These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / drivers / hid / hid-cp2112.c
1 /*
2  * hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge
3  * Copyright (c) 2013,2014 Uplogix, Inc.
4  * David Barksdale <dbarksdale@uplogix.com>
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  */
15
16 /*
17  * The Silicon Labs CP2112 chip is a USB HID device which provides an
18  * SMBus controller for talking to slave devices and 8 GPIO pins. The
19  * host communicates with the CP2112 via raw HID reports.
20  *
21  * Data Sheet:
22  *   http://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf
23  * Programming Interface Specification:
24  *   http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf
25  */
26
27 #include <linux/gpio.h>
28 #include <linux/hid.h>
29 #include <linux/i2c.h>
30 #include <linux/module.h>
31 #include <linux/nls.h>
32 #include <linux/usb/ch9.h>
33 #include "hid-ids.h"
34
35 enum {
36         CP2112_GPIO_CONFIG              = 0x02,
37         CP2112_GPIO_GET                 = 0x03,
38         CP2112_GPIO_SET                 = 0x04,
39         CP2112_GET_VERSION_INFO         = 0x05,
40         CP2112_SMBUS_CONFIG             = 0x06,
41         CP2112_DATA_READ_REQUEST        = 0x10,
42         CP2112_DATA_WRITE_READ_REQUEST  = 0x11,
43         CP2112_DATA_READ_FORCE_SEND     = 0x12,
44         CP2112_DATA_READ_RESPONSE       = 0x13,
45         CP2112_DATA_WRITE_REQUEST       = 0x14,
46         CP2112_TRANSFER_STATUS_REQUEST  = 0x15,
47         CP2112_TRANSFER_STATUS_RESPONSE = 0x16,
48         CP2112_CANCEL_TRANSFER          = 0x17,
49         CP2112_LOCK_BYTE                = 0x20,
50         CP2112_USB_CONFIG               = 0x21,
51         CP2112_MANUFACTURER_STRING      = 0x22,
52         CP2112_PRODUCT_STRING           = 0x23,
53         CP2112_SERIAL_STRING            = 0x24,
54 };
55
56 enum {
57         STATUS0_IDLE            = 0x00,
58         STATUS0_BUSY            = 0x01,
59         STATUS0_COMPLETE        = 0x02,
60         STATUS0_ERROR           = 0x03,
61 };
62
63 enum {
64         STATUS1_TIMEOUT_NACK            = 0x00,
65         STATUS1_TIMEOUT_BUS             = 0x01,
66         STATUS1_ARBITRATION_LOST        = 0x02,
67         STATUS1_READ_INCOMPLETE         = 0x03,
68         STATUS1_WRITE_INCOMPLETE        = 0x04,
69         STATUS1_SUCCESS                 = 0x05,
70 };
71
72 struct cp2112_smbus_config_report {
73         u8 report;              /* CP2112_SMBUS_CONFIG */
74         __be32 clock_speed;     /* Hz */
75         u8 device_address;      /* Stored in the upper 7 bits */
76         u8 auto_send_read;      /* 1 = enabled, 0 = disabled */
77         __be16 write_timeout;   /* ms, 0 = no timeout */
78         __be16 read_timeout;    /* ms, 0 = no timeout */
79         u8 scl_low_timeout;     /* 1 = enabled, 0 = disabled */
80         __be16 retry_time;      /* # of retries, 0 = no limit */
81 } __packed;
82
83 struct cp2112_usb_config_report {
84         u8 report;      /* CP2112_USB_CONFIG */
85         __le16 vid;     /* Vendor ID */
86         __le16 pid;     /* Product ID */
87         u8 max_power;   /* Power requested in 2mA units */
88         u8 power_mode;  /* 0x00 = bus powered
89                            0x01 = self powered & regulator off
90                            0x02 = self powered & regulator on */
91         u8 release_major;
92         u8 release_minor;
93         u8 mask;        /* What fields to program */
94 } __packed;
95
96 struct cp2112_read_req_report {
97         u8 report;      /* CP2112_DATA_READ_REQUEST */
98         u8 slave_address;
99         __be16 length;
100 } __packed;
101
102 struct cp2112_write_read_req_report {
103         u8 report;      /* CP2112_DATA_WRITE_READ_REQUEST */
104         u8 slave_address;
105         __be16 length;
106         u8 target_address_length;
107         u8 target_address[16];
108 } __packed;
109
110 struct cp2112_write_req_report {
111         u8 report;      /* CP2112_DATA_WRITE_REQUEST */
112         u8 slave_address;
113         u8 length;
114         u8 data[61];
115 } __packed;
116
117 struct cp2112_force_read_report {
118         u8 report;      /* CP2112_DATA_READ_FORCE_SEND */
119         __be16 length;
120 } __packed;
121
122 struct cp2112_xfer_status_report {
123         u8 report;      /* CP2112_TRANSFER_STATUS_RESPONSE */
124         u8 status0;     /* STATUS0_* */
125         u8 status1;     /* STATUS1_* */
126         __be16 retries;
127         __be16 length;
128 } __packed;
129
130 struct cp2112_string_report {
131         u8 dummy;               /* force .string to be aligned */
132         u8 report;              /* CP2112_*_STRING */
133         u8 length;              /* length in bytes of everyting after .report */
134         u8 type;                /* USB_DT_STRING */
135         wchar_t string[30];     /* UTF16_LITTLE_ENDIAN string */
136 } __packed;
137
138 /* Number of times to request transfer status before giving up waiting for a
139    transfer to complete. This may need to be changed if SMBUS clock, retries,
140    or read/write/scl_low timeout settings are changed. */
141 static const int XFER_STATUS_RETRIES = 10;
142
143 /* Time in ms to wait for a CP2112_DATA_READ_RESPONSE or
144    CP2112_TRANSFER_STATUS_RESPONSE. */
145 static const int RESPONSE_TIMEOUT = 50;
146
147 static const struct hid_device_id cp2112_devices[] = {
148         { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
149         { }
150 };
151 MODULE_DEVICE_TABLE(hid, cp2112_devices);
152
153 struct cp2112_device {
154         struct i2c_adapter adap;
155         struct hid_device *hdev;
156         wait_queue_head_t wait;
157         u8 read_data[61];
158         u8 read_length;
159         u8 hwversion;
160         int xfer_status;
161         atomic_t read_avail;
162         atomic_t xfer_avail;
163         struct gpio_chip gc;
164 };
165
166 static int gpio_push_pull = 0xFF;
167 module_param(gpio_push_pull, int, S_IRUGO | S_IWUSR);
168 MODULE_PARM_DESC(gpio_push_pull, "GPIO push-pull configuration bitmask");
169
170 static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
171 {
172         struct cp2112_device *dev = container_of(chip, struct cp2112_device,
173                                                  gc);
174         struct hid_device *hdev = dev->hdev;
175         u8 buf[5];
176         int ret;
177
178         ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
179                                        sizeof(buf), HID_FEATURE_REPORT,
180                                        HID_REQ_GET_REPORT);
181         if (ret != sizeof(buf)) {
182                 hid_err(hdev, "error requesting GPIO config: %d\n", ret);
183                 return ret;
184         }
185
186         buf[1] &= ~(1 << offset);
187         buf[2] = gpio_push_pull;
188
189         ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
190                                  HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
191         if (ret < 0) {
192                 hid_err(hdev, "error setting GPIO config: %d\n", ret);
193                 return ret;
194         }
195
196         return 0;
197 }
198
199 static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
200 {
201         struct cp2112_device *dev = container_of(chip, struct cp2112_device,
202                                                  gc);
203         struct hid_device *hdev = dev->hdev;
204         u8 buf[3];
205         int ret;
206
207         buf[0] = CP2112_GPIO_SET;
208         buf[1] = value ? 0xff : 0;
209         buf[2] = 1 << offset;
210
211         ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf, sizeof(buf),
212                                  HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
213         if (ret < 0)
214                 hid_err(hdev, "error setting GPIO values: %d\n", ret);
215 }
216
217 static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
218 {
219         struct cp2112_device *dev = container_of(chip, struct cp2112_device,
220                                                  gc);
221         struct hid_device *hdev = dev->hdev;
222         u8 buf[2];
223         int ret;
224
225         ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf, sizeof(buf),
226                                        HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
227         if (ret != sizeof(buf)) {
228                 hid_err(hdev, "error requesting GPIO values: %d\n", ret);
229                 return ret;
230         }
231
232         return (buf[1] >> offset) & 1;
233 }
234
235 static int cp2112_gpio_direction_output(struct gpio_chip *chip,
236                                         unsigned offset, int value)
237 {
238         struct cp2112_device *dev = container_of(chip, struct cp2112_device,
239                                                  gc);
240         struct hid_device *hdev = dev->hdev;
241         u8 buf[5];
242         int ret;
243
244         ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
245                                        sizeof(buf), HID_FEATURE_REPORT,
246                                        HID_REQ_GET_REPORT);
247         if (ret != sizeof(buf)) {
248                 hid_err(hdev, "error requesting GPIO config: %d\n", ret);
249                 return ret;
250         }
251
252         buf[1] |= 1 << offset;
253         buf[2] = gpio_push_pull;
254
255         ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
256                                  HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
257         if (ret < 0) {
258                 hid_err(hdev, "error setting GPIO config: %d\n", ret);
259                 return ret;
260         }
261
262         /*
263          * Set gpio value when output direction is already set,
264          * as specified in AN495, Rev. 0.2, cpt. 4.4
265          */
266         cp2112_gpio_set(chip, offset, value);
267
268         return 0;
269 }
270
271 static int cp2112_hid_get(struct hid_device *hdev, unsigned char report_number,
272                           u8 *data, size_t count, unsigned char report_type)
273 {
274         u8 *buf;
275         int ret;
276
277         buf = kmalloc(count, GFP_KERNEL);
278         if (!buf)
279                 return -ENOMEM;
280
281         ret = hid_hw_raw_request(hdev, report_number, buf, count,
282                                        report_type, HID_REQ_GET_REPORT);
283         memcpy(data, buf, count);
284         kfree(buf);
285         return ret;
286 }
287
288 static int cp2112_hid_output(struct hid_device *hdev, u8 *data, size_t count,
289                              unsigned char report_type)
290 {
291         u8 *buf;
292         int ret;
293
294         buf = kmemdup(data, count, GFP_KERNEL);
295         if (!buf)
296                 return -ENOMEM;
297
298         if (report_type == HID_OUTPUT_REPORT)
299                 ret = hid_hw_output_report(hdev, buf, count);
300         else
301                 ret = hid_hw_raw_request(hdev, buf[0], buf, count, report_type,
302                                 HID_REQ_SET_REPORT);
303
304         kfree(buf);
305         return ret;
306 }
307
308 static int cp2112_wait(struct cp2112_device *dev, atomic_t *avail)
309 {
310         int ret = 0;
311
312         /* We have sent either a CP2112_TRANSFER_STATUS_REQUEST or a
313          * CP2112_DATA_READ_FORCE_SEND and we are waiting for the response to
314          * come in cp2112_raw_event or timeout. There will only be one of these
315          * in flight at any one time. The timeout is extremely large and is a
316          * last resort if the CP2112 has died. If we do timeout we don't expect
317          * to receive the response which would cause data races, it's not like
318          * we can do anything about it anyway.
319          */
320         ret = wait_event_interruptible_timeout(dev->wait,
321                 atomic_read(avail), msecs_to_jiffies(RESPONSE_TIMEOUT));
322         if (-ERESTARTSYS == ret)
323                 return ret;
324         if (!ret)
325                 return -ETIMEDOUT;
326
327         atomic_set(avail, 0);
328         return 0;
329 }
330
331 static int cp2112_xfer_status(struct cp2112_device *dev)
332 {
333         struct hid_device *hdev = dev->hdev;
334         u8 buf[2];
335         int ret;
336
337         buf[0] = CP2112_TRANSFER_STATUS_REQUEST;
338         buf[1] = 0x01;
339         atomic_set(&dev->xfer_avail, 0);
340
341         ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
342         if (ret < 0) {
343                 hid_warn(hdev, "Error requesting status: %d\n", ret);
344                 return ret;
345         }
346
347         ret = cp2112_wait(dev, &dev->xfer_avail);
348         if (ret)
349                 return ret;
350
351         return dev->xfer_status;
352 }
353
354 static int cp2112_read(struct cp2112_device *dev, u8 *data, size_t size)
355 {
356         struct hid_device *hdev = dev->hdev;
357         struct cp2112_force_read_report report;
358         int ret;
359
360         if (size > sizeof(dev->read_data))
361                 size = sizeof(dev->read_data);
362         report.report = CP2112_DATA_READ_FORCE_SEND;
363         report.length = cpu_to_be16(size);
364
365         atomic_set(&dev->read_avail, 0);
366
367         ret = cp2112_hid_output(hdev, &report.report, sizeof(report),
368                                 HID_OUTPUT_REPORT);
369         if (ret < 0) {
370                 hid_warn(hdev, "Error requesting data: %d\n", ret);
371                 return ret;
372         }
373
374         ret = cp2112_wait(dev, &dev->read_avail);
375         if (ret)
376                 return ret;
377
378         hid_dbg(hdev, "read %d of %zd bytes requested\n",
379                 dev->read_length, size);
380
381         if (size > dev->read_length)
382                 size = dev->read_length;
383
384         memcpy(data, dev->read_data, size);
385         return dev->read_length;
386 }
387
388 static int cp2112_read_req(void *buf, u8 slave_address, u16 length)
389 {
390         struct cp2112_read_req_report *report = buf;
391
392         if (length < 1 || length > 512)
393                 return -EINVAL;
394
395         report->report = CP2112_DATA_READ_REQUEST;
396         report->slave_address = slave_address << 1;
397         report->length = cpu_to_be16(length);
398         return sizeof(*report);
399 }
400
401 static int cp2112_write_read_req(void *buf, u8 slave_address, u16 length,
402                                  u8 command, u8 *data, u8 data_length)
403 {
404         struct cp2112_write_read_req_report *report = buf;
405
406         if (length < 1 || length > 512
407             || data_length > sizeof(report->target_address) - 1)
408                 return -EINVAL;
409
410         report->report = CP2112_DATA_WRITE_READ_REQUEST;
411         report->slave_address = slave_address << 1;
412         report->length = cpu_to_be16(length);
413         report->target_address_length = data_length + 1;
414         report->target_address[0] = command;
415         memcpy(&report->target_address[1], data, data_length);
416         return data_length + 6;
417 }
418
419 static int cp2112_write_req(void *buf, u8 slave_address, u8 command, u8 *data,
420                             u8 data_length)
421 {
422         struct cp2112_write_req_report *report = buf;
423
424         if (data_length > sizeof(report->data) - 1)
425                 return -EINVAL;
426
427         report->report = CP2112_DATA_WRITE_REQUEST;
428         report->slave_address = slave_address << 1;
429         report->length = data_length + 1;
430         report->data[0] = command;
431         memcpy(&report->data[1], data, data_length);
432         return data_length + 4;
433 }
434
435 static int cp2112_i2c_write_req(void *buf, u8 slave_address, u8 *data,
436                                 u8 data_length)
437 {
438         struct cp2112_write_req_report *report = buf;
439
440         if (data_length > sizeof(report->data))
441                 return -EINVAL;
442
443         report->report = CP2112_DATA_WRITE_REQUEST;
444         report->slave_address = slave_address << 1;
445         report->length = data_length;
446         memcpy(report->data, data, data_length);
447         return data_length + 3;
448 }
449
450 static int cp2112_i2c_write_read_req(void *buf, u8 slave_address,
451                                      u8 *addr, int addr_length,
452                                      int read_length)
453 {
454         struct cp2112_write_read_req_report *report = buf;
455
456         if (read_length < 1 || read_length > 512 ||
457             addr_length > sizeof(report->target_address))
458                 return -EINVAL;
459
460         report->report = CP2112_DATA_WRITE_READ_REQUEST;
461         report->slave_address = slave_address << 1;
462         report->length = cpu_to_be16(read_length);
463         report->target_address_length = addr_length;
464         memcpy(report->target_address, addr, addr_length);
465         return addr_length + 5;
466 }
467
468 static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
469                            int num)
470 {
471         struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
472         struct hid_device *hdev = dev->hdev;
473         u8 buf[64];
474         ssize_t count;
475         ssize_t read_length = 0;
476         u8 *read_buf = NULL;
477         unsigned int retries;
478         int ret;
479
480         hid_dbg(hdev, "I2C %d messages\n", num);
481
482         if (num == 1) {
483                 if (msgs->flags & I2C_M_RD) {
484                         hid_dbg(hdev, "I2C read %#04x len %d\n",
485                                 msgs->addr, msgs->len);
486                         read_length = msgs->len;
487                         read_buf = msgs->buf;
488                         count = cp2112_read_req(buf, msgs->addr, msgs->len);
489                 } else {
490                         hid_dbg(hdev, "I2C write %#04x len %d\n",
491                                 msgs->addr, msgs->len);
492                         count = cp2112_i2c_write_req(buf, msgs->addr,
493                                                      msgs->buf, msgs->len);
494                 }
495                 if (count < 0)
496                         return count;
497         } else if (dev->hwversion > 1 &&  /* no repeated start in rev 1 */
498                    num == 2 &&
499                    msgs[0].addr == msgs[1].addr &&
500                    !(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD)) {
501                 hid_dbg(hdev, "I2C write-read %#04x wlen %d rlen %d\n",
502                         msgs[0].addr, msgs[0].len, msgs[1].len);
503                 read_length = msgs[1].len;
504                 read_buf = msgs[1].buf;
505                 count = cp2112_i2c_write_read_req(buf, msgs[0].addr,
506                                 msgs[0].buf, msgs[0].len, msgs[1].len);
507                 if (count < 0)
508                         return count;
509         } else {
510                 hid_err(hdev,
511                         "Multi-message I2C transactions not supported\n");
512                 return -EOPNOTSUPP;
513         }
514
515         ret = hid_hw_power(hdev, PM_HINT_FULLON);
516         if (ret < 0) {
517                 hid_err(hdev, "power management error: %d\n", ret);
518                 return ret;
519         }
520
521         ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
522         if (ret < 0) {
523                 hid_warn(hdev, "Error starting transaction: %d\n", ret);
524                 goto power_normal;
525         }
526
527         for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
528                 ret = cp2112_xfer_status(dev);
529                 if (-EBUSY == ret)
530                         continue;
531                 if (ret < 0)
532                         goto power_normal;
533                 break;
534         }
535
536         if (XFER_STATUS_RETRIES <= retries) {
537                 hid_warn(hdev, "Transfer timed out, cancelling.\n");
538                 buf[0] = CP2112_CANCEL_TRANSFER;
539                 buf[1] = 0x01;
540
541                 ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
542                 if (ret < 0)
543                         hid_warn(hdev, "Error cancelling transaction: %d\n",
544                                  ret);
545
546                 ret = -ETIMEDOUT;
547                 goto power_normal;
548         }
549
550         for (count = 0; count < read_length;) {
551                 ret = cp2112_read(dev, read_buf + count, read_length - count);
552                 if (ret < 0)
553                         goto power_normal;
554                 if (ret == 0) {
555                         hid_err(hdev, "read returned 0\n");
556                         ret = -EIO;
557                         goto power_normal;
558                 }
559                 count += ret;
560                 if (count > read_length) {
561                         /*
562                          * The hardware returned too much data.
563                          * This is mostly harmless because cp2112_read()
564                          * has a limit check so didn't overrun our
565                          * buffer.  Nevertheless, we return an error
566                          * because something is seriously wrong and
567                          * it shouldn't go unnoticed.
568                          */
569                         hid_err(hdev, "long read: %d > %zd\n",
570                                 ret, read_length - count + ret);
571                         ret = -EIO;
572                         goto power_normal;
573                 }
574         }
575
576         /* return the number of transferred messages */
577         ret = num;
578
579 power_normal:
580         hid_hw_power(hdev, PM_HINT_NORMAL);
581         hid_dbg(hdev, "I2C transfer finished: %d\n", ret);
582         return ret;
583 }
584
585 static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
586                        unsigned short flags, char read_write, u8 command,
587                        int size, union i2c_smbus_data *data)
588 {
589         struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
590         struct hid_device *hdev = dev->hdev;
591         u8 buf[64];
592         __le16 word;
593         ssize_t count;
594         size_t read_length = 0;
595         unsigned int retries;
596         int ret;
597
598         hid_dbg(hdev, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n",
599                 read_write == I2C_SMBUS_WRITE ? "write" : "read",
600                 addr, flags, command, size);
601
602         switch (size) {
603         case I2C_SMBUS_BYTE:
604                 read_length = 1;
605
606                 if (I2C_SMBUS_READ == read_write)
607                         count = cp2112_read_req(buf, addr, read_length);
608                 else
609                         count = cp2112_write_req(buf, addr, command, NULL,
610                                                  0);
611                 break;
612         case I2C_SMBUS_BYTE_DATA:
613                 read_length = 1;
614
615                 if (I2C_SMBUS_READ == read_write)
616                         count = cp2112_write_read_req(buf, addr, read_length,
617                                                       command, NULL, 0);
618                 else
619                         count = cp2112_write_req(buf, addr, command,
620                                                  &data->byte, 1);
621                 break;
622         case I2C_SMBUS_WORD_DATA:
623                 read_length = 2;
624                 word = cpu_to_le16(data->word);
625
626                 if (I2C_SMBUS_READ == read_write)
627                         count = cp2112_write_read_req(buf, addr, read_length,
628                                                       command, NULL, 0);
629                 else
630                         count = cp2112_write_req(buf, addr, command,
631                                                  (u8 *)&word, 2);
632                 break;
633         case I2C_SMBUS_PROC_CALL:
634                 size = I2C_SMBUS_WORD_DATA;
635                 read_write = I2C_SMBUS_READ;
636                 read_length = 2;
637                 word = cpu_to_le16(data->word);
638
639                 count = cp2112_write_read_req(buf, addr, read_length, command,
640                                               (u8 *)&word, 2);
641                 break;
642         case I2C_SMBUS_I2C_BLOCK_DATA:
643                 size = I2C_SMBUS_BLOCK_DATA;
644                 /* fallthrough */
645         case I2C_SMBUS_BLOCK_DATA:
646                 if (I2C_SMBUS_READ == read_write) {
647                         count = cp2112_write_read_req(buf, addr,
648                                                       I2C_SMBUS_BLOCK_MAX,
649                                                       command, NULL, 0);
650                 } else {
651                         count = cp2112_write_req(buf, addr, command,
652                                                  data->block,
653                                                  data->block[0] + 1);
654                 }
655                 break;
656         case I2C_SMBUS_BLOCK_PROC_CALL:
657                 size = I2C_SMBUS_BLOCK_DATA;
658                 read_write = I2C_SMBUS_READ;
659
660                 count = cp2112_write_read_req(buf, addr, I2C_SMBUS_BLOCK_MAX,
661                                               command, data->block,
662                                               data->block[0] + 1);
663                 break;
664         default:
665                 hid_warn(hdev, "Unsupported transaction %d\n", size);
666                 return -EOPNOTSUPP;
667         }
668
669         if (count < 0)
670                 return count;
671
672         ret = hid_hw_power(hdev, PM_HINT_FULLON);
673         if (ret < 0) {
674                 hid_err(hdev, "power management error: %d\n", ret);
675                 return ret;
676         }
677
678         ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
679         if (ret < 0) {
680                 hid_warn(hdev, "Error starting transaction: %d\n", ret);
681                 goto power_normal;
682         }
683
684         for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
685                 ret = cp2112_xfer_status(dev);
686                 if (-EBUSY == ret)
687                         continue;
688                 if (ret < 0)
689                         goto power_normal;
690                 break;
691         }
692
693         if (XFER_STATUS_RETRIES <= retries) {
694                 hid_warn(hdev, "Transfer timed out, cancelling.\n");
695                 buf[0] = CP2112_CANCEL_TRANSFER;
696                 buf[1] = 0x01;
697
698                 ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
699                 if (ret < 0)
700                         hid_warn(hdev, "Error cancelling transaction: %d\n",
701                                  ret);
702
703                 ret = -ETIMEDOUT;
704                 goto power_normal;
705         }
706
707         if (I2C_SMBUS_WRITE == read_write) {
708                 ret = 0;
709                 goto power_normal;
710         }
711
712         if (I2C_SMBUS_BLOCK_DATA == size)
713                 read_length = ret;
714
715         ret = cp2112_read(dev, buf, read_length);
716         if (ret < 0)
717                 goto power_normal;
718         if (ret != read_length) {
719                 hid_warn(hdev, "short read: %d < %zd\n", ret, read_length);
720                 ret = -EIO;
721                 goto power_normal;
722         }
723
724         switch (size) {
725         case I2C_SMBUS_BYTE:
726         case I2C_SMBUS_BYTE_DATA:
727                 data->byte = buf[0];
728                 break;
729         case I2C_SMBUS_WORD_DATA:
730                 data->word = le16_to_cpup((__le16 *)buf);
731                 break;
732         case I2C_SMBUS_BLOCK_DATA:
733                 if (read_length > I2C_SMBUS_BLOCK_MAX) {
734                         ret = -EPROTO;
735                         goto power_normal;
736                 }
737
738                 memcpy(data->block, buf, read_length);
739                 break;
740         }
741
742         ret = 0;
743 power_normal:
744         hid_hw_power(hdev, PM_HINT_NORMAL);
745         hid_dbg(hdev, "transfer finished: %d\n", ret);
746         return ret;
747 }
748
749 static u32 cp2112_functionality(struct i2c_adapter *adap)
750 {
751         return I2C_FUNC_I2C |
752                 I2C_FUNC_SMBUS_BYTE |
753                 I2C_FUNC_SMBUS_BYTE_DATA |
754                 I2C_FUNC_SMBUS_WORD_DATA |
755                 I2C_FUNC_SMBUS_BLOCK_DATA |
756                 I2C_FUNC_SMBUS_I2C_BLOCK |
757                 I2C_FUNC_SMBUS_PROC_CALL |
758                 I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
759 }
760
761 static const struct i2c_algorithm smbus_algorithm = {
762         .master_xfer    = cp2112_i2c_xfer,
763         .smbus_xfer     = cp2112_xfer,
764         .functionality  = cp2112_functionality,
765 };
766
767 static int cp2112_get_usb_config(struct hid_device *hdev,
768                                  struct cp2112_usb_config_report *cfg)
769 {
770         int ret;
771
772         ret = cp2112_hid_get(hdev, CP2112_USB_CONFIG, (u8 *)cfg, sizeof(*cfg),
773                              HID_FEATURE_REPORT);
774         if (ret != sizeof(*cfg)) {
775                 hid_err(hdev, "error reading usb config: %d\n", ret);
776                 if (ret < 0)
777                         return ret;
778                 return -EIO;
779         }
780
781         return 0;
782 }
783
784 static int cp2112_set_usb_config(struct hid_device *hdev,
785                                  struct cp2112_usb_config_report *cfg)
786 {
787         int ret;
788
789         BUG_ON(cfg->report != CP2112_USB_CONFIG);
790
791         ret = cp2112_hid_output(hdev, (u8 *)cfg, sizeof(*cfg),
792                                 HID_FEATURE_REPORT);
793         if (ret != sizeof(*cfg)) {
794                 hid_err(hdev, "error writing usb config: %d\n", ret);
795                 if (ret < 0)
796                         return ret;
797                 return -EIO;
798         }
799
800         return 0;
801 }
802
803 static void chmod_sysfs_attrs(struct hid_device *hdev);
804
805 #define CP2112_CONFIG_ATTR(name, store, format, ...) \
806 static ssize_t name##_store(struct device *kdev, \
807                             struct device_attribute *attr, const char *buf, \
808                             size_t count) \
809 { \
810         struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \
811         struct cp2112_usb_config_report cfg; \
812         int ret = cp2112_get_usb_config(hdev, &cfg); \
813         if (ret) \
814                 return ret; \
815         store; \
816         ret = cp2112_set_usb_config(hdev, &cfg); \
817         if (ret) \
818                 return ret; \
819         chmod_sysfs_attrs(hdev); \
820         return count; \
821 } \
822 static ssize_t name##_show(struct device *kdev, \
823                            struct device_attribute *attr, char *buf) \
824 { \
825         struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \
826         struct cp2112_usb_config_report cfg; \
827         int ret = cp2112_get_usb_config(hdev, &cfg); \
828         if (ret) \
829                 return ret; \
830         return scnprintf(buf, PAGE_SIZE, format, ##__VA_ARGS__); \
831 } \
832 static DEVICE_ATTR_RW(name);
833
834 CP2112_CONFIG_ATTR(vendor_id, ({
835         u16 vid;
836
837         if (sscanf(buf, "%hi", &vid) != 1)
838                 return -EINVAL;
839
840         cfg.vid = cpu_to_le16(vid);
841         cfg.mask = 0x01;
842 }), "0x%04x\n", le16_to_cpu(cfg.vid));
843
844 CP2112_CONFIG_ATTR(product_id, ({
845         u16 pid;
846
847         if (sscanf(buf, "%hi", &pid) != 1)
848                 return -EINVAL;
849
850         cfg.pid = cpu_to_le16(pid);
851         cfg.mask = 0x02;
852 }), "0x%04x\n", le16_to_cpu(cfg.pid));
853
854 CP2112_CONFIG_ATTR(max_power, ({
855         int mA;
856
857         if (sscanf(buf, "%i", &mA) != 1)
858                 return -EINVAL;
859
860         cfg.max_power = (mA + 1) / 2;
861         cfg.mask = 0x04;
862 }), "%u mA\n", cfg.max_power * 2);
863
864 CP2112_CONFIG_ATTR(power_mode, ({
865         if (sscanf(buf, "%hhi", &cfg.power_mode) != 1)
866                 return -EINVAL;
867
868         cfg.mask = 0x08;
869 }), "%u\n", cfg.power_mode);
870
871 CP2112_CONFIG_ATTR(release_version, ({
872         if (sscanf(buf, "%hhi.%hhi", &cfg.release_major, &cfg.release_minor)
873             != 2)
874                 return -EINVAL;
875
876         cfg.mask = 0x10;
877 }), "%u.%u\n", cfg.release_major, cfg.release_minor);
878
879 #undef CP2112_CONFIG_ATTR
880
881 struct cp2112_pstring_attribute {
882         struct device_attribute attr;
883         unsigned char report;
884 };
885
886 static ssize_t pstr_store(struct device *kdev,
887                           struct device_attribute *kattr, const char *buf,
888                           size_t count)
889 {
890         struct hid_device *hdev = container_of(kdev, struct hid_device, dev);
891         struct cp2112_pstring_attribute *attr =
892                 container_of(kattr, struct cp2112_pstring_attribute, attr);
893         struct cp2112_string_report report;
894         int ret;
895
896         memset(&report, 0, sizeof(report));
897
898         ret = utf8s_to_utf16s(buf, count, UTF16_LITTLE_ENDIAN,
899                               report.string, ARRAY_SIZE(report.string));
900         report.report = attr->report;
901         report.length = ret * sizeof(report.string[0]) + 2;
902         report.type = USB_DT_STRING;
903
904         ret = cp2112_hid_output(hdev, &report.report, report.length + 1,
905                                 HID_FEATURE_REPORT);
906         if (ret != report.length + 1) {
907                 hid_err(hdev, "error writing %s string: %d\n", kattr->attr.name,
908                         ret);
909                 if (ret < 0)
910                         return ret;
911                 return -EIO;
912         }
913
914         chmod_sysfs_attrs(hdev);
915         return count;
916 }
917
918 static ssize_t pstr_show(struct device *kdev,
919                          struct device_attribute *kattr, char *buf)
920 {
921         struct hid_device *hdev = container_of(kdev, struct hid_device, dev);
922         struct cp2112_pstring_attribute *attr =
923                 container_of(kattr, struct cp2112_pstring_attribute, attr);
924         struct cp2112_string_report report;
925         u8 length;
926         int ret;
927
928         ret = cp2112_hid_get(hdev, attr->report, &report.report,
929                              sizeof(report) - 1, HID_FEATURE_REPORT);
930         if (ret < 3) {
931                 hid_err(hdev, "error reading %s string: %d\n", kattr->attr.name,
932                         ret);
933                 if (ret < 0)
934                         return ret;
935                 return -EIO;
936         }
937
938         if (report.length < 2) {
939                 hid_err(hdev, "invalid %s string length: %d\n",
940                         kattr->attr.name, report.length);
941                 return -EIO;
942         }
943
944         length = report.length > ret - 1 ? ret - 1 : report.length;
945         length = (length - 2) / sizeof(report.string[0]);
946         ret = utf16s_to_utf8s(report.string, length, UTF16_LITTLE_ENDIAN, buf,
947                               PAGE_SIZE - 1);
948         buf[ret++] = '\n';
949         return ret;
950 }
951
952 #define CP2112_PSTR_ATTR(name, _report) \
953 static struct cp2112_pstring_attribute dev_attr_##name = { \
954         .attr = __ATTR(name, (S_IWUSR | S_IRUGO), pstr_show, pstr_store), \
955         .report = _report, \
956 };
957
958 CP2112_PSTR_ATTR(manufacturer,  CP2112_MANUFACTURER_STRING);
959 CP2112_PSTR_ATTR(product,       CP2112_PRODUCT_STRING);
960 CP2112_PSTR_ATTR(serial,        CP2112_SERIAL_STRING);
961
962 #undef CP2112_PSTR_ATTR
963
964 static const struct attribute_group cp2112_attr_group = {
965         .attrs = (struct attribute *[]){
966                 &dev_attr_vendor_id.attr,
967                 &dev_attr_product_id.attr,
968                 &dev_attr_max_power.attr,
969                 &dev_attr_power_mode.attr,
970                 &dev_attr_release_version.attr,
971                 &dev_attr_manufacturer.attr.attr,
972                 &dev_attr_product.attr.attr,
973                 &dev_attr_serial.attr.attr,
974                 NULL
975         }
976 };
977
978 /* Chmoding our sysfs attributes is simply a way to expose which fields in the
979  * PROM have already been programmed. We do not depend on this preventing
980  * writing to these attributes since the CP2112 will simply ignore writes to
981  * already-programmed fields. This is why there is no sense in fixing this
982  * racy behaviour.
983  */
984 static void chmod_sysfs_attrs(struct hid_device *hdev)
985 {
986         struct attribute **attr;
987         u8 buf[2];
988         int ret;
989
990         ret = cp2112_hid_get(hdev, CP2112_LOCK_BYTE, buf, sizeof(buf),
991                              HID_FEATURE_REPORT);
992         if (ret != sizeof(buf)) {
993                 hid_err(hdev, "error reading lock byte: %d\n", ret);
994                 return;
995         }
996
997         for (attr = cp2112_attr_group.attrs; *attr; ++attr) {
998                 umode_t mode = (buf[1] & 1) ? S_IWUSR | S_IRUGO : S_IRUGO;
999                 ret = sysfs_chmod_file(&hdev->dev.kobj, *attr, mode);
1000                 if (ret < 0)
1001                         hid_err(hdev, "error chmoding sysfs file %s\n",
1002                                 (*attr)->name);
1003                 buf[1] >>= 1;
1004         }
1005 }
1006
1007 static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
1008 {
1009         struct cp2112_device *dev;
1010         u8 buf[3];
1011         struct cp2112_smbus_config_report config;
1012         int ret;
1013
1014         ret = hid_parse(hdev);
1015         if (ret) {
1016                 hid_err(hdev, "parse failed\n");
1017                 return ret;
1018         }
1019
1020         ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
1021         if (ret) {
1022                 hid_err(hdev, "hw start failed\n");
1023                 return ret;
1024         }
1025
1026         ret = hid_hw_open(hdev);
1027         if (ret) {
1028                 hid_err(hdev, "hw open failed\n");
1029                 goto err_hid_stop;
1030         }
1031
1032         ret = hid_hw_power(hdev, PM_HINT_FULLON);
1033         if (ret < 0) {
1034                 hid_err(hdev, "power management error: %d\n", ret);
1035                 goto err_hid_close;
1036         }
1037
1038         ret = cp2112_hid_get(hdev, CP2112_GET_VERSION_INFO, buf, sizeof(buf),
1039                              HID_FEATURE_REPORT);
1040         if (ret != sizeof(buf)) {
1041                 hid_err(hdev, "error requesting version\n");
1042                 if (ret >= 0)
1043                         ret = -EIO;
1044                 goto err_power_normal;
1045         }
1046
1047         hid_info(hdev, "Part Number: 0x%02X Device Version: 0x%02X\n",
1048                  buf[1], buf[2]);
1049
1050         ret = cp2112_hid_get(hdev, CP2112_SMBUS_CONFIG, (u8 *)&config,
1051                              sizeof(config), HID_FEATURE_REPORT);
1052         if (ret != sizeof(config)) {
1053                 hid_err(hdev, "error requesting SMBus config\n");
1054                 if (ret >= 0)
1055                         ret = -EIO;
1056                 goto err_power_normal;
1057         }
1058
1059         config.retry_time = cpu_to_be16(1);
1060
1061         ret = cp2112_hid_output(hdev, (u8 *)&config, sizeof(config),
1062                                 HID_FEATURE_REPORT);
1063         if (ret != sizeof(config)) {
1064                 hid_err(hdev, "error setting SMBus config\n");
1065                 if (ret >= 0)
1066                         ret = -EIO;
1067                 goto err_power_normal;
1068         }
1069
1070         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1071         if (!dev) {
1072                 ret = -ENOMEM;
1073                 goto err_power_normal;
1074         }
1075
1076         hid_set_drvdata(hdev, (void *)dev);
1077         dev->hdev               = hdev;
1078         dev->adap.owner         = THIS_MODULE;
1079         dev->adap.class         = I2C_CLASS_HWMON;
1080         dev->adap.algo          = &smbus_algorithm;
1081         dev->adap.algo_data     = dev;
1082         dev->adap.dev.parent    = &hdev->dev;
1083         snprintf(dev->adap.name, sizeof(dev->adap.name),
1084                  "CP2112 SMBus Bridge on hiddev%d", hdev->minor);
1085         dev->hwversion = buf[2];
1086         init_waitqueue_head(&dev->wait);
1087
1088         hid_device_io_start(hdev);
1089         ret = i2c_add_adapter(&dev->adap);
1090         hid_device_io_stop(hdev);
1091
1092         if (ret) {
1093                 hid_err(hdev, "error registering i2c adapter\n");
1094                 goto err_free_dev;
1095         }
1096
1097         hid_dbg(hdev, "adapter registered\n");
1098
1099         dev->gc.label                   = "cp2112_gpio";
1100         dev->gc.direction_input         = cp2112_gpio_direction_input;
1101         dev->gc.direction_output        = cp2112_gpio_direction_output;
1102         dev->gc.set                     = cp2112_gpio_set;
1103         dev->gc.get                     = cp2112_gpio_get;
1104         dev->gc.base                    = -1;
1105         dev->gc.ngpio                   = 8;
1106         dev->gc.can_sleep               = 1;
1107         dev->gc.dev                     = &hdev->dev;
1108
1109         ret = gpiochip_add(&dev->gc);
1110         if (ret < 0) {
1111                 hid_err(hdev, "error registering gpio chip\n");
1112                 goto err_free_i2c;
1113         }
1114
1115         ret = sysfs_create_group(&hdev->dev.kobj, &cp2112_attr_group);
1116         if (ret < 0) {
1117                 hid_err(hdev, "error creating sysfs attrs\n");
1118                 goto err_gpiochip_remove;
1119         }
1120
1121         chmod_sysfs_attrs(hdev);
1122         hid_hw_power(hdev, PM_HINT_NORMAL);
1123
1124         return ret;
1125
1126 err_gpiochip_remove:
1127         gpiochip_remove(&dev->gc);
1128 err_free_i2c:
1129         i2c_del_adapter(&dev->adap);
1130 err_free_dev:
1131         kfree(dev);
1132 err_power_normal:
1133         hid_hw_power(hdev, PM_HINT_NORMAL);
1134 err_hid_close:
1135         hid_hw_close(hdev);
1136 err_hid_stop:
1137         hid_hw_stop(hdev);
1138         return ret;
1139 }
1140
1141 static void cp2112_remove(struct hid_device *hdev)
1142 {
1143         struct cp2112_device *dev = hid_get_drvdata(hdev);
1144
1145         sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
1146         gpiochip_remove(&dev->gc);
1147         i2c_del_adapter(&dev->adap);
1148         /* i2c_del_adapter has finished removing all i2c devices from our
1149          * adapter. Well behaved devices should no longer call our cp2112_xfer
1150          * and should have waited for any pending calls to finish. It has also
1151          * waited for device_unregister(&adap->dev) to complete. Therefore we
1152          * can safely free our struct cp2112_device.
1153          */
1154         hid_hw_close(hdev);
1155         hid_hw_stop(hdev);
1156         kfree(dev);
1157 }
1158
1159 static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
1160                             u8 *data, int size)
1161 {
1162         struct cp2112_device *dev = hid_get_drvdata(hdev);
1163         struct cp2112_xfer_status_report *xfer = (void *)data;
1164
1165         switch (data[0]) {
1166         case CP2112_TRANSFER_STATUS_RESPONSE:
1167                 hid_dbg(hdev, "xfer status: %02x %02x %04x %04x\n",
1168                         xfer->status0, xfer->status1,
1169                         be16_to_cpu(xfer->retries), be16_to_cpu(xfer->length));
1170
1171                 switch (xfer->status0) {
1172                 case STATUS0_IDLE:
1173                         dev->xfer_status = -EAGAIN;
1174                         break;
1175                 case STATUS0_BUSY:
1176                         dev->xfer_status = -EBUSY;
1177                         break;
1178                 case STATUS0_COMPLETE:
1179                         dev->xfer_status = be16_to_cpu(xfer->length);
1180                         break;
1181                 case STATUS0_ERROR:
1182                         switch (xfer->status1) {
1183                         case STATUS1_TIMEOUT_NACK:
1184                         case STATUS1_TIMEOUT_BUS:
1185                                 dev->xfer_status = -ETIMEDOUT;
1186                                 break;
1187                         default:
1188                                 dev->xfer_status = -EIO;
1189                                 break;
1190                         }
1191                         break;
1192                 default:
1193                         dev->xfer_status = -EINVAL;
1194                         break;
1195                 }
1196
1197                 atomic_set(&dev->xfer_avail, 1);
1198                 break;
1199         case CP2112_DATA_READ_RESPONSE:
1200                 hid_dbg(hdev, "read response: %02x %02x\n", data[1], data[2]);
1201
1202                 dev->read_length = data[2];
1203                 if (dev->read_length > sizeof(dev->read_data))
1204                         dev->read_length = sizeof(dev->read_data);
1205
1206                 memcpy(dev->read_data, &data[3], dev->read_length);
1207                 atomic_set(&dev->read_avail, 1);
1208                 break;
1209         default:
1210                 hid_err(hdev, "unknown report\n");
1211
1212                 return 0;
1213         }
1214
1215         wake_up_interruptible(&dev->wait);
1216         return 1;
1217 }
1218
1219 static struct hid_driver cp2112_driver = {
1220         .name           = "cp2112",
1221         .id_table       = cp2112_devices,
1222         .probe          = cp2112_probe,
1223         .remove         = cp2112_remove,
1224         .raw_event      = cp2112_raw_event,
1225 };
1226
1227 module_hid_driver(cp2112_driver);
1228 MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge");
1229 MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
1230 MODULE_LICENSE("GPL");
1231