kernel/drivers/char/nwflash.c

   1 /*
   2  * Flash memory interface rev.5 driver for the Intel
   3  * Flash chips used on the NetWinder.
   4  *
   5  * 20/08/2000   RMK     use __ioremap to map flash into virtual memory
   6  *                      make a few more places use "volatile"
   7  * 22/05/2001   RMK     - Lock read against write
   8  *                      - merge printk level changes (with mods) from Alan Cox.
   9  *                      - use *ppos as the file position, not file->f_pos.
  10  *                      - fix check for out of range pos and r/w size
  11  *
  12  * Please note that we are tampering with the only flash chip in the
  13  * machine, which contains the bootup code.  We therefore have the
  14  * power to convert these machines into doorstops...
  15  */
  16
  17 #include <linux/module.h>
  18 #include <linux/types.h>
  19 #include <linux/fs.h>
  20 #include <linux/errno.h>
  21 #include <linux/mm.h>
  22 #include <linux/delay.h>
  23 #include <linux/proc_fs.h>
  24 #include <linux/miscdevice.h>
  25 #include <linux/spinlock.h>
  26 #include <linux/rwsem.h>
  27 #include <linux/init.h>
  28 #include <linux/mutex.h>
  29 #include <linux/jiffies.h>
  30
  31 #include <asm/hardware/dec21285.h>
  32 #include <asm/io.h>
  33 #include <asm/mach-types.h>
  34 #include <asm/uaccess.h>
  35
  36 /*****************************************************************************/
  37 #include <asm/nwflash.h>
  38
  39 #define NWFLASH_VERSION "6.4"
  40
  41 static DEFINE_MUTEX(flash_mutex);
  42 static void kick_open(void);
  43 static int get_flash_id(void);
  44 static int erase_block(int nBlock);
  45 static int write_block(unsigned long p, const char __user *buf, int count);
  46
  47 #define KFLASH_SIZE     1024*1024       //1 Meg
  48 #define KFLASH_SIZE4    4*1024*1024     //4 Meg
  49 #define KFLASH_ID       0x89A6          //Intel flash
  50 #define KFLASH_ID4      0xB0D4          //Intel flash 4Meg
  51
  52 static bool flashdebug;         //if set - we will display progress msgs
  53
  54 static int gbWriteEnable;
  55 static int gbWriteBase64Enable;
  56 static volatile unsigned char *FLASH_BASE;
  57 static int gbFlashSize = KFLASH_SIZE;
  58 static DEFINE_MUTEX(nwflash_mutex);
  59
  60 static int get_flash_id(void)
  61 {
  62         volatile unsigned int c1, c2;
  63
  64         /*
  65          * try to get flash chip ID
  66          */
  67         kick_open();
  68         c2 = inb(0x80);
  69         *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x90;
  70         udelay(15);
  71         c1 = *(volatile unsigned char *) FLASH_BASE;
  72         c2 = inb(0x80);
  73
  74         /*
  75          * on 4 Meg flash the second byte is actually at offset 2...
  76          */
  77         if (c1 == 0xB0)
  78                 c2 = *(volatile unsigned char *) (FLASH_BASE + 2);
  79         else
  80                 c2 = *(volatile unsigned char *) (FLASH_BASE + 1);
  81
  82         c2 += (c1 << 8);
  83
  84         /*
  85          * set it back to read mode
  86          */
  87         *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
  88
  89         if (c2 == KFLASH_ID4)
  90                 gbFlashSize = KFLASH_SIZE4;
  91
  92         return c2;
  93 }
  94
  95 static long flash_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
  96 {
  97         mutex_lock(&flash_mutex);
  98         switch (cmd) {
  99         case CMD_WRITE_DISABLE:
 100                 gbWriteBase64Enable = 0;
 101                 gbWriteEnable = 0;
 102                 break;
 103
 104         case CMD_WRITE_ENABLE:
 105                 gbWriteEnable = 1;
 106                 break;
 107
 108         case CMD_WRITE_BASE64K_ENABLE:
 109                 gbWriteBase64Enable = 1;
 110                 break;
 111
 112         default:
 113                 gbWriteBase64Enable = 0;
 114                 gbWriteEnable = 0;
 115                 mutex_unlock(&flash_mutex);
 116                 return -EINVAL;
 117         }
 118         mutex_unlock(&flash_mutex);
 119         return 0;
 120 }
 121
 122 static ssize_t flash_read(struct file *file, char __user *buf, size_t size,
 123                           loff_t *ppos)
 124 {
 125         ssize_t ret;
 126
 127         if (flashdebug)
 128                 printk(KERN_DEBUG "flash_read: flash_read: offset=0x%llx, "
 129                        "buffer=%p, count=0x%zx.\n", *ppos, buf, size);
 130         /*
 131          * We now lock against reads and writes. --rmk
 132          */
 133         if (mutex_lock_interruptible(&nwflash_mutex))
 134                 return -ERESTARTSYS;
 135
 136         ret = simple_read_from_buffer(buf, size, ppos, (void *)FLASH_BASE, gbFlashSize);
 137         mutex_unlock(&nwflash_mutex);
 138
 139         return ret;
 140 }
 141
 142 static ssize_t flash_write(struct file *file, const char __user *buf,
 143                            size_t size, loff_t * ppos)
 144 {
 145         unsigned long p = *ppos;
 146         unsigned int count = size;
 147         int written;
 148         int nBlock, temp, rc;
 149         int i, j;
 150
 151         if (flashdebug)
 152                 printk("flash_write: offset=0x%lX, buffer=0x%p, count=0x%X.\n",
 153                        p, buf, count);
 154
 155         if (!gbWriteEnable)
 156                 return -EINVAL;
 157
 158         if (p < 64 * 1024 && (!gbWriteBase64Enable))
 159                 return -EINVAL;
 160
 161         /*
 162          * check for out of range pos or count
 163          */
 164         if (p >= gbFlashSize)
 165                 return count ? -ENXIO : 0;
 166
 167         if (count > gbFlashSize - p)
 168                 count = gbFlashSize - p;
 169
 170         if (!access_ok(VERIFY_READ, buf, count))
 171                 return -EFAULT;
 172
 173         /*
 174          * We now lock against reads and writes. --rmk
 175          */
 176         if (mutex_lock_interruptible(&nwflash_mutex))
 177                 return -ERESTARTSYS;
 178
 179         written = 0;
 180
 181         nBlock = (int) p >> 16; //block # of 64K bytes
 182
 183         /*
 184          * # of 64K blocks to erase and write
 185          */
 186         temp = ((int) (p + count) >> 16) - nBlock + 1;
 187
 188         /*
 189          * write ends at exactly 64k boundary?
 190          */
 191         if (((int) (p + count) & 0xFFFF) == 0)
 192                 temp -= 1;
 193
 194         if (flashdebug)
 195                 printk(KERN_DEBUG "flash_write: writing %d block(s) "
 196                         "starting at %d.\n", temp, nBlock);
 197
 198         for (; temp; temp--, nBlock++) {
 199                 if (flashdebug)
 200                         printk(KERN_DEBUG "flash_write: erasing block %d.\n", nBlock);
 201
 202                 /*
 203                  * first we have to erase the block(s), where we will write...
 204                  */
 205                 i = 0;
 206                 j = 0;
 207           RetryBlock:
 208                 do {
 209                         rc = erase_block(nBlock);
 210                         i++;
 211                 } while (rc && i < 10);
 212
 213                 if (rc) {
 214                         printk(KERN_ERR "flash_write: erase error %x\n", rc);
 215                         break;
 216                 }
 217                 if (flashdebug)
 218                         printk(KERN_DEBUG "flash_write: writing offset %lX, "
 219                                "from buf %p, bytes left %X.\n", p, buf,
 220                                count - written);
 221
 222                 /*
 223                  * write_block will limit write to space left in this block
 224                  */
 225                 rc = write_block(p, buf, count - written);
 226                 j++;
 227
 228                 /*
 229                  * if somehow write verify failed? Can't happen??
 230                  */
 231                 if (!rc) {
 232                         /*
 233                          * retry up to 10 times
 234                          */
 235                         if (j < 10)
 236                                 goto RetryBlock;
 237                         else
 238                                 /*
 239                                  * else quit with error...
 240                                  */
 241                                 rc = -1;
 242
 243                 }
 244                 if (rc < 0) {
 245                         printk(KERN_ERR "flash_write: write error %X\n", rc);
 246                         break;
 247                 }
 248                 p += rc;
 249                 buf += rc;
 250                 written += rc;
 251                 *ppos += rc;
 252
 253                 if (flashdebug)
 254                         printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written);
 255         }
 256
 257         mutex_unlock(&nwflash_mutex);
 258
 259         return written;
 260 }
 261
 262
 263 /*
 264  * The memory devices use the full 32/64 bits of the offset, and so we cannot
 265  * check against negative addresses: they are ok. The return value is weird,
 266  * though, in that case (0).
 267  *
 268  * also note that seeking relative to the "end of file" isn't supported:
 269  * it has no meaning, so it returns -EINVAL.
 270  */
 271 static loff_t flash_llseek(struct file *file, loff_t offset, int orig)
 272 {
 273         loff_t ret;
 274
 275         mutex_lock(&flash_mutex);
 276         if (flashdebug)
 277                 printk(KERN_DEBUG "flash_llseek: offset=0x%X, orig=0x%X.\n",
 278                        (unsigned int) offset, orig);
 279
 280         switch (orig) {
 281         case 0:
 282                 if (offset < 0) {
 283                         ret = -EINVAL;
 284                         break;
 285                 }
 286
 287                 if ((unsigned int) offset > gbFlashSize) {
 288                         ret = -EINVAL;
 289                         break;
 290                 }
 291
 292                 file->f_pos = (unsigned int) offset;
 293                 ret = file->f_pos;
 294                 break;
 295         case 1:
 296                 if ((file->f_pos + offset) > gbFlashSize) {
 297                         ret = -EINVAL;
 298                         break;
 299                 }
 300                 if ((file->f_pos + offset) < 0) {
 301                         ret = -EINVAL;
 302                         break;
 303                 }
 304                 file->f_pos += offset;
 305                 ret = file->f_pos;
 306                 break;
 307         default:
 308                 ret = -EINVAL;
 309         }
 310         mutex_unlock(&flash_mutex);
 311         return ret;
 312 }
 313
 314
 315 /*
 316  * assume that main Write routine did the parameter checking...
 317  * so just go ahead and erase, what requested!
 318  */
 319
 320 static int erase_block(int nBlock)
 321 {
 322         volatile unsigned int c1;
 323         volatile unsigned char *pWritePtr;
 324         unsigned long timeout;
 325         int temp, temp1;
 326
 327         /*
 328          * reset footbridge to the correct offset 0 (...0..3)
 329          */
 330         *CSR_ROMWRITEREG = 0;
 331
 332         /*
 333          * dummy ROM read
 334          */
 335         c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
 336
 337         kick_open();
 338         /*
 339          * reset status if old errors
 340          */
 341         *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
 342
 343         /*
 344          * erase a block...
 345          * aim at the middle of a current block...
 346          */
 347         pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + 0x8000 + (nBlock << 16)));
 348         /*
 349          * dummy read
 350          */
 351         c1 = *pWritePtr;
 352
 353         kick_open();
 354         /*
 355          * erase
 356          */
 357         *(volatile unsigned char *) pWritePtr = 0x20;
 358
 359         /*
 360          * confirm
 361          */
 362         *(volatile unsigned char *) pWritePtr = 0xD0;
 363
 364         /*
 365          * wait 10 ms
 366          */
 367         msleep(10);
 368
 369         /*
 370          * wait while erasing in process (up to 10 sec)
 371          */
 372         timeout = jiffies + 10 * HZ;
 373         c1 = 0;
 374         while (!(c1 & 0x80) && time_before(jiffies, timeout)) {
 375                 msleep(10);
 376                 /*
 377                  * read any address
 378                  */
 379                 c1 = *(volatile unsigned char *) (pWritePtr);
 380                 //              printk("Flash_erase: status=%X.\n",c1);
 381         }
 382
 383         /*
 384          * set flash for normal read access
 385          */
 386         kick_open();
 387 //      *(volatile unsigned char*)(FLASH_BASE+0x8000) = 0xFF;
 388         *(volatile unsigned char *) pWritePtr = 0xFF;   //back to normal operation
 389
 390         /*
 391          * check if erase errors were reported
 392          */
 393         if (c1 & 0x20) {
 394                 printk(KERN_ERR "flash_erase: err at %p\n", pWritePtr);
 395
 396                 /*
 397                  * reset error
 398                  */
 399                 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
 400                 return -2;
 401         }
 402
 403         /*
 404          * just to make sure - verify if erased OK...
 405          */
 406         msleep(10);
 407
 408         pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + (nBlock << 16)));
 409
 410         for (temp = 0; temp < 16 * 1024; temp++, pWritePtr += 4) {
 411                 if ((temp1 = *(volatile unsigned int *) pWritePtr) != 0xFFFFFFFF) {
 412                         printk(KERN_ERR "flash_erase: verify err at %p = %X\n",
 413                                pWritePtr, temp1);
 414                         return -1;
 415                 }
 416         }
 417
 418         return 0;
 419
 420 }
 421
 422 /*
 423  * write_block will limit number of bytes written to the space in this block
 424  */
 425 static int write_block(unsigned long p, const char __user *buf, int count)
 426 {
 427         volatile unsigned int c1;
 428         volatile unsigned int c2;
 429         unsigned char *pWritePtr;
 430         unsigned int uAddress;
 431         unsigned int offset;
 432         unsigned long timeout;
 433         unsigned long timeout1;
 434
 435         pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
 436
 437         /*
 438          * check if write will end in this block....
 439          */
 440         offset = p & 0xFFFF;
 441
 442         if (offset + count > 0x10000)
 443                 count = 0x10000 - offset;
 444
 445         /*
 446          * wait up to 30 sec for this block
 447          */
 448         timeout = jiffies + 30 * HZ;
 449
 450         for (offset = 0; offset < count; offset++, pWritePtr++) {
 451                 uAddress = (unsigned int) pWritePtr;
 452                 uAddress &= 0xFFFFFFFC;
 453                 if (__get_user(c2, buf + offset))
 454                         return -EFAULT;
 455
 456           WriteRetry:
 457                 /*
 458                  * dummy read
 459                  */
 460                 c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
 461
 462                 /*
 463                  * kick open the write gate
 464                  */
 465                 kick_open();
 466
 467                 /*
 468                  * program footbridge to the correct offset...0..3
 469                  */
 470                 *CSR_ROMWRITEREG = (unsigned int) pWritePtr & 3;
 471
 472                 /*
 473                  * write cmd
 474                  */
 475                 *(volatile unsigned char *) (uAddress) = 0x40;
 476
 477                 /*
 478                  * data to write
 479                  */
 480                 *(volatile unsigned char *) (uAddress) = c2;
 481
 482                 /*
 483                  * get status
 484                  */
 485                 *(volatile unsigned char *) (FLASH_BASE + 0x10000) = 0x70;
 486
 487                 c1 = 0;
 488
 489                 /*
 490                  * wait up to 1 sec for this byte
 491                  */
 492                 timeout1 = jiffies + 1 * HZ;
 493
 494                 /*
 495                  * while not ready...
 496                  */
 497                 while (!(c1 & 0x80) && time_before(jiffies, timeout1))
 498                         c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
 499
 500                 /*
 501                  * if timeout getting status
 502                  */
 503                 if (time_after_eq(jiffies, timeout1)) {
 504                         kick_open();
 505                         /*
 506                          * reset err
 507                          */
 508                         *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
 509
 510                         goto WriteRetry;
 511                 }
 512                 /*
 513                  * switch on read access, as a default flash operation mode
 514                  */
 515                 kick_open();
 516                 /*
 517                  * read access
 518                  */
 519                 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
 520
 521                 /*
 522                  * if hardware reports an error writing, and not timeout -
 523                  * reset the chip and retry
 524                  */
 525                 if (c1 & 0x10) {
 526                         kick_open();
 527                         /*
 528                          * reset err
 529                          */
 530                         *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
 531
 532                         /*
 533                          * before timeout?
 534                          */
 535                         if (time_before(jiffies, timeout)) {
 536                                 if (flashdebug)
 537                                         printk(KERN_DEBUG "write_block: Retrying write at 0x%X)n",
 538                                                pWritePtr - FLASH_BASE);
 539
 540                                 /*
 541                                  * wait couple ms
 542                                  */
 543                                 msleep(10);
 544
 545                                 goto WriteRetry;
 546                         } else {
 547                                 printk(KERN_ERR "write_block: timeout at 0x%X\n",
 548                                        pWritePtr - FLASH_BASE);
 549                                 /*
 550                                  * return error -2
 551                                  */
 552                                 return -2;
 553
 554                         }
 555                 }
 556         }
 557
 558         msleep(10);
 559
 560         pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
 561
 562         for (offset = 0; offset < count; offset++) {
 563                 char c, c1;
 564                 if (__get_user(c, buf))
 565                         return -EFAULT;
 566                 buf++;
 567                 if ((c1 = *pWritePtr++) != c) {
 568                         printk(KERN_ERR "write_block: verify error at 0x%X (%02X!=%02X)\n",
 569                                pWritePtr - FLASH_BASE, c1, c);
 570                         return 0;
 571                 }
 572         }
 573
 574         return count;
 575 }
 576
 577
 578 static void kick_open(void)
 579 {
 580         unsigned long flags;
 581
 582         /*
 583          * we want to write a bit pattern XXX1 to Xilinx to enable
 584          * the write gate, which will be open for about the next 2ms.
 585          */
 586         raw_spin_lock_irqsave(&nw_gpio_lock, flags);
 587         nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
 588         raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 589
 590         /*
 591          * let the ISA bus to catch on...
 592          */
 593         udelay(25);
 594 }
 595
 596 static const struct file_operations flash_fops =
 597 {
 598         .owner          = THIS_MODULE,
 599         .llseek         = flash_llseek,
 600         .read           = flash_read,
 601         .write          = flash_write,
 602         .unlocked_ioctl = flash_ioctl,
 603 };
 604
 605 static struct miscdevice flash_miscdev =
 606 {
 607         FLASH_MINOR,
 608         "nwflash",
 609         &flash_fops
 610 };
 611
 612 static int __init nwflash_init(void)
 613 {
 614         int ret = -ENODEV;
 615
 616         if (machine_is_netwinder()) {
 617                 int id;
 618
 619                 FLASH_BASE = ioremap(DC21285_FLASH, KFLASH_SIZE4);
 620                 if (!FLASH_BASE)
 621                         goto out;
 622
 623                 id = get_flash_id();
 624                 if ((id != KFLASH_ID) && (id != KFLASH_ID4)) {
 625                         ret = -ENXIO;
 626                         iounmap((void *)FLASH_BASE);
 627                         printk("Flash: incorrect ID 0x%04X.\n", id);
 628                         goto out;
 629                 }
 630
 631                 printk("Flash ROM driver v.%s, flash device ID 0x%04X, size %d Mb.\n",
 632                        NWFLASH_VERSION, id, gbFlashSize / (1024 * 1024));
 633
 634                 ret = misc_register(&flash_miscdev);
 635                 if (ret < 0) {
 636                         iounmap((void *)FLASH_BASE);
 637                 }
 638         }
 639 out:
 640         return ret;
 641 }
 642
 643 static void __exit nwflash_exit(void)
 644 {
 645         misc_deregister(&flash_miscdev);
 646         iounmap((void *)FLASH_BASE);
 647 }
 648
 649 MODULE_LICENSE("GPL");
 650
 651 module_param(flashdebug, bool, 0644);
 652
 653 module_init(nwflash_init);
 654 module_exit(nwflash_exit);