
 738 }
 739
 740 static int exynos_adc_resume(struct device *dev)
 741 {
 742         struct iio_dev *indio_dev = dev_get_drvdata(dev);
 743         struct exynos_adc *info = iio_priv(indio_dev);
 744         int ret;
 745
 746         ret = regulator_enable(info->vdd);
 747         if (ret)
 748                 return ret;
 749
 750         ret = exynos_adc_enable_clk(info);
 751         if (ret)
 752                 return ret;
 753
 754         if (info->data->init_hw)
 755                 info->data->init_hw(info);
 756
 757         return 0;
 758 }
 759 #endif
 760
 761 static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops,
 762                         exynos_adc_suspend,
 763                         exynos_adc_resume);
 764
 765 static struct platform_driver exynos_adc_driver = {
 766         .probe          = exynos_adc_probe,
 767         .remove         = exynos_adc_remove,
 768         .driver         = {
 769                 .name   = "exynos-adc",
 770                 .of_match_table = exynos_adc_match,
 771                 .pm     = &exynos_adc_pm_ops,
 772         },
 773 };
 774
 775 module_platform_driver(exynos_adc_driver);
 776
 777 MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>");
 778 MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
 779 MODULE_LICENSE("GPL v2");