Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / dma / hsu / pci.c
1 /*
2  * PCI driver for the High Speed UART DMA
3  *
4  * Copyright (C) 2015 Intel Corporation
5  * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
6  *
7  * Partially based on the bits found in drivers/tty/serial/mfd.c.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13
14 #include <linux/bitops.h>
15 #include <linux/device.h>
16 #include <linux/module.h>
17 #include <linux/pci.h>
18
19 #include "hsu.h"
20
21 #define HSU_PCI_DMASR           0x00
22 #define HSU_PCI_DMAISR          0x04
23
24 #define HSU_PCI_CHAN_OFFSET     0x100
25
26 static irqreturn_t hsu_pci_irq(int irq, void *dev)
27 {
28         struct hsu_dma_chip *chip = dev;
29         u32 dmaisr;
30         unsigned short i;
31         irqreturn_t ret = IRQ_NONE;
32
33         dmaisr = readl(chip->regs + HSU_PCI_DMAISR);
34         for (i = 0; i < chip->pdata->nr_channels; i++) {
35                 if (dmaisr & 0x1)
36                         ret |= hsu_dma_irq(chip, i);
37                 dmaisr >>= 1;
38         }
39
40         return ret;
41 }
42
43 static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
44 {
45         struct hsu_dma_chip *chip;
46         int ret;
47
48         ret = pcim_enable_device(pdev);
49         if (ret)
50                 return ret;
51
52         ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
53         if (ret) {
54                 dev_err(&pdev->dev, "I/O memory remapping failed\n");
55                 return ret;
56         }
57
58         pci_set_master(pdev);
59         pci_try_set_mwi(pdev);
60
61         ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
62         if (ret)
63                 return ret;
64
65         ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
66         if (ret)
67                 return ret;
68
69         chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
70         if (!chip)
71                 return -ENOMEM;
72
73         chip->dev = &pdev->dev;
74         chip->regs = pcim_iomap_table(pdev)[0];
75         chip->length = pci_resource_len(pdev, 0);
76         chip->offset = HSU_PCI_CHAN_OFFSET;
77         chip->irq = pdev->irq;
78
79         pci_enable_msi(pdev);
80
81         ret = hsu_dma_probe(chip);
82         if (ret)
83                 return ret;
84
85         ret = request_irq(chip->irq, hsu_pci_irq, 0, "hsu_dma_pci", chip);
86         if (ret)
87                 goto err_register_irq;
88
89         pci_set_drvdata(pdev, chip);
90
91         return 0;
92
93 err_register_irq:
94         hsu_dma_remove(chip);
95         return ret;
96 }
97
98 static void hsu_pci_remove(struct pci_dev *pdev)
99 {
100         struct hsu_dma_chip *chip = pci_get_drvdata(pdev);
101
102         free_irq(chip->irq, chip);
103         hsu_dma_remove(chip);
104 }
105
106 static const struct pci_device_id hsu_pci_id_table[] = {
107         { PCI_VDEVICE(INTEL, 0x081e), 0 },
108         { PCI_VDEVICE(INTEL, 0x1192), 0 },
109         { }
110 };
111 MODULE_DEVICE_TABLE(pci, hsu_pci_id_table);
112
113 static struct pci_driver hsu_pci_driver = {
114         .name           = "hsu_dma_pci",
115         .id_table       = hsu_pci_id_table,
116         .probe          = hsu_pci_probe,
117         .remove         = hsu_pci_remove,
118 };
119
120 module_pci_driver(hsu_pci_driver);
121
122 MODULE_LICENSE("GPL v2");
123 MODULE_DESCRIPTION("High Speed UART DMA PCI driver");
124 MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");