kernel/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c

   1 /*
   2  * Copyright © 2011 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  */
  24
  25 #include "mdfld_dsi_dpi.h"
  26 #include "mdfld_output.h"
  27 #include "mdfld_dsi_pkg_sender.h"
  28 #include "tc35876x-dsi-lvds.h"
  29 #include <linux/i2c/tc35876x.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <asm/intel_scu_ipc.h>
  33
  34 static struct i2c_client *tc35876x_client;
  35 static struct i2c_client *cmi_lcd_i2c_client;
  36
  37 #define FLD_MASK(start, end)    (((1 << ((start) - (end) + 1)) - 1) << (end))
  38 #define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
  39
  40 /* DSI D-PHY Layer Registers */
  41 #define D0W_DPHYCONTTX          0x0004
  42 #define CLW_DPHYCONTRX          0x0020
  43 #define D0W_DPHYCONTRX          0x0024
  44 #define D1W_DPHYCONTRX          0x0028
  45 #define D2W_DPHYCONTRX          0x002C
  46 #define D3W_DPHYCONTRX          0x0030
  47 #define COM_DPHYCONTRX          0x0038
  48 #define CLW_CNTRL               0x0040
  49 #define D0W_CNTRL               0x0044
  50 #define D1W_CNTRL               0x0048
  51 #define D2W_CNTRL               0x004C
  52 #define D3W_CNTRL               0x0050
  53 #define DFTMODE_CNTRL           0x0054
  54
  55 /* DSI PPI Layer Registers */
  56 #define PPI_STARTPPI            0x0104
  57 #define PPI_BUSYPPI             0x0108
  58 #define PPI_LINEINITCNT         0x0110
  59 #define PPI_LPTXTIMECNT         0x0114
  60 #define PPI_LANEENABLE          0x0134
  61 #define PPI_TX_RX_TA            0x013C
  62 #define PPI_CLS_ATMR            0x0140
  63 #define PPI_D0S_ATMR            0x0144
  64 #define PPI_D1S_ATMR            0x0148
  65 #define PPI_D2S_ATMR            0x014C
  66 #define PPI_D3S_ATMR            0x0150
  67 #define PPI_D0S_CLRSIPOCOUNT    0x0164
  68 #define PPI_D1S_CLRSIPOCOUNT    0x0168
  69 #define PPI_D2S_CLRSIPOCOUNT    0x016C
  70 #define PPI_D3S_CLRSIPOCOUNT    0x0170
  71 #define CLS_PRE                 0x0180
  72 #define D0S_PRE                 0x0184
  73 #define D1S_PRE                 0x0188
  74 #define D2S_PRE                 0x018C
  75 #define D3S_PRE                 0x0190
  76 #define CLS_PREP                0x01A0
  77 #define D0S_PREP                0x01A4
  78 #define D1S_PREP                0x01A8
  79 #define D2S_PREP                0x01AC
  80 #define D3S_PREP                0x01B0
  81 #define CLS_ZERO                0x01C0
  82 #define D0S_ZERO                0x01C4
  83 #define D1S_ZERO                0x01C8
  84 #define D2S_ZERO                0x01CC
  85 #define D3S_ZERO                0x01D0
  86 #define PPI_CLRFLG              0x01E0
  87 #define PPI_CLRSIPO             0x01E4
  88 #define HSTIMEOUT               0x01F0
  89 #define HSTIMEOUTENABLE         0x01F4
  90
  91 /* DSI Protocol Layer Registers */
  92 #define DSI_STARTDSI            0x0204
  93 #define DSI_BUSYDSI             0x0208
  94 #define DSI_LANEENABLE          0x0210
  95 #define DSI_LANESTATUS0         0x0214
  96 #define DSI_LANESTATUS1         0x0218
  97 #define DSI_INTSTATUS           0x0220
  98 #define DSI_INTMASK             0x0224
  99 #define DSI_INTCLR              0x0228
 100 #define DSI_LPTXTO              0x0230
 101
 102 /* DSI General Registers */
 103 #define DSIERRCNT               0x0300
 104
 105 /* DSI Application Layer Registers */
 106 #define APLCTRL                 0x0400
 107 #define RDPKTLN                 0x0404
 108
 109 /* Video Path Registers */
 110 #define VPCTRL                  0x0450
 111 #define HTIM1                   0x0454
 112 #define HTIM2                   0x0458
 113 #define VTIM1                   0x045C
 114 #define VTIM2                   0x0460
 115 #define VFUEN                   0x0464
 116
 117 /* LVDS Registers */
 118 #define LVMX0003                0x0480
 119 #define LVMX0407                0x0484
 120 #define LVMX0811                0x0488
 121 #define LVMX1215                0x048C
 122 #define LVMX1619                0x0490
 123 #define LVMX2023                0x0494
 124 #define LVMX2427                0x0498
 125 #define LVCFG                   0x049C
 126 #define LVPHY0                  0x04A0
 127 #define LVPHY1                  0x04A4
 128
 129 /* System Registers */
 130 #define SYSSTAT                 0x0500
 131 #define SYSRST                  0x0504
 132
 133 /* GPIO Registers */
 134 /*#define GPIOC                 0x0520*/
 135 #define GPIOO                   0x0524
 136 #define GPIOI                   0x0528
 137
 138 /* I2C Registers */
 139 #define I2CTIMCTRL              0x0540
 140 #define I2CMADDR                0x0544
 141 #define WDATAQ                  0x0548
 142 #define RDATAQ                  0x054C
 143
 144 /* Chip/Rev Registers */
 145 #define IDREG                   0x0580
 146
 147 /* Debug Registers */
 148 #define DEBUG00                 0x05A0
 149 #define DEBUG01                 0x05A4
 150
 151 /* Panel CABC registers */
 152 #define PANEL_PWM_CONTROL       0x90
 153 #define PANEL_FREQ_DIVIDER_HI   0x91
 154 #define PANEL_FREQ_DIVIDER_LO   0x92
 155 #define PANEL_DUTY_CONTROL      0x93
 156 #define PANEL_MODIFY_RGB        0x94
 157 #define PANEL_FRAMERATE_CONTROL 0x96
 158 #define PANEL_PWM_MIN           0x97
 159 #define PANEL_PWM_REF           0x98
 160 #define PANEL_PWM_MAX           0x99
 161 #define PANEL_ALLOW_DISTORT     0x9A
 162 #define PANEL_BYPASS_PWMI       0x9B
 163
 164 /* Panel color management registers */
 165 #define PANEL_CM_ENABLE         0x700
 166 #define PANEL_CM_HUE            0x701
 167 #define PANEL_CM_SATURATION     0x702
 168 #define PANEL_CM_INTENSITY      0x703
 169 #define PANEL_CM_BRIGHTNESS     0x704
 170 #define PANEL_CM_CE_ENABLE      0x705
 171 #define PANEL_CM_PEAK_EN        0x710
 172 #define PANEL_CM_GAIN           0x711
 173 #define PANEL_CM_HUETABLE_START 0x730
 174 #define PANEL_CM_HUETABLE_END   0x747 /* inclusive */
 175
 176 /* Input muxing for registers LVMX0003...LVMX2427 */
 177 enum {
 178         INPUT_R0,       /* 0 */
 179         INPUT_R1,
 180         INPUT_R2,
 181         INPUT_R3,
 182         INPUT_R4,
 183         INPUT_R5,
 184         INPUT_R6,
 185         INPUT_R7,
 186         INPUT_G0,       /* 8 */
 187         INPUT_G1,
 188         INPUT_G2,
 189         INPUT_G3,
 190         INPUT_G4,
 191         INPUT_G5,
 192         INPUT_G6,
 193         INPUT_G7,
 194         INPUT_B0,       /* 16 */
 195         INPUT_B1,
 196         INPUT_B2,
 197         INPUT_B3,
 198         INPUT_B4,
 199         INPUT_B5,
 200         INPUT_B6,
 201         INPUT_B7,
 202         INPUT_HSYNC,    /* 24 */
 203         INPUT_VSYNC,
 204         INPUT_DE,
 205         LOGIC_0,
 206         /* 28...31 undefined */
 207 };
 208
 209 #define INPUT_MUX(lvmx03, lvmx02, lvmx01, lvmx00)               \
 210         (FLD_VAL(lvmx03, 29, 24) | FLD_VAL(lvmx02, 20, 16) |    \
 211         FLD_VAL(lvmx01, 12, 8) | FLD_VAL(lvmx00, 4, 0))
 212
 213 /**
 214  * tc35876x_regw - Write DSI-LVDS bridge register using I2C
 215  * @client: struct i2c_client to use
 216  * @reg: register address
 217  * @value: value to write
 218  *
 219  * Returns 0 on success, or a negative error value.
 220  */
 221 static int tc35876x_regw(struct i2c_client *client, u16 reg, u32 value)
 222 {
 223         int r;
 224         u8 tx_data[] = {
 225                 /* NOTE: Register address big-endian, data little-endian. */
 226                 (reg >> 8) & 0xff,
 227                 reg & 0xff,
 228                 value & 0xff,
 229                 (value >> 8) & 0xff,
 230                 (value >> 16) & 0xff,
 231                 (value >> 24) & 0xff,
 232         };
 233         struct i2c_msg msgs[] = {
 234                 {
 235                         .addr = client->addr,
 236                         .flags = 0,
 237                         .buf = tx_data,
 238                         .len = ARRAY_SIZE(tx_data),
 239                 },
 240         };
 241
 242         r = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 243         if (r < 0) {
 244                 dev_err(&client->dev, "%s: reg 0x%04x val 0x%08x error %d\n",
 245                         __func__, reg, value, r);
 246                 return r;
 247         }
 248
 249         if (r < ARRAY_SIZE(msgs)) {
 250                 dev_err(&client->dev, "%s: reg 0x%04x val 0x%08x msgs %d\n",
 251                         __func__, reg, value, r);
 252                 return -EAGAIN;
 253         }
 254
 255         dev_dbg(&client->dev, "%s: reg 0x%04x val 0x%08x\n",
 256                         __func__, reg, value);
 257
 258         return 0;
 259 }
 260
 261 /**
 262  * tc35876x_regr - Read DSI-LVDS bridge register using I2C
 263  * @client: struct i2c_client to use
 264  * @reg: register address
 265  * @value: pointer for storing the value
 266  *
 267  * Returns 0 on success, or a negative error value.
 268  */
 269 static int tc35876x_regr(struct i2c_client *client, u16 reg, u32 *value)
 270 {
 271         int r;
 272         u8 tx_data[] = {
 273                 (reg >> 8) & 0xff,
 274                 reg & 0xff,
 275         };
 276         u8 rx_data[4];
 277         struct i2c_msg msgs[] = {
 278                 {
 279                         .addr = client->addr,
 280                         .flags = 0,
 281                         .buf = tx_data,
 282                         .len = ARRAY_SIZE(tx_data),
 283                 },
 284                 {
 285                         .addr = client->addr,
 286                         .flags = I2C_M_RD,
 287                         .buf = rx_data,
 288                         .len = ARRAY_SIZE(rx_data),
 289                  },
 290         };
 291
 292         r = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 293         if (r < 0) {
 294                 dev_err(&client->dev, "%s: reg 0x%04x error %d\n", __func__,
 295                         reg, r);
 296                 return r;
 297         }
 298
 299         if (r < ARRAY_SIZE(msgs)) {
 300                 dev_err(&client->dev, "%s: reg 0x%04x msgs %d\n", __func__,
 301                         reg, r);
 302                 return -EAGAIN;
 303         }
 304
 305         *value = rx_data[0] << 24 | rx_data[1] << 16 |
 306                 rx_data[2] << 8 | rx_data[3];
 307
 308         dev_dbg(&client->dev, "%s: reg 0x%04x value 0x%08x\n", __func__,
 309                 reg, *value);
 310
 311         return 0;
 312 }
 313
 314 void tc35876x_set_bridge_reset_state(struct drm_device *dev, int state)
 315 {
 316         struct tc35876x_platform_data *pdata;
 317
 318         if (WARN(!tc35876x_client, "%s called before probe", __func__))
 319                 return;
 320
 321         dev_dbg(&tc35876x_client->dev, "%s: state %d\n", __func__, state);
 322
 323         pdata = dev_get_platdata(&tc35876x_client->dev);
 324
 325         if (pdata->gpio_bridge_reset == -1)
 326                 return;
 327
 328         if (state) {
 329                 gpio_set_value_cansleep(pdata->gpio_bridge_reset, 0);
 330                 mdelay(10);
 331         } else {
 332                 /* Pull MIPI Bridge reset pin to Low */
 333                 gpio_set_value_cansleep(pdata->gpio_bridge_reset, 0);
 334                 mdelay(20);
 335                 /* Pull MIPI Bridge reset pin to High */
 336                 gpio_set_value_cansleep(pdata->gpio_bridge_reset, 1);
 337                 mdelay(40);
 338         }
 339 }
 340
 341 void tc35876x_configure_lvds_bridge(struct drm_device *dev)
 342 {
 343         struct i2c_client *i2c = tc35876x_client;
 344         u32 ppi_lptxtimecnt;
 345         u32 txtagocnt;
 346         u32 txtasurecnt;
 347         u32 id;
 348
 349         if (WARN(!tc35876x_client, "%s called before probe", __func__))
 350                 return;
 351
 352         dev_dbg(&tc35876x_client->dev, "%s\n", __func__);
 353
 354         if (!tc35876x_regr(i2c, IDREG, &id))
 355                 dev_info(&tc35876x_client->dev, "tc35876x ID 0x%08x\n", id);
 356         else
 357                 dev_err(&tc35876x_client->dev, "Cannot read ID\n");
 358
 359         ppi_lptxtimecnt = 4;
 360         txtagocnt = (5 * ppi_lptxtimecnt - 3) / 4;
 361         txtasurecnt = 3 * ppi_lptxtimecnt / 2;
 362         tc35876x_regw(i2c, PPI_TX_RX_TA, FLD_VAL(txtagocnt, 26, 16) |
 363                 FLD_VAL(txtasurecnt, 10, 0));
 364         tc35876x_regw(i2c, PPI_LPTXTIMECNT, FLD_VAL(ppi_lptxtimecnt, 10, 0));
 365
 366         tc35876x_regw(i2c, PPI_D0S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0));
 367         tc35876x_regw(i2c, PPI_D1S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0));
 368         tc35876x_regw(i2c, PPI_D2S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0));
 369         tc35876x_regw(i2c, PPI_D3S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0));
 370
 371         /* Enabling MIPI & PPI lanes, Enable 4 lanes */
 372         tc35876x_regw(i2c, PPI_LANEENABLE,
 373                 BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0));
 374         tc35876x_regw(i2c, DSI_LANEENABLE,
 375                 BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0));
 376         tc35876x_regw(i2c, PPI_STARTPPI, BIT(0));
 377         tc35876x_regw(i2c, DSI_STARTDSI, BIT(0));
 378
 379         /* Setting LVDS output frequency */
 380         tc35876x_regw(i2c, LVPHY0, FLD_VAL(1, 20, 16) |
 381                 FLD_VAL(2, 15, 14) | FLD_VAL(6, 4, 0)); /* 0x00048006 */
 382
 383         /* Setting video panel control register,0x00000120 VTGen=ON ?!?!? */
 384         tc35876x_regw(i2c, VPCTRL, BIT(8) | BIT(5));
 385
 386         /* Horizontal back porch and horizontal pulse width. 0x00280028 */
 387         tc35876x_regw(i2c, HTIM1, FLD_VAL(40, 24, 16) | FLD_VAL(40, 8, 0));
 388
 389         /* Horizontal front porch and horizontal active video size. 0x00500500*/
 390         tc35876x_regw(i2c, HTIM2, FLD_VAL(80, 24, 16) | FLD_VAL(1280, 10, 0));
 391
 392         /* Vertical back porch and vertical sync pulse width. 0x000e000a */
 393         tc35876x_regw(i2c, VTIM1, FLD_VAL(14, 23, 16) | FLD_VAL(10, 7, 0));
 394
 395         /* Vertical front porch and vertical display size. 0x000e0320 */
 396         tc35876x_regw(i2c, VTIM2, FLD_VAL(14, 23, 16) | FLD_VAL(800, 10, 0));
 397
 398         /* Set above HTIM1, HTIM2, VTIM1, and VTIM2 at next VSYNC. */
 399         tc35876x_regw(i2c, VFUEN, BIT(0));
 400
 401         /* Soft reset LCD controller. */
 402         tc35876x_regw(i2c, SYSRST, BIT(2));
 403
 404         /* LVDS-TX input muxing */
 405         tc35876x_regw(i2c, LVMX0003,
 406                 INPUT_MUX(INPUT_R5, INPUT_R4, INPUT_R3, INPUT_R2));
 407         tc35876x_regw(i2c, LVMX0407,
 408                 INPUT_MUX(INPUT_G2, INPUT_R7, INPUT_R1, INPUT_R6));
 409         tc35876x_regw(i2c, LVMX0811,
 410                 INPUT_MUX(INPUT_G1, INPUT_G0, INPUT_G4, INPUT_G3));
 411         tc35876x_regw(i2c, LVMX1215,
 412                 INPUT_MUX(INPUT_B2, INPUT_G7, INPUT_G6, INPUT_G5));
 413         tc35876x_regw(i2c, LVMX1619,
 414                 INPUT_MUX(INPUT_B4, INPUT_B3, INPUT_B1, INPUT_B0));
 415         tc35876x_regw(i2c, LVMX2023,
 416                 INPUT_MUX(LOGIC_0,  INPUT_B7, INPUT_B6, INPUT_B5));
 417         tc35876x_regw(i2c, LVMX2427,
 418                 INPUT_MUX(INPUT_R0, INPUT_DE, INPUT_VSYNC, INPUT_HSYNC));
 419
 420         /* Enable LVDS transmitter. */
 421         tc35876x_regw(i2c, LVCFG, BIT(0));
 422
 423         /* Clear notifications. Don't write reserved bits. Was write 0xffffffff
 424          * to 0x0288, must be in error?! */
 425         tc35876x_regw(i2c, DSI_INTCLR, FLD_MASK(31, 30) | FLD_MASK(22, 0));
 426 }
 427
 428 #define GPIOPWMCTRL     0x38F
 429 #define PWM0CLKDIV0     0x62 /* low byte */
 430 #define PWM0CLKDIV1     0x61 /* high byte */
 431
 432 #define SYSTEMCLK       19200000UL /* 19.2 MHz */
 433 #define PWM_FREQUENCY   9600 /* Hz */
 434
 435 /* f = baseclk / (clkdiv + 1) => clkdiv = (baseclk - f) / f */
 436 static inline u16 calc_clkdiv(unsigned long baseclk, unsigned int f)
 437 {
 438         return (baseclk - f) / f;
 439 }
 440
 441 static void tc35876x_brightness_init(struct drm_device *dev)
 442 {
 443         int ret;
 444         u8 pwmctrl;
 445         u16 clkdiv;
 446
 447         /* Make sure the PWM reference is the 19.2 MHz system clock. Read first
 448          * instead of setting directly to catch potential conflicts between PWM
 449          * users. */
 450         ret = intel_scu_ipc_ioread8(GPIOPWMCTRL, &pwmctrl);
 451         if (ret || pwmctrl != 0x01) {
 452                 if (ret)
 453                         dev_err(&dev->pdev->dev, "GPIOPWMCTRL read failed\n");
 454                 else
 455                         dev_warn(&dev->pdev->dev, "GPIOPWMCTRL was not set to system clock (pwmctrl = 0x%02x)\n", pwmctrl);
 456
 457                 ret = intel_scu_ipc_iowrite8(GPIOPWMCTRL, 0x01);
 458                 if (ret)
 459                         dev_err(&dev->pdev->dev, "GPIOPWMCTRL set failed\n");
 460         }
 461
 462         clkdiv = calc_clkdiv(SYSTEMCLK, PWM_FREQUENCY);
 463
 464         ret = intel_scu_ipc_iowrite8(PWM0CLKDIV1, (clkdiv >> 8) & 0xff);
 465         if (!ret)
 466                 ret = intel_scu_ipc_iowrite8(PWM0CLKDIV0, clkdiv & 0xff);
 467
 468         if (ret)
 469                 dev_err(&dev->pdev->dev, "PWM0CLKDIV set failed\n");
 470         else
 471                 dev_dbg(&dev->pdev->dev, "PWM0CLKDIV set to 0x%04x (%d Hz)\n",
 472                         clkdiv, PWM_FREQUENCY);
 473 }
 474
 475 #define PWM0DUTYCYCLE                   0x67
 476
 477 void tc35876x_brightness_control(struct drm_device *dev, int level)
 478 {
 479         int ret;
 480         u8 duty_val;
 481         u8 panel_duty_val;
 482
 483         level = clamp(level, 0, MDFLD_DSI_BRIGHTNESS_MAX_LEVEL);
 484
 485         /* PWM duty cycle 0x00...0x63 corresponds to 0...99% */
 486         duty_val = level * 0x63 / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL;
 487
 488         /* I won't pretend to understand this formula. The panel spec is quite
 489          * bad engrish.
 490          */
 491         panel_duty_val = (2 * level - 100) * 0xA9 /
 492                          MDFLD_DSI_BRIGHTNESS_MAX_LEVEL + 0x56;
 493
 494         ret = intel_scu_ipc_iowrite8(PWM0DUTYCYCLE, duty_val);
 495         if (ret)
 496                 dev_err(&tc35876x_client->dev, "%s: ipc write fail\n",
 497                         __func__);
 498
 499         if (cmi_lcd_i2c_client) {
 500                 ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client,
 501                                                 PANEL_PWM_MAX, panel_duty_val);
 502                 if (ret < 0)
 503                         dev_err(&cmi_lcd_i2c_client->dev, "%s: i2c write failed\n",
 504                                 __func__);
 505         }
 506 }
 507
 508 void tc35876x_toshiba_bridge_panel_off(struct drm_device *dev)
 509 {
 510         struct tc35876x_platform_data *pdata;
 511
 512         if (WARN(!tc35876x_client, "%s called before probe", __func__))
 513                 return;
 514
 515         dev_dbg(&tc35876x_client->dev, "%s\n", __func__);
 516
 517         pdata = dev_get_platdata(&tc35876x_client->dev);
 518
 519         if (pdata->gpio_panel_bl_en != -1)
 520                 gpio_set_value_cansleep(pdata->gpio_panel_bl_en, 0);
 521
 522         if (pdata->gpio_panel_vadd != -1)
 523                 gpio_set_value_cansleep(pdata->gpio_panel_vadd, 0);
 524 }
 525
 526 void tc35876x_toshiba_bridge_panel_on(struct drm_device *dev)
 527 {
 528         struct tc35876x_platform_data *pdata;
 529         struct drm_psb_private *dev_priv = dev->dev_private;
 530
 531         if (WARN(!tc35876x_client, "%s called before probe", __func__))
 532                 return;
 533
 534         dev_dbg(&tc35876x_client->dev, "%s\n", __func__);
 535
 536         pdata = dev_get_platdata(&tc35876x_client->dev);
 537
 538         if (pdata->gpio_panel_vadd != -1) {
 539                 gpio_set_value_cansleep(pdata->gpio_panel_vadd, 1);
 540                 msleep(260);
 541         }
 542
 543         if (cmi_lcd_i2c_client) {
 544                 int ret;
 545                 dev_dbg(&cmi_lcd_i2c_client->dev, "setting TCON\n");
 546                 /* Bit 4 is average_saving. Setting it to 1, the brightness is
 547                  * referenced to the average of the frame content. 0 means
 548                  * reference to the maximum of frame contents. Bits 3:0 are
 549                  * allow_distort. When set to a nonzero value, all color values
 550                  * between 255-allow_distort*2 and 255 are mapped to the
 551                  * 255-allow_distort*2 value.
 552                  */
 553                 ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client,
 554                                                 PANEL_ALLOW_DISTORT, 0x10);
 555                 if (ret < 0)
 556                         dev_err(&cmi_lcd_i2c_client->dev,
 557                                 "i2c write failed (%d)\n", ret);
 558                 ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client,
 559                                                 PANEL_BYPASS_PWMI, 0);
 560                 if (ret < 0)
 561                         dev_err(&cmi_lcd_i2c_client->dev,
 562                                 "i2c write failed (%d)\n", ret);
 563                 /* Set minimum brightness value - this is tunable */
 564                 ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client,
 565                                                 PANEL_PWM_MIN, 0x35);
 566                 if (ret < 0)
 567                         dev_err(&cmi_lcd_i2c_client->dev,
 568                                 "i2c write failed (%d)\n", ret);
 569         }
 570
 571         if (pdata->gpio_panel_bl_en != -1)
 572                 gpio_set_value_cansleep(pdata->gpio_panel_bl_en, 1);
 573
 574         tc35876x_brightness_control(dev, dev_priv->brightness_adjusted);
 575 }
 576
 577 static struct drm_display_mode *tc35876x_get_config_mode(struct drm_device *dev)
 578 {
 579         struct drm_display_mode *mode;
 580
 581         dev_dbg(&dev->pdev->dev, "%s\n", __func__);
 582
 583         mode = kzalloc(sizeof(*mode), GFP_KERNEL);
 584         if (!mode)
 585                 return NULL;
 586
 587         /* FIXME: do this properly. */
 588         mode->hdisplay = 1280;
 589         mode->vdisplay = 800;
 590         mode->hsync_start = 1360;
 591         mode->hsync_end = 1400;
 592         mode->htotal = 1440;
 593         mode->vsync_start = 814;
 594         mode->vsync_end = 824;
 595         mode->vtotal = 838;
 596         mode->clock = 33324 << 1;
 597
 598         dev_info(&dev->pdev->dev, "hdisplay(w) = %d\n", mode->hdisplay);
 599         dev_info(&dev->pdev->dev, "vdisplay(h) = %d\n", mode->vdisplay);
 600         dev_info(&dev->pdev->dev, "HSS = %d\n", mode->hsync_start);
 601         dev_info(&dev->pdev->dev, "HSE = %d\n", mode->hsync_end);
 602         dev_info(&dev->pdev->dev, "htotal = %d\n", mode->htotal);
 603         dev_info(&dev->pdev->dev, "VSS = %d\n", mode->vsync_start);
 604         dev_info(&dev->pdev->dev, "VSE = %d\n", mode->vsync_end);
 605         dev_info(&dev->pdev->dev, "vtotal = %d\n", mode->vtotal);
 606         dev_info(&dev->pdev->dev, "clock = %d\n", mode->clock);
 607
 608         drm_mode_set_name(mode);
 609         drm_mode_set_crtcinfo(mode, 0);
 610
 611         mode->type |= DRM_MODE_TYPE_PREFERRED;
 612
 613         return mode;
 614 }
 615
 616 /* DV1 Active area 216.96 x 135.6 mm */
 617 #define DV1_PANEL_WIDTH 217
 618 #define DV1_PANEL_HEIGHT 136
 619
 620 static int tc35876x_get_panel_info(struct drm_device *dev, int pipe,
 621                                 struct panel_info *pi)
 622 {
 623         if (!dev || !pi)
 624                 return -EINVAL;
 625
 626         pi->width_mm = DV1_PANEL_WIDTH;
 627         pi->height_mm = DV1_PANEL_HEIGHT;
 628
 629         return 0;
 630 }
 631
 632 static int tc35876x_bridge_probe(struct i2c_client *client,
 633                                 const struct i2c_device_id *id)
 634 {
 635         struct tc35876x_platform_data *pdata;
 636
 637         dev_info(&client->dev, "%s\n", __func__);
 638
 639         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 640                 dev_err(&client->dev, "%s: i2c_check_functionality() failed\n",
 641                         __func__);
 642                 return -ENODEV;
 643         }
 644
 645         pdata = dev_get_platdata(&client->dev);
 646         if (!pdata) {
 647                 dev_err(&client->dev, "%s: no platform data\n", __func__);
 648                 return -ENODEV;
 649         }
 650
 651         if (pdata->gpio_bridge_reset != -1) {
 652                 gpio_request(pdata->gpio_bridge_reset, "tc35876x bridge reset");
 653                 gpio_direction_output(pdata->gpio_bridge_reset, 0);
 654         }
 655
 656         if (pdata->gpio_panel_bl_en != -1) {
 657                 gpio_request(pdata->gpio_panel_bl_en, "tc35876x panel bl en");
 658                 gpio_direction_output(pdata->gpio_panel_bl_en, 0);
 659         }
 660
 661         if (pdata->gpio_panel_vadd != -1) {
 662                 gpio_request(pdata->gpio_panel_vadd, "tc35876x panel vadd");
 663                 gpio_direction_output(pdata->gpio_panel_vadd, 0);
 664         }
 665
 666         tc35876x_client = client;
 667
 668         return 0;
 669 }
 670
 671 static int tc35876x_bridge_remove(struct i2c_client *client)
 672 {
 673         struct tc35876x_platform_data *pdata = dev_get_platdata(&client->dev);
 674
 675         dev_dbg(&client->dev, "%s\n", __func__);
 676
 677         if (pdata->gpio_bridge_reset != -1)
 678                 gpio_free(pdata->gpio_bridge_reset);
 679
 680         if (pdata->gpio_panel_bl_en != -1)
 681                 gpio_free(pdata->gpio_panel_bl_en);
 682
 683         if (pdata->gpio_panel_vadd != -1)
 684                 gpio_free(pdata->gpio_panel_vadd);
 685
 686         tc35876x_client = NULL;
 687
 688         return 0;
 689 }
 690
 691 static const struct i2c_device_id tc35876x_bridge_id[] = {
 692         { "i2c_disp_brig", 0 },
 693         { }
 694 };
 695 MODULE_DEVICE_TABLE(i2c, tc35876x_bridge_id);
 696
 697 static struct i2c_driver tc35876x_bridge_i2c_driver = {
 698         .driver = {
 699                 .name = "i2c_disp_brig",
 700         },
 701         .id_table = tc35876x_bridge_id,
 702         .probe = tc35876x_bridge_probe,
 703         .remove = tc35876x_bridge_remove,
 704 };
 705
 706 /* LCD panel I2C */
 707 static int cmi_lcd_i2c_probe(struct i2c_client *client,
 708                              const struct i2c_device_id *id)
 709 {
 710         dev_info(&client->dev, "%s\n", __func__);
 711
 712         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 713                 dev_err(&client->dev, "%s: i2c_check_functionality() failed\n",
 714                         __func__);
 715                 return -ENODEV;
 716         }
 717
 718         cmi_lcd_i2c_client = client;
 719
 720         return 0;
 721 }
 722
 723 static int cmi_lcd_i2c_remove(struct i2c_client *client)
 724 {
 725         dev_dbg(&client->dev, "%s\n", __func__);
 726
 727         cmi_lcd_i2c_client = NULL;
 728
 729         return 0;
 730 }
 731
 732 static const struct i2c_device_id cmi_lcd_i2c_id[] = {
 733         { "cmi-lcd", 0 },
 734         { }
 735 };
 736 MODULE_DEVICE_TABLE(i2c, cmi_lcd_i2c_id);
 737
 738 static struct i2c_driver cmi_lcd_i2c_driver = {
 739         .driver = {
 740                 .name = "cmi-lcd",
 741         },
 742         .id_table = cmi_lcd_i2c_id,
 743         .probe = cmi_lcd_i2c_probe,
 744         .remove = cmi_lcd_i2c_remove,
 745 };
 746
 747 /* HACK to create I2C device while it's not created by platform code */
 748 #define CMI_LCD_I2C_ADAPTER     2
 749 #define CMI_LCD_I2C_ADDR        0x60
 750
 751 static int cmi_lcd_hack_create_device(void)
 752 {
 753         struct i2c_adapter *adapter;
 754         struct i2c_client *client;
 755         struct i2c_board_info info = {
 756                 .type = "cmi-lcd",
 757                 .addr = CMI_LCD_I2C_ADDR,
 758         };
 759
 760         pr_debug("%s\n", __func__);
 761
 762         adapter = i2c_get_adapter(CMI_LCD_I2C_ADAPTER);
 763         if (!adapter) {
 764                 pr_err("%s: i2c_get_adapter(%d) failed\n", __func__,
 765                         CMI_LCD_I2C_ADAPTER);
 766                 return -EINVAL;
 767         }
 768
 769         client = i2c_new_device(adapter, &info);
 770         if (!client) {
 771                 pr_err("%s: i2c_new_device() failed\n", __func__);
 772                 i2c_put_adapter(adapter);
 773                 return -EINVAL;
 774         }
 775
 776         return 0;
 777 }
 778
 779 static const struct drm_encoder_helper_funcs tc35876x_encoder_helper_funcs = {
 780         .dpms = mdfld_dsi_dpi_dpms,
 781         .mode_fixup = mdfld_dsi_dpi_mode_fixup,
 782         .prepare = mdfld_dsi_dpi_prepare,
 783         .mode_set = mdfld_dsi_dpi_mode_set,
 784         .commit = mdfld_dsi_dpi_commit,
 785 };
 786
 787 static const struct drm_encoder_funcs tc35876x_encoder_funcs = {
 788         .destroy = drm_encoder_cleanup,
 789 };
 790
 791 const struct panel_funcs mdfld_tc35876x_funcs = {
 792         .encoder_funcs = &tc35876x_encoder_funcs,
 793         .encoder_helper_funcs = &tc35876x_encoder_helper_funcs,
 794         .get_config_mode = tc35876x_get_config_mode,
 795         .get_panel_info = tc35876x_get_panel_info,
 796 };
 797
 798 void tc35876x_init(struct drm_device *dev)
 799 {
 800         int r;
 801
 802         dev_dbg(&dev->pdev->dev, "%s\n", __func__);
 803
 804         cmi_lcd_hack_create_device();
 805
 806         r = i2c_add_driver(&cmi_lcd_i2c_driver);
 807         if (r < 0)
 808                 dev_err(&dev->pdev->dev,
 809                         "%s: i2c_add_driver() for %s failed (%d)\n",
 810                         __func__, cmi_lcd_i2c_driver.driver.name, r);
 811
 812         r = i2c_add_driver(&tc35876x_bridge_i2c_driver);
 813         if (r < 0)
 814                 dev_err(&dev->pdev->dev,
 815                         "%s: i2c_add_driver() for %s failed (%d)\n",
 816                         __func__, tc35876x_bridge_i2c_driver.driver.name, r);
 817
 818         tc35876x_brightness_init(dev);
 819 }
 820
 821 void tc35876x_exit(void)
 822 {
 823         pr_debug("%s\n", __func__);
 824
 825         i2c_del_driver(&tc35876x_bridge_i2c_driver);
 826
 827         if (cmi_lcd_i2c_client)
 828                 i2c_del_driver(&cmi_lcd_i2c_driver);
 829 }